V. K. Engineering - Buying & Selling of Machines made easy

Category : Sheet Metal

Sub-Category : Press Sheet Stamping Mechanical

Total Machines Found : 1108

Select

| Machine Details

ID	MA39580
Make	Komatsu
Model
YOM	2004
Condition	Good Condition
Photo	See Photo
Capacity: 200T Maker: Komatsu Model: H1F200 Year of Mfg: 2004 STROKES : 50 PER MIN SLIDE SPEED :825MM/SEC STROKE LENGTH : 250MM DIE DIE HEIGHT :450MM SLIDE ADJUSTMENT : 120MM BOLSTER DIMENSION : 1450 X 840MM SLIDE DIMENSION : 850 X 550MM MOTOR CAPACITY : TBC

ID	MA39577
Make	Fukui
Model
YOM	2001
Condition	Good Condition
Photo	See Photo \| See Video
Press Line Make: Fukui, Japan Year: 2001 1st Press - Capacity: 800 Ton Stroke: 800 mm Speed: 10 ~ 22 SPM Die height: 1120 mm Adjustment: 800 mm Bolster size: 3000 x 1800 mm Slide size: 3000 x 1800 mm Main motor: 132 kW (DC) Die Cushion - 160 Ton 2nd / 3rd / 4th Press - 400 Ton Stroke: 750 mm Speed: 12 ~ 24 SPM Die height: 1120 mm Adjustment: 600 mm Bolster size: 3000 x 1800 mm Slide size: 3000 x 1800 mm Main motor: 75 kW (DC) Die Cushion: 120 Ton Moving Bolster Direction: L-R Important - Only 1st & 4th Press has die cushions

ID	MA39575
Make	Komatsu
Model	E2P500
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Number of stroke - 15-25 spm Stroke length - 500 mm Die Height - 1100 mm Slide adjustment - 400 mm Slide area - 3600 x 1500 mm Porsche dimensions - 3600x1500x200 mm Sudden stop time - 265 ms Maximum stop time - 285 ms

ID	MA39562
Make	Clearing
Model
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity -: 400 tons. Cinematography Eccentric Plunger Push points No. 2 Sled size 2.620 x 1.470 mm. Table Size 2.740 x 1.470 mm. Slide adjustment 280 mm Number of strokes/min 10-18 c/min. Sled race 400 mm Light at the lower point RSA 850 mm. min. max. 1,130 Cushion in the Basement Present

ID	MA39557
Make	TMP VORONEZH
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
Ton 800 Table - x (mm) 2470 Slide - stroke (mm) 320 Table - width (mm) 2470 Frame (H/C) H FRAME Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) ECCENTRIC Table - y (mm) 1600 Slide - x (mm) 2100 Slide - y (mm) 1400 Slide - number of guides 8 Slide - adjustament system (guided/sphere/wedge) GUIDED Tdc span (mm) 1320 Front span between the pillars (mm) 2600 Lateral window (mm) 1100 Die cushion - total strength (ton) 100 Die cushion - motion (hydraulic/pneumatic/hydropneumatic) PNEUMATIC Piston rods 2 Subtype (DM / CDC) DOUBLE UPRIGHT Revision 2003 Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) ECCENTRIC Table - depth (mm) 1600 Slide - width (mm) 2100 Weight (ton) 84 External dimensions - X (mm) 4000 Die cushion - number of cushions 2 External dimensions - Y (mm) 2000 Die cushion - stroke (mm) 150 External dimensions - height (mm) 7000 Foundation (cm) 150 Motor power (kW) 75 Electrical components - number of motors 2 Accessories / other data JOINT LINE 600X5mm Electrical panel conditions (working/missing/complete inspection/inspection required) COMPLETE INSPECTION, 2013 Light barriers (frontal/posterior) FRONTAL AND POSTERIOR Slide - depth (mm) 1400 Safety protections (frontal/posterior) FRONTAL AND POSTERIOR Slide - registration (mm) 200 Push points 2 Sled - number of guides 8 Slide - adjustment system (guided / ball / wedge) GUIDED Light pms (mm) 1320 Front gap between uprights (mm) 2600 Side window between the uprights (mm) 1100 Blank holder cushion - total force (ton) 100 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) TIRE Blank holder cushion - number of cushions 2 Blank holder cushion - stroke (mm) 150 External dimensions - width (mm) 4000 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 7000 Electrical components - No. of motors 2 Motor power (kw) 75 Conections electrical panel (working, missing, overhauled, to be overhauled) REVISED 2013 Photocells (front / rear) FRONT AND REAR Safety protections (front / rear) FRONT AND REAR

ID	MA39556
Make	Ettore Roche
Model	CDRF100
YOM	1970
Condition	Good Condition
Photo	See Photo
PRESSURE 100 Ton. STROKE 40 mm STROKES PER MINUTE 24/40 RAM ADJUSTMENT 80 mm MAIN MOTOR HP 10 N 1450 RAM ADJUSTMENT MOTOR HP N LUBRICATION Supports bushings: FL LITHIUM 1PB Sphere bearings: FL LITHIUM 2 Exposed gears: BLACKUP 2500 Variators and oil bath gearbox: TEYNALUBE 65 Nebulizers: BAREYNA 30 ATTENTION! Keep the screw sphere constantly lubricated.

ID	MA39555
Make	Ettore Roche
Model	CDRF100
YOM	1977
Condition	Good Condition
Photo	See Photo
PRESSURE: 100 Tons. STROKE: 40/290 mm. STROKES PER MINUTE: 20/40 RAM ADJUSTMENT: 80 mm. RAM ADJ. MOTOR HP: No MAIN MOTOR HP: 15/9 N� 1440 LUBRICATION: AGIP Support Bushings: AGIP F.1 GRPP Ball Bearings: AGIP F.1 GR MU 2 Exposed Gears: AGIP F.1 FIN 332 Variators and oil bath gearbox: AGIP F.1 OSO 65 Nebulizers: AGIP F.1 OBI 14

ID	MA39541
Make	Amada
Model	TPWL-250
YOM	1999
Condition	Good Condition
Photo	See Photo
Press Make - Amada Model - TPWL-250 Year - 1999 Capacity - 250 Ton Stroke - 30-60 SPM Stroke Length - 170 mm Die Height - 450 mm Slide adjustment - 120 mm Sudden stop time - 23 ms Slide Dimensions - 2100x900 mm Bolster Dimensions - 2900x1000 mm Power - 200 V Main Motor - 22 kw Leveler Make - Amada Model - LFD-400T Material Web - 50~400 mm Width Thickness - 150x4.5 mm Coil weight - 3000 kg Coil outer Diameter - 1400 Coil Inner Diameter - 508 Drive Motor - 7.0 kw Power - 200 V Operating Voltage - 24 V

ID	MA39535
Make	Loire
Model
YOM
Condition	Good Condition
Photo	See Photo
1.(Tank volume - 500 dm3 2.Delivered quantities- 360/180/20 dm3 min-1 3.Working pressure- 260/260/50 bar 4.Maximum power- 143.45 kW 5.Electric motor speed- 1450 min1 6.Working fluid- oil Mobil DTE25, ESSO NUTO H46, OH-HM 46 7.Working temperature 25-55C 8.Filtration minimum cleanliness class 9 according to NAS 1638 (18/15 according to ISO/DIN 4406) 9.Cooling recommended filter elements B102100 air 36 kW/20�C (mode-approx. 20 10.1Electric motor voltage- 230/400V:50Hz up to 3Kw 400/690V; 50Hz from 4kW 11. Element voltage 24V DC 12.Equipment noise approx. 85 dB(A) 13.Working force max. 8000 KN 14.Return force max. 1200 kN 15.Approach speed max. 340 mm/s 16.Return speed max. 11033/s

ID	MA39533
Make	Voronetz
Model
YOM
Condition	Good Condition
Photo	See Photo
500TON Movin BOLSTER SIZE 3150 X 1800 Stroke 600

ID	MA39524
Make	Verson
Model
YOM	1968
Condition	Good Condition
Photo	See Photo
ton- 2000 Table - width (mm) 4976x1524 Number of strokes / min 15-30 Subtype (DM / CDC) DM CE mark No Revision 2001 Slide - stroke (mm) 457 Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) Eccentric Removable table (front / side / T-track) Yes front Slide - width (mm) 4976x1524 Push points 2 Sled - number of guides 8 Slide - adjustment system (guided / ball / wedge) Guided Light pms (mm) 1437 Side window between the uprights (mm) 1739 Blank holder cushion - total force (ton) No External dimensions - width (mm) 6000 External dimensions - depth (mm) 2500 External dimensions - height above ground (mm) 8000 Motor power (kw) 300 Conections electrical panel (working, missing, overhauled, to be overhauled) working Conditions WORKING Slide - registration (mm) 254 Weight (ton) 345 Foundation (cm) Yes

ID	MI11389
Make	Bliss
Model
YOM
Condition	Good Condition
Photo	See Photo
Bed size size : 1600 x 1150 mm Stroke : 300 mm Daylighy 900 mm With cushion Two point Brand new multi disc clutch

ID	MI11375
Make	AIDA,Japan
Model	NC1-150(1)
YOM	1996
Condition	Good Condition
Photo	See Photo
Pressure Capacity: 150 tf Stroke Length: 130 mm Continuous Strokes Without Load: 40-85 spm Die Height: 350 mm Slide Adjustment: 100 mm Main Motor: 11 kW Air Supply Pressure: 5 kgf/cm� Maximum Upper Die Lifting Capacity: 290 kgf

ID	MA39499
Make	AIDA,Japan
Model	NC1-150(2)
YOM	1996
Condition	Good Condition
Photo	See Photo
Pressure Capacity 150 tf Stroke Length 200 mm Continuous Strokes per Minute 30-55 spm Die Height 400 mm Slide Adjustment 100 mm Main Motor 11 kW Air Supply Pressure 5 kgf/cm�

ID	MA39496
Make	Amada
Model	TPL200L
YOM	1992
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 200 Ton Number of stroke - 25-40 spm Stroke length - 300 mm Die Height - 460 mm Slide adjustment - 110 mm Slide bottom Dimensions - 850x630 mm Bolster size - 1450x850 mm Main motor - 15 kw

ID	MA39491
Make	Clearing
Model	S2-400-108-60
YOM	1970
Condition	Good Condition
Photo	See Photo
DIMENSIONS : 2743 X 1524 mm CAPACITY : 400 Tons RAM : 610 mm ADJUSTEMENT : 305 mm DAY LIGHT SDAU :1118 mm STROKE PER MINUTE : 20 CUSHION : 70 Ton CUSHION STROKE : 203 mm BED ( MOBILE-MOVING BOLSTER) : LATERAL H 460 AREA - SIZE : 2743 X 1524 mm FRONTAL PASSAGE : 2850 mm SIDE WINDOW :1676mm PESO : Kg.140.000

ID	MA39490
Make	Clearing
Model	S2-500-108-60
YOM	1970
Condition	Good Condition
Photo	See Photo
DIMENSIONS:2746X1524 mm CAPACITY:500 Tons ADJUSTEMENT:305 mm STROKE PER MINUTE:12-20 CUSHION : SI BED SIZE :2746 X 1524 mm FRONTAL PASSAGE:2850 mm Pesos: Kg.115,000

ID	MA39462
Make	Erfurt
Model	3150kN
YOM
Condition	Good Condition
Photo	See Photo
Slide stroke: 400 mm Number of slide strokes per minute: 25 Distance adjustment between table and slide: 250 mm Distance between table and slide in its lower position at upper position of adjustment: 750 mm Table dimensions: 2500 x 1250 mm Main motor power: 47 kW Press dimensions: -Length: 4555 mm -Width: 2900 mm -Height: 5855 mm Press weight: 50900 kg

ID	MA39451
Make	Dong Shin
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 600 Ton Stroke length - 300 mm Number of stroke - 40 Die Height - 850 mm Slide adjustment - 400 mm Slide area - 3000x1600 mm Bolster area - 3000x1600 mm Main motor - 90 kw x 4 P Slide adjust motor - 7.5 kw x 4P

ID	MA39450
Make	Hitachi,Zosen
Model	S4-1000-380-185
YOM	2017
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 1000 ton Ability Limit (Subordinate position ) - 13mm Stroke length - 800 mm Stroke per minute - 11~18 Die Height - 1300 mm Open Height - 2100 mm Slide adjust - 500 mm Slide area - 3800x1850 mm Bolster area - 3800x1850x280 mm Workbench Height - 650 mm Main motor - 100 kw Die Cushion Capacity - 120 ton Pad area -1300x650 mm Die cushion adjust - 250 mm Adjust motor - 1.5 kw x 4P Used air pressure - 0~5.5 KG/Cm Bolster option Capacity - 10 ton Transfer speed - 10 m/min Transfer motor - 1.5 x 4 mm

ID	MA39449
Make	KMC
Model	KDH-600-1
YOM	2016
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton stroke - 350 mm Stroke per minute - 30 Die Height - 700 mm Slide adjustment - 150 mm Slide area - 3200x1400 mm Bolster area - 3200x1400 mm Main motor - 55 kw x 4P Adjust motor - 5.5 kw x 6P

ID	MA39448
Make	SSANGYONG
Model	DA-600
YOM	1980
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 600 Ton Stroke length - 400 mm Stroke per minute - 24 Die height - 1100 mm Slide area - 2500x1500 mm Bolster area - 2500x1500 mm Bolster thickness - 240 mm Main motor - 75kw x 6P Die Cushion Capacity - 50x2=100 ton Stroke - 20-250 mm Pad area - 2060x1040 mm Die cushion motor - 1.5 kw x 4P

ID	MA39447
Make	Danly
Model	SS4-600-132-84
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Slide bolster area - 3350x2100 mm Open height - 1350 mm Slide stroke - 712 mm Slide adjust - 230 mm Setting Die size - 3350x2100 mm Bolster loading - 30 ton Max cushion power - 150 ton Cushion stroke - 300 mm

ID	MA39446
Make	Cotelli
Model
YOM
Condition	Good Condition
Photo	See Photo
400 ton H-Frame Press Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table � slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP

ID	MA39444
Make	SIMPAC
Model	SS-1200
YOM	2007
Condition	Good Condition
Photo	See Photo
Capacity - 1200 Ton Stroke length - 300 mm Stroke per minute - 12-24/10 spm Die Height - 700 mm Slide adjust - 250 mm Slide area - 1500x1600 mm Bolster area - 1400x1600 mm Bolster thickness - 300 mm Main motor - 150 kw 4P(D.C) Adjust motor - 3.7kw 6P Side opening size - 800x900 mm Working Height - 750 mm

ID	MA39435
Make	AIDA
Model	PDA-20L
YOM
Condition	Good Condition
Photo	See Photo
Aida 200t PDA-20L (y1981), SPM 120-300, Stroke 30mm, Bolster 1600850mm, Slide area 1470650mm, Die Height 410mm, Adjustment 60mm, ・Aida Uncoiler EDR-1-25N (y1981), ・Aida Roll feed RCF-35

ID	MA39407
Make	Wasino,Japan
Model	PUX200KRC
YOM	1985
Condition	Good Condition
Photo	See Photo
CAPACITY 200 Ton STROKE 200 mm. STROKE PER MINUTE 30-45 spm DIE HEIGHT 420 mm. BOLSTER AREA 1450 x 850 mm. SLIDE AREA 850 x 630 mm. SLIDE adj. 110 mm.

ID	MA39406
Make	Amada
Model	TP-200L
YOM	1992
Condition	Good Condition
Photo	See Photo
CAPACITY - 200 Ton STROKE 300 mm. STROKE PER MINUTE 35-40 spm DIE HEIGHT 460 mm. BOLSTER AREA 1450 x 850 mm. SLIDE AREA 850 x 630 mm. SLIDE adj. 110 mm.

ID	MA39405
Make	AIDA
Model	NC1-200(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity/Pressure: 200 t (tons) Stroke Length: 250 mm Stroke Rate: 25-45 spm (strokes per minute) Die Height: 450 mm Slide Adjustment: 110 mm Main Motor Power: 15 kW

ID	MA39402
Make	AIDA
Model	NS2-3000 (2)
YOM	2000
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Pressurization ability - 3000 KN Number of continuous strokes without load - 300 mm Stroke Per Minute - 15~35 spm die height -650 mm mm Slide adjustment amount - 130 mm Slide dimensions: L/R x F-B - 2400�900 mm Bolster dimensions: L/R x F-B - 2600�1200 mm main motor -37 kW supply air pressure - 0.5 MPa Maximum overhang mass -2300 kg Sudden stop time -210 ms Stop time : - Maximum two-handed operationv -220 ms :-ray type -240 ms Overrun monitoring device setting position -12�3'

ID	MA39401
Make	SIMPAC
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -300 Ton Stroke length -300 mm Number of strokes -20~40 SPM Die height -650 mm Slide adjustment amount -120 mm Slide area -2600 x 1000 mm Bolster area -2650 x 1100 mm Bolster thickness -200 mm Main motor -37 x 4 KWxP Slide adjustment motor -2,2 x 4 die cushion ability -22 mm Stroke length -130 ton Die cushion pad area - 800�500 (2EA) mm

ID	MA39395
Make	Komatsu
Model	500 OP-5125
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Type: Single action 2-point crankless press Capacity: 500 Ton Stroke: 500mm Die Height: 1350mm (From the top of the bolster to the bottom of the slide) Slide adjust: 400mm Spm (Strokes per minute): 20spm Bolster size: 3000mm (left & right) x 1700mm (front & rear), with a thickness of 200mm Cushion: 1 pad, 2 cylinders, 80 ton capacity Cushion st (Stroke): 250mm Main motor: 75kw, 400v, 1000rpm

ID	MA39392
Make	SSANGYONG
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1 )Make -SSANGYONG Model -ECS 250 YOM -1997/9 CAPACITY - 250 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 25-50 SPM DIE HEIGHT- 550 mm SLIDE ADJUST -120 mm SLIDE AREA (LR � FB) - 900 x 730 mm BOLSTER AREA(LR � FB) -1500 � 920 mm BOLSTER THICKNESS - 170 mm MAIN MOTOR -22 x 4 KW X P ADJUST MOTOR - 1.5 x 4 KWXP DIE CUSHION CAPACITY -14 Ton STROKE -130 mm PAD AREA (LR � FB) -640 X 420 DIE CUSHION MOTOR -KWXP 2 )Make -SSANGYONG Model -CS 150 YOM -1996/2, CAPACITY - 150 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 40 SPM DIE HEIGHT- 450 mm SLIDE ADJUST -100 mm SLIDE AREA (LR � FB) - 760 x 580 mm BOLSTER AREA(LR � FB) -1350 � 760 mm BOLSTER THICKNESS - 120 mm MAIN MOTOR -15 x 4 KW X P ADJUST MOTOR - 0.75 x 4 KWXP DIE CUSHION CAPACITY -15 Ton STROKE -110 mm PAD AREA (LR � FB) - DIE CUSHION MOTOR - 3)Make -SSANGYONG Model -CS 150 YOM -1995/05 CAPACITY - 150 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 40 SPM DIE HEIGHT- 450 mm SLIDE ADJUST -100 mm SLIDE AREA (LR � FB) - 760 x 580 mm BOLSTER AREA(LR � FB) -1350 � 760 mm BOLSTER THICKNESS - 120 mm MAIN MOTOR -15 x 4P (KW X P) ADJUST MOTOR - 0.75 x 4P ( KWXP) DIE CUSHION CAPACITY -15 Ton STROKE -110 mm PAD AREA (LR � FB) -680 x 420 DIE CUSHION MOTOR - x 4)Make -SSANGYONG Model -CS 150 YOM -1997/04 CAPACITY - 150 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 40 SPM DIE HEIGHT- 450 mm SLIDE ADJUST -100 mm SLIDE AREA (LR � FB) - 760 x 580 mm BOLSTER AREA(LR � FB) -1350 � 760 mm BOLSTER THICKNESS - 120 mm MAIN MOTOR -15 x 4P (KW X P) ADJUST MOTOR - 0.75 x 4P ( KWXP) DIE CUSHION CAPACITY - STROKE - PAD AREA (LR � FB) - DIE CUSHION MOTOR - 5)Make -SSANGYONG Model -CS 150 YOM -1996/02 CAPACITY - 150 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 40 SPM DIE HEIGHT- 450 mm SLIDE ADJUST -100 mm SLIDE AREA (LR � FB) - 760 x 580 mm BOLSTER AREA(LR � FB) -1350 � 760 mm BOLSTER THICKNESS - 120 mm MAIN MOTOR -15 x 4P (KW X P) ADJUST MOTOR - 0.75 x 4P ( KWXP) DIE CUSHION CAPACITY -15 Ton STROKE -110 mm PAD AREA (LR � FB) -680 x 420 DIE CUSHION MOTOR - x 6)Make -SSANGYONG Model -CS 150 YOM -1995/05 CAPACITY - 150 ton STROKE LENGTH - 250 mm STROKES PER MINUTE (SPM) - 40 SPM DIE HEIGHT- 450 mm SLIDE ADJUST -100 mm SLIDE AREA (LR � FB) - 760 x 580 mm BOLSTER AREA(LR � FB) -1350 � 760 mm BOLSTER THICKNESS - 120 mm MAIN MOTOR -15 x 4P (KW X P) ADJUST MOTOR - 0.75 x 4P ( KWXP) DIE CUSHION CAPACITY - STROKE - PAD AREA (LR � FB) - DIE CUSHION MOTOR -

ID	MI11288
Make	Indian
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 30 Ton

ID	MA39347
Make	Komatsu Japan
Model	E2W300
YOM	2006
Condition	Good Condition
Photo	See Photo
With die cushion, Orii Co., Ltd. leveler feeder LCC06HB2HAX-EAS, with uncoiler (1989), no die Die (Day) Height 600mm Strokes 15-30 spm Pressure Capacity 300t

ID	MA39321
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
AIDA 110ton press with die cushion Model: NC1-110 (2) SPM : 35-65 Stroke: 180mm SEYI 110ton press with die cushion Model: SN1-110 Year: 1997 SPM: 35-65 Stroke: 180mm AIDA 150ton press with die cushion Model: NC1-150 (2) SPM : 30-55 Stroke: 230mm

ID	MA39312
Make	IMV
Model	DM125
YOM	2016
Condition	Good Condition
Photo	See Photo
Capacity:1250 Tons Spinning tops:2 Corsa slitta 250/500 mm Dimensions piano:4.500 x 2.000 mm. Dimensionally slit 4.500 x 2.000 mm. slit adjustment300mm Altezza stampo dal portastampi cbra:1.150 mm. Colpi al min:5-35 c/min Montanuary Apertura:2.600 mm Apertura max montanti frontali:4.900 mm Main engine power:290 Kw Basamento Cuscino:No Peso Pressa:kg 310,000 Line of nutrition Spessor materials :0,7mm./4 mm. Large material:150 mm./1.600mm. Coil core diameter:800mm./1.700mm. Internal diameter of the coil:508mm./ 610mm

ID	MA39303
Make	Komatsu
Model	20BS200-6
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
MAXIMUM CAPACITY -1960 KN (Short Ton ) - 220 Capacity -200 Ton NUMBER OF SLIDE STROKES - 25-50 seam SLIDE STROKE -250 mm DIE HEIGHT -450 mm (BETWEEN BOLSTER AND SLIDE STROKE DOWN ADJUSTMENT UP) SLIDE ADJUSTMENT - 120 mm SLIDE DIMENSIONS (LRXFB) - 650x650 mm BOLSTER DIMENSIONS (LRXFBX THICKNESS) - 1450 x 840 x190 mm STOPPING TIME - 170ms CHECKING RANGE OF OVERRUN - 15 deg. ALLOWABLE UPPER DIE WEIGHT -650 kg (1430 lbs) 200 Ton X 6 unit press Available for

ID	MI11275
Make	AIDA,Japan
Model	NC1-1500
YOM	2003
Condition	Good Condition
Photo	See Photo
Capacity : 150Ton Stroke : 200mm SPM : 30~55 Die Height : 400mm Slide Adjustment : 100mm Slide Area (L-R) x (F-B) : 700 x 580 Bolster Area (L-R) x (F-B) : 1170 x 760mm Main Motor : 11kW

ID	MI11274
Make	Amada
Model	TP150
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity - 150T Type - C Frame single crane Stroke Length -225mm Speed - 25-45SPM Die Height - 430mm Bolster Area - 1250x750 mm Slide Area -700 x 500mm Slide Adjustment -100mm Motor - 11KW Die Cushion - Available

ID	MA39286
Make	SIMPAC
Model	ECS -110
YOM	2001 -2
Condition	Good Condition
Photo	See Photo
CAPACITY -110 Ton S TROKE LENGTH (Stroke) -180 STROKES PER MINUTE (SPM) -35-70 SPM DIE HEIGHT -350 MM SLIDE ADJUST -80 mm SLIDE AREA (LR FB) - 600 x 520 mm BOLSTER AREAILAVEB) (Bolster Area) - 1100 X680 mm BOLSTERTHICKNESS (볼스타 두개) MAIN MOTOR 130 mm ADJUST MOTOR (Adjust Motor) -11X4 hp DIE CUSHION CAPACITY -10 Ton STROKE -60 mm PAD AREA (LRXPB (Bad Comics) - 540 x340 mm DIE CUSHION MOTOR 110 ton x 3 units available

ID	MA39285
Make	SIMPAC
Model	ECS-150
YOM	2000/4
Condition	Good Condition
Photo	See Photo
CAPACITY - 150 Ton (Stroke) STROKE LENGTH - 200 mm (SPM) STROKES PER MINUTE -30 -60 SPM DENEIGHT -430 mm SLIDE ADJUST -100 mm SLIDE AREA (LRX FB) -700 x 580 mm BOLSTER AREA (LR x FB) -1250 X 760 mm BOLSTER THICKNESS - 140 mm MAIN MOTOR - 15 x 4 KWXP ADJUST MOTOR - 0.75 X 4 KWXP Die Cushion Capacity -14 ton Stroke - 100 mm Pad Area - 640 x 420 mm Die cushion Motor - 150 ton x 4 units available

ID	MI11261
Make	Erfurt
Model	PKZZI2000
YOM	1988
Condition	Good Condition
Photo	See Photo
Capacity � 2000 Ton Bolster Size � 4000x1800mm, Fixed with Die Cart Slide Size � 4000x1800mm Stroke � 630mm Shut Height � 950mm Slide Adjustment � 630mm Die Cushion � 400T/ 250 mm Stroke

ID	MI11256
Make	AIDA,Japan
Model	PM46
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 Ton Shut Height: 500 mm Stroke Length: 80 mm Slide Adjustment: 150 mm Die Height: 436 mm from the bolster top surface. Ram Undersurface Area: 1100 mm (left-right) x 800 mm (front-back) Bolster Area: 1300 mm (left-right) x 900 mm (front-back)

ID	MA39259
Make	AIDA
Model	C1- 4
YOM
Condition	Good Condition
Photo	See Photo
capacity - 45Ton Stroke length -120(mm) strokes per minute SPm -80 Bolster area (left/right, front/back) -1160�440 Slide area (left/right/front/back) (mm) -490�340 Daihite (card) -270 Slide adjustment length main motor -60 Air pressure used -5 (kg/㎡) Sudden stop time -159 (mS) Maximum two-hand operation (mS) - 764 Stop time beam type -1179 Overrun monitoring device setting position -123

ID	MA39258
Make	Chinfong
Model	G1-45S
YOM
Condition	Good Condition
Photo	See Photo
Capacity -45 Ton SPM -40 -100 Motor - VS 5 Hp X 4p Stroke -80 mm Die Height -24 mm

ID	MA39257
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -35 Ton SLIDE STROKE -70 mm STROKES PER MINUTE: NO LOAD 90~150 spm DIE HEIGHT - 200 mm SLIDE ADJUSTMENT -50 mm SLIDE AREA L.RXF.B - 380�300mm BOLSTER AREA: L.RXF.B - 730�310mm MAIN MOTOR - 3.7 kW REQUIRED AIR PRESSURE - 5 kgf/cm�

ID	MA39253
Make	Komatsu Japan
Model	OBS80
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 80Ton SPM : 60 Stroke : 160mm Die Height : 335mm Slide Dimensions : 500 x 400 Bolster Dimension : 900x 600x 90

ID	MA39252
Make	Amada
Model	TP 80X
YOM
Condition	Good Condition
Photo	See Photo
Machine specifications Pressure capacity - 80 Ton number of strokes -65-130 S.P.M. Stroke length -101.6mm die height -254.7 mm Slide adjustment amount -80mm Sudden stop time -225 ms maximum stop time -245 ms Overrun monitoring device/setting position - 10 degree power supply -220 V 3 Phase 60 HZ Motor - 5.5 K.W Machine Weight - 6.5 Ton

ID	MA39251
Make	AIDA,Japan
Model
YOM	10/1976
Condition	Good Condition
Photo	See Photo
Capacity : 80Ton Stroke Lenght : 100mm SPM : 55~105 Bolster Area : 980mm x 600mm Slide Area : 540mm x 460mm Die Height : 275mm Slide Adjustment : 80mm

ID	MA39249
Make	Chinfong
Model	OCP80N
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity : 80Ton Rating Point (up from Buttom of STR) : 4mm Stroke No : 35~80SPM Stroke : 150mm Die Hieght : 330mm Slide Adjustment : 80mm Slide Area : 560x 420mm Bolster Area : 1000mm x 550mm

ID	MA39248
Make	Amada
Model	TP110
YOM	1978
Condition	Good Condition
Photo	See Photo
Capacity -110 Ton

ID	MA39247
Make	Chin Fong,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY -110 Ton RATING POINT - UP FROM TOM OF STR -6mm STROKE NO. -30 - 60 SPM STROKE -110 mm DIE HEIGHT - 350mm SLIDE ADJUSTMENT -80 mm SLIDE AREA (LRXFB) -650 x 470 mm BOLSTER AREA (LRXFB) -1150 x 600 mm MAIN MOTOR - VS 11 KW 4 SLIED ADJ. MOTOR - 0.4 kw 4 p DIE CUSHION CAPACITY -kg /cm2 -ton DIE CUSHION STROKE - 2 press Available for Sale

ID	MI11254
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Make Wasino Model PUX150L Capacity 150 ton Die height Slide 400 mm Stroke length 200 mm Stroke number 405.P.M Adjustment amount 90 mm Table (left and right x front and back) 670x500 mm Bolster (left and right front and back) 1240x630 mm Capacity 10.4 ton Stroke length 110 mm Main motor 2 kW 6 P Slide adjustment motor 0.75 kW 4 P Air pressure used 4 kg/cm� Make Shinohara Model CS-150-S2 Capacity 150 ton Stroke length 200 mm Number of stroke 20-40 spm Die height 450 mm Slide adjustment 100 mm Slide area 760 x 580 mm Bolster area 1350 x 760 mm Main motor 15 kw 4 P Adjust motor 0.75 kw 4 P

ID	MA39233
Make	AIDA
Model	NC2-160
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity - 160 ton Slide stroke - 200 mm Strokes per minute - 30-55 s.p.m Die height - 450 mm Slide adjustement - 100 mm Slide are - 1500x580 mm Bolster are - 2040x760 mm Main motor - 15 kw

ID	MA39229
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
pressure capacity -3000KN Number of strokes - 30 Min stroke length- 350 mm The maximum speed at which the slide can descend. -570 mm/s Die height (from top of bolster to bottom of slide) -600 mm Slide adjustment amount -200 Slide dimensions (left/right x front/back) - 2100 x 900 mm Bolster dimensions (left and right) x width 2400 x width 1200 x length 200 mm Sudden stop time. -205 mm Inertia drop value - 90 mm Allowable upper mold mass - Operating ambient temperature range-5~40

