V. K. Engineering - Buying & Selling of Machines made easy

Category : Sheet Metal

Sub-Category : Press Hydraulic

Total Machines Found : 157

Select

| Machine Details

ID	MA39570
Make	GALDABINI
Model
YOM
Condition	Good Condition
Photo	See Photo
Ton 250 Table - width (mm) 1250x1000 Subtype (DM / CDC) DM CE mark No Slide - stroke (mm) 800 Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) Hydraulic Slide - width (mm) 1250x1000 Push points 1 Sled - number of guides 4 Approach speed 400 Working speed at 50% 40 100% working speed 20 Ascent rate 400 Light pms (mm) 1300 Blank holder cushion - total force (ton) 125 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) Plumber Blank holder cushion - number of cushions 1 Blank holder cushion - stroke (mm) 320 External dimensions - width (mm) 2200x1300 External dimensions - height above ground (mm) 5500 Conections electrical panel (working, missing, overhauled, to be overhauled) working Conditions working Weight (ton) 28 Foundation (cm) 1000

ID	MA39569
Make	Emanuel
Model	DEA200
YOM	1976
Condition	Good Condition
Photo	See Photo
Stock Number 451 Ton 200 Table - x (mm) 1300x1000 Table - width (mm) 1300x1000 Subtype (DM/CDC) DOUBLE UPRIGHT Conditions WORKING Frame (H/C) H FRAME Drive system (eccentric/link motion/knucle joint/hydraulic/screw fly) HYDRAULIC Slide - width (mm) 1300x1000 Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) OLEODYNAMIC Slide - adjustable stroke (mm) 700 Table - y (mm) 1000 Push points 1 Sled - number of guides 4 Approach speed 500 Working speed at 50% 21 100% working speed 47 Ascent speed 400 Light pms (mm) 1000 Piston rods 1 Front light between uprights (mm) 1300 Side window between uprights (mm) 300 Slide - number of guides 4 Blank holder cushion - total force (ton) 30 Blank holder cushion - movement (hydraulic/pneumatic/hydropneumatic) PLUMBER Approaching speed 500 Blank holder cushion - number of cushions 1 Blank holder cushion - retarder YES Working at 50% speed 21 Blank holder cushion - stroke (mm) 250 External dimensions - width (mm) 2000 Working at 100% speed 47 External dimensions - depth (mm) 1000 External dimensions - height above ground (mm) 4500 Rising speed 400 Weight (ton) 15 Electrical components - number of motors 2 Tdc span (mm) 1000 Motor power (kw) 36 Electrical panel conditions (working, missing, overhauled, to be overhauled) WORKING Lateral window (mm) 300 Safety protections (front/rear) FRONT AND REAR Electrical components - further info ORIGINAL ELECTRIC PANEL Die cushion - total strength (ton) 30 Die cushion - motion (hydraulic/pneumatic/hydropneumatic) HYDRAULIC Front span between the pillars (mm) 1300 Subtype (DM / CDC) DOUBLE UPRIGHT Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) HYDRAULIC Die cushion - retardant YES Die cushion - number of cushions 1 Die cushion - stroke (mm) 250 External dimensions - height (mm) 4500 External dimensions - X (mm) 2000 External dimensions - Y (mm) 2000 Motor power (kW) 36 Safety protections (frontal/posterior) FRONTAL AND POSTERIOR Electrical components - other infos ORIGINAL ELECTRICAL PANEL Electrical panel conditions (working/missing/complete inspection/inspection required) WORKING Ascent rate 400 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) PLUMBER Front gap between uprights (mm) 1300 Side window between the uprights (mm) 300 Electrical components - No. of motors 2 Conections electrical panel (working, missing, overhauled, to be overhauled) WORKING Safety protections (front / rear) FRONT AND REAR Electrical components - more info ORIGINAL ELECTRICAL PANEL

ID	MA39568
Make	Emanuel
Model
YOM	1974
Condition	Good Condition
Photo	See Photo
Ton 160 Frame H FRAME Table - x 1000.0 Table - y 1000.0 Slide - piston rods 1.0 Piston rods 1.0 Table - width (mm) 1000 Slide - stroke (mm) 600 Slide - x 1000.0 Slide - stroke - mm 600.0 Mould mounting - tdc span (mm) 1000.0 Mould mounting - lateral window (mm) 300.0 Die cushion - total strength (ton) 60.0 Slide - number of strokes/minute 180-40 Die cushion - stroke (mm) 300.0 Number of strokes / min 180- 40 External dimension - x (mm) 1800.0 External dimension - height (mm) 4500.0 Listing id 345 Subtype DOUBLE UPRIGHT External dimension - y (mm) 1800.0 External dimension - weight (ton) 10.0 Travola - depth 1000.0 Electrical components - other infos ORIGINAL Slide - y 1000.0 Stroke - mm 600.0 Sled - push points 1.0 Electrical components - motor power (kw) 36.0 Sled - width 1000.0 Tdc span 1000.0 Y 1800.0 Height 4500.0 Weight 10.0 Motor power 36.0 Lateral window 300.0 Stroke 300.0 Total strength 60.0 Number of strokes/minute 180- 40 X 1800.0 Sled - depth 1000.0 Mold assembly - pms light 1000.0 Mold assembly - side window between the uprights (mm) 300.0 External dimensions - width (mm) 1800.0 Blank holder cushion - stroke (mm) 300.0 Electrical components - more info ORIGINAL External dimensions - weight (ton) 10.0 External dimensions - height above ground (mm) 4500.0 External dimensions - depth (mm) 1800.0 Conditions WORKING, WORKING Visible to SUSA (TO) Push points 1.0

ID	MA39566
Make	SMG
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Power 150 ton Table dimensions 1000 x 850 mm Stroke 1000 mm Light at T.D.C. 1350 mm Speed work at 100% 17 mm/sec Features without cushion Weight 130 ton

ID	MA39558
Make	Hyundai
Model	HTP-500-230-180
YOM	1993
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Stroke - 1300 mm Day light - 1500 mm Slide area - 2300x1800 mm Bolster area - 2300x1800 mm Descending speed - 120 mm/sec Ascending speed - 117 mm/sec Pressing Speed - 12 mm/sec Working Pressure - 210 kg/cm Die Cushion : Capacity - 20~150 ton Stroke - 400 mm Pad area - 1800x1200 mm M/Bolster Loading weight - 20 ton Stroke length - 2500 mm Area - 2300x1800 mm Turning Device Loading weight - 25 ton Area - 2300x1800 mm Main motor - 90kw x 6P x 60 Hz Main pump - A7V250

ID	MA39544
Make	Chinese
Model	YO32-500
YOM
Condition	Good Condition
Photo	See Photo
Tonnage: 500 tons Slide Stroke: 800 mm Strokes per Minute: 10-15 times Shut Height: 1200 mm Slide Adjustment: 800 mm Worktable Size: 3200x1800 mm Slide Size: 3200�1800 mm Movable Worktable: Yes Ejector Steel Tonnage: 250 tons Ejector Steel Stroke: 200 mm Mold Clamping Size: Customizable

ID	MA39534
Make	IVO Lola Ribar
Model
YOM
Condition	Good Condition
Photo	See Photo
Work table 1600x1250 mm max. piston opening 1300 mm. Piston stroke 800 mm. Min. tool height 500 mm. Max. oil pressure 260 bar. Ejector in lower table 40 tons.

ID	MI11393
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
500 ton

ID	MA39516
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
200 tons

ID	MA39513
Make	Emanuel
Model
YOM	1979
Condition	Good Condition
Photo	See Photo
Ton 640 Table - width (mm) 3200 x 2000 Slide - stroke (mm) 1000 Subtype (DM/CDC) DM2C CE mark no Conditions to be reviewed Drive system (eccentric/link motion/knucle joint/hydraulic/screw fly) Hydraulic Pull-out table (front/side/T-track) no Sled - width (mm) 3200 x 2000 Push points 2 Sled - number of guides 4 Approach speed 400 Working speed at 50% 22 100% working speed 11 Ascent speed 230 PMS light (mm) 1800 Side window between pillars (mm) 900 Blank holder cushion - total force (ton) 250 Blanking pad - movement (hydraulic/pneumatic/hydropneumatic) plumber Blanking pad - number of pads 6 Blank holder cushion - stroke (mm) 400 External dimensions - width (mm) 4700 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 5800 Weight (ton) 110 Foundation (cm) Yes Electrical components - number of motors electrical cabinet with PLC Engine power (kW) 120 Electrical panel conditions (working, missing, overhauled, to be overhauled) revised Photocells (front/rear) Yes Cylinder block valve Yes Mechanical slide block Yes Proportional valves Yes

ID	MA39236
Make	Farina,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
Nominal Force - 800 Ton Working Surface - 3.850 cm2 Distance Through Pistons (Passage) - 1.850 mm Rapid Feed Rate - 300 mm/sec. Max Working Feed Rate - 87 mm/sec. With 350 Ton Force Intermediate Working Feed Rate - 60 mm/sec. With 460 Ton Force Min Working Feed Rate -35 mm/sec. With 800 Ton Force Piston Return Feed Rate -330 mm/sec.

ID	MI11252
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Bed size 1500 x 900 mm servo hydraulic press 10 Nos Available

ID	MA39206
Make	Kawasaki
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Table - 900 x1100 Stroke - 800 Daylight - 1600

ID	MI11192
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 63 Tons

ID	MA39047
Make	WMW Erfurt,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity :250 Tons C Frame

ID	MA39020
Make	Amino
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton Stroke:1500 mm Daylight:2500 mm Bolster:2300 x 1500 mm Slide Die Cushion:150 ton Cushion Stroke:650 mm Cushion Pad1800x 1000 mm Downward speed:340 mm/sec Operating speed62 - 32 mm/sec Return Speed:340 mm/sec Cushion Speed:125 mm/sec

ID	MA38950
Make	Amino
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity :600 ton Stroke:1400 mm Daylight :2000 mm Moving Bolster:3000 x 2000 mm Moving Bolster Stroke 2250 mm Moving Bolster Speed 100 mm/sec Slide:3000 x 2000 mm Die Cushion 200 ton Cushion Stroke 300 mm Cushion Bed 2500 x 1400 mm Pin Raising Speed 60 mm/sec Descending Speed 200 mm/sec Raising Speed2:00 mm/sec Main Motor:55Kw, 4p, 220V

ID	MA38835
Make	Bakker
Model	HSPP 50
YOM	1971
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton Length : 8400 mm Width : 1500 mm Height : 5200 + 2000 mm 2000 mm in ground closing speed + pressing speed: 850 mm/min return speed: 5500 mm/min also fitted with a jib crane and two tables are included max open: 2700 mm (without table) Motor 80 HP It�s actually a 600 ton but because the piston is off centre it�s allocated as 500 ton Consists out of: Top half: 8600 x 1650 x 3560 mm � 20 ton Bottom half: 8450 x 2400 x 3700 mm � 20 ton dismantled condition

