V. K. Engineering - Buying & Selling of Machines made easy

Category : Machining Center

Sub-Category : Machining Center Horizontal

Total Machines Found : 359

Select

| Machine Details

ID	MA39453
Make	MAZAK
Model	FH8800
YOM	2008
Condition	Good Condition
Photo	See Photo
Main transmission Spindle speed range : 7000 1/MIN Adaptation cone : SK50 Number of axles : 4 Route X-axis travel : 1300 mm Y-axis travel : 1100 mm Z-axis travel : 1000 mm Workpiece Workpiece x : 1250 mm Workpiece and : 1250 mm Desk External length : 800 mm External width : 800 mm Worktable load : 2200 kg Tools Maximum weight : 30 kg Maximum tool diameter : 135 mm / 260 mm Maximum tool length : 500 mm - Maximum torque: 1177 nm Machine still running / 2 pallets, pallet size 800 mm x 800 mm/ Max. workpiece weight 2,200 kg/ Max. workpiece dimensions �1,250 mm x 1,250 mm/ Table indexing 0.001�, 360,000 positions/ Spindle motor 30 kW, 2-stage gearbox/ Max. torque 1,177 Nm/ Max. spindle speed 7,000 rpm/ SK-50, DIN69781/ 80-station tool changer/ Max. tool diameter 135 mm/260 mm/ Max. tool length 500 mm/ Max. weight Tool weight 30 kg/ Through-spindle cooling, 70 bar/ Mayfran ConSep 2000 chip conveyor/ Mazak B monitoring, probe preparation (without probe)

ID	MA39371
Make	Yasda
Model	YBM80N63
YOM	1990
Condition	Good Condition
Photo	See Photo
Pallet size：630x630mm Number of pallets：8 Min. indexing increment：1 degree Spindle：6000rpm Controller：FANUC 0iMD ATC：120

ID	MA39366
Make	Brother
Model	TC-20A
YOM	2005
Condition	Good Condition
Photo	See Photo
Max. spindle speed 25,000min‒1 30,000min‒1 Travels X:200mm Y:185mm Z:250mm Tool storage capacity 16pcs. Rapid traverse rate (XYZ-area) 40m/min�40m/min�45m/min

ID	MI11273
Make	Heller
Model	MC 16
YOM	2004
Condition	Good Condition
Photo	See Photo
X Travel:630 mm Y Travel:630 mm Z Travel:630 mm Control:Siemens 840 D Numbers Of Pallets:2 Pallet Size :400*500 mm Pallet Indexing:360.000 Continues Tool Taper :HSK63 Spindle Speed:12000 RPM

ID	MA39230
Make	MCM Action
Model
YOM
Condition	Good Condition
Photo	See Photo
Travel X - 2200 mm Travel Y - 1175 mm Travel Z -1250 mm CNC Siemens Sinumerik 2 pallets -1250 mm/each Max. weight allowed on table - 180 kg ATC -120 ISO 50 Spindle - 4000 rpm Full 4th axis

ID	MA39188
Make	OKK
Model	HM80
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
X-Axis Travel: 1400 mm Y-Axis Travel: 1100 mm Z-Axis Travel: 1050 mm Spindle Taper: BT 50 Spindle Speed: 10,000 rpm ATC: 60-tool capacity Table Size: 800 x 800 mm Pallet Changer: 2 pallets Full-axis Heidenhain�Optical�Scales Controller: Fanuc 0iMD

ID	MA39079
Make	Heller
Model	MC i 16
YOM	2007
Condition	Good Condition
Photo	See Photo
x-travel :630 mm y-travel :630 mm z-travel:630 mm total power requirement:30 KW weight of the machine :12500 Kg dimensions of the machine

ID	MI11184
Make	MAZAK
Model	Nexus6800II
YOM	2013
Condition	Good Condition
Photo	See Photo
Pallet Size: 24" x 24" (630x630 mm) Travels: X-Axis: 41" Y-Axis: 36.4" Z-Axis: 38.6" Pallet Size: 24" x 24" Number of Pallets: 2 Tool Capacity: 80 ATC Spindle Taper: CAT 50 Spindle Speed: 8000 RPM Spindle Motor: 50 HP Table Indexing: 360 Degree Max Workpiece Height: 61" Max Workpiece Dia: 41"

ID	MA39037
Make	Doosan
Model	NHP 6300
YOM	2017
Condition	Good Condition
Photo	See Photo
Table 630 x 630 mm (24.8� x 24.8�) Travel X 1050 mm (41.3�) Y 900 mm (35.4�) Max. Workpiece Dia. 1050 mm (41.3�) L 1350 mm (53.1�) Spinde Speed 10000 rpm (34/50 Hp) Tool Type BT50 ATC 40 tools Chip conveyor Weight 18000 Kg Size 7410 x 3479 x 3930 mm

ID	MA39036
Make	Doosan
Model	NHM 6300
YOM	2016
Condition	Good Condition
Photo	See Photo
Pallet Size 24.8� x 24.8� (630 x 630 mm) Travels : X 41.3� (1050 mm) Y 33.5� (850 mm) Z 39.4� (1000 mm) Rapid Feed Rate X/Y/Z 1181 ipm (30 m/min) Cutting Feed Rate 590.6 ipm (15000 mm/min) 2 pallets Indexing 1 Deg. Load Capacity 2645.5 lbs (1200 Kg) Max. Workpiece Size 41.3� x 53.1� (1050x 1350 mm) Spindle Speed 6000 rpm (35/22 Hp) Tool Type BT 50 ATC 60 tools Dimensions 256.8� 154.7� x 137.6� (H) 6522 x 3930 x 3495(H) mm Weight 20500 Kg

ID	MI11183
Make	Makino
Model	A81
YOM	2004
Condition	Good Condition
Photo	See Photo
Pallet 630x630 X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 20.000 Spindle drive power kW: 50 Control - Professional 3

ID	MA39035
Make	Heckert
Model	HEC630Athletic
YOM	2006
Condition	Good Condition
Photo	See Photo
Control system Siemens . Sinumerik 840 D Clamping area of table . 800 x 630mm Travel X-axis . 1200mm Travel Y-axis . 950mm Travel Z-axis . 1200mm Spindle speed . 20-6000/min. Number of driven axes . 4 Pressure of cooling . 15bar Spindle taper . HSK-A 100. Number of pallets . 2 Machine weight . 24500kg Machine dimensions l x w x h . 7600 x 5100 x 4150 mm

ID	MI11182
Make	Toshiba Shibaura
Model	BMC63
YOM	1997
Condition	Good Condition
Photo	See Photo \| See Video
Table Size :- 630 x 630mm Travel Size :- X-800mm Y-910mm Z-800mm Spindle Taper :- ISO 50 Auto Pallet Changer :- 2 Pallets Auto Tool Changer :- 60 Tools Max. table Load Capacity :- 1000 Kg Rapid Traverse (X, Y) :- 15000mm/min Controller :- Fanuc Oi Mate (Absolute)

ID	MI11181
Make	OKK
Model	HM60
YOM	2001
Condition	Good Condition
Photo	See Photo
Pallet Size :- 630 x 630mm Travel :- X-760mm Y-730mm Z-800mm Spindle Taper :- CAT 50 Spindle Speeds :- Up to 12,000 RPM Spindle Drive :- 30 HP Controller :- Fanuc

ID	MA38944
Make	HUAYOU
Model	HMC2W-500
YOM
Condition	New
Photo	See Photo \| See Video
Machining range Travel（X/Y/Z） mm 1400/630/540 worktable to spindle center(up-down Y travel) mm 450-1080 Spindle nose to worktable center (Left-right Z travel) mm 100-640 Single table machining range (LWH) mm 570540630 Max workpiece (single table) mm �786�630 Working table Distance between two table center mm 850 Rotary table mm 500500 Max load kg 600 Spindle Spindle speed rpm 8000/belt taper hole of spindle 　 BBT40/∅160 SYNTEC Spindle power KW 11KW/15KW Spindle Torque N.m 69.4/94.6 Axes motor X/Y/Z1/Z2 KW 5.9/5.9(brake)/5.9/5.9 Speed Axis rapid traverse（X/Y/Z1/Z2） m/min 24/36(36)/36 Cutting Feed mm/min 1-8000 ball screw X：5012 Y/Z1/Z2： 4012 Disk Magazine /ARM tool pcs 　 32 tool Max Dia/Length/weight 　 �80mm/400mm/10Kg tool Max Dia without neighbors mm �125 tool choosing way 　 anyone tool change time(tool-tool) S 2.5 10kg tool change time S 15 Accuracy Positioning accuracy（X/Y/Z） mm �0.O05/300 repeatable accuracy（X/Y/Z） mm �0.O03/300 Machining Max drilling hole mm (Normalizing medium carbon steel) mm �50 Max tapping hole mm (Normalizing medium carbon steel) mm M20 milling cm�/min cm�/min 200 Other Air/Air Pressure 　 280L/min 6-8bar Power Capacity volume kVA 65 cooling box volume L 440 Machine overall dimension mm 530026802800 Machine Weight kg 9000 2.2 Machine tool standard configuration item Name QTY other 1Syntec System 220MA 1 2Disc Magazine 1 32 pcs 3Chip removing 1 Caterpillar(front) 4Automatic Lubrication System 5Nitrogen balancing Cylinder 1 6Trichromatic lamp 7Spindle Processing blower 1 LED 8Clean air gun, water gun 1 9Lighting device 1 10Electric cabinet air conditioner 1 LED 2.4 Equipment major parts brand Item Equipment major parts Brand other 1System controller Taiwan Syntec 220MA 2Spindle unit Taiwan VYU CHENG 3Screw bearing NSK/FAG 4Ball screw Taiwan HIWIN/PMI 5Linear Guides Taiwan HIWIN/PMI 6Drive and motor Taiwan Syntec 7Magazine Taiwan 8Lubrication system China 9Main electrical components Schneider 3. Oil and grease Application area Name Capacity Standard Brand recommend Others Hydraulic station (Non-standard part) Hydraulic oil 80L No.46 Shell Tellus 46 Or Great Wall HF-2 46 Replace it after 3 months of initial use; replace it every 6 months thereafter Bearing and worm gear Lithium based grease NBU-15 Kl�ber Germany 1/3 of the bearing clearance volume Lubrication of guide rails and lead screws guide oil 2L 32# Winter68 Summer Shell Tonna T32 (10 degrees) T68 (10 degrees) Great Wall HG32 (10 degrees) HG68 (10 degrees)Fill when the oil level is below the minimum liquid level 4. customer preparation for Equipment installation item requirement others 1 Factory foundation Situation confirmation The machine weighs about 9 T Recommended for quick-drying cement for secondary bolting of anchor bolts: High strength non-shrinkage grout 2 Incoming power cable preparation Cable YJV 410 3 Compressed air access preparation Gas source filtration accuracy is 100μm, Tracheal outer diameter 10 mm 5 Transport confirmation 1. Confirm the transportation method according to the plant and surrounding road conditions 2. Meet the net transport size of the largest part of the machine tool 3. Confirm the lifting method according to the actual height of the plant 6 Installation preparation Wire rope, loading more than 10T 5. General requirements for equipment and installation and commissioning 5.1 General requirements for equipment Equipment use environment requirements Maintaining a constant level of ambient temperature is an essential factor for precision machining. 5.1.1 The ambient temperature requirement is 10 � C ~ 40 � C, when the ambient temperature is 20 � C, the humidity should be 40 ~ 75%. 5.1.2 In order to keep the static accuracy of the machine tool within the specified range, the optimum ambient temperature requirement is 15 �C ~ 25 �C, and the temperature difference must not exceed � 2 �C / 24h. 5.2 Power supply voltage: 3 phase, 380V, voltage fluctuation � 5% range, power frequency: 50HZ. 5.3 If the regional voltage is unstable, the machine should be equipped with a regulated power supply to ensure the normal operation of the machine. 5.4 The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 6mm2, and the grounding resistance is less than 4 ohms. 5.5 In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the requirements of the air source, a gas source purification device (dehumidification, degreasing, filtration) should be added before the air intake of the machine tool. 5.6 Keep away from direct sunlight, vibration source and heat source, and keep away from high frequency generators and electric welders to avoid machine tool failure or machine tool accuracy. 6. Guarantee 6.1 The warranty period is 24 months from the date of acceptance. 6.2 During the warranty period, the seller provides the buyer with free spare parts for timely repair service and maintenance. The purchaser shall pay the relevant maintenance costs if it is found to be faulty due to improper operation of the buyer or non-manufacturing quality such as self-removal and modification, and the appearance or internal damage of the machine tool caused by excessive storage time. 6.3 After the warranty period, the seller still provides online services and technical guidance free of charge. Provide timely supply of spare parts to Party A at a preferential price. When you need to send someone to the on-site maintenance, you will be charged according to the seller's standard.

ID	MA38937
Make	HUAYOU
Model	V2TW 400
YOM
Condition	New
Photo	See Photo
new machining centres with 2 spindle, or 2 tables for producing parts competitively Machining range Travel (x/y1/y2/z1/z2) :1750/540/540/550/550 spindle nose to worktable :210-760 mm spindle center to column guard:630 mm 2 spindle center distance :400 mm 2 table distance :300 mm Work table Table Size(L/W):1000500 mm Table pcs :2 pcs Table max load:800 kg T Slot /Wide/spacing :185100 mm Spindle Spindle Max Speed :8000 rpm spindle taper:BT40 mm spindle power (continuous/30 min):7.5/11 KW Feed xaxis motor power :5.9kw y1/y2 axis motor power :5.9kw z1/z2 axis motor power:5.9 kw Rapid Speed (x/y1/y2/z1/z2)36/48/48/48/48 m/min Cutting Feed:1-8000 mm/min Tool Magazine Tool Pcs :242 T Tool Diameter (neighbor tool/without neighbor tool):80/125 mm Tool Max Length ::300 mm Tool Max weight:7 kg Tool Change Time(T-T):2.5 s Others Power Capacity Volume:30 kva Cooling Box Volume:500 L Overall Dimension(l/w/h):593026703040 Machine Weight:8500 Kg

ID	MA38867
Make	YCM
Model	H500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Pallet size - 500x500 mm X axis - 700 mm Y axis - 650 mm Z axis - 650 mm Spindle Taper - BT 50 Spindle speed - 60-6,000 rpm(10,000 rpm) Max. load on table - 600 kg ATC - 40T

ID	MI11081
Make	Ams
Model	HMC-400XL
YOM	2024
Condition	Good Condition
Photo	See Photo
Table size - 400x400 mm X axis - 600 mm Y axis - 500 mm Z axis - 500 mm Max. load on table - 400 kg Spindle - BT-40 Spindle Speed - 6000 rpm Spindle power - 15/18 kw

ID	MI11080
Make	OKK
Model	HM50
YOM	1998
Condition	Good Condition
Photo	See Photo
Pallet size - 500x500 mm X axis - 760 mm Y axis - 730 mm Z axis - 800 mm Control - Fanuc 16M Taper - BT50 Automatic tool changer - 80 station Spindle speed - 8000 rpm max. tool weight - 20 kg

ID	MI11079
Make	Mori Seiki
Model	NH5000/40
YOM	2005-06
Condition	Good Condition
Photo	See Photo
* Pallet Size= 500 mm x 500 mm ⁠Control : MSX-501 ( Fanuc 18-imb ) cnc control ⁠X Axis Travel : 730 mm * ⁠Y Axis Travel : 730 mm * ⁠Z Axis Travel : 850 mm * ⁠Max. Workpiece Swing Diameter= 800 mm * ⁠Max. Workpiece Height : 1000 mm * ⁠Spindle Speed Range 14,000 RPM * ⁠CAT 40 Taper * ⁠120-Position Automatic Tool Changer * ⁠1 degree index table * ⁠Through Spindle coolant * ⁠with Turbo Systems Chip Conveyor * ⁠Cool Jet Systems Chiller

ID	MI11078
Make	Mori Seiki
Model	SH63
YOM
Condition	Good Condition
Photo	See Photo
TABLE 630x630 X-840mm Y-760mm Z-840mm ATC - MAS BT50

ID	MI11077
Make	Kia
Model	H63
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CONTROL FANUC 18iMB PALLET SIZE 630 X 630 MM TRAVERSES (XYZ) 950 X 825 X 760 MM SPINDLE TAPER BT50 SPINDLE SPEED 4,500 RPM MAX. LOAD CAPACITY 1,000 KG MAX. TOOL DIA 110 MM MAX. TOOL LENGTH 600 MM MAX. TOOL WEIGHT 20 KG MACHINE FLOOR SPACE 3,610x5320 MM MACHINE HEIGHT 3140 MM MACHINE WEIGHT 14,000 KG

ID	MI11076
Make	Kia
Model	40G
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control: NEW FAGOR 8055 Table size (mm): 400 x 400 Store tools (pcs): 32 Rotational speed (rpm):8000 Stroke along the x-axis (mm):650 Stroke along the y-axis (mm):600 Stroke along the z-axis (mm):650

ID	MI11073
Make	DAHLIH
Model	MCH800
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
Pallet size - 980x980 mm Max. Table load - 2000 kg X axis - 1350 mm Y axis - 1000 mm Z axis - 1000 mm Distance of spindle end to table center - 300-1300 mm Distance of spindle center to table surface - 50-1050 mm Spindle Nose - NT50 Spindle Speed - (Standard) 4500 RPM With ATC Machine Weight - 24000 kg

ID	MA38775
Make	Niigata
Model
YOM	New in 2000
Condition	Good Condition
Photo	See Photo
Pallet Size: 19.7 x 19.7" Travel: X-Axis 29.5" Y-Axis 29.5" Z-Axis 29.5" Pallet Index: 360,000 Degree Spindle Speed: 35 - 12,000 RPM Spindle Taper: Cat 50 Spindle Nose to Table Center: 5.91" - 35.4" Spindle Center to Table Top: 1.96" - 31.46" Tools: 60 ATC Main Motor: 35/40 HP AC Number of Pallets: 2 Rapid Traverse Rates: 1,575 IPM Pallet Load Capacity: 1320 lbs. Spindle Torque: 260 ft. lbs. Spindle Acceleration: 1.5 Seconds Pallet Change Time: 6 Seconds Max Tool Weight 33: lbs EQUIPPED WITH: Fanuc 16im CNC CONTROL 4 Axis Machine Graphic Display 14" LCD Coolant Thru Spindle - High Pressure 1000 psi Hole Shooter 60 Tool Magazine Rigid Tapping Chip Conveyor Tool Life Management Niagara Flood Coolant High Torque Spindle Probing System Tool Breakage Detection System

ID	MI11056
Make	Mori Seiki
Model	SH63
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size:630 x 630mm X Axis:840mm Y Axis:750mm Z Axis:840mm Controller:MSD 516 Taper:BT 50 Spindle RPM:10000 Pallets:2 ATC:60 Chip Conveyor:Yes Guideways:LM

ID	MI11055
Make	DMG
Model	DMC55H
YOM
Condition	Good Condition
Photo	See Photo
PALLET SIZE 400 X 400 STROKE 550 X 550 X 550 INTEGRATED SPINDLE 20 KW / THRU COOLANT

ID	MI11054
Make	DAHLIH
Model	MCH800
YOM	1997
Condition	Good Condition
Photo	See Photo
CONTROL FANUC-15M TABLE SIZE- 800X800 MM TRAVEL X AXIS 1350 MM TRAVEL Y AXIS 1000mm TRAVEL Z AXIS 1000mm SPINDLE SPEED 3500 RPM SPINDLE TAPER BT-50 SPINDLE POWER 25 HP ATC 60 TOOLS POWER 220 V

ID	MI11053
Make	Kitamura
Model	HX500
YOM	2005
Condition	Good Condition
Photo	See Photo
Pallet Size: 500 mm X 500 mm X Travel: 870 mm Y Travel: 710 mm Z Travel: 660 mm B Travel: 0.001� CNC Control: Fanuc 16iM ATC: 60 Spindle Taper: CT50 Spindle rpm: 12000 Rapid Rate: 50000 mm/min Feed Rate: 30000 mm/min Excellent Condition machine equipped with: Through Spindle Coolant Dual Ball Screw & Dual Axis motors for X, Y & Z Axis

ID	MI11052
Make	OKK
Model	HM500
YOM	2006
Condition	Good Condition
Photo	See Photo
Pallet-W 510mm Pallet-L 510mm X 825mm Y 700mm Z 800mm Fanuc 18i-MB RPM 14000.0 # ATC 60.0 Taper BT50 Pallet Capacity 1200 pounds Pallet Indexing (B-Axis) .001 degree X-Axis Travel 33.4" Y-Axis Travel 27.5" Z-Axis Travel 29.5" Rapid Traverse Rate (X/Y/Z) 1,889 ipm Spindle Taper BT 50 Spindle Speed 14,000 rpm Spindle Motor (HP) 30 hp Tool Changer Capacity 60 Coolant Through Spindle yes Machine Dimensions 137" x 208" x 118" Machine Weight 28,000 pounds Equipped With EQUIPPED WITH: - Fanuc 18i-MB Control 60 position automatic tool changer (2) 19.7" x 19.7" Pallets - Coolant Thru Spindle - Remote Hand Held MPG Cool thru spindle blaster high pressure pump

ID	MI11051
Make	OKK
Model	HP500S
YOM	2005
Condition	Good Condition
Photo	See Photo
Fanuc 180is-MB CNC Control, 4-axis, Pallet Size 19.7" x 19.7" (500x500 mm) Full B-axis 0.001 degrees, Travels X-24.8", Y-24.4", Z-23", CAT 40, 12,000 rpm 60 ATC, Chip Conveyor, Coolant Tank & Pump, Coolant Thru Spindle

ID	MI11050
Make	Ams
Model	CMH 500
YOM	2012
Condition	Good Condition
Photo	See Photo
Table 500x500 Spindle Tapper BT40 Fanuc OiMD

ID	MA38744
Make	Makino
Model	A51
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table dimensions: 400x400 mm Longitudinal travel X: 560 mm Cross travel Y: 560 mm Z vertical stroke: 600 mm B axis: 360000 Control - Professional Pro 5 Same Model 2 machines available

ID	MA38724
Make	Makino
Model	A77
YOM	1998
Condition	Good Condition
Photo	See Photo
Control : Professional 3 size of pallet 500 x 500 mm (1.0 ͦ) x-travel 800 mm y-travel 750 mm z-travel 770 mm numbers of pallets 2 Spindle speed 10000 U/min (30Kw) tool taper BT 50 ATC 120 tools weight of the machine ca. 17 t dimensions of the machine ca. 7,9x4,1x3,3 m Same model 6 machines for sale

ID	MI11027
Make	MAZAK
Model	Ultra650
YOM	1997
Condition	Good Condition
Photo	See Photo
Table Size : 630 mm x 630 mm Pallet Changer : Available : Twin Pallets Travel X: 1016 mm Travel Y 800 mm Travel Z : 785 mm Table : B Axis : 1 Degree Power Spindle Motor : 25 KW Spindle RPM : 8000 RPM Coolant Through Spindle : Available Control : Mazatrol M 32 Spindle Taper : Cat 50 Magazine :120 tool Atc : Arm Type

ID	MI11026
Make	Nigata
Model	SPN63
YOM	1997
Condition	Good Condition
Photo	See Photo
Table Size : 630 mm x 630 mm Pallet Changer : Available : Twin Pallets Travel x: 1000 mm Travel Y 880 mm Travel Z : 800 mm Table : B Axis : 1 Degree Power Spindle Motor HP Spindle RPM : 8000 RPM Coolant Through Spindle : Available Control : Fanuc 16MB Spindle Taper : Cat 50 Magazine : 60 tool Atc : Arm Type

ID	MI11025
Make	Makino
Model	A66
YOM	1999
Condition	Good Condition
Photo	See Photo
Table Size : 500 mm x 500 mm Pallet Changer : Available : Twin Pallets Travel X : 800 mm Travel Y 700 mm Travel Z : 640 mm Table : B Axis : 1 Degree Power Spindle Motor : 30 HP Spindle RPM : 12000 RPM Chip conveyor : Available Coolant Through Spindle : Available Spindle Oil chiller : Available Control : Professional 3 : Fanuc Spindle Taper : Cat 40 Magazine :120 tool Atc : Arm Type

ID	MI11024
Make	MAZAK
Model	FH 4800
YOM	1999
Condition	Good Condition
Photo	See Photo
Table Size : 400 mm x 400 mm Pallet Changer : Available : Twin Pallets Travel X : 560 mm Travel Y 610 mm Travel Z : 560 mm Table : B Axis : 1 Degree Power Spindle Motor : 22 KW Spindle RPM : 25000 RPM Coolant Through Spindle : Available Control : Mazatrol Fusion 640 Spindle Taper : Cat 40 Magazine tool Atc : Arm Type

ID	MI11023
Make	MAZAK
Model	HTC400
YOM	1998
Condition	Good Condition
Photo	See Photo
Table Size : 400 mm x 400 mm Pallet Changer : Available : Twin Pallets Travel X : 560 mm Travel Y 510 mm Travel Z : 510 mm Table : B Axis : 1 Degree Power Spindle Motor : 11 KW Spindle RPM : 10000 RPM Coolant Through Spindle : Available Control : Mazatrol M Plus Spindle Taper : Cat 40 Magazine tool Atc Arm Type

ID	MI11015
Make	Toyoda,Japan
Model	FA1050
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size (x2): 1,050 mm x 1,050 mm Table Index: Rotary Table X-Axis Travel: 1,600 mm Y-Axis Travel: 1,400 mm Z-Axis Travel: 1,150 mm Rapid Traverse (X, Y, Z axes): 24 m/min Max Workpiece Swing: 1,600 mm Max Workpiece Height: 1,550 mm Max Table Load: 3,000 kg Available Spindle: #50 Spindle Speed: 14,000 RPM Auto Tool Changer Capacity: 120 Tools EQUIPPED WITH: Fanuc 16iM CNC Control Chip Conveyer and Pump Filtration Unit Rotary Index Table  120 Position Automatic Tool Changer 2 Station Automatic Pallet Changer Machine weight: 35 Ton

ID	MI11004
Make	Quaser
Model	MK 60H
YOM	2000
Condition	Good Condition
Photo	See Photo
CNC Fanuc 18 iMB Double Pallet 500x500 mm X/Y/Z 710 x 610 x 610 mm Spindle speed 10000 rpm Total power 60 Kw Addictions -60 Tools magazine -High preassure & coolant trough spindle -Chip conveyor

ID	MA38694
Make	Doosan
Model	ACL-HM 630
YOM
Condition	Good Condition
Photo	See Photo
Pallet size : 630x630 Control. : Fanuc-18i RPM. : 6000 Year. : 2008 Atc 63 Tools - BT-50

