V. K. Engineering - Buying & Selling of Machines made easy

Category : Sheet Metal

Sub-Category : Press Sheet Stamping Hydraulic

Total Machines Found : 72

Select

| Machine Details

1

ID	MA39586
Make	Muller Gefrees
Model
YOM
Condition	Good Condition
Photo	See Photo
Modernization: 2016 Control: Simatic S7 ( All electric/electronic installation new, electric box, optical barrier as well) Force: 160T Table size width/depth: 1000 x 1000 mm Clearance: 1050 mm Slider/cylinder stroke: 550 mm Cushion force: 40 T Dimensions press (height x width x depth): 5400-2540-1800 mm Weight: 24 tons

2

ID	MA39585
Make	Lasco
Model	FP222S
YOM	1962
Condition	Good Condition
Photo	See Photo
Modernization up to actual requirements: 2022 � New Control: Simatic S7 ( All electric/electronic installation new, electric box, optical barrier as well) Force: 200T Table size width/depth: 970 x 1600 mm Clearance: 900/1320 mm Slider/cylinder stroke: 690 mm Cushion force: 40 T Dimensions press (height x width x depth): 5500-3200-2300 mm Weight: 56 tons

3

ID	MA39584
Make	Lasco
Model	TSP160S
YOM	1969
Condition	Good Condition
Photo	See Photo
Modernization: 2023 Control: Simatic S7 ( All electric/electronic installation new, electric box, optical barrier as well) Force: 160T Table size width/depth: 1200 x 800 mm Clearance: 820 mm Slider/cylinder stroke: 650 mm Cushion force: 80 T Dimensions press (height x width x depth): 5039-1450-1570mm Weight: 22 tons

4

ID	MA39057
Make	Tianduan
Model	YTC34-1200
YOM	2017
Condition	Good Condition
Photo	See Photo
5000 X 3000 MM TABLE 60-90 STROKES/MIN 2000 MM DAYLIGHT CUSHION 400 MM STROKE 4110 X 2010 MM CUSHION SIZE POWER OF SUPPLY : 400V 50Hz POWER KW : 306kw RETURN FORCE : 1600KN SLIDE STOKE : 1400mm FAST RETRUN : 460m/s WORKS SPEED : 20-110 mm/s CUSHION PRESSURE : 3000KN SPEED OF WORKTABLE : 60-90 mm/s MAX WORKING OIL PRESSURE : 250 BAR FAST DOWN: 500mm/s DAYLIGHT : 2000mm STROKE OF CUSHION : 400mm ENERGY TIME RESPONES : 190 MS

5

ID	MA36853
Make	ONA PRES
Model	EMd-200-5-AQ
YOM	2007
Condition	Good Condition
Photo	See Photo
● DOUBLE SIDED CONSTRUCTION WITH THREE CYLINDERS ● TWO LATERAL MOVING BOLSTER WITH EXIT ON BOTH SIDES ● BED CUSHION AND RAM CUSHION ● PLC SIEMENS SIMATIC TOUCH PANEL ● FRONT AND SIDE SAFETY BARRIERS REGULATIONS AND �UE� MARKING MAIN TECHNICAL DATA: PRESSURE POWER: 2.000 TN (20.000 KN) ● RETURN POWER: 208 TN (2.080 KN) DISTANCE BETWEEN UPRIGHTS (FRONTAL): 5.100 MM ● LATERAL WINDOWS SIZE: 3.300 MM DAYLIGHT, MIN-MAX: 900 � 2.700 MM MOVING BOLSTERS NUMBER: 2, DIMENSIONS: (2) 5.000 X 3.000 MM TRAVEL OF DISPLACEMENT: 7.605 � 8.350 MM ● DISPLACEMENT SPEED: 100 MM/SEC. RAM DIMENSIONS: 5.000 X 3.000 MM ● ADJUSTABLE STROKE: 1.800 MM SPEEDS: APPROXIMATION SPEED: 300 MM/SEC. WORKING SPEED WITH 1 CYLINDER: UP TO 4.430 KN: 105 MM/SEC ● OP TO 6.650 KN: 69 MM/SEC WORKING SPEED WITH 2 CYLINDERS: UP TO 8.800 KN: 52 MM/SEC ● UP TO 13.300 KN: 34 MM/SEC WORKING SPEED WITH 3 CYLINDERS: UP TO 13.200 KN: 35 MM/SEC ● UP TO 20.000 KN: 23 MM/SEC RETURN SPEED: 330 MM/SEC TOOLING CAPACITY: MAX.DIMENSIONS: 4.800 X 2.800 X 1.800 MM ● MAX.WEIGHT IN RAM: 30.000 KGS MAX.WEIGHT ON THE BOLSTERS: 60.000 KGS RAM CUSHION: PRESURE POWER: 200 TN (2.000 KN) NUMBER OF CYLINDERS: 4 ● CUSHION STROKE: 200 MM ASCENT SPEED: 50 MM/SEC ● TABLE CUSHION SIZE: 4.300 X 2.500 MM BED CUSHION: PRESURE POWER: 400 TN (4.000 KN) NUMBER OF CYLINDERS: 5 ● CUSHION STROKE: 400 MM ASCENT SPEED: 63 MM/SEC ● TABLE CUSHION SIZE: 4.300 X 2.500 MM MOTORS: MOTORS, TOTAL POWER: MACHINE DIMENSIONS & WEIGHT: APPROX. MACHINE DIMENSIONS (WITHOUT TABLES): 6.800 X 5.265 MM MACHINE HEIGHT OVER FLOOR: 9.982 MM FLOOR SPACE REQUIRED INC. THE DISPLACEMENT OF THE BOLSTERS: 22.650 X 5.500 MM MACHINE WEIGHT (WITHOUT TABLES): 390.000 KGS WEIGHT OF THE MOVING TABLES: 2 X 27.650 KGS EACH APPROX.TOTAL WEIGHT: 445.300 KGS PIT DIMENSIONS (ACCORDING THE MANUFACTURER): WIDTH: 7.530 X DEPTH: 5.500 MM EXCELLENT CONDITION USED ONLY FOR TOOL TRYOUT

