V. K. Engineering - Buying & Selling of Machines made easy

Category : Grinding Machines

Sub-Category : Grinder Cylindrical

Total Machines Found : 193

Select

| Machine Details

ID	MI11423
Make	Fortuna
Model
YOM
Condition	Good Condition
Photo	See Photo
Center Height: 280 mm Max Swing: 560 mm Between Centers: 2,500 mm It was conventional upgraded to HMI Upgraded in Europe with Siemens HMI Accessories 2 off Steady Rest 2 off Follow Rest Few Dead and Revolving Centers Grinding Wheels Wheel Flanges

ID	MI11399
Make	STANKO
Model
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 2000 mm Center Height: 250 mm Grinding diameter: 500 mm Grinding Wheel Dia: 400 mm Grinding Wheel Width: 80 mm

ID	MI11372
Make	WMW
Model	SU315x2000
YOM
Condition	Good Condition
Photo	See Photo
2000 mm Center Height 200

ID	MI11345
Make	FARTUNA
Model
YOM
Condition	Good Condition
Photo	See Photo
1500. Between centre 175Mm centre hight FARTUNE ID. &OD

ID	MA39422
Make	COREMA
Model	RU2000
YOM
Condition	Good Condition
Photo	See Photo
Centres height 200 mm Max. grinding length 2000 mm

ID	MA39420
Make	Naxos Union,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Centres height 200 mm Max. grinding length 2000 mm Wheel dimensions � 450 mm

ID	MI11237
Make	PARISHUDH
Model	GCU200S-327
YOM
Condition	Good Condition
Photo	See Photo
Table : Precision 3 Jaw Chuck with adapter dia 100mm

ID	MA39187
Make	STANKO
Model	3M197
YOM
Condition	Good Condition
Photo	See Photo
centres height : 410 mm centres distance : 6000 mm max groundable diameter : 800 mm wheel diameter : max 750 mm wheel breadth : 100 mm increases : yes hydraulic controls: yes tailstock : yes steady rests : yes weight : 43.400 kg

ID	MI11203
Make	TOS
Model	BH25
YOM
Condition	Good Condition
Photo	See Photo
Dia - 250 mm Length - 1500 mm

ID	MA38967
Make	Haubold Chemnitz; German
Model
YOM	1965 Reconditioned in 2017
Condition	Good Condition
Photo	See Photo
largest external grinding diameter 800 mm largest grinding length 4000 mm height of centers above table 550 mm largest spacing of centers 5500 mm number of workpiece spindle revolutions 4- 32 rpm number of grinding wheel revolutions 610 rpm range of table speeds 10-65 engine power 19 kW dimensions of grinding wheel 600x60x250mm

ID	MI11144
Make	ZIERSCH & BALTRUCH
Model	135 x 1000
YOM
Condition	Good Condition
Photo	See Photo
WHEEL DIAMETER : 60 x 350 MM CENTRE HEIGHT : 135 MM CENTRE DISTANCE :1000 MM TOTAL POWER REQUIREMENT : 7.5 KW WEIGHT OF THE MACHINE CA. : 3600 KG

ID	MI11142
Make	TOS
Model	BHE 963/3000
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 3000 mm Center Height: 330 mm Grinding diameter: 660 mm

ID	MA38847
Make	Cincinnati Milacron,Austria
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
EQUIPPED WITH: Sony Single Axis Digital Readout Updated Workhead w/Emerson Variable Speed Drive 2 Follow Rests Lever & Screw Type Tailstock Filmatic Spindle Bearings Coolant System w/Barnes Magnetic Seperator CATALOG SPECIFICATIONS: Swing Over Table, Maximum 10.937" Grinding Diameter, Maximum 10" Distance Between Centers, Maximum 96" Grinding Wheel Diameter, Standard 30" Grinding Wheel Width, Maximum 3" Grinding Wheel Hole Diameter 20" Table Swivel Taper Toward Wheelhead 2.75" TPF Table Swivel Taper Away Wheelhead 1" TPF Table Swivel Angle Toward Wheelhead 6-DEGREES Table Swivel Angle Away Wheelhead 2-DEGREES Workhead and Tailstock Center Tapers #12 B&S Table Longitudinal Feeds, Infinite 3 to 220 IPM Grinding Wheelhead Spindle Motor 15 HP/1760 RPM Floor Space Required, L x D 290" x 84" Weight, Approximately 15100 LBS

ID	MI11030
Make	STANKO
Model	3Y144MB
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 2000 mm Center Height: 250 mm Grinding diameter: 500 mm Grinding Wheel Dia: 400 mm Grinding Wheel Width: 80 mm

ID	MI11029
Make	TOS - Hostivar (Czech Republic)
Model	B40U/2000
YOM
Condition	Good Condition
Photo	See Photo
Center Height - 205 mm Max. Diameter of Job - 400 mm Max. Length of Job - 2000 mm Grinding Wheel Size - Diameter 500 mm x 75 mm Width Least Count - 5 Microns (0.005 mm) Work-Head Speed - 15 rpm to 375 rpm Features like Delay, Plunge Grinding, Automatic Depth Adjustment etc. Complete with 2 x Job Steady, Wheel Dresser, Hydraulic Tail-Stock.

ID	MI11013
Make	TOS
Model	BU28
YOM
Condition	Good Condition
Photo	See Photo
Swing 295mm Between Center 1000mm Grinding Wheel Size 400 x 40 x 127mm Max Width of Grinding Wheel 63mm Floor Space 3950 x 1650mm

ID	MI10946
Make	Johnshipmen
Model
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Admit Between Center: 700mm Center Hight: 130mm Swing Dia: 260mm Wheel dimensions: 300 mm x 25 mm Work-Head Speeds: 25 rpm to 300 rpm

ID	MI10889
Make	Grisetti,Italian
Model
YOM
Condition	Good Condition
Photo	See Photo
Bed Length - 600 mm Centre - 150 mm

ID	MI10873
Make	Zocca,Italy
Model	RU3000
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Centres distance 3000 mm Centres height 700 mm Max grinding lenght 2000 mm Max grinding diameter 620 mm Bed Tapper Hence :700mm

ID	MI10845
Make	Tos Hostivar
Model	BUA31/2000
YOM
Condition	Good Condition
Photo	See Photo
* ⁠Center Height - 160 mm * ⁠Max. Diameter of Job - 320 mm * ⁠Length of Job - 2000 mm * ⁠Grinding Wheel Diameter - 500 mm * ⁠Grinding Wheel Width - 75 mm - Equipped with Internal Grinding Attachment. - With Hydraulic Rapid Forward/Backward Movement of Wheel-head. - Swivel-type Grinding Wheel-head. - With 1x 3-point steady

ID	MI10765
Make	TOS
Model	BHU 25
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Maximum grinding length: 600 mm Center Height: 145 mm Grinding diameter: 290 mm

ID	MI10713
Make	GER
Model
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Maximum grinding length: 450 mm Center Height: 180 mm Grinding diameter: 360 mm

ID	MA38362
Make	Farrel
Model
YOM	1960
Condition	Good Condition
Photo	See Photo \| See Video
Centre height - 570 mm Grinding � - 1140 mm Grinding length - 6000 mm Grinding stone dimensions - 1080 x 180 mm Grinding stone speeds - 400 - 1000 Rpm Tailstock - 165 x 780 Mk Coolant system - Yes Filtration - Yes Dimensions (Estimate) Length - 10560 mm Width - 3600 mm Height - 3200 mm Weight - 55000 kg

ID	MI10709
Make	TOS
Model
YOM
Condition	Good Condition
Photo	See Photo
Between center -630mm Center height -200mm Swing -400mm With internal

ID	MI10708
Make	MSO,German
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1000 mm abc x 130mm centre height Cylindrical Grinding Machine with Internal Grinding

ID	MI10696
Make	Tacota Tapella
Model
YOM
Condition	Good Condition
Photo	See Photo
1000mm abc x 130mm centre height Cylindrical Grinding In excellent condition

ID	MI10693
Make	Supertech
Model
YOM
Condition	Good Condition
Photo	See Photo
LENGTH 600 CENTER HEIGTH 200mm