ID	MA39222
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Aida 60t - 2 units Komatsu - 80t 1 unit Komatsu - 25t 1 unit

ID	MA39220
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) MODEL: PUX150 Mode :150 ton DIE HEIGHT : 400mm STROKE LENGTH : 200mm STROKE PER MINUT : 40 ADJUSTMENT :90mm ARE BELOW WITH GROUND : (LEFT TO RIGTH X FRONT AND BACK ) : 670 X 500mm BLOSTER AREA (LEFT TO RIGHT X FRONT TO BACK ): 1240X 630mm MAIN MOTOR : 11kw /6p SLIDE ADJUSTMENT MOTOR : 0.75kw /4p 2) Model : C-150-32 Capacity (torque position) : 150 ton(2.0mm) Stroke length : 200mm number of strokes : 20-40 p.m. die height : 450mm Slide adjustment amount : 105mm Slide area (LRX FB) : 760�1580mm Bolster area (LRxFB) :1350�60mm Polster thickness : 12mm main motor : 15 KW adjust motor : 05 KW

ID	MI11245
Make	YAGUCHI
Model
YOM
Condition	Good Condition
Photo	See Photo
Cap : 110Tons Stroke : 300mm Die Height : 500mm Adjustment : 70mm SPM : 35 Slide : 900x 650mm Bolster : 1200x 1000mm

ID	MI11244
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Cap : 110Tons Stroke : 150mm Die Height : 380mm Adjustment : 100mm SPM : 50 Slide : 600 x 450mm Bolster : 1100 x 700mm Accessories : With Die Cushion

ID	MI11242
Make	Chinfong
Model	OCP110
YOM
Condition	Good Condition
Photo	See Photo
Cap : 110Tons Stroke : 180mm Die Height : 350mm Adjustment : 90mm SPM : 50 Slide : 650 x 520mm Bolster : 1150 x 680mm

ID	MA39209
Make	Komatsu
Model	E2M200
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Strokes - 60~150 spm Stroke length - 100 mm Die height - 520 mm Slide adj. - 100 mm Slide area - 1550 X 850 mm Bolster size - 1550 x 950 x 210 mm

ID	MA39193
Make	SSANGYONG
Model	DA-300
YOM	2001
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Stroke length - 250 mm Stroke per minute - 15-30 spm Die Height - 650 mm Slide Adjust - 250 mm Slide area - 2600x1600 mm Bolster area - 2600x1600 mm Bolster thickness - 170 mm Main motor - 37x4(v.s) KWxP Model - MSLF-100H Coil width - 100-1000 mm Coil thickness - 0.8-6.0 mm

ID	MA39192
Make	Seyi,Japan
Model	SNS2-300
YOM	2012
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Stroke - 280 mm Stroke per minute - 20-35 spm Die Height - 550 mm Slide adjustment - 120 mm Slide area - 2400x900 mm Bolster area - 2800x1000 mm Main motor - 40x4 HPxP With Bar Feeder

ID	MA39190
Make	Komatsu
Model	OBS200
YOM	1996
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Number of stroke - 25-50 spm Slide stroke - 250 mm Die Height - 450 mm Slide adjustment - 120 mm Slide Dimensions - 850x650 mm Bolster Dimensions - 1450x840x190 mm Stopping time - 170 ms Checking range of overrun - 15 deg Allowable upper die weight - 650 kg Same model 7 Presses available

ID	MA39174
Make	Natory Japan
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Table size - 2800x1600 mm Stroke - 350 mm Die Cushion - Available

ID	MA39151
Make	Manzoni
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Ton : 500 Table - x (mm): 2600 Slide - stroke (mm : 250 Table - width (mm): 2600 Number of strokes/minute : 10/40 Frame (H/C) H FRAME Conditions: WORKING Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) ECCENTRIC Table - y (mm): 1100 Slide - x (mm): 2600 Slide - y (mm): 800 Piston rods : 2 Slide - number of guides : 8 Tdc span (mm): 1000 Front span between the pillars (mm) : 2600 Lateral window (mm) 1000 External dimensions - X (mm) 4200 External dimensions - Y (mm) 2000 Weight (ton) 60 External dimensions - height (mm) 5500 Motor power (kW) 60 Electrical panel conditions (working/missing/complete inspection/inspection required) INSPECTION REQUIRED Number of strokes / min 10/ 40 Subtype (DM / CDC) DOUBLE UPRIGHT Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) ECCENTRIC Table - depth (mm) 1100 Slide - width (mm) 2600 Slide - depth (mm) 800 Push points 2 Sled - number of guides 8 Light pms (mm) 1000 Front gap between uprights (mm) 2600 Side window between the uprights (mm) 1000 External dimensions - width (mm) 42000 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 5500 Motor power (kw) 60 Conections electrical panel (working, missing, overhauled, to be overhauled) TO REVIEW

ID	MA39119
Make	Flour
Model
YOM
Condition	Good Condition
Photo	See Photo
Power - 200 Ton Number of conrods 1 Table dimensions - 1100x650 mm Slide Dimensions - 900x380 mm Stroke - 48 to 145 mm Light at TDC - 500 mm Strokes per minute 43 Height - 3300 mm Front - 2300 mm Deep - 1700 mm

ID	MA39118
Make	Steel Press
Model
YOM
Condition	Good Condition
Photo	See Photo
Power - 105 Ton Number of conrods 1 Table dimensions - 1000 x 600 mm Slide Dimensions - 725 x 440 mm Stroke - 140 mm Slide Adjustment - 100 mm Stroke type fixed Strokes per minute 60

ID	MI11210
Make	JEIL
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 110 Ton Slide area - 800x520 mm Bolster area - 1070x680 mm Slide stroke - 180 mm Slide stroke adjust - 90 mm Stroke per minute - 35-50 spm Die height - 400 mm Main motor - 11x4 kw x P

ID	MI11209
Make	ISGEC
Model	GYB-200
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Bolster area - 1450x850 mm Stroke - 250 mm Strokes per minute - 40 spm Shut height - 550 mm Throat - 425 mm Slide adjustment - 125 mm Bolster area - 1450x850 mm Machine weight - 20 Ton

ID	MA39103
Make	Amada
Model
YOM
Condition	Good Condition
Photo	See Photo
Make - Amada Model - TPW-250C YOM - 1989 Capacity - 250 Ton Number of stroke - 30-60 spm Stroke length - 170 mm Die Height - 430 mm Slide adjustment - 120 mm Slide bottom dimensions - 2100x700 mm Bolster dimensions - 2700x790 mm Main motor - 22 kw Weight - 35 Ton Make - Amada Model - TPW-200C YOM - 1991 Capacity - 200 Ton Number of stroke - 40-75 spm Stroke length - 150 mm Stroke length - 430 mm Slide adjustment - 110 mm Slide bottom dimensions - 1850x650 mm Bolster dimensions - 2400x700 mm Main motor - 15 kw Weight - 28 Ton

ID	MA39096
Make	Mate
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton

ID	MI11199
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bloster area : 2000#1850 capacity : 300 ton

ID	MI11196
Make	Chin Fong,Taiwan
Model	STD600
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 600 Ton Slide area - 2500x1200 mm Bolster area - 2500x1200 mm Die Height - 700 mm Stroke - 300 mm Stroke per minute - 30-60 spm Rating point - 12 mm Slide adjustment - 100 mm Main motor - V.S 55 kw

ID	MI11195
Make	Komatsu
Model	E2M300
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Bed size -1850x900 mm Bolster size - 1850x1100x200 mm Number of slide stroke - 40-100 spm Slide stroke - 125 mm Die Height - 550 mm Slide adjustment - 100 mm Feeder Make - Aida Model - LFS-40R II Strip Thickness x Width - 0.5-3.2x400 mm Strip Thickness x Width - 4.5x200 mm Feed Length - 25-400 mm Feed strokes - 30-80 mm Main motor - 3.6 kw Leveller

ID	MA39077
Make	Muller
Model	EXP 160
YOM	1972
Condition	Good Condition
Photo	See Photo
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton HS decoiler M 15 / 500 - built in 2009 Material width 15 - 500 mm Coil weight 1,5 t Coil exterior diameter 1400 mm Coil interior diameter 380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mm Number of feeding rolls 2 pieces Number of straightener rolls 9 pieces Diameter of straightener rolls 61,9 mm Diameter of feeding rolls 61,9 mm Feeding speed 40 m / min Feeding length 0 - 9999,99 mm Extended machine accessories: The machine was converted to SIEMENS S7 in 2009.

ID	MA39074
Make	AIDA,Japan
Model	C2-25(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250Ton

ID	MA39073
Make	AIDA,Japan
Model	NC2-250(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250Ton

ID	MA39072
Make	Hanoul
Model	HNCP-160
YOM	1996
Condition	Good Condition
Photo	See Photo
ability 160 Ton Stroke length 200 mm number of strokes 35-50 S.P.M. dia hit 450 mm local area 1300 x 800 mm slide area (left and right) 1000 x 700 mm Slide adjustment area 100 mm Shank hole 50 dia main motor 25HP KW x P air pressure used 5 kg/cm2

ID	MA39071
Make	Hanoul
Model	HNCP-200
YOM	1996
Condition	Good Condition
Photo	See Photo
ability - 200 Ton stroke length 250 mm number of strokes 30-45 S.P.M. die hit 500 mm surface area (left and right) 1450 x 850 mm Slide area (left and right) 1100 x 700 mm slide adjustment amount 110 mm Shank hole 50 dia main motor 22 x 4 KW xP air pressure used kg/cm2

ID	MA39070
Make	Fukui
Model	MTE500
YOM	1980
Condition	Good Condition
Photo	See Photo
Stroke 400mm, SPM 12-22, Slide adjustment 200mm, Die Height 700mm, Slide area 31001100mm, Bolster 31001100mm

ID	MA39069
Make	Hanoul
Model	HNCP-200
YOM	1996
Condition	Good Condition
Photo	See Photo
Power 200 Ton cushon Stroke length 250 mm number of Strokes 30-45 S.P.M die hit 500 mm Surface area (left and right) 1400 x 850 mm Slide area (left and right) 1100 x 750 mm Slide adjustment amount 110 mm Shank hole 50 Dia main motor 30HP KW x P Air pressure used kn/cm2

ID	MA39068
Make	Bochang
Model	BS200
YOM	2003
Condition	Good Condition
Photo	See Photo
Press ability - 200 Ton shank diameter 50 Dia Stroke Length 250 mm Number of Strokes 45 spm Die hit - 480 mm slide adjustment amount 100 mm Bolster area 1430 x 810 mm Slide area 1120 x 660 mm main motor x Kw x 4 x P slide adjustment electric motor x Kw x 4 x P Workbench height mm machine weight 20 Ton

ID	MA39067
Make	Benelli
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 60 Ton Table 700 x 450 mm Ram travel 110 mm Slide adjustment 63 mm

ID	MA39066
Make	AIDA,Japan
Model	NC1-1500
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150Ton Stroke : 200mm SPM : 30~55 Die Height : 400mm Slide Adjustment : 100mm Slide Area (L-R) x (F-B) : 700 x 580 Bolster Area (L-R) x (F-B) : 1170 x 760mm Main Motor : 11kW

ID	MA39065
Make	DALLE MOLLE
Model	AP63R
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 63 Ton Table 800 x 500 mm Ram travel 110 mm Strokes por minute 65

ID	MA39064
Make	Inverpress
Model	TIAR/S
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 90 Ton Table 1000 x 530 mm Ram travel 20-100 mm Strokes por minute 60

ID	MA39063
Make	Benelli
Model	PEF
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Table 830 x 500 mm Ram travel 120 mm Slide adjustment 63 mm

ID	MA39062
Make	STANKO
Model	K2130
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Table 850 x 560 mm Ram travel 130 mm Slide adjustment 100 mm Strokes per minute 56

ID	MA39061
Make	Mate
Model	MPE-4-400
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Table 700 x 400 mm Ram travel 15 - 140 mm Slide adjustment 90 mm Strokes per minute 63

ID	MA39059
Make	Spiertz
Model	PHI 10
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Table 1180 x 680 mm Ram travel 20 - 160 mm

ID	MA39058
Make	AIDA,Japan
Model	PC-10(2)
YOM
Condition	Good Condition
Photo	See Photo
Cap: 100Tons Stroke: 170mm Bed Size: 1060 x 560mm RAM Size: 600 x 450mm Die Height: 350mm Adjustment: 75mm SPM: 50

ID	MI11185
Make	Wasino,Japan
Model	PUX150
YOM
Condition	Good Condition
Photo	See Photo
C-FRAME SINGLE CRANK PRESS Cap : 150Tons Stroke : 200mm Die Height : 400mm Adjustment : 90mm SPM : 40 Slide : 670 x 500mm Bolster : 1240 x 630 Accessories With Die Cushion 150 Tons we have 10 units

ID	MI11179
Make	Chin Fong,Taiwan
Model	OCP 260
YOM	2004-7
Condition	Good Condition
Photo	See Photo
Capacity -260 Ton Bolster Area - 1750 x 900mm Slide Area - 1000 x 700mm Die Height - 530mm Stroke - 250mm Stroke/mm - 20-40 spm

ID	MA39028
Make	Seoul
Model	SSC -250
YOM	2001
Condition
Photo	See Photo
Capacity -250 Ton Die Height -550 mm Stroke -250 mm Bolster Size -1700 * 900 mm No of stroke -40 mm Die Cushion -18 ton , Stock -130

ID	MA39025
Make	Hawail
Model	HCA 250
YOM	2001
Condition	Good Condition
Photo	See Photo
Capacity -250 Ton Die Height -550 mm Stroke -250 mm Bolster Size -1600 * 900 mm No of stroke -40 mm Die Cushion -18 ton , Stock -130

ID	MA39022
Make	Dong Shin
Model
YOM	2006
Condition	Good Condition
Photo	See Photo
1) Make -Dong Shin Model -DSW 250 YOM -2006 Capacity -250 Ton Die Height -600 mm Stroke -250 mm Bolster Size -1600 * 950 mm No of stroke -40 mm Die Cushion -OK 2) Make -Dong Shin Model -DSW 250 YOM -2006 Capacity -200 Ton Die Height -500 mm Stroke -250 mm Bolster Size -1600 * 950 mm No of stroke -40 mm Die Cushion -No Two Presses for Sale

ID	MA39017
Make	HIM
Model	HCS-500
YOM	2020
Condition	Good Condition
Photo	See Photo \| See Video
Capacity :500 Tons Stroke Length:300 mm Number Of Stroke :30 Spm Die Height:600 mm Slide Adjustment:130 mm Slide Area (LRFB):15001000 mm Bolster Area(LRFB):17001100 mm Bolster Thickness:300 mm Main Motor: VS 554 KwxP Slide Adjust Motor:3.74 KwxP Air Pressure :0.5(5.0) Mpa(kgf/cm) Main Voltage : 380*50 VxHz

100

ID	MA39008
Make	Farina,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
Power (ton) 200 Number of conrods 1 Table dimensions ( x-y/mm) 1100x650 Slide Dimensions X-Y (mm) 900x380 Stroke (mm) da 48 a 145 Light at T.D.C.*(mm) 500 Stroke per minute 43 Height ( mm) 3300 Front ( mm) 2300 Deep ( mm) 1700

101

ID	MA39002
Make	IMS
Model
YOM
Condition	Good Condition
Photo	See Photo
Mechanical C- Frame Presses 1) Make -IMS Capacity -120 Ton YOM -2000 2) Make -IMS Capacity -120 Ton YOM -2001 3) Make -IMS Capacity -100 Ton YOM -1998 4)Make -IMS Capacity -100 Ton YOM - 1998 5)Make -IMS Capacity - 100 Ton YOM -2002 Quantity -5 Presses for Sale

102

ID	MI11171
Make	Komatsu
Model	HAF 160
YOM
Condition
Photo	See Photo
Capacity - 160 TON 160-ton press Stroke Length : 250 Daylight: 550 Slide dimensions: 700�550 Machine weight: 15t Inertia Drop Value - 25 mm Sudden Stop Tine -60 ms Maximum Stop time -80 ms Quantity -2 Nos

103

ID	MI11170
Make	Amada
Model	TP150
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 150 Ton Stroke per minute -40 spm Stroke Length - 225 mm Die Height - 495 mm Slide Adjustement - 100 mm Slide Area (LxR,FxB) - 800 x470 mm Bolster Dimensions (LxR,FxB) - 1250x750 mm Main motor - 11 kw Air Pressure -5 kg/cm2 Stop Short Time -165 ms 3 units available

104

ID	MI11169
Make	Seyi,Taiwan
Model	SN1-160
YOM
Condition	Good Condition
Photo	See Photo
YOM -2011 /2013/ 2014/ 2014 Capacity -160 Ton Stroke : 200mm Strokes/mm : 30/50spm Die Height : 400mm Slide Adjustment : 100mm Slide Area : 720x580mm Bolster Area : 1250x760mm Qty : 4 Quantity

105

ID	MA38999
Make	Hwail
Model
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity :160 Tons

106

ID	MA38998
Make	Hanoul
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Ability :200 Tons Stoke Length:250 mm Number Of Strokes:30-45 Spm Die Hit:500 mm Surface Area(Left and Right):1400850 mm Slide Area (Left and Right):1100750 mm Slide Adjustment Amount:110 mm Shank Hole:50 Main Motor: 30 Hp Kw*P Air Pressure Used:5 kn /Cm2

107

ID	MA38996
Make	Agostino Colombo
Model
YOM
Condition	Good Condition
Photo	See Photo
Power (ton) 160 Number of conrods 1 Table dimensions ( x-y/mm) 1100 x 660 Slide Dimensions X-Y (mm) 600 x 400 Stroke (mm) 10 - 180 Slide Adjustment (mm) 100 Light at T.D.C.*(mm) 560 Strokes type fixed Stroke per minute 45 Motor Power (kw) 15

108

ID	MA38989
Make	Erfurt
Model	PKZV _1250
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity of Ton : 1250 STROKE LENGTH: 630mm SLIDE ADJUST: 600mm DIE HEIGHT: 1500mm STROKE PER MINUTE: 11 BLOSTER AREA : 5000 X 2500mm SLIDE ARE : 5000-2500mm DISTANCE BETWEEN COLUMNS : 4050 DIE CUSHION STROKE : 250mm ENJECTOR : 40 TON MAIN DRIVE POWER: 152KW /203HP FRONT MOVING BLOSTER POWER SUPPLY: 440V/60HZ APROXIMATE WEIGHT : 320

109

ID	MA38987
Make	Aizawa
Model	AC1-25N
YOM
Condition	Good Condition
Photo	See Photo
Stroke250 mm SPM25 - 50 Die Height 650 mm Slide Adjust:125 mm Bed Area:1600 x 900 mm Slide Area:900 x 700 mm With Die Cushion

110

ID	MA38986
Make	Aizawa
Model	AC1-11N
YOM
Condition	Good Condition
Photo	See Photo
Stroke180 mm SPM 50 Die Height 400 mm Slide Adjust 100 mm Bed Area1050 x 600 mm Slide Area650 x 450 mm With Die Cushion

111

ID	MA38985
Make	Nagao
Model	NCP-150SA
YOM
Condition	Good Condition
Photo	See Photo
Stroke:220 mm SPM-25 - 40 Die Height:500 mm Slide Adjust:80 mm Bed Area:1440 x 630 mm With Die Cushion

112

ID	MI11158
Make	Erfurt
Model
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity of Ton : 1250 STROKE LENGTH: 630mm SLIDE ADJUST: 600mm DIE HEIGHT: 1500mm STROKE PER MINUTE: 11 BLOSTER AREA : 5000 X 2500mm SLIDE ARE : 5000-2500mm DISTANCE BETWEEN COLUMNS : 4050 DIE CUSHION STROKE : 250mm ENJECTOR : 40 TON MAIN DRIVE POWER: 152KW /203HP FRONT MOVING BLOSTER POWER SUPPLY: 440V/60HZ APROXIMATE WEIGHT : 320

113

ID	MA38974
Make	JEIL
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity-800 Tons Slider Area:30001800 mm Bolster Area :30001800 mm Slider Stroke:600 mm Slider Stroke Adjust :600 mm Stroke Per Minute:20 spm Die Height:500 mm (min) Die Height:1100 mm(max) Main Motor :1306 kw Cushion Capacity:200 Ton Cushion Stroke:300 mm Cushion Pad (area):25001350 mm Air Pressure:5 kg/Cm

114

ID	MA38891
Make	SSANGYONG
Model	CS250
YOM	1994
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Stroke length - 250 mm Stroke per minute - 15-30 mm Die Height - 500 mm Slide adjust - 120 mm Slide area - 950x750 mm Bolster area - 1600x950 mm Bolster thickness - 150 mm

115

ID	MA38890
Make	SIMPAC
Model	CS250
YOM	2002
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Stroke length - 250 mm Stroke per minute - 15-35 spm Die Height - 550 mm Slide adjust - 120 mm Slide area - 1350x750 mm Bolster area - 1700x950 mm Bolster thickness - 150 mm Die Cushion Capacity - 16 Ton Stroke - 130 mm PAD area - 760x460 mm

116

ID	MA38889
Make	SIMPAC
Model	CS250
YOM	2013
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Stroke length - 250 mm Stroke per minute - 15-30 spm Die Height - 550 mm Slide adjust - 120 mm Slide area - 1050x750 mm Bolster area - 1600x950 mm

117

ID	MA38888
Make	Hwail
Model	HCA-300
YOM	2014
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Stroke Length - 300 mm Number of stroke - 35 spm Die Height - 600 mm Slide adjustment - 120 mm Slide area - 1500x800 mm Bolster area - 1800x950 mm Bolster Thickness - 180 mm Die Cushion Type: 1-PAD. 1-CYLINDER Capacity - 16 Ton Stroke Length - 130 mm PAD area - 650x450 mm Air pressure - 5 Kg/cm

118

ID	MA38887
Make	Dong Shin
Model	DCH-300P2
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Length of stroke - 300 mm Number of stroke - 30 spm Die Height - 800 mm Slide adjustment - 150 mm Slide area - 2400x1000 mm Bolster area - 2700x1100 mm With Die Cushion

119

ID	MA38886
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Tonnage: 1250 tons Bed Size: 5000 x 2400 mm SIDE moving bolster dimensions 4460 x 2400 (possible 5000 x 2400 mm) ram stroke 762 mm shut height 1530 mm adjustment 610 mm 8-18 stroke/min distance between columns 4300 mm

120

ID	MA38883
Make	Weinarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 100 Ton Table - x 1050 Table - y 700 Slide - piston rods 2 Table - width (mm) 1050 Piston rods 2 Slide - stroke - mm 80 Slide - x 920 Slide - number of strokes/minute 75-200 Mould mounting - tdc span (mm) 500 Slide - registration 60 Mould mounting - lateral window (mm) 300 Slide - stroke (mm) 80 Number of strokes / min 75-200 Stroke - mm 80 Weight 20 Ton

121

ID	MA38882
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 160 Ton Table - x 1300 Table - y 1000 Slide - x 1000 Slide - y 850 Table - width (mm) 1300 Slide - stroke (mm) 30 Slide - registration 60 Slide - number of strokes/minute 100-375 Slide - stroke - mm 30 Mould mounting - tdc span (mm) 405 External dimension - x (mm) 3450 Number of strokes / min 100-375 External dimension - height (mm) 4234 External dimension - weight (ton) 32 External dimension - y (mm) 1400 Electrical components - motor power (kw) 30 Accessories / other date COIL WIDHT 250mm Weight 32 Ton

122

ID	MA38881
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 250 Ton Table - x 1650 Table - y 1100 Table - width (mm) 1650 Slide - x 1530 Slide - stroke - mm 30 Slide - registration 100 Slide - stroke (mm) 30 Slide - y 900 Mould mounting - tdc span (mm) 430 Slide - number of strokes/minute 100 -300 External dimension - x (mm) 3570 External dimension - height (mm) 4950 External dimension - y (mm) 1400 Number of strokes / min 100 - 300 Accessories / other date COIL WIDTH 250 mm External dimension - weight (ton) 43 Electrical components - motor power (kw) 37

123

ID	MA38880
Make	TMP Voronezh Russian
Model	K4040
YOM	1985
Condition	Good Condition
Photo	See Photo
CAPACITY: 1000 Stroke: 900mm Number of strokes {- automatic 13;15;16} {- ⁠single 9,5;11;12} Close height : 1780mm Adjustment : 760mm Table : 4620x2464mm Slide : 4570x2440mm Nominal cushion force : 105t Cushion stroke : 305mm Max die weight : 29t Bolster plate thickness : 250mm Main motor : 160kW Press weight : 375t. Open height : 1600mm Table : 1600x1600mm Cushion size : 1250x1250mm Weight : 40t

124

ID	MA38877
Make	Seoul
Model	GSP2-300
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Stroke - 300 mm SPM - 30 Die Height - 800 mm Slide adjust - 150 mm Bolster area - 3000x1200 mm

125

ID	MA38876
Make	KMC
Model	KDH-300-1
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 300 Ton Stroke - 300 mm SPM - 30 Die Height - 750 mm Slide Adjust - 150 mm Bolster area - 2700x1200 mm

126

ID	MI11092
Make	Komatsu Japan
Model	OBS60
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity - 60 Ton Number of stroke - 42-85 spm Stroke length - 120 mm Die Height - 300 mm Slide adjustment - 70 mm Slide Dimensions - 450x350 mm Bolster Dimensions - 800x550x75 mm

127

ID	MA38840
Make	Weingarten
Model	VK 1000.48.85
YOM	1985
Condition	Good Condition
Photo	See Photo \| See Video
CAPACITY : 1000 TON Included desttacker system 3 axis transfer system Stroke in min. 8-16 Side stands window :4860 mm Biggest distance between Ram and tool plate: 1500 mm Ram stroke: 850 mm Ram adjustable :350 mm Ram 4500 x 2200 mm Table 4500 x 2200 mm Window in side stands 1800 mm Hight from tool plate 1300 mm Distance between stands 4530 mm Hight from floor untill tool plate 400 mm Hight over floor 9700 mm Main power 80-160 kW Power Ram adjustment 7,5kW Ram adjustment motor 1500 UpM Machine weight 338400 kg Cushion in table 288 t Cushion stroke 300 mm Cushion in Ram 100 t Ram cushion stroke 150 mm

128

ID	MI11086
Make	Double Elephant
Model
YOM	2020
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton

129

ID	MA38829
Make	Erfurt
Model	PKZV 1250FS
YOM	1981
Condition	Good Condition
Photo	See Photo \| See Video
CAPACITY : 1250 TON CONTINUOS RUN FREQUENCY, MIN -1: 11 MAX DHUT HEIGHT BETWEEN BLOSTER PLASTE AND SLIDE(STROKE DOWN ADJUSTMENT UP ):1250mm SLIDE STROKE :630mm MAXIMUM DRAWING DEPTH :250mm SLIDE ADJUSTMENT :630mm SLIDE DIMENSION LEFT TO RIGHT:3950mm SLIDE DIMENSION FRONT TO BACK 2500mm BLOSTER PLATE DIMENTIONS LEFT TO RIGHT:4000mm BLOSTER PLATE FRONT TO BACK : 2500mm HOLE IN BLOSTER LEFT TO RIGHT:3340mm HOLE IN BLOSTER FRONT TO BACK :1540mm DISTANCE BETWEEN COLUMNS :4000mm MOVING BLOSTER HEIGHT:630mm EJECTOR IN A SLIDER :250mm CUSHION IN THE BLOSTER: FORCE TON 400/ STROKE :250mm CUSHION PLATE SURFACE :3300 X 1520 POWER OF MAIN MOTOR KW : 132 HYDRAULIC PROTECTION DEVICE : 200/400 OVERALL DIMENSION LEF TO RIGHT:6875mm OVERALL DIMENSION FRONT TO BACK :4200mm OVERALL HEIGHT:15100mm OVERALL HEIGTH ABOVE FLOOR LEVEL : 10300mm WIEGHT OF THE MACHINE :200 TON

130

ID	MA38828
Make	Raster
Model	150/1400 NL-4S
YOM	1981
Condition	Good Condition
Photo	See Photo
CAPACITY : 150 Tons VARIABLE SLIDE STROKE VARIABLE SLIDE STROKE : mm 20 A 120 SLIDE ADJUSTMENT SLIDE ADJUSTMENT : mm 100 SLIDE DIMENSIONS (dxsx front-back) SLIDE DIMENSIONS (L-R x F-B) : 1460 x 620 mm TABLE DIMENSIONS (dxsx front-back) TABLE DIMENSIONS (L-R x F-B) : 1500 x 800 mm CONTINUOUS SPEED (variable) CONTINUOUS SPEED (variable) : spm 40-180 PASSAGE SIDE SIDE WINDOW : mm.500 x h.255 FRONT PASSAGE FRONT PASSAGE : mm.1460

131

ID	MA38824
Make	IHI,Japan
Model	SL4-1600-450-220
YOM	1985
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 1600 Ton Stroke - 850 mm SPM - 16 Slide adjust - 500 mm Die Height - 1400 mm Bolster area - 4500x2200 mm Die Cushion - ok

132

ID	MA38823
Make	Clearing
Model	S4-900-180
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY : 900 TON STRUCTURE: DOUBLE UPRIGTH SLED RACE : 940mm SLIDE ADJUSTEMENT:762mm PMI MOLD LIGHT:1412 SLED SIZE : 4572 X 2438mm TABLE SIZE : 4572 X 2130mm REMOVABLE CARRIAGE : PRESENT FRONT USEFUL PASSAGE:4622 LATERAL PASS IN THE SHOULDER : 1400mm HYDRAULIC SAFETY : PRESENT PILLOW IN THE BASE : PRESENT LOWER BANKING STROKE : 280mm

133

ID	MA38822
Make	Weingarten
Model	VK.1250.46.76
YOM
Condition	Good Condition
Photo	See Photo
Structure: Double Upright Capacity: 1250 Ton Table Size : 4460 X 2400 Push Point : n4 Sled Race : 762mm Vertical Light From The Mold Holder CBRA: 1530mm Sled Registration:610mm Removable Carriage: n2 Lateral Exit (Possible 5000mm Mould ) Height Of The Mould Holder Plate : 400mm No of Stroke : 8/18 Front Useful Passage: 4400mm Sheet Metal Passage in The Upright: 2400mm Hydraulic Safety : Present

134

ID	MA38816
Make	Kaiser
Model	KSTU 1600-12,5-3 PSR
YOM	1998
Condition	Good Condition
Photo	See Photo
Presskraft / Press Force 160 TON Hub / Stroke 30 - 90 mm Hubzahl / Stroke Rate 50 - 300 1 / min St�nderweite / Distance between Columns 1270 mm Seitlicher St�nderdurchgang / Side Window 440 mm Einbauh�he (gr.Hub oben, Verst. oben) / Daylight (max.Stroke up, Adjustment up) 590 mm Tischfl�che / Surface of Table 1250 x 900 mm Durchfall�ffnung im Tisch / Hole in Table 970 x 320 mm Tischh�he �ber Flur / Table Height above Floor 1000 mm St��elfl�che / Surface of Ram 1250 x 800 mm St��elverstellung / Adjustment of Ram 100 mm Materialbreite Vorschub / Material Width of Feeder 200 mm Materialst�rke Vorschub / Material Thickness of Feeder - 6,0 mm Vorschubl�nge / Feed Lenght 0 - 150 mm Antriebsleistung / Power Requirement 64,5 kW Gewicht / Weight 21,00 t Raumbedarf (BxTxH) / Dimensions (WxDxH) 3,7 x 2,2 x 3,75 m