6

ID	MA36267
Make	CMB
Model	HBP200-2000
YOM	construction 1986 - conversion 2000
Condition	Good Condition
Photo	See Photo
Capacity -200 Ton Pressure force 200 tons. Distance between front columns 2050 mm Column passage laterally 2030 mm Table surface 2800 x 2000 mm Ram area 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 ton. Rapid advance speed 500 mm/s Press speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Engine power main engine 75 kW Motor power control pump 11 kW Mains connection 380 volts, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - Adjacent control cabinet - 2-hand control panel on the right - ground level installation - Central lubrication - User manual with wiring diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons.

7

ID	MA36058
Make	Fritz Muller/Esslingen
Model
YOM	1971 / 1998 refurbished with control Siemens S7
Condition	Good Condition
Photo	See Photo \| See Video
Pressure 1000 tons Table size : 3500 x 2200 mm Distance between table and ram: - min approx. 400 mm max. approx. 1580 mm Drawing cushion in the table with a stroke of 500 mm and a counterforce of 300 tons Machine Dimensions : 6000 x 2500 mm Height 8500 mm ( above Floor). Basement depth (for hydraulics and other aggregates): approx. 5000 mm Machine Weight: approx 220 tons

8

ID	MA35641
Make	HPM
Model	HD52-150-60
YOM	2003
Condition
Photo	See Photo
MAXIMUM TONNAGE - 150 TONS BED AREA (LEFT-RIGHT X FRONT-BACK) - 1702 MM X 1524 MM RAM AREA - 1524 MM X 1524 MM OPEN HEIGHT - 622 MM CLOSED HEIGHT - 292 MM STROKE LENGTH - 330 MM HYDRAULIC PUMP MOTOR - 75 H.P. APPROXIMATE SHIPPING WEIGHT - 56,800 LBS. EQUIPPED WITH: ALLEN BRADLEY PANEL VIEW 300 CONTROL PEDESTAL MOUNTED PUNCH BUTTON CONTROLS 440 VOLT, 3 PHASE, 150 AMPS. HALATECHNIK BLANKING STROKE DAMPER SYSTEM BANNER LIGHT CURTAIN ON REAR OF PRESS UNISORB SHOCK PADS NOTE: INSPECT IN OUR PHILADELPHIA PA WAREHOUSE

9

ID	MA35605
Make	Loire Safe
Model	FSSMC-1500/12/14-6
YOM	2006
Condition	Good Condition
Photo	See Photo
Capacity - 1500T Stroke - 600 mm Shut Height - 800 mm Ram Area - 1200 x 1200mm Table Area - 1200 x 1200mm Distance Between Column - 1300 mm Max. Space Between Ram / T - 1400 mm Approach Speed max. - 350 mm/s Work Speed max. - 77 mm/s Return speed max. - 350 mm/s Main unit Electric Power - 4 x 110 KW Bimanual & Pedal Control Dimension Width - 2570 mm Depth - 2460 mm Height Above the Ground - 5975 mm Approx, weight - 80T

10

ID	MA35559
Make	Kawasaki
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Capacity: 500 tons Slide stroke: 600 mm die height Max: 1400 mm Table dimensions: -Length: 2100 mm -Width: 2100 mm Main motor power : 45kw

11

ID	MA35558
Make	Kobelco
Model
YOM	1992
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 350 ton Slide of Stroke : 600mm Die height: 1000mm Bed size: 1350X1100mm Motor 37kw Cushion : 150 ton

12

ID	MI8035
Make	Press Master
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size :- L-2500 MM / W-1500 MM Shut Height :- Max-900 MM / Min-600 MM Stroke :- 500 MM Cushion Layout :- 150 x 150 MM Cushion Stroke :- 200 MM (AB) Power Requirements in HP :- 60 HP Cushion Area :- 800 x 1600 MM Slide Adjustment :- 300 MM Cushion Area :- 800 x 1600 MM 6 ROW FB/LR

13

ID	MA35437
Make	Loire Safe
Model	EDIM800/320/28-20/19-16 CE
YOM	1996
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Stroke: 1600 mm, Power supply: 220 v, Full load current: 810 (A), Main motor: 2x 356 Cut of current: 1000, Weight without tolling: 85000 kg, Tool max weight & dimensions: 2800 x 1700 x 1100 mm 20,000 kg, Approach speed min/max: 400 mm, Working speed: max:42.7 mm/s min: 5. mm/s Stopping time: 140 safety distance: 280 mm, Water flow at 20 degree c: 124 min Pneumatic supply: 5 bar

14

ID	MA35133
Make	Kojima,Japan
Model	HSP-1500
YOM	1998
Condition	Good Condition
Photo	See Photo
Max force : 1500 T Cushion force : 300 T Stroke length : 1500 mm Cushion stroke : 300 mm Daylight : 2200 mm Mobile table dimensions : 4000 x 2500 mm Cushion dimensions : 3250 x 1900 mm type :- Hydraulic Operating RAM speed :23 mm/s Working speed of the RAM by piston forc� :1500 Tn Operating RAM speed (max) :120 mm/s Working speed RAM : 500 Ton Return speed : 590 mm/s

15

ID	MA35122
Make	Siempelkamp,Germany
Model
YOM	2003
Condition	Good Condition
Photo	See Photo
Capacity: 1600 Ton. Working speed : 500 mm/sec Force hydroforming 3.500 Ton Stroke : 1.350 mm Moving bolster :3.150 mm x 1.900 mm Cushion : Force : 400 Ton. Total weight : 420 Ton.

