VKengg.co.in

Category : Grinding Machines

Sub-Category : Grinder Surface Hydraulic

Total Machines Found : 23

Select | Machine Details
 
  1
IDMA39646
MakeOkomoto
ModelPSG
YOM1992
ConditionGood Condition
PhotoSee Photo
NOMINAL GRINDING CAPACITY . 16" x 32"
MAXIMUM HEIGHT UNDER STD. 12" WHEEL
TO TABLE SURFACE . 21.5"
TABLE SPEED, INFINITELY VARIABLE . UP TO 82' FPM
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL . 30"
AUTO CROSS FEED INCREMENT . 0.002" TO .80"
AUTO CONTINOUS CROSSFEED . 4' TO 40' FPM
CROSSFEED, MANUAL, HAND FEED PER REV. . 0.25"
GRAD. OF HANDWHEEL . 0.001"
MAX. CROSSFEED, MANUAL . 18"
AUTO INCREMENTAL DOWNFEED INCREMENTS . 0.00005" TO .0015"
POWER RAPID WHEEL POSITIONING RATE . 16" IPM
SPINDLE MOTOR . 5 H.P.
WHEEL SIZE . 12" X 1.5" X 5"
WHEEL SPEED . 6,500 SFPM
GRINDING WHEEL SPEED . 1,800 RPM

APPROX. MACHINE WEIGHT . 8,800 LBS.

EQUIPPED WITH:
"DX" PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED:
-SERVO DRIVEN DOWNFEED
-AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE & PLUNGE
OPERATIONS
-DUAL RATE AUTO DOWNFEED W/COARSE & FINE SELECTIONS
-DIGITAL DISPLAY FOR VERTICAL AXIS
-SPARKOUT PASSES (0 TO 5) W/AUTO TABLE PARK AT
COMPLETION OF GRIND CYCLE
-ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT
W/EACH GRAD. EQUIVALENT TO .00001", .0001" OR .001"
-POWER RAPID WHEEL POSITIONING

HYDRAULIC TABLE TRAVERSE & AUTOMATIC CROSSFEED
16" X 32" "KANETSU" ELECTRO-MAGNETIC CHUCK
O.S. WALKER "SMART SERIES" VARIABLE HOLD NEUTROFIER CONTROL
POWER OVER-THE-WHEEL DRESSER
COOLANT TANK & PUMP, PORTABLE ON CASTERS
5 H.P. SPINDLE MOTOR
PRESENTLY WIRED FOR 3/60/460 VOLT ELECTRICS
 
  2
IDMA39645
MakeOkomoto
ModelPSG-84
YOM1981
ConditionGood Condition
PhotoSee Photo
Description:
3 Axis, Over the Wheel Dresser, Spark Out, Electro Magnetic Chuck

Specifications:

16" x 32" Okamoto Model PSG-84 3 Axis Hydraulic Surface Grinder (1981)

Specifications and Equipment
Max Chuck Size: 16" x 32"
Max Table Movement: 37.4"
Automatic Table Travels: 32" x 16"
Max Distance Wheel to Table 20.5" Under: 20.5" Under 14" Wheel
Max Wheel Size: 14" x 1.5" x 5" Hole
Wheel Speed: 1800 RPM
Auto Longitudinal Feed Rate: Variable to 100 FPM
Rapid Wheelhead Feed Rate: 19 IPM
Auto Wheelhead Downfeed Increments: .00015" - .0011"

Equipped With:

3 Axis, Spark Out, 16" x 32" Electromagnetic Chuck with Variable Control, Over-the-Wheel Dresser, Incremental Down feed, Hydraulic Table and Saddle Feeds, Coolant
System, Wheel Hub and Nut, Manuals, 5 HP Spindle Drive Motor and Controls.
 