135

ID	MA38808
Make	Weinarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Power (ton) -160 Number of conrods -2 Table dimensions ( x-y/mm) -1400 x 1100 Slide Dimensions X-Y (mm) -1400 x 900 Stroke (mm) -30 Strokes type -adjustable Stroke per minute from 30 to 600 Lateral window dimensions ( x-y/mm)- 600 Electric plant conditions -working

136

ID	MA38787
Make	Rotem
Model	S2-800-260-160
YOM	1997
Condition	Good Condition
Photo	See Photo \| See Video
ROTEM Tandem Line (800 - 600 - 400 - 400 tons) with all accessories available. including Bolster, Robert, Transfer system Make -Rotem Model -S2-800-260-160 Capacity -800 Ton Die Height - ax /in -1100/650 Standard Die Height -1000 mm Slide Stroke -600 mm Slide Adjust -450 mm Air -5 kg /cm2 Above bolster (Mold) -190 cushion Stroke -(max) - 220 Cushion Stroke -150 Ton No of stroke(SPM ) -8~20 Modl Moving (Crane) -20ton Bolster Size -LR -2500 mm FB-1600 mm Slide Size -LR -2500 mm FB-1600 mm Scrape Moving direction - Scrape Max Size -800 mm Productin (input /output)-Robot /Robot Make -Rotem Model -S2-600-260-160 Capacity -600 Ton Die Height - ax /in -1100/650 Standard Die Height -1000 mm Slide Stroke -600 mm Slide Adjust -450 mm Air -5 kg /cm2 Above bolster (Mold) -190 cushion Stroke -(max) - 220 Cushion Stroke -150 Ton No of stroke(SPM ) -8~20 Modl Moving (Crane) -20ton Bolster Size -LR -2500 mm FB-1600 mm Slide Size -LR -2500 mm FB-1600 mm Scrape Moving direction -FR,RR Scrape Max Size -800 mm Productin (input /output)-Robot /Robot Make -Rotem Model -S2-400-260-160 Capacity -400 Ton Die Height - ax /in -1100/650 Standard Die Height -1000 mm Slide Stroke -600 mm Slide Adjust -450 mm Air -5 kg /cm2 Above bolster (Mold) -190 cushion Stroke -(max) - 220 Cushion Stroke -150 Ton No of stroke(SPM ) -8~20 Modl Moving (Crane) -20ton Bolster Size -LR -2500 mm FB-1600 mm Slide Size -LR -2500 mm FB-1600 mm Scrape Moving direction -FR,RR Scrape Max Size -800 mm Productin (input /output)-Robot /Robot Make -Rotem Model -S2-400-260-160 Capacity -400 Ton Die Height - ax /in -1100/650 Standard Die Height -1000 mm Slide Stroke -600 mm Slide Adjust -450 mm Air -5 kg /cm2 Above bolster (Mold) -190 cushion Stroke -(max) - 220 Cushion Stroke -150 Ton No of stroke(SPM ) -8~20 Modl Moving (Crane) -20ton Bolster Size -LR -2500 mm FB-1600 mm Slide Size -LR -2500 mm FB-1600 mm Scrape Moving direction -FR,RR Scrape Max Size -800 mm Productin (input /output)-Robot /Robot

137

ID	MA38759
Make	AIDA
Model	NC2-250(2)
YOM
Condition	Good Condition
Photo	See Photo
Press with Bar Feeder pressurization ability 250 ton stroke length 280 mm Number of continuous strokes without load 20~38 spm die height 480 mm slide adjustment amount 120mm main motor 30 kW supply air pressure kgf/cm2 maximum upper suspension capacity 1650 kgf sudden stop time 180 ms maximum stopping time two handed operation 180 ms ray time 200 ms overrun monitoring device setting position +_3' Leveler feeder Model- LFM-400R coil plate width 60 ~ 400 mm coil plate thickness 0.4~3.2 mm coil inner dia 508 mm coil outer dia 800~1200mm feed length 10 ~ 400mm number of feeds ~ 38 spm main motor 3.0 kW Using air pressure 5 kgf/cal Use power 200.60 V.Hz

138

ID	MI11049
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
capacity : 1000 ton force punch holding ram : 1000 ton

139

ID	MI11044
Make	DEEP ludhiana
Model
YOM
Condition	Good Condition
Photo	See Photo
TONAGE - 50 TN TABLE - 26.5 X 20 INCH SHUT - 13 INCH

140

ID	MI11043
Make	DEEP ludhiana
Model
YOM
Condition	Good Condition
Photo	See Photo
TONAGE - 75 TON TABLE - 30 X 21 INCH SHUT - 15 INCH

141

ID	MI11041
Make	Verson
Model	S2-600-108-60T
YOM	1970
Condition	Good Condition
Photo	See Photo
Bed:108�x60� - 2700x1500mm Shut height: 32� (800mm) Stroke length: 12� (300mm) Slide adjustment: 10� (250mm) T-slot bolster Thick: 8� (32mm) Stroke/min: 20 With 3 Cushion Approx weight: 90 Tons

142

ID	MA38727
Make	SIMPAC
Model	SS-350
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Capacity:350 Tons Stroke Length:300 mm Stroke Per Minute:15-30/14 spm Die Height::550 mm Slide Adjust:150 mm Slide area (LrFb):9001000 mm Bolster Area (lrfb):10001100 mm Main Motor:37 kw 4P(v.s) Adjust Motor:1.5 kw 4p Power Voltage:380 vac Die Cushion Capacity :20 Ton Stroke :130 mm Pad Area ( LrFb): 540 420 mm

143

ID	MA38726
Make	Komatsu
Model	E2G300U
YOM	1988
Condition	Good Condition
Photo	See Photo
CAPACITY - 300 TON STROKE (360 mm) 14.2" DIE HEIGHT (S.D.A.U.) (719 mm) 28.3" SLIDE ADJUSTMENT (260 mm) 10.2" SLIDE AREA (2200 mm X 1400 mm) 86.6" LR X 55.1" FB BOLSTER AREA (2200 mm X 1400 mm) 86.6" LR X 55.1" FB SPM VARIABLE 12-40 EQUIPPED WITH KOMATSU PRESS CONTROL CONSOLE OMNILINK II PRESS OPERATOR TERMINAL HYDRAULIC OVERLOAD (RAM) PRESS CONTROL T-STAND SHADOW 8 WINTRISS LIGHT CURTAINS 36" W X 40" H WINDOWS 7" THICKNESS T-SLOTTED BOLSTER T-SLOTTED SLIDE BOLSTER PRESS MANUAL OMNILINK II MANUAL APPROX. O.A. DIMENSIONS 12' LR X (7' FB AT BASE), X (12'6" AT TOP) X 18'-6" H ESTIMATED WEIGHT 125,000 LBS

144

ID	MA38716
Make	Komatsu
Model	LIC630
YOM	1985
Condition	Good Condition
Photo	See Photo \| See Video
Capacity 630 tons Strokes 45 spm Slide stroke 180 mm Die height 520 mm Slide adjustment 50 mm Slide dimensions 800 x 600 mm Bolster dimensions 800 x 700 x 120(T) mm

145

ID	MI11031
Make	Samho
Model	SHC-250
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY: 250 TON STROKE: 250 TON NUMBER OF STROKE: 30 SPM DIE HEIGTH: 550 mm SLIDE ADJUSTMENT :120mm BLOSTER AREA : 1600 x 1900mm SLIDE AREA : 1250 X 800 BLOSTER THIKNESS: 210mm DIE OF SHANK: 65mm FRAME GAP :60mm MAIN MOTOR :V.S.30 X 4 kwxp SLIDE ADJUSTING MOTOR:1.5X4 kwxp AIR PRESSURE:5kg/cm2

146

ID	MA38709
Make	Amada
Model	SW300S
YOM	1993
Condition	Good Condition
Photo	See Photo
Pressure Capacity -300Ton Number of Strokes 15-30 S.P.M Stroke Length 400mm Die Height 650mm slide adjustment amount 200mm maximum stop time 173 ms overrun monitoring device / setting position 10 power supply 200 phase Hz motor 37 kw mechanical weight 13 ton

147

ID	MA38698
Make	AIDA
Model	C2-20(2)
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Stroke length - 250 mm Stroke per minute - 20~45 SPM Slide area - 1850x650 mm Bolster area - 2420x840 mm Die Height - 500 mm Slide adjustment - 110 mm Main motor - 15 kw Feeder Make - Aida YOM - 1980 Coil outer diameter - 1500 mm Coil Inner diameter - 508 mm Coil width - 50~200 mm Coil weight - 3000x2 kg

148

ID	MI11011
Make	AIDA
Model	SMX-L2-400(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Slide stroke - 510 mm Stroke per minute - 15~30 SPM Die Height - 870 mm Slide adjustment - 300 mm Slide area - 2750x1250 mm Bolster area - 2750x1400 mm Main motor - 75 kw

149

ID	MI11009
Make	AIDA
Model	NS2-3000(1)
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 300 Ton Slide stroke - 300 mm Stroke per minute - 15~35 SPM Die height - 650 mm Slide adjustment - 130 mm Slide area - 2400x300 mm Bolster area - 2600x1200 mm Main motor - 37 kw Max. Upper die weight - 2300 kg

150

ID	MI11008
Make	AIDA
Model	NS2-2000(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Slide stroke - 250 mm Stroke per minute - 25~50 SPM Die Height - 500 mm Slide adjustment - 110 mm Slide area - 1850x650 mm Bolster area - 2150x840 mm Main motor - 22 kw Max. Upper die weight - 1200 kg

151

ID	MI11007
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Press Line 600-400-500-800-800-1200 Make -Fukui Capacity - 600t Make - Fukui Capacity - 400t Make - Fukui Capacity - 500t Make - Fukui Capacity - 800t Make - Fonyu Capacity - 800t Make - Fonyu Capacity - 1200t

152

ID	MI11005
Make	AIDA
Model	NCS-250(1)
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Slide stroke - 170 mm Stroke per minute - 25~55 SPM Die Height - 450 mm Slide adjustment - 120 mm Slide area - 2100x700 mm Bolster area - 2400x920 mm Main motor - 30 kw

153

ID	MI11003
Make	Shimomura
Model	DCP-200-15B
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 200 Ton Slide area - 1400x1000 mm Bolster area - 1500x1200 mm Stroke length - 500 mm Number of stroke - 12 SPM Slide adjustment - 200 mm Die Height - 800 mm Main motor - 30 kw Die cushion capacity - 20 ton Cushion stroke - 260 mm Cushion pad area - 800x800 mm Balance capacity - 2.8 ton

154

ID	MI11002
Make	HIM
Model	HSD-600
YOM	2011
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Stroke Length - 450 mm Number of stroke - 24 spm Die Height - 860 mm Slide adjustment - 250 mm Slide area (LRxFB) - 2500x1600 mm Bolster area (LRxFB) - 2500x1600 mm Bolster Thickness - 250 mm Main motor - 75x4 Kwxp Slide adjustment motor - 5.5x6 Kwxp Air pressure - 5 kg/cm Main Voltage - 440x60 VxHz Die Cushion Type - 1-PAD.2-Cylinder Capacity - 40x2= 80 Ton Stroke length - 0~200 mm Pad area - 2000x1090 mm Air pressure - 5 kg/cm Adjust motor - 3.7x6 KwxP

155

ID	MI11001
Make	SIMPAC
Model	DE2P-600
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Stroke Length - 600 mm Strokes per minute - 10-20/12 spm Die Height - 1200 mm Slide Adjust - 600 mm Slide area (LRxFB) - 2800x1700 mm Bolster area (LRxFB) - 2800x1700 mm Bolster Thickness - 250 mm Main Motor - 90x4 (D.C) KWxP Adjust motor - 5.5x6 KWxP Die Cushion Capacity - 100 ton Stroke - 0-300 mm Pad area - 2150x1100 mm Adjust motor - 2.2x6 KWxP

156

ID	MI11000
Make	Komatsu
Model	E2G300
YOM	1999
Condition	Good Condition
Photo	See Photo
Maximum Capacity:300 tons Number Of Slide Strokes :15-25 spm Slide Sroke:450 mm Die Height(Bolster To Slide Sdau):650 mm Slide Adjustment:200 mm Slide Dimensions(LRFB):1900mm1200 mm Bolster Dimensions (LR*FBThickness):2100mm1350 mm180 mm) Same model 3 presses available.

157

ID	MA38692
Make	Komatsu
Model	H2F300
YOM	2004
Condition	Good Condition
Photo	See Photo
Stroke speed :760mm/ Stroke length: 30-250mm Die height: 550mm Adjustment amount: 100mm Slide : 2150�900mm Bolster: 2150�1000�250mm WITH Feeder [SONORUKA NSD-60] Plate thickness: 0.6-6.0mm Plate width: 70�600mm Plate thickness x plate width: 0.6�220/3.2�600 Coil outer diameter: 700-1400mm Coil inner diameter: 508mm Year: 2003

158

ID	MA38689
Make	Schuler
Model
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity -800 Ton Table 2400 x 1500mm

159

ID	MA38681
Make	AIDA
Model	NC1-2500
YOM	2005
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 Ton STROKE - 300 mm RAM ADJUSTMENT - 120 mm STROKING RATE - 20-40 s.p.m DIE HEIGHT - 540 mm TABLE AREA - 1750x900 mm RAM AREA - 1100x730 mm TABLE THICKNESS - 180 mm DEPTH OF THROAT - 470 mm MOTOR - 22 kW DIMENSIONS: WIDTH: 2180 mm DEPTH: 2560 mm HEIGHT: 4350 mm WEIGHT OF PRESS - 28T

160

ID	MA38679
Make	AIDA
Model	NC1-2000(2)
YOM	1995
Condition	Good Condition
Photo	See Photo
CAPACITY - 200T STROKE - 250 mm RAM ADJUSTMENT - 110 mm STROKING RATE - 25-45 s.p.m DIE HEIGHT - 550 mm TABLE AREA - 1390x840mm RAM AREA - 880x650 mm TABLE THICKNESS - 180 mm TABLE HEIGHT ABOVE GROUND - 1060 mm MOTOR - 15 kW DIMENSIONS: WIDTH: 1800 mm DEPTH: 2560 mm HEIGHT: 3800 mm WEIGHT OF PRESS - 23T

161

ID	MA38677
Make	Nagao
Model
YOM
Condition	Good Condition
Photo	See Photo
Make - Nagao Model - NCP-2000A YOM - 1981 Capacity - 200 Ton Bed area - 1450x900 mm Stroke length - 180 mm Stroke per minute - 40 spm Die Height - 285 mm Adjustment of slide - 196 mm Make - Nagao Model - NCP-2000 YOM - 1980 Capacity - 250 Ton Bed area - 1450x800 mm Stroke length - 250 mm Stroke per minute - 25-45 spm Die Height - 500 mm Adjustment slide - 105 mm

162

ID	MI10996
Make	Komatsu
Model	K-250
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 TONS BOLSTER AREA - 2700 X 900 X 150 mm. SLIDE AREA - 2100 X 700 mm. MAX DIE HIGHT - 550 mm. SLIDE ADJUST - 120 mm. STROKE LENGTH - 300 mm. STROKE PER MINUTE UNDER NO LOAD - 15 -35 pm.

163

ID	MI10995
Make	JAIMAC
Model	JH25-250
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 TONS BOLSTER AREA - 902 X 2700 mm. SLIDE AREA - 470 X 550 mm. MIN DIE HIGHT - 430 mm. MAX DIE HIGHT - 550 mm. SLIDE STROKE - 305 mm. SLIDE ADJUST - 120 mm. STROKE - 280 mm. TROKE PER MINUTE UNDER NO LOA 20-35 SPM MAX. LOAD COIL 3 TON

164

ID	MI10994
Make	Amada
Model	SW200
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 200 TONS BOLSTER AREA - 1800 X 1300 mm. SLIDE AREA - 1500 X 1000 mm. MIN DIE HIGHT - 375 mm. MAX DIE HIGHT - 500 mm. SLIDE ADJUST - 175 mm.

165

ID	MI10993
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 200T BOLSTER AREA - 1070 X 1520 mm. SLIDE AREA - 1000 X 1360 mm. MAX DIE HIGHT - 550 mm. MIN DIE HIGHT - 425 mm. SLIDE ADJUST - 135 mm. REQUIRE AIR PRESSURE - 0.5MPa.

166

ID	MA38671
Make	Amada
Model	TPW200C
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Stroke per minute - 40-75spm Die Height - 430 Adjustment - 110 Slide area - 1850x850 mm Bolster area - 2400x700 mm

167

ID	MA38661
Make	AIDA
Model	NC2-250(2)
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity- 250 Ton Stroke per minute - 20-35s pm Die Height - 550 mm Adjustment - 120 mm Slide area - 2100x700 Bolster area - 2700x920 Motor: 30kw Frame crack repaired

168

ID	MA38660
Make	AIDA
Model	NC1-200
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Stroke per minute - 35-70 spm Die Height - 410 Adjustment - 110 mm Slide area - 880x650 mm Bolster area - 1390x680 mm

169

ID	MA38659
Make	Amada
Model	TP-200EX
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Stroke Length - 250 mm Stroke per minute - 25~45 spm Die Height - 460 mm Slide Adjustment - 110 mm Slide area - 850x630 mm Bolster area - 1450x850 mm With Die Cushion Machine Weight - 24000 kg

170

ID	MA38658
Make	AIDA
Model	NC1-200
YOM	1997
Condition	Good Condition
Photo	See Photo
Slide Area: 880mmx650mm Stroke: 250mm Die Height: 450mm SPM: 25~45 Slide Adjustment: 110mm Bolster size: 1390mmx850mm Power: 15 Kw.

171

ID	MA38654
Make	Roche
Model	MBV100
YOM
Condition	Good Condition
Photo	See Photo
Pressure 100 ton Table 1100 x 900 mm Ram travel 100 mm Slide adjustment 80 mm Strokes por minute 35 - 55 Max. distance between table/ram 600 mm Lateral gap 300 mm Power 7,5 Kw Electronic feeder SARONNI (year 1995 - mod. 64/127/300E)

172

ID	MI10982
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 400 Ton Slide area - 2100x1500 mm Press stroke - 457 mm SPM - 13 Shut Height max. - 765 mm Shut Height min. - 465 mm Slide adjustment - 300 mm Cushion area - 1250x800 mm Cushion stroke - 165 mm Cushion ton - 80 Ton Weight - 65 Ton

173

ID	MI10981
Make	HMT
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 300 Ton Slide area - 2500x1600 mm Press stroke - 400 mm SPM - 18 Shut Height max. - 800 mm Shut Height min. - 500 mm Slide adjustment - 300 mm Cushion area - 1200x800 mm Cushion stroke - 200 mm Cushion - 80 Ton Main Motor - 75 hp Weight - 70 Ton

174

ID	MI10980
Make	Sharma
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 200 Ton Slide area - 2000x1250 mm Press stroke - 400 mm SPM - 32 Shut Height max. - 565 mm Shut Height min. - 365 mm Slide Adjustment - 200 mm Cushion area - 1300x800 mm Cushion stroke - 200 mm Cushion ton - 40 ton Main Motor - 30 hp Weight - 30 Ton

175

ID	MI10979
Make	Wasino,Japan
Model	CS1-400
YOM	1974
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Die Height - 500 mm Stroke Length -80 mm 20-45 SPM Left and right back and right - 900 x900 mm Boolster Area -Left and right around and After - 1000 x 1000 mm Adjustment Electric Motor -30 kw 4p Adjustment Moptor -2.2

176

ID	MA38648
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1994
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 250 Ton Stroke 280mm, SPM 20-38, Die Height 480mm, Slide adjustment 120mm, Without Die cushion

177

ID	MI10974
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton 2000#1200mm

178

ID	MA38616
Make	Clearing
Model	S4-900-180
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 900 Ton Table size - 4572x2130 mm Sled size - 4572x2438 mm Sled race - 940 mm Slide adjustment - 762 mm Number of stroke - No.16 PMI mold light - 1412 mm Front useful passage - 4622 mm Lateral pass in the shoulder - 1400 mm Removable carriage - present Hydraulic Safety - present pillow in the base - present Lower blanking stroke - 280 mm

179

ID	MA38610
Make	Komatsu
Model	L2M500-3BM
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Slide area - 2450x1150 mm Bolster area - 2450x1250x280 mm Shut height - 700 mm Slide stroke - 300 mm Number of slide stroke - 25-60 spm Slide adjustment - 150 mm

180

ID	MA38609
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
200-300-300-300-300 Line 1) Make - Komatsu Model - E2G 200 YOM - 1984 Capacity - 200 Ton Slide area - 1850x1000 mm Number of strokes - 18-35 spm Stroke Length - 300 mm Shut height - 600 mm Slide adjustment - 200 mm 2) Make - Aida Model - PD-30 YOM - 1982 Capacity - 300 Ton Slide area - 1900x1200 mm Bolster area - 2100x1350 mm Stroke length - 450 mm Strokes per minute - 15-25 spm Die height - 675 mm Slide adjustment - 200 mm Main motor - 37 kw 3) Make - Komatsu Capacity - 300 Ton 4) Make - Komatsu Model - E2G 300 YOM - 1985 Capacity - 300 Ton Slide area - 1900x1200 mm Bolster area (LRxFBxThickness) - 2100x1350x180 mm Shut height - 650 mm Stroke Length - 450 mm Number of strokes - 15-25 spm 5) Make - Komatsu Model - F2Q 300 YOM - 1985 Capacity - 300 Ton Slide area - 2500x1200 mm Bolster area (LRxFBxThickness) - 2500x1300x180 mm Shut height - 650 mm Number of strokes - 15-25 mm Slide adjustment - 200 mm

181

ID	MA38608
Make	Fagor
Model	LE4-2000-5000-2500
YOM	2016
Condition	Good Condition
Photo	See Photo
PRESS FORCES total force (nominal) 2000 to ________________________________________ PRESS TABLE clamping surface (left-right) 5000 mm clamping surface (front-back) 2500 mm tool weight max. 60000 kg height above floor level 760 mm ________________________________________ RAM clamping surface (left-right) 5000 mm clamping surface (front-back) 2500 mm stroke 1000 mm tool weight max. 25000 kg ________________________________________ RAM (MECHAN. PRESS) ram adjustment 600 mm number of strokes min 8 /min number of strokes max 18 /min ________________________________________ DIE CUSHION (TABLE CUSHION) number of cushions 1 force of cushion 400 to stroke 325 mm clamping surface (left-right) 4300 mm Indicative additional Professional dismantling costs are at Euro 160.000,-- (one hundred sixty thousand) but subject to final confirmation. clamping surface (front-back) 2100 mm working principle hydraulically regulated yes ________________________________________ TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up) 1500 mm distance between columns (H-frame) 5330 mm Free passage between side columns (width) 2850 mm Free passage between side columns (height) 2310 mm ________________________________________ ELECTRICAL SPECIFICATIONS total power consumption 200 kW mains voltage 400 V mains frequency 50 Hz ________________________________________ DIMENSIONS / WEIGHTS height above floor level 9630 mm ________________________________________ TECHNICAL DESCRIPTION Modern mechanical link-drive press for tool tryout operations in pristine condition. Features: Moving bolster, hydraulic cushion ( 4 Cylinder ) in table section, mico-inch mode, single stroke, automatic mode, reverse mode. Control unit BECKHOFF, Siemens S7, ethernet and profibus connections. Indicative additional Professional dismantling costs are at Euro 160.000,-- (one hundred sixty thousand) but subject to final confirmation.

182

ID	MA38600
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Bolster size - (FxB) 1880 mm (LxR) 2450 mm Pitch Clamp 200 mm Slide size - (FxB) 1880 mm (LxR) 2450 mm Pitch Clamp 200 mm Die Height - Min 700 mm Max 950 mm Shut Height - 670 mm Slide stroke - 350 mm Slide Adjust - 250 mm Stroke per minute - 10-12

183

ID	MA38597
Make	SIMPAC
Model	DE2P-600-43
YOM	2013
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Stroke Length - 600 mm Strokes per minute - 10-20/12 spm Die Height - 1250 mm Slide Adjust - 600 mm Slide area (LRxFB) - 3000x1600 mm Bolster area (LRxFB) - 3000x1600 mm Bolster Thickness - 250 mm Main Motor - 90x4 (D.C) KWxP Adjust motor - 5.5x6 KWxP Die Cushion Capacity - 100 ton Stroke - 0-300 mm Pad area - 2300x1100 mm Adjust motor - 2.2x6 KWxP

184

ID	MA38596
Make	Fonyu
Model	400
YOM	2006
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Stroke - 350 mm Stroke per minute - 20-40 spm Die Height - 700 mm Area of Slide - 2500x1500 mm Area of bolster plate - 2500x1500 mm Slide adjustement - 200 mm Main motor - 15 HP

185

ID	MA38580
Make	Balconi
Model	MTS/V
YOM	1980
Condition	Good Condition
Photo	See Photo
Board - width (mm) 800x500 Number of strokes/min 100/400 Subtype (DM/CDC) CDC 1B CE mark No Revision 2019 Conditions working Drive system (eccentric/link motion/knucle joint/hydraulic/screw fly) Eccentric Sled - width (mm) 450x370 Slide - adjustable stroke (mm) 0/90 Slide - registration (mm) 50 Push points 1 Slide - number of guides 8 Slide - adjustment system (guided/ball/wedge) Driven Blank holder cushion - total force (ton) No External dimensions - width (mm) 1500 External dimensions - depth (mm) 1500 External dimensions - height above ground (mm) 3000 Weight (tons) 4,5 Foundation (cm) No Motor power (kw) 2/8 Electrical panel conditions (working, missing, overhauled, to be overhauled) working Photocells (front/rear) No Safety guards (front/rear) No Overload (hydraulic/mechanical) No Accessories / other data Mechanical roller feeder

186

ID	MA38579
Make	Balconi
Model
YOM	1982
Condition	Good Condition
Photo	See Photo
Table - x (mm) 400 Table - y (mm) 600 Slide - x (mm) 400 Slide - y (mm) 400 Table - width (mm) 400 Slide - registration (mm) 50 Slide - stroke (mm) 11/90 Number of strokes / min 100/ 400 Number of strokes/minute 100 /400 Piston rods 1 Tdc span (mm) 400 Lateral window (mm) 220 Subtype (DM / CDC) DOUBLE UPRIGHT Table - depth (mm) 600 Slide - width (mm) 400 External dimensions - height (mm) 2600 External dimensions - x (mm) 1600 Weight (ton) 7 Motor power (kW) 2 Slide - depth (mm) 400 External dimensions - y (mm) 1000 Electrical components - other infos ORIGINAL Electrical panel conditions (working/missing/complete inspection/inspection required) WORKING Accessories / other date MECHANICAL REELS FEEDER Push points 1 Light pms (mm) 400 Side window between the uprights (mm) 220 External dimensions - depth (mm) 1000 External dimensions - height above ground (mm) 2600 Motor power (kw) 2 Electrical panel conditions (working, missing, overhauled, to be overhauled) WORKING Electrical components - more info ORIGINAL - MECHANICS Accessories / other data ROLLER MECHANICAL FEEDER

187

ID	MA38578
Make	PIOVAN
Model	2M2B
YOM	1982
Condition	Good Condition
Photo	See Photo
Board - width (mm) 700X500 Number of strokes/min 85-720 Subtype (DM/CDC) DM Revision 2020 Drive system (eccentric/link motion/knucle joint/hydraulic/screw fly) ECCENTRIC Sled - width (mm) 700 x 500 Push points 2 Slide - adjustment system (guided/ball/wedge) DRIVEN Light pms (mm) 400 Side window between posts (mm) 250 External dimensions - width (mm) 1500 x 1200 External dimensions - depth (mm) 3000 Weight (tons) 10 Motor power (kw) 40 Electrical panel conditions (working, missing, overhauled, to be overhauled) missing Photocells (front/rear) Yes Safety guards (front/rear) Yes Conditions WORKING Slide - adjustable stroke (mm) 0-50 Slide - registration (mm) 50 Slide - number of guides 8 Accessories / other data MECHANICAL ROLLER FEEDER

188

ID	MA38577
Make	Kaiser
Model	KSTU 2000-17,5-4PR
YOM	1999
Condition	Good Condition
Photo	See Photo
Press force: 200t Stroke rate min-max: 30-180 Stroke adjustment mm: 125 Stroke mm (from � to): 20-160 Press table mm (length / width): 1000/1750 Min. daylight of die mm (max. stroke � min. stroke): 225-295 Max. daylight of die mm (max. stroke � min. stroke): 350-420 Press table waste hole mm (width / length feed): 300/1450 Ram size mm (length / width): 1750/900

189

ID	MI10905
Make	Chin Fong,Taiwan
Model	OCP-110
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity: 110 Ton Stroke: 180mm Bed Size: 1150x 600mm Ram Size: 650 x 470mm Die Height: 350mm Adjustment: 80mm SPM: 50 With Die cushion

190

ID	MA38576
Make	Haulick & Roos
Model	RVD-150
YOM
Condition	Good Condition
Photo	See Photo
Max. width: 300mm Max. Dicke: 3mm Number of rolls: 7 Press with desk next to it: Haulick & Roos RVD 150-1500V Eccentric press with double connecting rod with 4-way bearing eccentric shaft No: 1204647 BJ: 1992 Press force: 1500kN Speed: 20-180/min. Drive: 25kW Ram stroke: 8-120mm Ram adjustment: 100mm Table with support balls: 1470x820mm Diarrhea hole: 1320x90-250mm Table above hallway: 1200mm Stand width: 1500mm Stand width at the side: 400mm Installation height max. stroke bottom/ram top: 380mm Space requirement for the press (LxWxH): 3750x1800x3400mm Control cabinet (LxWxH): 1800x500x1900mm Weight: 25,000kg Feed: Haulick & Roos RS 260SL/180�/2802 Max. feed length 260mm Max. width 260mm Max. Dicke 3mm Feed speed 60m/min. Material cross section up to 800mm�

191

ID	MA38575
Make	HAULICK & ROSS
Model	RVD-80-800NS
YOM
Condition	Good Condition
Photo	See Photo
Max. width: 300mm Max. Dicke: 3mm Number of rolls: 5 Press with desk next to it: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-way bearing eccentric shaft No: 1203697 BJ: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm Ram adjustment: 80mm Tisch: 800x640mm Diarrhea hole: 780x60-160mm Table above hallway: 1240mm Stand width: 780mm Side stand width: 350mm Installation height max. stroke below/top plunger: 300mm Space requirement press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x1900mm Weight: 12,000kg Feed: Haulick & Roos RS 260/120�/2727 Max. feed length 260mm Max. width 260mm Max. Dicke 3mm Feed speed 40m/min. Material cross section up to 800mm�

192

ID	MA38565
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo
Bed: 144� x 84� Stroke: 30� Shut height: 58� Adjustment: 14� Strokes per minute: 10-18 (Variable) Windows Dual Rolling bolsters (left-to-right) Siemens S7 press controls

193

ID	MA38562
Make	Spiertz
Model	F4E100-40
YOM	Electrically refurbished In 2015
Condition	Good Condition
Photo	See Photo
Capacity � 1000 Metric tons / 1100 US Tons Bed: 160� x 92.5� (4000mm x 2350mm) Stroke: 28� (700mm) Die height: 42.5� (1080mm) Adjustment: 16� (400mm) Strokes per minute: 16 Die cushions (0-260mm stroke, 300 tons) Windows � Can be installed Windhoff Die cart/Die table Quick Die Change system