ID	MI10691
Make	TOS
Model
YOM
Condition	Good Condition
Photo	See Photo
Cylindrical Grinding ID & OD Between 800mm Centre hight 150mm 300mm OD swing Good Running continues

ID	MA38216
Make	Acros,Italy
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity 400 x 2,000 mm Wheel dia 400 mm Wheel width 100 mm Centres Height 220 mm Complete with: - Steadies - Coolant - Marposs gauge

ID	MI10492
Make	HMT
Model	G22
YOM
Condition	Good Condition
Photo	See Photo \| See Video
2mtr between centre 225 centre height

ID	MI10491
Make	TOS
Model
YOM
Condition	Good Condition
Photo	See Photo
3000x630 mm

ID	MI10490
Make	Fortuna
Model
YOM
Condition	Good Condition
Photo	See Photo
Abc - 2500mm CH - 190mm Rapid in wheel head Equipped with - Studie Guides Dresser coolant tank coolant pump extra centers

ID	MI10489
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
2000x440 mm

ID	MI10488
Make	TITAN
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
2500x380 mm

ID	MA38079
Make	German
Model
YOM
Condition	Good Condition
Photo	See Photo
Max. Grinding Length . 500 mm Max. Grinding Dia . 300 mm Dia Grinding Wheel . 400 mm c/w Steady & Grinding wheels LWH 2.3 x 1.7 x 1.7 m Appr. 3,500 kg

ID	MA38076
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Center-distance: 800nmm Center-height: 100nmm Grinding diameter: 200 mm Grinding-stone-diameter: 400 mm Table: 1,000 x200mm Including multiple tools and peripherals App 2,5 x1,5 x1,6 m App weight: 4,200 kg

ID	MA38075
Make	Schmalz
Model
YOM
Condition	Good Condition
Photo	See Photo
Max. Grinding length 2,000 mm Max. Grinding Wheel dia 450 mm Centers Height 200 mm App. Weight 9,000 kg

ID	MI10447
Make	Cincinnati
Model
YOM
Condition	Good Condition
Photo	See Photo
Centre height 390 mm Distance between centres 3000 mm Grinding wheel: Diameter 600 mm Width 80 mm Bore 305 mm Max. grinding diameter 600 mm Workpiece weight on centres max. 400 kg Grinding wheel speeds: Peripheral speed 30 m/s Angular displacement � Work piece spindle head: speeds: number (steps) 6 from 16 rpm up to 168 rpm Spindle hole 38 mm Spindle taper: 5 MT Taper in tailstock: 5 MT Table angular displacement +/-10 � Table speed: stepless from 0.1 m/min up to 6 m/min Voltage 50 Hz 3x 380 Volt External Grinding wheel motor 15 kW Workpiece spindle motor 2.2 kW Machine�s weight about 8000 kg Overall dimensions machine: Length 4400 mm Width 2300 mm Height 2250 mm Various accessories: Coolant system 450 L Flange with wheel Lamp Hydraulic tailstock

ID	MI10446
Make	Micromatic
Model
YOM
Condition	Good Condition
Photo	See Photo
Angular CNC grinding 700mm ABC -700mm Swing - 350mm Wheel Dia 600mm

ID	MI10441
Make	Fortuna
Model
YOM
Condition	Good Condition
Photo	See Photo
Max. Job Diameter - 270 mm Max. Length of Job - 1000 mm Grinding Wheel Diameter - 600 mm Grinding Wheel Width - 100 mm - Equipped with a Wheel-Top Mounted Hydraulic Wheel Dresser. - Features like Rough Cut, Finish Cut, Spark-Out, Auto-Wheel Retraction. - Machine can work in complete Auto-Cycle mode. - Complete with Magnetic-and-Paper-type Coolant Filtration Unit. - Machine is in excellent working condition.

ID	MI10356
Make	Tos Hostivar
Model
YOM
Condition	Good Condition
Photo	See Photo
Between center - 630 Center height - 200mm Swing - 400mm Dro& internal

ID	MI10301
Make	LIVNICA KIKINDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Length 1100 mm center height 180 Automatic profile Template dressing Auto cut Only OD

ID	MI10298
Make	Tipo (Italian)
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
OD ID Grinding Machine* Universal Cylindrical ID OD Grinding Machine, Centre height :- 150mm, Between centre :- 1100, Max. OD :- 300mm, with Hydraulic Power Pack UOM - Nos

ID	MI10219
Make	Jones & Shipman
Model	1300
YOM	2009
Condition	Good Condition
Photo	See Photo
Center height :-225mm, Grinding Dia :- 250mm Length :- 650mm

ID	MA37625
Make	TOS
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Max grinding diameter . 630 mm Max. grinding length . 3,000 mm Grinding wheel diameter . 750 mm Grinding wheel width . 150 mm Max. weight between centres . 2,500 kg

ID	MI10048
Make	Universal
Model	BHU 25
YOM
Condition	Good Condition
Photo	See Photo
enter Height - 145 mm Max. Job Diameter - 280 mm Max. Length of Job - 1000 mm Grinding Wheel Size - Diameter 400 mm x 50 mm Width Least Count - 1 Micron (0.001 mm) Work-Head Speeds - 22.4 rpm to 710 rpm - Equipped with Internal Grinding Attachment. - Features like Delay, Plunge Grinding, Rapid Travel of Table etc. - Features like Auto-Cut, Auto-Compensation, Spark-Out, Auto-Cycle etc. - Equipped with Hydraulic Tail-Stock. - Complete with Coolant Tank, Pump, Splash guards. - Electrical Drawings for the machine are available. - Machine is in excellent working condition.

ID	MI10003
Make	TOS
Model	BHU32A
YOM
Condition	Good Condition
Photo	See Photo
Center to center 700 Center height 160 mm

ID	MI9978
Make	SIT
Model	U700
YOM
Condition	Good Condition
Photo	See Photo
Grinding Lengh: 700 mm Center height: 150 mm Swing dia: 300 mm Max. wheel speed: 40000 rpm Spindle motor power: 4 kW Weight: 2500 kg

ID	MI9952
Make	Fortuna
Model
YOM
Condition	Good Condition
Photo	See Photo
length 1500 mm Dia - 450 m

ID	MI9949
Make	Landis
Model
YOM
Condition	Good Condition
Photo	See Photo
CENTER HEIGHT 350 SWING 700 ID OD LENGTH 3000

ID	MA37431
Make	Tos Hostivar
Model	BUC63B
YOM
Condition	Good Condition
Photo	See Photo
▪ display ▪ high of centre: 315 mm ▪ distance between centre: 4000 mm ▪ max. external grinding diam.: 630 mm ▪ external wheel diameter: 750x125 mm ▪ external wheel rpm: 970 rpm ▪ system of diamond ▪ tailstock: hydraulic ▪ steady rests ▪ hanging of control ▪ texture cleaner ▪ anti accident protect ▪ weight: 16.000 Kg ▪ integral overhauled ▪ capacity 2500 Kg

ID	MA37426
Make	TOS
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Max grinding diameter . 630 mm Max. grinding length . 3,000 mm Grinding wheel diameter . 750 mm Grinding wheel width . 150 mm Max. weight between centres . 2,500 kg

ID	MI9912
Make	Cometa
Model	RHU1600
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Admit Between Center: 1600mm Center Hight: 200mm Swing Dia: 400mm

ID	MI9872
Make	Paragon
Model	GU-3250P
YOM
Condition	Good Condition
Photo	See Photo \| See Video
MAX GRINDING DIA 280 MM GRINDING LENGTH 500 MM GU-3250P

ID	MI9825
Make	Okuma
Model
YOM
Condition	Good Condition
Photo	See Photo
CENTRE HEIGHT : 150 LENGTH:2000MM FULL AUTO

ID	MA37240
Make	TOS
Model	BUC63A/3000
YOM
Condition	Good Condition
Photo	See Photo
Swing over bed 630 mm Distance between centres 3000 mm Workpiece weight 3000 kg Machine weight 13900 kg

ID	MA37088
Make	Okuma
Model
YOM
Condition	Good Condition
Photo	See Photo
2200*430 mm