ID	MA38582
Make	DMG MORI
Model	NH8000DCG
YOM	2007
Condition	Good Condition
Photo	See Photo
Table - 800x800 mm X axis - 1400 mm Y axis - 1200 mm Z axis - 1300 mm 800�5APC ATC-50 BT-50 10000rpm T-index：1� Control - FANUC-31iA

ID	MA38560
Make	MAZAK
Model	FH 480
YOM	1995
Condition	Good Condition
Photo	See Photo
Main Drive Number of spindles 1 Spindle speed range 12000 rpm Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm B-Axis Movement 360� x 1� Workpiece Workpiece weight 400 kg Table Outer length 360 mm Tools Slots in storage 30 Type of tool holder SK40 Measurements width 3300 mm Measurements depth 4400 mm Measurements height 2700 mm Machine weight 9800 kg

ID	MA38455
Make	Starrag
Model	SX051B
YOM	2001
Condition	Good Condition
Photo	See Photo
number of spindles 1 Y axis - 640 mm X axis - 650 mm Z axis - 585 mm control - Siemens 840 D A - axis360 � B - axis155 � feed X/Y/Z/-axis0 - 40.000 mm/min rapid traverse X/Y/Z40 m/min spindle diameter in front bearing70 mm tool taper HSK A 63 (DIN 69893) turning speeds50 - 15.000 U/min number of tools in the magazine60 diameter of tools max.160 mm weight of tools max.10 kg tool length - max.350 mm Required air-pressure6 - 10 bar total power requirement75 kW weight of the machine - 13 ton

ID	MA38417
Make	Shibaura
Model	BMC100E
YOM	2015
Condition	Good Condition
Photo	See Photo \| See Video
Table - 1000x1000 mm 10 APC X - 1600 mm Y - 1250 mm Z - 1200 mm ATC - 180 T Spindle - BT 50 RPM - 5000 Controller - TOSUNC

ID	MI10786
Make	MAZAK
Model	Ultra650
YOM
Condition	Good Condition
Photo	See Photo
Pallet size - 630�630 X1016 Y800 Z800 ATC 80

ID	MI10747
Make	Doosan
Model	HC400
YOM	2010
Condition	Good Condition
Photo	See Photo
Control Fanuc 32iM Pallet Size 400 x 400mm Traverses (xyz) 600 x 560 x 560mm Rapid (x,y,z) 40m/min Spindle nose BT40 Spindle speed 10,000rpm

ID	MI10726
Make	Makino
Model	A55E
YOM	2004
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size 400 x 400 Fanuc professional 3 (Fanuc 16i Series) Spindle Speed RPM 14000/min. No of Tools Magazine Capacity: 91 Tools ATC Rapid Speed 90 Mtrs per min Rapid. Thru Spindle Coolant System Travels X Axis 650 mm Y Axis 650 mm Z Axis 700 MM Spindle Taper CAT 40 Number of palettes 2 B Axis � Continuous Rotary Max table weight kgs - Spindle RPM 50-140000 tr/min

ID	MA38351
Make	Doosan
Model	H100
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
X AXIS TRAVEL 2000 MM Y AXIS TRAVEL 1120 MM Z AXIS TRAVEL 1000 MM DIST. BETWEEN CENTRE OF SPINDLE TO PALLET AXIS Y: 75 - 1195 MM DIST. BETWEEN SPINDLE NOSE TO CENTER OF PALLET AXIS Z: 200 - 1200 MM N.02 PALLET 1000 X 1000 MM PALLET CAPACITY 2000 KG (EACH) ROTARY TABLE POSTIONING : 4 X 90 � WORK FEEDS AXES: X-Y-Z 5000 MM/MIN RAPID FEEDS AXES: X-Y-Z 12 MT /MIN RAPID FEED AXIS: B 3 RPM SPINDLE TAPER ISO 50 DIN 69871 A SPINDLE SPEED 6000 RPM FEATURES Spindle taper: ISO 50 DIN 69871 A ISO Longitudinal travel: 2000 mm Cross travel: 1120 mm Vertical travel: 1000 mm Table dimension: 2 PALLET 1000 X 1000 mm Spindle speed: 6000 rpm CNC: FANUC 18i MB n� of Tool change post.: 60 Pallet N�: 2 STANDARD EQUIPMENT CNC FANUC 18i MB TOOLS CHANGER 60 POST CHIP CONVEYOR INT. COOLANT SYSTEM EXT. COOLANT SYSTEM 30 - 70 BAR MACHINERY WEIGHT27000 KG

ID	MI10697
Make	Kiwa,Japan
Model	PMH-40
YOM
Condition	Good Condition
Photo	See Photo
Pellert Size - 400x400

ID	MI10624
Make	Dahlih,Taiwan
Model	MCH800
YOM	1997
Condition	Good Condition
Photo	See Photo
CONTROL FANUC-15M TABLE SIZE- 800X800 MM TRAVEL X AXIS 1350 MM TRAVEL Y AXIS 1000mm TRAVEL Z AXIS 1000mm SPINDLE SPEED 3500 RPM SPINDLE TAPER BT-50 SPINDLE POWER 25 HP ATC 60 TOOLS POWER 220 V

ID	MI10623
Make	Makino
Model	MCB1513
YOM	1999
Condition	Good Condition
Photo	See Photo
Pallet Size -800 x 800mm Longitudinal movement of the X axis table -1500MM Vertical movement of the Y axis spindle -1350mm Transversal movement of the Z axis upright -1050mm Distance between the table clamping surface and the spindle center - 100mm Transversal distance between table center and spindle head - 220mm Maximum height from the table surface -1500mm Maximum turning diameter in the working space - 1600mm Maximum rotation diameter on the implant1400 X 1200 mm Table size -800 x800 mm Maximum weight supported by the pallet - 3000Kg Maximum spindle speed- 10-4500rpm-1 Maximum spindle speed with direct thread synchronized - 2000rpm-1 Axis speed with feed in work - 10000 mm min-1 Axis speed with rapid feed - 20000mm min-1 Maximum tool weight - 30Kg Maximum tool diameter without limitations - 100mm Maximum tool diameter with two adjacent free spaces -300mm Maximum tool length 650mm

ID	MA38257
Make	Toyoda,Japan
Model	FH80S
YOM	2006
Condition	Good Condition
Photo	See Photo
PALLET SIZE -800�800 mm Pallet height (from the floor) -1300 LOADING HEIGHT FROM FLOOR -1 320 2) Movement amount STROKE ▶X-axis stroke (table left/right movement) - X AXIS STROKE -1 350 mm ▶Y-axis stroke (vertical movement of shaft head) Y AXIS STROKE - 1150 mm ▶Z-axis stroke (back and forth movement of column) Z AXIS STROKE -1150 mm ▶DISTACE FROM SPINDLE CENTER LINE TO TOP OF PALLET m] 50~1200 ▶Distance between spindle end face and table center [ m] 200~1350 DISTANCE FROM SPINDLE NOSE TO CENTER OF ROTARY INDEX TABLE 3) Feedrate ▶Rapid speed X, Y, Z軸 [m/min] 24 000 RAPID FEEDRATE X, Y, Z AXIS B-axis BAXIS [min] [5.6] C out ▶Cutting feed rate X, Y, Z axis = [mm/min] 1~24 000 CUTTING FEEDRATE X, Y, Z AXIS B軸 B AXIS [/min] [1~1000] ONC output) 4) Spindle SPINDLE ▶Spindle rotation speed SPINDLE RPM ▶Main shaft diameter (front bearing inner diameter) FRONT SPINDLE DIA ▶Spindle end taper SPINDLE TAPER - [min [10~6000 (high output gear)] GEARED SPINDLE -ml $110 50 SPINDLE TAPER

ID	MI10599
Make	Makino
Model	MC65
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
able Size :- 500 x 500mm Travel :- X-635mm Y-560mm Z-510mm Spindle Taper :- BT-50 Controller :- Fanuc 6m

ID	MI10598
Make	Mori Seiki
Model	MH50
YOM	1989
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size :- 500 x 500mm Travel Size :- X-800mm Y-650mm Z-750mm Spindle :- BT50 ATC :- 40 Tools Controller :- Fanuc Machine Diemension (Length x Depth x Height) :- 4675 x 2660 x 2700mm Machine Weight :- 14 Ton Approx

ID	MA38202
Make	Makino
Model	HNC1210-A30
YOM
Condition
Photo	See Photo
Pallet: 1650x1000 - single pallet X:1250,Y:1000,Z800 BT50 Controller Fanuc FS-11M (need controller change)

ID	MI10470
Make	Makino
Model	MC86
YOM	1998
Condition	Good Condition
Photo	See Photo
Pallet size - 630 � 630 X - 900 , Y - 700 , Z - 700 SK - 50 , 40 tool ATC Fanuc - 15 M Control

ID	MI10431
Make	MAZAK
Model	FH 4800
YOM	2001
Condition	Good Condition
Photo	See Photo
Pallet Size :- 400 x 400mm X-Axis Movement :- 560mm Y-Axis Movement :-610mm Z-Axis Movement :- 560mm Main spindle :- 12,000 RPM Max Part Weight :- 400 Kg Number Of Tool Pockets :- 40 Spindle Taper :- CAT 40 Controller :- MAZATROL FUSION 640M Machine Dimension (LxWxH):- 2680 x 4160 x 2635mm Machine Weight :- 9400 Kg

ID	MA38027
Make	MAZAK
Model	FH5800
YOM	2002
Condition	Good Condition
Photo	See Photo
Pallet dimensions: 500x500 mm Pallet number: 6 nr. Table rotation: 1 degree Longitudinal X axis travel: 710 mm Vertical Y axis travel: 610 mm Transversal Z axis travel: 660 mm Rapid movements: 50 m/min. Spindle connection: 40 ISO Rotation speed: 12000 rpm. Engine power: 22/15 Kw

ID	MA38010
Make	Toshiba
Model	NX76B
YOM	2003
Condition	Good Condition
Photo	See Photo
Twin Pallet 630mm x 750mm Pallet Load 1300kg Spindle Speeds 50-8000rpm X = 850mm, Y = 760mm, Z = 780mm, 120 Tools, BT50 Full fourth axis High pressure, through spindle coolant Orbital boring capability TOSNUC 888.2 CNC Control

ID	MA37949
Make	MAZAK
Model	H500
YOM	1992
Condition	Good Condition
Photo	See Photo
Pallet size: 19.7″ x 19.7″ (500 mm) Pallet Capacity: 2,200 lbs 4th Axis Pallet Indexing: 1 Degree X-Axis Travel: 28″ Y-Axis Travel: 25.6″ Z-Axis Travel: 25.6″ Spindle Taper: CAT #50 Spindle Speeds: 5,000 RPM Spindle Motor: 20 HP Auto Tool Changer: 40 Positions Maximum Tool Diameter: 5.12″ Rapid Traverse Rates: 945 IPM Approx Machine Dimensions: 313″ x 178″ x 118″ Approx Machine Weight: 31,000 lbs EQUIPPED WITH: Mazak Mazatrol M-32 CNC Control Through Spindle Coolant.

ID	MA37856
Make	MAZAK NEXUS
Model	HCN-8800II
YOM
Condition	Good Condition
Photo	See Photo
Pallet Size 31.5" X 31.5" Number Of Pallets 2 Pallet Weight Capacity 4850 LBS. Pallet Surface to Spindle Center 3.94" ~ 35.43" Pallet Center To Spindle Gage Line 5.91" ~ 37.4" Workpiece Dimensions 35.43" X 39.37" X - Axis Travel 55.12" Y - Axis Travel 47.24" Z - Axis Travel 52.1" B - Axis Travel .001 NC ROTARY Rapid Traverse Rates X, Y, Z 2362 IPM Cutting Feed Rate 2362 IPM Spindle Speed 16,000 RPM Spindle Taper HSK 100 Number Of Ranges 2 Main Motor 50 HP Automatic Tool Changer 240 ATC Tool Diameter 4.92", 9.84" Tool Length 24.8" Tool Weight 66 LBS. Tool Change Time 5.0 SEC. Machine Weight 66,138 LBS. Equipped with MAZATROL MATRIX NEXUS 2 CONTROL 19" COLOR LCD EIA/ISO CODE INPUT FUNCTION (STANDARD) ADDITIONAL EIA/ISO FUNCTIONS (REQUIRES EIA/ISO) CARDBUS I/F (2-SLOT) LAN PORT USB I/F (2-PORT) B) SYNCHRONIZED TAPPING (G84. 2 I G84. 3) GOO SLOPE CONSTANT MAZACC-2D SOFTWARE (SHAPE COMPENSATION) (G61.1) ADD. WORKPIECE COORDINATE SYS.300-PAIRS INCH/METRIC CONVERSION TBR AND MMS IN EIA/ISO PROGRAM MACRO SPINDLE MULTI-POINT ORIENT (M-CODE/1 DEG.) AUTO TOOL LENGTH MEASUREMENT AND BREAKAGE DETECTION ABSOLUTE POSITIONING SYSTEM Y-AXIS TRAVEL 47. 2" (1200MM) TOOL HIVE 240 TOOLS (HSK) / MULTI-TOOL LOADING PREP. FOR VISUAL TOOL ID/ CTM REQUIRED (USED FOR TOOL HIVE) MANUAL PULSE GENERATOR 1 [DETACHABLE) PREP. FOR CHIP CONVEYOR REAR (CONSEP-1) THRU MILL-SPINDLE COOLANT 8KG/ 113 PSI W/PREP. FOR 1000PSI SWING-TYPE NIAGARA COOLANT SYSTEM ONE SET OF MANUALS [CD) SPINDLE 16000 RPM (HSK 100) (REQUIRES HSK MAGAZINE) SPINDLE CHILLER UNIT COOLERS FOR BALL SCREW (X, Y, Z-AXIS) PHC (W/ CELL-CONTROLLER(C/C)) APPLICATION NC ROTARY TABLE (360,000 POSITIONS) 2 PALLET CHANGER 2 PALLET CHANGER/ CHANGE TO LOCATION BORE T-SLOT PALLETS AUTO POWER OFF(BREAKER TRIP) OPERATOR DOOR INTERLOCK WITH LOCK-SWITCH PREPARATION FOR MMS-B OPTICAL TYPE OMP60 ROLLER GUIDES KEN OKUYAMA DESIGN ELECTRICAL CONTROL BOX UL STANDARD (480V) POWER TRANSFORMER FOR NORTH AMERICAN MKT SHAPE COMP. FOR ROTARY AXES (REQUIRES NC ROTARY TABLE) DYNAMIC COMPENSATION 2,1 (ONLY NC-TABLE) MAZACC-3D HIGH-SPEED SOFTWARE PACKAGE (G61.1 & G05P2 HIGH SMOOTHING CONTROL (REQUIRES MAZACC-3D) CONSEP 2000 CHIP CONVEYOR REAR DISPOSAL (DUAL BELT) (MAYFRAN) MAZAK SUPER FLOW T8 HIGH PRES. COOLANT UNIT (1000PSI/8GPM) RENISHAW OMP60M OPTICAL PROBE SYSTEM WITHOUT PREPARATION

ID	MA37820
Make	Dahlih,Taiwan
Model	MCH630
YOM
Condition	Good Condition
Photo	See Photo
3 units of Dahlih MCH -630 Available.

ID	MA37819
Make	Toshiba
Model	BMC630
YOM	1996
Condition	Good Condition
Photo	See Photo
The spindle drive unit must be replaced Or suitable for retrofitting new controller.

ID	MI10269
Make	Mitsui Seiki
Model	HR6A
YOM
Condition	Good Condition
Photo	See Photo
Technical details Pallet Size: 1000 mm Control: FANUC 18i X/Y/Z: 1300/ 1000 / 1000mm Table indexing 1 degree increments Spindle Speeds: 4500 RPM Spindle Taper: 50 ISO Tool Changer: 60 station Coolant and Swarf conveyor

ID	MA37774
Make	Mori Seiki
Model	NH 4000 DCG
YOM	2004
Condition	Good Condition
Photo	See Photo
CNC Control: CNC Control: MSG 501 MAPPS II Xmm: Xmm: 560 Y mm: Y mm: 560 Zmm: Zmm: 630 Bmm: Bmm: 360,000 Load capacity kg table Table load capacity Kg 400 Max. tool day. due to neighborg pots are empty 140 Max. length of tool mm Max. tool length mm 400 Max. tool weight kg Max. tool weight kg 8 Tank capacity refrigerant l. Coolant tack capacity l. 500 Cooling through spindle bar.

ID	MA37770
Make	Mori Seiki
Model	NH 4000 DCG
YOM	2007
Condition	Good Condition
Photo	See Photo
CNC CONTROL MORI SEIKI MSG-501 MACHINE WEIGHT (kg) 22.200 DIMENSIONS (larg. x profondit�. x alt.) (mm) 3.710 x 5.640 x 3.270 NUMBER OF AXIS 3 CE DECLARATION YES SPINDLE Cone dimension BT-50 Max spindle speed (rpm) 10.000 Max spindle motor power (cont./30 minuti) (kW) 25/30 CAPACITIES X axis (mm) 900 Y axis (mm) 800 Z axis (mm) 980 Distance spindle center - pallet surface (mm) 100 - 900 Distance spindle nose - pallet center (mm) 100 - 1.080 Max piece size (diam. x height) (mm) � 1.000 x 1.300 TABLE Dimension (mm) 630 x 630 Number of station 2 stations with 1 pallet each. Load capacity (kg) 1.200 Rotation indexed 360 position FEEDRATES Rapids X/Y/Z axis (mm/min) 50.000 Working feeds X/Y/Z axis (mm/min) 1 - 50.000 Motors power (kW) X,Z: 7,0 \| Y: 5,5 TOOL CHANGER Tool cone BT-50 Pull stud Type Mori Seiki 90� Tool storage capacity 60 stations Max tool diameter (with full adjacent stations) (mm) � 300 / �110 Max tool lenght (mm) 630 Max tool weight (kg) 30 ACCESSORIES MORI SEIKI NH 6300 DCG Tank and chip conveyor High pressure pump for lubricant throughout the spindle line Coolant system for spindle line Tool holders kit

ID	MA37764
Make	Mitsui Seiki
Model	HU63A
YOM	2009
Condition	Good Condition
Photo	See Photo
Control: CNC - 5 Axis - incl. 4x pallets and 1x clamping tower - incl. podium x-travel 900 mm y-travel 900 mm z-travel 900 mm control 31iM-A5 Fanuc Main spindle: turning speed range - main spindle 120 - 12.000 min/-1 power capacity - main spindel 30 / 25 kW Torque 420 Nm tool taper SK 50 pallet changer: numbers of pallets 2 size of pallet 630 x 630 mm Tool-Presetter: number of toolpositions 120 pos. feeds: rapid traverse X: 12 m/min rapid traverse Y/Z: 24 m/min rapid traverse B: 3.600 o/min rapid traverse A: 2.160 o/min feed speeds X/Y/Z: 0,1 - 10.000 mm/min total power requirement 75 kVA weight of the machine ca. 26 t dimensions of the machine ca. 6,7 x 7,0 x 3,8 m Chip conveyor Coolantsystem high pressure coolant 70 bar through spindle coolant B-axis 0,001� hydraulic system Documents oil mist extraction triple signal light paper band filter spindle oil cooler Automatic Tool Changer 120 pos. pallet changer 2 pos. test probe elektr. hand wheel direct travel-measuring-system X/Y/Z

ID	MI10253
Make	Starrag-Heckert
Model	CWK630
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
Pallet size- 630x630 Swing dia-1000mm Height-1050 mm NC rotary table X travel -1000mm Y travel-910mm Z axis -835 mm Spindle tapper -HSK100 No of tool -60 Guideway - LM guide Spindle power - 30kw

ID	MA37760
Make	MAG
Model	NBH 135
YOM	2004
Condition	Good Condition
Photo	See Photo
Control: CNC Pallet changing device: 180 � NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50m� Double chamber filter 60m� for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Sinumerik 840 D b-axis 360 � turning speeds 16.000 U/min rapid traverse 60 m/min tool taper HSK 63 tool magazin: 144 Pl�tze total power requirement weight of the machine ca. 17 t dimensions of the machine ca. 7,4 x 3,35 x 3,7 m

ID	MA37759
Make	Mori Seiki
Model	NH 4000 DCG
YOM	2004
Condition	Good Condition
Photo	See Photo \| See Video
CNC controller: MSX-501 Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 620 B-axis degrees: 360� (0,001� index) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 400x400 Maximum workpiece size (D x H) mm: �630x900 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 18/11 Cooling Cooling through the Spindle Center bar: 50 Tool system Tool holder: CAT-40 Tool magazine slots: 60 Max. Tool Diameter With free neighboring places mm: �140 With occupied neighboring places mm: �70 Max. Tool Length mm: 400 Max tool weight kg: 8 S0zjh Tool-to-tool time s: 0,9 Chip-to-chip time s: 2,8 Equipment Chip conveyor Basic machine dimensions / weight Length mm: 4.004 Width mm: 2.397 Height mm: 2.711 Weight kg: 9.600

ID	MA37758
Make	DMG MORI
Model	NHX5000
YOM	2011
Condition	Good Condition
Photo	See Photo
Control: CNC - 2 pos. palletchanger - WITHOUT tools x-travel 730 mm y-travel 730 mm z-travel 880 mm control M 730 BM MAPPS IV Main spindle: max. spindle speed 12.000 min/-1 power capacity - milling spindle 15 / 11 kW max. Torque 102 Nm tool taper ISO 40 distance spindle center to table 80 - 800 mm distance Spindlenose and center of table 70 - 950 mm pallet changer: numbers of pallets 2 size of pallet 500 x 500 mm max. workpiece weight 500 kg max. workpiecediameter 800 mm max. workpiece height 1.100 mm change time of pallets 9,5 sec Indexing-time 1,49 sec B-axis (table) 1 � Tool-Presetter: number of toolpositions 60 pos. tool taper ISO 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 550 mm change-time tool to tool 0,9 sec feeds: rapid traverse 60 m/min feed speeds max. 60.000 mm/min Tipp feed 0 - 5.000 mm/min total power requirement 34 kVA weight of the machine ca. 11,1 t dimensions of the machine ca. 5,5 x 3,0 x 2,8 m Documents Chip conveyor Coolantsystem through spindle coolant IF Knoll Automatic Tool Changer B-axis pallet changer Oil Dust Skimmer breakage control Magazine thread milling

ID	MA37757
Make	Mori Seiki
Model	NH 4000 DCG
YOM	2007
Condition	Good Condition
Photo	See Photo
X-axis travel:560mm Y-axis travel:560mm Travel path Z axis:630mm

ID	MA37755
Make	Makino
Model	A55E
YOM
Condition	Good Condition
Photo	See Photo
Fanuc 16iM table : 400 x 400 mm travel X,Y, Z: 559- 559- 559 mm Spindle: 14.000 r.p.m; ATC : 60; HSK 63A

ID	MI10249
Make	BFW,India
Model	MPH 500E
YOM	2014
Condition	Good Condition
Photo	See Photo
Pallet Size - 500x500

ID	MI10230
Make	Doosan Daewoo
Model	ACE HP 5100
YOM	2006
Condition	Good Condition
Photo	See Photo
able Dimension 500 x 500 mm. Number of tables 2 Units. X Axis 850 mm. Y Axis 700 mm. Z Axis 750 mm. Pallet Index Degree Min. Angle 0,001� Number of Axis 4 Taper BT 40 N� of Tool at Toolmagazine 40 Tools Chip Conveyor Machine Dimension 5380 x 2780 x 3025 mm. Total Power Required 68,1 Kva. Machine Weight 15.000 KG

ID	MA37702
Make	Mori Seiki
Model	MH50
YOM	1991
Condition	Good Condition
Photo	See Photo
Pallets / 500 x 500 mm X-axes-800 mm Y-axes- 650 mm Z-axes -750 mm Table dimensions -500 x 500 mm (2x) Depth of throat (uprights--spindlecenter) -50 / 700 mm Admission in spindle (ISO) -BT-50 Power on the spindle-15/11 kW Control -Fanuc Toolstore- yes Tools -60 positions Frequency-6 000 rpm Number of pallets -2x Length-4675 mm Depth - 2660 mm Height - 2700 mm Weight - 14 ton

ID	MI10207
Make	Daewoo/ace
Model	H500
YOM	1998
Condition	Good Condition
Photo	See Photo
Table Size: 500mm x 500mm  X: 800mm  Y: 650mm  Z: 650mm  Power: 25 HP  Spindle Speed: 6,000 RPM  Spindle Taper: 50  ATC: 60  Control: Fanuc 16-M

ID	MI10205
Make	Leadwell,Taiwan
Model	MH500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table Size: 500 x 500mm  X-Axis Travel: 750mm  Y-Axis Travel: 650mm  Z-Axis Travel: 700mm  ATC: 40  Pallet Size: 500mm  Spindle Speed: 6000 RPM  Spindle Taper: #50  Equipped With: Fanuc 18M Control  Chip Conveyor  Coolant Through Spindle

ID	MI10169
Make	WMW
Model	CWK630
YOM
Condition	Good Condition
Photo	See Photo
Pallet size- 630x630 Swing dia-1000mm Height-1050 mm NC rotary table X travel -1000mm Y travel-910mm Z axis -835 mm Spindle tapper -HSK100 No of tool -60 Guideway - LM guide Spindle power - 30kw

ID	MA37641
Make	Kuraki,Japan
Model	CMN6A
YOM	1990
Condition	Good Condition
Photo	See Photo
CNC VMC combined Fanuc 15T, BT50, Travel : X 1500 x Y 760 x Z 600 x W 780 mm, ATC30

ID	MA37640
Make	Makino
Model	A81
YOM	2013
Condition	Good Condition
Photo	See Photo
CAT50 242 tools Running hours 20341 10,000rpm Professional 5 0.001 degree

ID	MA37639
Make	Mitsui Seiki
Model	HU150A
YOM	2006
Condition	Good Condition
Photo	See Photo
Control : Fanuc 15i-M series Travels : X - 2.400 mm Y - 2.000 mm Z - 1.500 mm B - 0.001� - 360� Spindle Specs.: Taper : BT50 ( ISO50 ) Speeds : 6000 RPM Power : 26kW Torque : 2.212 Nm IKZ ( Coolant Through Spindle ) : 40 Bar ATC magazine: 120 Seats Pallet size : 1500 x 1500 mm Max. Load : 10 Tons Indexing: 0.001� - 360� Pallets Changer : 2 nos. Chip Conveyor Machine Weight: ca. 40 Tons still under production

ID	MA37598
Make	Matsuura
Model	ES-450H2
YOM	200
Condition	Good Condition
Photo	See Photo
X-Axis 17.71" Y-Axis 15.74" Z-Axis 15.74" RPM 15,000 RPM # ATC 30 Taper BT-40 Pallet-W 11.81 mm Pallet-L 11.81 mm Max Table Load 440 lb # Axis 3 Rapid Traverse (X/Y/Z) 1,181 in/min. Made In Japan Control CNC (Fanuc 18i-M) Equipped With Spindle chiller Automatic pallet changer Chip conveyor

ID	MI10059
Make	OKK,Japan
Model	HM60
YOM
Condition	Good Condition
Photo	See Photo
1) FANUC 16iM 2) INTEGRATED 22KW BT 50 Through spindle coolant . 3) ALL AXIS ON LM GUIDE WAYS 4) SERVO MAGAZINE ROTATION 5) X-AXIS - 800MM 6) Y-AXIS:- 730MM 7) Z AXIS:- 780MM 8) B AXIS:- 1 DEGREE INDEX TABLE.