ID	MI11070
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -150 Ton 7.5 hp Motor Length 5 feet Wirdth -400mm Height -600mm

ID	MA38784
Make	Ogiwara
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Capacity - 1000 ton Upward capacity 87 ton Main Cylinder 420 mm x 250 x 1820 (2) Main Cylinder280 mm x 280 x 1820 (1) Stroke 1800 mm Daylight 2500 mm Downward speed 725 mm/sec Upward speed 725 mm/sec Table 4500 x 2500 mm Table Stroke 3700 mm Table Speed 130 mm/sec Die cushion Capacity 250 ton Cushion stroke 0 - 300 mm Pad Size 3550 x 2050 mm Upward speed 150 mm/sec Downward speed 60 mm/sec Pumps Main hydraulic pump 315 kg/cm2 Sub Pump 140 kg/cm2 Pilot Pump 70 kg/cm2 Oil Cooler Pump 5 kg/cm2 Motors Main motor AC 400V - 300 Kw - 8P (2) Sub Motor AC400V - 55 Kw - 4P Pilot Motor AC400V - 7.5 Kw - 4P

ID	MA38764
Make	STA
Model	GALDABINI
YOM	1983
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 Ton Shut Height - 1100 mm Max. work pressure - 238 bar Min. work pressure - 30 bar Max. adjustable path - 1100 mm Internal vertical max. space - 1700 mm Horizontal width - 2100 mm Base Dimensions - 2000x1400 mm

ID	MA38752
Make	Kawasaki
Model
YOM	1991
Condition	Good Condition
Photo	See Photo
Stroke 1000 mm Daylight 1500 mm Bolster 1500 x 1000 mm Slide 1500 x 1000 mm Downward speed 300 mm/sec Operating speed 33 - 3 mm/sec Raising Speed 300 mm/sec Upper Knockout 1 ton Knockout stroke 50 mm Knockout Speed 50 mm/sec Raising Speed 73 mm/sec Top Knockout 10 ton Knockout stroke 165 mm Knockout Speed 100 mm/sec Raising Speed 100 mm/sec Moving Bolster Travel 2000 mm Moving Bolster Travel Speed 150 mm/sec

ID	MA38637
Make	Loire Safe
Model	S1000-04-75
YOM	2003
Condition	Good Condition
Photo	See Photo
Capacity 100 - 1.000 t Bed size 5.000 x 2.480 mm Tool max Dimension 5.000 x 2.500 x 1.500 mm Lateral distance between columns 2.500 mm Stroke 1.500 mm Max. weight of upper tool 16.000 kg Daylight 2.000 mm Working Speed 22-72 mm/s Return Speed 280 mm/s Advance Speed 400 mm/s Lower cushion 3.700 x 1.900 mm / 40 � 400 t / 400 mm Upper cushion 3.400 x 1.800 mm / 15 � 150 t / 300 mm Height over floor 6.000 mm Weight 205 t Power supply 400 V, 50 Hz, 245 kW

ID	MA38636
Make	Schuler Smg
Model	2500
YOM	2003
Condition	Good Condition
Photo	See Photo
Upper force 2500 t Ram capacity 1800 t Blankholder stroke 1850 mm Slide stroke 1960 mm Table dimensions 3500 x 1650 mm Max shut height 3060 mm Blankholder area 5000 x 2400 Max. cushion capacity 600 t Cushion stroke 320 mm Power supply 400 V, 50 Hz

ID	MA38599
Make	Loire Safe
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CAPACITY 800 TON ADJUSTABLE MAXIMUM FORCE 80 X 800 MM RETURN FORCE 81 TN ROUTE OF THE MOBILE PLATE 1600 MM MAXIMUM OPENING BETWEEN FIXED TABLE AND MOVING PLATE 1900 MM DIMENSION OF THE TABLE 2800 X 2000 MM SLOTS IN T 28 FRONT PASSAGE BETWEEN MOUNTS 2850 MM MOVING PLATE GUIDING HEIGHT 1400 MM GUIDE PLATE WIDTH 100 MM TABLE HEIGHT ABOVE LEVEL ZERO 800 MM MAXIMUM TABLE HEIGHT ABOVE ZERO LEVEL 7.785 MM SIDE PASSAGE BETWEEN MOUNTS 1.000 MM SPEEDS QUICK APPROACH 400 MM/SEG. WORK 526 TN COSNTANT, 42,7 MM/SEG FROM 536 TO 800 TN , VARIABLE AUTO ADJUSTABLE 42,7 MM/SEG LIMITATION OF THE MAXIMUM SPEED BY PROPORTIONAL VALVE AND POTENTIOMETER, WITH 2 PUMPS 47,2 TO 21 MM/SEG WITH 1 PUMP 21 TO 5 MM/SEG RETURN 420 MM/SEG DOWN TIME 180 MS SAFETY DISTANCE 288 MM MAXIMUM STRENGTH OF ADJUSTABLE CUSHION 32 TO 320 TN CUSHION TABLE DIMENSIONS; FRONT 2500 MM BOTTOM 1700 MM CUSHION DEPTH 400 MM ASCENT AND DESCENT SPEED 150 MM/SEG CANDLE DIAMETER 50 MM HOLE DIAMETER IN THE TABLE FOR THE SAIL PASSAGE 52 MM CANCELING THE FORCE OF THE CUSHION AT THE END OF WORK TO ALLOW TO USE THE FULL FORCE OF THE FILLER IN THE FINAL STAMPING WEIGHT 100 TN COOLING WATER FLOW AT 20� C 154 L/MIN. AMBIENT TEMPERATURE DOWN AT 40� RELATIVE HUMIDITY LESS THAN 85 % TOOLS MAXIMUN DIMENSIONS ; FRONT 2800 MM BOTTOM 1800 MM HIGH 1500 MM MAXIMUN WEIGTH ; MOBILE PART 15.000 KG TOTAL 40.000 KG ELECTRIC CONNECTION POWER 246 KW

ID	MA38589
Make	Muller Weingarten
Model	ZE2000 - 30 Hydraulic High
YOM	2004/2006
Condition	Good Condition
Photo	See Photo
Press total capacity 2000 tons Slide cushion capacity 200 tons Bed cushion capacity 400 tons (4 x 100 tons) Press slide stroke 1400 mm Slide cushion stroke 200 mm Bed cushion stroke 400 mm Bed area 3000 mm x 1900 mm Slide area 3000 mm x 1900 mm Cushion area 2450 mm x 1550 mm Daylight maximum 1800 mm Daylight minimum 400 mm Lowering speed 500 mm/s Working speed up to 345 tons 170 mm/s Working speed up to 550 tons 105 mm/s Working speed up to 900 tons 66 mm/s Working speed up to 1000 tons 60 mm/s Working speed up to 1600 tons 35 mm/s Working speed up to 2000 tons 26 mm/s Return speed 370 mm/s Power 750 kW (3 x 250 kW) Tabletop as extension plate Front Extension direction 3000 mm Lifting capacity 20 tons Extension speed 1.5 � 6 m/min Top of table over floor 450 mm Approximate height above floor 8200 mm Front Moving Bolster / Table Both Presses As New Condition. Only Occasional Use on Tool Trial Operations. No Production Use.

ID	MA38485
Make	Hyundai
Model	HYD 2500-500
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 2500 Ton Stroke Length 1000 mm Open Height 1800 mm Die Height 800 mm Slide Adjust 1000 mm Slide Area 4000 x 2500 Bolster Area 4000 x 2500 Main Pump Motor 150 x 1 HP Pilot Pump Motor 5 x 1 HP HYD-Pump Motor 2 x 1 HP Sub Pump Motor 60 x 2 HP M/B Pump Motor 10 x 1 HP Die cushion Capacity 500 Ton Stroke 0-300 mm Pad Area 3000 x 2000 mm Pump Motor 30 x 1 HP

ID	MA38464
Make	LAEPPLE
Model	ZEH 500
YOM	1983
Condition	Good Condition
Photo	See Photo
Hydraulic Double - Column Press Presskraft / Press Force 500,00 t Hub / Stroke 1180 mm Standerweite / Distance between Columns 2240 mm Mount Height (Hub oben) / Daylight Table - Ram (Stroke up) 1.800 mm Table surface 2050 x 1800 mm Ziehkissenkraft im Tisch / Press Force of Die Cushion in Table 250 t Ziehkissenhub im Tisch / Stroke of Die Cushion in Table 380 mm Ziehkissenfl�che im Tisch / Surface of Die Cushion in Table 1800 x 1200 mm Tischh�he �ber Floor / Table Height above Floor 500 mm Surface of Ram 2215 x 1800 mm Ziehkissenkraft im St��el / Force of Drawing Cushion in Ram 122,00 t Ziehkissenhub im St��el / Stroke of Drawing Cushion in Ram 200 mm Speed ab / Speed Down 400 mm / s Speed Up 10 - 400 mm / s Working Speed 10 - 100 mm / s Drive / Power Requirement 122 + 75 + 64,5 kW Weight 66,00 t Roombedarf (BxTxH) / Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m H�he �ber Floor / Height above Floor 6,80 m

ID	MA38463
Make	LAEPPLE
Model	ZEH 500
YOM	1993
Condition	Good Condition
Photo	See Photo
Hydraulic Double - Column Press Presskraft / Press Force 500,00 t Hub / Stroke 1180 mm Standerweite / Distance between Columns 2240 mm Mount Height (Hub oben) / Daylight Table - Ram (Stroke up) 1.800 mm Table surface 2050 x 1800 mm Ziehkissenkraft im Tisch / Press Force of Die Cushion in Table 250 t Ziehkissenhub im Tisch / Stroke of Die Cushion in Table 380 mm Ziehkissenfl�che im Tisch / Surface of Die Cushion in Table 1800 x 1200 mm Tischh�he �ber Floor / Table Height above Floor 500 mm Surface of Ram 2215 x 1800 mm Ziehkissenkraft im St��el / Force of Drawing Cushion in Ram 122,00 t Ziehkissenhub im St��el / Stroke of Drawing Cushion in Ram 200 mm Speed ab / Speed Down 400 mm / s Speed Up 10 - 400 mm / s Working Speed 10 - 100 mm / s Drive / Power Requirement 122 + 75 + 64,5 kW Weight 66,00 t Roombedarf (BxTxH) / Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m H�he �ber Floor / Height above Floor 6,80 m

ID	MA38421
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY F TON : 500TON Dimensions: table: 2000x1500 mm Built: 220 mm piston diameter 1600 mm Free light under the piston Internal control