  3
IDMA39644
MakeOkamoto
ModelACC16-32DX-V
YOM
ConditionGood Condition
PhotoSee Photo
Table-W 16"
Table-L 32"
Horz/Vert Horz
Dimensions 132" x 87" x 82"
Weight 8,800 lbs
Max. Grinding (WxL) - 16" x 32"
Max. Table Travel (WxL) - 18" x 38"
Max. Distance Under 12" Wheel - 21.5"
Standard Chuck Size - 16" x 32" x 3.5"
Table Load Capacity Incl. Chuck - 1,540 lbs
Longitudinal Feed Rate - 1-82 ft/min
Hand Feed - 1.85"
Automatic Rough Feed - 0-0.0015" (11stages)
Automatic Fine Feed - 0-0.005" (7 Stages)
Number of Spark Outs - 0.5
Vertical Rapid Feed - 23.6" in/min
Wheel Size - 12" x1.5" x 5"
Spindle Speed - 1,800 rpm
Grinding Wheel Speed - 5 hp
Hydraulic Pump - 2 hp

Equipped With:

- Automatic Over-The-Wheel Dresser
- Built-In Chuck Controller
- Vertical Manual Pulse Generator
- Splash Cover w/Coolant Nozzle
- Table Parks at Right Side For Safety
- Table Top Diamond Dressing Tool & Holder
- Magnetic Separator For Coolant System
- Trans Verse Pole Chuck .748 Pole Divison
- Rough & Fine Grind Cycle
- Auto Traverse & Plunge Grinding Mode
- Diagnostic System
- Leveling Bolts & Plates
- Coolant System
 
  4
IDMI11434
MakeOkamoto
ModelPFG - 450
YOM
ConditionGood Condition
PhotoSee Photo
* Magnet Size :- 150 x 350 mm
* Table Size :- 510 x 160 mm
* Working Size :- 530 x 175 mm
* Machine Weight :- 1200 KG
 
  5
IDMI11428
MakeHwacheon
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Magnet size : 800x400mm
 
  6
IDMI11271
MakeProth
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table size - 1000x500 mm
 
  7
IDMI10934
MakeAlpa
ModelRTL700
YOM
ConditionGood Condition
PhotoSee Photo
Chuck: 700 x 300 MM
Grinding length: 700 MM
Grinding width: 300 MM
 
  8
IDMI10932
MakeELB (Germany)
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Size - 300 / 650mm
Height - 300
 
  9
IDMI9610
MakeJones & Shipman (England)
Model540
YOM
ConditionGood Condition
PhotoSee Photo
Grinding Capacity - 150 mm x 450 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Diameter - 178 mm
Current Magnet Size - 160 mm x 250 mm
Least Count - 1 Micron (0.001 mm)
Automatic Depth Adjustment "Auto-Cut" (Vertical Axis Automatic Feed Travel).
Currently equipped with a Magnetic Sine Table.
Micro Feed Adjustments in both Vertical & Cross Travel.
Machine is in excellent working condition.
 
  10
IDMA37068
MakeOkamoto
ModelPSG-125B
YOM1988
ConditionGood Condition
PhotoSee Photo
SPECIFICATIONS:
Grinding Length - Maximum.47.24"
Grinding Width - Maximum.20"
Distance Under 20" Wheel to Table Top.23.4"
Longitudinal Table Travel.51.22"
Column Cross Travel.20.86"
Table T-Slot (No. x Width).3 x 0.669"
Longitudinal Feeds.1-100 FPM
Hand Feed per Revolution- Longitudinal.0.984"
Cross Feeds:
- Intermittent.0.20" - 1.37"
- Continuous FPM.1-16.4 FPM
- Hand Feed per Revolution.0.2"
- Graduation of Handwheel.0.001"
Vertical Auto Incremental Down Feed.0.0002″ – .002″
Auto Feed Per Column Reversal.0.0002″ – .002″
Graduation of Handwheel - Vertical.0.0002"
Hand Feed per Revolution - Vertical.0.04"
Vertical Rapid Feed.12"
Grinding Wheel:
- Diameter.20"
- Width.2"
- Bore.5"
Spindle Speed.1100 RPM
Motor:
- Spindle.10 HP
- Hydraulic Pump.5 HP
- Vertical Rapid Feed.1/2 HP
Dimensions - Actual.159"(L-R) x 100"(F-B) x 89"(H)
Weight - Approximate.13,200 Lbs.
Electrics.220/440V, 3 Ph, 60 Hz
EQUIPPED WITH:
20" x 47-1/2" Electro Magnetic Chuck
Electro Magnetic Chuck Control
Acu-Rite DRO

*Preliminary specifications, subject to verification.
 
