VKengg.co.in

Category : Grinding Machines

Sub-Category : Grinder Cylindrical Universal

Total Machines Found : 25

Select | Machine Details
 
  1
IDMA38846
MakeCincinnati Milacron,Austria
Model
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Internal Grinding Spindle Attachment (Swing Down Type)
Hydraulic Longitudinal Table Feed
Filmatic Bearings - Manual Infeed - Steady Rest
Grinding Wheel Dresser
Coolant System (Built-In)
CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 12.9375"
Grinding Diameter, Maximum 12.9375"
Distance Between Centers, Nominal 48"
Grinding Wheel Diameter, Standard 14"
Grinding Wheel Width, Standard 1.5"
Grinding Wheel Hole Diameter 5"
Table Swivel Taper Toward Wheelhead 4.5" TPF
Table Swivel Taper Away Wheelhead 1.25" TPF
Table Swivel Angle Toward Wheelhead 9-DEGREES
Table Swivel Angle Away Wheelhead 2-DEGREES
Headstock Swivel Angle Toward Wheelhead 90-DEGREES
DEGREESHeadstock Swivel Angle Away Wheelhead 30-DEGREES
Lower Grinding Wheelhead Swivel Range 90-DEGREES
Upper Grinding Wheelhead Swivel Range 30-DEGREES
Workhead and Tailstock Center Tapers #9 B&S
Workhead Spindle Speeds, Infinite Range 50 to 500 RPM
Table Longitudinal Feeds, Infinite 3 to 220 IPM
Automatic In-Feed at Table Reversal .0002 to .0125 IPR
Grinding Wheelhead Spindle Motor 3 HP
Hydraulic Motor, Horsepower/RPM 1 HP
Internal Grinding Spindle Motor, Horsepower 1 HP
Floor Space Required, L x W 185" x 73"
Weight, Approximately 10000 LBS
 
  2
IDMA38837
MakeLandis
Model
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Table Mounted Radius Grinding Wheel Dresser
Coolant System (Built-In)
CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 16.75"
Grinding Diameter, Maximum 16"
Distance Between Centers, Nominal 72"
Weight Capacity Between Centers, Maximum 10000 LBS
Grinding Wheel Diameter, Standard 30"
Grinding Wheel Width, Standard 3"
Grinding Wheel Hole Diameter 12"
Table Swivel Graduated 13-DEGREES
Workhead and Tailstock Center Tapers #20 JARNO
Workhead Spindle Speeds, Range 25 to 100 RPM
Table Longitudinal Feeds, Infinite 3 to 200 IPM
Floor Space Required, L x D 24' x 8'10"
Weight, Approximately 34000 LBS
 
  3
IDMA38836
MakeLandis
Model
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
DC Variable-Speed Headstock
Lever/Handwheel Adjustable Tailstock
Trabon Lubrication System
Tailstock-Mounted Grinding Wheel Dresser
(2) Follow Rests
Federal Gauging
CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 14-3/4"
Grinding Diameter, w/30" Wheel 14"
Distance Between Centers, Maximum 120"
Table Swivel, Included Angle 3-DEGREES
Table Swivel, Taper Per Foot 5/8"
Grinding Wheel, Standard Diameter 30"
Grinding Wheel, Width 3"
Grinding Wheel, Hole Diameter 12"
Grinding Wheel Speeds 810 & 1060 RPM
Longitudinal Table Feeds, Infinite 3 to 130 IPM
Workhead & Tailstock Center Tapers 14 JARNO
Grinding Wheelhead Spindle Motor 15 HP/1755 RPM
Workhead Motor, Horsepower 1 HP DC
Electrical System 220-440/3/60
Floor Space Required, L x D 27'8" x 6'11"
Weight, Approximately 19200 LBS
 