ID	MA38397
Make	Dake
Model
YOM
Condition	Good Condition
Photo	See Photo
RAM DIAMETER . 9" STROKE . 16" RAM . 16" X 16" BED . 29" X 29" BETWEEN FRAME UPRIGHTS . 36" PRICED WITH OUT HYDRAULIC POWER UNIT

ID	MA38370
Make	SMG
Model	HZPU500
YOM	1960
Condition	Good Condition
Photo	See Photo \| See Video
Capacity 500 ton Table - width - 2200x1500 mm Slide- width - 2000x1500 mm Slide - adjustable stroke - 800 mm Push points - 2 Approach speed - 500 Working speed at 50% - 40 Working speed 100% - 20 Ascent speed 500 PMS light - 1430 mm Side window between pillars - 800 mm Blank holder cushion - total force - 200 ton Blanking pad - movement (hydraulic/pneumatic/hydropneumatic) Hydraulic Blanking pad - number of pads 4 Blanking pad - retarder Yes Blanking pad - stroke (mm) 300 External dimensions - width (mm) 3300x2500 External dimensions - height above ground (mm) 5500 Weight (tons) 55 Foundation (cm) 2500 Electrical components - n� motors 2 Electrical panel conditions (working, missing, overhauled, to be overhauled) Working Cylinder block valve Yes Mechanical slide block Yes Proportional valves Yes

ID	MA38317
Make	Schuler
Model	HZPU-T 2250-4600-2450
YOM
Condition	Good Condition
Photo	See Photo
Bed Size: 4600 x 2450 mm/ 180'' x 96'' Stroke: 61'' Slide Closing Speed: 1417'' / minute Working Speed Max: 156'' / minute Die Shut Height Minimum: 40'' Installed Power Rating: 1140 HP Hydraulic Operating Pressure: 3760 PSI Total Oil Volume: 4500 Gallon Bolster Thickness: See Drawing Speed: See Drawing

ID	MA38231
Make	Hydrap,Germany
Model
YOM	Retrofit in 2003
Condition	Good Condition
Photo	See Photo
Press force 5000 kN � Ram stroke 500mm � Retraction force 690 kN � Table size 1500mm x1400mm � Ram size 1500mm x1400mm � Cutting impact absorption 5000 kN � Spring tool function up to 200kN � Drawing cushion in press table 2500 kN � Quill hole in table 49 pieces � Distance between quill holes in x and y x=150mm / y=150mm � Ram OT above press table 1250mm � Die cushion force freely programmable 50t-250t and 250t-50t � Press force freely programmable 50-500t Press number 4 � Press force 1600 kN � Ram stroke 500mm � Retraction force 220kN � Table size 1500mm x1200mm � Ram size 1500mm x1200mm � Cutting impact absorption 1600kN � Spring tool function up to 20t � Drawing cushion in press table no � Quill hole in table no � Distance between quill holes in x and y no � Ram OT above press table 1050mm � Die cushion force freely programmable no � Press force freely programmable 50-160t

ID	MA38211
Make	Tianduan
Model
YOM	2017
Condition	Good Condition
Photo	See Photo \| See Video
TABLE 5000 X 3000 MM SPEED TABLE 60-90 MM/S DAY LIGHT 2000 MM STROKE CUSHION 400 MM CUSHION SIZE 4110 X 2010 MM CUSHION PRESSURE 3000 KN STROKE OF SLIDE 1400 MM WORK SPEED 20-110 MM/S POWER 306 KW

ID	MA38204
Make	Schuler
Model
YOM	2001 and 2005
Condition	Good Condition
Photo	See Photo \| See Video
Total press weight: 43500 kg Nominal force: 5000 kN Stroke length: 500 mm Installation space height: 850 mm Closing speed: 450 mm/sec. Working speed: (max.) 55 mm/sec. Working speed at nominal force: 24 mm/sec. Table area: 1300 x 1700 mm Tool height: 350 mm Tool weight: 4000 kg Installed power: 160 kW Hydraulic operating pressure: 255 bar Oil volume: 2700 l

ID	MA38201
Make	Doosan
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
Specification: 3000 mm�1500 mm Capacity: 1200 tons Operating pressure: 290 kg Open: 1900 L Administration: st Electric motor: 6 PX 235 hp

ID	MA38161
Make	Gigant
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Ton 500 Table - x (mm) 2180 Slide - stroke (mm) 950 Table - width (mm) 2180 Frame (H/C) FOUR COLUMNS Conditions WORKING Table - y (mm) 1480 Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) OLEODYNAMIC Slide - x (mm) 2180 Piston rods 2 Slide - y (mm) 1480 Approaching speed 400 Working at 50% speed 38 Working at 100% speed 19 Rising speed 400 Tdc span (mm) 1380 Die cushion - total strength (ton) 200 Die cushion - number of cushions 4 Die cushion - stroke (mm) 390 External dimensions - X (mm) 4400 External dimensions - Y (mm) 3300 External dimensions - height (mm) 4900 Die cushion - motion (hydraulic/pneumatic/hydropneumatic) HYDRAULIC Weight (ton) 30 Foundation (cm) NO Subtype (DM / CDC) FOUR COLUMNS Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) HYDRAULIC Table - depth (mm) 1480 Slide - width (mm) 2180 Slide - depth (mm) 1480 Push points 2 Motor power (kW) 50 Electrical panel conditions (working/missing/complete inspection/inspection required) WORKING Approach speed 400 Light barriers (frontal/posterior) FRONTAL AND POSTERIOR Working speed at 50% 38 100% working speed 19 Ascent rate 400 Light pms (mm) 1380 Blank holder cushion - total force (ton) 200 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) PLUMBER Blank holder cushion - number of cushions 4 Blank holder cushion - stroke (mm) 390 External dimensions - width (mm) 4400 External dimensions - depth (mm) 3300 External dimensions - height above ground (mm) 4900 Motor power (kw) 50 Conections electrical panel (working, missing, overhauled, to be overhauled) WORKING Photocells (front / rear) FRONT AND REAR

ID	MI10505
Make	Dieffenbacher
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Bed 1250 x1850

ID	MI10503
Make	HMT
Model
YOM
Condition	Good Condition
Photo	See Photo
4-Pillar Type Double Action Hydraulic Press Machine Capacity- 400Ton Bed size- 3700mm x 1020mm. Between Pillars- 3250mm Govt. used machine.

ID	MI10495
Make	Vikers
Model
YOM
Condition	Good Condition
Photo	See Photo
3 piller press 800 ton with 225 ton die custion bed size 1250x1000 mm

ID	MA38069
Make	PH HYDRAULICS
Model	4/C
YOM
Condition	Good Condition
Photo	See Photo
Capacity; 500 Ton Bed Area: 60� LR x 42� FB Distance Between Posts: 41� LR x 22� FB Stroke Length: 50� Daylight Opening: 62� Oil Reservoir: 400 Gallon Equipped with: - Light Curtains 3 side metal guarding Dual palm Buttons Allen Bradley Panel View 300 Interface Floor Standing Design Approx Height: 17�6�

ID	MA37991
Make	HPM
Model	C42D
YOM
Condition	Good Condition
Photo	See Photo
Tonnage - 500 Ton Bed & Ram Size - 36�L/R x 36�F/B Stroke - 24� Daylight : 15� - 39� Stroke Per Minute : 5 - 6 SPM Pounds Per Square Inch - 2630 (MAX) Electrics - 575V/3PH/60HZ Approximate Weight - 50,000 LBS Approximate Overall Dimension - 108�L x 102�W x 200�H Equipped With: Hydraulic Type Punch Press, Upgraded Electrics, Upgraded Controller, Palm Push Buttons, Hydraulic Unit, Floor Standing (No Pit Required),

ID	MA37747
Make	Nagase
Model	KNP-150 S S
YOM	1950
Condition	Good Condition
Photo	See Photo
Capacity - 150 Ton Pressurization ability 750 ton Normal pressure 21:22 kg/cm� stroke 600 mm electric motor kw22 die cushion 75 ton Cushion pressure 235 kg/cm� cushion stroke 225 mm

ID	MA37736
Make	Emanuel
Model	DEA400/2000
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Bed Size - 2000x1600 mm

ID	MA37735
Make	Emanuel
Model	DEA640/3200
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity - 640 Ton

ID	MA37734
Make	Muraro
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Table Width - 2700 mm Table X - 2700 Table Y - 1600 Stroke - 900 mm Slide Stroke - 900 mm Electrical components - motor power (kw) - 150 Slide - x 2600 External dimension - height (mm) - 5600 Lateral window - 680 Slide - y 1600 Tdc span 1500 Travola - depth - 1600 Stroke 400 External dimension - weight (ton) 52

ID	MA37733
Make	Emanuel
Model	DEA 500
YOM	1980
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 Ton Bed Width - 2500x1900 mm Slide Stroke - 1000 mm Slide Width - 2500x1900 mm Approach speed - 400 Machine Weight - 60 ton

ID	MA37732
Make	CMB
Model	HZPU500
YOM	1960
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 Ton Table width - 2200x1500 mm Slide - width (mm) 2000x1500 Slide adjustable stroke - 800 mm Push points - 2 Approach speed - 500 Machine Weight - 55 Ton

ID	MA37730
Make	Dongsung
Model	PDH-500-300
YOM	1988
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Stroke - 1300 mm Pressing Speed 13~24.5 mm/sec Open Height 1800mm Slide Area 3000 x 2000 mm Bolster Area 3000 x 2000 (2500 x 1800) Main Motor 75 x 6 kw Die Cushion 200 Ton Die Cushion Stroke 400 mm Die Cushion Motor 19 x 6 kw L/R 5500mm 4400/400 F/R 4000 mm 2500mm H 4800/2200 4750 x 3550 x 3500 mm

ID	MA37648
Make	Sato
Model	CL-400
YOM
Condition	Good Condition
Photo	See Photo \| See Video
H Frame Capacity: 400Tons Stroke: 250mm Bolster Size: 2200 x 1500mm RAM Size: 2000 x 1300mm Die Height: 700mm SPM: 20 ~ 40 WITH DIE CUSHION

ID	MI10135
Make	Muller
Model	BZE 400
YOM	1956
Condition	Good Condition
Photo	See Photo
press type -Hydraulic {single Action} Motor HP -63 kw Ram Tonnage - 400 ton Area of Ram - 98.5" x 63" {2500 mm x1600mm } Area of Bolster -98.5 " x75 " {2500 mm x 1900 mm } Stroke Length -33.5 " {850mm} Cushion type - Hydraulic Cushion Travels - 15.7" { 400mm } Shut Height to Bolster -Max. ;- 63" {1600 mm } Min .:- 29.5" {750 mm }