ID	MI10053
Make	Yamazaki Power Center
Model	v15
YOM
Condition	Good Condition
Photo	See Photo
1700 X 750 Table Size

ID	MA37490
Make	Toyoda,Japan
Model	FA800S
YOM	2007
Condition	Good Condition
Photo	See Photo
XYZ 1350 x 1150 x 1150mm RPM6000 0.001� indexing , BT50, Table size 800 x 800mm ATC 120

ID	MA37489
Make	Makino
Model	A71
YOM
Condition	Good Condition
Photo	See Photo
Pallet 19.7" x 19.7" X Axis 28.7" Y Axis 28.7" Z Axis 31.5" 2 Speed Range Spindle 10,000 RPM Rapid Traverse 1,968 in/min Max. Work Piece 31.5" x 39.4" Max. Payload 1,540 Lbs. ATC Capacity 60 Spindle Taper 50 Tool to Tool 1.7 Seconds Chip to Chip 3.2 Seconds Max. Tool Length 17.72" Max. Tool Diameter 11.81" Max. Tool Weight 44 Lbs.

ID	MA37444
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
800 x 800 pallet X� Travel: 1230mm �Y� Travel: 985mm �Z� Travel: 837mm Spindle Speeds: up to 4500 RPM Spindle Taper: ISO 50 Spindle Motor: 30 HP 80 station Tool Changer With: Large selection of CAT 50 Tools

ID	MI9936
Make	MAZAK
Model	H630N
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Travel X � 1000 mm Y - 800 mm Z � 750 mm Spindle taper- BT 50, ATC No.of tools- 120, Spindle speed-20- 4500rpm, Control-Fanuc OiMC POWERCENTER Table Size: 630 mm x 630 mm No. of axis - 3 + pallet changer CNC Control System Retrofitted to New FANUC OiMC

ID	MI9877
Make	Kia
Model	H40
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Nbr of pallets 2 Axis X 647 mm Axis Y 597 mm Axis Z 647 mm CNC FANUC 15-MB Palette length 400 mm Palette width 400 mm Max. part weight 400 kg Number of tool pockets 30 Spindle taper NT 40 Spindle rotation speed 6000 rpm ------------------- Length x width x height nan � nan � nan Weight 11000 kg

ID	MA37322
Make	Dahlih,Taiwan
Model	MCH500
YOM	2014
Condition	Good Condition
Photo	See Photo
Pallet Change 500mm

ID	MA37303
Make	Pegard
Model	Precivit 2 BC TRT 1800
YOM	2003
Condition	Good Condition
Photo	See Photo
Description: Pallets size 1800x2500 mm Max workpiece weight per pallet 20.000 kg Machine weight 60.000 kg Travels: X-axis: table displacement 3,500 mm Y-axis: Vertical displacement 2,500 mm W-axis: Stand longitudinal displacement 1700 mm Z-axis: Working spindle movement 1,000 mm B-axis: Rotary table 360000 pos. Working spindle Diameter 150 mm Diameter in the front main bearing 220 mm Spindle with steep cone according to DIN 2079 ISO 50 Digital three-phase motors, drive power ( 100%) 60 kW Speed range of the working spindle under load, infinitely variable in four areas 10.3000 min-1 Maximum torque 5250 Nm Feed Feed force (at 603 ED) (in 10 min cycle) on X and Y axis 20000 N Feed force (at 603 ED) (in 10 min cycle) on W and Z axis 38,000 N Torque of the rotary axis in the control loop (at 60 3 ED) at full load 5600 Nm at half load 7100 Nm Clamping torque of the B-axis 35000 Nm Positioning accuracy Positioning accuracy in X, Y, and W according to VDl/DGQ P = 0.010 mm/1000 mm Positioning accuracy in B according to VDl/DGQ P = 15"/360� Additional positioning in B(programmable) 4 x 90� +/- 2 angle seconds

ID	MA37273
Make	DAHLIH
Model	MCH500
YOM	2014
Condition	Good Condition
Photo	See Photo
BT50 Pallet change 500mm ravel X 750 mm Y 680 mm Z 600 mm Power 18.5 kW RPM 6,000 RPM # ATC 60 Taper BT50 Pallet-Table 500 mm. Dimensions 3,170 x 4,920 mm Weight 15,000 KG

ID	MA37256
Make	Makino
Model	D500
YOM	2016
Condition	Good Condition
Photo	See Photo
320 TOOLS STROKES 550 X 1000 X 500 MM SPINDLE SPEED RANGE: 14000 1/MIN NUMBER OF AXIS: 5 PRODUCTION HOURS: 20000

ID	MA37232
Make	Makino
Model	A81
YOM	2014
Condition	Good Condition
Photo	See Photo
CNC controller: MAKINO PROFESSIONAL 5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 20.000 Spindle drive power kW: 50 Cooling Cooling through the Spindle Center: 70 Tank capacity: 3.100 Tool system Tool holder: HSK-A100 Tool magazine slots: 300 Equipment Chip conveyor High pressure pump

ID	MA37231
Make	Makino
Model	A81
YOM	2012
Condition	Good Condition
Photo	See Photo
CNC controller: MAKINO PROFESSIONAL 5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 20.000 Spindle drive power kW: 50 Cooling Cooling through the Spindle Center: 70 Tank capacity: 3.100 Tool system Tool holder: HSK-A100 Tool magazine slots: 300 Equipment Chip conveyor High pressure pump

ID	MA37228
Make	Makino
Model	A77
YOM	1999
Condition	Good Condition
Photo	See Photo
X 800 Y 750 Z 769 BT 50 SPINDLE SPEED 10000RPM ATC 90EA THROUGH SPINDLE COOLANT LINEAR SCALE 1 DEGREE TOOL MEASUREMENT That is it in a research center in korea

100

ID	MA37225
Make	Makino
Model	A77
YOM	1998
Condition	Good Condition
Photo	See Photo
machine has 244 magazine tool holders 10 tables 630 x 630 Y700 X600 Z800 1 pallet in machine and 1 outside machine control PROFESSIONAL 3 MAKINO ISO 50

101

ID	MA37224
Make	Makino
Model	A77-A90
YOM	1997
Condition	Good Condition
Photo	See Photo
controllo: PROFESSIONAL 3 MAKINO ISO 50 machine has 244 magazine tool holders 10 tables 630 x 630 Y700 X600 Z800 1 pallet in machine and 1 outside machine control PROFESSIONAL 3 MAKINO ISO 50

102

ID	MA37221
Make	Makino
Model	A77
YOM	2003
Condition	Good Condition
Photo	See Photo \| See Video
Table Size : 630x630 mm XYZ : 750x750x800 mm Spindle : 300 mm HSK A-100 Tool Holder The spindle rotates at 18,000 revolutions and the water is discharged from the center. 131 tool magazine

103

ID	MI9731
Make	Makino
Model	A55E
YOM	2001
Condition	Good Condition
Photo	See Photo
B- Rotary table Spindle - 12000rpm Taper - Hsk 63 No.of tool - 60 pocket Spindle through coolant Pallet size - 400�400mm System - fanuc 18imb with pcmci and Lan facilities With MPG .

104

ID	MI9712
Make	Nigata
Model	SPN63
YOM	1998/99
Condition	Good Condition
Photo	See Photo
Fanuc 16-M Control Pallets Size : 630 mm x 630 mm 2645 LB Max Pallet Weight X- 1001 mm Y- 879 mm Z- 800 mm 1 Degree B-Axis 40 HP 50-12000 RPM CAT 50 Spindle Taper 60-Tool Automatic Tool Changer Dual Pallet Changer High Pressure Coolant System Chip Conveyor

105

ID	MA37181
Make	Mori Seiki
Model	NH5000/40
YOM	2014
Condition	Good Condition
Photo	See Photo
Frequency - 50HZ Phase - 3 Voltage AC - 200 V Full Load Current - 165 A Current Rating of the Spindle Motor - 151 A Interrupting Capacity - 5KA Electrical Diagram No - NH501DB0513 Rated Power - 57 KVA Weight of Machine - 10,700 Kgs

106

ID	MA37153
Make	MAZAK
Model	FH6800
YOM	2000
Condition	Good Condition
Photo	See Photo
Mazatrol PC.FUSION 640.M Spindle speed: 10,000 rpm 2x Pallet table: 630 x 630 Pin attachment: SA.50 Strokes: XYZ: 1050 x 800 x 900 Axis B: 360.00 positions in continuous Tool changer: 80 Spindle center coolant Paper lubricant filtration + lifting pump Length measurement automatic tool Tool probe: RENISHAW

107

ID	MA37046
Make	Makino
Model
YOM	2016
Condition	Good Condition
Photo	See Photo
Axis travel X Y Z Axis travel 1500 x 1350 xx 1300 mm B axis Indexing angle 360 Four Axes simultanous movement Worktable Working surface size (diameter x height) : 1900 x 1100 mm Maximum Load : 10t Spindle Spindle Speed -: 20 - 1500 rpm Continous variable speed gear : 3 Taper : 7/24 Cone N0.50 Bearing Internal Diameter : 100 mm Drive Motor (30 minutes/continuous -: 30/25kW Torque (10 minutes/Continous) 353/235NM Cooling/Lubrication : mandrel/bearing internal pressure Extension from column stretching dam board : 550 mm Feed Rate Fast Feed Rate : 25000 mm/min ATC Tool Holder type : JIS B6339 50T Pop Rivet Type : MAS403-P50 T1 Tool magazine : 30 Maximum tool Diameter 125 mm/200mm(conditional) Maximum tool Length : 550 mm Maximum tool weight : 20kg Tool maximum torque : 20Nm Accuracy Positioning accuracy (JIS) : 0.002mm Repositioning accuracy (JIS) : 0.001mm Machine Footage Width*Depth : 5050x5650mm Height : 3690mm Weight : 25t

108

ID	MA37019
Make	Toyoda,Japan
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
500x 500 6APC. Index 5 Deg BT50. ATC48 station FANUC15M

109

ID	MA37014
Make	Haas
Model	EC300
YOM	2005
Condition	Good Condition
Photo	See Photo
Pallet Size 300 x 300 mm No. of Pallets 2 Max Pallet Load 250 kg X Axis Travel 500 mm Y Axis Travel 458 mm Z Axis Travel 356 mm B-Axis Positioning Spindle Speed 8,000 RPM Spindle Motor CAT40 Spindle Taper 20 H.P. Tool Changer Positions 24+1 Haas CNC Control Pallet Changer 4th Axis Programmable Coolant USB, Remote Jog Handle, Coolant Tank and Pump Chip Conveyor

110

ID	MI9523
Make	Shibaura
Model
YOM
Condition	Good Condition
Photo	See Photo
X-TRAVEL-800 Y-TRAVEL-630

111

ID	MI9402
Make	Kia
Model	H63
YOM	2003
Condition	Good Condition
Photo	See Photo
CONTROL FANUC 18iMB PALLET SIZE 630 X 630 MM TRAVERSES (XYZ) 950 X 825 X 760 MM SPINDLE TAPER BT50 SPINDLE SPEED 4,500 RPM TOOL CHANGE CAPACITY 60

112

ID	MI9401
Make	Daewoo
Model	ACE H400P
YOM	2001
Condition	Good Condition
Photo	See Photo
CONTROL FANUC 18i-MB PALLET SIZE 400 X 400 MM TRAVERSES (XYZ) 600 X 560 X 560 MM SPINDLE TAPER BT40 SPINDLE SPEED 8,000 RPM (TBC) TOOL CHANGE CAPACITY 40

113

ID	MI9347
Make	Mori Seiki
Model	SH630
YOM
Condition	Good Condition
Photo	See Photo
Pallet Size:630 x 630mm X Axis:840mm Y Axis:750mm Z Axis:840mm Controller:MSC 502 ( Fanuc 18iMB Control ) Taper:BT 50 Spindle RPM:10000 Pallets:2 ATC:60 Chip Conveyor:Yes Guideways:LM

114

ID	MI9260
Make	BFW,India
Model	630
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Pallet size - 630mm Spindle taper - BT 50 Tool changeing - 60 tools atc With through cool

115

ID	MA36835
Make	Doosan
Model	HP6300
YOM	2007
Condition	Good Condition
Photo	See Photo
TECHNICAL MACHINE BENEFITS: - WORKING FEED RATES: 1:24000 MM/MIN - BALL SCREW DIAMETER AND PITCH: DIAM. 50XP16 MM - POSITIONING ACCURACY MM +/- 0. 005 / FULL STROKE - REPEATABILITY MM +/- 0. 002 - X,Y,Z AXIS MEASURING SYSTEM: INCREMENTAL ENCODER - B-AXIS MEASURING SYSTEM: ABSOLUTE ENCODER - SPINDLE NOSE DISTANCE - PALLET CENTRE MM 150-900H - SPINDLE AXIS DISTANCE - PALLET SURFACE: 75-925 MM Control :fanuc series 18i-MB X axis movement :1000mm X axis Rapid Traverse :48m/min Y axis Movement :850mm Y axis Rapid Traverse :48m/min Z axis Movement : 850mm Z axis Rapid Traverse :48m/min

116

ID	MI9206
Make	Nigata
Model	SPN63
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Fanuc 16-M Control Pallets Size : 630 mm x 630 mm USA IMPORT 2645 LB Max Pallet Weight X- 1000 mm Y- 880 mm Z- 800 mm 1 Degree B-Axis 40 HP 50-12000 RPM CAT 50 Spindle Taper 60-Tool Automatic Tool Changer Dual Pallet Changer High Pressure Coolant System Chip Conveyor

117

ID	MI9136
Make	Mitsubishi
Model
YOM
Condition	Good Condition
Photo	See Photo
Mitsubishi HMC 800X800 X 1,000 mm Y 800 mm Z 800 mm Power : 15 kW RPM : 3,600 RPM # ATC : 60 Pallet-W : 800 mm Pallet-L: 800 mm Taper : ISO50 # Axis : 4 ControlCNC : (Seimens 802D)

118

ID	MI9107
Make	MAZAK
Model	HTC400
YOM
Condition	Good Condition
Photo	See Photo
Table Size: 400mm x400mm Twin Pallet 4 Axis 16(2) Pallet X axis Travel : 560mm Y axis Travel : 510mm Z axis Travel : 510mm Pallet- W :398.78mm Pallet-L : 398.78mm Maximum Spindle speed :10,000 rpm Tool Taper : BT-40 Auto Tool Changer : 30 ATC With Chip Conveyor. Controller : Mazatrol M Plus.

119

ID	MI9086
Make	HYUNDAI WIA
Model	KH63G
YOM	2012
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size 2 x 630 x 630 MM Max. Pallet Load 2 x 1,000 KGS Max. Working Size 1,120 Dia x 875 H MM Pallet Indexing 1.0 0.001 DEG Spindle Taper #50 Spindle Speed 4,500 8,000 RPM Spindle Power 22.0 / 18.5 26.0 / 18.5 KW Spindle Torque 1,071 / 901 1,267 / 901 NM Spindle Drive 2 STEP GEARED Travels X/Y/Z 950 / 825 / 760 MM Dist. Table Top to SP Centre 0 ~ 825 MM Dist. Table Centre to SP Nose 175 ~ 935 MM Rapid Traverse Rate - X/Y/Z 20 / 20 / 20 M/MIN Slideways HARDENED & GROUND BOX GUIDEWAYS ATC 40 60 90 120 ATC - TT Time 6 SEC ATC - CC Time 11 SEC APC - Number of Pallets 2 APC - Exchange Type SHUTTLE EXCHANGE

120

ID	MI9079
Make	Dahlih,Taiwan
Model	MCH630
YOM	2006
Condition	Good Condition
Photo	See Photo
Weight (kg) - 18000 Capacity (Kva) - 60 Fanuc - Oi-MD Spindle Power kw (hp) - 18.5 Max Spindle RPM - 6000 Table size mm - 630630 Table Max Load - 1200 Rapid Feed Rate (XYZ)m/min - 242424 Cutting Feed (mm/min) - 8000mm Axes Travel (XYZ) - 1000850800 Magazine Capacity - 60 Max Tool Size (Length/Dia) - 400120 Max Tool Weight (kg) - 20 Hydraulic Tank (lit) - 100 Spindle Taper - BT50 Coolant Tank - 800 Max Machining Dia (mm) - 920-swing dia

121

ID	MI9078
Make	OKK,Japan
Model	HM40
YOM	2000
Condition	Good Condition
Photo	See Photo
CNC: FANUC 21 iMB Double Pallet: 400�400 mm X travel: 560 mm Y travel: 510 mm Z travel: 560 mm Spindle Speed: 10000 rpm Spindle Motor: 22 KW 60 Tools Magazine High Preassure trough Spindle Chip Conveyor

122

ID	MI8967
Make	Makino
Model	A77
YOM
Condition	Good Condition
Photo	See Photo
Spindle Power (30 min / Cont) Spindle Speed 20-10000 RPM Axis Travel 800 x 750 x 770 mm Rapid Traverse - 30000 mm/min ATC Tool Capacity - 129 Tools Tool change time 2.0 sec. Pallet Size 630mm x 630mm Max. Work piece size 950 Dia x 1000 mm Height

123

ID	MI8956
Make	HYUNDAI WIA
Model	HS800
YOM	2009
Condition	Good Condition
Photo	See Photo \| See Video
Pallet Size: 800 x 800mm T slot X axis: 1050mm Y axis: 875mm Z axis: 875mm Spindle Taper: No.50 Spindle revolution: 8000 rpm Spindle Dia:110mm Controller: Fanuc 18i-MB Height:1100mm Swing Width:1200mm

124

ID	MA36513
Make	Kiwa,Japan
Model	KH41
YOM	2008
Condition	Good Condition
Photo	See Photo
FANUC 21I-MB CNC CONTROL, XYZ TRAVELS: 18" X 18" X 13.7", 15 HP, 12.6" X 12.6" DUAL PALLET SYSTEM, 12,000 RPM SPINDLE, 60 ATC, BT-40 TAPER SPINDLE, TABLE SIZE: 47.2" X 23.6", HIGH SPEED LINEAR GUIDES, (2) CHICK TOMBSTONES,

125

ID	MI8831
Make	Nigata
Model	HN63C
YOM
Condition	Good Condition
Photo	See Photo
Pallet 630 by 630 (double) Side by side type. Heavy duty. Travel 1000 x 800 x 750 50 taper Fanuc 15M 1998 alfa drives Through coolant Running machine 60 atc Along with voltage step down, and stabilizer. All original books available

126

ID	MI8693
Make	BFW,India
Model	xtron544
YOM
Condition	Good Condition
Photo	See Photo
X500 Y400 Z400 BT40 8000 RPM MITSUBISHI M80 MODEL 2021 MACHINE WITH STEBILIZER AIR DRYER TOOLINGS ARM TYPE ATC

127

ID	MA36320
Make	Mazak,Japan
Model	FH6800
YOM	1996
Condition	Good Condition
Photo	See Photo
Hor. Machining centre with pallet changer & 80xATC Max size of the detail in work: 1,050 mm diameter Height 1,000 mm TABLE Length 630 mm Width 630 mm Maximum permissible weight 1,500 kg Height from the ground 1,250 mm CHARACTERISTICS OF THE AXES X axis travel 1,050 mm Y axis travel 800 mm Z axis travel 880 mm Distance from spindle nose to table center: Maximum 150-1.030 mm Distance from spindle center to table surface: Maximum 100-900 mm Fast feed X, Y, Z: 40 m / min Max. Feedrate in work X, Y, Z: 40 m / min X, Y, Z axis acceleration: 0.5 G SPINDLE Maximum speed 35 / 10,000 rpm ISO50 tool holder attachment cone Speed ranges 2 electronic ranges Power for 30 minutes of processing 37KW Power for continuous processing 30 KW Maximum torque 525 Nm Capacity Warehouse 80 seats BT50 tool holder cone Max tool diameter: 135/260 mm Maximum tool weight 30 kg Maximum tool length 500 mm Tool change time (chip-chip) 5 s Tool change time (Tool-Tool) 1.8 s ELECTRIC POWER REQUIRED For spindle 10,000 rpm In continuous 75.0 KVA For 30 minutes 85.0 KVA REQUIRED AIR FEEDING Pressure 5 kg / cm2 Capacity 550 lit / min DIMENSIONS OF THE STANDARD MACHINE Height 3.187 mm Width 6.363 mm Length 3,606 mm Weight 22.000 kg

128

ID	MI8641
Make	Makino
Model	MC86
YOM	1995
Condition	Good Condition
Photo	See Photo \| See Video
Fanuc OMC Table : 630x630mm Travel : X: 900mm Y: 630mm Z: 630mm B axis 1 deg index table 40 tool atc Spindle : taper - cat 50 RPM 6000

129

ID	MI8639
Make	Takisawa,Japan
Model	TC20
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck : 200mm Length : 250mm Mitsubishi e 70 with servo turret

130

ID	MI8638
Make	Takisawa,Japan
Model	TC-30
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck : 300mm Travel : 500mm Servo control ATC fanuc 21T Control

131

ID	MA36309
Make	Makino
Model	A92
YOM	2008
Condition	Good Condition
Photo	See Photo
- Number of axes : 4 MILLING SPINDLE - Tool holder type : HSK100 - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1520 / 1250 / 1350 [mm] - Rapid traverses rates (X/Y/Z) : 50.000 [mm/min] B ROTARY AXIS - Indexing precision : 1 [�] TOOL CHANGER - Auto. Tool Changer type : Loading arm - Tool magazine capacity : 60 PALLET CHANGER - Pallet size : 800 x 1000 [mm] - Pallets number : 2 - Maximum weight upon pallet : 2000 [kg] - Maximum workpiece diameter : 1500 x 1500 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5.000 x 3.450 [mm] - Machine height : 3.380 [mm] MACHINE HOURS - Number of hours under power : 69.356 [h] - Number of working hours : 29.595 [h] Equipment - CNC : MAKINO Professional 5 - 3 colors status lamp - Coolant tank * with high-pressure pump * Coolant through spindle - Chips conveyor - Workpiece probe : Renishaw - Tool breakage detection

132

ID	MI8632
Make	MAZAK
Model	FH1080
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Control fusion 640m Table 1000x1000 twin pallet X-axis : 1315mm Y-axis : 1099mm Z-axis : 998mm Pallet : 800 x 800mm pallet : 6 pallets ATC : 120 Tools. Spindle Taper : BT50 Spindle Speed: 7000rpm 4th Axis Indexing : 0.001 Max weight on pallet: 2200kgs with TSC/chip Conveyor/Meti

133

ID	MI8629
Make	Mori Seiki
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
HMC 400x 400 Lubricant Pump Motor: 0.017 kw Coolant pump Motor: 0.18KW x 2 Power source: 40(54) KVA pneumatic source: 0.5MPA 600NL/min (standard) Lubricant Tank Capacity:6L(sideways)2L+60L, Spindle lubrication & Oil Code 300L Machine Height: 2537mm (99.88") machine weight: 10,000Kgs

134

ID	MI8626
Make	Daewoo
Model	DHP-5000
YOM	2005
Condition	Good Condition
Photo	See Photo
Fanuc 18iM Table: 500 x 500mm Travels: X - 840mm Y - 690mm Z - 760mm B - 1� Degree indexing Spindle- CAT40 12000 RPM 60 Tool ATC Pallet changer

135

ID	MI8625
Make	Daewoo
Model	HM500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control - Fanuc 18iM PALLET 500X500MM BT50, X- 800.00 mm Y- 670.00mm Z- 670.00mm Swing - 850.00mm B axis - 1 degree Spindle RPM - 6000 Table 0.001 degree tools - 60 XYZ 800x800x800

136

ID	MI8624
Make	Mitsui Seiki
Model	HU50A
YOM	1999
Condition	Good Condition
Photo	See Photo
HMC( with through coolant spindle, chip conveyor and Transformer) Control: Fanuc 16-M Twin Pallets: 500 x 500 Table Traerse: 720mm (X) Vertical Stroke: 700mm(Y) Longitudinal Travel: 650mm (Z) Spindle Tapper: BT 50 Spindle Speed: 12000 RPM ATC-60

137

ID	MI8623
Make	BFW,India
Model	H 400E
YOM	2003
Condition	Good Condition
Photo	See Photo \| See Video
BFW - HMC Double pallet 400x400 size 360x1 index Control Fanuc Travel : 560/410/460 20 tools ATC with BT 40 size

138

ID	MI8622
Make	Mazak,Japan
Model	H630
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Travel X � 1000 mm Y - 800 mm Z � 750 mm Spindle taper- BT 50, ATC No.of tools- 120, Spindle speed-20- 4500rpm, Control-Fanuc OiMC POWERCENTER / 1986 Table Size: 630 mm x 630 mm No. of axis - 3 + pallet changer CNC Control System Retrofitted to New FANUC OiMC

139

ID	MA36292
Make	Cincinnati
Model	Magnum800
YOM	1997 built Retrofitted in 2008
Condition	Good Condition
Photo	See Photo
Control : Fanuc 18i-MB (retrofitted in ) Travels X � 1300 mm Y � 1100 mm Z � 1125 mm Table Size 800 x 800 mm x 2 plt Indexing 1/1000� Max. workpiece dia. 1300 mm Max. workpiece height 1150 mm Spindle speed 6500 rpm ATC 90 tools

140

ID	MI8621
Make	Quaser
Model	MK 60IIH
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Travel : X axis 710 X 1000MM Travel : Y axis 610mm Travel : Z axis 610mm Spindle center : 50-660mm Table : working surface : 500 x 500mm Table loading capacity : 500 kg Max Spindle speed : 10,000 min ATC ISO 40 [ BT - 40 ]

141

ID	MI8620
Make	Grob
Model	BZ500
YOM	2010
Condition	Good Condition
Photo	See Photo
Fanuc Series 18iM Pallet size 500/500mm Travel 630/630/500mm B axis Full (360K x .001) Spindle nose HSK-A63 Spindle speed 15,000rpm Coolant Thru 80 Bar Automatic Tool Changer 60 positions