ID	MI9470
Make	WMW
Model	SA 200 x 800
YOM
Condition	Good Condition
Photo	See Photo
Center height-100 mm Max. grinding diameter-200 mm Center Lenght - 800 mm Dimensions approx LxWxH 3x1.5x1.7 meters Weight- 4100 kg

ID	MI9435
Make	TOS
Model	BUB40A
YOM
Condition	Good Condition
Photo	See Photo
Swing 400 x 2000 mm

ID	MI9428
Make	TOS
Model	BHU32A
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 1000 mm Center Height: 160 mm Grinding diameter: 320 mm

ID	MI9427
Make	TOS
Model	BHU32A/1000
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 1000 mm Center Height: 160 mm Grinding diameter: 320 mm

ID	MI9426
Make	TITAN
Model	RU350
YOM
Condition	Good Condition
Photo	See Photo
Admit Between Center: 1700mm Center Hight: 175mm Swing Dia: 350mm

ID	MI9425
Make	Favretto
Model	4000
YOM
Condition	Good Condition
Photo	See Photo
Admit Between Center: 4000mm Center Hight: 400mm Swing Dia: 800mm

ID	MI9424
Make	TOS
Model	BHU50A
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 2000 mm Center Height: 250 mm Grinding diameter: 500 mm Grinding Wheel Size: 500x100 mm

ID	MI9423
Make	Takota
Model	1200
YOM
Condition	Good Condition
Photo	See Photo
Grinding Length: 1200 mm Center height: 200 mm Swing: 400 mm

ID	MI9422
Make	Tapella
Model	1200
YOM
Condition	Good Condition
Photo	See Photo
Grinding Length: 1200 mm Center height: 175 mm Swing: 360 mm

ID	MI9421
Make	Jones & Shipman
Model	1212
YOM
Condition	Good Condition
Photo	See Photo
Admit Between Center: 300mm Center Hight: 65mm Swing Dia: 125mm Wheel dimensions: 250 mm Weight Machine: 1000 Kg

ID	MI9420
Make	Cometa
Model	RHU1600
YOM
Condition	Good Condition
Photo	See Photo
Admit Between Center: 1500mm Center Hight: 200mm Swing Dia: 400mm

ID	MA36907
Make	Toyoda,Japan
Model
YOM
Condition
Photo	See Photo
Swing dia : 320mm x 1000mm

ID	MI9300
Make	Junker
Model	BUAJ28/1000
YOM
Condition	Good Condition
Photo	See Photo
Swing : 280mm Distance Between Center : 1000mm Maximum Wheeel Head : 385mm Wheel Head Swivel : +-45 Grinding Wheel Diameter :400x50x127 Equipped With Internal Grinding Attachment Auto cycle Spindle Lubrication Unit Coolent Tank

ID	MI9287
Make	Jotes
Model
YOM
Condition	Good Condition
Photo	See Photo
Between Center : 1250mm Center height :135mmswing : 270mm with Internal hydraulic

ID	MI9286
Make	Gendron
Model
YOM
Condition	Good Condition
Photo	See Photo
1200mm Between center Center Height :250mm

ID	MI9285
Make	Karsten-Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Between Center : 1200mm Swing :300 ID AND OD ATTACHED Hydraulic

ID	MI9224
Make	Tos Hostivar
Model	BUB40/1500
YOM
Condition	Good Condition
Photo	See Photo
With ID & OD Centre height 205 mm swing Dia 410 mm Between centre 1500 mm With Coolent Tank

ID	MA36664
Make	Clichy - CC
Model
YOM
Condition	Good Condition
Photo	See Photo
Internal External Cylindrical Grinder Length between centers 1500 mm Useful diameter 400 mm Wheels Diam 400 x bore 120 x width 130 mm Maximum weight allowed between points 500 kg (to be checked) Watering Internal grinding and �

ID	MA36663
Make	Clichy - CC
Model
YOM
Condition	Good Condition
Photo	See Photo
Internal External Cylindrical Grinder Length between centers 1500 mm Useful diameter 400 mm Wheels Diam 400 x bore 120 x width 130 mm Maximum weight allowed between points 500 kg (to be checked) Watering Correction �

ID	MA36662
Make	STANKO
Model
YOM
Condition	Good Condition
Photo	See Photo
External Cylindrical Grinder Length between centers 2700 mm Useful diameter 430 mm Table 4200 x 500 Wheels Diam 750 x bore 300 x width 80 mm Watering Transport dimensions: L 7000 x W 2300 x H 2400 mm Dimensions in production (footprint �

ID	MA36454
Make	Studer
Model	S40
YOM
Condition	Good Condition
Photo	See Photo
turning speed range 600 - 6000 U/min

ID	MI8691
Make	Ribon
Model	RUR-1000
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Admit Between Center: 1000mm Center Hight: 160mm Swing Dia: 320mm

ID	MI8690
Make	Jones & Shipman
Model	1305
YOM
Condition	Good Condition
Photo	See Photo
Technical Specification: Admit Between Center: 1000mm Center Hight: 130mm Swing Dia: 260mm Wheel Dia: 350 mm x 40 mm Work-Head Speeds: 40 - 320 rpm Max. Internal Spindle Speed: 24,000 rpm

ID	MI8520
Make	MSO,Germany
Model	FH200
YOM
Condition	Good Condition
Photo	See Photo
Admit between centre : 800mm Centre height : 130mm Wheel size : 500mm dia Wheel width : 100mm

ID	MI8440
Make	HMT,India
Model	K150U
YOM
Condition	Good Condition
Photo	See Photo
HMT Cylindrical grinding machine. Brand : HMT Model : K150U ( Universal - ID & OD ) Specifications : Length : 800mm between center. I.e. Center to Tailstock. Center height : 150mm X - Hydraulic i.e. Table movement. Y - Hydraulic rapid i.e. Head stock movement. Excellent condition Fully working condition

ID	MA36070
Make	Norton
Model
YOM	1979
Condition	Good Condition
Photo	See Photo \| See Video
30" x 144" NORTON PLAIN CYLINDRICAL GRINDER Swing Over Table, Maximum 30.5" Swing Over Table, Rated 30" Distance Between Centers, Nominal 144" Grinding Wheel Diameter, Standard 30" Grinding Wheel Width, Standard 3" Grinding Wheel Hole Diameter 12" Table Swivel Taper 1.375" TPF Table Longitudinal Feeds, Range 6 to 92 IPM Grinding Wheelhead Spindle Motor 30 HP Table Feed Motor, Horsepower 5 HP Electrical System 220-440/3/60 Floor Space Required, L x D 37'7" x 7'8" Weight, Approximately 32000 LBS Allen-Bradley Panel-View 550 PLC Controller Allen-Bradley AC Servo-Drive Infeed Motor

ID	MA36043
Make	Overbeck
Model	1000R
YOM	1981
Condition	Good Condition
Photo	See Photo
grinding diameter 150 mm grinding length 1000 mm centre height 140 mm total power requirement 9 kW weight of the machine ca. t dimensions of the machine ca. 4 x 3,2 m Control:konventionell

ID	MI8376
Make	Jones & Shipman
Model	1074
YOM
Condition	excellent working condition
Photo	See Photo
Center Height - 127 mm Max. Diameter of Job - 254 mm Max. Length of Job - 457 mm Grinding Wheel Diameter - 305 mm Table Rotation - 20 Degree to -20 Degree Least Count of the Machine - 0.5 Micron (0.0005 mm) - Equipped with Internal Grinding Attachment. - Equipped with DRO. - Features like Plunge Grinding, Auto-Cut, Auto-Compensation etc. - Auto-Cycle Operation possible.