  4
IDMA38834
MakeTos Hostivar
ModelBUB 50/3000
YOM
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
Sony 2-Axis Digital Readouts
Hydraulic Longitudinal Table Feed
Steady Rest - (2) Follow Rests
Table-Mounted Grinding Wheel Dresser
Coolant System
CATALOG SPECIFICATIONS:
Swing Over Table, Maximum 20"
Grinding Diameter, Maximum 20"
Distance Between Centers, Nominal 120"
Weight Capacity Between Centers 771 LBS
Grinding Wheel Diameter, Standard 20"
Grinding Wheel Width, Standard 3"
Grinding Wheel Width, Maximum 5"
Grinding Wheel Hole Diameter 8"
Table Longitudinal Travel, Maximum 126"
Table Longitudinal Speed, Infinitely Variable .0019 to .196 IPMTable Rapid Traverse
Table Swivel Range -2/+ 4-DEGREES
Headstock Swivel Range 90-DEGREES
Grinding Wheelhead Swivel Range -15/+ 45-DEGREES
Grinding Wheelhead Speeds 1720 & 1980 RPM
Workhead Spindle Speeds, Infinite Range 18 to 560 RPM
Wokhead & Tailstock Spindle Taper 5 MT
Grinding Wheelhead Spindle Motor 13 HP
Floor Space Required, L x D 390" x 118"
Weight, Approximately 16750 LBS
 
  5
IDMI10844
MakeStuder
ModelRHU750
YOM
ConditionGood Condition
PhotoSee Photo
CH 175MM SWING 350 MM ID /OD
COOLANT UNIT , GUIDE REST , DRESSER .
 
  6
IDMI10454
MakeTOS
ModelBHU50A x 2000
YOM
ConditionGood Condition
PhotoSee Photo
Center Height 250mm
Swing 500mm
Between Center 2000mm
 
  7
IDMI9708
MakeStuder
ModelRHU500
YOM
ConditionGood Condition
PhotoSee Photo
UNIVERSAL TYPE ID /OD WITH COOLANT UNIT AND ACCESSORIES
ABC 500 mm CENTER HEIGHT 100 MM
 
  8
IDMI9612
MakeTOS - Hostivar (Czech Republic)
ModelBHU 40A / 1500
YOM
ConditionGood Condition
PhotoSee Photo
Center Height - 205 mm
Max. Diameter of Job - 400 mm
Max. Length of Job - 1500 mm
Grinding Wheel Size - Diameter 500 mm x 100 mm Width
Least Count - 1 Micron (0.001 mm)
Work-Head Speed - 18 rpm to 560 rpm (Continuously Variable)
Equipped with Internal Grinding Attachment.
Features like Auto-Cycle, Delay, Auto-Slow, Plunge Grinding, Rapid Travel of Table etc.
Features like Auto-Cut, Auto-Compensation, Super Finishing (Spark-Out) etc.
 
  9
IDMI9561
MakeTOS
ModelBHU 32
YOM
ConditionGood Condition
PhotoSee Photo
WHEEL DIAMETER 320mm
CENTRE HEIGHT 160 MM
CENTRE DISTANCE 800 MM
TOTAL POWER REQUIREMENT 8 KW
WEIGHT OF THE MACHINE CA. 4 TON
DIMENSIONS OF THE MACHINE CA. L: 2900MM x W:2100MM x H:1450MM
 
  10
IDMI8525
MakeNorton
Model600mm
YOM
ConditionGood Condition
PhotoSee Photo
Admit between centre : 600mm
Centre height : 140mm
Swing : 260mm
Grinding wheel dia : 300mm
Grinding wheel width : 40mm
Universal machine with ID /OD
 
  11
IDMI8524
MakeJones & Shipman
Model1314
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity 8``*24 ``( 203mm * 610mm )
Swing 8`` ( 203mm )
Between centres 24`` ( 610mm )
Table swivels 7-0-7 degrees
Table traverse speed 3``-144 ``( 76 - 3658mm )
Work head input 380/420/3/0 ac 0.33 hp
Work head speeds 30- 415 rpm
Work head swivels 10-0-90 degrees
Wheel head input 380 /420/3/50 ac 1 hp
Nominal stone size 8`` ( 203mm ) diameter * 3/4 `` ( 19mm ) face
internal grinding attachment yes
Wheel head infeed rate 0.0002`` -0.0012`` ( 0.01-0.03mm )
Fitted with wheel dresser
Lenght 7' ( 2.13m )
Width 5' ( 1.52m ) Height 5'10`` ( 1.78m )
Nett weight approx. 2 tons ( 2032 kgs )
 