16

ID	MA34995
Make	Muller
Model
YOM
Condition	Good working condition
Photo	See Photo
Capacity:700 Ton Number of pistons:2 Table dimensions X-Y:4000 x 2200 Slide dimensions (x-y):4000x2200 Stroke:1400 Light at tdc:1920 Cushion Power:400 Ton Stroke:500 mm

17

ID	MA34990
Make	Muller
Model
YOM	1998
Condition	Good working condition
Photo	See Photo
Capacity:400 Ton Table dimensions X-Y:2600 x 1400 Slide dimensions (x-y):2600x1400 Stroke:800 Light at tdc:1100 Cushion Power:160 Ton Stroke:200 mm

18

ID	MI7843
Make	Kbeera
Model
YOM
Condition	Good Condition
Photo	See Photo
Only 1yr used Capacity: 400 ton Main Ram stroke -300 mm Bed size 1000*1000mm Shut height: 650mm 10spm

19

ID	MI7842
Make	OKK,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity :300ton Stroke: 450mm Die height :700mm Adjustment :200mm Table size: 2100*1500mm SPM: 18 With die cushion Weight: 45ton

20

ID	MA34669
Make	CMB
Model
YOM	1987
Condition	Good Condition
Photo	See Photo
H-frame hydraulical press one piston Power ( ton ) : 630 Table dimensions ( x-y/mm) : 2500x1500 Slide dimensions ( x-y/mm): 2500x1500 Stroke ( x/mm) :600 Light at tdc ( x/mm) : 1350 Cushion power ( ton ) : 180 Cushion stroke ( mm) : 200

21

ID	MA34274
Make	Muller
Model
YOM
Condition	Good Condition
Photo	See Photo
H-frame press Two pistons Power ( ton ) 500 Table ( x-y/mm) : 2500x1900 Table ( x-y/mm) : 2500x1900 Corsa ( x/mm) :1000 Light at tdc ( x/mm) :1800 Cushion power : 250 ton Cushion stroke (mm) :300

22

ID	MA34196
Make	Rovetta,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
H-frame hydraulical Power ( ton ) : 1500 Table ( x-y/mm) : 2200x1500 Table ( x-y/mm) : 2200x1500 Corsa ( x/mm) :1000 Light at tdc ( x/mm) :1550 Cushion power : 600 ton Cushion stroke (mm) :300 Moving bloster

23

ID	MA33958
Make	NAMYANG (Korea)
Model	NHP-1000
YOM	2013
Condition	Good Condition
Photo	See Photo
Pressing capacity: main: max.1000 ton, Lifting: max.60 ton, Ejector: max. 50 ton, Side: max. 1000 ton Working pressure: Main: max. 300 kg/cm2 Lifting: max. 300 kg/cm2 Ejector: max. 130 kg/cm2 Open height: main: 2000 mmm, Stroke: Main: 1500 mm, Ejector: 300 mm, bolster size: 1800 x 1700 Operation: manual and automatic Speed Descending: 220~250 mm/sec, pressing (pump): 34 mm/sec, pressing (ACC): 150 mm/sec, Ascending: 220~250 mm/sec, Ejector ascending: 120~150 mm/sec Hydraulic cylinder: dia 660 x st. 1500 x 1set, Hydraulic pump: K3VG280DT x 4set Electric motor: 200 kw x 6P x 4 set, Control: PLC control Power source- main: AC 380V (60Hz) Control: AC 110V (60Hz) Sol: DC 24 V (60 HZ) & AC 220 V Oil tank capacity: 10,000 l

24

ID	MA33825
Make	Sutherland
Model	HD1-600-43-67
YOM	New 2001
Condition	Good Condition
Photo	See Photo
Capacity: 660 ton, Floor standing Area of bed (nominal): 43" L-R x 67" F-B Area of slide (nominal): 43" L-R x 67" F-B Stroke of 8 point gib guided slide: 0 - 15" maximum Daylight opening (total): 19" maximum Main ram diameter: 22.3"/21.3" @ 3430 PSI - 660 tons Floor to top of bed: 41" Power unit (top of press): Denison hydraulic pump, driven by 150 HP 1180 RPM 230/460/3/60 motor Speeds approx.: 600"/minute closing 45"/minute pressing to 660 tons 600"/minute return Controls: Pushbutton operation with stroke & pressure control Dual palm buttons All press functions controlled via PLC Weight approx. 52,000 lb. Overall dimensions approx. 108" L-R x 108" F-B x 200" H

25

ID	MA33740
Make	Kawasaki
Model	REF86
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Stroke: 1200 mm, Daylight: 1500 mm, Bolster: 2500 x 2000 mm, Descending speed: 200 m/sec

26

ID	MA33730
Make	Dnepropetrovsk,Russia
Model	DA2243
YOM	1967
Condition	Good Condition
Photo	See Photo
Rated force, kN 20,000 Slider stroke, mm 1400 Distance between table and slider, mm 2400 Main engine power kW 62 Table size width / length mm 1650/2000 Machine dimensions Length Width Height (mm) 7000_5750_7900 Weight kg 140,000

27

ID	MA33008
Make	WMW,Zeulenroda
Model	PYE250S1
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton, Working pressure of 200 kg / cm2, A speed of movement of the piston, down - 200 mm / sec Up - 110 mm / sec, Stroke - 500 mm, Depth (from the front kai on the table to the shell) - 360 mm, The maximum distance between the table and the upper clamping plate - 800 mm, Total weight - 8 tons, No tipping device, Operating temperature 10-45 degrees C, Kind of current - 3H, AC / 50 Hz, Control voltage - 60 volts, Power consumption - 20,5 kW, Rated current - 41 A.