194

ID	MA38554
Make	WMW Erfurt,Germany
Model	S4-1250-500-250
YOM	1986
Condition	Good Condition
Photo	See Photo
Stroke Length :630 mm Slide Adjust :600 mm Die Height :1500 mm Stroke Per Minute 11 Bolster Area :50002500 mm Slide Area :50002500 mm Distans Between Columns :4050 mm Die Cushion 250 Ton Cushion Stroke :250 mm Ejector :40 Ton Main Drive Power :152 Kw ,203 HP Front Moving Bolster Power Supply 440 V /60 HZ Approximate Weight:320 Ton

195

ID	MA38542
Make	Sino
Model	LDP-200
YOM	2015
Condition	Good Condition
Photo	See Photo
Capacity -200 Stroke Length -150 mm Stroke Per Minute -35 -70 S.P.M Die Height -450 mm Slide Adjustment- 80 mm Slide Area (LR X FB ) -1800 x 700 mm Bolster Area (LR X FB )-2000 X 800 mm Bolster Thickness - 170 mm Air Pressure - 5 Kg/cm

196

ID	MA38529
Make	Chin Fong,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Table size: 1,400 x 840 mm. Slide size: 800 x 650 mm. Slide adjustment: 55 mm. Strokes per min.: 30-50 c/min. Stroke: 250 mm. Mold light at PMI: 450-395 mm

197

ID	MA38528
Make	Chin Fong,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Table size: 1,400 x 840 mm. Slide size: 800 x 650 mm. Slide adjustment: 110 mm. Strokes per min.: 45-65 c/min. Stroke: 200 mm. Mold light at PMI: 450-340 mm. Hydraulic Safety: present

198

ID	MA38527
Make	Amada
Model
YOM
Condition	Good working condition
Photo	See Photo \| See Video
Table size: 1,450 x 850 mm. Slide size: 850 x 630 mm. Slide adjustment: 110 mm. Strokes per min.: 45 c/min. Stroke: 250 mm. Mold light at PMI: 485-595 mm. Same model 2 press available

199

ID	MA38526
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Table size: 2,700 x 760 mm. Slide size: 2,100 x 700 mm. Slide adjustment: 100 mm. Strokes per min.: 25-55 c/min. Stroke: 130 mm. Mold light at PMI: 560-430 mm. Hydraulic Safety: present

200

ID	MI10860
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton

201

ID	MA38501
Make	Komatsu
Model	M/C400T
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CAPACITY : 400 TON STROKE:840 STROKE STROKE PER MIN: 13 STROKE DIE HEIGHT : 1120mm SLIDE ADJUSTMENT: 800 TO 1120mm SLIDE AREA:3840 x2180x226mm BLOSTER AREA:3840x2180x 240mm MAIN MOTOR :65KN 6P

202

ID	MA38487
Make	Mossini
Model	PDM/2BX 800
YOM	1998
Condition	Good Condition
Photo	See Photo
Power 800 Ton Number of conrods 2 Table dimensions ( x-y/mm) 3600 x 2100 Stroke (mm) 600 Slide Adjustment (mm) 250 Light at T.D.C.*(mm) 1400 Stroke per minute 13-20 Accessories frontal moving bolster

203

ID	MA38461
Make	Balconi
Model	MTRS/L
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity - 120 ton Table area - 1000x600 mm Number of strokes - 55 Slide area - 600x400 mm Slide adjustable stroke - 10-140 mm Slide adjustment - 80 mm Motor - 10 kw External dimensions depth - 1300 x 1700 mm External dimensions height above ground - 3300 mm Weight - 10 ton

204

ID	MA38460
Make	Agostino Colombo
Model	C100
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity - 100 ton Table area - 1000x700 mm Number of stroke - 65 Slide area - 700x500 mm Slide adjustable stroke - 0:170 mm Slide adjustment - 80 mm Motor - 7.5 kw Weight - 5.5 ton

205

ID	MA38459
Make	Balconi
Model	MTRS/L
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Table area - 1000x600 mm Number of stroke - 60 Slide area - 550x440 mm Slide adjustable stroke - 10-140 mm Slide adjustment - 90 mm External dimensions width - 1785 mm External dimensions depth - 1900 mm External dimensions height above ground - 3400 mm Weight - 14 ton Same model 2 machines available

206

ID	MA38458
Make	Raimondi
Model	RF80R
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity - 80 Ton Table area - 900x580 mm Number of stroke - 65 Slide area - 500x400 mm External dimensions width - 1200 mm External dimensions depth - 1400 mm External dimensions height above ground - 3000 mm Motor power - 6 kw Slide adjustable stroke - 10-120 mm Slide registration - 100 mm Weight - 5-6 ton

207

ID	MA38457
Make	Techno
Model	TPR/180
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity - 80 Ton Table area - 850x500 mm Number of strokes - 75 Slide area - 450x400 mm Slide adjustable stroke - 17-120 mm Slide adjustment - 80 mm External dimensions width - 1000 mm External dimensions depth - 1200 mm External dimensions height above ground - 2800 mm Weight - 4 Ton

208

ID	MA38451
Make	Clearing
Model	S2-500-120-54
YOM	2008
Condition	Good Condition
Photo	See Photo
Bed Area: 54� x 120� Window: 46� x 60� Wide Centerline of Ram to Gap: 26� Distance Between Housings: 90� Slotted Ram for Knock Outs Stroke: 26� Strokes Per Minute: 12 to 34 Slide Adjustment: 12� (AC Motor Driven) Shut Height: 37� Enclosed Gears Top Plate: 10� Thick 9� T-Slot Bolster with 5� Thick Plate Tray System for Compound Blanking If Necessary 40 HP Variable Speed Motor Electrical 460/3/60, Air and Lubrication System

209

ID	MA38446
Make	Danly
Model	S4-800-110-72
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 800Ton Dimensions : 2800mm x 1849mm Ram : 610mm Adjustment : 510mm SPM : 0-18 Variable Bed Size : 2800mm x 1849mm Weight : 160Ton Approx

210

ID	MA38445
Make	Schuler
Model	E4-1200-3,5-0.6
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 1200Ton Number of Connecting Rod : 4 Slide Stroke : 600mm Shut Height From Top of Bolster SDAU : 1250mm Slide Adjustment : 500mm Slide Dimensions(L-R X F-B) : 3500mm x 1900mm Bolster Dimensions(L-R X F-B) : 3500mm x 1900mm Bolster Height : 300mm Speed : SPM16 Weight : 250Ton Cushion Stroke : 250mm Main Motor Power : 200kW Dimensions : Clearance Between Uprights (L-R) : 3600mm Clearance Between Uprights (F-B) : 1600mm

211

ID	MA38444
Make	Schuler
Model	T2-800
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 800Ton Number of Connecting Rod : 2 Slide Stroke : 650mm Shut Height From Top of Bolster SDAU : 1000mm Slide Adjustment : 100mm Slide Dimensions (L-R x F-B) : 3600mm x 1500mm Table Dimensions ( L-R x F-B) : 3600mm x 1500mm Front Passage : 3800mm Side Window : 1550mm SPM : 8 - 25 Main Motor Power : 75kw

212

ID	MA38443
Make	Weingarten
Model	S1000-04-75
YOM	1982
Condition	Good Condition
Photo	See Photo
Drive kinematics - eccentric-Linkdrive Capacity - 1000 Ton A20 mm Slide stroke - 700 mm Shut height from top of bolster, SDAU - 1400 mm Slide adjustment - 400 mm Slide area - 3150x1900 mm Bolster area - 3150x1900 mm Number of moving bolster - 2 Moving bolster exit - Front/Back Continuous Speed (variable) - 8-22 SPM Side window - 2200 mm x 2150 h Front passage - 3600 mm Cushions - Yes/ 4x50 ton stroke 250 mm

213

ID	MA38442
Make	Danly
Model	S4-800-132-72
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 800Ton Dimensions : 3350mm x 1830mm Ram : 610mm Adjustment : 510mm SPM : 16 Bed Size : 3350mm x 1830mm Weight : 180Ton Approx.

214

ID	MA38441
Make	Mecfond
Model	S4-1000-4000x2140
YOM	2018
Condition	Good Condition
Photo	See Photo
Capacity - 1000 Ton Drive Kinematics - eccentric Capacity - 1000 Ton Capacity rating distance from BDC - 12.7 mm Number of connecting rods - 4 Slide stroke - 711 mm Shut height from top bolster, SDAU - 1600 mm Slide adjustment - 457 mm Slide area - 4000x2140 mm Bolster area - 4000x2140 mm Number of moving bolsters - 1 Moving bolster exit - front/back Moving bolster height - 700 mm Continuous speed (variable) - 12-22 SPM Main motor with inverter - 160 kw Machine dimensions - Max. height from floor level - 8800 mm Clearance between uprights (L-R) - 4050 mm Clearance between uprights (F-B) - 2265 mm Max. press weight - 270 Ton

215

ID	MA38440
Make	Raskin
Model	70-30-E-2
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 700Ton Dimensions : 3150mm X 1800mm Ram : 400mm Ram Adjustment : 200mm Day Light SDAU : 750mm SPM : 12-30 Bed : 3150mm x 1800mm Front Opening : 3200mm Side Opening : 1700 Weight : 105 Ton Approx

216

ID	MA38439
Make	Schuler
Model	ES4-600-3,35-0.6
YOM	1969
Condition	Good Condition
Photo	See Photo
Capacity : 600Ton Number of Connecting Rod : 4 Slide Stroke : 600mm Shut Height From Top of Bolster,SDAU : 1100mm Slide Adjustment : 400mm Slide Dimensions (L-RX F-B) : 3350mm x 2130mm Bolster Dimensions ( L-R X F-B) : 3350mm x 2130mm Number of Moving Bolsters : Front Back Continuous Speed : 10-20Spm Main Motor Power : 75KW Maximum Height From Floor Level : 8000mm Clearance Between Uprights(L-R) : 3700mm Clearance Between Uprights (F-B) : 2200mm Maximum Press Weight : 200Ton Approx.

217

ID	MA38438
Make	Schuler
Model	EB4-800-3,0-700
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 800Ton Number Of Connecting Rod : 4 Slide Stroke : 700mm Shut Height From Top Of Bolster SDAU : 1200mm Slide Adjustment : 400mm Slide Dimenstions : 3100mm X 1900mm Bolster Dimensions : 3100mm X 1900mm Bolster Height : 300mm Continuous Speed : 8-22SPM Main Motor Power : 132kW Clearance Between Uprights(L-R) : 3400mm Clearance Between Uprights (F-B) :

218

ID	MA38437
Make	Weingarten
Model	VK1000.46.90
YOM
Condition	Good Condition
Photo	See Photo
Link drive kinematics - eccentric Capacity - 1000 Ton Number of connecting rods - 4 Slide stroke - 900 mm Shut height from top of bolster, SDAU - 1400 mm Slide adjustment - 250 mm Slide area - 4600x2200 mm Bolster area - 4600x2200 mm Side moving bolster height - 550 mm Continuous speed (variable) - 8-20 SPM Set up speed - 3 SPM Cushion in bed - No Front opening - 4800 mm Slide window - 2600 mm Same model 5 press available for sale

219

ID	MA38436
Make	Mecfond
Model	S4-1500
YOM	1984
Condition	Good Condition
Photo	See Photo
Single Action Drive kinematics - eccentric Capacity - 1500 Ton Capacity rating distance from BDC - 12.7 mm Number of connecting rods - 4 Slide stroke - 500 mm Shut height from top of bolster, SDAU - 1300 mm Slide adjustment - 200 mm Bolster area - 5000x2700 mm Number of moving bolster - 2 Moving bolster exit - front/T-track Moving bolster height - 400 mm Continuous speed (variable) - 12-30 SPM Main Motor - 400 HP Machine Dimensions - Max. height from floor level - 8200 mm Clearance between uprights - 5000 mm Clearance between uprights - 3200 mm Max. Press weight - 450 ton

220

ID	MA38435
Make	Mecfond
Model	S4-600-3950x2300
YOM	2024
Condition	Good Condition
Photo	See Photo
Single Action Capacity - 600 Ton Capacity rating distance from BDC - 12.7 mm Connecting rods - 4 Slide Stroke - 600 mm Shut Height from top bolster - 1500 mm Slide Adjustment - 600 mm Slide area - 3950x2300 mm Bolster area - 3950x2300 mm Number of moving bolster - 1 Moving Bolster Exit - Front/Back Moving Bolster Height - 500 mm Continuous Speed (Variable) - 10-22 SPM Mai motor with Inverter - 75kw Machine Dimensions - Max. Height from floor level - 8100 mm Clearance Between Uprights (LxR) - 4000 mm Clearance Between Uprights (FxB) - 1800 mm Max. press weight - 180 ton

221

ID	MA38434
Make	Minster
Model	E2-600-84-54
YOM	2013
Condition	Good Condition
Photo	See Photo
Capacity: 600-Ton Stroke: 8� (203mm) Shut Height (SDAU): 35.83� (910mm) Slide Adjustment: 10" (254mm) Speed: 30 � 70 SPM Bolster Area: 84" x 54" (2134mm x 1372mm) Window Openings: 53" (1346mm) with Coil Feed Line 5.4" (140mm) Bolster Plate EQUIPPED WITH: Air Clutch & Brake Hydraulic Overload Protection Air Counterbalances w/ Auto Adjustment Automatic Slide Adjustement Micro Inch Sugiyama Bottom Displacement Sensing Device Tamer Sound Enclosure (4) Vibro-Dynamics Isolator Mounts Safety Light Curtains Minster Monitor Flow Automatic Lubrication System Dual Palm Button Operation

222

ID	MA38428
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) Make - HIM YOM -2004/11 Capacity -1200 Ton Press -Link No of Stroke -20 SPM -14 SPM Slide Area -3500 mm - 2300 mm Slide Stroke Length -700 mm Slide Adjust - 600 mm Bolster Area -3500mm -2300 mm Up Light Side open -3750 mm 2800 mm Bolster Thickness - 280 Bolster - L-R Side Bolster type - D/V MOV, G Bolster Air -(in /out) -3 in / out Die height - 1000 mm Die height - Max. 1300 mm Min - 700 D Cushion -200 mm D/Cushion Stroke -300 ton Cushion PAD Area -Max- 2700 Min -1800 Air - 6 Kgf/cm Square Main Motor -135 x 4(DC) Kw x p Slide Adjust Motor -11 x 6 kw x p Scrap Size (max) -800 mm Scrap --FR /RR Crane -15/3 Ton 2)Make - HIM YOM -2004/11 Capacity -600 Ton Press -Link No of Stroke -20 SPM -14 SPM Slide Area -3500 mm - 2300 mm Slide Stroke Length -700 mm Slide Adjust - 600 mm Bolster Area -3500mm -2300 mm Up Light Side open -3880 mm 2800 mm Bolster Thickness - 250 Bolster - L-R Side Bolster type - D/V MOV, G Bolster Air -(in /out) -3 in / out Die height - 1000 mm Die height - Max. 1200 mm Min - 700 Air - 6 Kgf/cm Square Main Motor -90x x 4(DC) Kw x p Slide Adjust Motor -11 x 6 kw x p Scrap Size (max) -800 mm Scrap --FR /RR 3)Make - FUKUI YOM -1986/07 Capacity -600 Ton Press -Link No of Stroke -18 SPM -13 SPM Slide Area -3200 mm - 2000 mm Slide Stroke Length -800 mm Slide Adjust - 600 mm Bolster Area -3200mm -2000 mm Up Light Side open -3560 mm 2300 mm Bolster Thickness - 240 Bolster - L-R Side Bolster type - D/V MOV, G Bolster Air -(in /out) -3 in / out Die height - 1000 mm Die height - Max. 1100 mm Min - 600 Air - 6 Kgf/cm Square Main Motor -90 x6 (DC) Kw x p Slide Adjust Motor -7.5 x 6 kw x p Scrap Size (max) -800 mm Scrap --FR /RR 4)3)Make - FUKUI YOM -1986/07 Capacity -500 Ton Press -Electric No of Stroke -18 SPM -13 SPM Slide Area -3200 mm - 2000 mm Slide Stroke Length -800 mm Slide Adjust - 600 mm Bolster Area -3200mm -2000 mm Up Light Side open -3560 mm 2300 mm Bolster Thickness - 240 Bolster - L-R Side Bolster type - D/V MOV, G Bolster Air -(in /out) -3 in / out Die height - 1000 mm Die height - Max. 1100 mm Min - 600 Air - 6 Kgf/cm Square Main Motor -90 x4 (DC) Kw x p Slide Adjust Motor -7.5 x 6 kw x p Scrap Size (max) -800 mm Scrap --FR /RR

223

ID	MA38420
Make	Hitachi,Zosen
Model	S4-800-450-220
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity -800 Ton Slide Stroke -800 mm Stroke Per Minute -10-20 SPM Die Height -1400 mm Slide Adjust -600mm Bolster /Slide Area -4500 X 2200 mm {4500 X 2480}After Division MB Type -Left -Right Die Cushion -Not Equipped Micro inching -Recheck Side Moving -Two table (Left -Right )Cushion Nothinfg

224

ID	MA38419
Make	Hitachi
Model	--
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1)Model -S4-1600-450-220 YOM - 1985 Type -Crank Capacity -1600 Ton Slide Stroke -850 mm Stroke Per Minute -16 SPM Die Height -1400 mm Slide Adjust -500mm Bolster /Slide Area -4500 X 2200 mm MB Type -Left -Right Die Cushion -Not Equipped Micro inching -Recheck Side Moving -Two table (Left -Right )Cushion Nothing 2)Model -S4-1000-450-220 YOM -1995 Type - Crankless Capacity -1000 Ton Slide Stroke -800 mm Stroke Per Minute -10-20 SPM Die Height -1400 mm Slide Adjust -600mm Bolster /Slide Area -4500 X 2200 mm {4500 X 2480}After Division MB Type -Left -Right Die Cushion -Not Equipped Micro inching -Recheck Side Moving -Two table (Left -Right )Cushion Nothing 3)Model -S4-1000-450-220 YOM -1995 Type - Crankless Capacity -1000 Ton Slide Stroke -800 mm Stroke Per Minute -10-20 SPM Die Height -1400 mm Slide Adjust -500mm Bolster /Slide Area -4500 X 2500 mm MB Type -Left -Right Die Cushion -Not Equipped Micro inching -Recheck Side Moving -Two table (Left -Right )Cushion Nothing 4)Model -S4-800-450-220 YOM -1995 Type - Crankless Capacity -800 Ton Slide Stroke -800 mm Stroke Per Minute -10-20 SPM Die Height -1400 mm Slide Adjust -600mm Bolster /Slide Area -4500 X 2200 mm {4500 X 2480}After Division Side Moving -Two table (Left -Right )Cushion Nothing 1600 Ton Cushiion OK , Side Moving -One Table

225

ID	MI10792
Make	SIMPAC
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -1600 Ton Stroke -20 mm - 12 mm Area -3600 mm - 2300 mm Stroke Length -800 mm die Adjust -700 mm Diameter Area -3600mm -2300 mm height Side open -4100 mm 2750 mm Bolster Thickness - 300 bolster -L-R Side bolster type -D/V MOV, G bolster Air -(in /out) -3 in / out die height - 1000 mm cushion Stroke -300 ton Cushion PAD Area -Max- 3030 Min -1910 Crane -15/3 Ton

226

ID	MI10790
Make	Russian
Model
YOM
Condition	everything complete,in good condition
Photo	See Photo
SHUT HEIGHT 18.75 INCHES BED AREA 48 INCHES X 36 INCHES CAPACITY 100 TON STROKE 3 INCHES WEIGHT OF THE MACINE CA. 28000 LBS DIMENSION OF THE MACHINE CA. L: 2500MMx W:1425MM x H:3700MM

227

ID	MA38413
Make	Mecfond
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 200 Ton Travel: 200 mm Space from over the top and base top: 550 mm Speed travel: from 15 to 80 rpm/min Dimension of base: 1500x1350 mm

228

ID	MA38412
Make	Hanoul
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 160 Ton Slide stroke - 200 mm Number of stroke - 40(SPM) Die Height - 450 mm Slide area - 1000x700 mm Bolster area - 1230x780 mm Main motor - 15x4 mm

229

ID	MA38411
Make	JEIL
Model
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Slide stroke - 150 mm Slide stroke adjustment - 120 mm Stroke per minute - 40-55(SPM) Slide area - 2100x700 mm Bolster area - 2700x920 mm Main motor - VS 22x4 kw Cushion Capacity - 28 ton Cushion stroke - 110 mm Cushion pad area - 1440x580 mm

230

ID	MA38409
Make	Shinohara
Model	PGA-30
YOM	1991/1992
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Slide stroke - 600 mm Slide stroke per minute - 13-54(SPM) Die Height - 800 mm Slide adjustment - 300 mm Slide area - 2000x1200 mm Bolster area - 1900x1200 mm Main motor - 30 kw Same model 2 machines available for sale

231

ID	MA38405
Make	Bright World China
Model	JW36-500
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Slide stroke - 350 mm Slide stroke per minute - 20(SPM) Die Height - 750 mm Slide adjustment - 120 mm Slide area - 1250x2700 mm Bolster area - 1650x2800 mm Main motor - 55kw

232

ID	MA38404
Make	Shimomura
Model	TFC-500-32E
YOM	1997
Condition	Good Condition
Photo	See Photo
Capacity - 500 ton Slide stroke - 1000 mm Slide stroke per minute - 12-25 (SPM) Die Height - 800 mm Slide Adjustment - 300 mm Slide Area - 1250x3200 mm Bolster Area - 1000x3200 mm Main Motor - 45kw

233

ID	MA38403
Make	SIMPAC
Model	DAH-300
YOM	2005/12
Condition	Good Condition
Photo	See Photo
CAPACITY:300 TON STROKE LENGTH :200 STROKE PER MINUTE:30-60 DIA HEIGHT: 650mm SLIDE ADJUST:200mm SLIDE DIMENSION :2000 x1200mm BOLSTER DIMENSION 2000x 1200mm BOSTER STICKNESS :200mm MAIN MOTOR:55 x 41V KWR ADJUST MOTOR : 22 x 6 KWR OPENING SIZE :1200x950mm WORKING HIEGHT: 75mm MAIN VOLTAGE :380V CONTROLE VOLTAGE : 110V

234

ID	MI10759
Make	World
Model	JH2-25
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 25 Ton

235

ID	MI10758
Make	Wasino,Japan
Model	PUX75L
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 75 Ton Stroke - 150 mm Die height - 330 mm Number of strokes - 60 s.p.m Adjustement amount - 75 mm Table size - 540x400 mm Bolster area - 900x500 mm Main motor - 5.5 kw

236

ID	MI10757
Make	Nagao
Model	NCP-750
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 75 ton Stroke - 150 mm Stroke per minute - 60 mm Die Height - 330 mm Adjustement of slide - 75 mm Bed area - 900x500 mm Main motor - 5.5 kw

237

ID	MA38379
Make	SSANGYONG
Model	DE2P-800
YOM	2001
Condition	Good Condition
Photo	See Photo \| See Video
Capacity:800 Tons Stroke Length :600 mm Stroke Per Minute Spm: 14-20 Die Height:1200 mm Slide Adjust:600 mm Slide Area (LR FB):2800 mm1600mm Bolster Area(LRFB):2800 mm1600 mm Main Motor KWP:DC104P Adjust Motor KWP:7.56 Die Cushion Capacity:140 Ton Stroke:0-250mm Pad Area LRFB:20501250 mm Die Cushion Motor KWxP:2.2*6

238

ID	MI10756
Make	Rhodes,U.K
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 150 Ton Table size - 800x600 mm Die height - 600 mm

239

ID	MI10755
Make	ISGEC
Model	GZ110
YOM	2017
Condition	Good Condition
Photo	See Photo
Capacity - 110 ton Stroke - 180 mm Stroke per minute - 45 s.p.m Shut height - 350 mm Throat - 355 mm Slide face - 625x500 mm Slide adjustement - 80 mm Bolster area - 1150x710 mm Installed Power - 11 kw

240

ID	MI10754
Make	ISGEC
Model	GZ110
YOM	2013
Condition	Good Condition
Photo	See Photo
Capacity - 110 ton Stroke - 180 mm Stroke per minute - 45 s.p.m Shut height - 350 mm Throat - 355 mm Slide face - 625x500 mm Slide adjustement - 80 mm Bolster area - 1150x710 mm Installed Power - 11 kw

241

ID	MI10753
Make	Seyi,Japan
Model	SN2-110
YOM	2010
Condition	Good Condition
Photo	See Photo
Capacity - 110 ton Stroke - 180 mm Strokes per minute - 35-65 mm Die Height - 400 mm Slide adjustement - 90 mm Slide area - 1430x520 mm Bolster area - 1880x680 mm Main motor - 15 HP

242

ID	MI10752
Make	AIDA
Model	NC2-1600(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 160 Ton Slide stroke - 200 mm Stroke per minute - 30-55 s.p.m Die Height - 450 mm Slide adjustement - 100 mm Slide area - 1500x580 mm Bolster area - 2040x760 mm Main motor - 15 kw

243

ID	MI10751
Make	AIDA
Model	NC2-160
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 160 ton Slide stroke - 200 mm Strokes per minute - 30-55 s.p.m Die height - 450 mm Slide adjustement - 100 mm Slide are - 1500x580 mm Bolster are - 2040x760 mm Main motor - 15 kw

244

ID	MA38378
Make	SSANGYONG
Model	DA-400 D-25
YOM	2001
Condition	Good Condition
Photo	See Photo
Capacity: 400 Tons Stroke Length :400 mm Stroke Per Minute (spm):14-24 spm Die Height :800/1000 mm Slide Adjust:200 mm Slide Area (LRFB) :25001600 mm Bolster Area (LR* FB):25001600 mm Main Motor :DC454 KWxp Adjust Motor :3.76 Die Cushion Capacity :Ton 302 Stroke: 200 mm Pad Area (LRFB):2500 mm1090 mm Die Cushion Motor: KWp:2.24

245

ID	MI10749
Make	Sanes,Taiwan
Model	EHW-250
YOM	2004
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton Stroke Length - 200 mm Stroke per minute - 35-65 s.p.m Die height - 500 mm Slide adjustement - 50 mm Slide area - 2200x800 mm Bolster area - 2200x900 mm Main motor - 40 HP

246

ID	MI10748
Make	Sanes,Taiwan
Model	EHW-300
YOM	2002
Condition	Good Condition
Photo	See Photo
Capacity - 300 ton Stroke Length - 200 mm Stroke per minute - 25-65 mm Die Height - 500 mm Slide area - 2200x800 mm Bolster area - 2200x900 mm Main motor - 40HP

247

ID	MI10740
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL FORCE 160 TON TABLE SIZE 900 X 1200 MM TABLE HEIGHT ADJUSTMENT 125 MM TOP DEAD CENTER HEIGHT 500 MM TABLE HEIGHT ADJUSTMENT 125 MM STROKE 20-200 MM WEIGHT OF THE MACHINE CA. 18 TON DIMENSION OF THE MACHINE CA. 1200MM X 1800MM X 3200MM

248

ID	MI10739
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY 250 TON DIMENSION TABLE (X - Y) 1.100 x 850 MM TOP DEAD CENTER HEIGHT 500 MM TABLE HEIGHT ADJUSTMENT 125 MM STROKE 20-200 MM WEIGHT OF THE MACHINE CA. 16000KG DIMENSION OF THE MACHINE CA. 1200MM X 1800MM X 3200MM

249

ID	MI10738
Make	Indian
Model
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL PRESS FORCE 100 TONS ADJUSTABLE STROKE RATES UP TO 50 MM TABLE SIZE 400 X 500 MM OPENING 350 MM STROKE 32 MM PER MINUTE HEIGHT 380 MM RAM ADJUSTMENT 56 MM DRIVE POWER 5.5 KW POWER TO 7.0 KW POWER MAXIMAL WIDTH OF STRIP 900 MM MAXIMAL THICKNESS OF STRIP 1,6 MM WEIGHT 3400

250

ID	MI10737
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL FORCE 250 TON STROKE ADJUSTMENT 40 - 160 mm RAM ADJUSTMENT 110MM RAM DIMENSION 900MM X 670MM POWER 23.5KW DIMENSION OF THE MACHINE 1,5 x 2,9 x 3,6 m WEIGHT APPROX. 16000KG

251

ID	MI10736
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL FORCE 250 TON STROKE ADJUSTMENT 165 SLIDE ADJUSTMENT 70 HOLE IN RAM 63 HOLE IN BED 229 Length & wide of Bed 1067X778 WEIGHT APPROX. 16000KG

252

ID	MI10735
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL FORCE 250 TON STROKE ADJUSTMENT 165 SLIDE ADJUSTMENT 70 HOLE IN RAM 63 HOLE IN BED 229 Length & wide of Bed 1067X778 WEIGHT APPROX. 16000KG

253

ID	MA38373
Make	ROVETTA
Model
YOM
Condition	Good Condition
Photo	See Photo
Normal Pressure 250 ton Adjustable Stroke 300 mm Slide Adjustment 203 mm Strokes Per Minute 10-20 n� Distance Between Uprights 1.580 mm Dimensions Of Bolster 1.520 x 1.220 mm Dimensions Of Slide 1.520 x 1.220 mm Openings In The Bed 1.130 x 830 mm Thickness Of Bolster 150 mm Openings Per K.O. Bars 3 n� Openings In The Uprights 700 x 500 mm Adjustment Of The Motor Slide 25 KW Cushions 1 n� Total Cushions Capacity 600 KN Dimensions Of Single Pressure Pad 1.100 x 800 mm Cushion stroke 15-150 mm Table Size 1.500 x 1.220 mm Main Motor Power 37 kW MACHINE WITH Qty.1 CUSHION

254

ID	MA38359
Make	Erfurt
Model	PKZZIV500
YOM	1988
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Runner stroke rate, per minute-1 : 20 Maximum distance between table and ram - 1100 mm Runner adjustment - 500 mm Table dimensions - 2800 x 1500 mm Runner dimensions - 2800 x 1500 mm Cushion power in table - 100 Ton Table cushion stroke - 200 mm Motor power - 75 kw Moving Bolster Press weight - 136000 kg

255

ID	MI10652
Make	Erfurt
Model	PKZE1250
YOM	1987
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 1250 Ton Stroke of the slide - 500 mm Adjustability of slide - 215 mm Stand Width ( Nominal Mass) - 1630 mm Table Area (LR x FB) - 1600 x 1800 mm Slide Area - 1300 x 1400 mm Opening in table - 1100 x 1100 mm

256

ID	MA38291
Make	Komatsu
Model
YOM	1972
Condition	Good Condition
Photo	See Photo
Max. Pressure - 2000 Ton Bed Boolster LR/FB - 360' x 65' Slide Stroke 20 ' die Height - 40' Slide Adjustment - 10' Slide Stroke Speed - Continue - 10 SPM Speed Intermitted - Committed - 7 Spm Between Colomn -244' MAX . Weight Upper Die -20 Ton Die cushion Max . Capacity - 60 Ton EA Air Pressure -90 PSI Main Motor Power -150 HP Total Power Requirment - 185 KVA Appr . Weight =515 Ton With Equipment New Clutch Installed 2 Slide Moving Bolster LR -FB -360' x 65' Slide Stroke 20 ' Die Cushion - pneumatic - 6-pad LR-FB 35.5" x 35.5" - 6 cylinder incl locking device - working strike 8" Micro Inching - stroke 1 spm - capacity 1/8" - electric motor 75 HP

257

ID	MA38222
Make	Komatsu
Model	OBS80
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity - 80 Ton Number of Stroke - 60 Stroke Length - 130 mm Die Height - 350 mm Slide Adjustement - 80 mm Slide Dimensions - 500 x 400 mm Bolster Dimensions - 900 x 600 x 80 mm

258

ID	MA38212
Make	TMP Voronezh Russian
Model	K4039
YOM	1978
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 800 Ton Slide Stroke -800 Ton Press Tonage -800 Ton Slide Stroke -800 mm Slide Adjustment -(500 mm) Min. Die-Height (900 mm) Max. Die-Height -(1,400 mm) Min. Die-Height -900 mm Slide(Ram) Size -2,050 x 4,200 mm Bolster Size -2,100 x 4,200 mm Slide Balance Capacity - Windows Size (W x H) - Bolster Height - 250 mm Carriage Thickness -370 mm Bolster Moving Type -Front Moving Speed (Max/Min) -15 SPM Cushion Die - Type -(1) Pad, (2) Cylinders Tonnage -200 Ton Stroke -250 mm Adjust Size - Cushion - Stroke Adjust Pad Size Q.D.C Automation Loader Unloader Main Motor Power -132 kw Hydraulic Overload Air Pressure Electrical Power Source Main Power 132 kw Die-Cushions

259

ID	MI10579
Make	Komatsu
Model	E2G800-3BM
YOM	2000
Condition	Good Condition
Photo	See Photo
Pressure capacity - 8000 KN number of strokes min-1 stroke length -600mm Die height (from the top of the bolster to the bottom of the slide) -1100mm Slide adjustment amount - 400mm Slide dimensions (left and right x front and rear) -2500X9500mm Bolster dimensions (left and right x front and rear x thickness) 2500 x 15.5.0 x 230mm Sudden stop time -505ms Setting position of overrun monitoring device -95 Allowable mold quality -6000kg Position of ability generatioN 10 MM Number of strokes (continuous) -1123 Les me� (spm) Maximum number of working strokes (intermittent) -10 les me� {spm) Dimension between uprights (effective ) -2850 (2500) MM Side opening (enabled) - 1800 (1550)mm balancer ability 80 (8.0) kN (tonf Main motor (variable speed) -VS 75 kW kJ {tonf-m) -Allowable workload During intermittent operation -215.0/10spm {22.0/10spm) kJ {tonf.m) During continuous operation -49.0/11-23spm 215.0/10spm {22.0/10spm) (5.0/11-23spm) Above the floor ~ Bolster top height 650 MM Customer factory air pressure [pressure increase] -0.49 [0.83] (5 [8.5])MPa {kgf/cm�)

260

ID	MA38205
Make	Komatsu
Model	OBS45
YOM	1976
Condition	Good Condition
Photo	See Photo
Capacity - 45 Ton Stroke Length - 100 mm Die Height - 250 mm Adjustement Dimensions - 60 mm Number of stroke - 80 RPM Bolster Dimensions - 700 x 450 x 65 mm Slide Dimensions - 400 x 300 mm

261

ID	MA38203
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 200 Ton Stroke Length - 150 mm Stroke per minute - 40 spm Bolster Horizontal - 745 x 800 mm Slide - 850 x 630 mm Distance Between slide bolsters - 470 mm

262

ID	MI10576
Make	Schuler
Model
YOM	Reconditioned in 2017
Condition	Good Condition
Photo	See Photo
Capacity -800 Ton Bolster size : 3150mm x 1950mm Slide area : 3100mm x 1900mm Stroke length : 900mm Die height : 1200mm ) Adjustment : 400 mm Die cushion : 160 ton Cushion stroke : 250 mm SPM : 16 Complete with all electricals .