  12
IDMI8522
MakeSTANKO
Model3Y10A
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Centre height : 80mm
Swing : 160mm
Between centre : 250mm
 
  13
IDMI8521
MakeJones & Shipman
Model1314
YOM
ConditionGood Condition
PhotoSee Photo
Capacity 8``* 24 `` ( 203mm * 610mm )
Swing 8`` ( 203mm )
Between centres 24 `` ( 610mm )
Table swivels 7-0-7 degrees
Table traverse speed 3`` - 144`` ( 76- 3658mm )
Work head input 380/420/3/50 ac 0.33hp
Work head speed 30-415 rpm
Work head swivels 10-0-90 degrees
Wheel head input 380/420/3/50 ac 1 hp
Nominal stone size 8`` ( 203mm) diameter * 3/4`` ( 19mm ) face
Internal grinding attachment yes
Wheel head infeed rate 0.0002`` - 0.0012`` ( 0.01-0.03mm)
Fitted with wheel dresser
Length 7' ( 0.13m )
Width 5' ( 1.52m )
Height 5' /10`` ( 1.78m )
Nett weight approx . 2 tons ( 2032 kgs )
 
  14
IDMA36078
MakeBrown & Sharpe
Model1020U
YOM
ConditionGood Condition
PhotoSee Photo
10" x 20" BROWN & SHARPE UNIVERSAL CYLINDRICAL GRINDER
Swing Over Table, Maximum 10"
Grinding Diameter, Maximum 10"
Distance Between Centers, Nominal 20"
Distance Between Centers, Maximum 22"
Grinding Wheel Diameter, Standard 12"
Grinding Wheel Width, Range .375" to 1"
Grinding Wheel Hole Diameter 5"
Swivel Table, Scales For Angular Set 8-1/4 DEGREES
Swivel Table, Taper Per Foot 3.5"
(3) Grinding Wheel Speeds, Range 2100 to 2800 RPM
Workhead Spindle Speeds, Infinite Range 60 to 600 RPM
Table Longitudinal Feeds, Infinite 3 to 150 IPM
Wheelhead In-Feeds, Range .0001 to .003 IPR
Grinding Wheelhead Spindle Motor 2 HP/1730 RPM
Workhead Motor, Horsepower 1/4 HP
Hydraulic Motor, Horsepower 3/4 HP
Electrical System 220-440/3/60
Floor Space Required, L x D 8'8" x 6'5"
Overall Height 5'3"
Weight, Approximately 5100 LBS
EQUIPPED WITH:
Internal Attachment
Magnetic Chuck Mounted On Workhead
4-Jaw Chuck - 3-Jaw Chuck
Table Mounted Wheel Dresser
Spark-Out Timer
Coolant Pump
 
  15
IDMA36076
MakeDANOBAT
ModelM51
YOM1991
ConditionGood Condition
PhotoSee Photo
10" x 20" DANOBAT HIGH PRECISION UNIVERSAL CYLINDRICAL GRINDER
Swing Over Table, Maximum 10.2"
Grinding Diameter w/15" Wheel, Maximum 7.87"
Distance Between Centers, Nominal 20"
Grinding Wheel Diameter, Minimum 11.8"
Grinding Wheel Diameter, Standard 15"
Grinding Wheel Width, Maximum 1.5"
Grinding Wheel Width, Standard 2"
Grinding Wheel Hole Diameter 5"
Grinding Wheel Speed, 13.7" Wheel 1745 RPM
Grinding Wheel Speed, 15.7" Wheel 1530 RPM
Peripherical Speed 32 M/S 1312 F/S
Table Swivel Angle 8-DEGREES
Headstock Swivel Range 360-DEGREES
Grinding Wheelhead Swivel Range 30-DEGREES
Workhead Center Taper #4 MT
Tailstock Center Taper #3 MT
Workhead Spindle Speeds, Range 75 to 750 RPM
Table Longitudinal Feeds, Infinite .3 to 19.7 FPM
Grinding Wheelhead Spindle Motor 5.5 KW
EQUIPPED WITH:-
Live/Dead Center Workhead
Universal Swivelling Headstock
Hydraulic Longitudinal Table Feed
Hydraulic In-Feed
Automatic Lube System
 