28

ID	MA32912
Make	Inoue
Model
YOM
Condition	Good Condition
Photo	See Photo
Stroke : 1200 mm Daylight : 1600 mm Moving Bolster : 2500 x 2200 mm Slide : 2500 x 2200 mm Lowering Speed : 200 mm/sec Working Speed : 8.8- 19.0 mm/sec Raising Speed : 163 mm/sec Die Cushion : 200 ton Cushion Stroke : 400 mm Cushion pad : 2000 x 1600 mm Motor : 220V 55 KW 6P Main Pump : 1150 rpm

29

ID	MA32659
Make	Russian
Model	PO443
YOM	1988
Condition	Good Condition
Photo	See Photo
Capacity tons: 2000 Nominal liquid pressure, kg/cm�: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000

30

ID	MA32593
Make	LCM
Model	LDB1-2000-250
YOM	2008
Condition	Good Condition
Photo	See Photo
Capacity: 2000 ton, Table: 2600 x 1600 mm.

31

ID	MA32216
Make	Inoue
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton Stroke: 1200 mm Open Height: 1600 mm Moving Bolster: 2500 x 2200 mm Lowering Speed: 200 mm/sec Die Cushion: 80 ton Cushion Stroke: 300 mm

32

ID	MA31933
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Nominal Power :200 ton Height closed die :900 mm Fixed stroke slide: 700 mm Dimension table: 1300 x 1000 mm Dimension ram: 1300 x 1000 mm Light between uprights : 1350 mm Max distance table � ram (PMS): 1000 mm Bottom cushion: 1 Stroke rod extraction: 250 mm Max extraction top cammes: 190 mm Overall dimension : 2400 x 1500 x 5000 h

33

ID	MA31932
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Nominal Power: 200 ton Height closed die: 900 mm Fixed stroke slide: 700 mm Dimension table: 1300 x 1000 mm Dimension ram: 1300 x 1000 mm Light between uprights: 1350 mm Max distance table � ram (PMS):1000 mm Bottom cushion:1 Stroke rod extraction:250 mm Max extraction top cammes :190 mm Overall dimension: 2400 x 1500 x 5000 h

34

ID	MA31879
Make	Schuler
Model	HH-1600-325x16
YOM	2005
Condition	Good Condition
Photo	See Photo
Total Press Weight: 175,000 kg Nominal Force: 16,000 kg Maximum Stroke: 1,300 mm Daylight: 2,050 mm Slide Closing Speed: 590 mm/s Working Speed Max: 41 mm/s Working Speed at Nominal Force: 16 mm/s Die Area Max(L-RxF-B) 3,150 x 1,500 mm Die Area Min at Nominal Force(L-RxF-B): 1,200 x 800 mm Die Shut height Min.: 750 mm Total Weight of Die: 25,000 kg Weight of Upper Die: 10,000 kg Admissible Off-Center Load(L-R): 800 kNm Admissible Off0 Center Load(F0B): 400 kNm Installed Power Rating: 490 kw Nominal current: 800 A Voltage: 440 V Frequency: 60 Hz Hydraulic Operating Pressure: 282 bar Total Oil Volume: 8,900 L Oil Type: HLP 46 nach DIN 51524 Air Pressure: Remark: Hydro-forming press used in automobiles to product a chassis( engine, cradle, cross member, etc) body(mainly used in trucks and road vehicles), and emission system( muffler, valve)

35

ID	MA31860
Make	Muller Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Force :2.000 Ton. Stroke :1.200 mm Day light :2.350 mm Distance between the columns :4.600 mm Table : 4.500 mm x 2.200 mm Slide dimension :4.500 mm x 2.200 mm Lateral windows :2.300 mm x 1.500 mm Cushion on the slide Force :100 Ton. Stroke :150 mm Cushion on the table Force : 300 Ton. Stroke : 300 mm Accessories :rapid device for moving die

36

ID	MA31823
Make	Kawasaki
Model
YOM
Condition	Excellent condition,under power
Photo	See Photo \| See Video
Capacity: 1200 ton Stroke: 1300 mm Die Height: 2000 mm Bolster: 4500 x 2000 mm Slide: 4500 x 2000 mm Raising Speed: 350 mm/sec Lowering Speed: 350 mm/sec Working Speed: 75 - 30 mm/sec Die Cushion: 350 ton Cushion Stroke: 650 mm

37

ID	MA31821
Make	Fritz Muller/Esslingen
Model
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity: 600 ton, Table about: 1600 x 1000 mm, Ram stroke: 900 mm, Motor power: 90 kW, Length x Width x Height: 2700 x 4800 x 8000 mm, Weight: 88000 kg

38

ID	MA31740
Make	Osaka Jack Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke: 500 mm, Daylight: 900 mm, Bolster: 1500 x 950 mm, Slide: 1500 x 750 mm, Descending speed: 43.9 mm/sec, Working speed:7.3 mm/sec, Raising speed:110.0 mm/sec

39

ID	MA31727
Make	Inoue
Model	WSF-400
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Stroke: 800 mm, Bolster: 2200 x 1570 mm, Descending speed: 100 mm/sec

40

ID	MA31706
Make	Siempelkamp,Germany
Model
YOM	2003
Condition	Excellent condition,under power
Photo	See Photo
Capacity : 400 Ton. Force deep drawing:1600 Ton. Working speed :500 mm/sec Force hydro forming: 3.500 Ton Stroke : 1.350 mm Moving bolster :3.150 mm x 1.900 mm Total weight : 420 Ton.