263

ID	MI10574
Make	Amada
Model	TP-150B-X
YOM	1982
Condition	Good Condition
Photo	See Photo
pressure capacity -150 number of strokes -40 S.P.M. Stroke length -225mm die height-430mm Slide adjustment amount100mm Sudden stop time -192 ms maximum stop time 212 ms 4 power supply Overrun monitoring device/setting position -15 Every time -200 V3 phase -50Hz motor -11KW Mechanical weight -16.6 HIM AMADA Co., Ltd.

264

ID	MA38175
Make	WMW Erfurt,Germany
Model	PKZV 800/4000 FS
YOM
Condition	Good Condition
Photo	See Photo
The greatest force of the slider at - 8000 KN Distance to bottom dead center-12,5 mm Slider force -2500 KN at distance to bottom dead center -200 mm Idling number -14 min-1 Slider stroke -600 mm Min. closed height -700 mm Max. closed height - 1200 mm Pillow in the table: Move max. -250 mm Adjustable stroke =250 mm Holding force -1600 KN Usklke ejection -1600 KN Max. force of slide: 800 tons Stroke of slide: 500 mm Adjustability of slide: 500 mm Max. daylight between bolster and slide (SDAU): 1200 mm Width between columns: 4000 mm Slide area (WxD): 4000x2500 mm Bed area (WxD): 4000x2500 mm Opening in bed (WxD): 3520x1520 mm Moving table height: 630 mm Main motor power: 90 kW Idle stroke rate per 1 min: 14 Counterpressure of cushion in bed: 160 tons Stroke of cushion plate: 200 mm Height above ground: 8400 mm Press weight: 210000 kg Double crank sheet metal stamping press is intended for cold forming of sheet specified for drawing, bending and cutting parts, for instance: coverings, door, parts of the car body and so on. The press is equipped with front moving bolster.

265

ID	MA38162
Make	Clearing
Model	K-2500-96
YOM
Condition	Good Condition
Photo	See Photo
TONNAGE : 500 STROKE : 18" SHUT HEIGHT : 53" ADJUSTMENT : 8" STROKES PER MINUTE : 18 BOLSTER THICKESS : 7 BED SIZE : 96" X L-R X 72" F-B RAM SIZE : 96" X L-R X 72" F-B WINDOW SIZE : 24" X 25" MOTOR HP : 40 HP MOTOR RPM : 1130

266

ID	MA38139
Make	Arisa
Model	SE1-250-130-115D
YOM
Condition	Good Condition
Photo	See Photo
Capacity -250 Ton Table- 1350 x 1170 mm 20 golpes min Stroke -400 mm Closing height -600 mm

267

ID	MA38138
Make	ESNA
Model
YOM
Condition	Good Condition
Photo	See Photo
capacity -125 Ton TABLE 1235 X 715 MM

268

ID	MA38137
Make	GOITI
Model
YOM
Condition	Good Condition
Photo	See Photo
Table 1270X765 mm Capacity -200 TN MECHANICAL PRESS stroke -40 min

269

ID	MA38124
Make	Komatsu
Model	E4S800
YOM
Condition	Good Condition
Photo	See Photo
Max tonnage : 800Ton Stroke : 600 Adjust 550 Max. Shut height : 1350 Speed: max 20 spm Slide : 3000 x 2000 Bolster : 3000 x 2000 , Thickness 270 Die-cushion : 150T Stroke: 300mm

270

ID	MA38123
Make	Komatsu
Model	E4S1000-MB
YOM	1986
Condition	Good Condition
Photo	See Photo
Ton 800 Table - x mm 2900 Slide - stroke mm 475 Table - width (mm) 2900 Number of strokes minute 14 -22 Frame H/C C FRAME Inspection 2000 Activation system :ECCENTRIC Table - y (mm) 2300 Conditions WORKING Extractable table LATERAL Number of strokes min 14 22 Slide - y mm 2300 Slide - x mm 2900 Slide - registration (mm) 100 Piston rods 4 Slide - adjustament system GUIDED Slide - number of guides 8 Tdc span mm1545 Die cushion - total strength (ton) 80 Die cushion - motion (hydraulic pneumatic hydropneumatic PNEUMATIC Die cushion - number of cushions 1 Subtype DM CDC) DOUBLE UPRIGHT Revision 2000 Drive system eccentric link motion knucle joint hydraulic screw fly ECCENTRIC Table - depth (mm) 2300 Lateral window (mm) 2900 Removable table front / side / T-track LATERAL Die cushion - stroke mm 150 External dimensions - X mm 5000 External dimensions - Y mm 3500 External dimensions - height mm 7000 Electrical components - number of motors 3 Electrical panel conditions working missing complete inspection inspection required WORKING Motor power (kW) 85 Safety protections FRONTAL AND POSTERIOR Light barriers FRONTAL AND POSTERIOR Foundation (cm) 200 Weight ton 140 Slide - width mm 2900 Accessories other data IRON LINE 1200Z12 Slide - depth mm 2300 Hydraulic overload YES Slide - adjustable stroke (mm) 475 Push points 4 Sled - number of guides 8 Slide - adjustment system GUIDED Light pms (mm) 1545 Side window between the uprights (mm) 2900 Blank holder cushion - total force (ton) 80 Blank holder cushion - number of cushions 1 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) TIRE Blank holder cushion - stroke (mm) 150 External dimensions - width (mm) 5000 External dimensions - height above ground mm 7000 External dimensions - depth (mm) 3500 Electrical components - No. of motors 3 Motor power (kw) 85 Conections electrical panel working, missing, overhauled, to be overhauled WORKING Photocells front rear FRONT AND REAR Safety protections front rear FRONT AND REAR

271

ID	MA38122
Make	Komatsu
Model	E5T1000
YOM	1989
Condition	Good Condition
Photo	See Photo
S:500 12〜25spm DH:900 Adj:100 SL:53002050(有効1800) B:53751800*230 With DC Accessories ①Electric 3D transfer Feed stroke：0-780㎜ Ckamp stroke：0-200㎜ Lift stroke：0-80㎜ Stroke count：8＆12-22spm ② leveller feeder Manufacturer：Sonorika Model：UC12140 Coil weight：MAX5000kg Coil outer diameter：MAX1200㎜ Coil inner diameter：508㎜ Feed per stroke：1150㎜ Plate thickness：2.3㎜ Plate width：MAX1400㎜ Plate thickness�Plate width：1.0�1400㎜、2.3�400㎜ Feed speed：29m/min Air pressure Motor capacity：3.7kw�200V Accessories Air vibration isolator Electric servo type 3D transfer leveller feeder

272

ID	MA38121
Make	Verson
Model	S4-1000-120-72T
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity: 1000 Tons Bed: 120� x 72� Stroke: 24� Shut Height: 87� SDAU Bolster Thickness: 10" Carriage Thickness: 17" Adjustment: 14� Speed: 13 - 26 SPM WEIGHT Approx -359,100

273

ID	MA38117
Make	Schuler
Model
YOM	1974
Condition	Dismantled,Good condition
Photo	See Photo
Distance between uprights: 3700 mm Table surface: 3350x2134 nn Punch stroke: 762 mm Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm Lubrication equipment: 0.75kw 1500 rpm Pump motor power: 1.1 kw 3000rpm Voltage: 220V, 50 hz Pneumatic installation: Surface area: 1420x990 mm Piston diameter: 800 mm Stroke of plunger 305 mmm Total power: 180Mp Approx. Onsite Dimension. ( l x w x h ) 4,000 x 6,000 x 12,000 mm Weight approx. 380,000 kg

274

ID	MA38115
Make	Komatsu
Model
YOM	1972
Condition	Good Condition
Photo	See Photo
Max. Pressure -2000 Bed /Blosters LR /FB -320 " x 65" Slide Stroke -20 " Die Height - 40" Slide Adjusted -10" Slide Stroke Speed -Continuous -10 SPM Speed Intermitted /working -7 SPM

275

ID	MI10511
Make	Pels
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 Ton Bed Size - 1500x1350

276

ID	MI10506
Make	Wilkins & Mitchell
Model
YOM
Condition
Photo	See Photo
Capacity - 400 tons Crankless 4 point power press complete with all electrical and die cushions. Bed size 2700x1500 Stroke 400mm Shut height 800mm plus

277

ID	MA38094
Make	Komatsu
Model	E2M300
YOM	1986
Condition	Good Condition
Photo	See Photo
Main specifications Pressure capacity -300 ton Number of strokes - 30-80 spm Stroke length -200 mm Die height (from the top of the bolster to the bottom of the slide) -50mm Slide adjustment amount-100 mm Slide dimensions (left and right x front and back) -1850x90 mm Bolster dimensions (left and right x front and back x thickness)-1850�1100�250mm Emergency Stop time setting - 20 ms Setting position of overrun monitoring device-15 degrees

278

ID	MI10493
Make	Komatsu
Model	OBW200-2
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity 200 ton Stroke 300 (spm 20-40) Die Hight 475 mm. Slide Adjustment 120 mm. Slide Area 1850 x 850 mm Serial No. 10199 Bolster Area 2400 x 850 x160 mm

279

ID	MA38083
Make	Bliss
Model	SE-120-60
YOM
Condition	Good Condition
Photo	See Photo
SPECIFICATIONS Capacity :800 Tons Bed Area: 120"*60" Stroke:14" Shut Height :30"Sdau Over Bolster Adjustment :18" SPM :14-28 Variable Windows :32 " Equipped With Air Clutch And Brake AIr Counter Balances 10 Hp Main Motor 9"T Slotted Bolster Main Motor -100 HP 0-1750 rpm Cushion Details -177.8 mm Stroke - 79.5 tons Air Pressure- -@100psi . PLC or contractologic -No hydraulic nuts. Connecting Rod -2 pt connection Wintriss Smart Pac

280

ID	MA38067
Make	Seyi,Taiwan
Model	SN1-160
YOM	2013 AND 2014
Condition	Good Condition
Photo	See Photo
Capacity : 160 Stroke : 200mm Strokes/mm : 30/50spm Die Height : 400mm Slide Adjustment : 100mm Slide Area : 720x580mm Bolster Area : 1250x760mm Qty : 5Nos

281

ID	MA38066
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : Amada Capacity : 150TON Make : Komatsu Capacity : 110TON Make : Amada Capacity : 60Ton

282

ID	MA38058
Make	Komatsu Japan
Model	OBS150-2
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 150 Ton Number of slide strokes : 40spm Slide stroke : 200mm Die Height : 450mm Slide adjustment : 100mm Slide dimensions : 700x550mm QTY - 2Nos

283

ID	MA38057
Make	AOTO
Model	AC1-15N
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150Ton Number of Stroke : 45 Stroke Lenght : 200mm Die Hieght : 450mm Slide Adjustment Lenght : 100mm Slide Dimentions(Left and Right x Front and Back) : 700 x 500mm Bolster Dimension : 1250 x 700mm Rapid Stop Time : 137ms Maximum Stop Time (TI + TS) : Two Handed Operation + Ray Typ Overrun Detection Position : 15 Degree Main Electric Motor : 11kW 6P Slide Adjusting Electric Motor : 0.4kw 4P Used Power Supply : 200V Three Phase 60Hz Air Pressure Used : 5kgf/cm2

284

ID	MI10458
Make	Ludhiana
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton

285

ID	MI10457
Make	England
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 150 Ton

286

ID	MA38050
Make	Amada
Model	TP110C
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity - 110 Ton specification S:150 spm:40-60 DH:320 ( to confirm) Adj:100 SL:600500 BL:1100700

287

ID	MA38039
Make	Hyundai
Model	TF2-1000-550x150
YOM	2000
Condition	Good Condition
Photo	See Photo
Capacity: 1,000 TON Bolster: 5,500 x 1,500 mm

288

ID	MI10438
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -400 Ton Type pneumatic Clutch Bed Area -1100 X1100 MM Bed To Ram -660 mm Stroke Length -200 MM Slide Adjustment -80 MM Motor 40 HP RPM -1440 RPM

289

ID	MA38025
Make	TMP Voronezh Russian
Model	KB3537
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 500t Stroke -250mm SPM - 25 per min Table 2500x1400mm, Close height 750, Adjustment 200, Weight 59t

290

ID	MA38023
Make
Model	KB3537
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 500Ton SPM: 25 Table 2500x1400mm

291

ID	MI10428
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Bed Size - 38x36'' Piller - 11x30'' Plate - 35 mm Gear - 72 Wheel - 56'' Gap - 62'' Ram - 26x16'' Machine Dimensions Length - 33'' Height - 133'' Width - 58''

292

ID	MA38018
Make	Wasino,Japan
Model	PUX60
YOM	2018
Condition	Good Condition
Photo	See Photo
Capacity - 60 Ton Die Height - 300 mm Stroke Length - 63 mm Number of Stroke - 60 - 140 spm Adjustment amount - 50 mm Lower area (left and right X front and back) - 420X750 mm Bolster area (left and right x front and rear) - 500X850 mm Main Motor - 7.5 KW Same Model 6 Machines for sale

293

ID	MA38004
Make	Amada
Model	TP150
YOM	1983
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 150 ton Stroke length: 225 mm Die height: 430 mm Bolster area: 1250 x 750 mm Slide area: 700 x 550 mm

294

ID	MA37978
Make	Radaelli
Model	220
YOM
Condition	Good Condition
Photo	See Photo
Maximum Pressure 220 Ton Fixed Stroke 200 mm Maximum Distance Between Board And Slide 850 mm Table Size 1.550 x 1.200 mm Light Between The Posts 1.550 mm Strokes Per Minute/First 20 n� Possibility Of Adjusting The Sledgehammer 120 mm Power Of pneumatic binder 14 Ton Binder Stroke 140 mm Main Engine Power 20 HP Freshman 000/74 n� Same Model 2 Units for sale

295

ID	MA37954
Make	WMW Erfurt,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 500 ton Table size 2800 x 1500 mm Ram size 2800 x 1500 mm Ram stroke 500 mm Ram adjustment 500 mm Strokes per minute 20 Shut-height 1100 mm Distance between columns 2800 mm Weight ca. 85ton

296

ID	MI10380
Make	Shinohara
Model
YOM
Condition	Good Condition
Photo	See Photo
STROKE:350 MM STROKE PERMINT:22 DIE HEIGHT :550 MM ADJUSTMENT OF SLIDE :150 MM BED AREA :16001100 RAM SIZE:1400100 WITH DIE CUSHION

297

ID	MI10339
Make	Haulick
Model	HPV140
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 140 Ton Table Size:780mm x 600mm Stroke : 80mm Strokes Per Minute : 120 Ram Adjustment : 60mm Motor : 20hp

298

ID	MA37871
Make	AIDA,Japan
Model	NC2-16
YOM	1984
Condition	Good Condition
Photo	See Photo
Capacity - 160 Ton Stroke - 130 mm SPM - 40-85 Slide Area - 1500x580 mm Bolster area - 2040x600 mm Die Height - 350mm Slide Adjustment - 100 mm Main Motor - 15 kw Press with feeder Make - Orii Model - LCC03SATBX-DAS Year of Manufacture - 2005 Mechanical Mass - 1200 kg Boards are sold in 30 ~ 300 mm Plate Thickness - 0.3 ~ 2.3 mm Max Line Speed - 16m/Min Max Coil Mass 2000 kg Top Speed 0.762 m/sec

299

ID	MA37859
Make	Kobe,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Stroke - 400 mm SPM - 20 Die Height - 1000 mm Adjust - 400 mm Slide - 2150x1220 mm Bolster - 2150x1220 mm With Die Cushion

300

ID	MA37838
Make	Erfurt
Model	PKZ400
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Slide stroke - 315 mm Number of slide strokes - 8 stroke/min Number of strokes of of the slider at idle - 18 turn/min max. distance betn table and the slider - 1000 mm Adjust the distance betn the table and the slide - 200 mm Max. thickness of processing material - 21 mm Max. Surface of processing material -1000 mm flywheel shaft speed - 520 min Main drive power - 32 kw

301

ID	MI10292
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity -400 tons Bed Area -1100 x1100 mm Bed to ram -660 mm Strock Length -200 mm Slide Adjustment -80 mm motor -40 hp -1440 RPM

302

ID	MA37792
Make	AIDA
Model	C1-15
YOM	1988
Condition	Good Condition
Photo	See Photo
Poster area (left and right x tax included) 7220mm�600mm Slide area (left and right x) 700mm�580mm Die height (black) 350 mm Slide adjustment length 700 mm Stroke length 80 mm Strokes per minute 50~100 spm

303

ID	MA37776
Make	Komatsu
Model	L2M400-3BM
YOM	1998
Condition	Good Condition
Photo	See Photo
Tonnage: 440 Tons � Stroke: 7.9" � Die Height (SDAU): 27.6" � Shut Height (Bed to Slide, SDAU): 38.6" � Stroke Speeds: 30 - 80 SPM � Bed Area: 96.5" L-R x 49.2" F-B � Window Opening: 46.8" � Year: 1998

304

ID	MA37762
Make	AIDA
Model	C1-11(2)B
YOM	1982
Condition	Good Condition
Photo	See Photo
Capacity - 110 Ton with cushion Stroke length (mm) 180 Strokes per minute (spm) 35-65 Bolster area left and right x front and rear (mm) 1080�680 "Slide area left and right x front and back (mm) 600�520 Die height (stoke) (mm) 350 "Slide adjustment length (mm) 90 【Main motor (kw) 7.5 Used air pressure (kgf/cri) 5 emergency stop time (ms) 217 Maximum manual operation (ms) 222 Stop time Ray type (ms) 237 Overrun monitoring device setting position 12� �3�

305

ID	MA37748
Make	Komatsu
Model	OBW 250B
YOM	1982
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton pressure capacity 250 ton number of strokes 15-35 pm stroke length 300mm Die height (from the top of the holster to the bottom of the sleight) 550 mm Slide adjustment amount 120mm Slide dimensions (left and right x front and rear) 2100 x 700 mm emergency stop time 19.2 ms Setting position of overrun monitoring device 15 degrees

306

ID	MA37710
Make	Amada,Japan
Model	TP150
YOM	1979
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 150 number of strokes : 40 S.P.M. Stroke length :152.4 mm die height : 334.6mm Slide adjustment amount : 100 mm emergency stop time : 192 ms maximum stop time : 212 ms power supply : 200 V3 phase 60

307

ID	MI10211
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 250 Ton

308

ID	MA37701
Make	Komatsu
Model	OBS80-3
YOM	1987
Condition	Good Condition
Photo	See Photo
Maximum Capacity - 80 Ton air clutch press Number slide of strokes 60 slide stroke 180mm Die Height 400 mm Slide Adjustment 80 mm Slide Dimensions (LR x FB) 550 x 450 mm Bolster Dimensions (LR x FB x THICKNESS) 1000 x 500 x 140 mm

309

ID	MA37700
Make	Komatsu
Model	OBP150
YOM	1988
Condition	Good Condition
Photo	See Photo
Maximum Capacity -150 Ton air clutch power press. Year 1988 with uncoiled, leveller and NC feeder Number of Slide Strokes 68-136 spm slide stroke 110 mm Die Height (Bolster to slide sdau) 450mm Slide adjustment 100 mm Slide Dimensions (LR x FB) 1100 x 600mm Bolster Dimensions (LR x FB x Thickness) 1580 x 650 x 165

310

ID	MA37699
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -300 Ton air clutch power press with uncoiler, leveller and NC feeder. MAXIMUM CAPACITY. 308 NUMBER OF SIDE STROKES 10-100 SLIDE STROKE 150 DIE HEIGHT 450 SLIDE ADJUSTMENT 900 SURVEDIMENSIONS RYFB) BOLSTER BIMENSIONS RXFE XTRESS 1850819004300

311

ID	MA37692
Make	Seyi,Taiwan
Model	SN1-60
YOM	1995
Condition	Good Condition
Photo	See Photo
CAPACITY - 60 Ton STROKE 0130 STROKES/MIN 40-75 SLIDE AREA 480X400 BOLSTER AREA 1900X520 DIE HEIGHT 300 SLIDE ADJUST 170 AIR PRESSURE 172 MAIN MOTOR 310 X 4 HPXP POWER 380 V50 HZ5KVA BREAKE TIMING M.S.

312

ID	MA37691
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
pressure capacity - 60 Ton number of strokes Strokele Slide metering Main function Slide rope 450x350 Bolster dimension you 1206 55055- Including stop time Setting up the Oparan monitoring device 29-652 Maintenance standards clutch brake strop

313

ID	MA37690
Make	OKK
Model	MT-100
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 100 Ton Ability (Before going to the death table) 4 mm 100t ram stroke F1.70mm Ram stroke number 455/M Ram adjustment amount 85mm die height 36mm The area below the ラム 500�620mm bolster area, 620x1060mm electric motor 7.5KW 4 P clutch air pressure balance air pressure 5 K

314

ID	MA37689
Make	Amada
Model	TP110B
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity - 110 Ton emergency stop time 179 ms maximum stop time 199 ms Overrun monitoring device/setting position 15 degrees power supply 200 V3 phase 60 Hz motor 7.5 KW Mechanical weight 10 TON machine with cushion

315

ID	MI10200
Make	Amco
Model
YOM	2004
Condition	Good Condition
Photo	See Photo \| See Video
Nominal Force Stroke :- 400 Ton Shut Height Min and Max :- 700 and 980mm Slide Face :- 1500 x 2500mm Bolstar Face :- 1500 x 2440mm

316

ID	MI10196
Make	Punjab
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 300 Ton Bed size - 1200 x 1200 mm

317

ID	MI10195
Make	RMT
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton

318

ID	MI10194
Make	Rolex
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton

319

ID	MA37682
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 250 Ton

320

ID	MA37681
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 80 Ton Capacity - 110 Ton

321

ID	MI10175
Make	SEW
Model	SX100
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 100 Ton

322

ID	MA37674
Make	Arrasate
Model
YOM	1980/2015
Condition	Good Condition
Photo	See Photo
900 TN CAPACITY AT 12.7 MM OF THE P.M.I. TABLE 4000 X 2500 MM AREA OF THE TROLLEY CUSHION 3300 MM 940 MM COURSE 1260 MM CLOSING HEIGHT 96 MM REGULATION 1800 MM SIDE WINDOW

323

ID	MA37662
Make	Komatsu
Model
YOM	1983
Condition	Good Condition
Photo	See Photo
pressure capacity 80 Ton number of strokes (to the bottom of the slide) 335 mm Swid adjustment amount Slide dimensions (left and right x front and back) 500�400mm Bolster dimensions (left and right x front and back x thickness) 1000�600�90mm emergency stop time 158 ms maximum stop time 178 ms Setting position of overrun monitoring device 15

324

ID	MA37656
Make	Federal
Model	60
YOM
Condition	Good Condition
Photo	See Photo
FEDERAL BACK-GEARED O.B.I. PRESS Tonnage Capacity 60 TON Stroke Length 4" Die Space 13" Ram Adjustment 2.25" Ram Area, L-R x F-B 20" x 16" Bed Area, L-R x F-B 32" x 21" Throat Depth 11.5" Incline Positions, Degrees 20-DEGREES Strokes per Minute 45 SPM Drive Motor, Horsepower/RPM 5 HP/1800 RPM Weight, Approximately 12000 LBS EQUIPPED WITH: AIR Clutch & Brake w/Wintress Control Back Geared Design Air Counterbalance - Power Ram Adjustment Dual Palm Buttons

325

ID	MA37655
Make	Federal
Model	60
YOM
Condition	Good Condition
Photo	See Photo
FLYWHEEL-DESIGN O.B.I. PRESS Tonnage Capacity 60 TON Stroke Length 4" Die Space 12.5" Ram Adjustment 2.25" Ram Area, L-R x F-B 20" x 16" Bed Area, L-R x F-B 32" x 21" Throat Depth 11.5" Incline Positions, Degrees 20-DEGREES Strokes per Minute 90 SPM Drive Motor, Horsepower/RPM 5 HP/900 RPM Weight, Approximately 11200 LBS EQUIPPED WITH: AIR Clutch & Brake FLYwheel Drive Air Counterbalance - Power Ram Adjustment Stroke Selector Dual Palm Buttons

326

ID	MA37654
Make	Federal
Model	110
YOM
Condition	Good Condition
Photo	See Photo
110 TON FEDERAL BACK-GEARD O.B.I. PRESS Tonnage Capacity 110 TON Stroke Length 5" Die Space 18" Ram Adjustment 6" Ram Area, L-R x F-B 28" x 21" Bed Area, L-R x F-B 42" x 27" Throat Depth 14.5" Incline Positions, Degrees 20-DEGREES Strokes per Minute 90 SPM Drive Motor, Horsepower/RPM 15 HP/1800 RPM Overall Height 148" Weight, Approximately 31000 LBS EQUIPPED WITH: AIR Clutch & Brake Air Counter Balance Back-Geared Design Power Ram Adjustment Dual Palm Buttons Shadow VII Light Curtains

327

ID	MA37653
Make	Niagara
Model	SC2-200-84-48
YOM
Condition	Good Condition
Photo	See Photo \| See Video
SINGLE-ACTION STRAIGHT SIDE DOUBLE-CRANK PRESS Tonnage Capacity, (Nominal) 200 TON Stroke Length 12" Shut Height, (SDAU) 30" Ram Adjustment, (Power) 10" Slide Area, L-R x F-B 84" x 48" Bed Area, L-R x F-B 84" x 48" Bolster Area, L-R x F-B 84 x 48" Bed Opening, L-R x F-B 69" x 33" Window Opening, W x H 22" x 23" Strokes Per Minute, Variable 20 SPM EQUIPPED WITH: AIR Clutch & Brake w/Wintress Controls Air Counterbalance "SSDC" Straight-Side Frame w/Double-Crank Shadow VI Light Curtains

328

ID	MA37652
Make	Verson
Model	400-B2-120-30
YOM
Condition	Good Condition
Photo	See Photo \| See Video
STRAIGHT-SIDE DOUBLE-GEAR GANG PUNCH/PRESS Tonnage Rating 400 TONS Stroke Length 4" Shut Height 12" Stroke Speed, Maximum 35 SPM Bed Dimensions, L-R x F-B 120" x 23" Ram Dimensions, L-R x F-B 120" x 24" Window Dimensions, L x W 12" x 10" EQUIPPED WITH: Variable Speed Drive Shadow VI Light Curtains

329

ID	MA37651
Make	AIDA
Model	NC2-200(2)
YOM	1986
Condition	Good Condition
Photo	See Photo
Pressurization ability 200 tf stroke length 250 mm Number of continuous strokes without load 25~45 spm die height 500 mm Slide adjustment amount 110 mm main motor 22 kW supply air pressure 5 kgf/cm�

330

ID	MA37647
Make	AIDA
Model	CF1-250
YOM	1993
Condition	Good Condition
Photo	See Photo
C Frame Capacity - 250 Ton Stroke length 160mm No-load stroke number die height Slide adjustment amount 30 mm main motor 1.5 kW kgf/cm Emergency stop time 260 ms maximum two-handed operation 285 ms stop time ray type 280 ms

331

ID	MA37646
Make	Amada
Model	TP110
YOM	1973
Condition	Good Condition
Photo	See Photo
Capacity - 110 Ton Slide adjustment amount main electricity 200V. polster area 1067�650 Tonslide surface 290�240 Refueling points and refueling methods ① Connect bearing Main bearing ① Centralized refueling until ~ Matching cylinder piston/Balancing cylinder shaft Check the oil level occasionally Oil used: Daphne mechanic oil Cylinder air valve for clutch & brake Luficator, check oil level daily Oil used: Daphne Mechanic Oil transmission Fill the oil gauge to the level Flush and change oil every 6 months Oil used: Daphne Hydraulic Fluid Cushion cylinder piston

332

ID	MA37645
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 150 Ton number of strokes 27-55 pm stroke length 256 mm Slide adjustment amount Slide dimensions (left and right x front and rear) 425 mm Bolster dimensions (left and right x front and back x thickness) 500 mm emergency stop time ms maximum stop time ms Setting position of overrun monitoring device Every time Clutch brake stroke amount Maintenance standards solenoid valve Gearbox oil level every 6 months rotary cam limit switch Inspection every 3 months Belt tension every 6 months Balancer air inspection every 6 months gear box

333

ID	MA37632
Make	AIDA
Model	CF1-16
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 160 Ton Stroke length 140 (mm) Strokes per minute 40 (spm) Bolster area (left and right x front and back) 1040x570 (mm) Slide area (left and right x front and rear) 640x440 (mm) Distance between slide bolsters (6) 370 (mm) Slide adjustment length (mm) Main motor 15(kw) Air pressure used Clutch brake 4 /5 (kg/cm�)

334

ID	MA37629
Make	Amada
Model	TT-150
YOM
Condition	Good Condition
Photo	See Photo
Capacity -150Ton pressure capacity 150 ton number of strokes 25-45 pm Stroke length 225mm die height 430mm Slide adjustment amount188 mm Slide bottom dimensions (left and right x front and rear) 700 x 550 mm Bolster dimensions (left and right x front and rear) 1250 x 750 mm emergency stop time maximum stop time Overrun monitoring device/setting position Every time power supply 200 V phase 60 Hz main motor 10 kW Air pressure used kgf/cm�

335

ID	MI10153
Make	ISGEC
Model	GZ-200
YOM	2017
Condition	Good Condition
Photo	See Photo
Capacity : 200 Ton Stroke : 200 mm Stoke per minute : 25-50 Shut Height : 550 mm Throat : 425 mm Slide Face : 1100 x 750 mm Slide Adjustment : 120 mm Bolster Face : 1450 x 850 mm

336

ID	MI10152
Make	AIDA
Model	NC2-200(1)
YOM
Condition	Good Condition
Photo	See Photo
stroke 150mm SPM 35 to 70 Bolster 2420x680 c/w feeder straightener uncoiled

337

ID	MI10151
Make	Milap
Model	MMC-150
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 150 Ton C Frame Bed Area : 1005 x 705 mm Day Light : 505 mm Slide Stroke Length : 128 mm Shut Height : 377 mm Screw Adjustement : 50 mm Shank Hole : 55 mm No. of Slide Stroke : 40 mm

338

ID	MI10142
Make	Komatsu
Model	E2P400
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 400 Ton. Area Of Ram. 98.4" X 61" {2500 MM X 1550 MM} Area Of Bolster. 98.4" X 61" {2500 MM X 1550 MM} Thickness Of Bolster. 7.9" {200 MM}. Stroke Length. 19.7" {500 MM} Cushion Type. Pneumatic. Slide Adjustment. 17.7" {450 MM} Shut Height To Bolster. With Standard Bolster. Max. 36" {915 MM}. Min. 18.3" {465 MM}.