  16
IDMA36075
MakeCincinnati Milacron,Austria
ModelR77
YOM1976
ConditionGood Condition
PhotoSee Photo
10" x 31" CINCINNATI-MILACRON CENTERTYPE PRODUCTION UNIVERSAL CYLINDRICAL GRINDER
Swing Over Table, Maximum 10"
Distance Between Centers, Maximum 31"
Weight Capacity Between Centers 165 LBS
Grinding Wheel Diameter, Standard 16"
Grinding Wheel Width, Standard 2"
Grinding Wheel Hole Diameter 5"
Table Swivel Angle Maximum, (+/-) 10-DEGREES
Wheelhead Swivel Range (+/-) 45-DEGREES
Headstock Swivel Range 0 to 90-DEGREES
Wheelhead Rapid Advance Stroke 2"
Footstock Quill Retraction 1"
Workhead and Tailstock Center Tapers #8 JARNO
Headstock Speeds Range, Infinite 60 to 480 RPM
Table Longitudinal Feeds, Range 2 to 240 IPM
Auto-Pick In-Feed Diameter Reduction .0002 to .0016 IPR
Grinding Wheelhead Spindle Motor 4 HP
Workhead Motor 1 HP
Hydraulic Motor, Horsepower 1 HP
Weight, Approximately 5300 LBS
Infinitely Variable Hydraulic Longitudinal Table Feed
Left & Right Wheel Mounting
Swiveling Headstock w/Live & Dead Spindle
Infinitely Variable Headstock Speed Range
Coolant System (Tank & Pump)
 
  17
IDMA36072
MakeShigiya
ModelGUA30-100
YOM
ConditionGood Condition
PhotoSee Photo
12.6" x 40" SHIGIYA AUTOMATIC INFEED HYDRAULIC
UNIVERSAL CYLINDRICAL GRINDER w/INTERNAL
Swing Over Table, Maximum 12.6"
Grinding Diameter, Maximum 11"
Distance Between Centers, Nominal 40"
Max. Workpiece Weight 287 LBS
Grinding Wheel Diameter, Standard 14"
Grinding Wheel Width, Standard 1" to 2"
Grinding Wheel Hole Diameter 5"
Work Table Stroke 46"
Wheelhead Stroke, Maximum 8.66"
Tailstock Spindle Stroke 1.18"
Tailstock Spindle Taper #4MT
Table Swivel Range 10-DEGREES
Workhead Swivel 120 DEGREES
Longitudinal Table Feed, Range .16 to 10 FPM
Workhead Spindle Speeds, Range 20 to 380 RPM
Grinding Wheelhead Spindle Motor 5 HP
Workhead Spindle Motor 0.4 HP
Electrical Requirements 230/460/3/60
Weight, Approximately 6850 LBS
 
  18
IDMA36071
MakeCincinnati,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
12" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
Swing over table, maximum 12.9375"
Grinding diameter w/14" wheel 12.9375"
Distance between centers, nominal 48"
Grinding wheel diameter, standard 14"
Grinding wheel width, standard 1.5"
Grinding wheel hole diameter 5"
Table swivel taper toward wheelhead 3.5" TPF
Table swivel taper away wheelhead 1" TPF
Table swivel angle toward wheelhead 8.5-DEGREES
Table swivel angle away wheelhead 3-DEGREES
Lower grinding wheelhead swivel range 90-DEGREES
Upper grinding wheelhead swivel range 30-DEGREES
Workhead and tailstock center tapers #9 B&S
Workhead spindle speeds, range 50 TO 500 RPM
Table longitudinal feeds, infinite 3 TO 240 IPM
Grinding wheelhead spindle motor 2 HP
Overall dimensions, l x w 15'4" X 5'2"
Weight, approximately 6700 LBS
INTERNAL GRINDING SPINDLE ATTACHMENT (SWING-DOWN TYPE)
VARIABLE SPEED HEADSTOCK
12" FACEPLATE W/10" MAGNETIC CHUCK
BUILT-IN COOLANT SYSTEM
 