142

ID	MI8619
Make	Japan
Model	H400
YOM	2002
Condition	Good Condition
Photo	See Photo
HMC 400x400 System : Fanuc 15m Stroke : 550x550

143

ID	MI8618
Make	Mori Seiki
Model	630
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table 630x630 Tool BT 50 ATC 65 Travel X 700. Y 700. Z 800 Spindle RPM 10000 Year 1994 Book available Control . MSC-516 Running Atc little problem

144

ID	MI8596
Make	Oerlikon
Model	HM 4 with Six Pallets
YOM
Condition	Good Condition
Photo	See Photo
Pallet size � 1250 x 1250mm X-Axis-1600mm, Y-Axis-1200mm & Z-Axis-1200 mm. Control � Siemens Sinumeric 828D Connected load � 50KW ATC Qty:110 Nos. Tool Holder Tapper : SK50

145

ID	MI8591
Make	Daewoo/ace
Model	ACE HM800
YOM
Condition	Good Condition
Photo	See Photo
Stroke : X axis : 1250(49.21) Y axis : 1000(39.37) Z axis : 1000(39.37) Rapid Traverse : X axis : m/min(ipm) 24(944.88) Y axis : m/min(ipm) 24(944.88) Z axis : m/min(ipm) 24(944.88) Max Feed Thrust force : X axis : kgf(ibf) 3,357(7400) Y axis : kgf(ibf) 6896(15,171) Cutting feedrate(mm/min(ipm): 1-12,000(0.04-475) ball Screw(xyz)mm/inch : dia50-P12(dia2.0-P0.47) Speed nose to Table centre : 200-1200 (7.87-47) Speed Centre to pallet Top : 75-1075(2.95 - 32.32)

146

ID	MI8590
Make	Daewoo/ace
Model	ACE H100
YOM
Condition	Good Condition
Photo	See Photo
Stroke X axis (Table Cross) : 200omm(78.7) Y axis (spindle Head vertical): 1120 (1250) Z axis (Column Longitudinal):1000(1250) Distance from spindle nose to table centre: 200-1200(200-1450) Distance from spindle centre to table top : 75-1195 (75-1325) Pallet Size: :1000 x 1000mm (39.8 x 39.8) Allowable Load Kgs:2000 Spindle Motor: (30min/cont) kw/hp 18.5/15 (20/25) 22/18.5 Spindle speed:(step-rpm): 20-4500(3) Spindle Nose taper: ISO NO.50 max Tool length: 600mm(23.6) max tool Dia:130 (5.1) Floor space : 6470 x 7500(254.7 x 295.3) Machine Height : 3580(37.10) machine weight: 27500 (kgs/lbs)

147

ID	MI8589
Make	Burkhardt&Webber
Model
YOM
Condition	Good Condition
Photo	See Photo
X-1350mm Y-800mm Z-1000mm RPM: 5000 B AXE: 0.001 CAT: 50 Box Gideway

148

ID	MI8588
Make	Mori Seiki
Model	SH50
YOM
Condition	Good Condition
Photo	See Photo
pallet

149

ID	MI8468
Make	Kitamura
Model	Mycenter H-400
YOM	1998/2003
Condition	Good Condition
Photo	See Photo
400x400 System :- Fanuc 15m

150

ID	MI8463
Make	Nigata
Model	HN50C
YOM	2000
Condition	Good Condition
Photo	See Photo
FANUC 21M TABLE: 500x500mm TRAVELS: X-800mm Y-700mm Z-550mm SPINDLE CAT50 6000 RPM GEARBOX SPINDLE THRU SPINDLE COOLANT AVAILABLE B AXIS- 360� DEGREE 60 TOOL ATC PALLET CHANGER WITH COOLANT TANK AND MOTOR

151

ID	MA36200
Make	MAZAK
Model	FH7800
YOM	2001
Condition	Good Condition
Photo	See Photo
X-Axis Travel: 41.3 Y-Axis Travel: 31.5 Z-Axis Travel: 34.6 Table Center to Spindle Nose: 5.9 � 40.5 Table Top to Spindle Nose: 3.9� 33 Spindle Taper: CAT-50 Spindle Speed: 15,000 RPM Max Tool Length: 19.7 Tool Changer Capacity: 330 ATC EQUIPPED WITH Mazatrol 640M CNC Control Mazak Tool Hive (6) 31.5 Pallets Full 4th Axis

152

ID	MA36121
Make	Makino
Model	MC65
YOM
Condition	Good Condition
Photo	See Photo
CNC FANUC SISTEM 11M With 10 pallets of 500 mm. each ones Complete of water power plant and chip conveyor

153

ID	MA36120
Make	Toshiba
Model	BMC40
YOM
Condition	Good Condition
Photo	See Photo
With spindle: ISO 40 Six pallets side: mm. 400 Magazine for 44 tools X = 500 Y = 450 Z = 450 Complete of central water power plant Tank Chip conveyor CNC TOSNUC 600 M

154

ID	MA36116
Make	Aciera
Model	CU250H
YOM
Condition	Good Condition
Photo	See Photo
Cone: ISO 40 2 pallets diameter: mm. 250 With frontal pallet changer Installed power: 15 KW Weight: Kg 3000 Magazine for 64 tools 48 spindles Chip conveyor CNC ACIERA 5000

155

ID	MA36114
Make	MAZAK
Model	H400B
YOM
Condition	Good Condition
Photo	See Photo
Cone: BT 50 Rpm: 50�7000 Six pallets: 400 x 400 CNC MAZATROL M 32 X= 560 Y= 460 Z= 510 Rapids XYZ: 24000 Number of magasin tools: 120 Weight: kg 7200

156

ID	MA36090
Make	Makino
Model	Hyper5
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
US Standard - Metric 3 axes Table Size - 749.30mm x 398.78mm Table Load Capacity - 149.66 kg X-Axis Travel - 599.44mm Y-Axis Travel - 398.78mm Z-Axis Travel - 398.78mm Spindle Speed - 3,000-32,000 RPM Spindle Nose - Direct Chucking Cutting Feedrate -1-266.70mm/sec Rapid Traverse Rate - 1-266.70mm/sec Automatic Tool Changer

157

ID	MA36089
Make	Toshiba
Model	BTD200QF
YOM	1999
Condition	Good Condition
Photo	See Photo
Travel：X/Y/Z/W 1000/1000/700/400mm B axies：0.001 degree ATC：60T Table size：1000x1000mm Table load：3000kg Spindle：3000rpm

158

ID	MA36062
Make	Deckel maho CNC
Model	DMC65H
YOM	2012
Condition	Good Condition
Photo	See Photo
duoBLOCK 12000 rpm, tool holder HSK-A 63, with 80-fold tool magazine, NC rotary table, with 2 pallets

159

ID	MI8387
Make	OKK,Japan
Model	HM40
YOM	2000
Condition	Good Condition
Photo	See Photo
CNC: FANUC 21 iMB Double Pallet: 400�400 mm X travel: 560 mm Y travel: 510 mm Z travel: 560 mm Spindle Speed: 10000 rpm Spindle Motor: 22 KW 60 Tools Magazine High Preassure trough Spindle Chip Conveyor

160

ID	MA35854
Make	Mori Seiki
Model	NHX5000
YOM	2012
Condition	Good Condition
Photo	See Photo
MORI SEIKI NHX5000 HSC Horizontal Machining Center Year of manufacture: 2012 Longitudinal travel X: 730 mm Transverse travel Y: 880 mm Vertical travel Z: 730 mm 4th axis rotary table 360� Rapid feeds: 60000 mm/min Spindle speed 20000 rpm Table surface: 2/500�500 mm Maximum table load: 500 Kg Distance table/spindle centre: 70-950 mm Toolholder taper HSK63 Tool magazine 40xHSK63 Main motor power: 37 kW Spindle power: 15 kW Tool cooling through the spindle Tool damage detection system Chip conveyor Filter KNOLL KF 110/FKA500 (2012) RENISHAW OMV

161

ID	MA35841
Make	Okuma,Japan
Model	MA50HB
YOM	1998
Condition	Good Condition
Photo	See Photo
CNC Control: OSP U100M Axes X-axis mm: 700 Y-axis mm: 800 Z-axis mm: 700 B-axis degree: 360 (0,001�) Pallet Number of pallets: 2 Dimensions mm: 500 x 500 Max. workpiece weight kg: 800 Spindle Spindle speed rpm: 6.000 Tool system Tape: ISO 50 Positions in magazine St.: 40 Equipment Internal cooling Chip conveyor

162

ID	MI8222
Make	Excello
Model
YOM	1972
Condition	Good Condition
Photo	See Photo
� Model: 732.Double end � Includes electrical panel & Hydraulics Accessories: � XLO DB 22 Spindle -1 no � XLO DB 24 Spindle -1 no � XLO 4x cluster spindle-1 no � Not in use but can be refurbished by any maintenance person. � Bed & spindles are in excellent condition. XLO fine boring machine Made in USA

163

ID	MA35727
Make	Makino
Model	A77-A90
YOM	1997
Condition	Good Condition
Photo	See Photo
machine has 244 magazine tool holders 10 tables 630 x 630 Y700 X600 Z800 1 pallet in machine and 1 outside machine control PROFESSIONAL 3 MAKINO ISO 50

164

ID	MA35726
Make	Makino
Model	A77-A244
YOM	1988
Condition	Good Condition
Photo	See Photo
machine has 244 magazine tool holders 10 tables 630 x 630 Y700 X600 Z800 1 pallet in machine and 1 outside machine control PROFESSIONAL 3 MAKINO ISO 50

165

ID	MI8194
Make	Karney & Trecker
Model
YOM
Condition	Good Condition
Photo	See Photo
Table: 48" x 72" Travel: X: 96" Y: 60" Z : 30" 25 HP 3600 RPM, 38 ATC K&T Gemini D CNC Control

166

ID	MI8193
Make	Hitachi Seiki
Model	HC500
YOM
Condition	Good Condition
Photo	See Photo
500 x500mm X 10 PALLETS , XYZ Movements: 710 x630 x560mm, 20-4000RPM, 240 ATC, BT/CAT 50, 1 degree rotation, FANUC 11M CNC, ( One Machines ). FANUC 11M CNC, ( One Machines ). . According to Machine Supplier Accuracy of the Machine is within 20 Microns Quantity: 2 nos

167

ID	MI8149
Make	Oerlikon
Model	HM 4 with Six Pallets
YOM
Condition	Good Condition
Photo	See Photo
Pallet size � 1250 x 1250mm X-Axis-1600mm, Y-Axis-1200mm & Z-Axis-1200 mm. Control � Siemens Sinumeric 828D Connected load � 50KW ATC Qty:110 Nos. Tool Holder Tapper : SK50 (DIN:69871/2079)

168

ID	MA35519
Make	Toyoda,Japan
Model	FA630
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC 15M CNC CONTROL 60 ATC 635 MM X 635 MM PALLETS CHIP CONVEYOR SPECIFICATIONS: X-AXIS TRAVEL:1000 MM Y AXIS TRAVEL:800 MM Z AXIS TRAVEL: 851 MM NUMBER OF PALLETS: 2 PALLET SIZE: 630 MM X 630 MM SPINDLE MOTOR: 40 HP / 22 KW SPINDLE SPEEDS: 6000 RPM SPINDLE TAPER: CAT 50 EQUIPPED WITH: FANUC 15M CNC CONTROL 60-POSITION AUTOMATIC TOOL CHANGER 2-STATION AUTOMATIC PALLET CHANGER CHIP CONVEYOR

169

ID	MA35494
Make	Toyoda,Japan
Model	FA1050
YOM	2001
Condition	Good Condition
Photo	See Photo
X-AXIS TRAVEL 63" Y-AXIS TRAVEL 55.1" Z-AXIS TRAVEL 45.2" PALLET SIZE 41.3" x 41.3" SPINDLE MOTOR 40 hp SPINDLE SPEED 10,000 RPM ATC CAPACITY 120 SPINDLE TAPER CAT-50 NUMBER OF PALLETS 2 Table Index 0.001 deg Max Workpiece Weight 72.8"(Dia) x 61.02"(H) Spindle Nose to Pallet Center 1.6"~ 55.1" Spindle Nose to Table Center 9.8" ~55.1" OPTIONS / EQUIPPED WITH FULL 4TH AXIS (0.001 DEG) FANUC 16I CONTROL NIKKEN B450FA 18" ROTARY TABLE (AGE: 2005) EQUIPPED WITH 4+1 MACHINING CAPABILITY UPGRADED 120 TOOL CHANGER COOLANT THRU THE SPINDLE (1000 PSI) NIKKEN B450FA 18" ROTARY TABLE CHIP CONVEYOR WITH COOLANT TANK

170

ID	MA35468
Make	Mazak,Japan
Model	FH6800
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Control MAZAYROL640M　 Table 630 ６ Pallet index０．００１　 ATC 120 station 10000 RPM

171

ID	MA35458
Make	Kitamura
Model	Mycenter H600B
YOM
Condition	Good Condition
Photo	See Photo
Control FANUC 11M X/Y/Z- 1016/813/765 Table 630x630 mm Load capacity 1200 kg Index resolution 5� Pallet station Distance table-spindle 20-833 mm Spindle taper NST 50 Spindle speed 20-3500 rpm Rapid Feed 12.000mm/min Cutting Feed 1-5.000mm/min ATC- number of tools 60 Max. Tool size/weight 150 mm/20 kg ATC- umber of tools 60 Spindle motor power 15 kW Machine Weight 14 t Quantity: 2 nos

172

ID	MA35447
Make	MAG
Model	NBH5
YOM	2013
Condition	Good Condition
Photo	See Photo
Control siemens 840 D Capacity workpiece contour max, 750mm x 700mm Pallet size 500mm x 500mm Load of pallet 500 kg approx Edge of table spindle nose in Y axis 85mm Rotary table indexing B, Axis 360 x 1 X, Axis traverse 700mm Y,Axis traverse 630mm Z, Axis traverse 700mm Speeds 15,000 rpm Feed rate range X,Y,Z, axis 1 - 50000 mm/min Rapid traverse rate X,Y,Z, axis 50 m/min Rapid traverse, rotary table 30 - 1/min Spindle taper HSK 63 Automatic tool changer Yes Number of tools 40 Max,Tool length 350mm Tool diameter 80mm - Max 150mm Tool weight 10 kg ATC time 2.5 - 4.5 seconds approx Input 400/3/50hz Fitted with High pressure thro spindle coolant Equipment Swarf conveyor, Rexroth filtration coolant system. Features Balluff chip tool ID Length 4400mm Width 3450mm Height 2800mm Nett weight actual. 13,850 Kgs. / 13.6 Tons.

173

ID	MA35445
Make	WMW Heckert ,Germany
Model	CW400
YOM	1983
Condition	Good Condition
Photo	See Photo
x-travel 650 mm y-travel 500 mm z-travel 650 mm weight of the machine ca. 13.000 kg dimensions of the machine ca. 4730 x 3252 x 2650 mm surface area 400 x 400 mm feeds -stepless- 30.000 mm/min rapid traverse 30 m/min number of pallets 8 change time of pallets 8 sec power capacity 35 /24 kW total power requirement 65 kW Rotary-table NC -Drehtisch max 25 U/min Tool changer 240 fach tool taper HSK 63 working spindle speed range 1..10000 U/min number of tools 100 St. Zubeh�r

174

ID	MA35409
Make	Mitsui Seiki
Model	HS6A
YOM	1995
Condition	Good Condition
Photo	See Photo
Controller : FANUC 15M Table size : 1000x1000mm；2 APC B axis：0.001 degree Travel : X/Y/Z 2400x1200x1000mm Spindle : 12000rpm；BT40 ATC：180T XYZ linear scales Simultaneous 4 axis control (XYZB)

175

ID	MA35361
Make	Doosan
Model	NHP4000
YOM	2017/ Installed 2019
Condition	Good Condition
Photo	See Photo
X:22" Y:25.2" Z:26" POWER:40 hp RPM:15,000 RPM # ATC:60 TAPER CAT 40 PALLET-W:15.75" PALLET-L:15.75" CONTROL:CNC (Fanuc 31i-B) DIMENSIONS 195" x 90" x 106" high WEIGHT 21,500 Lbs Fanuc cnc control with AICC II 200 block look ahead and optional additional 48 workpiece coordinates X,Y,Z Axis Rapid Traverse Rate 2,362 IPM Cutting Feed Rate 0.04 to 2,363 IPM CAT 40 Big Plus Spindle Pallet Indexing 1 Degree Allowable Table Load 880 lbs Maximum Part Diameter 24.8" Maximum Part Height 35.4" Double Arm ATC (60 tools Drum Type) AICC II 200 Block Look Ahead Coolant Through Spindle - 230 PSI Renishaw Tool Setter Renishaw tool setter included, machine is wired for tool probe (probe not included) Turbo chip conveyor MistBuster in photo and air line to pallet will be removed and are not going with the machine

176

ID	MA35319
Make	Daewoo
Model	DHM800
YOM	2004
Condition	Good Condition
Photo	See Photo
MACHINE SPECIFICATION X-AXIS TRAVEL 49.2" MAX TOOL LENGTH 21.7" MAX TOOL DIAMETER 5.3" / 9.8" PALLET LOAD CAPACITY 3520 LBS. PALLET CHANGE TIME 29 SECONDS TOOL CHANGE TIME 2.5 / 9.0 SECONDS (T/T/C-C) RAPID TRAVERSE RATES 945 IPM (X,Y,X) TOOL CAPACITY 90 ATC SPINDLE NOSE TO TABLE CENTER 7.9" - 47.2" SPINDLE CENTER TO TABLE TOP 3" - 42.3" SPINDLE TORQUE 1237 FT. LBS. SPINDLE MOTOR 30 HP SPINDLE TAPER CAT 50 SPINDLE SPEED 6000 RPM PALLET INDEX .001 DEGREES Z-AXIS TRAVEL 39.4" Y-AXIS TRAVEL 39.4" MAX TOOL WEIGHT 57 LBS. MACHINE EQUIPPED WITH 90 TOOL ATC MAGAZINE FOURTH AXIS COOLANT THRU SPINDLE (1000 PSI) TURBO CHIP CONVEYOR SPINDLE CHILLER UNIT REMOTE MANUAL PULSE GENERATOR THREE COLOR TOWER LIGHT PART PROBE

177

ID	MA35318
Make	Dahlih,Taiwan
Model	MCH630
YOM	2011
Condition	Good Condition
Photo	See Photo
Twin Pallet Table: Pallet dimensions 630 x 630 mm Pallet indexing 1� Maximum table load 1000 kgs Maximum workpiece dia 940 mm Maximum workpiece height 1050 mm Travels: Longitudinal travel X axis 1000 mm Vertical travel Y axis 800 mm Cross travel Z axis 800 mm Distance spindle end to table centre 160 � 960 mm Distance spindle centre to table surface 100 � 900 mm Spindle: Spindle taper BT50 Spindle speeds 60 to 6000 rpm Spindle speed range 2 gears variable Feeds: Cutting feed 1 � 8000 mm/min Rapid traverse 24 m/min Minimum input increment 0.001 mm Automatic Tool Changer: Tool storage capacity 60 Max tool size (dia x length) 110 x 400 mm Max tool weight 20 kg Tool selection random Motors: Spindle motor (rated output for 30 mins) 18.5 kW 25 Hp Drive motors X axis 4 kW 5.3 Hp Y axis 7 kW 7.3 Hp Z axis 4 kW 5.3 Hp Machine Space and Weight: Floorspace 4500 x 6230 mm Machine Weight 18000 kgs

178

ID	MA35281
Make	MAZAK
Model	H15MB
YOM
Condition	Good Condition
Photo	See Photo
X-axis travel: 910 mm Y-axis travel: 710 mm Z-axis travel: 830 mm B-axis travel: 360degrees Number of pallets 2 Pallet size: 630 x 630 mm Tool magazine 40 positions - SK 50 fastening Spindle power 17 kW Spindle speed 20-3600 rpm Machine dimensions 6.0x4.0x3.0 m Machine weight 12000 kg with internal cooling.

179

ID	MA35220
Make	Toyoda,Japan
Model	FA800
YOM
Condition	Good Condition
Photo	See Photo
X-Axis Travel: 1348.74mm Y-Axis Travel: 1148.08mm Z-Axis Travel: 1148.08mm Pallet Size: 800.10mm x 800.10mm Spindle Taper: CAT 50 Spindle Speed: 6,000 RPM Spindle Motor: 29.83 kw X, Y, Z-Axis Rapid Feedrates: 399.63 mm/sec EQUIPPED WITH: Fanuc 16i-MB CNC Control 1� B-Axis Indexing 60-Pocket Automatic Tool Changer Coolant Through Spindle Coolant Tank & Pump Chip Conveyor

180

ID	MA35158
Make	Mori Seiki
Model	NH5000/50
YOM	2005
Condition	Good Condition
Photo	See Photo
Pallet Size 19.7"x19.7" Max. Pallet Load 1,100 Pallet Indexing (B) 1 deg. X Travels 25.6" Y Travels 27.6" Z Travels 28.7" Rapid Traverse (X,Y,Z) 1,968 IPM Spindle Speed 8,000 RPM Spindle Motor 30 HP Spindle Taper CAT 50 ATC 60 Machine weight (approx.) 29,500 lbs. EQUIPPED WITH: 8K Spindle 60 Tool Magazine (CAT) 2-STATION TURN-TYPE APC 1 DEGREE Table IN-MACHINE WORK MEASURING SYSTEM (MAGAZINE) THROUGH-SPINDLE COOLANT

181

ID	MA35148
Make	Toyoda,Japan
Model	FA450II
YOM	1997
Condition	Good Condition
Photo	See Photo
Pallet Size: 17.72" x 17.72" (450 mm x 450 mm) X-Axis Travel: 23.6" Y-Axis Travel: 23.6" Z-Axis Travel: 23.6" B-Axis: 0.001 Degree Spindle Speed: 14,000 RPM Spindle Taper: BT 40 Automatic Tool Changer: 120 Tools Automatic Pallet Changer: 2 Positions Approx Machine Weight: 25,000 lbs Approx. Dimensions (l x w x h): 105" x 220" x 110" Equipped With: GE Fanuc Series 15-M CNC Control Full 4th Axis Indexing Through Spindle Coolant- 1,000 PSI 120 Position Automatic Tool Changer Turbo Chip Conveyor

182

ID	MI7888
Make	Daewoo
Model	ACE H100
YOM	1998
Condition	Good Condition
Photo	See Photo
Fanuc 18 M control Coolant tru spindle Renishaw probe infrared X 2000 mm Y 1200 mm Z 1200 mm B 1 degree indexing 2 x pallets 1000 x 1000 mm Max. Load 2.000 Kgf Spindle: Taper : BT50 Speeds : 4500 rpm Power : 18.5 kW ( AC) ATC Magazine Machine weight: approx. 28tons

183

ID	MA35040
Make	Niigata
Model	HN63D
YOM	2010
Condition	Good Condition
Photo	See Photo
X-Axis Travel: 1000.76mm Y-Axis Travel: 850.90mm Z-Axis Travel: 749.30mm B-Axis Indexing: .001� Pallet/Table Size: 629.92mm x 629.92mm (2) Table Capacity: 1201.78 kg Spindle Speed: 20 - 6000 RPM Spindle Taper: 50 Taper Spindle Motor: 18.64 kw EQUIPPED WITH: Fanuc 30i-MA CNC Control 90-Position Automatic Tool Changer Chip Blaster 70.30 kgs./sq.cm. Through Spindle Coolant Pump Tool Length Measurement Probe Chip Conveyor

184

ID	MA35032
Make	OKK
Model	HM630
YOM	2010
Condition	Good Condition
Photo	See Photo
Control :- Fanuc 31IS-A5 4 Axis machine Twin Pallet.

185

ID	MA35031
Make	OKK
Model	HM630
YOM	2011
Condition	Good Condition
Photo	See Photo
Control: Fanuc 31i- A5, 4 Axis machine, Twin Pallet.