41

ID	MA31673
Make	Ogihara
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton, table: 4500 x 2500 mm, Daylight: 2500 mm, Stroke: 1800 mm, Shut height: 700 mm, Main cylinder: 420 x 250 x 1820 mm (2) 280 x 200 x 1820 mm (1) Table load:40 ton, Table stroke: 3700 mm, Table speed: 130 mm/sec, Lowering speed: 725 mm/sec, Raising speed: 725 mm/sec, Working speed 0-185 ton: 350 mm/sec, 185-749 mm: 140 mm/sec, 749-1000 mm : 60 mm/sec, Die cushion : 250 ton, Cushion stroke: 0-300 mm, Cushion raising: 150 mm/sec Cushion lowering: 60 mm/sec, Hydraulic tank: 5000 liters, Main motor: AC400 V-300 Kw- 8 p (2) Weight: 210 tons

42

ID	MA31541
Make
Model	PA2634
YOM
Condition	Good Condition
Photo	See Photo
Nominal press force, tf 250 Nominal fluid pressure, kgf / cm2 200 The greatest course of the traverse, mm 710 Traverse speed, mm / s at idle 63 when working with the return stroke 63 The smallest distance between the working surfaces of extrusion plates, mm 600 The distance between the columns in the light, mm left - right 1000 front - back 800 Dimensions of shtampa plate, m left - right 990 front - back 910 The thickness of the plate, 125 mm The height of the working surface of the shtampovoy plate above the floor, mm 1000 Ejector force hydraulic for isothermal stamping PA 2634, ton-force top 25 bottom 25 Ejector stroke, mm top 100 lower 250 Overall dimensions of the press, mm left - right 2250 front - back 2020 height 5685 height above floor level 5520 Mass of the press, kg 23 200

43

ID	MA31535
Make	Russian
Model	PA2638
YOM	1980
Condition	Good Condition
Photo	See Photo
capacity: 630 kN, 800 table size width/ length 1120/1250 mm, Long width height: 2580-2180-6900 mm, Weight: 50,000 kg

44

ID	MA30927
Make	USSR
Model
YOM
Condition
Photo	See Photo
Make : YZTM, USSR/Russia Specifications: Press max effort 4000 t - internal ram max effort 3000 t, - external ram max effort 1000 t, Max cold punching effort 2000 t, Movable table size 5500x6000 mm, Central ejector effort 900 t, Side ejector effort 100 t, Distance between columns: - on loading side 5900 mm, - on control side 4100 mm, Max distance between table and ram 3750 mm, Internal ram stroke per one stroke of the multiplier 400 mm External ram stroke per one stroke of the multiplier 530 mm Rams up/downstroke speed, max 20 cm/sec, Pressing speed, max 10 cm/sec, Table travel speed 20 cm/sec, Overall dimensions WxL 25250x15500 mm, Height over/under floor 13370/7500 mm, Weight 1323.7 t 1. The Press has 1 main cylinder, 1 cylinder ejector (lower) 2 presser cylinders, 4 cylinders lift the body and including a dozen smaller auxiliary cylinders (lock multiplier etc.). 2. The Pressure unit is max. 200 bar. There are 4 units - 2 original USSR and 2 mentioned a few years ago, my f-PRATISOLLI (Italy), also pressure max. 200 bar. 3. The pumps are equipped with two engines and two 75kW motors 110kW for a total drive power of 370KW. During normal operation work max. 2 pumps, the rest are the reserve. 4. The position control is equipped with a manual and foot control spool valves, gauges pressure reading in various places of power, lights to indicate activation of individual pumps and circuits. Control of the press performed by an experienced employee with midfielders controlling the movement of work from different locations

45

ID	MI6829
Make	ISGEC
Model	HP.350.3800 x 1400
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 350 ton, Stroke: 700 mm, Daylight: 1400 mm, Working pressure: 250 kg/cm2

46

ID	MA30313
Make	Kojima,Japan
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 1500 ton, Stroke : 1600 mm, Daylight : 2200 mm, Bolster : 4000 x 2500 mm, Slide Speed : 245 mm/sec, Pressing speed at 500 ton : 39.5 - 70 mm/sec, Pressing speed at 1500 ton : 15.2 - 23 mm/sec, Die Cushion (High Pressure) : 100 - 500 tons, Die Cushion (Low Pressure) : 14 - 70 tons, Cushion Stroke : 600 mm, Cushion Pad : 3510 x 2060 mm.

47

ID	MA30199
Make	Kongo
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 1000 ton, Stroke : 1200 mm, Daylight : 1600 mm, Adjust : 430 mm, Bolster : 2500 x 1500 mm, Slide : 2500 x 1500 mm.

48

ID	MA30001
Make	Muller
Model	BZE1600-35
YOM	2011
Condition	Good Condition
Photo	See Photo
Capacity : 1600 ton, Worktable : 3500 x 2750 mm, Upper ram dimensions : 3500 x 2570 mm, Distance between worktable/ram : 2350 mm, Inner slide travel : 1400 mm, Inner slide capacity : 1000 ton, Blank holder travel : 1000 mm, Blank holder capacity : 600 ton, Cushion travel : 250 mm, Cushion capacity : 200 ton, Control unit : Siemens. Weight : 380000 kg. With face moving bolster; Columns side opening 800 x 900 mm.