ID	MI8375
Make	Kellenberger
Model
YOM
Condition	Good Condition
Photo	See Photo
Make - Kellenberger

ID	MI8327
Make	Stanko-Russia
Model	3A164A
YOM
Condition	Good Condition
Photo	See Photo
Workpiece diameter 40-400 mm Max. workpiece length 3000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 Max. grinding length 3000 mm Grinding wheel dia min/max 500-750 mm Motor power: 13 kW With DRO & Accessories

ID	MA35796
Make	Studer
Model	RHU400
YOM	1992
Condition	Good Condition
Photo	See Photo
Centre height: 125/175 mm Distance between centres: 400 mm Max. table travel: 440 mm, Max. swivel of top table: 12�

ID	MI8190
Make	Schaudt
Model
YOM
Condition	Good Condition
Photo	See Photo
Center distance - 1000mm Workpiece's diameter - 450mm Grinding wheel diameter - 500mm Weight - 5000kg

ID	MI8150
Make	Johansson (Sweden)
Model
YOM
Condition	excellent working condition
Photo	See Photo
Lenght : 4000MM ID & OD

ID	MI8117
Make	Tos Hostivar
Model	BHU32A/1000
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Center Height - 165 mm Max. Diameter of job - 320 mm Length - 1000 mm Wheel size - Diameter 500mm x 100 mm Width Work-Head speed - 18 rpm to 560 rpm Least count of wheel head slide - 1 micron Specification Equipped with Internal Grinding Attachment one of the latest series of machines made by TOS With Features like rapid Longitudinal travel Delay Feature Auto Slow etc Complete with wheel dresser coolant pump & Tank Machine is a Heavy-Duty type Universal Cylindrical Grinder Machine is in excellant working condition 500 kg crane attached in machine

ID	MA35552
Make	Schaudt,Germany
Model	RFH300
YOM	1963
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 350 mm Maximum grinding wheel diameter: 300 mm Max. diameter of workpiece: 160 mm Tip height: 100 mm Equipment: Tips Collets 2-3 disks with flanges

ID	MA35551
Make	Schaudt,Germany
Model	RFH300
YOM	1963
Condition	Good Condition
Photo	See Photo
Maximum grinding length: 350 mm Maximum grinding wheel diameter: 300 mm Max. diameter of workpiece: 160 mm Tip height: 100 mm Equipment: Tips Collets 2-3 disks with flanges

ID	MA35531
Make	Okuma,Japan
Model	GA34N
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: OKUMA OSP-5020G CNC CONTROL 406 MM ANGLE HEAD GRINDING WHEEL SLUDGE CONVEYOR SPECIFICATIONS: MAX. PART SWING 330 MM MAX. GRINDING DIAMETER 279 MM DISTANCE BETWEEN CENTERS 483 MM MAXIMUM WHEEL SIZE 405 MM X 75 MM GRINDING WHEEL HUB SIZE 127 MM WHEEL SPINDLE SPEED 25-600 RPM MAXIMUM PART WEIGHT 330 LBS X-AXIS TRAVEL 295 MM Z-AXIS TRAVEL 1194 MM WHEELHEAD MOTOR 7.38 HP WORKHEAD CENTER MT-#4 FOOTSTOCK CENTER MT-#4 APPROX. MACHINE FOOTPRINT 3277 MM X 2896 MM APPROXIMATE MACHINE WEIGHT 11,880 ELECTRICAL REQUIREMENTS 200/440V, 3PH, 60HZ EQUIPPED WITH: OKUMA OSP-5020G CNC CONTROL X & Z-AXIS PULSE CONTROL MISTBUSTER VARIABLE SPEED AIR CLEANER SLUDGE CONVEYOR

ID	MI8059
Make	Jones & Shipman
Model	1310
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Center Height - 102 MM (4") Max Diameter of Job-204 MM (8") Max Length of Job-458 MM (18") Grinding Wheel Size-305 MM (12") Diameter x 25.4 MM (1") Width Work Head Speeds - 30 rpm to 415 rpm Wheel Head spindle speeds -1750 rpm - 2300 rpm With Internal Grinding Attachment Automatic Depth Adjustment " Auto - Cut" Swivel type Wheel-Head Complete with Coolant tank pump,wheel-dresser etc.

ID	MA35358
Make	Studer
Model	S30-1
YOM	2009
Condition	Good Condition
Photo	See Photo
Distance between tips : 650 (mm) tips height : 125 (mm) Grinding wheel dimensions : 500 x 63 x 203 (mm) Grinding wheel diameter : 500 (mm) Cutting speed : 35 (m/sec) Maximum work piece weight : 130 (kg) Table orientation : 10 [�] Work piece headstock orientation : 90[�] Headstock rotation speed : 35-520 (rpm) Headstock orientation : 360 [�] Headstock power : 7.5 (kW) POWER SUPPY Power supply voltage : 380 (v) Installed power : 50 (Hz) WEIGHT Weight : 3000 (kg) EQUIPMENT Sensitron Tailstock with fine adjustment Fixed diamond support on headstock Work light Heindenhain ND 780 2-axis digital readout available, but not mounted Conventional and hydraulic control on 2n axes : Granitan S100 Lubrication tank with paper filtration

ID	MI7986
Make	WMW
Model	SU200x630
YOM
Condition	Good Condition
Photo	See Photo
Max. grinding diameter X length - 200 mm x 630 mm Grinding wheel size - Dia. 400 mm x 127 mm x 60 mm Spindle motor power - 3.5 kW Machine L x W x H - 2500 mm x 1600 mm x 1800 mm Machine weight - 350 kgs With - coolant system Only - OD grinding

ID	MA35299
Make	Overbeck
Model	IR400
YOM	1997
Condition	Good Condition
Photo	See Photo
NC DRO Max grinding length: 400 mm Max grinding diameter: 100 mm Max. wheel speed: 17500 rpm Spindle motor power :6 Kw

ID	MA35265
Make	Hol Monta
Model	UB50/3000
YOM	2014
Condition	Good Condition
Photo	See Photo
DISTANCE BETWEEN CENTERS: 3,000 MM / 118.1" MAX SWING DIAMETER: 500 MM / 19.68" GRINDING WHEEL DIAMETER: 500 MM / 19.68" SPINDLE POWER: 11 KW MINIMUM X AXIS INCREMENT: 0.001 MM MINIMUM Z AXIS INCREMENT: 0.005 (0.001) MM GRINDING WHEEL PERIPHERAL VELOCITY: 25 � 45 M/S MAX. WEIGHT BETWEEN CENTERS: 500 KG MAX. WORKPIECE WEIGHT INCL. FIXTURE � OVERHANGING 100 KG CNC CONTROL SYSTEM KAVALIR K 51-2 MACHINE EQUIPPED WITH CNC CONTROL SYSTEM KAVALIR K 51 COOLANT SPLASH GUARDS TAILSTOCK

100

ID	MI7928
Make	Erwin Junker
Model	BUAJ28/1000
YOM
Condition
Photo	See Photo \| See Video
Centre height 150 mm ,length 1000 mm ,with ID and OD attachment

101

ID	MI7927
Make	Johnshipmen
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
length :- 1 meter Id / od With 360mm od With side gards , with chuck , collent tank pump all available Ch is 180 mm With autocut

102

ID	MA35100
Make	Tos Hostivar
Model	BKU63-2800
YOM	1986
Condition	Good Condition
Photo	See Photo
Height of centres 280 mm Workpiece �, min. / max. 80 � 530 mm Distance between centers 2.800 mm Opposite chuck diameter 450 mm, Grinding wheel diameter approx 900 mm, Grinding wheel width approx 45 mm, Weight of machine is 14,5 ton.

103

ID	MI7894
Make	Tos Hostivar
Model
YOM
Condition	Good Condition
Photo	See Photo
Swing 630mm between center 4000mm with all accessories available

104

ID	MA34968
Make	STANKO
Model	3A172
YOM	1976
Condition	Good Condition
Photo	See Photo \| See Video
Workpiece:- 560 mm Distance between centers :- 4000 mm Weight of machine is 23,4 ton.