186

ID	MA34982
Make	MAZAK
Model	HTC400
YOM
Condition	Good Condition
Photo	See Photo
PALLET SIZE (2) 15.70" X 15.70" X-AXIS TRAVEL 22" Y-AXIS TRAVEL 20" Z-AXIS TRAVEL 20" TABLE INDEXING 1 DEGREE SPINDLE MOTOR 15 HP SPINDLE SPEED 10,000 RPM SPINDLE TAPER CAT # 40 ATC 30 ATC MACHINE EQUIPPED WITH CHIP CONVEYOR

187

ID	MA34980
Make	MAZAK
Model	HTC400
YOM	1998
Condition	Good Condition
Photo	See Photo
MACHINE SPECIFICATION PALLET SIZE 15.75" X 15.75" PALLET INDEX 1 DEGREE PALLET LOAD CAPACITY 660 LBS SPINDLE TAPER CAT 40 SPINDLE SPEED 10,000 RPM SPINDLE MOTOR 15 HP AC TOOL CHANGER TYPE 30 ATC Z-AXIS TRAVEL 20.08" Y-AXIS TRAVEL 20.08" X-AXIS TRAVEL 22.05" RAPID ON (X,Y,Z) IPM 1181 IPM MACHINE EQUIPPED WITH CHIP CONVEYOR

188

ID	MA34979
Make	Kiwa,Japan
Model	KNH400
YOM	2004
Condition	Good Condition
Photo	See Photo
CONTROL Fanuc 18iMB PALLET SIZE 15.8" X 15.8" TOOL CHANGE TIME 1.2 SECONDS RAPID TRAVERSE 2,362 IPM B-AXIS (.001�INCREMENT) FULL 4TH Z-AXIS TRAVEL 26.18" Y-AXIS TRAVEL 24.02" X-AXIS TRAVEL 23.62" NUMBER OF TOOLS 64 MAX WEIGHT PER PALLET 881 LBS NUMBER OF PALLETS 2 SPINDLE TAPER 40 TAPER MACHINE EQUIPPED WITH HINGE BELT CHIP CONVEYOR WEEKLY TIMER SPINDLE CHILLER 12000 RPM (35 HP) BIG PLUS THROUGH SPINDLE COOLANT STANDARD WEIGHT (2 PALLET) 23100 POUNDS CHIP CONVEYOR STANDARD (LIFT TYPE) 10420 CUT TIME HR'S

189

ID	MA34972
Make	Ikegai,Japan
Model	AH-6
YOM
Condition	Good Condition
Photo	See Photo
Controller : FANUC 15-M Travel : X/Y/Z 850mm/800mm/700mm Table : 630 x 630 mm B axis : 0.001� Table Load：1000kg Spindle : 4500rpm ISO50 ATC : 60T 2 APC

190

ID	MA34962
Make	MAZAK
Model	FH880
YOM	1998
Condition	Good Condition
Photo	See Photo
X-axis Travel :- 51.5" Y-axis Travel :- 43.3" Z-axis Travel :- 39.3" Pallet Size :- 31.5" x 31.5" B-Axis Indexing : 1 Spindle Taper : 50 Spindle Speed : 7,000 RPM Spindle Motor : 40 HP Equipped With Mazak Mazateol M Plus CNC Controls 6-Station Automatic Pallet Changer 120-Station Automatic tool Changer Chip Conveyor High Pressure Coolant

191

ID	MA34958
Make	Dahlih,Taiwan
Model	MCH800
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Pallet dimensions 800 c 800 mm Max. table load 2000 kg X/Y/Z - 1350/1000/1000 mm Distance from spindle center to table surface 50-1050 mm Spindle taper BT 50 Spindle speeds 6000 rpm No. of stations in tool changer 60 Control: Fanuc 21i-MB

192

ID	MA34957
Make	Mazak,Japan
Model	FH6800
YOM	2005
Condition	Good Condition
Photo	See Photo
Pallet Change Time : 10 Seconds Pallet Load Capacity : 3307 lbs. Pallet Size : 24.8" (2) X-Axis : 41.34" Y-Axis : 35.43" Z-Axis : 38.58" Pallet Index : 1 Degree Spindle Speed : 10,000 RPM Spindle Taper : #50 Spindle Motor : 50 / 40 HP Spindle Center to Table Top : 3.93" - 39.37" Spindle Nose to Table Center : 3.93" - 42.52" Tools : 100 Rapid Traverse Rates (X, Y & Z) :2362 IPM Tool Change Time (T - T / C - C) : 2.2 / 4.2 Seconds Max Tool Diameter : 4.92" / 10.24" Max Tool Length : 24.8" Max Tool Weight : 44 lbs. Max Workpiece Dia / Height : 41.34" / 39.37" Machine Dimensions (L x W x H) : 287.2" x 131.9" x 134.7" Machine Weight : 39,000 Spindle Torque : 433 ft. lbs. Features: � MAZATROL FUSION 640M CNC CONTROL � 15" Color TFT � PC / MCIA Interface � USB Port � Fourth Axis Rotary Table � 100 Tool Magazine � Renishaw Laser Auto Tool Length Measurement (NC4) � Renishaw Touch Probe � Auto Tool Length Measurement � Tool Breakage Detection & Recovery � RFID Tool ID System � Through Spindle Coolant (300 PSI) � Mayfran Chip Conveyor � Workpiece Air Blast � Auto Pecking Cycle with Load Detection � Rigid Tapping � Helical Interpolation � Manufactured in December 2005

193

ID	MA34955
Make	Mazak,Japan
Model	FH6800
YOM	New 2004
Condition	Good Condition
Photo	See Photo \| See Video
4 axes Mazatrol Fusion 640 M, ATC 80. Cooling 70 Bar and air blow through spindle. With Renishaw and Maynard Chip Conveyor. 4 extra pallets. 2 Pallets 630 x 630 mm, 0,001� x 360.000� positions. X= 1.050 mm. Y= 900 mm. Z= 825 mm. Workpiece weight 1.500 kg. Distance table surface - spindle nose 100 � 900 mm. Distance table middle - spindle nose 150 - 1.030 mm. Spindle speed 1-10.000 rpm. Spindle motor power 37 kW. Spindle taper SK 50, ( ISO 50). Feed ( X/Y/Z) 40 m/min.

194

ID	MA34951
Make	Heller
Model	MC26
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
Siemens 840D cn type Race 800x800x800 Table 500x630 Maximum part dimension 900x1000mm Permissible weight center pallet 800kg 360 x 1 degree indexing Maximum spindle speed 204Nm Spindle power 64kW Tool magazine 60 Rapid feed 60,000 mm / min Characteristics: - High dynamic up to 1.2g and 90m / min. - Working capacity from 630 to 800. - Compact design, floor area <22m / 2. - Wide choice of equipment: tool magazine, pallets, watering . Machine dimension 6485x3050x3315 (mm) Machine weight 10,000 kg With 60 cones supplied with the machine

195

ID	MA34947
Make	Okuma,Japan
Model	M630VH
YOM	2004
Condition	Good Condition
Photo	See Photo
CNC Control: FANUC 15iM Simultaneously controllable axes X, Y, Z, B, A Axes X Axis mm: 1.020 Y Axis mm: 1.020 Z Axis mm: 1.020 A Axis degree: 150 (0.001�) B axis degree: 0.001� Pallet Number of pallets: 2 Dimensions mm: 630 x 630 Max. work piece weight kg: 1000 APC time sec: 20 Spindle Spindle speed rpm: 100 10.000 Spindle drive power kW: 18,5 / 22 Tool system Tool type: MAS BT50 Positions in magazine St.: 80 Max. tool diameter (with adjacent tools) mm: �125 Max. tool diameter (with adjacent tools) mm: �200 Max. tool length mm: 400 Max. tool weight kg: 20 Tool change time (tool to tool) sec.: 4 Tool change time (CUT to CUT) sec.: 8 Electronic handwheel Chip conveyor Internal cooling RENISHAW probe pre installation Power requirement kVA: 58 Basic machine dimensions / weight Length mm: 4.850 Width mm: 6.350 Height mm: 3.700 Weight kg: 22.000

196

ID	MA34915
Make	Huller Hille
Model	NBH170
YOM	2000
Condition	Good working condition
Photo	See Photo \| See Video
Control: Siemens Sinumerik 840C Working area X-axis mm 800 Y-axis mm 800 Z-axis mm 800 Workpiece-swivel range in working area diameter mm 900 Path measuring system - absolute scales - type directly with incremental scale Position uncertainty A according to ISO 2302 mm 0.007 Round table/pallet Clamping area pallet DIN 55201 , version 2, form A, mm x mm 500 x 630 Job load each pallet about kg 800 Rotary table division degree 360 x 1� Dividing accuracy seconds +/- 3� Pallet changer The nbh 170 has been equipped with a quick 180� swivel changer. Pallet change time 10 sec., independent loading and unloading and set-up of pallet. Working spindle Diameter in front bearing mm 100 Drive power 100% ED / 60% ED kW 37 / 46 Revolution area 1/min 25 - 6,000 or (25 - 10,000) or (25 - 12,000) Torque 100% ED / 60% ED max. Nm 900 / 1130 Standard tool taper according to DIN 69871 SK 50 Feed / Feed force / Rapid movement Feeding area X / Y / Z-axes mm/min 1 - 36000 Feeding force X / Y / Z-axes, 25% ED about N 25000 Rapid movement X / Y / Z�axes m/min 36 Rapid movement B-axis NC 1/min 30 Acceleration about m/s2 4 Tool magazine with 150 tool pockets Tool loading and unloading place nos. 1 Tool cassette max. nos. 5 Tool positions max. nos. 2 x 50 or (3 x 50 or 4 x 50 or 5 x 50) Tool diameter / max. tool diameter mm 125 / 325 Tool length max. mm 650 Tool weight max. kg 40 Magazine cassette additional load max. kg 650 Move speed of handling device m/min 160 Tool change time (tools up to 25 kg) about sec. 2.5 - 4.5 Chip-to-chip-time/ VDI 2852 (tool up to 25 kg) about sec 7 - 8 Tool monitoring / non operational time / administration of non operational time and tool life / feed force (Z- axis) and torque monitoring During machining tool breakage monitoring in tool magazine room Incl. 30 SK50 tool tapers Cooling unit About L. 1250 Output of coolant pump at 10 bar l/min 30 Pump output of rinsing unit at 1.0 bar I/min 60 Place requirement of basic machine L x W x H about m 8.0 x 3.5 x 3.5 Weight about kg 16,000 Measuring probe infra-red Renishaw Tool tapers 40

197

ID	MA34914
Make	DMG
Model	DMC80H
YOM	2006
Condition	Good working condition
Photo	See Photo \| See Video
Control: Siemens 840D powerline shopmill SlimLinePanel with 15"-TFT-Screen Wall tool magazine Omron Working area X-axis mm 800 Y-axis mm 800 Z-axis mm 800 max. workpiece height mm 1350 max. workpiece diameter mm 900 max. feed speed X / Y / Z mm/min 60,000 max. rapid movement X / Y / Z m/min 60 Machine weight kg 15,000 Tool changer Tool taper HSH 100 Tool magazine / Changer Type horizontal Nos. magazine pockets 300 Chip-to-chip time sec. 5 Incl. 30 tool tapers Main drive motor spindle Kit motor with gear (HSK100) Power (40 / 100% ED) kW 37 / 27 Max. torque (40 / 100% ED) Nm 1075 / 703 Max. spindle revolution min1 8000 Power (40/100% ED) kW 52/42 Max. torque (40 /100% ED) Nm 392 / 300 Tables NC-controlled round table with pallet carrier and two pallets (B-axis) Dimensions pallet mm 630 x 630 Max. job load kg 1200 Rapid movement min1 30 Horizontal machining centre NC-round table Automation / measurement / monitoring Measuring probe infra-red Renishaw Tool measurement in working room Blum-Laser Tool breakage monitoring Signal lamp 4-colour Tool taper 40 pcs Machine is by its build with flat tracks and its powerful drives capable to execute rough machining and fine machining up to a precision of IT6.

198

ID	MA34891
Make	Tongtai
Model	HG-800
YOM	2014
Condition	Good Condition
Photo	See Photo
Controller Fanuc 18i MB X/Y/Z Axis Travel 1,120 / 950 / 850 mm Pallet Size 800 x 800 mm Number of Pallet 2 Spindle Speed 3,600 RPM ATC 60 Tools Spindle Taper BT50

199

ID	MA34868
Make	Makino
Model	A51
YOM	2005
Condition	Good Condition
Photo	See Photo
Control : Makino Professional 3 Specifications X-Axis Travel :22" Rapid Traverse X/Y/Z :1969 IPM Number of Axes : 4 Max table Load : 881 LBS Pallet size 15.7" x 15.7" Spindle taper : CAT-40 ATC : 60 Spindle Speed : 12000 RPM Power : 33 HP Z-Axis Travel : 19.7" Y-AXis Travel : 22" Options / Equipped with. Chip Conveyor Chiller 2 Pallets Full 4th Axis 60 Station ATC

200

ID	MI7821
Make	OKK,Japan
Model	PCH600
YOM
Condition	Good Condition
Photo	See Photo
FANUC OM Speed spindle 4.500Tr-min 2 pallet 630mm x 630mm BT50 cones ATC 40 Travle X 800mm Y 800mm Z 700mm Axis B360 degrees

201

ID	MA34864
Make	Okuma,Japan
Model	MB-4000H
YOM	2011
Condition	Good Condition
Photo	See Photo
Quantity 2 machine's. Travels : X- 22.05" : Y-22.05" ; Z-24.61" pallet size : 15.75" x 15.75" Pallet Index: 0.001� Increments Spindle speed : up to 15000 RPM Spindle motor : 35/25 HP spindle taper : 40 Each equipped with Okuma OSP-P200MA CNC Control 110-position ATCs MP systems HP coolant system chip conveyor

202

ID	MA34858
Make	Mori Seiki
Model	SH50
YOM	1996/2000
Condition	Good Condition
Photo	See Photo
Pallet size: 19.7" x 19.7" Axis travel: X axis; 24.8" Y axis: 23.6" Z axis: 25.6" B axis: 360 deg, Max. workpiece swings dia: 28.7 Table surface to spindle center: 2.0"- 25.6 Table center to spindle: 5.9"-31.5" max. workpiece height : 26.8" max. table load : 2200 Lbs Table Indexing : 1 deg B-axis Time - 2.0 sec Rapid Traverse rate X,Y,Z Axes : 1260 IPM Spindle Speed Range : 12000 RPM Spindle Taper CAT#40 Spindle Motor 20 HP AC Auto tool change : 40 ATC Max Tool Length : 14.2" Max tool DIA .( ADJ.) : 5.9" Max tool Weight : 26.4" Tool change time ( tool to tool ) : 1.3 SEC Individual Machine Weight : 33000 LBS EQUIPPED WITH Fanuc msc 516 CNC Control 12000 RPM Spindle Floood coolant system rigid tapping each machine separate automatic tool changer Mori seiki horizontal machining center cell model SH503 ( MFG:2000 ) and SH503 ( MFG : 1996 ) cell consist of two machines & 12 pallet automated pool by INE or both with pallet system

203

ID	MA34856
Make	Daewoo
Model	ACE H100
YOM	2006/ Installed in 2007
Condition	Good Condition
Photo	See Photo
Control: Fanuc 18i-MB Condition: Excellent Power On 31,871 hours Operating Hours 20,821 Hours Cutting Hours 16,237 Hours Technical specifications (Subject to verification) Pallet size / number of pallets: (1,000 x 1,000 mm) 39.4"x39.4" / 2 plts. Table indexing: 1 Degree Index Table load capacity: 4,400 lbs. X-axis travel: 2,000 mm (78.7") Y-axis travel: 1,250 mm (49.2") Z-axis travel: 1,250 mm (49.2") Spindle nose: CAT-50 Spindle speed: 6,000 RPM High Speed Option Spindle motor: 35 HP Spindle nose to pallet center: 200-1450 mm (7.9" - 57.1") Spindle center to pallet surface: 2.9" - 52.2" Tool magazine capacity: 90 Position ATC Maximum tool length / weight: 23.6" / 55 lbs. Rapid traverse rates: 472 IPM Cutting feed rates: 197 IPM Equipped with 90 Station Tool Changer 1 Degree Pallet Indexing 2 Pallet Changer System Through Spindle Coolant Dual Internal Chip Augers Chip Conveyor - upright type Remote Jog Handle RS 232 Port Interface Rigid Tapping Renishaw TS27R tool setting probe/Fanuc Spindle Air Blast 230 PSI Through spindle coolant system Standard Coolant Tank with Pump CurrentlyDisassembled

204

ID	MA34854
Make	Okuma,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
CNC Control: FANUC 15iM Simultaneously controllable axes X, Y, Z, B, A Axes X-Axis mm: 1.020 Y-Axis mm: 1.020 Z-Axis mm: 1.020 A-Axis degree: 150 (0.001�) B-axis degree: 0.001� Pallets Number of pallets: 2 Dimensions mm: 630 x 630 Max. work piece weight kg: 1000 APC time sec: 20 Spindle Spindle speed rpm: 100-10.000 Spindle drive power kW: 18,5 / 22 Tool system Tool type: MAS-BT50 Positions in magazine St.: 80 Max. tool diameter (with adjacent tools) mm: �125 Max. tool diameter (with adjacent tools) mm: �200 Max. tool length mm: 400 Max. tool weight kg: 20 Tool change time (tool to tool) sec.: 4 Tool change time (CUT to CUT) sec.: 8 Equipment Electronic handwheel Chip conveyor Internal cooling RENISHAW probe pre-installation Power requirement kVA: 58 Basic machine dimensions / weight Length mm: 4.850 Width mm: 6.350 Height mm: 3.700 Weight kg: 22.000

205

ID	MA34853
Make	Doosan
Model	HM800
YOM	2012
Condition	Excellent
Photo	See Photo
Spindle: SK50 Big Plus with 3 gear steps X-axis: 1.250 mm Y-axis: 1.000 mm Z-axis: 1.000 mm B-axis: 0.001 rapid traverse X-, Y- and Z-axis: 24 m/min Rapid traverse B-axis: 10 m/min Number of available pallets: 6 pieces Pallet size: 800 x 800 mm Max. Pallet load: 1600 kg per pallet Number of tools in matrix tool magazine: 316 stations Internal coolant supply: 70 bar Equipped with: RENISHAW tool breakage control Glass scales HEIDENHAIN Incremental Full B axis. Control: FANUC 31i-MB Machine is with 6 pallets but can be run with only 2 pallets charger separately! 4 pallets are with Fastems station.

206

ID	MA34843
Make	MAZAK
Model	e800 V/5
YOM	2008
Condition	Very good condition
Photo	See Photo
Max. Machining Diameter : 28.7"/ 730 MM Max. Tool Leangth : 15.7" / 400 MM Max. tool Diameter w/Adjacent Tools : 5.9" / 150 MM ( pockets empty ) Max. tool Diameter : 3.7" / 95 MM Tool Capacity : 120 Tool ATC Spindle Taper : 40 Max. Torque : 724 NM Main Spindle Motor : 18.5 KW Milling Spindle Speed: 35 � 12,000 RPM Rapid Traverse Rate (X,Y,Z):50 m/min X-Axis Travel :24.8"/630 MM Y-Axis Travel :31.4"/800 MM Z-Axis Travel :35.4"/900 MM Max.Workpiece Height :39.3" /1000 MM Max. Tool Weight :26.5 Lb / 12 KG 2-Pallet Changer. Coolant System w/Filtration and Rear Discharge Chip Conveyor. Tool Eye ( Automatic ). AFC Function. EIA/ISO Function. Mazak Mazatrol Matrix CNC Control. Voice Advisor E-tower. Additional Workpiece Coordinates System : 300 Pieces. EIA/ISO Boring Cycles. LAN Interface. USB Interface. Active Vibration Control. Intelligent Thermal Sheild. Intelligent Safety Sheild. Mazak Voice Advisor. Virtual Process. Front Door Interlock. Machine Worklight. Manuals

207

ID	MA34813
Make	Mazak,Japan
Model	FH600X
YOM	1997
Condition	Good Condition
Photo	See Photo
Pallet Size: 24.8"x24.8" Table Load Capacity: 3,300 lbs. Table Indexing: 1 Degree Full 4th Maximum Part Size (D x H): 41.3" x 39.4" Max X-Axis Travel: 41.3" Max Y-Axis Travel: 31.5" Max Z-Axis Travel: 31.5" Spindle Motor 30 min. / Continuous 40 HP / 30 HP Max Spindle Torque: 453 ft./lbs. Max Spindle Speed: 35 - 15,000 RPM Spindle Taper: CAT #50 Distance From Spindle Nose to Pallet Center: 7.9" - 39.4" Tool Magazine Capacity: 80 Tool Positions Max. Tool Diam./Length/Weight: 10.2"/19.6"/66 lbs. Rapid Traverse Rates: 1260 IPM 6 Pallet Pallet Changer Mayfran 22" Chip Conveyor Coolant through spindle Royal Filtermist Collector Machine Footprint: 21' Long X 10'.5"W Palletech System Footprint: 25'L X 9'W 200 Volts 3Ph 165 Amps

208

ID	MA34807
Make	Starrag-Heckert
Model	HEC800-ATHLETIC
YOM	2009
Condition	Good Condition
Photo	See Photo
Travels X-Axis (headstock cross) 1.450 mm Y-Axis (headstock vertical) 1.300 mm Z-Axis (table longitudinal) 1.300 mm B-Axis (NC � rotary table) 360.000 � Max. work piece size (� x height) �1.750 x 1.400 mm NC � rotary table Pallet size 800 x 1.000 mm Threaded holes DIN55201 Smallest increment 0,001 � Reduced moment of inertia for payload 250 kgm2 Max. Table load in center 2.000 kg Feed, Rapid traverse Feed range in X-Y-Z axis 1 � 60.000 mm/min Feed force in X-Y-Z axis 100% ED 20 / 18 / 20 kN Rapid traverse rate in X-Y-Z axis 60 m/min Rapid traverse B axis (NC - rotary table) 60 m/min Main spindle Diameter in front bearing 100 mm Max. Power, ED 100/60% 37/45 kW Max. Torque, ED 100/60% 1.230/1.500 Nm Max. Speed 6.000 min-1 2 gear steps Tool holder HSK-A 100 DIN 69893 Coolant system Connection to central coolant supply system Cooling lubricant unit with backwash filter Low pressure circuit ca. 2,5 bar ca. 125 l/min Internal cooling through the spindle centre ca. 80 bar ca. 30 l/min Tool magazine, tool changer Tower magazine with 180 storage locations in 3 towers 15 memory locations for extra-long tools between 450 and 800mm realized in the storage. This reduces the total number of storage units by 15 to 165. Max. Tool � 110 mm Secondary pitch occupied Tool holder HSK-A 100 Tool � with restriction 250 mm Secondary pitch free Tool length max. 450 / 800 mm Tool weight max. 35 kg Max. Tool weight per tower 600 kg Chip-to-chip time up to 12kg / over 12kg ca. 5,0 / ca. 8,2 sec Pallet change time ca. 20 sec Machine Dimensions & Connection Data Space requirement ca. 8,2 x 6,0 x 4,6 m Machine weight ca. 31.000 kg Connected load 90 kW Supply fuse 160 A Operating frequency 50 Hz Operating voltage 400 V 3AC control FANUC Series 31i Model A5 Equipment, Accessories � 2-fold pallet changer without working space protection � 3 separate set-up stations with threaded hole pallets 800 x 1,000 mm � Tool magazine with 165 places HSK-A 100, own operating terminal on the magazine side, make SIEMENS � NC rotary table, increment 0.001 � Main spindle 6,000 min-1, 2 gear steps � 3D measuring probe make RENISHAW � Electronic handwheel � Machine enclosure with completely closed working area � Chip conveyor, ejection under floor � Coolant unit with filter and booster pumps, internal coolant feed (machine was connected to central coolant supply) � Exhaust mounted on the machine cover � Program running hours approx. 18,200 h

209

ID	MA34802
Make	OKK,Japan
Model	MCH-1000II
YOM	2011
Condition	Good Condition
Photo	See Photo
FANUC 0i-MD X/Y/Z 1600mm/1270mm/1020mm 1000 x 1000 mm sub-table:1200 x 1200 (2pcs) B axis : 1� Table Load:2000kg Spindle : 4500rpm ATC : 80T

210

ID	MA34791
Make	Makino
Model	MC108
YOM
Condition	Good Condition
Photo	See Photo
FANUC 15-MA 6-APC 1500X1500 with Index 1� and 120-ATC-CAT-50 4500-RPM X-1550 Y-1050 Z-1050

211

ID	MA34790
Make	Heckert
Model	HEC630Athletic
YOM	2007/17
Condition	Good Condition
Photo	See Photo \| See Video
CONTROLS Fanuc 31i - Pallet dimensions 630 x 630 mm - Table B-Achse 0,001x360000 - TRAVELS (x/y/z) 1200/950/1200 mm - rapid 60m/min - tools with refrig.thr.spindle//Werkzeugaufnahme SK50 Form A with inner cooling - Spindelumdrehungen/Spindle working rotation 20-6000 U/Min RPM - Spindel kW 26-43 - Balluff- Werkzeugindifikation (tool correction / tools identification) - Tools magazin 80 Tools Places - Tools anti-brake control system/Werkzeugbruchkontrolle - Knoll KSS System with vacuum rotation filter / Anlage mit Vakuumsrotationsfilter - band conveyor/Gliederbandf�rderer - weight of machine/Maschinengewicht ca. 25 t - 2 pallet rotating/ drehbar Option: - Fastems FPC 1500 /pallet system with/Palettenspeicher mit 10 Paletten You can use the machine as a two-pallett-system or put it with the 10-Pallett-Fastems.