49

ID	MA29872
Make	Lien Chieh
Model	LHS-3000
YOM	1997/Retrofitted in 2007
Condition	Good Condition
Photo	See Photo
Capacity : 3000 Ton Stroke : 2600 mm Daylight : 3300 mm Table : 4300 mm x 3000 mm Bolster : 4300 mm x 3000 mm No. of Cylinders : 5 Max. Hyd. Pressure : 272 kg/cm 2 Dia. of Ram : 530 mm Main Motor : 225 kW, 3300 V, 60 Hz

50

ID	MA29628
Make	WMW Erfurt,Germany
Model	PYE250S1
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton, Working pressure of 200 kg / cm2, A speed of movement of the piston, down - 200 mm / sec Up - 110 mm / sec, Stroke - 500 mm, Depth (from the front kai on the table to the shell) - 360 mm, The maximum distance between the table and the upper clamping plate - 800 mm, Total weight - 8 tons, No tipping device, Operating temperature 10-45 degrees C, Kind of current - 3H, AC / 50 Hz, Control voltage - 60 volts, Power consumption - 20,5 kW, Rated current - 41 A.

51

ID	MA29506
Make	Lake Erie
Model
YOM
Condition	Good Condition
Photo	See Photo
Rated capacity:1350 ton, Draw slide: 750 ton, Blankholder slide: 600 ton, Cushion: 150 Distance between 12" diameter posts: 86" l-r x 54" f-b, Bed & Blankholder area: 84" l-r x 84" f-b Nominal, Draw slide area: 61" l-r x 60" f-b, Cushion Plate Area: 58" l-r x 56" f-b, Drawslide stroke: 66" Maximum Depth, Blankholder slide: 42" of Draw, Cushion slide stroke: 24" Double Action/21" Single Action, Stroke: 42" Single Action, Daylight opening draw slide: 128" Over Bolster Daylight opening blankholder slide: 102" Over Bolster Blankholder rams diameter: 4-12-1/2" @ 2450 PSI Draw slide rams diameter:1-22-1/2" & 2 - 11 @ 2512 PSI Cushion rams diameter:1 - 10" & 2 - 5-1/2" @ 2200 PSI O.A. Dimensions: 180" LR X 130" FB X 410" HIGH EQUIPPED WITH: Pumping Unit: Two (2) Oilgear DX-15025 Pump - 108 GPM, each driven by 250 HP/440/3/60 G.E. Motor One (1) Oilgear DX-6025 Pump - 44.6 Driven by 60 HP GPM Pump and 30 HP 440/3/60 Motor, Driving Vickers 60 GPM SPEEDS: Closing:800 IPM Prepressing: 260 IPM @ 250 tons 84 IPM @ 750 tons Return-draw:930 IPM (Platen Only) Return-draw & Blankholder: 680 IPM (Combined) Cushion ejector return:290 IPM Cushion pressing:196 IPM (Reverse Draw to 150 tons) Pressing:56 IPM at 1350 tons Single Action Controls: Full Pushbutton Operation with Stations front and rear

52

ID	MA29292
Make	Kobelco(Kobe Steel)
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 5000 ton, L�W�H : 8000 mm � 5000 mm � 10500 mm, Stroke : 3500 mm, Bolster : 3500 mm � 4000 mm, Daylight : 4000 mm, Descending Speed : 700 mm/sec, Pressing Speed : 0.1~16 mm/sec, Ascending Speed : 330 mm/sec, Oil Tank Capacity : 26000 Liter.

53

ID	MA29287
Make	Daeheung
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton, Between columns : 700 mm, Stroke : 600 mm.

54

ID	MA29217
Make	Hugh Smith
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Max pressure : 1,000 tons, Distance between columns : 3050 mm left to right, 2285 mm from to back, Platen : left to right 3860 mm, front to back 3100 mm, Stroke : 1500 mm, Daylight : 1650 mm, Operating speed : 50 mm /sec, Gravity approach : 6 mm /sec, Pressing return : 50 mm /sec, Working weight : 1060 mm, Machine weight : 102 tons, Towels hydraulics.

55

ID	MA29187
Make	Kawasaki
Model
YOM
Condition	Very good condition,Under power
Photo	See Photo
Capacity : 1200 ton, Stroke : 1300 mm, Daylight : 2450 mm, Table Size : 4800 x 2200 mm, Slide Size : 3200 x 2200 mm, Pressure Speed : 60 mm/s - 30 mm/s, Low Speed : 30 mm/s - 15 mm/s,

56

ID	MA29181
Make	Beck & Rohm
Model	BHO-ZP1000
YOM	1993
Condition	Good Condition
Photo	See Photo
PRESS DESIGN :- Number of con-rods / cylinders : 1, Number of slide actions : 1, Table cushion yes, PRESS FORCES :- Total force (nominal) : 1000 ton, PRESS TABLE : Table surface (left-right) : 2050 mm, Table surface (front-back) : 1000 mm Height above floor level : 500 mm, DIE CUSHION (TABLE CUSHION) :- Cushion force : 200 ton, Stroke : 160 mm DIMENSIONS / WEIGHTS :- Space requirements length : 3200 mm, Space requirements width : 2000 mm, Total height : 6700 mm, Height above floor level : 5500 mm, Height under floor level : 1200 mm, Total weight approx. : 68000 kg, Press is equipped with automatic feeding. Cushion 40 a piston 200 KN, Cushion Dimensions: 8 circles free Controllable about 1500 wide x 1000 mm deep, Maximum mold height: ca.600 mm, CE Compliant. Accessories :- Lubrication table with automation, Board dimensions : 1300 mm long x 800 mm wide. Controls : PLC SIEMENS S5.