  11
IDMI9553
MakeELB,Germany
ModelSWBDE 15 NCK
YOM
ConditionGood Condition
PhotoSee Photo
Grinding Length : 1500 mm
Grinding Breadth : 680 mm
Grinding Height : 400 mm
Grinding Wheel Size : OD : 400 mm
ID : 127 mm
Thickness : 100 mm
Electro Magnet Size Grinding Dia : 1500 x 550 mm
 
  12
IDMI9392
MakePerfect
ModelPGH-60150AH
YOM
ConditionGood Condition
PhotoSee Photo
Travel: X-1500 x Y-800 Z-500mm
Table Size: 1650 x 600mm
Magnet 1520 x 600mm
 
  13
IDMI9015
MakeELB,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hydraulic Surface Grinder
Capacity - 800 x 400mm
 
  14
IDMI9014
MakeELB,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hydraulic Surface Grinder
Capacity - 800 x 400mm
 
  15
IDMI9013
MakeKent,Taiwan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table: 600 x 300m
All axes auto
with electromagnet /coolant
 
  16
IDMI9012
MakeSupertech
Model
YOM
ConditionGood Condition
PhotoSee Photo
All axes auto
with electromagnet /coolant
Table size: 600 x 400
 
  17
IDMI9008
MakeChevalier,Taiwan
ModelFSG-1020AD
YOM
ConditionGood Condition
PhotoSee Photo
Table: 250 x 500mm
Hydraulic
 
  18
IDMI9007
MakeProth
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table: 1000 x 400mm
All Axes auto
with electromagnet/Coolant tank
Hydraulic
 
  19
IDMI9006
MakeProth
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table: 800 x 400mm
All axes auto
with electromagnet /coolant
 
  20
IDMI8041
MakeKent,Taiwan
ModelKGS-515
YOM
ConditionGood Condition
PhotoSee Photo
Magnet Size - 1500 x 450 MM (Electromagnet)
Working Size - 1500 x 500 MM
With Coolant Trank
 
  21
IDMI8040
MakeBlohm
ModelHFS512
YOM
ConditionGood Condition
PhotoSee Photo
Magnet size :- 1200 x 500 MM (Electric)
Work size :- 1200 x 500 MM
Wheel size 400 x 100 x 127 MM
Spindle rotation speed :- 1400 RPM
Spindle power :- 18 KW
 
  22
IDMA35415
MakeZocca,Italy
ModelRAP3000/5
YOM1971
ConditionGood Condition
PhotoSee Photo
Table size: 3110x500 mm
X/Y/Z: 3000/500/630 mm
Grinding wheel dimension: 500x80x300 mm
Power grinding motor: 20 HP
Operation: hydraulic
Machine weight: approx. 15000 kg

Accessories:
2 Electric magnetic plates WAGNER, type: EP 210, 800x500 mm
2 Grinding flanges with grinding wheels
19 Machine feet
1 Package spare parts
1 Cooling system with paper filter and magnetic absorber
Instruction manual, Operator key
 
  23
IDMA35326
MakeNicco
Model
YOM
ConditionGood Condition
PhotoSee Photo
MAXIMUM TABLE LONGITUDINAL FEED --------------- 46.2"
MAXIMUM TABLE CROSS FEED ------------------------ 22.4"
MAXIMUM VERTICAL FEED OF SPINDLE HEAD ------- 20.5"
MAXIMUM DISTANCE SPINDLE CENTER TO
TABLE SURFACE -------------------------------------- 26"
MAXIMUM SIZE OF WORK ----------------------------- 39.4" X 19.7"
TABLE WORKING SURFACE ---------------------------- 19.7" X 43.3"
TABLE FEED, LONG. ( INFINITELY VARIABLE ) ------- 10 - 66 FPM
GRINDING WHEEL SIZE ( STANDARD ) --------------- 14" X 2" X 5"
MAIN DRIVE MOTOR ------------------------------------ 7-1/2 HP A.C.
HYDRAULIC PUMP MOTOR ----------------------------- 7-1/2 HP
EQUIPPED WITH ---
INCREMENTAL DOWNFEED
20" X 40" ELECTRO MAGNETIC CHUCK & CONTROLS
COOLANT SYSTEM WITH PAPER FILTRATION
HYDRAULIC OVER THE WHEEL DRESSER
top