212

ID	MA34692
Make	Mitsui Seiki
Model	FH630R
YOM	2006
Condition	Good Condition
Photo	See Photo
Controller : FANUC 31i Travel : X/Y/Z 1000mm/800mm/850mm Table : 630 x 630 mm B axis : 1� Table Load：1000kg Spindle : 6000rpm BT50 ATC : 120T 2 APC XYZ Linear scale CTS (spindle through coolant) chip conveyor

213

ID	MA34684
Make	Makino,Japan
Model	a81-5XR
YOM	2007
Condition	Good Condition
Photo	See Photo
Controller : Professional 5 Travel : X/Y/Z 730mm/730mm/800mm Table : 630 x 630 mm Table Load：1200kg Spindle : 10000rpm ATC : 40T

214

ID	MA34675
Make	Daewoo
Model	DHP630
YOM	2002
Condition	Good Condition
Photo	See Photo
Table size: (2) 24.8" X 24.8" X-Axis Travel: 39.44" Y-Axis Travel: 33.46" Z-Axis Travel: 33.46" Pallet Positioning: 1 degree Taper in spindle: 50 Tool Changer Positions: 60 Control Type: Fanuc 16iM Equipped With: Fanuc 16iM CNC Control, 60 Position Automatic Tool Changer, Flood Coolant, Complete Enclosure, Chip Conveyor, Coolant Filtration System, Auto Doors, Remote Jog Handle, Oil Temperature Controller

215

ID	MA34673
Make	Kitamura
Model	MyCenter HX630i
YOM	2007
Condition	Good Condition
Photo	See Photo
Control Type:Fanuc 16i-MB Axis: 4 Pallet Length:630mm Pallet Width:630mm Pallet Capacity:1,497 kg Pallet Indexing (B-Axis):0.001� X-Axis Travel:1,100mm Y-Axis Travel:919mm Z-Axis Travel:1,049mm Rapid Traverse Rate (X/Y/Z):2,362 ipm Spindle Taper:CAT 50 Spindle Speed:5,000 rpm Spindle Motor (HP):53 hp Tool Changer Capacity 50 Coolant Through Spindle:yes Machine Dimensions:5,766mm x 4,089mm x 3,531mm Machine Weight:20,952 kg EQUIPPED WITH: - Fanuc 16i-MB Control - Chip Conveyor - Coolant Tank & Pumps - Cooljet High Pressure Coolant Thru Spindle - Renishaw Probing

216

ID	MA34672
Make	Kitamura
Model	HX630I
YOM
Condition	Good Condition
Photo	See Photo
- 2 Step Geared Head - 2 Station APC - 50 Tool ATC Cat 50 - (1) Full Fourth Axis Pallet - (1) Full 5th Axis Pallet - Through Spindle Coolant - Base Wash Coolant Equipped w/ Fanuc 16iMB Control, Double Scraper Lift Up Chip Conveyor, Nano Software

217

ID	MI7757
Make	Mazak,Japan
Model	Ultra650
YOM	1995
Condition	Good Condition
Photo	See Photo \| See Video
(2) 25"X25" T-SLOT PALLETS, TRAVELS: X - 40", Y - 31.5", Z - 31", B (TABLE INDEXING) - 360 DEG. (IN 1 DEG. INTERVALS), SPINDLE SPEEDS TO 7000 RPM, CAT 50 SPINDLE TAPER, 120 STATION ATC, THROUGH-SPINDLE COOLANT, CHIP BLASTER HIGH PRESSURE COOLANT SYSTEM, WITH MAZITROL M-32 CNC CONTROL

218

ID	MA34670
Make	Mazak,Japan
Model	FH4000
YOM	2001
Condition	Good Condition
Photo	See Photo
Mazatrol PC-FUSION-CNC 640M Controller Max Spindle RPM 12,000 Max Z Travel 24.80 Max X Travel 22.05 Max Y Travel 20.08 40 Tool Magazine Thru Spindle Coolant

219

ID	MI7754
Make	OKK,Japan
Model	PCH600
YOM
Condition	Good Condition
Photo	See Photo
FANUC OM Speed spindle 4.500Tr-min 2 pallet 630mm x 630mm BT50 cones ATC 40 Travle X 800mm Y 800mm Z 700mm Axis B360 degrees

220

ID	MI7753
Make	Mazak,Japan
Model	FH6800
YOM	12/1999
Condition	Good Condition
Photo	See Photo
24.8 X 24.8 PALLETS (2) X,Y,Z = 41.3", 31.5", 34.7" MAX WORKPIECE HEIGHT: 39.4" MAX WORKPIECE DIAMETER: 41.2" FUSION 640M CONTROL WGT: 42,000LBS - SHIPS WITH TOOL CHANGER REMOVED

221

ID	MA34634
Make	WMW Heckert ,Germany
Model	CW1000
YOM
Condition	Good Condition
Photo	See Photo
CNC control N 600-3, table Size 1000 x 1000 mm, 2 PCs X / Y / Z 1350/1250/790 mm spindle Taper SK 50, 20 variable Speed - 4200 R / min , the diameter of the front bearing of the spindle 110 mm, flow 1 - 5000 mm / min , min-rapid traverse 15 m , a 60 - fold tool changer, chip conveyor, tools

222

ID	MI7732
Make	Makino
Model	MC65
YOM
Condition	Good Condition
Photo	See Photo
Fanuc 15M S:635560(100~660)510(200~710) T:500*500 ATC-60, APC-6 15~4000rpm BT50, 6 axis

223

ID	MA34626
Make	Mitsui Seiki
Model	HU50A
YOM
Condition	Good Condition
Photo	See Photo
CNC: Fanuc Table: n� 2 dim. 500x500 stroke: mm 720 x700 Z.650 AX B: 360.000�

224

ID	MA34625
Make	Mazak,Japan
Model	H630
YOM	1991
Condition	Good Condition
Photo	See Photo
Cnc: MAZATROL M 32 Pallets dimension:mm 630 X 630 n� pallets:n� 2 Stroke:mm 1.000 x 800 Z: 750 Power alimentation:380V- 50 Hz

225

ID	MA34562
Make	Mitsui Seiki
Model	HS5A
YOM	1986
Condition	Good Condition
Photo	See Photo
Fanuc11M Table 630�630mm　2PC　 Bt50　ATC-32 station

226

ID	MA34453
Make	Mazak,Japan
Model	FH680
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
Specifications: Pallet Size: 24.8" x 24.8" Travels: X-Axis: 41.3" Y-Axis: 31.5" Z-Axis: 31.5" Spindle Taper: CT 50 Spindle Motor: 40 HP Spindle Speed: 10,000 RPM Tool Change Capacity: 80 ATC Pallet Load Capacity: 2800 Lbs Equipped With: Mazak M Plus CNC Control Chip Conveyor Coolant QTY : 3

227

ID	MA34451
Make	Starrag-Heckert
Model	CWK500D
YOM	2001
Condition	Good Condition
Photo	See Photo
Pallet Size 500mm x 500mm Number of Pallets 2 Rotation on Pallets .0001 (360,000 deg.) Load Capacity 800kg Max. Rotation Speed 25 RPM Swing 800mm Travels: X-Axis 750mm Y-Axis 750mm Z-Axis 750mm Spindle Taper CAT#40 Spindle Speed 10,000 RPM Spindle Motor 43.6 HP Tool Changer 60 pos ATC Max. Feed Rate 1575 IPM Dimensions 5.64m x 6.35m x 3.34m H Approx. Weight 31,460 lbs (14,300 kg) Equipped With: * Fanuc 16i-M CNC Control * Full 4th Axis (360,000 Rotation) on table * Chip Conveyor * Thru Spindle Coolant * Flushing Shower Coolant * Spindle Chiller * Glass Scales * Renishaw Probe ***The machine needs cooling fan disk blade for the hydraulic unit. There is also a grease/lube fault and massive air leaks in multiple areas of the machine.

228

ID	MA34442
Make	Makino
Model	A55
YOM	1993
Condition	Good Condition
Photo	See Photo
Longitudinal Travel (X-Axis) : 22" Vertical Travel (Y-Axis) : 22" Spindle Travel (Z-Axis) : 23.8" Pallet Size : 15.75" x 15.75" Maximum Pallet Load : 1100 Lbs Number of Pallets : 2 Pallet Indexing : 1� Feed Rate (All Axes) : 3307 IPM Rapid Traverse (All Axes) : 3307 IPM Spindle Taper : CAT 40 Maximum Spindle Speed: 12,000 RPM EQUIPPED WITH: Fanuc O-MC CNC Control 40-Position Automatic Tool Changer Chip Conveyor

229

ID	MA34441
Make	Makino
Model	A99
YOM	Rebuilders 2019
Condition	Good Condition
Photo	See Photo
Pallet Size:31.5" x 31.5" Number of Pallets: 2 Max. Pallet Load: 3960 Lbs. X-Axis Travel:39.4" Y-Axis Travel:39.4" Z-Axis Travel:37.4" B-Axis: .001� Spindle Taper:CAT 50 Spindle Motor:40 HP Max. Tool Weight: 44 Lbs. Max. Tool Size:11.8"x19.7" EQUIPPED WITH: Fanuc 16i CNC Control Full 4th-Axis 120-Tool Automatic Tool Changer Automatic Pallet Changer Coolant Thru Spindle Chip Conveyor Approximate Overall Dimensions: 5715mm x 2794mm x 3302mm Approximate Weight: 22675 Kg

230

ID	MA34427
Make	Deckel Maho ,Germany
Model	DMC63H
YOM	2002
Condition	Good Condition
Photo	See Photo
Controller : Siemens Sinumerik : 840D powerline Pallet Size : 400 x 500 mm Pallet Indexing Angle : NC rotary table 360 � x 0.001 � Max Load : 350 Kg (1 Pallet) X/Y/Z Axis Travel : 630 / 630 / 560 mm Spindle Speed : 12,000 RPM Spindle Motor Power : 22.0 kw Spindle Taper : HSK-A63 ATC : 40 Accessories : Coolant tank, Coolant pump, Conveyor Machine Weight (Approx) : 15,000 Kg Machine Dimension (LxWxH) : 4450 x 3000 x 2420mm

231

ID	MI7665
Make	Huller Hille
Model	NBH450
YOM	2010
Condition	Good Condition
Photo	See Photo
WEIGHT: 12800 KG SPINDLE SPEED RANGE: 25-8000 Cantrol Siemens 840D X-AXIS MOVEMENT: 630 MM Y AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 550 MM Pallet Table Size 400 X 500 MM Total Pallet 8Nos

232

ID	MA34414
Make	Makino
Model	A55
YOM	1994
Condition	Good Condition
Photo	See Photo
X Axis: 22.05" Y Axis: 22.05" Z Axis: 22.05" Pallet Size: 15.75" x 15.75" Number of Pallets: 2 Max Table Load: 880 LBS Spindle Speed: 12,000 RPM Spindle Taper: #40 Motor: 30 HP ATC: 40 Machine Weight: Approx. 20,000 LBS Equipped With: Fanuc Professional 3 Control Chip Conveyor 12,000 RPM Spindle 40 Position Tool Changer

233

ID	MA34409
Make	Hurco
Model	HMX630
YOM	2011
Condition	Good Condition
Photo	See Photo
X-Axis: 41.3� Y-Axis: 35.4� Z-Axis: 39.4� B-Axis: 360� Rpm speed: 8000 Working surface(each pallet): 24.8�x24.8� Floor to pallet surface: 49.2� Spindle center to pallet surface min/max: 4.7�/40.2� Spindle Nose to Pallet Center min/max: 6.1�/45.5� Load capacity: 2200lbs 90 pocket tool changer Equipped with: Advanced verification graphic NC productivity package Industry standard nc Ultipockets Insert pockets Helical ramp Rigid tap Select surface finish quality Tool and material library Tool change optimization Chip conveyor

234

ID	MA34268
Make	Mazak,Japan
Model	FH5800
YOM	1998
Condition	Good Condition
Photo	See Photo
Control: Mazatrol 640M X travel: 710 mm Y travel: 660 mm Z travel: 610 mm No. of pallets: 6 Pallet dimensions: 500x500 mm Maximum weight on pallet: 500 Kg Number of tools: 80 Tool bore: Iso40 Spindle speed: 12000 Rpm Coolant: through spindle Accessories: about 60 cones + 1 cube Machine total weight: 14500 Kg

235

ID	MA34267
Make	Mazak,Japan
Model	FH5800
YOM	2001
Condition	Good Condition
Photo	See Photo
CNC Mazatrol fusion 640M Axis B:index Pallets dimension: mm 500 x 500 n� pallets::n� 2 Capacity loading pallet: kg. 500 n� of tools: n� 40 Stroke: mm 710 x 610 Z: 760 Rpm: 25.000 Tool bore: ISO 40 Power alimentation:380V- 50 Hz Rehisaw, chip evacuator, 15 bar cooling - indexed table 360,000

236

ID	MA34258
Make	OKK
Model	HM630
YOM	2008
Condition	Good Condition
Photo	See Photo
CNC Control: FANUC 310 is model A Axes X axis mm: 1050 Y axis mm: 900 Z axis mm: 900 B axis: 360,000 positions Max. rapid traverse speed m / min: 54 Pallet Number of pallets: 2 Dimensions mm: 630 x 630 Max. workpiece weight kg: 1300 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 25 Tool system Tool type: BT 50 Positions in magazine St.: 160 Equipment Internal cooling Chip conveyor Electronic handwheel

237

ID	MA34256
Make	Toyoda,Japan
Model	FA550
YOM	1998
Condition	Good Condition
Photo	See Photo
Control Type Fanuc 15M Pallet:21.65″ x 21.65″ Travels:29.52″ x 29.52″ x 23.62″ Spindle Speed:12,000 RPM Equipped With:40 ATC

238

ID	MA34253
Make	Haas
Model	EC1600
YOM	2004
Condition	Good Condition
Photo	See Photo
Table:64″ x 36″ Travels:64″ x 30″ x 32″ Spindle Speed: 6000 RPM Equipped With: 30 ATC 30″ Full 4th-Axis Rotary Hi-Pressure Coolant Thru Spindle Renishaw Probe Programmable Coolant Two Speed Gear Box Remote Jog Handle Dual Chip Augers

239

ID	MA34206
Make	MAZAK
Model	FH5800
YOM	2001
Condition	Good Condition
Photo	See Photo
Cnc:Mazatrol fusion 640M Axis B:index Pallets dimension:mm 500 x 500 n� pallets::n� 2 Capacity loadin palet:kg. 500 n� of tools:n� 40 Stroke:mm 710 x 610 Z: 760 Rpm: 25.000 Tool bore:Iso 40 Power alimentation:380V- 50 Hz

240

ID	MA34205
Make	MAZAK
Model	FF660
YOM	2000
Condition	Good Condition
Photo	See Photo
Cnc:FANUC 18 MB Axis B:index Pallets dimension:mm 500 x 500 n� pallets::n� 2 Capacity loadin palet : n� of tools: n� 25 Stroke:660 x 660 Z: 680 Rpm: 15.000 Tool bore:Iso 40 Power alimentation:380V- 50 Hz power motor:kw 15

241

ID	MA34204
Make	Quaser
Model	HX505AP
YOM	2010
Condition	Good Condition
Photo	See Photo
Cnc:FANUC 18 MB Pallets dimension:mm 500 x 500 n� pallets:n� 1 Capacity loadin palet:kg. 500 n� of tools:n� 30 Stroke: 762 x 640 Z: 840 rpm : 6.000 Tool bore: BT 50 Power alimentation:380V- 50 Hz Wheight:kg. 13.000 Hour work:n� 6.700 Years minifacture:2.010 dimension / size:mm 3.040 x 4.840 x 3.030

242

ID	MA34203
Make	DAENWOO
Model	ACE500-HP
YOM	2005
Condition	Good Condition
Photo	See Photo
Type:ACE 500 HP Cnc:FANUC Pallets dimension:mm 500 x 500 n� pallets:n� 10 n� of tools:n� 196 Stroke:850 x 700 Z: 750 Tool bore:BT 50 Power alimentation:380V- 50 Hz Weight:kg. 27.600 Hour work:n� 46.900

243

ID	MA34202
Make	Mitsui Seiki
Model	HU50A
YOM	1997
Condition	Good Condition
Photo	See Photo
Type:HU 50A Cnc:FANUC 16 M Pallets dimension:mm 500 x 500 n� pallets:n� 2 n� of tools:n� 60 Stroke: 700 x 700 Z: 650 Tool bore:BT 50 Power alimentation:380V- 50 Hz Wheight:kg. 12.000 Dimension- size:mm 4690 x2600 x 2930

244

ID	MA34201
Make	Matsura
Model	H.Plus-300
YOM	2002
Condition	Good Condition
Photo	See Photo
Cnc:Siemens 840 D Pallets dimension:300x 300 Stroke:500 x 500 x Z: 500 n� of pallets : n�11 Capacity load table:kg. Tool bore:BT 40 Spindle speed range:rpm 12.000 Power alimentation:380V- 50 Hz n� of tools:n� 240

245

ID	MA34178
Make	OKK
Model	HM50
YOM	1997
Condition	Very good condition
Photo	See Photo
CONTROL:FANUC 16M PALLET SIZE L: 500 mm W: 500 mm TRAVERSES (XYZ) X: 760 mm Y: 730 mm Z: 790 mm SPINDLE SPEED:UP TO 8,000 RPM SPINDLE TAPER:BT 50 ATC:110 stations, twin carousel FEED RATE:1 � 4,000 mm/min TOOL LENGTH:450 mm TOOL WEIGHT:20 kgs MACHINE DIMENSIONS:4600 x 3900 x 3200 mm PLUS HIGH PRESSURE THROUGH SPINDLE COOLANT FULL B AXIS MOTION ISO(BT) 50 SPINDLE TAPER ROTATING PALLET MOVEMENT LINEAR RAIL ON X and Y axes SWARF CONVEYOR TRANSFORMER FULLY ENCLOSED INTERLOCK GUARDING

246

ID	MA34155
Make	Makino,Japan
Model	A61-5XR
YOM	New in 2007
Condition	Good Condition
Photo	See Photo
Professional 5 T:500x500 2 APC S (XYZ) :730X650 X800 HSK -A63 20,000rpm ATC-60 Spindle Thru Coolant Chip Conveyor, tools ANS extra Pallet

247

ID	MI7564
Make	OKK,Japan
Model	PCH600
YOM
Condition	Good Condition
Photo	See Photo
FANUC OM Speed spindle 4.500Tr-min 2 pallet 600x600 BT50 cones ATC 40 Travle X 800mm Y 800mm Z 700mm Axis B360 degrees

248

ID	MI7563
Make	Makino
Model	A55
YOM
Condition	Good Condition
Photo	See Photo
Pallet Size : 400mm X 400mm Travels : 560mm X 560mm Atc : 128 Control : Fanuc (Professional 3)

249

ID	MI7511
Make	Mazak,Japan
Model	Mazatek H630
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Pallet size:630 x 630 mm, Machine was imported with Mazatrol control and now retrofitted with all new mitsubishi control M70. Machine is with BT50 Geared head spindle, 800 tools magazine, 6 pallets magazine, Travel X x Y x Z: 1000/800/750 mm,

250

ID	MI7504
Make	Kitamura
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
TABLE SIZE : 500mm x 500mm CONTROL : FANUC 15M

251

ID	MI7503
Make	CLOCK
Model	Mom
YOM	2002
Condition	Good Condition
Photo	See Photo
TABLE SIZE : 600mm x 600mm CONTROL : FANUC 16iM

252

ID	MI7483
Make	OKK
Model	HM40
YOM	2000/2003
Condition	Good Condition
Photo	See Photo \| See Video
X Axis : 650.0 mm Y Axis : 500.0 mm Z Axis: 550.0 mm Rapid-48 Control : Fanuc 16i-M Pallet Size: 400mm X 400mm Year : 2008 Tools Holder : 60 Nos Spindle Taper : BT 40 Spindle Rotation : 8000 rpm Spindle through coolant Weight : 9000 Kgs Repitability XYZ Axis-0.003 Spindle Runout-0.002

253

ID	MA34050
Make	Mazak,Japan
Model	FF510
YOM	1997
Condition	Good Condition
Photo	See Photo
Control : Fanuc SERIE 18i-M Axis X:510 mm Axis Y:510 mm Axis Z:510 mm Rotary table (4th axis) 1 deg. Table length:400 mm Table width:400 mm Max. part weight:250 kg ATC : 16 tools Tool Type : BT40 Max. spindle speed:15000 rpm Quantity: 2 nos

254

ID	MA33937
Make	Mazak,Japan
Model	HCN6000II
YOM	2008
Condition	Excellent
Photo	See Photo
20" x 20" PALLETS 31.5" X 31.5" Y 31.5" Z CAT 50, 10,000 RPM, 80 ATC FULL 4TH AXIS 1000 PSI COOLANT MATRIX CNC

255

ID	MA33936
Make	WMW Heckert ,Germany
Model	CWK800
YOM	1998
Condition	Good Condition
Photo	See Photo
Travel X / Y / Z: 1140 / 910 / 875 mm Pallet size: 1000 x 800 mm with CNC control Siemens 840D NC-turn table with path resolution 0.001� 2-fold Interchangeable pallet system Tool chain magazine with 80 tool places coolant unit, oil mist extraction

256

ID	MA33885
Make	Mori Seiki
Model	NH6300
YOM	2005
Condition	Good Condition
Photo	See Photo
MitsubishiM730UM X:Y:Z= 1050/900/1030 Table :630*630 8000RMP BT50 B -axis index optional

257

ID	MA33878
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1 off Kitamura Mycenter HX250 CNC Horizontal Machining Centre Year: 1999, Control: Yasnac i80M, X-Axis: 305mm, Y-Axis: 305mm, X-Axis: 330mm, Full B-Axis, Table: 254 x 254mm, Spindle speed: 12,000 rpm, Auto tool changer (ATC): 24, 1 off Kitamura Mycenter HX250 CNC Horizontal Machining Centre Year: 2000, Control: Yasnac i80M, X-Axis: 305mm, Y-Axis: 305mm, X-Axis: 330mm, Full B-Axis, Table: 254 x 254mm, Spindle speed: 12,000 rpm, Auto tool changer (ATC): 24, 1 off Kitamura Mycenter HX250i CNC Horizontal Machining Centre Year: 2001, Control: Yasnac i80MI, X-Axis: 305mm, Y-Axis: 305mm, X-Axis: 330mm, Full B-Axis, Table: 254 x 254mm, Spindle speed: 15,000 rpm, Auto tool changer (ATC): 40,

258

ID	MA33868
Make	Makino
Model	MC108H-A60
YOM	1992
Condition	Good Condition
Photo	See Photo
FANUC15-M BT50 ATC 60 pieces 800 square 2 pallet Spindle rotation speed 4000rpm Stroke X1050 Y810 Z810 Right-out tip conveyor tool Courante 5 degree index Installation dimensions (actual size): 6600 x 4500 x 3200 mm

259

ID	MA33867
Make	Mitsui Seiki
Model	HS5A
YOM	1990
Condition	Good Condition
Photo	See Photo
FANUC15-M BT50 ATC3 2 630 square 2 pallet Spindle speed 15000rpm Chip conveyor

260

ID	MI7384
Make	Ams
Model	MCH400
YOM
Condition	Good Condition
Photo	See Photo
WITH BT 40 GEARD HEAD SPINDLE NO.OF TOOL 45 PALLET CHANGER X =600 Y = 500 Z =500 B =1� CONTROLLER FANUC MAKE

261

ID	MA33842
Make	Mazak,Japan
Model	PFH5800
YOM	2006-2002
Condition	Good Condition
Photo	See Photo
Quantity:2 Mazatrol 640 M XYZ = 730/730/740 mm Spindle:15000 RPM 2 x Pallett 500 x 500 mm Table: B-Axis 360.000x0,0001 Power:22 kW (30 kW) Tool Changer:160 poss. (ISO 40) (optional) 20 Pos. The machine was bought as a 2 pallet machine and later integrated into a pallet system with a sister machine. One machine can be used with two pallets. Or you can use 2 machines with 20 pallets.

262

ID	MA33801
Make	Hitachi Seiki,Japan
Model	HG400III
YOM	2000
Condition	Good Condition
Photo	See Photo
Control: Seiki Secicos 16 M, B axis, Twin 400 mm pallets, With much tooling

263

ID	MA33797
Make	Starrag-Heckert
Model	CWK500D
YOM	2001/installed 2005
Condition	Good Condition
Photo	See Photo
GE Fanuc 16i-M Pallet Size 19.6" x 19.6" (500mm x 500mm) Number of Pallets 2 Rotation on Pallets .0001 (360,000 deg.) Load Capacity 1,760 lbs (800kg) Max. Rotation Speed 25 RPM Swing 31.5" Travels: X-Axis 29.53" Y-Axis 29.53" Z-Axis 29.53" Spindle Taper CAT#40 Spindle Speed 10,000 RPM Spindle Motor 43.6 HP Tool Changer 60 pos ATC Max. Feed Rate 1575 IPM Dimensions 5.64m x 6.35m x 3.34m H Approx. Weight 31,460 lbs (14,300 kg) Equipped With: * Fanuc 16i-M CNC Control * Full 4th Axis (360,000 Rotation) on table * Chip Conveyor * Thru Spindle Coolant * Flushing Shower Coolant * Spindle Chiller * Glass Scales * Renishaw Probe

264

ID	MA33450
Make	Fritz Werner
Model	TC500
YOM	1989
Condition	Good Condition
Photo	See Photo
Cnc : Siemens sinumerik Pallet : 500x500 mm Races X-Y-Z : 630 x 500 x 630 Tool holder : SK 45 Quantity : 2 Nos

265

ID	MA33419
Make	Matsuura
Model	H.Plus-300
YOM	2004
Condition	Good Condition
Photo	See Photo
Control unit: ATC Touch panel display Stroke X-Y: 500 x 500 mm Rapid: X-Y: 60 mt/min Spindle speed: 15000 rpm Slots in storage: n� 51 Type of tool older: BT 40 Spindle motor power: 7.5/15 KW Max tool diameter: 90-150 mm Max tool lenght: 300 mm Max tool weight: 8 KG Dimension width/Depth: 3720 x 2150 mm Machine weight: 8300 Kg

266

ID	MA33418
Make	Heller,German
Model	MCS-U300
YOM	1999
Condition	Good Condition
Photo	See Photo
Control unit: Sinumerik 840 D Spindle diameter: 110 mm New spindle installed in: 2018 Table dimensions: 630x800 mm n�2 Pallet: Indexing 360x1� Stroke X-Y-Z: 1000x800x1100 mm Workpiece X-Y: 1250x1200 mm Spindle speed: 4500 rpm Slots in storage: n� 120 Type of tool older: SK 50 Tool holder: Plus 120 pieces Max tool diameter: 100/270 mm Internal cooling: max 50 Bar Renishaw probe: Yes Set-up pallets: 9 PIECES Chip conveyor: YES Power consumption: 68 KVA Weight: 23500 Kg Regular service and mantained

267

ID	MA33259
Make	Mori Seiki
Model	NH5000
YOM	2002
Condition	Good Condition
Photo	See Photo
X-Axis Travel : 629.92mm Y-Axis Travel : 599.44mm Z-Axis Travel : 670.56mm Number of Pallets : 2 Pallet Size : 500.38mm x 500.38mm Table Load Capacity : 1100 Lb. Pallet Indexing (B-Axis) : 1� Max Workpiece Swing Diameter : 728.98mm Distance from Table Surface to Spindle Center : 50.80mm - 650.24mm Max Workpiece Height : 899.16mm Spindle Taper : #40 Max. Spindle Speed : 14,000 RPM Max. Tool Weight : 17.6 Lb. Max. Tool Length : 180.34mm Hours as of 9-11-2019 Power On : 86,340 Cutting : 37,165 Free Purpose : 45,359 EQUIPPED WITH: Mori Seiki MSG-501 CNC Control 120-Pocket Automatic Tool Changer Chip Conveyor Mist Buster Transformer

268

ID	MI7210
Make	Yasda
Model	YMB90N
YOM
Condition	Good Condition
Photo	See Photo
1 Spindle motor (A.C. motor) KW 18.5 2 Spindle revolution RPM 40 ~ 3200 3 Spindle speed change(gear 2- stage speede change) S S4 DIRECT COMMAND 4 Spindle diameter MM 110 5 Tool holding device Taper Shank - Pullstud system 6 Tool type BT BT 50 7 X-axis travel distance MM 900 8 Y-axis travel distance MM 800 9 Z-axis travel distance MM 700 10 Pallet Size MM 750 x 630 11 Table workable area MM 750 x 630 12 Table indexing angle � (BI x DIRECTION) 1� 13 Min. dist. Between spindle center line &the table surface MM 0mm 14 Min. dist. Between table center & the spindle nose end MM 200mm 15 Positning speed M/MIN (12m/min. Y-AXIS ONLY) 10m/min. 16 Weight of machine KG 15000

269

ID	MA33076
Make	Kitamura
Model	Mycenter HX250G
YOM	2013
Condition	Good working condition
Photo	See Photo
� Control Arumatic Mi Control � Number of palettes 2 pcs � Table size 254 x 254 mm � Table load 100 kg / palette � Max size of wpc. D350 x 400 mm � X travel 305 mm � Y travel 305 mm � Z travel 330 mm � B axis 0,001 - 360 degree � Distance from table surface to spindle center 60 - 365 mm � Distance from table center to spindle nose 60 - 390 mm � Toolholder HSK40E � Spindle speed 150 - 30000 rpm � Driving system Directdrive � Torque 47,7 Nm � Feedrate X/Y/Z 0 - 48000 mm/min � B axis 12000 degree/min � Rapid feed X/Y/Z 60 m/min � B axis 18000 degree/min � APC change time 7,9 sec. � ATC capacity 40-fold (Random type) � Max tool size D50 x 200 mm � Max tool size D75 x 200 mm (adjacent tool pot empty) � Max tool weight 2 kgs � Spindle power AC 7,5/11 kW � Power required 30 kVA � Machine size LxWxH 2311 x 2939 x 2207 mm � Place required ca 3300 x 3940 mm � Weight ca 5500 kgs Standard accessories � Working lamp � Towel lamp � Oil cooler � Coolant unit � Aut. lubrication system Extra accessories are with the machine free of charge � Pokolm 2508 E 40 tool holders �� 3 pcs � Thermogrip HSK-E40/TSF 600 schrink tool holders ��. 2 pcs � Aluminium triangle Parotec with Power Grip clamping ssystem �. 2 pcs � Aluminium clamping plate 305x315x35 mm with Parotec Power Grip clamping system ��. 2 pcs � Palett mounting kit Parotec PowwerGrip + Festo air tap ��. 1 pc � Kitamura Oil Air Lubrikant 1 L�� 2 pcs � Parotec PowwerGrip nut for fixture plate��.13 pcs � New fixing brackets and machine preparation by KITAMURA service representative and also condition declaration by them