ID	MI10133
Make	Muller
Model	BZE 450
YOM	1957
Condition	Good Condition
Photo	See Photo
Motor kw - 63 kw ram tonnage -inner -300 ton outer -150 ton Stroke length -Inner -51.5" Outer - 23.5" Shut Height to bolster - Inner Area of Ram - Inner -76" x 37" {1930 mm x 940 mm } Outer -98.5" x 63" {2500 mm x1600 mm } Area of Bolster -98.5" x 63" {2500 mm x1600 mm } Cushion -15.7 {400 mm } Shut Height Bolster - Inner - Max. 65"{1650 mm} Min :23.5" {600mm } Outer - Max.:47" {1200 mm } Min . :23.5" {600 mm}

ID	MI10126
Make	Muller
Model	BZE 154
YOM
Condition	Good Condition
Photo	See Photo
Motor -63 Kw Ram Tonnage -Inner -500 Ton Outer -300 Ton Area of Ram - Inner - 104" X 59" {2640 mm X 1500 mm} - Outer - 126" X 88.5" {3200 mm X 2250 mm} Area of Bolster -126" X 88.5" {3200 mm X 2250 mm} Cushion Travels - 19.7" {500 mm} Stroke -Length - Inner -53" {1350mm } - Outer -31.5" {800 mm} Shut Height to Bolster -Inner - max.:-88.5" {2250mm} min :- 35.5" {900 mm} Outer :- Max.:- 67" {1700 mm } Min . :- 35.5'' {900 mm}

ID	MI10122
Make	Muller
Model	BZE 500
YOM	1956
Condition	Good Condition
Photo	See Photo
Motor -HP -63 kw Ram Tonnage -500 Ton Area 0f Ram -126'' X 78.7" {3200mm x 2000 mm } Area of Bolster -126'' X 88.5" {3200mm x 2250 mm } Stroke Length -35.5" {900 mm} Cushion Travels -15.7" Shut Height -Max = 75.5" {1920 mm} -Min =40" {1020 mm }

ID	MA37611
Make	Hitachi
Model	S4-1000-380-185
YOM	2017
Condition	Good Condition
Photo	See Photo
Capacity -1000 Ton Ability Limit(Subordinate Position) 13mm Stroke Length 800mm Stroke Per Minute 11~18 SPM Die Height 1300 mm Open Height 2100mm Slide Adjust 500mm Slide Size (LR x FB) 3800x1850mm Bolster Size (LR x FB) 3800x 1850x280mm workbench Height 650mm Main Motor 100mm Used Air Pressure 5.5 KG/Cm2 Die Cushion Capacity 120Ton Bad Area 1300 x 650mm Die Cushion Adjust 250mm Adjust Motor 1.5x4 KW/P Used Air Pressure 0~5.5 KG/Cm2 Bolster Capacity 10Ton Transfer speed 10Ton Transfer Motor 1.5x4 mm

ID	MI10111
Make	HMT
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
300 TON BED SIZE 1200�1200 SHUT HEIGHT 1170 STROKE 600 CUSHION YES CUSHION STROKE 200 MM

ID	MI10077
Make	LI Chin
Model	LHD-400
YOM	2004
Condition	Good Condition
Photo	See Photo
TABLE AREA :12001500 OPENING HEIGHT :1200MM RAM STROKE :900 MM MOTOR RPP:504 UP:250 MM DOWN :250 MM PRESSING 10 MM DIE CUSHION CAPACITY :150 MM DIE CUSHION AREA 9001200 DIE CUSHION STROKE

ID	MA37475
Make	HPM
Model	C42D
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Bed & Ram Size 36�L/R x 36�F/B Stroke 24� Daylight 15� - 39� Stroke Per Minute 5 - 6 SPM Pounds Per Square Inch 2630 (MAX) Electrics 575V/3PH/60HZ Approximate Weight 50,000 LBS Approximate Overall Dimension 108�L x 102�W x 200�H Equipped With: Hydraulic Type Punch Press, Upgraded Electrics, Upgraded Controller, Palm Push Buttons, Hydraulic Unit, Floor Standing (No Pit Required), Note: Press Does Not Function, Need To Replace The Hydraulic System,

ID	MA37474
Make	F.G. Shram
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 1500 Ton Bed & Ram Size 192�L/R x 65�F/B Between The Posts 84�L/R x 65�F/B Stroke 24� Daylight 16� - 40� Stroke Per Minute 3 - 4 SPM Pounds Per Square Inch 5000 (MAX) Electrics 460V/3PH/60HZ Approximate Weight 230,000 LBS Approximate Overall Dimension 204�L x 106�W x 260�H Equipped With: Down Acting Hydraulic Type Punch Press, Brand New Electrics, ABB 604 Touch Screen Controller, Upgraded Palm Push Buttons, New Hydraulic Valves, Hoses, Pumps & Motors, Guarding, Floor Standing,

ID	MA37473
Make	Hydraulico
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 1500 Ton Ram & Bed Size 30�L/R x 34�F/B Stroke 12� Open Height 31� Main Cylinder Diameter 45� Side Cylinder Diameter (Each Side) 7� Stroke Per Minute 2 - 3 Pounds Per Square Inch 5000 (MAX) Electrics 575V/3PH/60HZ Approximate Weight 150,000 LBS Approximate Overall Dimension 95�L x 75�W x 162�H Equipped With: Hydraulic Type Punch Press, Foot Pedal, Hydraulic Unit, Push Buttons, Floor Standing,

ID	MI9816
Make	Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 1000 Ton Table Size 3500�2000 mm Slide area 3500 x 2000 mm open height 1600 mm stroke 1300 mm Ram diameter central 560mm

ID	MA37336
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
H-frame one point Capacity - 350 Ton Table dimensions( mm) :1600x1300 Slide dimensions(mm) :1600x1300 Stroke(mm) :600 Light at tdc ( x/mm):1700 Cushion stroke ( mm) :300 Cushion power ( ton) :120

ID	MA37239
Make	COMESSA
Model	PHM 630 T
YOM
Condition	Good Condition
Photo	See Photo
Hydraulic Press with counter Cushion for deep drawn work General Specifications Type - PHM630 T 5920 Dimensions Overall - 8700 mm (H) x 3150 mm (w) x 2800 mm (d) Height Over Floor - 7200 mm Operation Height - 750 mm Weight - 48000 Kg Table Size - 1600 mm x 1300 mm Ram Size - 1600 mm x 1300 mm Distance between Columns - 1656 mm Stroke Press - 800 mm Max Daylight - 1250 mm Stroke Cushion - 400 mm Press Capacity - 630 T Cushion - 100 T Building Year 1980 Refurbishment Year 2001 Voltage 400 V AC Current - 55 KW Phase - 3 Frequency - 50 HZ Hydraulic Oil - Good Quality Hydraulic Oil Tank Capacity 2000 1 Installation Pit -: 1500 mm

ID	MA37184
Make	Asai
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 ton Stroke 900 mm Daylight 1350 mm Bolster 1300 x 1200 mm Slide 1300 x 1000 mm Descending Speed 195 mm/sec Raising Speed 195 mm/sec With Die Cushion Tank 420 Liter Main Motor 30 Kw, 4p

ID	MA37064
Make	Dnepropres
Model	D2243
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 2000 tons, Traverse stroke : 1400 mm, Shut height of stamp distance : 2400 mm, Moving table size : 2000 x 1650 mm, Moving table stroke : 1500 mm, Table height above floor : 0 mm, Ejector force: - Working stroke (up) : 315 tons, - Return stroke (down) : 160 tons, Side ejector force : 20 tons, Press dimensions: - Overall height : 11750 mm, - Right to left : 7000 mm, - Front to back : 5750 mm, Press height above floor : 7900 mm, Press weight : 140 tons.

ID	MA36997
Make	Kanto
Model	HM
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 450 Ton Strock 800mm Table 800 x 1000mm Die cushion 200 ton Die cushion Strock 350 mm

ID	MA36977
Make	Press Master
Model	HFP 250
YOM
Condition	Good Condition
Photo	See Photo
Tonnage - 250 Bore - 12 " Stroke - 16" Rod - 5" Advance Speed - 17 IPM Press Speed - 4 IPM Return Speed - 21 IPM Distance between side frames - 60" Maximum Open height - 32.5" Max L-R travel - 27.75" Oil resevoir capacity - 20 gallons Motor - 10 HP Volts - 480 Phase - 3 Approximate dimensions - 84" x 42 x 94" High Approximate weight - 4800 lbs

ID	MA36952
Make	Wagner
Model	SP1ZO1000
YOM	2006/2019
Condition	Good Condition
Photo	See Photo
Capacity -1000 Ton Refurbishment of the lower bedstead: � Cast steel � Weight of 10,600 Kg and dimensions of 3500 x 3174 � 1050 Moun�ng on boring machine with balancing and geometric and dimensional checks � Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) � Dressage of inferiors and superiors � Retouching of 2 sides with 0340H7 and �330H7 (mini) � Retouching of 4 sides with 0125H7 � Retouch in the center 0170H7; 0220; 0260H7 � Surfacing 2 side plates 360 x 240 with dimensions of 320. Supply and machining of 4 guiding columns � Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned � Central threads and external thread � The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained a�er retouching on the lower windchest and the upper yoke. Repair of the mobile crosspiece (slider) � Dimensions of the slider: To be defined (no plan in our possession) � Material: Cast steel � Assembly, balancing and geometric check � Resump�on of the 4 lines of guide rings and the support surface � Support face of the Table with an es�mated weight of 10,000 Kg Refurbishment of the upper bed base � Cast steel � Weight of 13,600KG and dimensions of 2500 x 1900 x 1900 + Moun�ng on boring machine with balancing and geometric and dimensional checks In � Retouching of the 4 lines of bores with 0305/307 (Rework of a maximum of 1mm/radius A: 4 Cheek dressing Ob � Resump�on of the central bore at 0760H7 and depth 510 with the bearing face at 01000/760 ) � There is Minimum retouch of the rear guide at 0460; 430 with the support face at 0900/460. REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements

ID	MA36951
Make	Erfurt
Model
YOM
Condition	Good Condition
Photo	See Photo
Press force: 1000 t Installation height: 900 -1,200 mm, ram stroke: 1,500 mm, ram adjustment: 300 mm, Ejection force: max. 30 t, ejector stroke: 300 mm, Sliding table: 4,000 x 2,500 mm operating unit

ID	MI9461
Make	K.K
Model	8T200
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 Tons

ID	MA36949
Make	Ravamac
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 250 tons Table: 1400 x 880

ID	MA36948
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Power: t. 300 Dimensions 3000 X 1500 X 4950 (height) Dimensions of the Table 3000 X 1500 column 2530 X 1130 Distance max upper positions 2500 lower position 1100 max travel 1400

ID	MA36946
Make	Kawasaki
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 1000 ton Stroke 110 mm Daylight 1800m Bolster 4400 x 2200 mm Slide 4400 x 2200 mm Raising Speed 350 mm/sec Lowering Speed 350 mm/sec Working Speed 75 - 30 mm/sec Die Cushion 350 ton Cushion Stroke 650 mm