339

ID	MI10141
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Double Action Ram Tonnage Inner 600 Ton. Outer 400 Ton. Area Of Ram. Inner 78" X 41.3" {1981 MM X 1049 MM}. Outer 98.4" X 61" {2500 MM X 1550 MM}. Area Of Bolster. 98.4" X 61" {2500 MM X 1550 MM}. Thickness Of Bolster. 11.8" {300 MM}. Stroke Length. Inner 33" {838 MM}. Outer 22" {559 MM}. Cushion Type. Pneumatic. Slide Adjustment. Inner 12" {305 MM}. Outer 12" {305 MM}. Shut Height To Bolster. Inner Max. : 60" {1524 MM}. Max. : 48.2" {1224 MM}. Outer Max. : 55" {1397 MM}. Max. : 43.2" {1097 MM}.

340

ID	MI10140
Make	USI
Model	S4-400
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 400 Ton. Area Of Ram. 84" X 60" {2134 MM X 1524 MM} Area Of Bolster. 84" X 60" {2134 MM X 1524 MM} Thickness Of Bolster. 6" {152 MM}. Thickness Of Additional Bolster. 11" {279 MM} Stroke Length. 20" {508 MM} Opening In Bed. 2 Openings. (1 Cross Rib) 74" X 44" {1880 MM X 1118 MM} Cushion Type. Pneumatic. Slide Adjustment. 12" {305 MM} Shut Height To Bolster. With Standard Bolster. Max. 30" {762 MM}. Min. 18" {457 MM}. With Additional Bolster. Max. 19" {483 MM}. Min. 7" {178 MM}.

341

ID	MI10139
Make	USI
Model	D2-600-400
YOM
Condition	Good Condition
Photo	See Photo
Double Action Ram Tonnage Inner 600 Ton. Outer 400 Ton. Area Of Ram. Inner 78" X 42" {1981 MM X 1067 MM}. Outer 96" X 60" {2438 MM X 1524 MM}. Area Of Bolster. 96" X 60" {2438 MM X 1524 MM}. Thickness Of Standard Bolster. 11" {279 MM}. Thickness Of Additional Bolster. 12" {305 MM}. Opening In Bed. 2 Opening. 81" X 39" {2057 MM X 991 MM}. Stroke Length. Inner 33" {838 MM}. Outer 22" {559 MM}. Cushion Type. Pneumatic. Slide Adjustment. Inner 12" {305 MM}. Outer 12" {305 MM}. Shut Height To Bolster. Inner With Standard Bolster. Max. : 60" {1524 MM}. Min. : 48" {1219 MM}. With Additional Bolster. Max. : 58" {1473 MM}. Min. : 36" {914 MM}. Outer With Standard Bolster. Max. : 55" {1397 MM}. Min. : 43" {1092 MM}. With Additional Bolster. Max. : 43" {1092 MM}. Min. : 31" {787 MM}.

342

ID	MI10138
Make	USI
Model	S2-300
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 300 Ton. Area Of Ram. 120" X 84" {3048MM X 2134 MM} Area Of Bolster. 120" X 84" {3048MM X 2134 MM} Stroke Length. 12" {305 MM} Opening In Bed. 48" X 15" {1219 MM X 381 MM} Slide Adjustment. 12" {305 MM} Shut Height To Bolster. Max. 26" {660 MM}. Min. 14" {356 MM}.

343

ID	MI10137
Make	USI
Model	S4-400
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 400 Ton. Area Of Ram. 108" X 72" {2743 MM X 1829 MM} Area Of Bolster. 108" X 72" {2743 MM X 1829 MM} Thickness Of Bolster. 8" {203 MM}. Thickness Of Additional Bolster. 12" {305 MM} Stroke Length. 24" {609.5 MM} Opening In Bed. 2 Openings. (1 Cross Ribs) Cushion Type. Pneumatic. Slide Adjustment. 24" {609.5 MM} Shut Height To Bolster. With Standard Bolster. Max. 46" {1168 MM}. Min. 22" {559 MM}. With Additional Bolster. Max. 34" {864 MM}. Min. 10" {254 MM}.

344

ID	MI10136
Make	USI
Model	D2-600-400
YOM
Condition	Good Condition
Photo	See Photo
Double Action Ram Tonnage Inner 600 Ton. Outer 400 Ton. Area Of Ram. Inner 90" X 54" {2286 MM X 1372 MM}. Outer 108" X 72" {2743 MM X 1829 MM}. Area Of Bolster. 108" X 72" {2743 MM X 1829 MM}. Thickness Of Standard Bolster. 11" {279 MM}. Thickness Of Additional Bolster. 12" {305 MM}. Opening In Bed. 2 Opening. 93" X 51" {2362 MM X 1295 MM}. Stroke Length. Inner 38" {965 MM}. Outer 26" {660 MM}. Cushion Type. Pneumatic. Slide Adjustment. Inner 24" {609.5 MM}. Outer 24" {609.5 MM}. Shut Height To Bolster. Inner With Standard Bolster. Max. : 80" {2032 MM}. Min. : 56" {1422 MM}. With Additional Bolster. Max. : 68" {1727 MM}. Min. : 44" {1118 MM}. Outer With Standard Bolster. Max. : 78" {1981 MM}. Min. : 54" {1372 MM}. With Additional Bolster. Max. : 66" {1676 MM}. Min. : 42" {1067 MM}.

345

ID	MI10134
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 500 Ton. Area Of Ram. 157.5" X 84" {4000 MM X 2145 MM} Area Of Bolster. 157.5" X 84" {4000 MM X 2145 MM} Stroke Length. 23.6" {600 MM} Slide Adjustment. 17.7" {450 MM} Shut Height To Bolster. With Standard Bolster. Max. 65" {1650 MM}. Min. 18.3" {465 MM}.

346

ID	MI10132
Make	USI
Model	S4-600
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage 600 Ton. Area Of Ram. 144" X 96" {3658 MM X 2438 MM} Area Of Bolster. 144" X 96" {3658 MM X 2438 MM} Thickness Of Bolster. 12" {305 MM}. Thickness Of Additional Bolster.7" {188 MM}. Stroke Length. 30" {762 MM} Opening In Bed. 3 Openings. (2 Cross Ribs) 129" X 69" {3276.5 MM X 1753 MM} Cushion Type. Pneumatic. Slide Adjustment. 24" {609.5 MM} Shut Height To Bolster. With Standard Bolster. Max. 65" {1651 MM}. Min. 41" {1041 MM}. With Additional Bolster. Max. 58" {1473 MM}. Min. 34" {864 MM}.

347

ID	MI10130
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 450 Ton Motor HP : 50 HP Area of Ram : 96''x60'' (2438mm x 1524mm) Area of Bolster : 96''x60'' (2438mm x 1524mm) Stroke Length : 20'' (508mm) Cushion Type : Pneumatic Slide Adjustement : 20'' (508mm) Shut Height to Bolster : Max. 30'' (762 mm) Min. 10'' (254mm)

348

ID	MI10129
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo
Double Action Ram Tonnage : Inner - 225 Ton Outer - 125 Ton Area of Ram : Inner - 32''x32'' (813mm x 813mm) Outer - 48''x48'' (1219mm x 1219mm) Area of Bolster : 48''x48'' (1219mm x 1219mm) Stroke Length : 20'' (508mm) Cushion Type : Pneumatic Slide Adjustement : Inner - 20'' (508mm) Outer - 20'' (508mm) Shut Height to Bolster : Inner - Max. 38''' (965mm) Min. 18'' (457mm) Outer - Max. 32'' (813mm) Min. 12'' (305mm)

349

ID	MI10128
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 250 Ton Motor HP : 30 Hp Area of Ram : 48''x36'' (1219mm x 914mm) Area of Bolster : 48''x36'' (1219mm x 914mm) Stroke Length : 12'' (305mm) Cushion Type : Pneumatic Slide Adjustement : 12'' (305mm) Shut Height to Bolster : Max. 24'' (610mm) Min. 12'' (305mm)

350

ID	MI10127
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 500 Ton Motor HP : 40 HP Area of Ram : 42''x36'' (1067mmx914mm) Area of Bolster : 42''x36'' (1067mmx914mm) Stroke Length : 12'' (305mm) Cushion Type : Pneumatic Slide Adjustement : 12'' (305mm) Shut Height to Bolster : Max. 25.5'' (648mm) Min. 13.5'' (343 mm)

351

ID	MI10125
Make	USI
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 800 Ton Motor HP : 75 HP Area of Ram : 54''x48'' (1372mmx1219mm) Area of Bolster : 54''x48'' (1372mmx1219mm) Stroke Length : 12'' (305mm) Cushion Type : Pneumatic Slide Adjustement : 12'' (305mm) Shut Height to Bolster : Max. 24'' (610mm) Min. 12'' (305mm)

352

ID	MI10124
Make	USI
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 500 Ton Motor HP : 50 HP Area of Ram : 48''x42'' (1219mmx1067mm) Area of Bolster : 48''x42'' (1219mmx1067mm) Stroke Length : 12'' (305mm) Cushion Type : Pneumatic Slide Adjustement : 12'' (305mm) Shut Height of Bolster : Max. 24'' (610mm) Min. 12'' (305mm)

353

ID	MI10123
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 500 Ton Motor Hp : 40 HP Area of Ram : 54''x48'' (1372mmx1219mm) Area of Bolster : 54''x48'' (1372mmx1219mm) Stroke Length : 12'' (305mm) Cushion Type : Pneumatic Slide Adjustement : 12'' (305mm) Shut Height to Bolster : Max. 24'' (610mm) Min. 12'' (305mm)

354

ID	MI10121
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Single Action Ram Tonnage : 2500 Ton Motor HP : 150 HP Area of Ram : 300'' x 48'' (7620 mm x 1219mm) Area of Bolster : 300'' x 64'' (7620 mm x 1625 mm) Stroke Length : 18'' (457mm) Cushion Type : Pneumatic Slide Adjustement : 20'' (508mm) Shut Height to Bolster : Max. 40'' (1016mm) Min. 20'' (508mm)

355

ID	MI10120
Make	USI
Model	D4-1000-600
YOM
Condition	Good Condition
Photo	See Photo
Double Action Ram Tonnage Inner 1000 Ton Ram Tonnage Outer 600 Ton Area of Ram Inner 126" x 78" (3200mm x 1981mm) Area of Ram Outer 144" x 96" (3658mm x 2438mm) Area of Bolster 144" x 96: (3658mm x 2438mm) Thickness of Standard Bolster 12" (305mm) Thickness of Additional Bolster 12" (305mm) Opening in Bed 2 Opening 129" x 75" (3277mm x 1905mm) Stroke Length Inner 38" (965mm) Stroke Length Outer 27" (686mm) Cushion type Pneumatic Slide Adjustment Inner 24" (609.5mm) Slide Adjustment Outer 24" (609.5mm) Shot Height to Bolster Inner With Standard Bolster Max.79" (2007mm)

356

ID	MA37616
Make	Verson
Model	SE4-600-132-86
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 600 Ton Bed area 132"x86" Stroke length 22" Shut height (sdau over bed) 64" Adjustment 24" Opening in side columns (windows) 60" Strokes per minute 14 Equipped With (3)cushions 35.3 tons @100psi 11"stroke, Hydraulic Tie Rod Nuts

357

ID	MA37610
Make	Danly
Model	SS4-600-132-84
YOM
Condition	Good Condition
Photo	See Photo
Capacity:600 Ton

358

ID	MA37555
Make	Verson
Model	S2-500-144-60T
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 500 Ton Bed Area: 144″ x 60″ Stroke: 12″ Stroke Shut Height: 46″ (S.D.A.U. to Top of Bed) Adjustment: 8″ SPM: 15-30 Variable Windows: 37-1/2″ Wide x 59″ H Isolation Pads Equipped With Ceico Press Controls (Updated Controls) Ceico Automator Die Protection Air Clutch & Brake Operator T-Stand 8″ Thick T-Slotted Bolster

359

ID	MI10067
Make	Basant
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 150 Ton Table 750X780X210 mm thick SHUT HEIGHT 500 mm

360

ID	MA37539
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:200 Ton SPM:40 - 100 Stroke:200 mm Die Height:450 mm Adjust:100mm Bolster:1500 x 900 mm Slide:1500 x 1100 mm H FRAME

361

ID	MA37538
Make	Verson
Model	L4-500-108-72T
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Bed Area 108" x 72" Stroke 24" Shut Height 76" SDAU to bed (52" to bolster) Adjustment 27" Speed 6-20 SPM Nots Link Motion SPM 20 strokes/min Vari Speed Yes Air Clutch Yes

362

ID	MI9990
Make	Mankoo
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 150 Ton

363

ID	MA37500
Make	Patec Aisaku
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 Ton No of strokes : 40-80 spm Slide Stroke : 150 mm Die Height : 450 mm Slide Adjustement : 50 mm Slide Area : 2200 x 700 mm Bolster Area : 2200 x 800 mm Main Motor 30 kw

364

ID	MI9989
Make	Cowlishaw Walker
Model
YOM
Condition	Good Condition
Photo	See Photo
C- Frame Capacity -400 Ton 6 � stroke Weight 45 Tons

365

ID	MA37495
Make	Bliss
Model	S1-150
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 150 Table - width (mm) 1000 Table - x (mm) 1000 Table - y (mm) 800 Slide - y (mm) 800 Slide - x (mm) 800 Slide - adjustable stroke (mm) 100 Piston rods 1 Number of strokes/minute 30 Tdc span (mm) 600 Lateral window (mm) 200 External dimensions - X (mm) 2000 Slide - stroke (mm) 200 Number of strokes / min 30

366

ID	MI9987
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 200 Ton Chal 8" Gap 22 Bed 31"x46" Gear 52" Motor 3Phase/20Hp

367

ID	MA37487
Make	ROVETTA
Model
YOM
Condition	Good Condition
Photo	See Photo
Normal Pressure 250 tons Adjustable Stroke 300 mm Slide Adjustment 203 mm Strokes Per Minute 10-20 no Distance Between Uprights 1,580 mm Dimensions Of Bolster 1,520 x 1,220 mm Dimensions Of Slide 1,520 x 1,220 mm Openings In The Bed 1,130 x 830 mm Thickness Of Bolster 150 mm Openings For K.O. Bars 3 no Openings In The Uprights 700 x 500 mm Adjustment Of The Motor Slide 25 KW Cushions 1 no Total Cushions Capacity 600 KN Dimensions Of Single Pressure Pad 1,100 x 800 mm Cushion stroke 15-150 mm Table Size 1,500 x 1,220 With Complet Stetener And Feeder Complete Line Automatic

368

ID	MA37486
Make	Cotelli
Model	P.130FRL
YOM
Condition	Good Condition
Photo	See Photo
Normal pressure 130 Tons Adjustable stroke 150 mm Slide adjustment 100 mm Mold Holder Diameter 50 mm Drive Engine 15 HP ATM. Clutch Operation Manual 5.5 ATM. Balancer Cylinder Operating Instructions 4/6 Table Size 650 x 1,100 mm

369

ID	MA37485
Make	Radaelli
Model
YOM
Condition	Good Condition
Photo	See Photo
Maximum pressure 220 tons Fixed stroke 200 mm Maximum distance between table and slide 850 mm Table dimensions 1,550 x 1,200 mm Clearance Between Uprights 1,550 mm Hits Per Minute/First 20 n� Possibility of adjusting the hammer 120 mm Pneumatic Blank Holder Power 14 Ton Stroke 140 mm blank holder Main Engine Power 20 HP

370

ID	MI9975
Make	Milap
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 150 Ton Table size 1150 x780 mm Shut height 550 mm With double bed In single bed 650 mm

371

ID	MA37466
Make	Komatsu
Model	OBS110A
YOM	1978
Condition	Good Condition
Photo	See Photo
Capacity : 110 Ton Stroke Length : 110 mm Die Height : 380 mm Slide Adjustement : 100 mm Number of Strokes : 60-120 Bolster Dimensions : 1100x700x100 mm Slide Dimensions : 600x450

372

ID	MA37465
Make	Wasino,Japan
Model	PUX100S
YOM	1971
Condition	Good Condition
Photo	See Photo
Capacity : 100 Ton Die Height : 400 mm Stroke Length : 130 mm Number of strokes : 35-55 Adjustement amount : 80 mm Slide Dimensions : 600x450 mm Bolster Area : 1020x600 mm

373

ID	MA37464
Make	Amada
Model	TPL 150L
YOM	1993
Condition	Good Condition
Photo	See Photo
Capacity : 150 Ton Number of strokes : 25-45 Stroke Length : 250 mm Die Height : 420 mm Slide Adjustement : 100 mm Slide Dimensions : 100x550 mm Bolster Dimensions : 1250x750

374

ID	MI9963
Make	Agostino Colombo
Model
YOM	2001
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 350 Ton Bed area : 2000x1410 mm Stroke Length : 200 mm Slide Base Area : 1990x1210 mm Slide Adjustement : 200 mm Shut Height : 300 mm Operating Motor : 40 HP

375

ID	MA37441
Make
Model	S4-900-180-96
YOM	completely overhauled in 2010
Condition	Good Condition
Photo	See Photo
Capacity - 900 ton With cushion and moving bolster Dimension table 2464 x 4572 mm Slide stroke 940 mm Height die close 1.778 mm Adjustment 762 mm Stroke par minute 16 Video available but not under pressing power ( main power disconnected, factory liquidation )

376

ID	MA37438
Make	Muller Weingarten
Model	VK2000.50/25.110
YOM
Condition	Good Condition
Photo	See Photo
PRESS CAPACITY 2000 TONS STROKE OF PRESS 1100MM SPEED S.P.M 8-16 SHUT HEIGHT MAX S.D.A.U 1900MM SHUT HEIGHT MIN S.D.A.D 1600MM SLIDE ADJUSTMENT 300MM BOLSTER THICKNESS 380MM SLIDE AREA LEFT TO RIGHT/FRONT TO BACK 5000 X 2500MM BED AREA LEFT TO RIGHT/FRONT TO BACK 5000 X 2500MM HYDRAULIC BED DIE CUSHION CAPACITY/STROKE 500TON/100/400MM MOVING BOLSTER 5000MM X 2500MM X 380MM

377

ID	MA37437
Make	Schuler
Model	EBS4-1000-4.6-850
YOM
Condition	Good Condition
Photo	See Photo
PRESS CAPACITY 1000 TONS STROKE OF PRESS 850MM SPEED S.P.M 7-14 SHUT HEIGHT MAX S.D.A.U 1500MM SHUT HEIGHT MIN S.D.A.D 1000MM SLIDE ADJUSTMENT 500MM BOLSTER THICKNESS 300MM SLIDE AREA LEFT TO RIGHT/FRONT TO BACK 4600 X 2200MM BED AREA LEFT TO RIGHT/FRONT TO BACK 4600 X 2200MM BED DIE CUSHION CAPACITY/STROKE 240 TON/250MM SLIDE CUSHION CAPACITY/STROKE 160 TON/200MM

378

ID	MA37436
Make	USI Vickers
Model	S4-1200-180-96
YOM
Condition	Good Condition
Photo	See Photo
PRESS CAPACITY 1200 TONS STROKE OF PRESS 914MM SPEED S.P.M 6-12 SHUT HEIGHT MAX S.D.A.U 1778MM SHUT HEIGHT MIN S.D.A.D 1270MM SLIDE ADJUSTMENT 508MM BOLSTER THICKNESS 305MM SLIDE AREA LEFT TO RIGHT/FRONT TO BACK 4570 X 2240MM BED AREA LEFT TO RIGHT/FRONT TO BACK 4570 X 2240MM BED DIE CUSHION CAPACITY/STROKE 240 TON/203MM SLIDE CUSHION CAPACITY/STROKE 120 TON/152MM

379

ID	MA37435
Make	Erfurt
Model
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
Control: PLC SIEMENS S5 PRESS eccentric / crank drive system H-frame, mono block frame design openings in uprights 2 suspensions 2 1 slide action 1 table cushion quick die change system feedstock left to right FORCE total force (nominal) 400 ton nominal wo 32 kNm TABLE table surface (left-right 2,600 mm table surface (front-back) 990 mm thickness of bolster plate 200 mm height above floor level 800 mm opening in bed (left-right) 2,250 mm opening in bed (front-back) 280 mm SLIDE slide force 400 ton table surface (left-right) 2,600 mm table surface (front-back) 990 mm stroke 210 mm stroke rate (max.) 90 /min SLIDE (MECHAN. PRESS) slide 150 mm stroke rate (min.) 25 /min stroke rate (max.) 90 /min hydraulic overload protection main drive power 72 kW SLIDE EJECTOR / CUSHION number of ejectors 13 nominal force 3.7 ton stroke 89 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC 705 mm distance between columns (H-frame) 2900 mm passline opening (free passage in side columns) 900 mm free passage between side columns (height) 545 mm COIL CHAIR max. weight of coil 3 ton stroke 550 mm DECOILER single reel, traversable sheet width max 400 mm sheet width (min) 30 mm max. weight of coil 3 ton max. diameter of coil 1,500 mm mandrel expansion range from 460 mm mandrel expansion range up to 530 mm LEVELLER UNIT sheet width max 400 mm sheet thickness max 5 mm sheet thickness (min) 0.5 mm number of leveller rolls 9 dia of leveller rolls 50 mm number of in-/outfeed rolls 2 dia of feed rolls 150 mm loop controls STRIP-FEEDER roll type feeder type roll diameter 120 mm pilot release TRANSFER SYSTEM distance between tools, stroke X max. 300 mm distance between tools, stroke X min. 90 mm Inner width clamping rails closed max. 340 mm ELECTRICAL SPECIFICATIONS mains voltage 400 V mains frequency 50 Hz DIMENSIONS / WEIGHTS height above floor level 6,300 mm total weight approx. 73,000 kg Coil line KOHLER Zig-zag feed 2-axis transfer unit Press force monitoring BRANKAMP cushion mounting bar in table with exchangeable pneumatic cushion units MAYFRAN scrap conveyor (cross conveyor)

380

ID	MA37420
Make	Amada
Model	SW300
YOM
Condition	Good Condition
Photo	See Photo
Amada press double crank capacity:300 Ton length of stroke : 300mm strokes perminute (No load):20-40spm die height : 600mm slide adjustment : 160mm slide dimensions (LRFB) : 1800x 1000mm bolster dimensions (LRFB) : 2000x1200mm

381

ID	MA37419
Make	AIDA
Model	CP 400
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton Stroke length: 305mm Number of stroke: 30-80 s.p.m Die height: 750mm Adjust: 150mm BOLSTER: 2030 x 1380 mm RAM :1900 x 1200 mm Double Crank Press Motor : 37KW Cushion : Yes

382

ID	MA37418
Make	AIDA
Model	NC1-15(1)-B
YOM	1989
Condition	Good Condition
Photo	See Photo
ability 150 Ton Stroke length 130 mm strokes per minute (SPM) 40-85 Die height (size, card) 360 mm Slide adjustment length 100 mm Holster area (left and right x front and back) 700 x 580 mm Slide area (left and right x front and back) 1170 x 600 mm Main motor 11 KW Operating air pressure (kgf/cm�) 5 sudden stop time maximum (mS) 290 Sudden stop time (mS) 170 Two-handed operation (mS) 170 Overrun monitoring device setting position

383

ID	MA37417
Make	AMA-AUTO
Model	AC1-15N
YOM
Condition	Good Condition
Photo	See Photo
ability 150 Ton number of strokes 30-60 s.p.m. stroke length 200 mm die height 45.0 mm slide adjustment length 100 mm Slide dimensions (left, right, front and back) 700�500mm Bolster dimensions (left and right front) 1250�700mm Emergency stop time (Ts) 152 ms Maximum stopping time (Tr+Ts) 107 ms ray type 172 ms Overrun detection position 15 degrees main motor 1 kW two-handed operation 4 P slide adjustment motor 4kW using electric 1200V Phase 3 Hz Air pressure used 5 kgf/cm�

384

ID	MA37371
Make	Schuler
Model	E4-1500-5-0.8
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity - 1500 Ton Double column press Pre�kraft ab 20 mm vor U.T. 1500 Mp Hub 800 mm Hubzahl 10 /min adjustability 600 mm main engine 1500 U/min 90 kW Width between stands 5060 mm Table surface width x depth 5000 x 2700 mm Ram surface width x depth 5000 x 2700 mm Distance between clamping plate and plunger at bottom stroke. Adjustment above 1600 mm Compressed air pulling device in the table Kraft bei 6 atu 225 Mp Hub 200 mm Ejector in the ram Kraft bei 6 atu 95 Mp Hub 150 mm

385

ID	MA37369
Make	Erfurt
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
ERFURT PDM-2-600/3500 (1989)--------------------------- Qty -1 MAXIMUM ADJUSTABLE PRESSING EFFORT 600 T MAXIMUM ADJUSTABLE STRENGTH OF THE CUSHION 240 T MAXIMUM ADJUSTABLE RECOIL EFFORT 91 T MAXIMUM ADJUSTABLE FILLER PRESSURE 266 bar MAXIMUM ADJUSTABLE CUSHION PRESSURE 266 bar PILOT PRESSURE 25 bar NUMBER OF MAIN CYLINDERS 2 NO. OF CUSHION CYLINDERS 4 EXTERIOR DIMENSIONS OF THE TABLE 3500 X 2190 mm USEFUL DIMENSIONS BETWEEN STUDS (FRONT) 2390 mm USEFUL DIMENSIONS BETWEEN STUDS (SIDE) 2850 X 1500 mm DIMENSIONS OF THE MOBILE CUSHION TABLE 2850 X 1500 mm MAXIMUM OPENING BETWEEN TABLES 2550 mm MINIMUM OPENING BETWEEN TABLES 350 mm MAXIMUM ADJUSTABLE TRAVEL OF THE FILLING TABLE 2200 mm MAX. TRAVEL ADJUSTABLE TABLE CUSHION 550 mm DRIVE POWER 98 H.P. WORKING HEIGHT 450 mm CONSTANT APPROACH SPEED 400 mm/s WORKING SPEED FROM 80 TO 370 CONSTANT T. 29 mm/s WORKING SPEED FROM 250 TO 600 VARIABLE T. 29 to 13 mm/s MAXIMUM REVERSE SPEED 270 mm/s MAXIMUM CUSHION ASCENT SPEED 90 mm/s ERFURT PDM-2-600/4600 (1989)-----------------------------QTY-2 MAXIMUM ADJUSTABLE PRESSING EFFORT 600 T MAXIMUM ADJUSTABLE STRENGTH OF THE CUSHION 240 T MAXIMUM ADJUSTABLE RECOIL EFFORT 91 T MAXIMUM ADJUSTABLE FILLER PRESSURE 266 bar MAXIMUM ADJUSTABLE CUSHION PRESSURE 266 bar PILOT PRESSURE 25 bar NUMBER OF MAIN CYLINDERS 2 NO. OF CUSHION CYLINDERS 4 EXTERIOR DIMENSIONS OF THE TABLE 4600 X 2490 mm USEFUL DIMENSIONS BETWEEN STUDS (FRONT) 4800 mm USEFUL DIMENSIONS BETWEEN STUDS (SIDE) 2850 X 1500 mm DIMENSIONS OF THE MOBILE CUSHION TABLE 2850 X 1500 mm MAXIMUM OPENING BETWEEN TABLES 2550 mm MINIMUM OPENING BETWEEN TABLES 350 mm MAXIMUM ADJUSTABLE TRAVEL OF THE FILLING TABLE 2200 mm MAX. TRAVEL ADJUSTABLE TABLE CUSHION 350 mm DRIVE POWER 98 H.P. WORKING HEIGHT 450 mm CONSTANT APPROACH SPEED 400 mm/s WORKING SPEED FROM 80 TO 370 CONSTANT T. 29 mm/s WORKING SPEED FROM 250 TO 600 VARIABLE T. 29 to 13 mm/s

386

ID	MA37353
Make	Niagara
Model
YOM
Condition	Good Condition
Photo	See Photo
Niagara Straight Side Press 120 x 60 bed size 16" Stroke, 33" Shut Height, 14" Adjustment, 12-25 SPM, 27" Windows, Floor Standing, T-Slotted Slide, 7.5" T-Slotted Bolster, Rockford Press Controls, Air Clutch & Brake (2) cushions

387

ID	MA37335
Make	ROVETTA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -150 Ton H-frame - Two Conrods Table dimensions ( x-y/mm) : 1200x800 Slide dimensions ( x-y/mm) :1000x800 Stroke ( x/mm) : 110 Adjustment slide ( x/mm) : 100 Light at tdc ( x/mm) :560 Stroke per minute : from 40 to 80

388

ID	MA37334
Make	Pressix
Model
YOM
Condition	Good Condition
Photo	See Photo
C-frame one conrod Capacity - 200 Ton Table dimensions ( x-y/mm) : 1300x800 Slide dimensions ( x-y/mm) :900x600 Stroke ( x/mm) : from 9 to 220 Adjustment slide (x/mm) : 120 Light at tdc ( x/mm) : 670 Stroke per minute :45 Hydraulic overload Ce marked

389

ID	MA37331
Make	Erfurt
Model	PE4HH500
YOM	1991 overhauled in 2009
Condition	Good Condition
Photo	See Photo
Capacity - 550 on Bed -110" x 71" (2800mm x 1800 mm) Stroke - 25" (630mm) Strokes per minute - 10 to 25 (Variable) Shut Height - 38.5"(980mm) Adjustment - 16" (400mm) T-slotted Ram and Bolster Windows Daual rolling Bolsters (through columns) Siemens S7 Controller May be inspected under power in plant Includes cost to dismantle and load to trucks

390

ID	MA37330
Make	Mossini
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Power ( ton) : 500 Table dimensions ( x-y/mm) : 3000x1500 Slide dimensions ( x-y/mm) :3000x1500 Stroke ( x/mm) : from 20 to300 Adjustment slide (x/mm) : 200 Light at tdc ( x/mm) :1300 Stroke per minute : from 18 to 45 Feeding line Camu 1000x3 Ce Marked

391

ID	MA37323
Make	WMW Erfurt,Germany
Model	PKZZI500
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 500 ton Table size 2800 x 1500 mm Ram size 2800 x 1500 mm Ram stroke 500 mm Ram adjustment 500 mm Strokes per minute 20 Shut-height 1100 mm Distance between columns 2800 mm Weight ca. 85ton

392

ID	MA37297
Make	Komatsu
Model	E2P300
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity -300 Ton Number of Strokes 15-25 SPM Stroke Length 450mm Die Height 840mm Adjustment amount 350mm Slide 2500 x 1200 mm Bolster 2500 x 1300mm

393

ID	MA37291
Make	Erfurt
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 600 Ton

394

ID	MA37278
Make	Fukui
Model	TEF1500E
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity -1500 Ton 13 mm Stroke 750mm SPM 10-27 Adjust 100 mm Die Height 1000mm Bolster 4500 x 2100mm Slide 4700 x 2100mm 5.0 220kW 8.5 kW 6 420ms 15 10-7

395

ID	MA37277
Make	Komatsu
Model	E45-350-370-215
YOM
Condition	Good Condition
Photo	See Photo
Capacity -300 Ton Stroke 250mm SPM 20-60 Adjust 200 mm Die Height 1100mm Bolster 3700 x 2150mm Slide 3700 x 2150mm Leveler feeder Make - Sonoruka Feed Stroke 50-2800mm Material Thickness 0.6-2.3mm Material Width 300-1620mm

396

ID	MA37274
Make	WMW Erfurt,Germany
Model	PKZV800/4000FS
YOM
Condition	Good Condition
Photo	See Photo
Press is with moving table Front to back. Max. force of slide: 800 tons Stroke of slide: 500 mm Adjustability of slide: 500 mm Max. daylight between bolster and slide (SDAU): 1200 mm Width between columns: 4000 mm Slide area (WxD): 4000x2500 mm Bed area (WxD): 4000x2500 mm Opening in bed (WxD): 3520x1520 mm Moving table height: 630 mm Main motor power: 90 kW Idle stroke rate per 1 min: 14 Counterpressure of cushion in bed: 160 tons Stroke of cushion plate: 200 mm Height above ground: 8400 mm Press weight: 210000 kg

397

ID	MA37261
Make	Fukui
Model	SCF-200S
YOM	1984
Condition	Good Condition
Photo	See Photo
Capacity - 200 Ton Stroke: 140mm S.P.M: 35 Die height: 310 Adjust: 70 bolster-700x750mm

398

ID	MA37252
Make	Fukui
Model	MDC500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 500 ton SPM 50 - 160 Stroke 80 mm Die Height 550 mm Adjust 150 mm Slide 2500 x 1200 mm Bolster 2500 x 1200 mm With Die Cushion

399

ID	MA37201
Make	Weingarten
Model	DH1000.15.13
YOM	1992
Condition	Good Condition
Photo	See Photo
Pressure capacity 1000 t Retraction force 100 t Clear height between the heating plates Nmvsh of table and ram: Top stroke 1500 mm Bottom stroke 200 mm Ram stroke 1300 mm Table clamping surface L x W 1500 x 1250 mm Ram clamping surface L x W 1500 x 1250 mm Breakthrough in the Side stands W x H 300 x 800 mm Height from floor to top edge of table heating plate 2410 mm Machine height above floor 5770 mm Weight 65,000 kg Accessories / Special features: � Oil-hydraulic cushion in the table, optionally controllable for �0-pressure� and �ejector� � Ejector force 100 t � Retraction force 50 t � Ejector stroke 80 mm � Cushion area L x W 1000 x 950 mm � Oil-hydraulic cushion in the ram, Optionally controllable for �0-pressure� and �ejector� � Ejector force 100 t � Retraction force 50 t � Ejector stroke 80 mm � Cushion area L x W 1060 x 950 mm � Operating instructions In 1992, the cylinders were honed and provided with new seals and the guides were completely new sanded and refitted. The entire hydraulic system (pumps, hydraulic block, valves, etc.) was renewed. The hydraulic oil has already been drained.