270

ID	MA33068
Make	Haas
Model	EC1600YZT
YOM	2012
Condition	Good Condition
Photo	See Photo
Table Size: 64" x 36" Table Load Capacity: 10,000 Lbs X-Axis Travel: 64" Y-Axis Travel: 50" Z-Axis Travel:40" Spindle Nose CAT #50 - 2 Speed Geared Spindle Speed: 6,000 RPM Spindle Motor 30 Min. / Cont. 30 HP Number of Tool Positions 30 + 1 Station Tool Changer Maximum Tool Diameter/Length/Weight 10" / 20" / 30 lbs. Tool Change Time 10.3 seconds Rapid Traverse Rates (X,Y/Z) 540 IPM Cutting Feedrates: 500 IPM Machine Weight:35,500 Lbs Equiped with Haas HRT450 Table w/ 7.5" Thru Hole 16" 3 Jaw Scroll Chuck w/ 8.625" Bore Manual 11.5" Center Height Tailstock Haas Wireless Intuitive Programming System -includes both part and tool probing 1000 PSI High Pressure Coolant Thru Spindle 5th Axis Drive & Wiring -Brushless .001 Degree Full 4th Axis Table-Brushless 1 MB Program Memory 15" Color LCD Monitor USB Port Interface Programmable Coolant Nozzle Rigid Tapping High Speed Machining with Lookahead Haas Intuitive Programming System User Definable Macros Spindle Orientation Coordinate Rotation & Scaling Early Power Failure Detection Module Color Remote Jog Handle Chip Augers Auxilliary Coolant Filter System 2 Speed Geared Headstock

271

ID	MA32943
Make	Starrag-Heckert
Model	CWK500D
YOM	2013
Condition	Good Condition
Photo	See Photo
x-travel 750 mm y-travel 650 mm z-travel 700 mm control Sinumerik 840 D Siemens work table table surface area 500 x 630 mm max. table load 500 kg boring diameter 20 H6 mm hole in table 50 H6 mm T-slots 14 (DIN 650) numbers of pallets 2 change time of pallets 9 sec b-axis (table) 0,001 � Max. rpm 25 U/min feed Fast feed speed 40 m/min Main spindle turning speed range - main spindle 50 - 10.000 U/min power capacity - main spindel 31 / 19 kW tool taper HSK - A63 max. Torque 200 / 165 Nm tool magazin toolpiece magazine: chain magazine 120 pos. max. tool diameter 85 mm max. tool-dia with free toolbox 160 mm max. tool length 400 mm max. tool weight 10 kg change-time chip to chip 6 sec total power requirement 35 kW weight of the machine ca. 13 t dimensions of the machine ca. 5,5 x 4,8 x 3,0 m Accessories Documents Chip conveyor Coolant system high pressure coolant 30 / 50 bar through spindle coolant oil mist extraction paper band filter B-axis 0,001 � spindle oil cooler tool holders 2

272

ID	MA32880
Make	Makino,Japan
Model	a81M-5X
YOM	2013
Condition	Excellent
Photo	See Photo
X:900 Y:800 Z:1020 B:360/-60 Deg C:150 Deg 2 APC Table :630*630 20-8000 rpm BBT50 double binder ATC:40

273

ID	MA32879
Make	Makino
Model
YOM	2013
Condition	Good Condition
Photo	See Photo
Model : a81M-5XR X:900 Y:800 Z:1020mm B:360/-60 Deg C:150 Deg 2APC Table :630x630mm 20-8000rpm BBT50 double binder ATC:40

274

ID	MA32850
Make	Yamazaki,Japan
Model	FH-8800
YOM	2004
Condition	Good Condition
Photo	See Photo
Internal management number: 00419 NC: MAZATROL640M T: 800 mm x 800 mm Maximum workpiece height: 1250 mm X, Y, Z axis travel: 1300 mm x 1100 mm x 1000 mm B-axis indexing: 1 � Spindle speed: 7,000 rpm Tool: BT50 ATC: 80

275

ID	MA32802
Make	Huller Hille
Model	NB-H170Speed
YOM	2004
Condition	Good Condition
Photo	See Photo
NC � rotary table Pallet size: 630 x 500 mm 2-fold pallet changer Smallest partial step: 0,001� Maximum workpiece circuit: � 900 x 1.100 mm Max. table load centric: 800 kg Max. feed rate: 30 Upm travels X-axis (rotary table cross): 1.000 mm Y-axis (head stock vertical): 800 mm Z-axis (column longitudinal): 800 mm B-axis (NC � rotary table):360.000� Feeds Feed range in X-Y-Z-axis: 1 � 50.000 mm/min Feed force in X-Y-Z-axis 100% ED: 15.000 N rapid feed in X-Y-Z-axis: 50 m/min rapid feed B-axis (NC � rotary table): 30 m/min Tool magazine, Tool changer Number of magazine cassettes: 3 Number of tool places each cassette: 50 150 places in total Max. tool-�: 100 mm Tool taper: HSK 100 Tool-� with limitations: 125/325 mm Tool length max.: 650 mm Tool weight max.: 40 kg Max. weight each magazine cassett: 650 kg Tool changing time (max. 25 kg):ca. 2,5 � 4,5 sec Chip to chip time (VDI 2852, Bl. 1): ca. 7-8 sec Pallet change time: ca. 12 - 18 sec Main spindle Max. power, ED 100/40%: 36/50 kW Max. torque, ED 100/40%: 344/475 Nm Max. speed: 12.000 min-1 Tool taper: HSK 100 Coolant equipment Tank capacity: ca. 1.250 l External coolant: ca. 30 l/min at 11 bar Internal coolant: ca. 10 l/min at 25 + 50 bar Flushing pump device: ca. 160 l/min at 1,0 bar Flushing pump channel flushing: ca. 60 l/min at 1,7 bar Chip conveyor � ejection height; 1.200 mm measurement Space requirement: ca. 7,8 x 6,1 x 3,4 m Machine weight: 27.000 kg equipment  2-fold pallet changer with in total 4 piece pallets 630 x 500 mm (2 pallets extra)  Tool magazine with 150 places HSK 100  NC-rotary table pitch 0,001�  Main spindle 12.000 min-1/36 kW  3D-measuring probe RENISHAW OMP 60  Machine cover with fully enclosed working area  2 St. chip conveyors longitudinal  Coolant equipment with paper band filter, internal coolant  BRANKAMP tool monitoring  exhaust ELBARON  Power ON: 34.000 h, Machine run: 21.600 h Control: Sinumerik 840D

276

ID	MA32801
Make	Makino,Japan
Model	A71
YOM	2004
Condition	Good Condition
Photo	See Photo
General Specifications Pallet 19.7" x 19.7" X Axis 28.7" Y Axis 28.7" Z Axis 31.5" 2 Speed Range Spindle 10,000 RPM Rapid Traverse 1,968 in/min Max. Work Piece 31.5" x 39.4" Max. Payload 1,540 Lbs. ATC Capacity 60 Spindle Taper 50 Tool to Tool 1.7 Seconds Chip to Chip 3.2 Seconds Max. Tool Length 17.72" Max. Tool Diameter 11.81" Max. Tool Weight 44 Lbs. MOTOR SPECIFICATIONS: Main Spindle Motor 30Kw Equipped With Makino Pro 3 CNC Control (Fanuc) Full 4th Axis Rotary Table Thru Spindle Coolant System Hydraulic Unit, Chiller 60 Position Tool Changer Chip Conveyor

277

ID	MI7158
Make	Makino
Model	MCB1210A120
YOM	1997
Condition	Good Condition
Photo	See Photo
Pallet size : 800 x 800mm Traverses XYZ : 1,250 x 1,050 x 810mm Spindle RPM : 15,000 rpm Guide ways Type : Box Spindle Taper : BT50 Control : Fanuc 16-M (Professional 3) Tool Change Capacity : 120 Capacity : 3,000 Kgs High Speed Spindle, TSC (Through Spindle Coolant), Linear Scales

278

ID	MI7157
Make	Dahlih,Taiwan
Model	MCH800
YOM	2007
Condition	Good Condition
Photo	See Photo
travels : 1350�1000�1000 mm, Pallet size 980�980mm, ATC 60 tools (spindle CAT 50) Control FANUC 18iM

279

ID	MI7156
Make	Toshiba
Model	BMC80
YOM
Condition	Good Condition
Photo	See Photo
THOSHIBA BMW 80,RETROVATED ON 2006.X 1600,Y 1200, Z 1200 TWINPALLET 800MM ,60TOOLCHANGER,BT50

280

ID	MA32785
Make	Toshiba
Model	BMC63E
YOM
Condition	Good Condition
Photo	See Photo
Control: TOSNUC 800 X axis: 1000 mm Y axis: 800 mm Z axis: 850 mm B axis: 360� Table: 630 x 630 mm, max. 1200 kg Tool taper: ISO50 Spindle speed 15-5000 rpm ATC 60 Dimensions: 5400 x 3600 x 2900 mm Weight: 17,5 t Pallet changer, cooling system, documentation

281

ID	MA32646
Make	Makino,Japan
Model	A71
YOM	2008
Condition	Good Condition
Photo	See Photo
PALLET SIZE ... 19.75" X 19.75" NUMBER OF PALLETS .. 2 PALLET CHANGE TIME ... 6 SECONDS PALLET INDEXING ... 360,000 FULL 4TH X-AXIS TRAVEL ... 28.7" Y-AXIS TRAVEL ... 28.7" Z-AXIS TRAVEL ... 31.5" RAPID TRAVERSE RATE .. 1969 IPM SPINDLE TAPER ... CAT-50 SPINDLE SPEEDS ... 10,000 RPM SPINDLE DRIVE MOTOR .. 47 HP MATRIX AUTOMATIC TOOL CHANGER . 137 TOOLS CAPACITY AUTOMATIC TOOL CHANGER TYPE .. DUAL ARM TOOL CHANGER TIME .. 1.7 SECONDS MAX. TOOL LENGTH ... 17.72" MAX. TOOL DIAMETER ... 4.72" MAX. TOOL WEIGHT ... 44.4 LBS MACHINE WEIGHT ... 38,274 LBS EQUIPPED WITH: * PROFESSIONAL 5 PC BASE 300 SERIES * MANUAL PULSE GENERATOR ETHERNET * RS-232 PORT * * THROUGH SPINDLE COOLANT * 1000 PSI CHIP BLASTER SHOWER COOLANT, FLUSH COOLANT * RENISHAW MP700 PROBE * AUTOMATIC MEASURING SYSTEM * MAYFRAN CONCEP 2000 LIFT UP CHIP CONVEYOR * HELICAL INTERPOLATION * SPINDLE CHILLER * AIR DRYER * TRANSFORMER *** UNDER 5,000 CUTTING HOURS UNDER POWER

282

ID	MI7084
Make	Heller
Model	MC16
YOM	2004
Condition	Good Condition
Photo	See Photo
Pallet Size - 500 X 400mm (2 Pallets) X - 630mm Y - 630mm Z - 630mm Spindle Taper - HSK 63 ATC - 40 ATC RPM - 8000 Controller - Siemens Sinumerik 840D

283

ID	MA32343
Make	Hyundai-Kia
Model	H63
YOM	2005
Condition	Good Condition
Photo	See Photo
Pallet Size 24.8" (2) Travel: X-Axis 37.4" Y-Axis 32.5" Z-Axis 29.9" Pallet Index 1 Degree Spindle Speed 80 - 8000 RPM Spindle Motor 30 / 25 HP Spindle Taper Cat 50 Spindle Center to Table Top 0 - 32.5" Spindle Nose to Table Center 6.9" - 36.8" Tools 60 Rapid Traverse Rates 787 IPM Pallet Load Capacity 1000 lbs. Max Tool Diameter 4.3" Max Tool Length 23.6" Max Tool Weight 44 lbs. Machine Dimensions (L x W) 187.8" x 124.8" Machine Weight 30,800 lbs. Equipped With Fanuc 18IMB CNC Control 10.4" Color LCD Coolant Thru Spindle (1000 psi CoolJet) Rigid Tapping 60 Tool Magazine Chip Conveyor (Left Front Exit) Yellow Operation End Light Remote Manual Pulse Generator Two Gear Range Headstock Heavy Duty Box Way Construction

284

ID	MA32292
Make	Mitsui Seiki
Model	HU50A Twin Pallet HMC
YOM	2000
Condition	Good Condition
Photo	See Photo
CONTROL:FANUC 15M PALLET SIZE: L: 500 mm W: 500 mm TRAVERSES (XYZ) X: 720.1 mm Y: 849.9 mm Z: 849.9 mm SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: BT 40 ATC: 120 STATIONS PLUS: FULL B AXIS THROUGH SPINDLE COOLANT TOOL PROBING CHIP AUGER/CONVEYOR

285

ID	MA32291
Make	Okuma,Japan
Model	MA-500HB
YOM	2006/ Installed 2007
Condition	Good Condition
Photo	See Photo
Control:OSP-P200M Pallet size:500x500mm Twin pallet Pallet indexing:Full B-axis Travel XYZ:700x900x780mm Spindle taper:BT50 Max.spindle speed:12000rpm Toolchanger: 100 atc High pressure coolant:70bar It can be currently viewed under power in a local Belgian facility Working hours as of 2018: Power ON 44702 hours Power NC 28316 hours Spindle 17651 hours Cutting 14178 hours

286

ID	MI7068
Make	MAZAK
Model	H630
YOM	1989
Condition	Good Condition
Photo	See Photo \| See Video
Table Size : 630mm x 630mm No. of axis - 3 + Pallet changer CNC Control System Retrofitted to New Fanuc OIMC in Year 2000 Spindle taper - BT 50, ATC No. of tools- 120, Spindle speed : 20 - 4500rpm, Control-Fanuc OiMC

287

ID	MA32068
Make	Starrag-Heckert
Model	CWK400D
YOM	2003
Condition	Excellent condition,under power
Photo	See Photo
x-travel:650 mm y-travel: 650 mm z-travel: 650 mm Number of pallets: 2 way size of pallet: 400 x 400 mm Collision free rotation dia/max. job dia: 700 mm Maximum job height: 750 mm feeds: 82000 mm/min rapid traverse: 82000 mm/min spindle taper: HSK-A63 spindle motor: 31 kW spindle turning speed range: 10000 U/min Tool magazine positions: 60 fach distance spindle centre to table: 30 mm Distance Spindle nose to Table centre: 50 table load capacity: 400 kg table � indexing: NC � 0,001 Control: Siemense 840D speed of turning table: 25 rpm total power requirement: 63 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.:4,5 x 3,6 x 3,2 m

288

ID	MA32062
Make	WMW Heckert ,Germany
Model	CWK400D
YOM	2003
Condition	Excellent condition,under power
Photo	See Photo
x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Number of pallets: 2 way size of pallet: 400 x 400 mm Collision free rotation dia/max. job dia: 700 mm Maximum job height: 750 mm feeds: 82000 mm/min rapid traverse: 82000 mm/min spindle taper: HSK-A63 spindle motor: 31 kW spindle turning speed range: 10000 U/min Tool magazine positions: 60 fach distance spindle centre to table: 30 mm Distance Spindle nose to Table centre: 50 table load capacity: 400 kg table � indexing: NC � 0,001 Control: Siemense 840D speed of turning table: 25 rpm total power requirement:63 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.:4,5 x 3,6 x 3,2 m

289

ID	MA32057
Make	Kitamura
Model	HX 250
YOM	1998
Condition	Good Condition
Photo	See Photo
2x pallets: 250 x 250 Shopping: 320 x 320 x 400 Changer: 24 tools YASNAC i80

290

ID	MA32047
Make	Kitamura
Model	MYCENTER ZERO
YOM	1997
Condition	Good Condition
Photo	See Photo
Table: 460 x 320 Races: 305 x 255 x 305 16 tools changer YASNAC i80M

291

ID	MA31992
Make	MAZAK
Model	H-25
YOM
Condition	Good Condition
Photo	See Photo
Table - 800x800mm X travel - 1500mm Y travel - 1070mm Z travel - 1640mm Workpiece's weight - 1500kg

292

ID	MA31798
Make	Doosan
Model	HC400
YOM	2007
Condition	Good Condition
Photo	See Photo
Pallet size: 393.75 x 393.75 mm, Number of pallets: 2, Pallet load capacity: 882 LBS, Pallet indexing : 1 degree, X axis travel: 590 mm, Y axis travel: 50 mm, Z axis travel: 555 mm, Spindle speed: 10,000 RPM, Spindle taper: CAT40, Spindle motor: 25 HP, Rapid traverse (X/Y/Z): 1575 IPM, OAD: 2225 x 4500 x 2775 high, Weight approximate: 22000 LBS, Equipped with: Fanuc 21i MB CNc control, 40 position ATC, 16" x 23.5" tomstones with 11.75" x x 23.25" EM chuck and VAR control, Coolant thru spindle,

293

ID	MA31618
Make	Tos Kurim
Model	MCFHD80
YOM
Condition	Good Condition
Photo	See Photo
Clamping pallet table size: 800 x 800 mm Working stroke - longitudinal, lateral, vertical: 1000 x 750 x 750 mm Distance from spindle axis clamping table surface : 0-750 mm pallets Spindle speed range Continuous regulation: 1-3000 mm / min Rapid traverse 7000 mm / min Maximum workpiece weight: 2500 kg Number of tools in magazine 50 Dimensions L x W x H : 4490 x 6010 x 3885 mm Weight 20500 kg

294

ID	MA31413
Make	Hitachi
Model	HG 800
YOM	2000
Condition	Good Condition
Photo	See Photo
800 x 800mm twin pallet, Seicos Sigma 16M Through spindle coolant, CAT 50, Full B axis, X=1120 Y=1050 Z=800mm

295

ID	MA30659
Make	Kitamura
Model
YOM	2000
Condition
Photo	See Photo
X-AXIS TRAVEL .20" Y-AXIS TRAVEL.20" Z-AXIS TRAVEL.15.7" B-AXIS TRAVEL.0.001 PALLET-W..11.8" PALLET-L..11.8" SPINDLE POWER .30 HP SPINDLE SPEED .10,000 RPM TOOL CHANGER .40 ATC MACHINE DIMENSIONS.116" X 86" X 103" MACHINE WEIGHT .15,400 LBS EQUIPPED WITH: FANUC 16iM CNC CONTROL 300 PSI THRU SPINDLE COOLANT 2 AUTOMATIC PALLET CHANGER FULL 4TH AXIS FILTER MIST COLLECTOR

296

ID	MA30647
Make	Youji,Taiwan
Model
YOM	2014
Condition	Excellent
Photo	See Photo
TRAVEL X : 1300MM Y : 1000MM Z : 1200MM TABLE : 800 X 800 (MM) LOAD : 1500KG INDEX : 0.001 SPINDLE : 6000RPM SHANK : BT50 CONTROL : FANUC Oi-MD COMES WITH THROUGH SPINDLE COOLANT

297

ID	MA30617
Make	Heller
Model	MCP250H
YOM	1995
Condition
Photo	See Photo
2 pallets: 630 x 500 Races: 800 x 800 x 710 Magazine: 52 tools Cone: SA 50 Speed: 6000 rev / min CNC Kingdom Pro 90

298

ID	MA30577
Make
Model
YOM	Retrofitted in 2010
Condition
Photo	See Photo
6 pallet brand, NIGATA, HN130B, Control - Siemens 840D, X - 2000 mm, Y- 1600 mm, Z- 1350 mm, W axis- 400 mm, Pallet size- 1320 x 1320 mm, Automatic pallets changer- n degree 6, Max load on the table- 400 kg, Spindle taper- SK50, ATC- 120 pos. , Spindle speed- 20/2500 U/min, Spindle diameter- 130 mm, Spindle driver- 22/26 kw, Feed range- 4000 mm/min, Rapid travel- 10000 mm/min, Total power requirement- 95 kW, Measuring probe- Renishaw, Cooling throught spindle- Yes, Machine weight- 45 tons, Chip conveyor- Yes, Floor space required- 15 x 6,5 x 4,6 meters

299

ID	MA30569
Make	Deckel Maho ,Germany
Model	DMC60H
YOM	1999
Condition	Good Condition
Photo	See Photo
accessories - Chip extractor - technical documentation Sinumerik 840D control system Technical parameters from the catalog: - Working table 400x500 mm - Axis travels: - X: 600 mm - Y: 560 mm - Z: 560 mm Number of tools in the magazine 40 pieces Number of pallets 5 Stem 15,000 rev / min The dimensions of the machine ca. 4800x2800x3000 mm Machine weight about 11500 kg

300

ID	MI6881
Make
Model
YOM
Condition
Photo	See Photo
HMC 03 (TAL) - PALLET CHANGER, X- 1000, Y-500, Z-500, Table size- 400x400, Weight capacity- 500 kg, CT50 / 40 Tools, FANUC

301

ID	MI6880
Make
Model
YOM
Condition
Photo	See Photo
HMC 01 (TAL) - Single Pallet, X-1000, Y-500, Z-500, Table Size- 400x400, Weight capacity- 500 kg, Magazine tools- BT40/20 Tools, SIEMENS 810

302

ID	MA30528
Make	Kitamura
Model
YOM	1998
Condition
Photo	See Photo
Type: MYCENTER H250 Cnc: YASNAC 4 axes X axes: 305 mm. Y axes: 305 mm. Z axes: 330 mm. Spindle speed: 8000 Rpm Tool changer: 14 N� Pallets: 2 Dimension pallets: 250x250 mm. Indexing table: 360� With tools

303

ID	MA30467
Make	Burkhardt&Webber
Model	MC60
YOM	2002
Condition	Excellent condition,under power
Photo	See Photo
XYZ = 1000/800/800 mm, B-axis NC Pallate, C-axis NC Indexing table ( Horizontal ). 2 x pallets 630 x 800 mm, Tool changer Station : 100 Seats, Spindle speeds : 10000 rpm, Tooltaper : ISO50 or HSK100, Total Machine weight : approx. 23.5 tons / incl. Accessories. Control system Siemens 840

304

ID	MA30419
Make	OKK,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Number of pallets 2 Pallet size 500 x 500 mm Pallet load 600 kg Traves : X 720 mm Y 610 mm Z 640 mm Feed rates X / Y / Z l - 5000 mm / min. Rapid traverse X / Y / Z 24000 mm / min, Spindle Taper BT50 Spindle diameter 85 mm Spindle drive power 11/15 kW Spindle speeds of 30 - 4000 rpm. Tool magazine positions 61-fold Tool holder MAS BT 50 Tool diameter max. 230 mm Tool length max. 450mm Tool weight max. 20 kg Tool change time 3 s Machine weight 12600 kg Machine dimensions L x W x H 4920 x 2400 x 2910 mm Control Fanuc 18M Accessories : Chip conveyor

305

ID	MA30417
Make	Heller,German
Model	MCP250H
YOM	1995
Condition	Good Condition
Photo	See Photo
2 pallets: 630 x 500 Races: 800 x 800 x 710 Store: 52 tools Cone: SA 50 Speeds: 6000 rpm CNC Uni Pro 90

306

ID	MA30411
Make	OKK,Japan
Model	HM800S
YOM	New 2015
Condition	Good Condition
Photo	See Photo
X axis travel: 41.34" Y axis travel: 35.43" Z axis travel: 34.65" Rapid tranverse rate: 2,953 IPM, Spindle speeds: 12000 RPM, Spindle motor: 40/35 HP Magazine capacity: 60 ATC Table size: 31.49" Spindle taper: Cat 50 Equipped with Fanuc 31l-B5 control 12000 RPM cat no.50 spindle integral MS Bearing lubrication is Oil sho Brt full 4 th axis table 60 tool magazine Complete preparation for coolant throught spindle with rotary joint High torque spindle; AC 60/40/35 HP 460 FT LBS (155 ED) Big plus double contact spindle Lift-up chip conveyor with hinge belt for steel Coolant thru the spindle W/Filtaration system, operating at 1000 PSI Memory increase from 1280 M to 16,16796 FT (5120 M) 2 MEG NC option package A Custom macro B,82 variables memory increase to 4,199 FT (1280 M), 512 K char/1000 programs programmable mirror image Run hour and parts counter display Tool life management (256 sets) Tool offsets increase to 200 sets total work coordinate system, additional 48 types,

307

ID	MA30391
Make	Mazak,Japan
Model	H500/50N
YOM	1997
Condition	Good working condition
Photo	See Photo
Rapid movement X, Y, Z = 24 m/Min Travels: X 720 mm, Y 650 mm, Z 650 mm Main spindle SK50, drive power 15 kW, Nos. of gear steps: 2 (M38-M39), max. spindle revolutions 6000 rpm, max. torque 600 N/m, max. tool weight 27 Kg, max. tool length 470 mm, max. tool diameter 260 mm, tool exchange time 6.5 sec., Pallet 500 x 500 mm with centring � 50 mm, 24 x M16 threads, max pallet load 1000 Kg, max. pallet swing circle 720 mm �, pallet change time 12 sec. Machine weight 14 tons, machine height without suction 2,975 mm, installation area 3,265 x 4,690 mm (without pallet pool), installation area with pallet pool about 5,000 x 8,000 mm, connected value 51.5 kVA, pneumatic value 6.5 bar. Accessories: Pallet pool with six pallets and integrated pallet manger(FMC) Clamping crosses 400 x 400 x 800 (L x W x H) locking mesh 25 mm (6 units) Automatic machine switch-off after the expiration of unattended operation Tool chain magazine with 80 tool places Tool change selectable in two speeds (heavy and light tools) KNOLL high-pressure filter unit with 400 litres storage tank and 80 bar internal coolant Oil spray suction above the tool change area Filtermister MAYFRAN chip conveyor type Con Sep 2000 Renishaw measuring probes MP3 (2 units) New main spindle in May 2014 Documentation of Mazak Service operations. Control: Mazatrol M-Plus. Axis: X, Y, Z, 4 (fourth axis = NC-axis).