ID	MA36941
Make	Ogihara
Model	HR2515
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity -750 Ton table 1250 x 2250mm strock 900mm ,daylight 1200mm

ID	MA36817
Make	Billaud
Model	BA300/100C
YOM
Condition	Good Condition
Photo	See Photo
Force of ram by working: 300T at 250bars Ajustable pression: from 25 to 250 bars Ram stroke: 800mm Force by rising: 40T Force of die cushion: 100T at 300bars Adjustable pression: from 30 to 300bars Die cushion stroke: 400 mm Ram approaching speed: 150mm/sec Ram working speed: 20mm/sec Return speed: 120mm/sec Bar ejector in the ram adjustable stroke: 300mm Working table area: 1400x1000m Die cushion table area: 850x650mm Ram base area: 1300x 900mm Length between guides: 1100mm Length between uprights: 1550 mm Max opening at high dead center between ram and working table: 1400mm Weight of the machine without oil: 26T Pump: 120 l/min Motor: 80 HP

ID	MI9129
Make	Prince
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
2. CAPACITY FOR TONS-300 3. FUNCTION OF MACHINE-DEEP DRAW 4. TABLE SIZE- LEFT / RIGHT - 1200 MM FRONT / BACK - 1805 MM 5.MACHINE SIZE- LEFT / RIGHT - 1655 MM FRONT / BACK - 1805 MM HEIGHT - 3940 MM 6. MOTOR HP-30HP 7. PRESSURE CAPACITY-230 KG 8. POWER SUPPLY- 3-440 VOLTS 50 C/S

ID	MI9091
Make	HMT,India
Model	H4s-1000-400-200T CH003
YOM
Condition	Good Condition
Photo	See Photo
Bed Size: 4000 x 2000mm Day Light: 1200mm stroke: 800mm main ram rapid approach speed: 300mm/sec Height of bed over floor: 400mm No of axis: 4 (Beam,Cushion,FM & BM)

ID	MA36614
Make	Dongsung Metal
Model
YOM	2012
Condition	Good Condition
Photo	See Photo
Power Capacity: 3,750KG Pressure: 350Kg/cm Main Cylinder Stroke: 2000mm Open Height: 3000mm Bolster Size: 4830 x 2800mm Power Capacity: 240.000Kg Pressure: 235 Kg/cm

ID	MA36613
Make	Hankook Hydraulic
Model
YOM	2013
Condition	Good Condition
Photo	See Photo
Side Frame Type Hydraulic Press Press Power:10,000 Tons Press Pressure: 3000Bar/max Slide Stroke: 1200mm/max Press Cylinder size: Dia 1200 x 1200T(w-Type)- 2 set Dia 1200 x 1200T(s-Type) - 1set Slide open area: H=2500 x L7000 W1500 Bed Area: L=7200mm x W2440mm Press Frame out size area:2440 x 9800 x 10240 Hydraulic Pump: High=142Lx2 Low=142L x 2 E,Motor: 100HP x 6P x 380V-2 High Speed: 0-100mm/sec Pressing speed: 4.2mm/sec- 2.8mm/sec Up Speed: 26mm/sec.

ID	MA36607
Make	Lasco
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 800 Ton 1100 mm stroke 25 ton ejector force 50 ton ram return force 1100 x 1100 mm ram area 750 mm ejector stroke 1120 x 1100 mm table area 1150 mm distance between guidings 2 x 200 kW main drive 96 ton total weight Pressing speed at Fmax should be around 85,2 mm/ sec Complete and installed but not under power anymore

ID	MA36586
Make	NKK Mori
Model	MSF-600A
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Stroke 200 Bolster Size 500 � 1000 Slide Size 500 � 1000 Open Height 500

ID	MI8992
Make	Barani
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size: 1800 x 1500 Daylight Height:800mm

ID	MI8991
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size: 17 x 17 inches Dept of Draw: 5

ID	MI8990
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size: 17 x 17 inches. Dept of Draw:5

ID	MI8989
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size: 17 x 17 inches Dept of Draw:7

ID	MI8887
Make	Komatsu
Model	E4S600MB
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 600 T, Stroke: 750 mm, SPM: 18 & 12 Die Height: 1620 mm, Bolster Area: 3400 mm * 2000 mm * 300 mm, Slide Area: 3400 mm * 2000 mm, Slide Adjustment: 400 mm, Main Motor: 95/63 kw. With Die Cushion:- Capacity: 120 Ton, Stroke: 300 mm

ID	MA36361
Make	Kojima,Japan
Model	PWH-2200
YOM	1994
Condition	Good Condition
Photo	See Photo
Forcing Power: Inner: 60-120, Outer:320-1600, single:440-2200 Commercial Capacity:Max 241Kg/cm2 STROKE: Inner:1350mm,Outer:1200mm, Single:1200mm Daylight:Inner:1950mm, Outer:1200mm, Single:1200mm Slide area: Inner:1650 x 700mm, Outer: 3200 x 1800mm, single: 3200 x 1800mm. Bolster area: 3200 x 1900mm Lifting capacity: Max 75 Ton/Max 150 Ton Die Cushion: 100-500 Die cushion stroke:Max 450mm Die cushion Pad:2000 x 1275mm Tank Capacity:3200 Litres.

ID	MI8698
Make	Birdsboro
Model	A-822
YOM
Condition	Good Condition
Photo	See Photo
4-posted Hydraulic Press. Tonnage: 1500 Ton Distance between Columns: 34" x 34" (863 x 863) maximum Open: 40" Platen size: 68" x 32" (1727mm x 812mm)

ID	MA36277
Make	Lasco
Model	VPE630-750
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity - 630 Ton Press capacity increased from 630t to 750t by Lasco obtained by the modification of the hydraulic equipment. Adjustable admissible force: 200 to 750t Stroke: 630mm Distance table/ram: 1250mm HDC � 620mm LDC Way between uprights: 1000mm Table: 980x1000mm Ram: 950x1000mm Working speed: at 200t 200mm/s � 200t to 630t 100mm/s � 630t to 750t 81mm/s

ID	MA36243
Make	Hydrotek
Model
YOM
Condition	Good Condition
Photo	See Photo
Capcity - 2000Ton lifting - 80Ton Cushion - 700 Ton Cushion Lifting - 35 Ton Length of Day Light - 2500mm stroke Main 2000mm Cushion 500mm working Pressure main 253cm Cusion 236cm Descending 200 mm / 250 sec speed pressing 2000mm 500ton sec ascending 150/190 mm/sec Cushion ascending 50/80 mm/sec bolster Arla 6000 x 2500mm Moving Bolster Geared motor drive Moving speed 40/60 mm/sec Geared motor 55 KW Moving Stroke 2550 mm Cushion pad area 5000 x 1600mm Hyd Pump 550 L/mm Main Motor 160KW Oil tank capacity 3600 liter operation method manual power voltage AC380V 30 60 Hz

ID	MA36206
Make	Schuler
Model	HH-1600-325x16
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity -1600Ton No. of manufacture: P/100006-01 Total press weight: 175,000 kg Nominal force: 1600kn maximum stroke: 1300mm Daylight ; 2050MM slide closing speed: 590mm/s working speed max: 41mm/s working speed at Nominal force: 16mm/s die area max(L-RXF-B) 3150x1500mm at nominal force (L-RXF-B) 1200x800mm die shut height min : 750mm Total weight of die: 25000kg weight of upper die:10000 kg admissible off centre load(L-R) 800knm admissible off centre load(F-B) 400knm Installed power rating: 490kw nominal current: 800A voltage:440V, Frequency: 60HZ, Hydrailic operating pressure: 282 Bar Total oil volume: 8900 litres Oil Type: HLP 46 Nach DN51524, Airpressure: Bar

ID	MA36203
Make	Muller
Model
YOM
Condition	Good Condition
Photo	See Photo
Nominal Force : 1000kN Maximum SPM : 12 1/min Maximum Shut Height : 1600mm Manimal Shut Height : 720mm Maximum slide stroke : 900mm Bolster Dimension : 3200mm x 2250mm T-Slot in Bolster : T36 H12 DIN650 Draw cusion Stroke : 500mm Draw cusion force : 4000kN Draw Cushon dimension : 60mm Ram Dimension : 3450mm x 2250mm T Slot in Ram : T36 H12 DIN650 Tool is Manipulated by : Forklift Max. Tool weight : 7000kg Forks Size/Pitch : 150x70/1510mm Lower Die clamp height : 70mm Upper Die clamp height : 70mm

ID	MA36195
Make	Emanuel
Model	DEA640/3200
YOM
Condition	Good Condition
Photo	See Photo
Type : DEA 640/3200 Ram capacity -640 Ton Slide stroke 1000 mm Max shut height 1.800 mm Table size 3200 x 2000 mm Fast stroke 400 sec/mm Cushion capacity 250 Ton Cushion stroke 400 mm Ground up to floor 5800 mm Distance btw uprights 4700 mm Lateral window 2450 mm Weight 110.000 kg

ID	MA36193
Make	coming
Model	600
YOM	1996
Condition	Good Condition
Photo	See Photo
MODEL TYPE : ID600 CONTROL KINEMATICS: Hydraulic. DRIVE KINEMATICS CAPACITY : 600 Tons. RATED CAPACITY PUSH POINTS : N�1 NUMBER of connecting rods SLIDE STROKE : 800 mm. SLIDE STROKE VERTICAL CLEARANCE from the die carriage, CBRA : 410 mm. Min. Max. 1210 mm SHUT HEIGHT, from top of bolster, SDAU STROKE lower cushion : 400 mm. Extraction lower cushion TABLE DIMENSION : 2.200 x 1.400 mm. TABLE DIMENSIONS BOTTOM SPARK PLUG PITCH: 100 mm. Lower extraction step MOLD CARRIAGES QUANTITY: not present NUMBER of MOVING BOLSTERS MOLD CARRIAGE MOVEMENT : Not present MOVING BOLSTER EXIT MOLD CARRIAGE HEIGHT: 700 mm. MOVING BOLSTER HEIGHT MAIN DIMENSIONS-MAIN DIMENSIONS MAXIMUM HEIGHT from FLOOR EDGE: na. MAXIMUM HEIGHT from FLOOR LEVEL OPENING between THE UPRIGHTS front (right-left): n.d CLEARANCE BETWEEN UPRIGHTS (L-R) OPENING between THE SIDE UPRIGHTS (front-rear): Not present. CLEARANCE BETWEEN UPRIGHTS (F-B) MAXIMUM WEIGHT OF THE PRESS : n.d MAXIMUM PRESS WEIGHT STATE OF THE PRESS in storage disassembled THE STATE OF THE PRESS