  19
IDMA36042
MakeKellenberger
ModelUR 125x600
YOM1981
ConditionGood Condition
PhotoSee Photo
grinding diameter 248 mm
grinding length 600 mm
centre height 125 mm
Dimensions (L/W/H) 2,15 x 1,7 x 1,5 m
Control:konventionell
 
  20
IDMA35999
MakeNewall,British
ModelKUHD 37
YOM
ConditionUsed
PhotoSee Photo
38” x 120”
Centre Height 19.5”
Swing over bed 38”
Max Dia. Ground 37”
Max distance between centres 120”
Swivel Workhead
Workhead speeds 5-100rpm
4 jaw chuck fitted to work head 28” dia.
Double swivel wheel head
New wheel size 600mm x 50mm
Swivel Table
Table speeds variable
Equipped with:
Internal Grinding att. and various spindles
2 x 2 point open steadies
2 x 3 point closed steadies 20” and 24” capacity
Table mounted wheel dresser
Coolant tank and pump
 
  21
IDMA35206
MakeSchaudt
Model
YOM2004
ConditionGood Condition
PhotoSee Photo
center height 260mm
maximum diameter 520mm
grinding length 3000mm
work piece weight 500kg

CNC Siemens Sinumerik 840D SL
 
  22
IDMI7747
MakeTos Czech
ModelBUA63-2000
YOM
ConditionGood Condition
PhotoSee Photo
Max. Swing: 630mm
Max. Admit between Centres: 2,000mm
Max. Admit between Centres: 2,670mm (with Extension Tailstock)
Operating Voltage: 415V
Power: 37KW
Grinding Wheel: Dia 750mm x 80/100mm thick x 305 bore - A80 L3 V10 grade
Min. Dia of Grinding wheel that can be used: 570mm
Steady Rest (closed-end) for Dia 300mm – 1 no.
Steady Rest (closed-end) for Dia 200mm – 1 no.
Follow Rest (open-end) for Dia 250mm – 1 no.
Taper in Tailstock and Work-head: MT-6
Independent 4-jaw Chuck: Dia 315mm
Work-head Swivel: 900
Wheel-head Swivel: 300
Table Swivel: 6030I
Wheel-head Motor: 20HP, 1,440rpm
Work-head Motor: 2.0HP, 900/700/1,425rpm
Powerpack Oil Pump: 2.2KW
Lubrication Pump: 0.12KW
Coolant Motor: 0.5HP
Rapid Traverse Motor: 1.0HP

Accessories:
Internal Grinding Attachment
Dressing attachment for Internal Dia.
Side face dressing attachment
Wheel balancing Mandrel
Wheel balancing Stand
Wheel mounting fixture
Wheel flange – 2 nos.
Pipe Centres – 120 -210 dia
Dead center MT6 - 2 nos
 