308

ID	MI6754
Make	Mazak,Japan
Model	H400
YOM
Condition	Good Condition
Photo	See Photo
32 tool changer, Dual pallet

309

ID	MA30342
Make	Skoda Czech
Model	MV-W160D
YOM	1988 Reconditioned in 2012
Condition	Good working condition
Photo	See Photo
Two backgrounds 1600 h 2000, Spindle speed : 3000 rpm. With Siemens 840D.

310

ID	MA30340
Make	Heckert
Model	CWK400D
YOM	2003
Condition	Good Condition
Photo	See Photo
Spindle speed: 15000 mm, Movement X: 650 mm, Movement Y: 650 mm, Movement: 650 mm, Control: Speed 15000 rpm, Taper HSK-A63 NC rotary table, B axis 0,001� B axis with torque motor Toolmagazine 60-fold Rapid traverse 82 m/min Equipment 2 fold palett changer Chip conveyor, Pneumatics throught clamping plate, Coolant unit, Knoll Robot interface profibus

311

ID	MA30248
Make	Mitsui Seiki
Model
YOM	1990
Condition	Good Condition
Photo	See Photo
Travel: X: 1800 mm Y: 1500 mm Z: 1200 mm Spindle (W): 500 mm Spindle diameter: 120 mm Distance between spindle and table: 0-1500 mm Distance between spindle center and table center: 500-1500 mm Table length: 1300 mm Table width: 1300 mm Table index angle: 0.001 degrees max. Load : 6000 kg Dimensions of the pallets : 2 x 1300 x 1300 x 200 mm tool taper : BT 50 Rapid traverse: X: 10000 mm / min Y: 10000 mm / min Z: 10000 mm / min W: 2000 degrees / min Working feed: X.Y.Z.W: 4000 mm / min W: 2000 degrees / min Tool changer positions: 92 Servomotors: X.Y.Z.B.W: FANUC Model 30 M Max.spindle speed: 3150 rpm Engine power: 29.8 kW Machine weight: approx .30000 kg, Control: Fanuc 11ME

312

ID	MI6630
Make	OKK
Model	--
YOM
Condition	Good Condition
Photo	See Photo
Travel : 550 x 550 x 550 mm, BT-40 Maxin -60nos/-, Under pawer rpm-8000, 40016 I m Fanue.

313

ID	MI6629
Make	Makino,Japan
Model	HMC1513
YOM
Condition	Good Condition
Photo	See Photo
1000 x 1000, BT-50, Travel : 1000 x 1500 x 1000, Maxine : 120 Nos/- -RPM -4000. FANUS 15M.

314

ID	MA30050
Make	Forest Line
Model	Flexiax508
YOM	1995
Condition	Good Condition
Photo	See Photo
Pallet size : 800 x 800 mm, 4 pallet system, Travel XYZ : 1200 x 1200 x 1375 mm, Max.spindle speed : 6000 rpm, Tool changer : 80 atc. Control : SIEMENS 840C.

315

ID	MA29905
Make	Deckel Maho ,Germany
Model	DMC60H
YOM	2005
Condition	Good Condition
Photo	See Photo
Feed lengthwise/cross/vertical : 60000/60000/60000 mm/min, Rapid movement lengthwise/cross/vertical : 60/60/60 m/min, Tool holder SK 40, Working area 1, lengthwise : 600 mm, Cross : 560 mm, Vertical : 560 mm, Further, Clamping system ISO/DIS : 7388/II Type, Space requirement/weight, Footprint about (width x depth x height) : 4.8 x 5.0 x 2.8 (4.8 x 5.2 x 2.8) m, Weight about : 12700 Kgs, Full protection cabin, chip conveyor, direct path measuring system, Motor spindle : SK 40, 8000 1/min, Type of drive AC, Drive power (100% ED) 13 kW Drive power (40% ED) 20 kW Torque (100% ED) 124 Nm Torque (40% ED) 191 Nm Revolutions area from � up to 1 � 8000 min (-1) NC-rotary table with pallet changer Type of measuring system direct path measuring system Table area 400 x 500 mm Centering bore 20H6 mm Permitted loads (mid of table) 600 Kg Slot width 14 mm Nos. of slots 7 Distance of T-slots 50 mm Changing time about 7 seconds Turning speed max. 4th axis 25.7 1/min 4th axis (swivel range) 360 x 0.001 degree Tool clamping ISO 7388 Tool clamping for draw bolts according to ISO/DIS 7388/2 Type B Tool-breakage monitoring (by Laser) Tool-breakage monitoring (by Laser) with basic software, on break detection machine stands still. Tool length and diameter measuring Tool length and diameter measuring in machine by help of tool-breakage monitoring inclusive software . For that tool-breakage monitoring required. Measuring probe Renishaw MP 10 incl. preparation Measuring probe Renishaw MP 10 SK40 respectively optional selected tool holders, incl. preparation Tool magazine 90 places Application horizontal Type of magazine Kette Type of grippers Pickup Nos of tools 90 Rotoclear 8000 rpm Inspection glass Rotoclear in operators door for revolutions area 1 � 8000 1/min Spray pistol at pallet changer Oil mist separator Oil mist separator Throughput volume 1.275 cbm/h, 1.1 kW Control: Siemens Sinumerik 840D powerline Type: CNC 3-D path control

316

ID	MA29901
Make	Mazak,Japan
Model	FH4000
YOM	2001
Condition	Good Condition
Photo	See Photo
ATC:40, B: 1 degree, 12000 rpm, Control: Mazatrol 640M No tools are included.

317

ID	MA29878
Make	Kiwa,Japan
Model	KNH-426X
YOM
Condition	Good Condition
Photo	See Photo
Control: Fanuc 18i-M X Axis Travel: 13.6" Y Axis Travel: 24" Z Axis Travel: 26.2" Pallets, Number of: 2 Pallets Size: 15.7� x 15.7� Spindle Taper: CAT 40 Spindle Speed: 12,000 RPM Spindle Motor: 35 HP Tool Magazine Capacity: 120 ATC Machine Weight: 23,100 LBS -EQUIPPED WITH- Chip Conveyor Coolant Thru Spindle

318

ID	MA29877
Make	WMW Heckert ,Germany
Model	CW400
YOM	1984 / 1988
Condition	Good Condition
Photo	See Photo
Table : 400 x 400 mm, X travel : 850 mm, Y travel : 500 mm, Z travel : 460 mm, Workpieces weight : 700 kg. Qty : 2 nos.

319

ID	MA29797
Make	Toyoda,Japan
Model	FH400J
YOM	2008
Condition	Good Condition
Photo	See Photo
Pallet Size : 15.75" x 15.75", Table Index Full NC table, X-axis Travel (column) : 23.62�, Y-axis Travel (spindle head) : 22.05�, Z-axis Travel (work table) : 24.80�, Maximum Work Load on the Pallet : 880 lbs, Spindle Drive Motor 30 HP (22 kW) for : 15 min. / 25 HP (18.5 kW) cont. Spindle Output Torque : 123 ft-lb, Spindle Taper : CAT 40, Spindle Speed : 15,000 RPM, Spindle Type Direct drive, Rapid Feedrate (X, Y, and Z axes) : 2,362 ipm (60 m/min), Tool Storage Capacity : 40 Standard (60, 119 Optional), Standard Floor Space : 163" x 99" x 108", Standard Net Weight : 24,200 lbs. Equipped With :- Fanuc 32i-Model A CNC Control, Chip Conveyor.

320

ID	MA29794
Make	Enshu,Japan
Model	JE50S
YOM	2005
Condition	Good Condition
Photo	See Photo
Working Surface of Pallets:15.7" x 15.7" (400 mm x 400 mm) Maximum Load on Table:880 Lbs. Travels � X-Axis:19.7" (500 mm) - Y-Axis:19.7" (500 mm) - Z-Axis:19.7" (500 mm) Rapid Traverse Rate � All Axes:2362" / Min. Spindle Speeds:0 � 12,000 RPM Spindle Taper:CAT 40 Spindle Motor:20 HP 3/60 Overall Dimensions (Approx.):244" x 64" Weight (Est):20,000 Lbs. Equipped With: Fanuc 18iMB CNC Controls 40-Position Automatic Tool Changer Chip Conveyor Mist Collector Through-Spindle Coolant System Through-Spindle Mist System Dual Rotary Automatic Pallet Changer Renishaw Probe

321

ID	MA29785
Make	Kitamura
Model	Mycenter H-400
YOM	New 1998
Condition	Good Condition
Photo	See Photo
Working Surface of Table (2):15.7" x 15.7" Table Travels � X-Axis:24" - Y-Axis:20" - Z-Axis:20" - C-Axis:0.0001" Cutting Feed Rate � All Axes:393" / Min. Rapid Traverse Rate � All Axes:944" / Min. Spindle Taper:CAT 40 Spindle Speeds:10,000 RPM Maximum Tool Weight:13.2 Lbs. Motor: 20 HP 220V 3/60 Weight (Est.):19,000 Lbs. Equipped With: Fanuc 15M CNC Control (under extended warranty) Full 4th Axis 100-Position Automatic Tool Changer Through-Spindle Coolant System Turbo Chip Conveyor (6) Pallet System

322

ID	MA29742
Make	Mitsui Seiki
Model	HU63A
YOM	New 1998
Condition	Good Condition
Photo	See Photo
Working Surface of Pallets (2):24.8" x 24.8" Travels � X-Axis: 39.43" - Y-Axis: 31.49" - Z-Axis:31.49" Table Indexing: 1 Degree Distance From Table to Spindle:5.9" � 37.4" Feed Rate:0.004" � 394" / Min. Spindle Speeds:10,000 RPM Spindle Taper: No. 50 BT Spindle Motor:40 HP Overall Dimensions (Approx.):. 214" x 127" x 122" H Weight (Est.):37,400 Lbs. Equipped With: Fanuc 16M CNC Control Box Way Construction Coolant System Chip Conveyor Automatic Tool Changer

323

ID	MA29739
Make	WMW Heckert ,Germany
Model	CWK400
YOM	New 1996
Condition	Good Condition
Photo	See Photo
Working Surface of Pallets (2):15.75" x 15.75" Maximum Load on Pallet:880 Lbs. Pallet Change Time:8 Seconds Maximum Work Piece Height:29.53" Travels � X-Axis: 25.6" - Y-Axis:19.7" - Z-Axis:25.6" - B-Axis: 360,000 Degrees Rapid Traverse Rate:1417" / Min. Spindle Speeds: 10,000 RPM Spindle Taper:CAT 40 Spindle Motor � @ 100% Duty:24 kW 3/60 - @ 40% Duty:37 kW 3/60 Maximum Tool Weight: 22 Lbs. Overall Dimensions (Approx.): 192" x 130" x 108" H Weight (Est.): 29,000 Lbs. Equipped With: Siemens Sinumerik 840D CNC Controls w/ Handheld Remote 60-Position Automatic Tool Changer (2) Kurt "Carvlock Tower" Workholders BMF Chip Conveyor w/ Paper Filter Crate of Miscellaneous Tooling Coolant System Full Enclosure

324

ID	MA29733
Make	Hitachi Seiki,Japan
Model	HC400
YOM	New 1990
Condition	Good Condition
Photo	See Photo
Working Surface of Table:15.7" x 15.7" Travels � Longitudinal:20" - Cross: 18" - Vertical:18" Minimum Table Index1 Degree Distance Spindle C/L to Table Top:2" Min. � 20" Max. Distance Spindle Nose to Table Center:7" Min. � 25" Max. Maximum Table Load: 880 Lbs. Cutting Feed Rates: 0.01" � 200" / Min. Rapid Traverse Rate:.590" / Min. Spindle Taper:BT-40 Spindle Speeds: 40 � 6000 RPM Spindle Motor:7.5 HP Continuous / 10 HP for 30 Min. Maximum Tool Size:3.7" Diameter x 11.8" Length Maximum Tool Weight:22 Lbs. Electrics:220V 3/60 Overall Dimensions (Approx.):99" L-R x 127" F-B x 105" H Weight (Est.):14,300 Lbs. Equipped With: Fanuc 15-M CNC Control 30-Position Automatic Tool Changer Single Table Geared Spindle Head Spindle Chiller Chip Conveyor Full Enclosure (3) Miscellaneous Tool Holders Manuals

325

ID	MA29674
Make	Olivetti,Italian
Model	Mecof M240
YOM	2007
Condition	Good Condition
Photo	See Photo
Table: 2000 x 2000 mm, Spindle: 128 mm, Cone: 50, RPM: 7-2000 Power: 29 kW, X/Y/Z: 3000/2000/1000 mm, Control: Sinumerik 840D, Weight: 70 ton

326

ID	MA29660
Make	Mori Seiki
Model	SH40
YOM	1997
Condition	Good Condition
Photo	See Photo
Pallet size: 400 x 400 mm, 1 Degree indexing, Traverse X/Y/Z: 560 x 510 x 510 mm, 40 auto tool changer, Spindle BT40, Spindle speeds to: 10,000 RPM, Swarf conveyor, Tooling, Control: Mori seiki MSC518

327

ID	MA29643
Make	Mori Seiki
Model	SH50
YOM	1996
Condition	Good Condition
Photo	See Photo
Travel X : 630 mm, Travel Y : 600 mm, Travel Z : 650 mm, Spindle taper : SK 40, Spindle speed : 20,000 rev / min. Spindle drive : 22 / 18.5 kW, Table Indexing : 0.001 degree, Tool magazine : 180 Number, Pallet changer : 18 pallets, With pallet station, Of pallet: 500 x 500 mm, Weight machine : 15 tons + 8 tons pallet station. FANUC Fanuc 16, MSC 516.

328

ID	MI6563
Make	Daewoo
Model
YOM
Condition	Good Condition
Photo	See Photo
Size of pallet : 500 x 500 mm, Double pallet changer and bt 50 spindle.

329

ID	MA29608
Make	Mazak,Japan
Model	H1250
YOM	1998
Condition	Good Condition
Photo	See Photo
Pallet 1250 / 2 Pallets. ATC-120. 4000ｒｐｍ. Index 0.001. X-2000 Y-1560 Z-1200. Control: MAZATROL M-PLUS.

330

ID	MI6529
Make	SuperMax,Taiwan
Model	YCM500B
YOM
Condition	working condition ,under power
Photo	See Photo
40 mtrs/min rapid, Control: Fanuc FS 18 MC , Quantity: 2

331

ID	MA29466
Make	Hitachi Seiki,Japan
Model	HS630
YOM	2001
Condition	Good Condition
Photo	See Photo
Lanes X / Y / Z : 850 mm / 800 mm / 850 mm, Max. Spindle speed : 10000 RPM, Spindle power : 30/25 kW ( 40/33 HP ), Pallete size : 630 x 630 mm, Pallets changer : 2 no. Tool magazine with : 60 seats / BT 50, Rapid : 45000 mm/min, Feeds : 45000 mm/mm, Cooling through spindle : 70 Bar, Spiral chip conveyor 2 x, NC - rotary table as a full B-axis, Tool length measurement and breakage control, Cutting monitor, Automatic alignment of the work pieces, Main memory expansion to : 320 m / 128 KB, Servo Motors :- X = Fanucmodel a30, Y = Fanucmodel a40, Z = Fanucmodel a 30, Total Machine weight : 16 tons. With CNC Control 16iM.

332

ID	MA29239
Make	Makino,Japan
Model	A55E
YOM	2000
Condition	excellent working condition
Photo	See Photo
Professional 3 HSKA 63, 2 pallet 400*400, Principal axis : 10000 rpm, Stroke : X-560 Y-560 Z-600, ATC : 30, Center through coolant, Chip conveyor, Index : 0.001.

333

ID	MA29225
Make	Kitamura
Model	Mycenter-H630
YOM	1988
Condition	Good Condition
Photo	See Photo
X/Y/Z axis travel: 1,016/813/765 mm, Spindle speed: 20-3,500 rpm, 120 ATC, 6 APC, Control: Fanuc 15-M

334

ID	MA29151
Make	Doosan
Model	ACE H100
YOM	2005
Condition	Good condition,under power
Photo	See Photo
Table size 1000 x 1000 mm Number of pallets 2 Movement x-Axis 2000 mm y-Axis 1250 mm z-Axis 1250 mm Table index 1� Number of tools in magazine 120 pieces Maximum spindle speed 20-4.500 min Tool taper CAT 50 CNC control Fanuc 18 i-MB Tooling comes with the machine.

335

ID	MA29150
Make	Doosan
Model	DHM800
YOM	2005
Condition	Good condition,under power
Photo	See Photo
Pallet Size (2 Pallets) : 788 x 788 mm, Pallet Indexing : 360�, Table Load : 3,520 Lbs, X-Axis Travel : 1225 mm, Y-Axis Travel : 985 mm, Z-Axis Travel : 985 mm, Spindle Speeds Minimum - Maximum (3-Speed Geared) : 50 - 6,000 RP, Main Motor (30 min / continuous) : 40/29, Spindle Center to Table Top : 198 - 1180 mm, Tool Changer Positions : 90 ATC, Tool Change Time (Tool-to-Tool / Chip-to-Chip) : 1.3 / 3.9 Sec. Rapid Traverse (X, Y & Z ) 945 IPM, Feed Rate : 0.01 - 472 IPM, Equipped With :- Rigid Tapping Remote Jog Handle Coolant Through Spindle Remote Jog Handle Spindle Chiller Unit Turbo, Chip Conveyor, Dimensions : Floor Space (L x W x H) : 7000 x 4200 x 3300 mm, Weight (approx.) : 40,500 Lbs. Control Fanuc 18iMB.

336

ID	MA29148
Make	Heckert
Model	STC630D
YOM
Condition	Good Condition
Photo	See Photo
X axis : 1050 mm, Y axis : 1000 mm, Z axis : 1160 mm, A axis round endless (grad), Min distance work spindle front edge to mid- range : 190 mm, Min distance work spindle center to upper edge of pallet : 100 mm, Max allowable high jig of workpieces and for the replacement in the workspace : 1100 mm, Max Cockpit Load on pallet : 800 kg, Centering die : 56 H6, Fastening thread number : 23 x M16, Distance of directing drilling to table center : 200 +/- 0,013 mm. HSK 100. 70 bar coolant trough spindle. 60 tools. Renishaw MP10. Laser measuring.

337

ID	MA29146
Make	Niigata
Model	HN63C
YOM	2001
Condition	Good Condition
Photo	See Photo
T : 630, S (XYZ) : 1000850750, T : 1�2 APC, 5000 rpm, BT 50, ATC 60本, Fanuc-15M.

338

ID	MA29144
Make	Hitachi
Model	HS630
YOM	2001
Condition	Good Condition
Photo	See Photo
BT 50,　 ATC 120, 630*630, 8 pallet, 10000 rpm,　 (0.001度割出), FANUC16-M.

339

ID	MA29143
Make	Okuma,Japan
Model	MA60HB
YOM	2000
Condition	Good Condition
Photo	See Photo
OSP-U10M / BT 50, ATC 100/630, 2 pallet /5000 rpm, S : X 1000 * Y 800 Z 810, 1 Degree, Chip Conveyor, Center Through.

340

ID	MA29127
Make	Doosan
Model	HM5000
YOM	2007/2010
Condition	Good Condition
Photo	See Photo
XYZ : 800/650/650 mm, B : 0.0001 degrees, Range : 500 x 500 mm, Spindle : 6000 1 / min . Transmission, Tool : SK 50, Magazine : 60 times, IMC : 20 bar, Control : Fanuc 31iA.

341

ID	MA29062
Make	Toyoda,Japan
Model	FA800S
YOM	2008
Condition	Good condition,under power
Photo	See Photo
Travels :- X : 1.350 mm, Y : 1.150 mm, Z : 1.150 mm, B : 360.000 Positions = 360 x 0,001�- NC Table, Palettsize : 800 mm x 800 mm � 2 Paletts, Max. load : 2500 kg, Max. workpiec dimensions : diameter 1.600 mm x 1.300 mm height, Palett changing time : 37 s, Spindle speed : 10 � 6.000 rpm � High Torque Gear Spindle, Spindle power : 37/45 KW, Torque : 1.073/1.309 Nm, ATC with 40 tools, Rapid feed : 24.000 mm/min � flat box guiding system, Inner coolant through Spindle, Additional coolant tank with filter unit, Chip conveyor. Renishaw touch probe OMP 60, Rebuilt with HEIDENHAIN iTNC 530 with HR 410 in 2012 � all new motors, drives, Linear Scales etc. With 2 pallets changing system.

342

ID	MA29018
Make	Hitachi
Model	HC630
YOM	1990
Condition	Good Condition
Photo	See Photo
TC 80, BT 50, B axis .0001 Degree, Chip Conveyor, FANUC-15M. Tools are not available.

343

ID	MA28822
Make	Makino,Japan
Model	A88E
YOM	2003
Condition	Good Condition
Photo	See Photo
5 axis MC, 630 main axis HSK- A100 (18000 rpm), Basis 0.001 deg, MDU501-R01 (φ500mm), Professional, Coolant through tool and air, Chip conv

344

ID	MA28773
Make	Burkhardt&Webber
Model	MC120
YOM	1988
Condition	Good Condition
Photo	See Photo
X/Y/Z : 2800/1250/1800 mm, Tool holder : SK 50, Speeds : 20-4000 RPM, Rotary table : 1000 x 1000 / 360�, Tool changer : 98 fold, 2 pallets of : 1400 x 1800, 1 pallet of : 1400 x 1600, Total power : 85 KW, Dimensions : 9 x 8 x 5 m, Weight : 55.2 t. Control : SIEMENS SINUMERIK 850 M with SPS S 5-150, Chip conveyer KNOLL, Tool storage magazin, ATC with douple gripper, Pallet changing unit, paper band filter unit, Hydraulic unit, tank 260 ltr. central lubrication, VOGEL, tank 15 ltr. coolant unit, tank 1200 ltr, noise/splash protection cabine, Spindle-automatical tool clamping, Optoeletronical toolbreakage monitoring, Electronical measuring unit FA. RENISHAW.

345

ID	MA28752
Make	Makino,Japan
Model	A99
YOM	1998
Condition	Good Condition
Photo	See Photo
4 AXIS HOR. Control system Professional 3, Work table size : 800 x 800 mm, Max. load capacity : 1800 kg, X axis travel : 1000 mm, Y axis travel : 1000 mm, Z axis travel : 950 mm, Tool storage capacity : 90 pcs, Spindle speed : 50~18000 rpm, Type of tool shank : BT 50.

346

ID	MA28749
Make	Niigata
Model	SPN50
YOM	1995
Condition	Good Condition
Photo	See Photo
F-16M BT50 12,000rpm ATC60

347

ID	MA28748
Make	Niigata
Model	SPN50
YOM	1996
Condition	Good Condition
Photo	See Photo
F-16M BT 50 12,000 rpm ATC 60

348

ID	MA28747
Make	Mori Seiki
Model	SH630
YOM	1996
Condition	Good Condition
Photo	See Photo
MSC-516 630角 2 APC BT 50 12,000 rpm ATC 60

349

ID	MA28746
Make	Okuma,Japan
Model	MA600HII
YOM	2012
Condition	Good Condition
Photo	See Photo
OSP- 200 MA, 6000 rpm BT-50,ATC-60 XYZ: 1000900100 0.001� 2APC T:630*630 Chip Conv/Through Spindle/OSP-3D-D kit

350

ID	MA28745
Make	OKK,Japan
Model	BT50
YOM	1999
Condition	Good Condition
Photo	See Photo
F-18iM Rev: 8000 rpm T:500�2APC 0.001�　X 760 Y 730 Z 800 ATC-40

351

ID	MA28744
Make	Hitachi
Model	HS500sp
YOM
Condition	Good Condition
Photo	See Photo
∑18M 12000 rpm HSK-NC585 X500　2APC ATC-91

352

ID	MA28743
Make	Hitachi
Model	HS500
YOM	2000
Condition	Good Condition
Photo	See Photo
T:5005002APC total weight:500kg S:680680680 BT40, 20000rpm(高速) ATC-60 Control:Fanuc-16MA

353

ID	MA28742
Make	Mitsui Seiki
Model	HU40A
YOM	2001
Condition	Good Condition
Photo	See Photo
ATC: 60, BT40, Pallet:400 x 400 x 2APC, S:560 x 560 x 560 , 20000 rpm, B axis: 0.001 degree, Control: Fanuc16iM

354

ID	MA28741
Make	Makino,Japan
Model	A55
YOM	2001
Condition	Good Condition
Photo	See Photo
Profesional-3 (F-16M), T:400 x 400 x 2APC, S:560 x 560 x 560, 20000 rpm, HSK-A63, ATC40.

355

ID	MA28740
Make	Makino,Japan
Model	A51C2
YOM	2015
Condition	Good Condition
Photo	See Photo
HSK-A63 ProfessionalI5 ATC 60, 400 Angle, 2 Pallet, S: X 560 Y: 560, Z:600, 20000 rpm.

356

ID	MA28637
Make	Doosan
Model	ACE H100
YOM	2007
Condition	Good Condition
Photo	See Photo
X: 2000 mm, Y: 1120 mm, Z: 1000 mm, Palett 1: 1000�1000 mm, Palett 2: 1000�1000 mm, Table: 1 degree, Spindle RPM: 4500, Spindle taper: ISO 50, Control: Fanuc 18i-MB ATC 60 positions. Chip conveyor

357

ID	MA28442
Make	Huller Hille
Model	Genius500
YOM	2004
Condition	Good Condition
Photo	See Photo
X travel: 630 mm, Y travel: 650 mm, Z travel: 800 mm, 2 pallets: 630 x 500 mm, Spindle motor: 29 kW, Max. spindle speed: 16000 rpm, Spindle torque; 85/134 Nm, B axis: 0.001�, ATC with 57 positions, Control: Siemens Sinumerik 840 D

358

ID	MA28255
Make	Hyundai
Model	SPT800
YOM	2002
Condition	Good Condition
Photo	See Photo
X axis : 1250 mm, Y axis : 1000 mm, Z axis : 850 mm, Spindle taper : ISO 50, Spindle speeds : 22 - 4500 rpm, Dimensions of pallets : 800 x 800 mm, Pallet load : 2200 kg, Rapid feed X / Y / Z axis : 18000 mm, Cutting feed X / Y / Z axis : 8000 mm, Dimensions : 3270 x 5510 x 3183 mm, Weight of the machine : 20000 kg. CNC Fanuc 18 M. 2 Pallets.

359

ID	MA28217
Make	Mori Seiki
Model	SH630
YOM	1997
Condition	Good Condition
Photo	See Photo
Pallet size : 630 x 630 mm, x travel : 840 mm, y travel : 760 mm, z travel : 840 mm, ISO 50 spindle taper, Speeds to 10,000 rpm, 60 tool ATC, 3 axis plus 1 deg indexing, Swarf conveyor, Manuals, Control : MSC-516.

VKengg.co.in

Category : Machining Center

Sub-Category : Machining Center Horizontal