ID	MA36190
Make	Muraro
Model	ID500/250
YOM	2001
Condition	Good Condition
Photo	See Photo
TYPE: ID500/250 ram capacity 500 ton-tr slide stroke 900mm max shut height 1500mm table size 2700mm x 1600mm cushion capacity 250 tons cushion stroke 400mm ground up to floor 5.600mm distance between uprights n.d.mm lateral window n.d.mm weight n.d.kg

ID	MA36189
Make	Gigant
Model	G2-1500/2
YOM	1997
Condition	Good Condition
Photo	See Photo
Total Press Power: 1500 Ton. Top Board Stroke: 1500 mm Max. light between the Tables: 2500 mm Light between the Uprights: 4520 mm 1� Sliding Table Dimensions: 4500 x 2500 mm Step Hole: 200 mm 2� Sliding Table Dimensions: 4500 x 2500 mm Step Hole: 150 mm Upper Table Dimensions: 4500 x 2500 mm Step Hole: 150 mm Lower Cushion Type: N�6 PL 1000/850/G5 Max. Power: 720 Ton Max. Stroke: 850 mm Lower Cushion Size: 4100 x 2100 mm Upper Cushion Type: Max. Stroke: 300 mm Max. Power: 150 Ton Upper Cushion Size: 3450 x 1950 mm Max. Dimensions Size: 6980 x 2970 x 8220 mm (floor plan)

ID	MA36187
Make	Emanuel
Model	DEA400/2000
YOM
Condition	Good Condition
Photo	See Photo
ram capacity 400 ton slide stroke 1.100 mm max shut height 1.600 mm table size 2.000 x 1.600 mm fast stroke sec 650mm cushion capacity ton 160 cushion stroke 400 mm Ground up to floor 5.800 mm Distance btw uprights 3.400 mm lateral window 1.600 mm

ID	MI8442
Make	Morane Somua
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -800 Ton 1400x1400 mm Table

100

ID	MA36159
Make	Cavenaghi & Ridolft
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -300 Ton DA1650X1200 PLANS ALL OPEN LIGHT 1150 CYLINDER STROKE 1100 DIAM 400 APPROX HP60 MAIN ENGINE REWARDS 300+ STEEL SHEET WITH 4 CYLINDERS GO DOWN QUICKLY, SLOW DOWN PRESS AND RETURN FAST LOVELY PAINT THE MACHINE WAS IN FUNCTION, SEE VIDEO COMPLETE WITH VARIOUS CARTERS COMPLETE MACHINE WITH USE AND MAINTENANCE BOOKS, ELECTRICAL AND HYDRAULIC DIAGRAMS VERTICAL, OILED AND STARTED DIMENSIONS 2500X1500X H4800+1000 MOTOR +270 TOTAL SHEET PRESS H 6070 WEIGHT 27 TON VERTICAL, OILED AND STARTED adjustable closing force 30/300 Ton moving floor travel 1100 mm maximum opening between floors 1150mm useful dimensions of the plane 1600 x1200 light between uprights 1650 closing force 150 Ton hurry up 600mm useful dimensions of the plane 1550 x1100 force 26,5 Ton race 150 mm pump motor 60 HP auxiliary engines 5 HP approach speed 2400m/min working speed at 40% max pressure 204 m/min working speed at 60% max pressure 138 m/min working speed at 80% max pressure 096m/min working speed at 100% max pressure 072 m/min opening speed 2070mm basis 2400 x1580mm Height 5400mm maritime cubage weight 35,5 the hydraulic extractor -III effect - can be mounted on request

101

ID	MA36156
Make	Schuler
Model	HZPU400-1250
YOM	1963
Condition	Good Condition
Photo	See Photo
Capacity -400 Ton Stroke - 900mm Speed - 400 mm/sec Cushion -125 Ton Cushion Stroke - 400mm Max Shut height - 1500mm Table Size - 1250 x 1000 mm Total Output - 70 hp Weight - 30000 kg Width - 2600mm Height - 2100mm Depth - 6500mm Light between columns - 1250mm Table level from the ground - N/D Side window - N/D

102

ID	MA36155
Make	Lasco
Model	VPE400
YOM	1975
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Model - VPE400 SO Stroke - 450mm Table Size - 1200 x1000 mm Ram Size - 1150 x 1000 mm Engine Power - 75 kW Total Weight - 25000 kg

103

ID	MA36145
Make	Benag
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -250Ton � 2 UPRIGHTS � 2 studs � EXTRACTOR - extractor � LIGHT BETWEEN SHOULDERS 950 � light between shoulders 950 � STICK 850 X 850 � ram 850x850 � LIGHT BETWEEN TOP AND TOP WITH MACHINE COMPLETELY CLOSED 1350 � Light between table and table-ram ( machine all close) 1350 � RAM STROKE 1300 � ram stroke 1300 � CENTRAL CYLINDER DIAM. 250 � central cylinder diam.250 � HEAT EXCHANGER � heat exchanger � FRONT CARTER WITH SAFETY MICRO � front carter with safety micro � LARGE 2300 - DEPTH 1300-HIGH - measures

104

ID	MA36141
Make	Emanuel
Model	DEA250
YOM	1983
Condition	Good Condition
Photo	See Photo
CAPACITY -250 TON Max. Blank Holder Reaction 70 Ton Upper Extractor Boost 5 Ton Approach Speed 650 mm Full Power working speed 36 mm Half Power working speed 60 mm Ram Back Speed 550 mm Blank Holder Back Speed 150-300 mm Ram Stroke 800 mm Blank Holder Stroke 300 mm Upper Extractor Stroke 200 mm Ram Size 1600 x 1300 mm Table Size 1600 x 1300 mm Blank Holder Size 1450 x 1050 mm Side Windows Size - 600 x 1000 mm Base Height 840 mm Installed Power - 110 kW Width 2900 mm Height 5100 mm Depth 1700 mm Light Between Columns NA Table Level from the Ground 700 mm

105

ID	MA36084
Make	Amino
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 650Ton Stroke : 1300mm Daylight : 2330mm Bolster : 2500mm x 1800mm Die Cusion : 200ton Cusion Stroke : 275mm Pad Size : 1900mm x 1200mm

106

ID	MI8415
Make	LI Chin
Model	LHD-400
YOM	10/2006
Condition	Good Condition
Photo	See Photo
Capacity : 400tons Ram Stroke : 900mm Table Area : 1200mm x 1500mm Open Height : 1200mm UP : 250mm/sec DOWN : 250mm/sec Motor : E-50HP X4PHPXP Pressing : 10mm/sec Die Cusion Capacity : 150ton Die Cusion Area : 900mm x 1200mm Die Cusion Stroke : 350mm

107

ID	MA35986
Make	Fagor
Model
YOM	2018
Condition	Good Condition
Photo	See Photo \| See Video
Controls: PLC SIEMENS Simatic TouchControl Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm * Press Design :- frame design H-frame openings in uprights yes moving bolster yes * Press forces :- total force (nominal) 2500 to * Press Table :- clamping surface (left-right) 5000 mm clamping surface (front-back) 3000 mm Table height over floor 820 mm * Ram:- clamping surface (left-right) 5000 mm clamping surface (front-back) 3000 mm stroke 1800 mm Ram (Hydr.Press):- number of main-cylinders 4 approximation velocity max. 490 mm/s working velocity max. 17 mm/s return velocity max. 250 mm/s Cushion in ram :- force of cushion 350 to stroke 200 mm clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes * Die Cushion (table cushion) :- force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes * Tool Assembly Dimensions:- distance between columns (H-frame) 5050 mm * Tool Assembly Dimensions:- distance table - ram max. 2700 mm * Electrical specification :- total power consumption 565 kW mains voltage 400 V mains frequency 50 Hz *Dimensions/weights:- height above floor level 10750 mm total weight approx. 500000 kg light barrier yes hydraulic overload protection yes Technical description- -Hydraulic press equipped with: - front moving bolster, - draw cushion in the table - cushion inside the ram, - 16 hydraulic tool clamping units, - two hydraulic cylinders for " out of center pressure " compensation - Siemens HMI touch control, - ideal for tryout of tools. - max. rapid speed of ram 490 mm/sec - ram and table deflection accuracy 0,125 mm/m.

108

ID	MA35842
Make	Cosmos
Model	PA186
YOM	1982
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton MAX. STROKE:400 mm DISTANCE TABLE / RAM:400 mm TABLE AREA:1000x900 mm Max. APPROACH SPEED:150 mm/s ELECTRIC VOLTAGE:220V 3 phase HEATING PLATE:YES MOTOR:30 KW DIMENSIONS: WIDTH:2300 mm DEPTH:1800 mm HEIGHT: 4500 mm WEIGHT OF PRESS:18T

109

ID	MA35821
Make	Lasco
Model	VPE315
YOM	1999
Condition	Good Condition
Photo	See Photo
Capacity: 315 ton, Stroke: 400 mm, Daylight: 1100 mm, Table size (left to right): 900 mm, Table size (front to back): 1100 mm, Ram (left to right): 800 mm, Ram (front to back): 1100 mm, Approach speed: 350 mm/s Pressure speed at 100 t: 100 mm/s Return speed: 350 mm/s Return force: 20 t, Lower ejector (force): 10 t, Lower ejector (stroke): 150 mm, Driving power overall: 130 kW, Electrics: 230 V / 50Hz, Dimensions: 1800 x 1500 mm, Height of machine above floor: 3735 mm,

110

ID	MA35783
Make	Banning
Model	OVA315
YOM
Condition	Good Condition
Photo	See Photo
Capacity:315 ton Drive capacity: 110 kW, Stroke: 320 mm, Daylight: 900 mm, Table size (let to right): 1000 mm, Table size (front to back): 1000 mm, Approach speed: 550 mm/sec, Pressure speed at F max: 72 mm/sec, Return speed; 550 mm/sec, Driving power overall: 117/380/50 kW/V/Hz Dimensions: 3600 x 1700 x 2100 mm, Total weight: 7,5 t

111

ID	MA35782
Make	Sutherland
Model
YOM	2002
Condition	Good Condition
Photo	See Photo
300 Ton Capacity 19.68" Stroke (500 mm) 27.56" Daylight (700 mm) 60" LR x 48" FB Bed & Slide Work Area T-Slotted (1525 mm X 1220 mm) 63-1/2" LR x 33" FB Opening Between Post 78" LR x 48" FB Bed Base Equipped With Allen-Bradley SLC5/03 CPU Operator Palm Stand T-Slotted Bed & Slide Motor, Electrics & Hydraulics Level Pads 50 HP Main Motor 263 Gallon Hydraulic Oil Tank 480V / 60 Hz / 3 PH Catalog Specifications Closing Speed 250 mm/sec Return Speed 250 mm/sec Pressing Speed 12 mm/sec Approx. Dimensions 72" F-B x 86" LR x 204" H Estimated Weight 48,000 lbs Clean, Painted, & Cycled!