105

ID	MA34901
Make	TOS
Model	BUB40B NC/3000
YOM	2004
Condition	Good Condition
Photo	See Photo
Center Distance : 3000 MM Swing - 400 MM

106

ID	MA34880
Make	Tos Hostivar
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
1)Model: BUB40 Grinding diameter - 400mm Centers distance - 1500mm 2)Model: BUB 32 Grinding diameter - 320mm Centers distance - 1500mmQuantity:

107

ID	MA34823
Make	Tos Hostivar
Model	BUB40/1500
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter - 400 mm Centers distance - 1500 mm

108

ID	MA34822
Make	Tos Hostivar
Model	BUB 32/1500
YOM
Condition	Good Condition
Photo	See Photo
There are 2 such machines. Grinding diameter - 320mm Centers distance - 1500mm

109

ID	MA34801
Make	Tos Czech
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
1) Model:BUB40 Workpiece's diameter - 400mm Center distance - 1500mm Grinding diameter - 10.120mm 2)Model:BUB32 LENGTH: 1M CENTER HEIGHT: 160MM SWING: 320 MM

110

ID	MA34800
Make	Russian
Model	3A172
YOM	1962
Condition	Good Condition
Photo	See Photo
Workpiece �, 560 mm Distance between centers:4000 mm Weight of machine is :23,4 ton

111

ID	MI7785
Make	Churchill
Model
YOM	1987
Condition	Good Condition
Photo	See Photo
Swing Over Table:400 mm Maximum Grinding Diameter:400 mm Max. Grinding Length:1500 mm Grinding Wheel Size:40 mm Center Height:200 mm

112

ID	MA34717
Make	Tos Hostivar
Model	BUT63/3000
YOM	1969
Condition	Good Condition
Photo	See Photo
Height of centres 320 mm Workpiece �, min. / max. 80 � 630 mm Distance between centers 3.300 mm Weight of machine is 14,5 ton.

113

ID	MI7764
Make	Across
Model
YOM
Condition	Good Condition
Photo	See Photo
Running on foundation Length: 1500 mm, Center height: 175 mm

114

ID	MA34640
Make	Schaudt,Germany
Model	AR1000
YOM
Condition	Good Condition
Photo	See Photo
Center distance - 1000mm Workpiece's diameter - 450mm Grinding wheel diameter - 500mm Weight - 5000kg

115

ID	MA34607
Make	Churchill
Model
YOM
Condition	Good Condition
Photo	See Photo
Swing Over Bed 40� / 1016mm Distance Between Centres 144� / 3658mm Tailstock Rotating Work Head Linishing Attachment 2 off Work Holding Steadies Coolant Tank & Pump Modern Electrics and Pendant Control Swivel Table

116

ID	MA34601
Make	Cincinnati,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
SWING OVER TABLE, MAXIMUM .. 10.937" GRINDING DIAMETER, MAXIMUM .. 10" DISTANCE BETWEEN CENTERS, MAXIMUM . 96" GRINDING WHEEL DIAMETER, STANDARD . 30" GRINDING WHEEL WIDTH, MAXIMUM . 3" GRINDING WHEEL HOLE DIAMETER .. 20" TABLE SWIVEL TAPER TOWARD WHEELHEAD . 2.75" TPF TABLE SWIVEL TAPER AWAY WHEELHEAD . 1" TPF TABLE SWIVEL ANGLE TOWARD WHEELHEAD . 6-DEGREES TABLE SWIVEL ANGLE AWAY WHEELHEAD . 2-DEGREES WORKHEAD AND TAILSTOCK CENTER TAPERS . #12 B&S TABLE LONGITUDINAL FEEDS, INFINITE . 3 TO 220 IPM GRINDING WHEELHEAD SPINDLE MOTOR . 15 HP/1760 RPM FLOOR SPACE REQUIRED, L X D .. 290" X 84" WEIGHT, APPROXIMATELY .. 15100 LBS EQUIPPED WITH: WORKHEAD - LEVER TYPE TAILSTOCK FILMATIC SPINDLE BEARINGS SOME FOLLOW RESTS COOLANT SYSTEM (BUILT-IN)

117

ID	MA34560
Make	WMW
Model	SU315x2000
YOM
Condition	Good Condition
Photo	See Photo
Distance between centers: 2000 mm Grinding diameter: 315 mm Work piece rotating speed: 22 - 500 rpm Grinding spindle speed: 1340 / 1675 / 1910 rpm Grinding wheel: -Max diameter: 500 mm -Max width: 125 mm -Hole: 203 mm Dimensions: -Length: 590 cm -Width: 170 cm -Height: 180 cm -Weight: 6,6 tn

118

ID	MA34533
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Working Diameter: 350mm Working length: 2500 mm

119

ID	MA34510
Make	Stanko-Russia
Model	3U144
YOM	1992
Condition	Good Condition
Photo	See Photo
Grinding diameter - 400 mm Grinding length - 2000 mm

120

ID	MA34472
Make	Grisetti,Italian
Model	RU/AURS2050
YOM
Condition	Good Condition
Photo	See Photo
MAX. GRINDING LENGTH 2000 mm. CENTRES HEIGHT 190 mm. WHEEL DIMENSIONS � 500 mm. OVERALL DIMENSIONS 5300 x 2000 x 1900 mm. ACCESSORIES Marposs Coolant

121

ID	MA34452
Make	WMW-VEB
Model	SU315x2500
YOM
Condition	Good Condition
Photo	See Photo
Max. diameter: 315 mm, Max. Between centers: 2500 mm, Lift - Right:6200 mm, Front - back: 2100 mm Weight: 800 kg

122

ID	MI7707
Make	Fritz Studer
Model	RHU400
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Center Height - 125 mm Grinding Length - 400 mm Grinding Wheel - 400 mm x 50 mm x 127 mm Max. Longitudinal Travel - 440 mm Max. Load Capacity - 80 kgs Taper Spindle x Tail-stock - MT5 x MT3 Grinding Wheel Motor - 3 kW

123

ID	MI7703
Make	Churchill
Model
YOM
Condition	Good Condition
Photo	See Photo
CENTRE HEIGHT 175 MM GRINDING DIAMETER 350 MM CENTRE DISTANCE 2750 MM TOTAL POWER REQUIREMENT 12KW WEIGHT OF THE MACHINE CA. 7.5 TON DIMENSIONS OF THE MACHINE CA. 6300 x 2200 x 1600 MM

124

ID	MI7702
Make	TOS
Model	BUT33x3000
YOM
Condition	Good Condition
Photo	See Photo
WHEEL DIAMETER 125 x 710 MM CENTRE HEIGHT 625 MM CENTRE DISTANCE 3000 MM TOTAL POWER REQUIREMENT 20 KW WEIGHT OF THE MACHINE CA. 14 TON

125

ID	MI7701
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
WHEEL DIAMETER 600 MM WHEEL WIDTH 60MM CENTRE HEIGHT 200 MM CENTRE DISTANCE 2000 MM TOTAL POWER REQUIREMENT 15 KG WT WEIGHT OF THE MACHINE CA. 7500 KG DIMENSIONS OF THE MACHINE CA. 4000 X200 X2800 X1600

126

ID	MA34385
Make	Landis
Model
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: JOURNAL RESTS SWIVELING TRAVELING TABLE WHEEL DRESSER CAPACITY: MAX. WORK SWING : 641 MM MAX. DISTANCE BETWEEN CENTERS :4877 MM MAX. RECOMMENDED WEIGHT ON CENTERS : 4536 KG. STANDARD WHEEL SIZE : 762 MM X 76 MM X 305 MM WHEEL DRIVE MOTOR : 19 KW WORK CENTER DIAMETER : 64 MM WORK CENTER TAPER : NO. 20 JARNO WORK SPEEDS : 25-100 RPM TRAVERSE SPEEDS : 76 MM-5080 MM/MIN CARRIAGE TRAVERSE PER HANDWHEEL TURN : 1 MM-.9525 MM FLOOR SPACE REQUIRED : 2692 MM X 13411 MM APPROX. MACHINE WEIGHT : 22453 KG. EQUIPPED WITH: JOURNAL RESTS SWIVELING TRAVELING TABLE WHEEL DRESSER

127

ID	MA34362
Make	Hercules,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: Max. grinding diameter: 750mm Minimum grinding diameter: 10mm (0.4") Max. grinding length: 3200mm (128") Grinding wheel: 750mm x 80mm x 305mm Wheel head speeds variable 40 � 1500rpm Work head speed 6 � 45rpm Machine Equipped with: Various steadies Coolant and clarifier Balancing stand Note: Modernised to Siemens Sinumerik S7 in 1998 Reconditioning of grinding motor in 1998 Machine to be: Centres raised to swing 36" Chuck to be fitted to work head Machine delivered to Sheffield cleaned, run, checked and prepared for the above work. Electrical Supply: 3 phase, 50 cycles, 380 volt