57

ID	MA29179
Make	Glovanola Swiss
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton, Stroke: 1600 mm, Table: 2200 x 1700 mm, Bolster: 1700 x 1400 mm, Dimensions to columns: 6000 mm, Dimensions: 7400 x 5000 x 6700 mm, Weight moor as : 80 tones

58

ID	MA29176
Make	Kawasaki Yucoh
Model
YOM	1969
Condition	Good Condition
Photo	See Photo
Capacity: 2000 ton, Max stroke: 1200 mm, Open high: 2800 mm, Ram bed: 6000 x 2500 mm, Table face: 6000 x 4000 mm, Unload speed: 900 cm/min, Press speed: 54 cm/27cm, Rate of climb: 540 cm/min

59

ID	MA28975
Make	TCS
Model	530.1000.250
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity: 530 ton, Blank holder power: 250 ton, Max. daylight between tables: 1400 mm, Bed size: 1000 x 1000 mm, Slide area:1000 x 1000 mm, Slide stroke: 1000 mm, Stroke of die cushion: 450 mm, Press weight about: 28 ton, Overall dimensions about: 2500 x 1800 x 5900 mm, Operating pressure: 200 bar, Electric voltage: 380 volt/50 HZ,

60

ID	MA28892
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:500 ton, Stroke:800 mm, Daylight:1300 mm, Bolster:2800 x 800 mm

61

ID	MA28529
Make	Hydraulico
Model
YOM
Condition	Good Condition
Photo	See Photo
Max. pressure : 200 Ton, Max. cushion force : 100 Ton, Max. length of stroke : 500 mm, Length of stroke on holder : 250 mm, Table size : 1000 x 800 mm, Distance between table and ram : 800 mm, Weight : 8.030 Kg.

62

ID	MA28498
Make	Muller
Model	ZE500-25.23.1
YOM	1970 Overhauld 1998
Condition	Good Condition
Photo	See Photo
Press Frame Design. Total force : 500 ton, Table surface (left to right) : 2500 mm, Table surface (front to back) : 1730 mm, Ram table surface (left to right) : 2500 mm, Ram table surface (front to back) : 1600 mm, Ram stroke : 900 mm, Stroke per minute : 10 min, Slide Ejector / Cushion :- Stroke : 150 mm, Force : 150 ton, Die Cushion ( Table Cushion) :- Cushion force : 200 ton, Cushion stroke : 198 mm, Cushion plate surface (left-right) : 2200 mm, Cushion plate surface (front-back) : 1400 mm, Tool Assembly Dimensions :- Shut height (stroke down, adjustment up), TDC : 800 mm, Distance table - ram max : 1700 mm, Distance between columns (H-frame) : 2520 mm, Dimensions / Weights :- Space requirements length : 4200 mm, Space requirements width : 2200 mm, Total height : 8300 mm, Height above floor level : 6700 mm, Total weight approx : 120000 kg, Moving bolster design front. All presses have moving bolster. Control : PLC Siemens S7. Qty : 3 nos.

63

ID	MA28479
Make	Amino
Model	PF400K
YOM	1984
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Ram Stroke : 1400 mm, Maximum output : 400 x 140 ton, Daylight : 2000 mm, Table : 2500 x 1500 mm, Push up output : 32 max, Slide dimension : 2500 x 1500 mm, Mold weight : max 20 ton, Die cushion output : 140 ton, Die cushion stroke : 350 mm, Die cushion pad : 1800 x 1050 mm, Die cushion pin : 40 mm, Hydraulic pump & motor :- Model : LZ090-410R, Discharge rate : 114 min, Operating pressure : 256 kg, Motor : 37 kW, 4P, 200V, 50HZ, Pilot Pump :- Model : vane Pump HVP FCCZ 17.25, Discharge rate : 24 min & 36 max, Operating pressure : 45 kg/cm2 & 100 kg/cm2, Motor : 10 kw use the motor of the main Pump (10 Kw equivalent). Operating Speed :- Main Press descent : 115 mm, Main press ascent : 115 mm, Minimum stroke speed descent : 12~6 mm, Minimum ascent speed slow : 15~20 mm, Minimum weight descant speed : 15~20 mm, Die cushion ascent : 60 mm. With cushion. Moving Bolster (Front).

64

ID	MA28476
Make	Eitel
Model	RZ350
YOM	1972/2000
Condition	Good Condition
Photo	See Photo
Ram pressure : 400 Mp, Pressure attenation : 200 Mp, Die cushion : 60 Mp, Drawing cushion : 900 mm, Ram stroke : 30 mm, Die cushion stroke : 200 mm, Installation height ram and table : 1400 mm, Workspace table : 1400 x 2000 mm, Ram workingspace : 1400 x 2000 mm, Die cushion workspace : 650 x 1500 mm, Demand for oil : 4000 l, Connection value : 270 kW, Voltage : 380 V, Shipping weight : 52 to, Height : 6600 mm, Width : 2010 mm, Length : 3900 mm, Working feed : 60 mm, Feed up : 450 mm, Feed down : 500 mm. Deep foundation : 1700 mm, With associated switch and control cabinet overhaul in 2000 from Betz.

65

ID	MA28475
Make	Hidropress Hesa
Model	E204-206
YOM	1980
Condition	Good Condition
Photo	See Photo
H Frame Press. Number of con-rods : 1. Capacity : 350 ton, Table surface (left to right) : 1200 mm, Table surface (front to back) : 1000 mm, Ram surface (left to right) : 1200 mm, Ram surface (front to back) : 1000 mm, Ram Stroke : 700 mm, Die cushion (Table Cushion) :- Number of cushions : 1, Cushion force : 100 ton, Cushion plate surface (left to right) : 1000 mm, Cushion plate surface (front to back) : 1000 mm, Total power consumption : 30 kw, Mains Voltage : 380 V, Mains Frequency : 50 Hz, Space requirements length : 2500 mm, Space requirement width : 1600 mm, Height above floor level : 850 mm, Height under floor level : 4800 mm, Total Weight : 25000 kg. light barrier. 2 hand engaement.