112

ID	MA35769
Make	Eumuco,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
315 ton pressing force 40 ton return force 120 mm /sec speed at max force 470 mm / sec speed approach 500 mm / sec speed return 500 mm stroke 1130 mm shutheight (ram up) 1000 x 770 mm ram (depth x width) 1000 x 770 mm table (depth x width) 8 ton ejector force 150 mm / sec ejector speed approx. 250 mm ejector stroke approx. 1x 200 kW & 1 x 90 kW main drive 315 bar pressure 1900 l oil volume 28 ton total weight.

113

ID	MA35760
Make	A-Jin
Model
YOM
Condition	Good Condition
Photo	See Photo
- Capacity: 600 ton - Table size: 2200x1200mm - Stroke: ( press down ):900mm - Cushion stroke: 450mm - Cylinder Dia: 320mm (x2) - Main power: 55kw - Machine dimension (LxWxH)3500x2300x6000mm

114

ID	MA35759
Make	Korean
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton - Table size: 1500x1500mm - Stroke: ( press down ):700mm - Cushion stroke: 350mm - Cylinder Dia: 415mm - Machine dimension (LxWxH) 2800x1800x4800mm - Main power: 47kw

115

ID	MI8224
Make	DEEP ludhiana
Model
YOM
Condition	Good Condition
Photo	See Photo
capacity- 600 Ton Machine hight - 4500mm width- 2400mm strokes length - 510mm shut hight - 250 mm Ram size - 10001230mm Bed size - 12601520 mm

116

ID	MA35740
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 Ton HYDROPOWER MOD. COLUMNS TYPE

117

ID	MA35739
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton Table: 1400 x 880 Strokes per minute: RAVAMAC Blows per minute: RAVAMAC Center overhang MT: 07/81 Adjustable stroke: 250 Distance plane - 250 club Slide 1000 Hp 20

118

ID	MA35738
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500T table: 2000x1500 mm Built: 220 mm piston diameter : 1600 mm Free light under the piston Internal control

119

ID	MA35737
Make	Lien Chien
Model	LD2700
YOM	1990
Condition	Good Condition
Photo	See Photo \| See Video
Capacity:500 ton, Table: 3500x1800 mm Stroke: 500 mm

120

ID	MA35736
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 Ton Dimensions 3000 X 1500 X 4950 (height) Dimensions of the tables 3000 X 1500 passage between the columns 2530 X 1130 Max distance upper positions 2500 lower positions 1100 max travel 1400

121

ID	MA35584
Make	Pacific
Model	200
YOM	1998
Condition	Good Condition
Photo	See Photo
Tonnage capacity 200 TON Stroke length 12" Open height 20" Closed height 8" Window dimensions 24" X 14" Bolster bed area 102" X 48" Bolster slide area 96" X 48" Ram speed, rapid advance 308 IPM Ram speed, fast press (45-tons) 146 IPM Ram speed, normal press 49 IPM Ram speed, rapid return 289 IPM 200 TON PACIFIC STRAIGHT-SIDE HYDRAULIC PRESS NEW 1998, SERIAL NO A-1455, MODEL 200 OBL-8/48 EQUIPPED WITH: ALLEN BRADLEY SLC500 PLC W/PANELVIEW COLOR SCREEN AUTOMATIC CENTRALIZED LUBRICATION SYSTEM EXTRA WIDE BED AND SLIDE (48" IN LIEU OF 36" STD) FLOOR MOUNTED DESIGN Platen height above floor 41" Motor horsepower 40 HP Electrical system 460/3/60

122

ID	MA35575
Make	Verson
Model	400-HD1-20-4P
YOM
Condition	Good Condition
Photo	See Photo \| See Video
400 TON VERSON 4-POST DOWN-ACTING HYDRAULIC PRESS SERIAL NO 9273, MODEL 400-HD1-20-4P, EQUIPPED WITH: 4-POST DESIGN DOWN-ACTING 25 HP OILGEAR HEAVY DUTY HYDRAULIC SYSTEM (TYPE PESB-203) Tonnage capacity 400 TON Stroke length 8" Daylight space bed to bolster, stroke up 28" Shut height bed to bolster, stroke down 20" Bolster area, l-r x f-b 38.75" X 20.25" Platen area, l-r x f-b 26" X 20.25" Distance between rods, l-r 20.25" Distance between rods, f-b 20.25" Pressing speed 17 IPM Rapid return speed 228 IPM Hydraulic motor, horsepower 25 HP Floor space, l-r x f-b 50" X 58" Overall height, approximateley 120" Weight approximately 29000 LBS

123

ID	MI8016
Make	Indian
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
800 Ton Hydraulic Machine Machine Capacity: 800 ton Booster Plate: 1000 mm x 1000 mm. Day Light: 530 mm Shut height : 480 mm Power Pack motor: 50 hp Machine Dimension: Width � 2030 mm, Length � 1200 mm Height: 5 meter (from ground to top), 3 meter (from ground to bottom depth) Power Pack Size: 1085 mm x 975 mm

124

ID	MI7913
Make	HMT,India
Model	H4S
YOM
Condition	Good Condition
Photo	See Photo
Bed Size : 4000x2000mm Daylight: 1200mm Stroke : 800mm Main RAM Rapid Approach Speed - 300mm / sec Pressing Speed - 133mm/sec Main Ram Return Speed : 300mm/sec Height Of Bed Over floor : 400mm No of Axis - 4 ( Beam , Cushion , FM&BM) app.wt. of press :- 165 tons max stroke :- 800

125

ID	MA35145
Make	CMB
Model	HPU 1000-1800/1150
YOM	1982
Condition	Good Condition
Photo	See Photo
Total force 1000 ton Slide retraction force 590 kN Ram stroke 400 mm Distance table / ram 1200 mm Ram surface (width / depth) 1800/1150 mm Clear width between the uprights 1810 mm Table clamping surface (width / depth) 1800/1150 mm Table ejector force 800 kN Table ejector stroke 125 mm Table ejector surface (width / depth) 1260/700 mm Drive power 90 kW Pump output 360/1500 l/min, U/min Rapid speed (down / up) 400/244 mm/s V max . 16/23, 5/47 mm/s V nominal pressure 8.5/13/25 mm/s Ram � ejector hydr. (number / stroke) 1 x 50/2000 mm/kN Plunger pad area (width / depth) 1250/760 mm

126

ID	MA35141
Make	Heungjun Hydraulic Co.,Ltd.
Model	HHP-1000-A1
YOM	2019
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 1000 ton Stroke : 1000 mm Open height : 1650 mm Bolster area : 2800 x 1500 mm Slide area : 2800 x 1500 mm Down speed : 200 mm/s Pressing speed : 10 mm/s Return speed : 200 mm/s Main motor : 75 Kw

127

ID	MA35064
Make	Kojima,Japan
Model
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity: 2200 tons Stroke: 1200 mm Daylight:1800 mm Slide:3200 x 1800 mm Moving Bolster:3200 x 1900 mm Moving Bolster Stroke:2500 mm Moving Bolster Speed:100 mm/sec Die Cushion:100 - 500 ton Cushion Stroke:450 mm Cushion Pad:2000 x 1275 mm Cushion Pin:50 mm dia Slide descending speed:235 mm/sec Hydraulic Tank:3200 litre

128

ID	MI7869
Make
Model
YOM
Condition
Photo	See Photo
Table :-2000 x 1400 mm shut Height:- 1000 die chusion:- 100 T motor 25 HP approx. weight 45 T

129

ID	MI7868
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
500 Ton Table:- 1200 x 1200mm Shut Height 1000 MM Die chusion 80 t motor :- 25 HP

130

ID	MI7859
Make	Hindustan Hydraulic
Model
YOM
Condition	Good Condition
Photo	See Photo
1000 Ton table :- 1500 x 1500 MM shut height :- 1500 MM with dia cusion

131

ID	MA34948
Make	Laufer
Model	RA500
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton Table: 1350x1100mm with Decoiler lifting capacity up to 5t and Straightening machine WANZKE HRS 3 / S EF- No. 1694-1: - the maximum width of the sheet is 800mm, - the maximum thickness of the sheet is 3mm. All accessories with the press, all these devices work using the CNC control

132

ID	MA34930
Make	Dieffenbacher/Russian
Model	PHP-600
YOM	1995
Condition	Good Condition
Photo	See Photo
CAPACITY : 600TON

133

ID	MA34929
Make	Litostoy
Model	HVO-2-600
YOM	1984
Condition	Good Condition
Photo	See Photo
CAPACITY : 600TON

134

ID	MA34928
Make	Litostoy
Model	HVO-2-500
YOM	1999
Condition	Good Condition
Photo	See Photo
CAPACITY : 500TON

135

ID	MA34927
Make	Litostoy
Model	HVO-2-400
YOM	1990
Condition	Good Condition
Photo	See Photo
CAPACITY : 400TON Table : 1600 x 1600 mm Ram stroke : 1000 mm

136

ID	MA34902
Make	Hesa
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 350 ton, TABLE : 1940 X 1300 MM DIMENSIONS CUSHION : 1800 X 970 MM POWER CUSHION : 175 TM CARRERA MAXIMA DE LA CORREDERA: 950 MM CARRERA MAXIMA DEL PLATO COJIN :365 MM BETWEEN COLUMS : 1950 MM POWER : 75 CV OIL TANK CAPACITY: 2000 L

137

ID	MA34825
Make	Ogihara
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Capacity : 600 ton Upward capacity : 60 ton Stroke : 1500 mm Daylight : 2000 mm Downward speed : 300 mm/sec Upward speed : 300 mm/sec Table : 3500 x 2000 mm Table Stroke : 2500 mm Die cushion Capacity : 200 ton Cushion stroke : 300 mm Pad Size : 2700 x 1480 mm Upward speed : 80 mm/sec Downward speed : 80 mm/sec Pumps Main hydraulic pump : 315 kg/cm2 Sub Pump : 140 kg/cm2 Pilot Pump : 70 kg/cm2 Oil Cooler Pump : 5 kg/cm2 Motors Main motor : AC 400V - 300 Kw - 8P (2) Sub Motor : AC400V - 55 Kw - 4P Pilot Motor : AC400V - 7.5 Kw - 4P

138

ID	MI7803
Make	Wellman
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY : 500TON, (740*740)mm 500MT Hydraulic press bed size, Motor- 90kw and 11kw

139

ID	MA34818
Make	Ogihara
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Capacity:800 ton Upward capacity:80 ton Stroke:1800 mm Daylight:2300 mm Downward speed:400 mm/sec Upward speed:400 mm/sec Table:3500 x 2300 mm Table Stroke:3000 mm Table Speed:100 mm/sec Die cushion: Capacity:300 ton Cushion stroke:300 mm Pad Size:2650 x 1600 mm Upward speed:80 mm/sec Downward speed:80 mm/sec Pumps Main hydraulic pump:270 kg/cm2 Sub Pump:170 kg/cm2 Pilot Pump:100 kg/cm2