128

ID	MA34354
Make	STANKO
Model	3M175
YOM	1987
Condition	Good Condition
Photo	See Photo
Max. work-piece dimensions: �-Diameter / length: 400/2800 mm Max. grinding dimensions: �-Diameter / length: 400/2520 mm Max. work-piece weight: 1000-15 mm Max. length of table travel: 2800 mm Height of centres above the table: 210 mm Accuracy class in accordance with GOST 8: P Spindle cone of headstock and tailstock in accordance with GOST 25557: Morse 6 End of grinding spindle in accordace with GOST 2323 (conicity 1:5): �-Nominal diameter: 100h11 mm �-Diameter of support necks: 110f7 mm Max. grinding wheel dimensions: �-Diameter external / internal: 750/305 mm �-Height: 80 mm Spindle rotation frequency of grinding headstock: 1270 min-1 Work-piece rotation frequency (stepless adjustment): �-Max.: 180 min-1 �-Min.: 20 min-1 Circular speed of grinding wheel: 50 m/sec Max. turn angle of upper table: - Clockwise / counterclockwise: 2 / 4 deg Total power of electric motors: 26,19 kW Power supply: 3-phase, 380 V, 50 Hz Overall dimensions with separately located equipment: �-Length: 8310 mm �-Width: 3690 mm �-Height: 2135 mm Net weight: 13850 kg

129

ID	MA34328
Make	Landis
Model
YOM
Condition	Good Condition
Photo	See Photo
EQUIPPED WITH: Plunge Feed TruForm Semi-Automatic Wheel Dresser Headstock & Tailstock W/Centers Spark-Out Timer Wheel Mount Centers 5-1/4" Wide Wheel Guard 7-1/2 HP Wheelhead Motor Handwheel Traverse Coolant System SPECIFICATIONS: Nominal Work Swing: 6" Nominal Distance Between Work Centers: 18" Max. Diameter Work Standard Machine Will Grind With Full Size Standard Wheel: 6 7/8" Floor Space Required: 106" x 50" Traverse Speed: 2" - 240"/Min. Grinding Wheel Size (Standard): 16" x 1" x 5" Grinding Wheel (Max. Width): 3" Headstock Work Center: #10 Jarno Footstock Work Center: #6 Jarno Approx. Weight (W/Hyd. Traverse & Hyd. Infeed): 4,150 lbs

130

ID	MA34312
Make	Berco
Model
YOM
Condition	Good Condition
Photo	See Photo
N� 1 CILINDER GRINDING BRAND BERCO TYPE RGTP 3000 HP. 250 mm Diametr work mm 500 Diameter Wheels mm 700 RED OUT N� 1 CILINDER GRINDING BRAND BERCO TYPE RGTP 2200 HP. 300 Diameter work mm 600 Diametr Wheels mm 700 Wheight kg. 7.000

131

ID	MI7633
Make	Tos Hostivar
Model	BUC63A
YOM	1981
Condition	Good Condition
Photo	See Photo
Grinding length - 3000 mm Grinding dia - 630 mm Centre height - 315 mm Work piece weight - 2500 kg Grinding wheel � 750 mm x 100 mm x 305 mm Grinding spindle speed - 840 / 970 U/min Work piece spindle speed - 8-315 U/min Table speed �stepless � 0.01 - 3,6 m/min Grinding head swiveling � 90 o , taper Morse 6� Grinding spindle drive - 15 kW voltage/frequency � 380 V / 50 Hz weight of the machine � 13,700 kgs dimensions of the machine - 10,000 mm x 3400 mm x 2000 mm total power requirement- 31 KVA

132

ID	MI7628
Make	Johnshipmen
Model
YOM
Condition	Good Condition
Photo	See Photo
1000 X 125 250mm Good running condition

133

ID	MI7627
Make	Matrix
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Center height - 130 Abc - 500 Running Good Condition

134

ID	MA34158
Make	STANKO
Model	3M175
YOM	1979
Condition	Good Condition
Photo	See Photo
Max. work-piece dimensions: �-Diameter / length: 400/2800 mm Max. work-piece weight: 1000-15 mm Max. length of table travel: 2800 mm Height of centres above the table: 210 mm Max. grinding wheel dimensions: �-Diameter external / internal: 750/305 mm �-Height: 80 mm Spindle rotation frequency of grinding headstock: 1270 min-1 Work-piece rotation frequency (stepless adjustment): �-Max.: 180 min-1 �-Min.: 20 min-1 Circular speed of grinding wheel: 50 m/sec Max. turn angle of upper table: - Clockwise / counterclockwise: 2 / 4 deg Total power of electric motors: 26,19 kW Power supply: 3-phase, 380 V, 50 Hz Overall dimensions with separately located equipment: �-Length: 8310 mm �-Width: 3690 mm �-Height: 2135 mm Net weight: 13850 kg

135

ID	MA34157
Make	TOS
Model	BUC63A
YOM
Condition	Good Condition
Photo	See Photo
Center distance - 4000 mm Grinding diameter - 630 mm Grinding wheel diameter - 750 mm Grinding wheel thickness - 100 mm

136

ID	MA34154
Make	Toyado
Model	GS 630-400
YOM	1983
Condition	Good Condition
Photo	See Photo
4000mm X 630MM

137

ID	MI7554
Make	Churchill
Model
YOM
Condition	Good Condition
Photo	See Photo
BETWEEN CENTERS: 1200MM SWING DIA : 300MM CENTER HEIGHT : 150MM

138

ID	MI7496
Make	Ribon
Model	RUR-1000
YOM
Condition	Good Condition
Photo	See Photo
Grinding Length: 1000 Mm Center Height: 150 Mm Swing: 300 MM

139

ID	MI7468
Make	England
Model
YOM	1990-92
Condition	Good Condition
Photo	See Photo
swing over bed 405mm, maximum distance between centres 1600mm, wheel speeds 1750mm, wheel size 400 x 40mm, work head speeds 23 � 260rpm, 1 axis DRO, live and dead centre on the work head, approximate dimensions 4000 x 1700 x 1700mm, approximate weight 5000k

140

ID	MA34025
Make	Tos Hostivar
Model	BUC63
YOM	1990
Condition	Good Condition
Photo	See Photo
630 x 4000 mm

141

ID	MA33865
Make	Schaudt,Germany
Model	A501N1000
YOM	1991
Condition	Good Condition
Photo	See Photo
350x1000mm

142

ID	MI7376
Make	WMW
Model	315/1000
YOM
Condition	Good Condition
Photo	See Photo
Between Center - 1000mm With Internal

143

ID	MI7375
Make	Overbeck
Model
YOM
Condition	Good Condition
Photo	See Photo
600 length 140 center

144

ID	MI7374
Make	Johnshipmen
Model
YOM
Condition	Good Condition
Photo	See Photo
250 x 500 mm

145

ID	MI7372
Make	Studer
Model	S40
YOM
Condition	Good Condition
Photo	See Photo
WHEEL DIAMETER 500 MM CENTRE HEIGHT 175 MM CENTRE DISTANCE 1000 MM TOTAL POWER REQUIREMENT 0,785 kW WEIGHT OF THE MACHINE CA. 4000 KG DIMENSIONS OF THE MACHINE CA.