  23
IDMA34613
MakeTos Czech
ModelBHU40/2000
YOM
ConditionGood Condition
PhotoSee Photo
Swinging Diameter - Maximum.15.74"
Distance Between Centers - Maximum.78.74"
Grinding Wheel.19.68" Dia. x 3.14" W. x 7.99" Bore
Diameter of Worn Grinding Wheel.13.77"
Swinging Diameter Ground w/Grinding Wheel Worn to13.77" - Minimum.1.96"
Face Width of Grinding Wheel - Maximum.7.87"
Width of Built-Up Grinding Wheel - Maximum.8.85"
Total of Widths of Individual Wheels Building Up Compound Grinding Wheel - Maximum.5.90"
Diameter Swung in Open Rest - Maximum.4.33"
Taper of Work Spindle.No. 5 Morse
Taper in Bore of Tailstock Barrel.No. 5 Morse
Diameter of Chuck.7.87"
Diameter Swung in Closed Rest - Maximum.4.33"
Bore in Sleeve Receiving Internal Grinding Spindle.3.93"
Swivel of Workhead.90 Degrees
Swivel of Wheelhead.+/- 45 Degrees
Swivel of Table to Either Side.8, 7, 6, 5, 4 Degrees
Speed to Wheel Spindle.1,230 - 1,470 RPM
Speed to Work Spindle:
- I Range (8).12, 20, 32, 50, 80, 125, 200, 315 RPM
- II Range (8).16, 25, 40, 63, 100, 160, 250, 400 RPM
Length of Longitudinal Travel of Table - Minimum.0.039"
Length of Longitudinal Travel of Table - Maximum.90.15"
Length of Cross Travel of Wheelhead (Infeed Movement).16.33"
Length of Hydraulically-Operated Quick Adjustment of Wheelhead.2.36"
Rate of Table Travel Steplessly Variable Within.1.96 - 196.85 In/Min.
Length of Cross Travel of Wheelhead Operated by Automatic Infeed (Infeed Movement).0.059 In/Dia.
Length of Automatic Infeed of Wheelhead in Table Reversals.0.00019 - 0.0019 In/Dia.
Rate of Automatic Infeed of Wheelhead for Plunge Grinding - Work Diameter.0.0039 - 0.19 In/Min
Wheelhead Motor.10.2 (20.4) Hp
Weight of Work Which May be Loaded Between Centers - Maximum.551 Lbs.
- In Chuck with Overhang.66 Lbs.
Catalog Weight (Including Equipment).14,410 Lbs.
EQUIPPED WITH:
Electrical Upgrade in 2016 w/Yaskawa Drives
Dynamic Balancing Systems (SBS Wheel Balancer) w/SB-5500 Controller
One-Axis Fagor DRO
Automatic Infeed (L-R-Both) w/Hi-Low Infeed Rate
Table Dwell & Tarry - Left-Right-Both
(2) Steady Rests
Table Mount Single Point Wheel Dresser
Wheel & Work Head Tachometer Read-Out
Barnes MPE-15 Paper Coolant Filtration System
 
  24
IDMA34603
MakeKent,Taiwan
ModelKGC-600H
YOMNew 1981
ConditionGood Condition
PhotoSee Photo
EQUIPPED WITH:
TABLE MOUNTED GRINDING WHEEL DRESSER
MITUTOYA GAUGING
ONE SHOT LUBRICATION SYSTEM
HYDRAULIC UNIT (STAND ALONE)
COOLANT (TANK & PUMP)

CATALOG SPECIFICATIONS:
SWING OVER TABLE, MAXIMUM 10.5"
DISTANCE BETWEEN CENTERS, NOMINAL 24"
GRINDING WHEEL DIAMETER, STANDARD 12"
GRINDING WHEEL WIDTH, STANDARD 1.5"
GRINDING WHEEL HOLE DIAMETER 5"
GRINDING WHEEL MOTOR, HORSEPOWER 3 HP
WORKHEAD MOTOR, HORSEPOWER 1/4 HP
WEIGHT, APPROXIMATELY 4300 LBS
 
  25
IDMA34454
MakeCincinnati,USA
ModelR328 X 2000
YOM1974/fully Refurbesh 2003
ConditionGood Condition
PhotoSee Photo
MAXIMUM GRINDING LENGTH: 2050MM
GRINDING WHEEL SIZE: 600MM X 80MM X 203MM
CENTER HEIGHT: 190MM
TABLE ROTATION: 7°
WORKPIECE WEIGHT BETWEEN CENTERS: 400KG
SPINDLE SPEED: 1-168 U/MIN
FEED (STEPLESS): 0.1-4 MM/MIN
GRINDING WHEEL DRIVE: 11KW
GRINDING WHEEL SPEED RANGE: 30 M/S
GRINDING DIAMETER: 350MM
TOTAL POWER REQUIREMENT: 19KW
TOTAL MACHINE DIMENSIONS: 6.9 X 2.8 X 2.2
MACHINE WEIGHT: 9.6 TON
top