400

ID	MA37186
Make	Amada
Model
YOM
Condition	Good Condition
Photo	See Photo
C Frame Press Capacity 200 ton Stroke 254 mm SPM 30 Die Height 638 mm Adjust 100 mm Bolster 1450 x 850 mm Slide 1320 x 820 mm With Die Cushion

401

ID	MA37182
Make	Amada
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -200 ton Stroke 300 mm SPM 25 Die Height 625 mm Adjust 125 mm Bolster 2100 x 1300 mm Slide 1800 x 1000 mm Die Cushion 40 ton Die Cushion Stroke 150 mm Cushion Pad Size 740 x 720 mm

402

ID	MI9677
Make	Amada
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 60 Ton SPM:48-54 Stroke:178 mm Die Height:497 mm Adjust:76 mm Slide:460 x 340 mm Bolster:815 x 535 With Die Cushion

403

ID	MI9676
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 35 Ton

404

ID	MA37166
Make	STANKO
Model	P0443
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Cold stamping press Capacity, tons: 2000 Nominal liquid pressure, kg/cm�: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000

405

ID	MA37162
Make	Dongsung
Model	DA-5000-30
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity - 500 Ton Stroke 400 Die height 800 Bolster 3000x1600

406

ID	MA37147
Make	Heim
Model	S2-400
YOM	1994
Condition	Good Condition
Photo	See Photo
DOUBLE CRANK PRESS MODEL - S2-400 MAXI STAMPER CAPACITY - 400 TONS STROKE -10" SHUT HEIGHT (SDAU) - 32" RAM ADJUSTMENT (POWER) - 12" STROKES PER MINUTE - 20 TO 40 AREA OF BED - 100" X 48" AREA OF RAM (T-SLOTTED) - 100" X 48" BOLSTER SIZE (T-SLOTTED) - 100" X 48" X 8" WINDOW OPENING - 26-3/4" AIR CLUTCH & BRAKE - YES AIR COUNTERBALANCES - YES WINTRESS CLUTCH & BRAKE CONTOL . SMARTPAC FLOOR STANDING - YES DUAL PALM BUTTONS - YES LUBE SYSTEM - AUTOMATIC MOTOR HORSEPOWER - 40

407

ID	MI9618
Make	Erfurt
Model	EC502
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 500 Ton Bolster Size : 2800 x 1500 mm Slide Size : 2800x1500 mm SPM : 20 Nos. Shut Height : 670 mm Adjustment : 150 mm Stroke Length : 400 mm

408

ID	MA37049
Make	Erfurt
Model	500 T
YOM
Condition	Good Condition
Photo	See Photo
Pressure Capacity : 500 Ton Table Dimensions : 2.800 x 1.600 mm Hammer Fix Stroke : 500 mm Distance Between Table - Hammer : 1.150 � 1.650 mm Cushion Stroke : 200 mm Cushion Pressure Capacity : 250 Ton Machine Weight : 92,000 KG

409

ID	MA37048
Make	Agostino Colombo
Model	400 T
YOM
Condition	Good Condition
Photo	See Photo
Pressure Capacity : 400 Ton Table Dimensions : 2.500 x 1.600 mm Hammer Fix Stroke : 320 mm Distance Between Table - Hammer : 780 � 1.100 mm Cushion Stroke : 200 mm Cushion Pressure Capacity : 40 Ton Machine Weight : 58,000 KG

410

ID	MA37024
Make	Sato
Model	CL-400-250-150
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton Stroke: 250mm Bolster Size: 2200 x 1500mm RAM Size: 2000 x 1300mm Die Height: 700mm SPM: 20 ~ 40

411

ID	MA36996
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Cam Link Press Capacity 1000 T Shut Height 1000mm Slide Stroke 250mm Adjuster Amount - +3 - 7 mm Bolster - RL 2,000 X Fb 1,200 Slide - RL 2,000 x Fb 1,100 Foot Pront - RL 2,800 x FB 2,000 Main Motor - 45 Kw / 15 spm Machine Weight - 45000 Kgs

412

ID	MA36986
Make	Verson
Model	S4-1000-120-72
YOM
Condition	Good Condition
Photo	See Photo
Straight Side Presses 5 Presses available with cushion Capacity-1000 Ton Tons Bed 120" x 72" Stroke 24" Shut Height 50" SDAU Adjustment 14" Speed 13-26 SPM

413

ID	MA36985
Make	Verson
Model	S2-400-120-60
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Straight Side Presses 6 Presses available with cushion Capacity - 400 Ton Tons Bed 120" x 60" Stroke 20" Shut Height 50" SDAU Adjustment 10" Speed 13-26 SPM Video on 400Ton as per attached

414

ID	MA36969
Make	AIDA,Japan
Model	NC2-250(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 TONS (spm 20-35) Stroke : 280 mm. Die Hight : 600 mm. Slide Adjustment : 120 mm. Slide Area : 2100 x 700 mm. Bolster Area : 2700 x 920 mm.

415

ID	MA36966
Make	Seyi,Taiwan
Model	SNC60
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity : 60 TONS Stroke : 130 mm.(spm 60) Die Hight : 300 mm.

416

ID	MA36965
Make	Kamatsu,Japan
Model	OB1352
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity : 35 Ton Stroke : 40 mm. Die Hight : 210 mm. Slide Adjustment : 50 mm. Slide Area : 330 x 250 mm. Bolster Area : 700 x 400 x 55 mm.

417

ID	MA36960
Make	Sato,Japan
Model	SCP300C
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 300 TONS Stroke : 200 mm. (spm 30-45) Die Hight : 550 mm. Slide Adjustment : 150 mm. Slide Area : 1000 x 1000 mm. Bolster Area : 1200 x 1200 mm.

418

ID	MA36959
Make	Wasino,Japan
Model	PUX-150-KRC
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity : 150 TONS Stroke : 175 mm.(spm 30-55) Die Hight : 390 mm. Slide Adjustment : 100 mm. Slide Area : 700 x 550 mm

419

ID	MA36958
Make	Amada,Japan
Model	TP150
YOM	1993
Condition	Good Condition
Photo	See Photo
Double Crank Capacity : 150 TONS Stroke : 125 mm.(spm 20-40) Die Hight : 350 mm. Slide Adjustment : 100 mm. Slide Area : 700 x 550 mm.

420

ID	MA36957
Make	Komatsu Japan
Model	OBW200-2
YOM	1987
Condition	Good Condition
Photo	See Photo
Double Crank Capacity : 200 TONS Stroke : 300 (spm 20-40) Die Hight : 475 mm. Slide Adjustment : 120 mm. Slide Area : 1850 x 850 mm Bolster Area : 2400 x 850 x160 mm.

421

ID	MA36956
Make	Komatsu
Model	OBW200-2B
YOM	1991
Condition	Good Condition
Photo	See Photo
Double Crank Capacity : 200 TONS Stroke : 300 mm. (spm 30-50) Die Hight : 475 mm. Slide Adjustment : 120 mm. Slide Area : 1850 x 650 mm. Bolster Area : 2600 x 850 x160 mm

422

ID	MA36955
Make	AIDA,Japan
Model	NC2-200(2)
YOM
Condition	Good Condition
Photo	See Photo
Double Crank Capacity : 200 TONS Stroke : 250 mm. (spm 25-45) Die Hight : 500 mm. Slide Adjustment : 110 mm. Slide Area : 1850 x 650 mm. Bolster Area : 2420 x 840 mm.

423

ID	MI9459
Make	Kaushiko
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY 500 TONS 2000 X 1500 BED SIZE MAX SHUT HEIGHT 750 MM MIN SHUT HEIGHT 700 MM ABOVE BASE 175 MM PIN DIA 38 PITCH STANDARD 150 MM

424

ID	MI9409
Make	AIDA,Japan
Model	PD-STGT-300M
YOM
Condition	Good Condition
Photo	See Photo
H FRAME PREE DOUBLE CRANK PRESS Cap: 300Tons Stroke: 500mm Bed Size: 2130 x 1370mm Ram Size: 1900 x 1200mm Die Height: 650mm Adjustment: 200mm SPM: 16

425

ID	MA36917
Make	AIDA,Japan
Model	CL20
YOM	1988
Condition	Good Condition
Photo	See Photo
cap : 200 t , table 1270 x 840mm . stroke 200mm, adjust 100mm , die cushion : yes

426

ID	MI9284
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) Pneumatic -300 Tons Make : Yashida Shut Height : 500mm Bed Size (LxW) :2700 x 920mm Ram Size (L x W) : 2100 x 700 2) Pneumatic- 200 Tons make : I.W.K Shut height : 370mm Bed Size (LxW) : 1000 x 630mm Ram Size (LxW ) : 750 x 400mm 3) Pneumatic - 200 Tons Make : Aida Shut Height : 405mm Bed Size (LxW) : 1950 x 650mm Ram Size (LxW ) : 1480 x 550mm 4) Pneumatic - 110 Tons Make : Amada Shut Height : 400mm Bed Size (LxW ) : 1070 x 610mm Ram size (LxW) : 430 x 470mm 5) Pneumatic - 110 Tons Make : Godrej Shut Height : 360mm Bed Size (LxW) : 1120 x 710mm Ram Size (LxW ) : 630 x 450mm. 5 machines Available.

427

ID	MA36876
Make	World
Model	JH21
YOM	2017
Condition	Good Condition
Photo	See Photo
C-Frame Fixed Bolster Press Nominal Capacity 1250 KN

428

ID	MA36854
Make	Komatsu Maypress
Model	E1W200
YOM	2002
Condition	Good Condition
Photo	See Photo
Capacity 200ton Stroke 160mm Dai Height 420mm SPM35～70 Slide adjust 120mm Bolster 1200x840　 Slide 850x650

429

ID	MA36845
Make	Nava
Model	G1 600-280-800
YOM	1994
Condition	Good Condition
Photo	See Photo
Frame H FRAME Table - x 1600.0 Table - y 1300.0 Table - width (mm) 1600 Piston rods 1.0 Slide - piston rods 1.0 Slide - stroke - mm 800.0 Slide - stroke (mm) 800 Slide - x 1600.0 Subtype DOUBLE UPRIGHT Slide - speed - approach 400.0 Slide - speed - rising 400.0 Mould mounting - tdc span (mm) 1200.0 Mould mounting - lateral window (mm) 600.0 Die cushion - total strength (ton) 280.0 Slide - speed - working 100% 44.0 External dimension - weight (ton) 72.0 Listing id 355 Electrical components - other infos ORIGINAL WITH PLC Slide - y 1300.0 Die cushion - stroke (mm) 350.0 Travola - depth 1300.0 Electrical components - motor power (kw) 200.0 Working 100% 44.0 Speed - approach 400.0 Rising 400.0 Lateral window 600.0 Sled - push points 1.0 Total strength 280.0 Stroke - mm 800.0 Stroke 350.0 Weight 72.0 Sled - width 1600.0 Motor power 200.0 Sled - depth 1300.0 Tdc span 1200.0 Mold assembly - pms light 1200.0 Mold assembly - side window between the uprights (mm) 600.0 Blank holder cushion - stroke (mm) 350.0 External dimensions - weight (ton) 72.0 Electrical components - more info ORIGINAL WITH PLC Conditions WORKING / WORKING Visible to BRESCIA Accessories / other data SPEED 400-44-400 Push points 1.0

430

ID	MA36844
Make	Danly
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
H Table - x 2800.0 Table - y 1849.0 Table - width (mm) 2800 Slide - piston rods 4.0 Piston rods 4.0 Slide - stroke (mm) 610 Slide - x 1280.0 Slide - registration 510.0 Slide - number of strokes/minute 0>18 Slide - stroke - mm 610.0 Mould mounting - lateral window (mm) OBTAINABLE 1500 Number of strokes / min 0> 18 Die cushion - total strength (ton) 160.0 Listing id 200 Mould mounting - tdc span (mm) 1700.0 Die cushion - stroke (mm) 305.0 External dimension - height (mm) 7500.0 Electrical components - motor power (kw) 100.0 Subtype DOUBLE UPRIGHT Revision DONE External dimension - x (mm) 4500.0 Electrical components - electrical panel conditions - complete inspection YES Travola - depth 1849 External dimension - y (mm) 2500.0 Accessories / other date ELECTRONIC SPEED CONTROL - MOLDS LOCK Slide - y 1849.0 Electrical components - other infos PLC Sled - width 1280 External dimension - weight (ton) 160.0 Registration 510.0 Tdc span 1700.0 Stroke - mm 610.0 Stroke 305.0 Sled - depth 1849 Y 2500.0 Height 7500.0 Lateral window OBTAINABLE 1500 Sled - registration 510 Number of strokes/minute 0>18 X 4500.0 Weight 160.0 Total strength 160.0 Motor power 100.0 Mold assembly - pms light 1700 Mold assembly - side window between the uprights (mm) COLLECTABLE 1500 Blank holder cushion - stroke (mm) 305 External dimensions - width (mm) 4500 External dimensions - depth (mm) 2500 External dimensions - height above ground (mm) 7500 External dimensions - weight (ton) 160 Electrical components - electrical panel condition - overhauled YES Electrical components - more info WITH PLC Visible to TURIN Push points 4Frame

431

ID	MA36842
Make	Rovetta,Italy
Model	Medusa 3
YOM	1985
Condition	Good Condition
Photo	See Photo
Table - width (mm) 1220x1070 Number of strokes / min 15 Subtype (DM / CDC) DM CE mark No Revision 2010 Slide - stroke (mm) 305 Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) Eccentric Slide - width (mm) 1220x1070 Push points 2 Sled - number of guides 8 Slide - adjustment system (guided / ball / wedge) Guided Light pms (mm) 705 Side window between the uprights (mm) 700 Blank holder cushion - total force (ton) 100 Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) Tire Blank holder cushion - stroke (mm) 150 External dimensions - width (mm) 2400 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 4500 Electrical components - No. of motors 2 Motor power (kw) 30 Conections electrical panel (working, missing, overhauled, to be overhauled) working Photocells (front / rear) Rear Safety protections (front / rear) Fronts Overload (hydraulic / mechanical) Plumber Conditions working Slide - registration (mm) 152 Weight (ton) 45 Foundation (cm) Yes

432

ID	MA36841
Make	Radaelli
Model	Delfino 2
YOM	1980
Condition	Good Condition
Photo	See Photo
Frame H FRAME Table - x 2500.0 Table - y 1600.0 Table - width (mm) 2500 Slide - piston rods 2.0 Piston rods 2.0 Slide - stroke - mm 300.0 Slide - x 2500.0 Slide - number of strokes/minute 15.0 Slide - registration 200.0 Slide - stroke (mm) 300 Mould mounting - lateral window (mm) 800.0 Number of strokes / min 15 Die cushion - total strength (ton) 60.0 Mould mounting - tdc span (mm) 1200 External dimension - weight (ton) 42.5 Die cushion - stroke (mm) 170.0 Electrical components - motor power (kw) 30.0 Stroke - mm 300.0 Listing id 169 Slide - y 1200.0 Tdc span 1200 Subtype DOUBLE UPRIGHT Lateral window 800.0 Registration 200.0 Stroke 170.0 Number of strokes/minute 15.0 Total strength 60.0 Weight 42.5 Motor power 30.0 Travola - depth 1600 Sled - push points 2 Sled - width 2500 Sled - depth 1200 Sled - registration 200 Mold assembly - pms light 1200 Blank holder cushion - stroke (mm) 170 Mold assembly - side window between the uprights (mm) 800 External dimensions - weight (ton) 42 Visible to CARMAGNOLA Push points 2 PMS light 1200 Side window between the uprights 800 Running 170

433

ID	MA36833
Make	Rehine
Model	91/A300
YOM	1989
Condition	Good Condition
Photo	See Photo
TECHNICAL MACHINE BENEFITS: - WORKING HEIGHT: 740MM - MAXIMUM OPENING BETWEEN TABLES: 1400MM - MAXIMUM CUSHION FORCE: 80T - MAXIMUM CUSHION PRESSURE: 255BAR - CUSHION STROKE: 500MM - MAXIMUM CUSHION OPENING: 1400MM - MINIMUM CUSHION OPENING: 600MM Outer Length: 1200mm Outer width :700mm Stroke:800mm

434

ID	MA36811
Make	Benelli
Model
YOM
Condition	Good Condition
Photo	See Photo
C Frame Stroke :200mm (variable) Slide Adjustment :150mm Table : 1650 x 960mm Ram :100 x 850mm Light at TCD : 850mm (720mm with Hollow Floor) Height of the working Table :1150mm with overlapping Height :3800 + Cylinders (600mm) Size :Depth :2900mm size : width:1900mm with electrical Panels

435

ID	MA36810
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Stroke :140mm Table Size: 600 x 500mm 2 machines

436

ID	MA36809
Make	Komatsu Maypress
Model
YOM
Condition	Good Condition
Photo	See Photo
Stroke :90mm Table size : 600 x 500mm 2 machines

437

ID	MA36725
Make	Benelli
Model	PE2M
YOM
Condition	Good Condition
Photo	See Photo
Length :3900mm Width :2500mm Height :6000mm Pressure Capacity :600 Tons Table Dimension: 2550 x 1700mm Die Installation Area : 2500 x 1700mm Stroke :320mm Slide Adjustment: 150mm Shut height : 1200mm No of Connecting Rods : 4 Rods Machine with 5 Cushions

438

ID	MA36719
Make	Seyi,Taiwan
Model	HSD-550
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity - 550 ton Bed area 122"x61" Stroke length 12" Shut Height 30" over bolster Adjustment 10" Strokes per minute 25-50 Windows 47" Wintriss SmartPAC PRO Control Wintriss DSI-2 Die Protection Shadow 9 Safety Light Curtains 8" T-Slotted Bolster Pacesetter Systems Die Lifter Controller Scrap Tray Shaker Unit LSP Industries Die Lubricator 75HP Main Motor

439

ID	MI9165
Make	AIDA
Model
YOM
Condition
Photo	See Photo
Capacity,-110 ton

440

ID	MA36680
Make	Bliss
Model	SE2-300-84-48
YOM
Condition	Good Condition
Photo	See Photo
Straight Side Press Floor Standing Capacity - 300Ton 16" Stroke 40" Shut Height (S.D.A.U. to Top of Bolster) 10" Adjustment 84" x 48" Bed & Slide Area 20-40 SPM Variable Press Controls Wintriss DiPro 1500 RexCon Loadgard Operator T-Stand 34" W x 24" H Windows 8" Thick T-Slotted Bolster

441

ID	MA36677
Make	AIDA,Japan
Model	NC1-20
YOM	1993
Condition	Good Condition
Photo	See Photo
Press Capacity : 200 ton Stroke length : 250 mm Stroke per minute : 25-45 s.p.m Die height : 450 mm Slide adjustment : 110 mm Slide area : 880x650 mm Bolster area : 1390x840 mm Motor power : 15 kW

442

ID	MA36661
Make	AIDA
Model	MSP3000-270
YOM	2011
Condition	Good Condition
Photo	See Photo
Capacity - 330 Ton HIGH SPEED PRESS Stroke Length: 1.18" Strokes Per Minute: 100-400 SPM Shut Height: 23.62" Bed Area: 106.3" x 39.37" Slide Area: 106.3" x 31.5" Slide Adjustment: 2.36" Required Air Pressure: 73 PSI Max Upper Die Weight: 5070 lbs. EQUIPPED WITH: Air Conditioned Sound Enclosure Vamco Quantum 400-HS Coil Line VAMCO QUANTUM 400-HS COIL LINE SPECIFICATIONS: Material Width: 2" � 15.75" Material Thickness: 24 gauge Feed Length: 0 - 15.75" Height Of Feed Line: 15.35" +/- 1.18"

443

ID	MA36652
Make	SIMPAC
Model	SV4P-1600-01
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
Capacity -1600 Ton Stroke Length -700 mm Stroke per Minute 1-20 SPM Die Height - 1500 mm Slide Adjust - 600 mm Slide Area (LR x FB) - 4800 x 2600mm Bolster Area (LR x FB) - 4800 x 2600mm Bolster Thickness -300 mm Main Motor - 225 x 4EA Kw Adjust Motor - KW x P 11 x6 Voltage - 440 x 60 V x Hz Rated Current - 740 A Die Cusion Capacity - 260Ton Stroke - 350 mm Pad Area (LR x FB) - 4000 x 2000 mm Adjust Motor -2.2 x 6 KW x P

444

ID	MA36639
Make	Erfurt
Model	PKZZ800
YOM
Condition	Good Condition
Photo	See Photo
Table size: 3170mm x 1620mm Ram stroke: 500mm Strokes per minute: 14 Distance between Columns : 3150mm maximum distance between Table & slider: 1050mm Ram Dimension: 3100mm x 1600mm slider stroke:500mm Motor Capacity:90KW Press weight: 130.000 kgs

445

ID	MI9031
Make	Minchang
Model	CD250
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 TON STROKE : 220MM SLIDE ADJ : 120MM DIE HEIGHT : 500MM SIDE AREA : 2000 X 645 MM BLOSTER AREA : 2400 X 820MM

446

ID	MI9030
Make	Kukil
Model	E2P400-2
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 400 TON STROKE : 250MM STROKE / MINUTE : 25-30 SPM DIE HEIGHT : 800MM SIDE AREA : 2700 X 1200MM BOLSTER AREA : 2700 X 1200MM SIDE ADJ : 140MM

447

ID	MA36581
Make	Yangli
Model	JH21
YOM	2017/2018
Condition	Good Condition
Photo	See Photo
Punching Machine Capacity - 125 Tons Table plate: 1150x680 Slider: 655x500 Maximum height: 350 Stroke: 160

448

ID	MA36580
Make	World
Model
YOM	2017/2018
Condition	Good Condition
Photo	See Photo
Punching Machine Capacity - 80 Ton Table plate: 1000x600 Slider: 560x420 Maximum heigh: 320 Stroke: 140

449

ID	MA36579
Make	World
Model
YOM	2017/2018
Condition	Good Condition
Photo	See Photo
Punching Machine Capacity - 60 Ton Table plate: 960-520 Slider: 480-400 Maximum height: 300 Stroke: 120

450

ID	MA36572
Make	Dreis&Krump
Model	SS-100-48-120
YOM
Condition	Good Condition
Photo	See Photo
Capacity -100 Ton STRAIGHT SIDE DOUBLE CRANK PRESS Bed size: 120" x 48" Stroke: 6"

451

ID	MI9000
Make	AIDA,Japan
Model	K-Z5
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 250 Ton Stroke Length:140mm Stroke per minute:50 Bolster Area:600 x 500mm Slide Area: 500 x 400mm Die Height:250mm Slide Adjustment: 15mm Bolster Thickness: 100mm Knockout capacity: 8mm Knockout stroke length: 10mm

452

ID	MI8998
Make	AIDA,Japan
Model	PD-ST-GT-300M
YOM
Condition	Good Condition
Photo	See Photo
'H' Frame Double Crank Press Capacity - 300Ton Stroke: 500mm Bed: 2130 X 1370mm Ram: 1900 X1200mm Die Height: 650mm Adjustment: 200mm SPM: 16 Main Motor:22KW With Die Cushion.