140

ID	MA34767
Make	Amino
Model	SDP-1500-400-450-270
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity : 1500 tons Upward capacity : 80 ton Stroke : 1800 mm Daylight : 2500 mm Slide : 4500 x 2700 mm Table : 4500 x 2700 mm Die cushion Capacity : 40 - 400 ton Cushion stroke : 300 mm Pad Size : 3550 x 1900 mm Pumps Main hydraulic pump : 260 kg/cm2 Pilot Pump : 120 kg/cm2

141

ID	MA34706
Make	Ogihara
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Capacity : 1000 ton Upward capacity : 87 ton Main Cylinder : 420 mm x 250 x 1820 (2) Main Cylinder : 280 mm x 280 x 1820 (1) Stroke : 1800 mm Daylight : 2500 mm Downward speed : 725 mm/sec Upward speed : 725 mm/sec Table : 4500 x 2500 mm Table Stroke : 3700 mm Table Speed : 130 mm/sec Die cushion Capacity : 250 ton Cushion stroke : 0 - 300 mm Pad Size : 3550 x 2050 mm Upward speed : 150 mm/sec Downward speed : 60 mm/sec Pumps Main hydraulic pump : 315 kg/cm2 Sub Pump : 140 kg/cm2 Pilot Pump : 70 kg/cm2 Oil Cooler Pump : 5 kg/cm2 Motors : Main motor : AC 400V - 300 Kw - 8P (2) Sub Motor : AC400V - 55 Kw - 4P Pilot Motor : AC400V - 7.5 Kw - 4P

142

ID	MA33674
Make	CMB
Model	HZPUI1600
YOM	1991/1976
Condition	Good Condition
Photo	See Photo
Forces: Slide Force max. (kN) 16.000 Retraction Force (brutto) approx. (kN) 7.200 Cushion force max. (kN) 10.000 Dimensions: Slide Stroke (mm) 600 Cushion Stroke (mm) 475 Distance Bolster � Slide in TDC (mm) 1.500 Bolster above Floor with foundation (mm) 800 Bolster/Slide width (mm) 2.200 Bolster/Slide depth (mm) 1.500 Cushion width (mm) 1.950 Cushion depth (mm) 850 Daylight between uprights left/right approx. (mm) 2.210 Daylight between uprights front/back approx. (mm) 1.000 Table 1500 x 2000 mm Total height above floor approx. (mm) 6.600 Electrical Power: Main Motor capacity approx. (kW) 110 Velocities: Fast speed downward max. (mm/s) 300 Working speed max. approx. (mm/s) 24 Working speed at nominal force approx. (mm/s) 6 Fast speed upward max. (mm/s) 250 Control SNG Numerik D4 Loading system

143

ID	MA33396
Make	Russian
Model	SPC400
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Main cylinder: 400 ton two lateral 200t each

144

ID	MA33386
Make	Stenhoj
Model	FPS-200-T
YOM	New 2018
Condition	Good Condition
Photo	See Photo
Press force:20-2000 kN Press speed:24 mm/sec Approach speed:5 mm/sec Return speed:34 mm/sec Return power max:200 kN Length of stroke:900 mm Max daylight: 1500 mm Max tool width:800 mm Total height:3800 mm Total width:1600 mm Hole diameter, press flange:4 x �22 mm Height press flange:52 mm Diameter, press flange:� 260 mm EXTRACTOR CYLINDER: Press force:400 kN Length of stroke:400 mm Press speed:9 mm/sec Return speed:14 mm/sec PUMP AND RESERVOIR: Motor power, 3 x 400 V, 50 C:11 KW Reservoir capacity:275 litres PLC: SIEMENS PLC S-7 Touch Screen control Equipped with Light guard.

145

ID	MA33385
Make	Hydroform
Model	TFK-500-250-50
YOM	New 1985
Condition	Good Condition
Photo	See Photo
Main press power:500 tons Cushion power: 250 tons Triple power: 50 tons Main cylinder stroke: 800 mm Table size: 2100 x 1100 mm Passage front/rear: 2300 mm Passage side/side: 700 mm Machine weight: 48 tons Approx machine dimensions: Height over floor: 5200 mm Total height: approx. 6200 mm Width: 3200 mm Length (front to rear): 3100 mm (incl oil reservoir)

146

ID	MA33346
Make	Chinese
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton Hydraulic maximum working force:25 Mpa, Working stroke:700 mm, Maximum opening: 1100 mm, Pressure of stripper cylinder: 100 KN Stroke of stripper cylinder: 150 mm, Pressure of lower cylinder: 630 KN, Stroke of lower jacking cylinder: 450 mm, Work bench effective size: 600 x 600 mm, Fast descent speed: 40 mm/s Working speed: 20-30 mm/s Return speed: 100 mm/s Machine power: 11 Kw, Plunger pump size: 63 YCY M1/r

147

ID	MA33345
Make	Chinese
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 65 ton Hydraulic maximum working force:25 Mpa, Working stroke:600 mm, Maximum opening: 1000 mm, Pressure of stripper cylinder: 100 KN Stroke of stripper cylinder: 150 mm, Pressure of lower cylinder: 630 KN, Stroke of lower jacking cylinder: 450 mm, Work bench effective size: 600 x 600 mm, Fast descent speed: 40 mm/s Working speed: 20-30 mm/s Return speed: 100 mm/s Machine power: 7.5 Kw, Plunger pump size: 63 YCY M1/r

148

ID	MA33333
Make	Chinese
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton, Hydraulic maximum working force:25 Mpa, Working stroke:600 mm, Maximum opening:850 mm, Working force of lower cylinder: 200 KN, Stroke of lower jacking cylinder: 250 mm, Workbench effective size: 800 x 800 mm, Fast descent speed:100 mm/s Working speed: 20-30 mm/s Return speed: 110 mm/s Machine power:7.5 Kw Plunger pump size: 40 YCY Ml/r

149

ID	MA33332
Make	Chinese
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 65 ton, Hydraulic maximum working force:25 Mpa, Working stroke:500 mm, Maximum opening:700 mm, Working force of lower cylinder: 200 KN, Stroke of lower jacking cylinder: 250 mm, Workbench effective size: 700 x 700 mm, Fast descent speed:100 mm/s Working speed: 20-30 mm/s Return speed: 110 mm/s Machine power:5.5 Kw Plunger pump size: 25 YCY Ml/r

150

ID	MA33284
Make	Chinese
Model	YD65-150
YOM
Condition	Brand New
Photo	See Photo
Rated force of main cylinder: 1000KN, Stroke of ram: 550 mm, Max. work pressure: 20 Mpa, Return Force: 60 KN, Rated force of lower cylinder: 500 KN, Max. pressure of lower cylinder: 20 Mpa, Rated pressure of ejector: 15 Mpa, Effective area of working table:700 x 800 mm, Height between ram and table: Max: 850 mm, Min: 300 mm, Pressing speed: Unloading: 250 mm/s Working: 12/25 Return: 250 mm/s Stroke of lower cylinder: 265 mm, Stroke of ejector:220 mm, Motor power: 15 KW, Machine weight: 5000 Kg, overall dimensions: H: 3500 mm, RL: 1880 mm, FB: 1350 mm

151

ID	MA33283
Make	Chinese
Model	YD65-130
YOM
Condition	Brand New
Photo	See Photo
Rated force of main cylinder: 850 KN, Stroke of ram: 550 mm, Max. work pressure: 20 Mpa, Return Force: 60 KN, Rated force of lower cylinder: 450 KN, Max. pressure of lower cylinder: 20 Mpa, Rated pressure of ejector: 12 Mpa, Effective area of working table:600 x 600 mm, Height between ram and table: Max: 850 mm, Min: 300 mm, pressing speed: Unloading: 250 mm/s Working: 12/25 Return: 280 mm/s Stroke of lower cylinder: 265 mm, Stroke of ejector:220 mm, Motor power: 15 KW, Machine weight: 4500 Kg, overall dimensions: H: 3250 mm, RL: 1800 mm, FB: 1210 mm

152

ID	MA33207
Make	Safan
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1000 t x 6000 mm

153

ID	MA33029
Make
Model	P7640
YOM
Condition	Good Condition
Photo	See Photo
Its own weight is 10 tons; the distance between the table and the slider is 340 mm .; main engine power - 7.5 kW; table size - 485 mm. * 680 mm .; dimensions of the machine - 4000 mm. * 1175 mm. * 2240 mm.

154

ID	MA33007
Make	Muller
Model
YOM	1974
Condition	Good Condition
Photo	See Photo
Built in ejector ram, Table: 1000 x 700 mm, Daylight: 700 mm, Base size: 86" x 48" x 10 ft high, Approximate weight: 8000 kg, c/w books, manuals & drawings

155

ID	MA31778
Make	TMP Voronezh Russian
Model	K2035
YOM
Condition	Good Condition
Photo	See Photo
Cold forging press with 1200 mm stroke. Capacity: 315 ton, Drive capacity: 132 kW, Stroke: 1200 mm, Stroke rate: 15 min^-1, Shut height: 780 mm, Table size (left to right): 800 mm, Table size (front to back): 780 mm, Ram (left to right): 390 mm, Ram (front to back): 400 mm, Dimensions: 3450 x 3350 mm, Height of machine above floor: 6715 mm, Total weight: 42 ton Press is an new to be completed with motor and electrics

156

ID	MA28544
Make	Lasco
Model	VP250
YOM
Condition	Good Condition
Photo	See Photo
Press Capacity : 250 ton, Ram stroke : 300 mm, Daylight : 630 mm, Table size (left to right) : 620 mm, Table size (front to back) : 600 mm, Ram (left to right) : 600 mm, Ram (front to back) : 600 mm, Approach speed : 550 mm, Pressing speed : 65 mm, Return speed : 550 mm, Return force : 25 t, Distance between table and ram : max 700 mm, Driving power : 75 kW, Oil quantity : ~ 600 l, Total Weight : 12 t.

157

ID	MA28543
Make	Banning
Model	OVA250
YOM
Condition	Good Condition
Photo	See Photo
Press Capacity : 250 ton, Ram stroke : 400 mm, Daylight : 900 mm, Table size (left to right) : 700 mm, Table size (front to back) : 750 mm, Approach speed : 550 mm, Pressure speed at 0-105 t : 65 mm, Pressure speed at 105-250 t : 160 mm, Return speed : 550 mm, Return force : 12 t, Driving power : 75 kW / 380 V / 50 Hz, Working pressure : 250 bar, Oil quantity : 1.300 l, Machine Weight : 10,5 t.



from	to

from	to
Apply Filter

VKengg.co.in

Category : Sheet Metal

Sub-Category : Press Hydraulic