146

ID	MI7370
Make	Norton
Model
YOM
Condition	Good Condition
Photo	See Photo
ABC : 600mm CH : 140mm Swing : 280mm With Internal grinder attachment

147

ID	MI7369
Make	Cincinnati,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
ABC : 600mm CH : 140mm Swing : 280mm With Internal grinder attachment

148

ID	MA33777
Make	Studer
Model	S40-2
YOM
Condition	Good Condition
Photo	See Photo
Center height - 175 mm Center distance - 1600 mm Grinding diameter - 350 mm Dimensions - 4000x2000x2000 mm Weight - 5500 kg

149

ID	MI7343
Make	Gendron
Model
YOM
Condition	Good Condition
Photo	See Photo
With tespa in process grinding gauge between center 1000mm 6" center height

150

ID	MA33502
Make	STANKO
Model	3A164A
YOM
Condition	Good Condition
Photo	See Photo
Max. workpiece diameter- 400 mm Max. workpiece length- 2800 mm Max. grinding length- 2500 mm

151

ID	MA33400
Make	Tos Hostivar
Model	BH25/630
YOM
Condition	Good Condition
Photo	See Photo
Swing diameter 250 mm 630 mm distance between centers Workpiece weight 300 kg Grinding wheel 600x80x305 mm The biggest width of grinding wheel 150 mm Swing open the armrest 110 mm Morse 5 Grinding spindle rotation � 45 degrees Grinding spindle speed 1430.1650 rpm Speed drive spindle: I range from 18 to 112 / min II range 90-560 / min The smallest longitudinal movement of table 1 mm Table speed infinitely controllable 0.05-5 m / min Lateral movement of the grinding spindle 415 mm Fast Delivery 60 mm hydraulic Electric grinding spindle 19 kW Dimensions 4080x2370 mm Machine weight 4700 kg

152

ID	MA33367
Make	WMW Erfurt,Germany
Model	BWF SI6 A-S x 710
YOM	1977
Condition	Good Condition
Photo	See Photo
Minimum / maximum internal diameters ground: Up to 500 mm Maximum external diameter ground: 400 mm Maximum depth ground: 500 mm Maximum length of work piece 1500 mm Maximum length of work piece with in cycle face grinding 275 mm Maximum swivel of work head: � 30 deg Maximum swing inside splash-guard: 500 mm

153

ID	MA33275
Make	TOS
Model	BUB40/1500
YOM
Condition	Good Condition
Photo	See Photo
Workpiece's diameter - 400mm Center distance - 1500mm Grinding diameter - 10.120mm

154

ID	MA33202
Make	TOS
Model	BUC 63-3000
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter - 630mm Grinding length - 3000mm Workpiece's weight - 2500kg Machine's weight - 13000kg

155

ID	MI7201
Make	AMBA
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Cylindrical 450 mm

156

ID	MA32967
Make	Tos Hostivar
Model	BUC63A/4000
YOM
Condition	Good Condition
Photo	See Photo
Swing dia. : 630 mm Working length : 4000 mm Grinding Wheel : D750 x 100 x 305 mm Machine weight : 17.4 tons

157

ID	MA32893
Make	Tos Czech
Model	BUA31/1500
YOM	1965
Condition	Good Condition
Photo	See Photo
Grinding diameter - 315 mm Grinding length - 1500 mm Clamping chuck diameter - 190 mm Dimensions - 4500 x 2100 x 1600 mm Weight - 4800 kg

158

ID	MA32892
Make	Kellenberger
Model	U1500
YOM
Condition	Good Condition
Photo	See Photo
Center height - 175 mm Center distance - 1500 mm Grinding wheel diameter - 400 mm Grinding wheel width - 50 mm Dimensions - 3000 x 1700 x 1400 mm Weight - 2500 kg

159

ID	MA32886
Make	Russian
Model	3M194
YOM	1978
Condition	Good Condition
Photo	See Photo \| See Video
Max. work piece diameter, mm 560 Min. work piece diameter, mm 40 Max. work piece length, mm 4000 Max. grinding length, mm 3800 Max. work piece weight, kg 3000 Size of grinding wheel, mm: - outer diameter 400.750 - width 100 - inside diameter 305 Speed of work, rpm 12.120 Speed grinding wheel, rpm 600.1200 Traverse speed of table, m/min 22.50 Max. table stroke, mm 4240 Min. table stroke, mm 110 Table inclination, degrees: - clockwise 0,3 - counterclockwise 6 Headstock rotation speed, rpm 8.80 Grinding head movement, m/min 0,46 Table movement speed, m/min 0,05.3,7 Total power required, kW 42 Machine dimensions, mm 14065 x 3615 x 2450 Machine weight, kg 34300

160

ID	MI7154
Make	Tos Czech
Model	BUT 63/3000
YOM
Condition	excellent working condition
Photo	See Photo
Max. Job Diameter - 630 mm Max. Job Length - 3000 mm Grinding Wheel Size - 750 mm Diameter x 150 mm Width x 305 mm Bore Max. Weight between Centres - 2,500 kg. Table Speeds - 0.05 m/min to 5.0 m/min Work-head Speeds - 9 rpm to 156 rpm Total Weight of Machine - 16 tons (Approximately) - With 2 nos. x Steadies, wheel dresser etc. - With lots of accessories like centres, coolant tank, coolant pump, wheel balancing stand etc.

161

ID	MI7153
Make	Ferrari (Italy)
Model
YOM
Condition	excellent working condition
Photo	See Photo
Center Height - 180 mm Max. Length of Job - 1000 mm Max. Diameter of Job - 360 mm Grinding Wheel Size - 450 mm Diameter x 75 mm Width Work-head Speeds - 23 rpm to 265 rpm - Complete with 3 x 2-point steady, wheel balancing stand etc. - Complete with Straight and Angular Wheel Dressers. - Complete with chuck, coolant pump & tank etc. - With lots of different types of centres and other accessories etc. - Hydraulic Rapid Forward/Backward Movement of Wheel-Head. - Equipped with Hydraulic Tailstock

162

ID	MA32700
Make	Tos Czech
Model	BUB40/1500
YOM	1985
Condition	Good Condition
Photo	See Photo
Work piece's diameter - 400 mm Center distance - 1500 mm Grinding diameter - 10.120 mm

163

ID	MA32676
Make
Model	3M175
YOM	1987
Condition	Good Condition
Photo	See Photo
Workpiece's diameter - 400mm Workpiece's length - 2800mm Weight of the machine - 13800kg

164

ID	MA32414
Make	Kellenberger
Model	RS175x1500
YOM
Condition	Good Condition
Photo	See Photo
Grinding area : 175x1500mm Grinding width : 250mm Grinding wheel diameter : 450mm Center height : 125mm

165

ID	MA32411
Make	Tos Hostivar
Model	BUT63/3000
YOM	1968
Condition	Good Condition
Photo	See Photo
Height of centres 320 mm Workpiece �, min. / max. 80 � 630 mm Max. Distance between centers 3.300 mm Grinding length / Table travel : 3,300 mm Weight of workpiece, max. approx : 2,000 kg Grinding wheel dia. x width 750 x 150 mm Cross travel of grinding slide 420 mm,Infeed amount of grinding slide 0.01 � 0.06 mm/table stroke Motorized Quick Feed of cross travel/hydraulic lift-off 200/80 mm/Min. 12 Workpiece speeds adjustable in 3 steps 9 � 156 rpm Grinding wheel speed approximately 815 rpmTable speeds, infinitely variable / quick feed 0,05 � 5,000 mm/min Taper grinding / taper angle / table swivel 3 � 6 � min Grinding spindle drive / workhead drive 10 / 3 kW Total electrical load 25 kW � 380 V � 50 Hz Weight, approx. 14,5 to Dimensions: length x width x height, approx. 10 x 3,10 x 2,20 m

166

ID	MA32081
Make	Waldrich Siegen
Model	WSF6
YOM	1978
Condition	Good Condition
Photo	See Photo
Max. distance between center: 4200 mm, Max. diameter work: 750 mm, Power alimentation: 380 V-50 Hz, Diameter wheels grinder: 750 x 65 mm, Max. weight capacity: 6000 Kg, Power capacity motors wheel: 22 Kw, Power capacity motors head: 6 Kw,

167

ID	MA32027
Make	Studer
Model	S30
YOM
Condition	Good Condition
Photo	See Photo
Centers height - 175 mm Distance between centers - 1000 mm Grinding wheel diameter � 400mm Grinding wheel dimensions: 400x80x127 mm Machine�s weight: 3400 kg