66

ID	MA28437
Make	Schuler German
Model	HHU-5000-3.0x2.0
YOM	2007
Condition	Good Condition
Photo	See Photo
Capacity : 5000 ton, Maximum stroke : 1000 mm, Daylight : 2000 mm, Slide closing speed : 600 mm/s, Working speed max : 90 mm/s, Working speed at nominal force : 58 mm/s, Die area max (L-R x F-B) : 3150 x 2150 mm, Die area min at nominal force (L-R x F-B) : 2600 x 1580 mm, Die shut height min : 997 mm, Total weight of die : 50000 kg, Weight of upper die : 20000 kg, Admissible off - center load (L-R) : 4500 KNm, Admissible off - center load (F-B), Installed power rating : 550 kW, Nominal current : 880A, Voltage : 440V, Frequency : 60 Hz, Hydraulic operating pressure : 280 bar, Total oil volume : 4800 L, Oil type : HLP 46, Air pressure : 6 bar, Safety distance : 496 mm, E-Stop reaction time : 310 ms, E-Stop reaction stroke : 125 mm. Qty : 2 nos.

67

ID	MA28424
Make	Loire
Model	SMC2000
YOM	1974
Condition	Good Condition
Photo	See Photo
Capacity: 2000 ton, Slide stroke: 1500 mm, Ram size: 4000 x 1900 mm, Return capacity: 195 ton, Table size: 4000 x 1900 mm, Distance between columns: 4100 mm, Min distance between table and ram: 1000 mm, Approach speed: 200 mm/sec, Return speed: 130 mm/sec, Work speed: 1-10 mm/sec, Total power: 140 Kw, Total weight: 160000 Kg.

68

ID	MA28253
Make	Keukdong
Model	KDTP1200
YOM	2008
Condition	Good Condition
Photo	See Photo
Capacity: 1200 ton, Stroke: 1800 mm, Bolster area: 4000 x 2400 mm, Die cushion capacity: 400 ton, Die cushion stroke: 350 mm, Moving table: Front/Rear moving, Open height: 2100 mm.

69

ID	MA28236
Make	Hydrap,Germany
Model	HPDZB400
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity: 400 tons, Table dimension 3000 x 1900 mm, Distance between column 3140 mm, Stroke 1200 mm, Daylight max. 1300 mm, Daylight min. 800 mm, Cushion capacity adjustable 40 tons, Cushion stroke 160 mm, Oil volume 4000 l, Main Motor 110 kW, Main voltage 380 V, Main frequency 50 Hz, Weight approx. 114 tons, with moving bolster, Height over floor approx. 6600 mm, Dimension approx. 4800 x 2600 mm, with die cushion in bed, with moving bed, withSiemens control unit.

70

ID	MA28205
Make	CMB
Model	HZPU400-2500/1600
YOM	1977
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Table surface (left-right) : 2500 mm, Table surface (front-back) : 1600 mm, Thickness of bolster plate : 220 mm, Height above floor level : 600 mm, Ram force : 400 ton, Table surface (left-right) : 2500 mm, Table surface (front-back) : 1600 mm, Stroke : 800 mm, Stroke rate (max.) : 9 /min, SLIDE EJECTOR / CUSHION stroke : 100 mm, SLIDE EJECTOR / CUSHION force : 1.25 ton, DIE CUSHION (TABLE CUSHION) number of cushions : 1 cushion force : 160 ton stroke : 400 mm, cushion plate surface (left-right) : 2150 mm, cushion plate surface (front-back) : 1250 mm, working principle : hydraulical RAM (HYDR. PRESS) approximation velocity max. : 400 mm/s working velocity max. : 38 mm/s return velocity max. : 285 mm/s return force : 51 ton, TOOL ASSEMBLY DIMENSIONS distance table - ram max. : 1660 mm, distance between columns (H-frame) : 2530 mm, ELECTRICAL SPECIFICATIONS total power consumption : 75 kW.

71

ID	MA28070
Make	Kojima,Japan
Model	HSP-1500
YOM	1998
Condition	Good Condition
Photo	See Photo
Press capacity : 1500 ton, Stroke : 1500 mm, Daylight : 2200 mm, Slide area : 4000 x 2500 mm, Bolster area : 4000 x 2500 mm, Pull back capacity : max. 100 ton, Die cushion capacity : 300 ton, Die cushion stroke : 300 mm, Die cushion pad area : 3250 x 1900 mm, Oil Tank capacity : Approx. 5000 L, Motor : 400 v.50 Hz. 6 P, 160 Kw x 3, Maximum Descending Speed : 600 mm/sec, Over Drop Distance : 110 mm, Stopping Time : 220 ms, Maximum Stopping Time : 240 ms New control instead of MITSUBISHI last SIEMENS model, New security elements, machine now meets CE normes, Sealings of main cylinders have been changed.

72

ID	MA28055
Make	Hoesch,Germany
Model	MFD
YOM	New 1990
Condition	Good Condition
Photo	See Photo
Tonnage Capacity : 2340 US Tons/2000 Metric, Free Retraction Force � At Rapid Traverse Speed : 30 Tons, � At Setting Speed : 50 Tons, Free Tool Opening Force : 500 Tons, Normal System Operating Pressure : 315 Bar, Diameter of Working Cylinders (2) : 697.5 mm, Diameter of Retraction Cylinder : 215 mm, Length of Stroke : 2115 mm, Daylight Opening : 2902.5 mm, Area of Platens : 141.7" L-R x 108.3" F-B, Distance Floor to Platens : 525 mm, Speeds � Closing : 30000 mm, - Compression : 30� 875 mm, - Retraction : 30000 mm, Floor Space Required : 217" L-R x 138" F-B x 471" H, Depth Required Below Floor Level : 1975 mm, Weight (Est.) : 507,000 Lbs, Equipped With: Parallelism System, Controls, Hydraulic System and Electrical, Quantity : 4

top