168

ID	MA31690
Make	Overbeck
Model	400RU
YOM	1978
Condition	Good Condition
Photo	See Photo
Centers height: 100 mm, Between centers: 430 mm, Maxi weight of the part: 12 kg, Grinding wheel diameter: 300 mm, Grinding wheel width: 60 mm, Grinding wheel bore: 127 mm, Wheelhead spindle speed: 2250/2750 rpm, Tailstock type: MK2 Speed of table traverse:0-6 m/min, Power: 4.5 kW, Sizes: 2.5 x 2.9 mm, Weight: 1700 kg

169

ID	MA31666
Make	Tos Hostivar
Model	BHU32A/1500
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: 320 mm, Grinding length: 1500 mm

170

ID	MA31610
Make	Russian
Model	3M197
YOM	1986
Condition	Good Condition
Photo	See Photo
Main technical data: Max work-piece Diameter:800 mm, Length:6000 mm, Weight: 10 ton, Grinding wheel dimensions: 750 x 100 mm, Min grinding diameter: 80 mm, Intermittent in feed per radius: 0.0025-0.03 mm, Surface speed of grinding wheel: 50 m/s, Main motor: 30 kW, Total power requirement: 47,5 kW, Dimension: length: 17460 mm, Width: 4180 mm, height: 2450 mm, machine weight: 43.200 kg

171

ID	MA31600
Make	Kellenberger
Model	RS175x1500
YOM
Condition	Good Condition
Photo	See Photo
Grinding area - 175 x 1500 mm Grinding width - 250 mm Grinding wheel diameter - 450 mm Center height - 125 mm Quantity: 2 nos

172

ID	MA31384
Make
Model	3M193
YOM	1984
Condition	Good Condition
Photo	See Photo
max length - 2800 mm max diameter - 560 mm weight of work piece - 4000 kg

173

ID	MA31153
Make
Model	SWAAGL125
YOM	1984
Condition	Good Condition
Photo	See Photo
Grinding diameter in automatic cycle - .185mm Grinding diameter in manual cycle - .160mm Rapid travel of spindle stock - 10mm Max travel of spindle stock with the help of handwheel - 125mm Wheel's dimensions - 630x50x350mm Weight - 4600kg

174

ID	MI6938
Make	Zocca,Italy
Model	RU 600/3 IDRO MATIC
YOM
Condition	Working
Photo	See Photo
Machine is equipped with MARPOSS Centre Height : 180 mm Length of Job : 600 mm Wheel size- 50 X 400 MM Type : Hydraulic Complete of all accessories. This machine is in perfect working condition, as new machine, rarely used.

175

ID	MA30372
Make	Kellenberger
Model	600RJ
YOM	1980
Condition	Good Condition
Photo	See Photo
Working Range External Grinding grinding diameter (max):250 mm grinding length: 600 mm Work piece Spindle stock spindle revolutions (max):2850/min Spindle stock Grinding Spindle spindle revolutions (max):750/min Grinding Tool type of grinding tool wheel

176

ID	MA30085
Make	Studer
Model	S30
YOM
Condition	Good Condition
Photo	See Photo
Centers height: 175 mm, Distance between centers: 1000 mm, Grinding wheel diameter: 400 mm, Grinding wheel dimensions: 400 x 80 x 127 mm, Machine's weight: 3400 kg.

177

ID	MA30059
Make	Stanko-Russia
Model
YOM	80s
Condition	Good Condition
Photo	See Photo
Model: 3M195 Max. work piece diameter: 800 mm Max. work piece length: 2800 mm Main motor: 48 kW Dimension: 10790(L)x 4180 (W) x 2455 (H) mm Weight of the machine with electric equipment: 35.5 t Good condition Model: 3M193 New: 80�s Max. work piece diameter: 560 mm Max. work piece length: 2800 mm Main motor: 43 kW Dimension: 10540(L)x 4020 (W) x 2455 (H) mm Weight of the machine with electric equipment: 28.27 t Quantity: 2 nos

178

ID	MA29933
Make	Russian
Model	3M193
YOM
Condition	Good Condition
Photo	See Photo
Greatest diameter : 560 mm, The greatest length of an installed piece : 2800 mm.

179

ID	MI6589
Make	Studer
Model	S30
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Distance between centres: 650 or 1000 mm, Centre height: 125 / 175 / 225 mm, Swivelling turret wheel head (for external and internal grinding) Automatic grinding cycles for plunge and traverse grinding Swivelling machine table Partial enclosure Granitan machine bed Large range of accessories

180

ID	MA29607
Make	Jones & Shipman
Model	1055
YOM	1972
Condition	working condition ,under power
Photo	See Photo
Work piece's length: 1520 mm, Work piece's diameter: 203 mm, Dimensions: 1700 x 4300 mm, Weight: 5100 kg, The machine is equipped with Additional face plate 5 rests, extra hydraulic station, documentation

181

ID	MA29600
Make	WMW,Germany
Model	SWA AGL125
YOM
Condition	Good Condition
Photo	See Photo
Grinding diameter: 28. 125 mm (automatically), Grinding diameter: 160 mm (manually), Wheel's dimensions: 630 x 305 mm, Dimensions: 3220 x 2920 x 1970 mm, Weight: 4500 kg.

182

ID	MI6540
Make	Tos Czech
Model	BUA50-1000
YOM
Condition	Good Condition
Photo	See Photo
Maximum grinding diameter : 500 mm, Admit between centers : 1000 mm. Wheel dia : 750 mm.

183

ID	MI6533
Make	Cimat
Model	RU400
YOM
Condition	Good Condition
Photo	See Photo
Admit between centers : 400 mm, Center Height : 100 mm.

184

ID	MI6516
Make	Churchill
Model	CW3000
YOM
Condition	Good Condition
Photo	See Photo
Between center : 3000 mm Swing : 400 mm.

185

ID	MI6515
Make	Johansson (Sweden)
Model	21UA
YOM	1974
Condition	working condition ,under power
Photo	See Photo
Length: 3000 mm, Centre height: 225 mm

186

ID	MI6514
Make	MSO,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Dia : 570 mm, Length : 2500 mm.

187

ID	MI6513
Make	Haubold Chemnitz; German
Model
YOM
Condition	Good Condition
Photo	See Photo
Admit Between Centre : 3500 mm, Centre Height : 180 mm, Swing : 360 mm, Extended Block Available Centre Height : 400 mm.

188

ID	MI6511
Make	Churchill,UK
Model
YOM
Condition	Good Condition
Photo	See Photo
Swing Cylindrical Grinder : 3000 mm long X 500 mm, Machine is highly accurate still and is used for precision grinding of hydraulic cylinder rods. Machine is fully complete with all accessories including steady rests etc.

189

ID	MI6510
Make	Friedrich Schmaltz,German
Model
YOM	1962
Condition	Good Condition
Photo	See Photo
Maximum grinding surface : 3000 X 650 mm, Travels X, Y : 3000 (X), 650 (Y) mm, Hydraulic operation, Servo handbook and electrical diagrams included, Dimensions : 7400 mm x 2800 mm x 1700 mm + tank 1200 mm x 850 mm x 1100 mm, Approximate weight : 18.000 kg. Motors : 220V (transformer 380V). Complete with accessories box (grinding wheels).

190

ID	MI6506
Make	Tos Czech
Model
YOM
Condition	Good Condition
Photo	See Photo
a

191

ID	MA29544
Make	Russian
Model	3M195
YOM	1992
Condition	Good Condition
Photo	See Photo
Grinding diameter: 800 mm, Grinding length: 4000 mm, Work pieces weight: 10000 kg, Total power: 60 kW, Grinding wheel: 750 x 100 mm, Weight: 33900 kg.

192

ID	MA29320
Make	Okuma,Japan
Model	H45A
YOM	1981
Condition	Good Condition
Photo	See Photo \| See Video
Working Capacity : 700 mm X 1800 mm.

193

ID	MA29156
Make	Studer
Model	S50-12
YOM	1987
Condition	Good Condition
Photo	See Photo
Center height : 160 mm, Center distance : 1600 mm, Grinding length : 1600 mm, Grinding wheel�s diameter : 500 mm.

VKengg.co.in

Category : Grinding Machines

Sub-Category : Grinder Cylindrical