453

ID	MI8996
Make	Erfurt
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 315 TON BOLSTER:2500 X 1250 DAYLIGHT:1200 MM STROKE:400

454

ID	MA36562
Make	Hitachi,Zosen
Model	SL4-1000-400-200
YOM	1987
Condition	Good Condition
Photo	See Photo
Single Action Press Capacity -1000 Tons Link Motion Bed - 160" x 87" (4000mm x 2200mm) Stroke - 29.5" (750mm) Strokes per minute - 12-22 (Variable) Windows Rolling Bolster (left-to-right direction)

455

ID	MA36561
Make	Hitachi,Zosen
Model	SL4-1400-400-200
YOM	1987
Condition	Good Condition
Photo	See Photo
Single Action Press Capacity -1400 Ton Link Motion Bed - 160" x 87" (4000mm x 2200mm) Stroke - 29.5" (750mm) Strokes per minute -12-22 (Variable) Windows Rolling Bolster (left-to-right direction)

456

ID	MI8955
Make	Komatsu
Model	g4d-900-600
YOM	1984
Condition	Good Condition
Photo	See Photo \| See Video
Top Drive Stroke:990mm Shut height:1955mm Adjustment :550mm Bed Area: 4580 x 2440mm Die Cushion: 75T x2 = 150T SPM :8 Equipped with Motor & Controls air clutch & Brake,Air counter balance, air & lube system, Gordon brake monitor,Trabon dm 3000, maxi monitor,mark 3 lube system new electrical Moving Bolster

457

ID	MI8954
Make	Pels-Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Bed Size: 900mm x 1100mm

458

ID	MA36525
Make	OFB
Model
YOM
Condition	Complete,working condition
Photo	See Photo \| See Video
"Number of conrods 1 Table dimensions X-Y 1250 x 700 Slide dimensions (x-y) 850x600 Stroke 24 Second value of the stroke 180 Adjustment slide 100 mm Light at tdc 680 Strokes/min 50 Accessories hydraulic overload Weight 13 Front 1600 Deep 1900 Height 3600C" Frame

459

ID	MA36493
Make	Erfurt
Model	PZ-500-2,8x1,5
YOM	1982
Condition	Good Condition
Photo	See Photo
Capacity -500 Ton Table - x (mm) 2800 Slide - stroke (mm) 500 Table - width (mm) 2800 Number of strokes/minute 20 Frame (H/C) H FRAME Inspection 2012 Conditions WORKING Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) ECCENTRIC Table - y (mm) 1500 Slide - y (mm) 1500 Slide - adjustable stroke (mm) 500 Slide - registration (mm) 200 Piston rods 2 Slide - number of guides 6 Slide - adjustament system (guided/sphere/wedge) GUIDED Tdc span (mm) 1400 Front span between the pillars (mm) 2900 Lateral window (mm) 800 Die cushion - total strength (ton) 100 Slide - x (mm) 2800 Number of strokes / min 20 Subtype (DM / CDC) DOUBLE UPRIGHT Die cushion - stroke (mm) 200 External dimensions - X (mm) 4000 External dimensions - Y (mm) 2000 External dimensions - height (mm) 7300 Weight (ton) 70 Foundation (cm) 200 Electrical components - number of motors 3 Motor power (kW) 55 Electrical panel conditions (working/missing/complete inspection/inspection required) WORKING Light barriers (frontal/posterior) FRONTAL AND POSTERIOR Electrical components - other infos NEW ELECTRICAL PANEL (2015) Revision 2012 Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly) ECCENTRIC Table - depth (mm) 1500 Slide - width (mm) 2800 Slide - depth (mm) 1500 Overload (hydraulic/mechanical) MECHANICAL Push points 2 Sled - number of guides 6 Slide - adjustment system (guided / ball / wedge) GUIDED Light pms (mm) 1400 Front gap between uprights (mm) 2900 Side window between the uprights (mm) 800 Blank holder cushion - total force (ton) 100 Blank holder cushion - stroke (mm) 200 External dimensions - width (mm) 4000 External dimensions - depth (mm) 2000 External dimensions - height above ground (mm) 7300 Motor power (kw) 55 Conections electrical panel (working, missing, overhauled, to be overhauled) WORKING Electrical components - No. of motors 3 Photocells (front / rear) FRONT AND REAR Electrical components - more info NEW ELECTRICAL PANEL (2015) Overload (hydraulic / mechanical) MECHANIC

460

ID	MA36492
Make	Erfurt
Model	PKZZIV500.1FS
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity -500 Ton Frame H FRAME Inspection 2010 Table - x 2800 Table - y 1500 Table - extractable - frontal YES Slide - piston rods 2 Table - width (mm) 2800 Extractable - frontal YES Slide - stroke - mm 500 Piston rods 2 Slide - registration 500 Slide - stroke (mm) 500 Slide - number of strokes/minute 20 Die cushion - total strength (ton) 100 Number of strokes / min 20 External dimension - x (mm) 4000 Mould mounting - tdc span (mm) 1620 Mould mounting - lateral window (mm) 1600 External dimension - y (mm) 2500 External dimension - height (mm) 7000 Subtype DOUBLE UPRIGHT Die cushion - stroke (mm) 250 Revision 2010 Slide - x 2800 Travola - depth 1500 External dimension - weight (ton) 90 Electrical components - motor power (kw) 50 Stroke - mm 500 Slide - y 1500 Total strength 100 Travola - removable - front YES Tdc span 1620 Registration 500 Number of strokes/minute 20 Sled - push points 2 Lateral window 1600 X 4000 Sled - width 2800 Sled - depth 1500 Sled - registration 500 Y 2500 Stroke 250 Height 7000 Weight 90 Motor power 50 Sled - number of strokes / min 20 Mold assembly - pms light 1620 Mold assembly - side window between the uprights (mm) 1600 Blank holder cushion - stroke (mm) 250 External dimensions - depth (mm) 2500 External dimensions - height above ground (mm) 7000 External dimensions - weight (ton) 90 Width 4000 Depth 2500 Push points 2 External dimensions - width (mm) 4000 Mm 500 PMS light 1620 Side window between the uprights 1600 Running 250 Height above ground 7000

461

ID	MA36466
Make	Minster
Model	P2H-63-39
YOM
Condition	Good Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity -75 Ton Bed Size: 39.4� l-r x 24.8� f-b Stroke: 1.97� Adjustment: 2.95� Speed: 400 SPM Windows: 14� wide x 17� high Equipped with: Livonia Magnetic Scrap Conveyor Minster Clutch and Brake Control

462

ID	MA36465
Make	AIDA
Model	PMX-22-3000(1)215-100
YOM	2003
Condition	Good Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity -330 Ton 7.87" STROKE 3.94" POWER RAM ADJUSTMENT 21.65 SHUT HEIGHT OVER BOLSTER 40-100 SPM 84.6" LR X 39.4" FB BED 84.6" LR X 39.4" RF RAM LINK DRIVE AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES HYDRAULIC OVERLOADS FLOOR STANDING WINTRESS SMART PAC 2 CONTROL 50 HP

463

ID	MA36464
Make	Minster
Model	PM3-125
YOM
Condition	Good Condition
Photo	See Photo
Presses, High Speed Production Capacity - 125 Ton 1.18" STROKE .2" RAM ADJUSTMENT 22.85" SHUT HEIGHT 190-600 SPM 48" X 32" BED 15" WINDOW PALM BUTTONS HYDRAULIC ADJUSTMENT LOCKUP T SLOTS RAM AND BOLSTER 112" X 65" X 172"T 53,000 LBS APROX

464

ID	MA36463
Make	Brown & Boggs
Model	SS2-600-120-60
YOM	1998
Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity - 600 Ton 12" STROKE 12" POWERED RAM ADJUSTMENT 22" SHUT HEIGHT TO TOP OF BOLSTER 25 -50 SPM 120" x 60" BED 120" x 60" RAM 40" WINDOWS 9" T SLOTTED BOLSTER FLOOR STANDING AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES PALM BUTTONS 100 HP 230/460/60/3 171"LR x 100" FB X 253" TALL WEIGHT 200,000#

465

ID	MA36462
Make	Minster
Model	E2-300-72-42
YOM	1969
Condition	Good Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity - 300 Ton 8" STROKE 6" SLIDE ADJUSTMENT 29" SHUT HEIGHT 72" X 42" BED SIZE 50 TO 100 STROKES PER MINUTE AIR COUNTER BALANCE SCRAP CONVEYOR WORK PLATFORM WINTRISS PRESS CONTROL

466

ID	MA36461
Make	AIDA
Model	HMX-2000M
YOM	2007
Condition	Good Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity -220 Ton 30mm STROKE 1.18" 60mm RAMM ADJUSTMENT 2.36" 390mm SHUT HEIGHT 15.33" 200-600 SPM 1700mm X 650mm RAM 66.92" X 25.59" 1700mm X 950mm BED 66.92" X 37.4" WINDOWS PALM BUTTONS HYDRAULIC OVERLOADS DIE CLAMPING

467

ID	MA36460
Make	Minster
Model	E2-600-96-48
YOM
Condition	Good Condition
Photo	See Photo
Presses Straight side, Double Crank (Single Action) Capacity - 600 Ton 8" STROKE 6" SLIDE ADJUSTMENT 96" X 48" BED SIZE 31" SHUT HEIGHT 25" WINDOWS FLOOR STANDING 30 TO 60 STROKES PER MINUTE AIR COUNTER BALANCE SCRAP CONVEYOR WORK PLATFORM WINTRISS PRESS CONTROL

468

ID	MA36420
Make	Shimomura
Model	DCLP300-20B
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 300 Ton Stroke 300 mm SPM 16 Bolster 2000 x 1300 mm Slide 1850 x 1000 mm Adjust 150 mm Die Height 650 mm Open Height 950 mm Die Cushion 50 Ton Cushion Stroke 160 mm Cushion Pad 1000 x 600 mm Qty : 3Nos

469

ID	MA36413
Make	Radaelli
Model
YOM
Condition	Good Condition
Photo	See Photo
Power : 350Ton Number of conrod : 2 Table Dimensions : 2500mm x 1600mm Slide Dimensions : 2500mm x 1200mm Stroke : 280mm Slide Adjustment : 200mm Light at T.D.C. : 1080mm Stroke Per Minute : Da 20 A 28 Lateral Window Dimensions : 800mm Weight : 42ton

470

ID	MA36412
Make	Agostino Colombo
Model
YOM
Condition	Good Condition
Photo	See Photo
Power : 200 Table Dimension : 1120 x 900mm Stroke : 250mm Light At T.D.C. : 800mm

471

ID	MA36411
Make	Omera
Model
YOM
Condition	Good Condition
Photo	See Photo
Power : 200Ton Number of Conrods : 2 Table Dimensions : 1600 x 900 Slide Dimension : 1400 x 900 Stroke : 150mm Light at TDC : 600mm Stroke per minute : Da 20 A40 Lateral window dimensions : 540mm Height : 4600mm Front : 2700mm Deep : 1300mm

472

ID	MI8839
Make	Howa Sangyo,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Die Height: 160mm Stroke length:320mm Table Size:350 x 700mm

473

ID	MI8838
Make	Iwai
Model
YOM
Condition	Good Condition
Photo	See Photo
Table Size:540 x 460mm Stroke length:80mm

474

ID	MA36408
Make	Verson
Model	S2-800-84-72T
YOM
Condition	Good Condition
Photo	See Photo
Capacity 800 ton Bed area 84"x72" Stroke length 12" Shut height 40.5" Slide adjustment (powered) 10" Strokes per minute 30 Window size 56" Additional Features Air Clutch and Brake Air Counterbalances 75 hp Main Motor 10.5" T-Slotted Bolster Overall Weight: 210,000lbs.

475

ID	MA36407
Make	Danly
Model	S2-500-84-60
YOM
Condition	Good Condition
Photo	See Photo
Capacity 500 ton Bed area 84"x60" Stroke length 18" Shut Height 44" Adjustment 20" Strokes per minute 20 SPM Additional Features Floor Standing Allen Bradley Controls Air Cushions - 80 ton @ 100psi 60HP Main Motor

476

ID	MA36406
Make	Clearing-Niagara
Model	SC2-330-84-60
YOM	1997
Condition	Good Condition
Photo	See Photo
Capacity 330 ton Bed area 84"x60" Stroke 18" Shut height (sdau) over bed 36" Strokes per minute 20-40 Window size 55" Additional Features Floor Standing

477

ID	MA36405
Make	Komatsu
Model	E2P500
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity 550 ton Bed area 3000mm x 1300mm (118.11" x 51.18") Stroke length 300mm (11.81") Die Height 840mm (33.07") Adjustment 250mm (9.84") Strokes per minute 20-40 SPM Windows 48" Additional Features 8.5" T-Slotted Bolster T-Stand Palm Control Load Monitor

478

ID	MA36404
Make	Niagara
Model	SE2-200-72-42
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity 220 ton Bed area 72"x42" Stroke length 6" Shut height (sdau) 28" Slide adjustment (powered) 9" Strokes per minute 40-100 Windows (opening in side columns) 24" Additional Features Shadow Safety Light Curtains T-Slotted Bolster and Slide Floor Standing Vibro Press Mounts 15'6" Overall Height

479

ID	MA36403
Make	Minster
Model	E2-200-84-48
YOM
Condition	Good Condition
Photo	See Photo
Capacity 200 ton Bed area 84"x48" Stroke length 12" Shut height 31" Slide adjustment (powered) 10" Strokes per minute 20-40 Windows (opening in side columns) 25" Additional Features PressCam 8 Control T-Palm Stand 7" T-Slotted Bolster Overall Height: 15' 7" (floor standing)

480

ID	MA36402
Make	Niagara
Model	LE4-1500-186-108
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY: 1500 TON BED AREA: 186"x108" STROKE: 20" SHUT HEIGHT: 48.5" (over bolster) SLIDE ADJUSTMENT: 4" STROKES PER MINUTE: 10-40 Equipped with: SESCo Coil Feed Line

481

ID	MA36401
Make	L&J
Model	G40-2-48
YOM
Condition	Good Condition
Photo	See Photo
40 TON L&J 2-POINT OPEN BACK GAP-FRAME PRESS Capacity - 40 TON Stroke Length . 4" Shut Height to Bed,SDAU . 14" Ram Adjustment . 2" Bed Area, L-R x F-B . 48" x 18" Opening In Bed, L-R x F-B . 30" x 6" Strokes Per Minute . 120 SPM Weight Approximately . 13000 LBS EQUIPPED WITH: Air Clutch & Brake Light Curtains Feed Conveyor

482

ID	MA36400
Make	Federal
Model	2-45-48-21
YOM
Condition	Good Condition
Photo	See Photo
45 TON FEDERAL 2-POINT OPEN BACK GAP-FRAME PRESS Capacity . 45 TON Stroke Length . 3" Shut Height to Bed,SDAU . 11" Ram Adjustment . 2" Throat Depth . 11.5" Bed Area, L-R x F-B . 48" x 21" Strokes Per Minute . 120 SPM EQUIPPED WITH: Air Clutch & Brake Light Curtains Feed Conveyor

483

ID	MI8837
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Die Height:320mm Stroke Length:160mm Table size:600 x 950mm

484

ID	MI8836
Make	AAA-Auto
Model
YOM
Condition	Good Condition
Photo	See Photo
Die Height:300mm Stroke Length:140mm Table size:500 x 850mm

485

ID	MA36397
Make	IMV,Italy
Model	DF20CL
YOM
Condition	Good Condition
Photo	See Photo
Nominal Power 200 ton Stroke 175 mm Stroke par minute 30-90 Dimension table 1250 x 900 mm Point dead centre 400 mm Adjustment 100 mm Lateral passage 550 mm Hydraulic Safety ELECTRONIC FEEDER CAMU model 400/80 Year 1998 CE Marked Dati Tecnici Modello DF20CL Tipo Pressa Meccanica H Frame Potenza nominale 200 ton Corsa 175 mm Colpi al minuto 30-90 Dimensione tavola 1250 x 900 mm Punto morto inferiore PMI 400 mm Regolazione 100 mm Passaggio laterale 550 mm Sicurezza Idraulica ALIMENTATORE ELETTRONICO CAMU modello 400/80 ANNO 1998 Marcatura CE

486

ID	MA36345
Make	Muller
Model	ZS-2200-40
YOM	1989
Condition	Good Condition
Photo	See Photo
PRESS LINE: C (Tandem Line) Press: C1 Capacity of inner slide(12.7mm before BDC):14000 KN Capacity of Outer slide: 8000KN Capacity of bed cushion: NiL stroke of inner slide:1050mm stroke of outer slide: 900mm stroke of cushion: nil Adjustability of inner slide(Motor): 450mm Adjustability of outer slide(motor) : 450mm Adjustability of cushion: Nil Cycles per minute: 8-16min Operating motor: 230kw Dimension of inner slide:3200 x 1650mm Dimension of innner slide adapter plate(100mm):3200x1650 Dimension of outer slide:4600 x 2200 dimension of outer slide adapter plate(existing)(150):4000 x2200 Dimension of bolster plate(mm):4000x2200 Max shut height bolster plate-inner slide,SDAU : 2150mm Minshut height bolster plate-inner slide,SDAD :1700mm Max shut height bolster plate-adapter plate inner slide(100mm) SDAU:2050mm Min shut height bolster plate-adapter plate inner slide(100mm) SDAD:1600mm Max shut height bolster plate-outer slide,SDAU: 1900mm Min shut height bolster plate-outer slide,SDAD: 1450mm Max shut height bolster plate-adapter plate outer slide(150mm) SDAU:1750mm Min shut height bolster plate-adapter plate outer slide (150mm) SDAD:1300mm Die height standard :1150mm shut height standard(Includes riser plate of 580mm) :1730mm PRESS: C2 - C5 Capacity of Press:8000KN Stroke of slide:660.4mm Adjustability of slide(by motor):381mm Dimension of slide:3962x2134mm Dimension of bolster plate: 3962x2134mm Cycles per minute:10-15 min Operating motor:92kw Capacity of Bed cushions:500+500+500KN Stroke of Bed Cushions: 228.6mm Adjustability of bed cushions: 25-228.6mm Max shut height bolster plate-slide,SDAU:1336.8mm Min shut height bolster plate-slide,SDAD:955.8mm Max shut height bolster plate-adapter plate side(101.6mm) SDAU:2050mm Min shut height bolster plate-adapter plate side (101.6mm) SDAD:1600mm Die height standard:1150mm Diamter of knock out pins:32mm

487

ID	MA36304
Make	Arisa
Model	SC250S
YOM	1981
Condition	Good Condition
Photo	See Photo
Straight Sided Press Nominal force: 2500 kn at 6,6mm from LCD Variable stroking rate: 30 to 90 str/min Die height: 550 at stroke 200 Variable motorized stroke: 25 to 200 mm Manual adjustment: 125 mm Table: 1075 x 1050 mm Ram: 900 x 900 mm Distance between uprights: 1095 mm Motor: 35 kw Dimensions: 2070 x 2800 mm Weight: 25T Blank holder: 25T Cushion stroke: 125 mm Opening in uprights: 600 x 440 mm * 1 connecting rod * with decoiler AB Industries

488

ID	MA36300
Make	Raskin
Model	Star2512SR
YOM
Condition
Photo	See Photo
Straight Sided Press Capacity: 250T Variable stroking rate: 35 to 70 str/min Shut height (stroke down, adjustment in, with false table ep.175mm): 625 mm Fixed stroke: 180 mm Motorized adjustment: 100 mm False table area: 1100 x 1220 mm Hole in ttable: 690 x 890 mm Blank holder 25t � stroke 100mm Weight: 35T ❖2 rods ❖Hydraulic fuse on each rod ❖Bottom pneumatic cushion

489

ID	MA36297
Make	Danly
Model	554-1000-120-96
YOM
Condition	Good Condition
Photo	See Photo
DANLY 1000 Ton four point press Capacity -------- 1000 Tons Bed: 120 x 96" (3000 x 2400) Shut height -------------- 45" Adjustment -------------- 10" Stroke length ------------ 16" Stroke per/min ---------- 12 No of Cushion 2 and capacity 138 Ton each @ 100 PSI. Cushion stroke: 8� Bed opening: 105� x 75� Weight approx : 223 Tons

490

ID	MA36270
Make	Bliss
Model	SE2-600-120-60
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Straight Side Press Capacity -600 Ton Bed: 120 x 60" (3000 x 1500) Shut height -------��- 34" Adjustment ----------�� 16" Stroke length ------------ 18" Stroke per/min ---------- 20 No of Cushion 3, Stroke 9" Cushion capacity 35.3 Ton Each @ 100 psi

491

ID	MA36269
Make	Minster
Model	E2-1200
YOM	2011
Condition	Good Condition
Photo	See Photo
Straight Side Press Capacity -1200 Ton 12" Stroke 44" Shut Height (SDAU) 12" Slide Adjustment 120" LR x 60" FB Bolster 25-45 SPM Variable 10.8" bolster plate Air Clutch & Brake Hydraulic overload protection 63"(1600mm) wide windows Automatic counter balance adjustment Mechanical Bed Knockout system Slide knock out cylinders Bed Draw cushion Adjustable die safety blocks Wayne Trails Transfer feed (4) Vibro-Dynamics Isolator mounts Press is pit mounted Complete sound enclosure

492

ID	MA36266
Make	Kieserling
Model	SKPN800/2000
YOM	1970
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - 800Ton pressure 800 t distance between columns 2000 mm stroke 600 mm table-size 1800 x 1400 mm ram surface 1800 x 1400 mm distance table/ram min/max. 400/800 mm ram adjustment 400 mm no. of strokes 14 - 20 Hub/min die cushion capacity table 80 t 32 t total power requirement 135 kW weight of the machine ca. 136 t dimension of the press 3,20 x 1,60 x 9,20 m equipped with: - decoiler make SCHLEICHER, model HE-225-1500, YOM 1988, max. weight of coil 10 t, sheet width 300 � 1300 mm, sheet thickness 0,8 � 2,5 mm - combined straightening and feed device, max. sheet width 1200 mm

493

ID	MA36258
Make	Verson
Model	TS2-2000-96-48T
YOM	1962
Condition	Good Condition
Photo	See Photo
Capacity: 2000 Ton Stroke: 14� Shut Height: 48� Adjustment: 8� Bed & Slide Area: 96� L-R x 48� F-B Bolster Area: 96� L-R x 60� F-B x 10� Thisck Speed: 27 SPM Wimdows: 65� Wide Equipped With: Air Clutch & Brake Air Counterbalances T-Slotted Bolster & Slide Verson Inch/Single/Continuous Control Press Cam 8 Automation Controller

494

ID	MA36250
Make	Komatsu
Model	LS4 1200-34-20-MF D
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 800 Ton Die Height Out Max Max 1620 MIN 1220 Size (FR x LR) out 2000 x 3400 Bolster 2000 x 3400 Slide Stroke out 750 Bolster Thickness 280 Main Motor 440V, 95KW UP Right Distance 3500 Working Height 750 Upright Distance 3500 Working Height 750 Upright opening (MB Side) 2300 Stroke 300 pad type same type Die Cushion Hight bolster (PIN) pad size (FR x LR) 1310 x 2830 Capacity 100Ton slide adjust 400 Bolster No.2 MB Bolster side SPM 10~20 Maximum capacity point Bottom dead center above 15

495

ID	MA36237
Make	Verson
Model	S4-800-156-84
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity - 800Ton Bed-156" x 84" (3962mm x 2134mm) Stroke- 26" (660mm) Strokes per minute - 10-15(Variable) Shut Height - 52,5" (1336mm) (SADU) Adjustment - 15" (380mm) Cushions (500 Tons each, 1-9" stroke) Blank loader and press to press automation also available may be inspected in the plant

496

ID	MA36236
Make	Verson
Model	SE4-900-4572-2438
YOM	1980
Condition	Good Condition
Photo	See Photo
Straight Side Presses Capacity - 1000 Ton Bed Area - 180" x 96" Slide Area -180" x 96" Stroke-37" Shut Height - 55" Adjustment - 30" Speed - 16 spm Notes: _Side Loading Bolster _(3) Cushions each press _Cushion Capacity: 120 Tons EQUIPPED WITH: Side Moving Bolster (3) Cushions Cushion Capacity: 120 Tons SPECIFICATIONS: TONNAGE 1,000 T STROKE 37" SHUT HEIGHT 55" ADJUSTMENT 30 in SPM 16 strokes/min. BED L 180" BED W 96"

497

ID	MA36233
Make	KMC
Model	KLM600P2
YOM	2012
Condition	Good Condition
Photo	See Photo
Capacity - 600Ton S-350, D-950 B-2300 x 1300 QDC DIE LIFTER GUIDE ROLLER TOTAL WEIGHT 135 TON LENGTH 7500MM WIDTH 4900 MM HEIGHT 4000 MM CBM 147 (SAFETY COVERS, MOTOR, WHEEL BELT)

498

ID	MA36228
Make	Verson
Model	f60
YOM
Condition	Good Condition
Photo	See Photo
capacity tonnes: 300 stroke:200mm stroke per minute: 20-60 shut height : 680mm ram adjustment: 200mm Bolster size: LR:1500 FB: 1500

499

ID	MA36223
Make	Zani
Model
YOM	1992
Condition	Under power
Photo	See Photo
Capacity - 600 Ton Number of conrods -2 Table dimensions ( x-y/mm) 3000 X 1600 Slide Dimensions X-Y (mm) 3000 X 1600 Stroke (mm) 500 Slide Adjustment (mm) 200 Light at T.D.C.*(mm) 2000 Stroke per minute 20

500

ID	MA36222
Make	Zani
Model
YOM	1992
Condition	Under power
Photo	See Photo
Capacity - 400 Ton Number of conrods - 2 Table dimensions ( x-y/mm) 3000 x 1600 Slide Dimensions X-Y (mm) 3000 x 1600 Stroke (mm) 500 Slide Adjustment (mm) 150 Light at T.D.C.*(mm) 1500 Stroke per minute 20 Type of security Hydraulic Overload

501

ID	MA36221
Make	Mecfond
Model
YOM	1995
Condition	Under power
Photo	See Photo
Capacity - 800 Ton Number of conrods -4 Table dimensions ( x-y/mm) 3000 x 2000 Slide Dimensions X-Y (mm) 3000 x 2000 Stroke (mm) 510 Slide Adjustment (mm) 375 Light at T.D.C.*(mm) 1628 Stroke per minute 25 Accessories Hydraulic Overload

502

ID	MA36219
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 400 Ton MECHANICAL PRESS C NODY FRAME 400 T

503

ID	MA36213
Make	Colombo
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 50 TON FRONT PNEUMATIC FRICTION PRESS ADJUSTABLE STROKE FROM 20 TO 200 LIGHT ALL OPEN 450 700X450 TOP STICK BALANCE CYLINDERS DOUBLE BODY SOLENOID VALVE ORIGINAL ELECTRIC PANEL OVERALL SIZE 1000 X 1300 X H2400, WEIGHT 4500 KG

504

ID	MA36212
Make	Russian
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -100 Ton BACK GEARED

505

ID	MA36211
Make	Contak
Model	PGR/160T
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 160Ton Pneumatic clutch, motorized 4-guide hammer automatic lubrication, Solenoid valve Double body, Machine with double table 16 hp engine, 50 strokes per minute Adjustable stroke 30-150, Floor 1050x660 MATT TOP 590X790 WITH COLLECTOR OIL, fully open light 600 Replaced gaskets on the 2 cylinders balancers Applied 4+4 plates to the clutch Clutch checked and cleaned, fine Working WITH BLANK HOLDER Dimensions 1500 x 1800 x H 3200, Weight 13.000 kgs

506

ID	MA36210
Make	OTI
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 TON OTI FRONT SWAN NECK PRESS 250 TON WITH PNEUMATIC CLUTCH INTERNAL CLUTCH, MAT 644 RACE 200 SHOTS 20 MATT ADJUSTMENT100 CV20 TABLE 770X1100 MATT TOP 500X800 LIGHT ALL OPEN 620 MOTORIZED HAMMER WITH OIL FITTING AUTOMATIC LUBRICATION WITH BALANCING CYLINDERS DIMENSIONS 2150X1650X H3400INCLUDING CYLINDERS, WEIGHT 160 Q

507

ID	MA36209
Make	Cerini
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY - 250 TON WITH PNEUMATIC FRICTION, GOOSENECK ADJUSTABLE STROKE FROM 20 TO 220MM, LUBRICATION AUTOMATIC, MOTORIZED HAMMER ADJUSTMENT BASE TOP 1500X950 WITH HOLE DIAM.310 CLUTCH TOP OF ____, HOLE FOR SHANK DIAM.60 + 6 HOLES FOR MOLD FIXING + 2 T-SLOTS FULLY OPEN LIGHT 570+100, MACHINE WITH OVERLAY THICKNESS 100 SAFETY MICROPHONE ON THE VITONE STROKE PASSAGE BETWEEN THE SHOULDERS 480, DISTANCE FROM THE SHOULDER TO THE SHAFT 500, 28HP ENGINE, ABOUT 35 STROKE PER MINUTE DOUBLE RETURN GEARS IN OIL BATH It can WORK WITH IMPULSES OR SINGLE OR CONTINUOUS STROKE MACHINE EQUIPPED WITH USE AND MAINTENANCE BOOK. DIMENSIONS 1700 X 2270 X H 3350+ENGINE 500, WEIGHT 19 TON,

508

ID	MA36208
Make	Agostino Colombo
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY -80 TON PNEUMATIC CLUTCH NEW DUAL ELECTROVALVE 4 GUIDES RAM MACHINE PREPARED IN ADVANCE WITH BLANK HOLDER EXTRACTOR ADJUSTABLE STROKE 15-140 STEEL MACHINE AT DOUBLE RETURN STROKE 40 APPROXIMATELY 1000X600 TABLE,ALL OPEN LIGHT 430 MEASURES 1300X1600XH 2730 WEIGHT 60 Q

509

ID	MI8455
Make	Weingarten
Model	1000
YOM
Condition	Good Condition
Photo	See Photo
Weingarten Bolster, Size- 4500 x 2200 mm, Slide Area- 4500 x2200 mm, Shut hight Max- 1180 mm, Slide Adjustment -350 mm, Slide stroke -850 mm Min- 830 mm, Bolster Thickness-300 mm, Bolster height from flower-410 mm, Cushion stroke-300 mm Stamping as well embossing upto 225 mm

510

ID	MA36194
Make	Manzoni
Model	MR2
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity : 630 TON Table size: 2,950 x 1,200 mm Slide size: 2 850 X 1,200 mm Front passage: 2,850mm/3,100mm under gib Side passage: 1,670 mm Slide registration: 250 mm Strokes per min.: 10-30 c/min. Stroke : 450mm Mold clearance at PMI: 950 mm Main motor power: 90 kW Hydraulic safety: present Weight: 132 tons.

511

ID	MA36150
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
WEINGARTEN PNEUMATIC FRICTION PRESS 75 TON STROKE 10-130, SOLENOID VALVE 2 BODY LOWER MOBILE TOP OF 800X600, ALL OPEN LIGHT MAX 700 OVERALL SIZE 1500X1200XH 2500 , WEIGHT 60 Q. N.B. : 1 EAR OF THE CLUB IS TO BE WELDED

512

ID	MA36103
Make	Erfurt
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -800 Ton MECHANICAL PRESS , TABLE 3400 X 2200 MM

513

ID	MA36080
Make	AIDA,Japan
Model	NS2-3000(1)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 3000ton Slide Stroke : 200mm Stroke Per Minute : No Load : 20~50spm Die Height : 600mm Slide Adjustment : 130mm Slide Area : L . R x F . B : 2400 x 900mm Bolster Area : L.R x F.B : 2600mm x 1200mm Main Motor : 37kW Required Air Pressure : 0.5MPa Max. Upper Dia Weight : 2300kg

514

ID	MA36060
Make	TMP Voronezh Russian
Model
YOM
Condition	Good Condition
Photo	See Photo
RATED CAPACITY TN 3150 SLIDE DISTANCE TO ITS EXTREME LOWER POSITION WHERE THE PRESS DEVELOPS ITS NOMINAL CAPACITY MM 12 CONNECTING ROD N� 2 SLIDE STROKE MM 500�1 CONTINUOUS STROKE PER MINUTE N� 12 SINGLE STROKE PER MINUTE N� 9 DIE SPACE MM 1000 DIE SPACE ADJUSTMENT IN THE RAM MM 300�0,5 TABLE DIMENSIONS L TO R MM 3500 F TO B MM 1800 UPRIGHTS OPENING DIMENSIONS MM 2000 x 1700 SLIDE DIMENSIONS L TO R MM 3500 F TO B MM 1600 HEIGHT OF THE MOBILE TABLE MM 630 HEIGHT OF THE TABLE MM 320 PNEUMATIC CUSHION IN THE TABLE NUMBER N� 2 STROKE MM 200 POWER (P=0,5 MPA) TN 140 OVERALL DIMENSIONS OF THE 2 CUSHIONS L TO R MM 2675 F TO B MM 1125 MAX DIE WEIGHT ON THE RAM (INCLUDED BOLSTER PLATE) KG 10000 TOTAL DIE WEIGHT KG 15000 MAIN MOTOR POWER KW 200 COMPRESSED AIR PRESSURE MPA 0,5 COMPRESSED AIR CONSUMPTION EACH CYCLE DM3 20 OVERALL DIMENSIONS F TO B MM 6900 L TO R MM 5500 PRESS HEIGHT MM 12615 HEIGHT ABOVE FLOOR LEVEL MM 9385 PRESS TOTAL WEIGHT T 468

515

ID	MA36059
Make	Muller Weingarten
Model	ZE 2000-45/22.1.1
YOM	1970
Condition	Very good condition
Photo	See Photo
Capacity 2000 Metric tons Bed 180" x 86" Stroke 48inc Daylight 92.5inc SPM 8-16 spm (could possibly increase to 18 spm) Speed: � Rapid stroke (down) � 560 mm/sec � Working � 80 mm/sec � Rapid stroke (up) � 600 mm/sec Windows 91inc wide Equipped With: Cushions in slide (100 ton, 6inc stroke) Cushions in bed (300 ton, 12inc stroke) Siemens Control Die Change Cart � Installation of rebuilt slide assembly (2010) � Full hydraulic recondition and new cylinder installed (2007) Includes cost for disassembly and loading to trucks Includes cost for packing for ocean freight Dismantled and packed for shipping. Ready for Loading. Can easily inspect the components. Press product Year? 1970�s. Rebuilt by Volkswagen and used as �back-up�. Excellent Condition. * Now power on? running? Dismantled and packed for shipping. Ready for Loading. Can easily inspect the components. * Machine spec . Do you have photo of this press plate ? Yes, photo attached. * Tell us SPM from ? to ? 8-16 spm (could possibly increase to 18 spm) * Manual in German language, can convert to English or other language if needed.

516

ID	MI8384
Make	Cincinnati Milacron,Austria
Model	DPC-6
YOM
Condition	Good Condition
Photo	See Photo
Capacity -150 Ton Strokes Per Minute 32 Width Between Columns 1,370mm Bed Dimension 1,321 x 991mm Top Plate Dimension 1,118 x 610mm

517

ID	MA36053
Make	Weingarten
Model
YOM	1981 in 2007 retrofited
Condition	Good Condition
Photo	See Photo
2400T Pressure, two table, still under power, both table dimension 6220 x 1250 -total press power:��.2.400 t -left ram power:��.1.100 t -right ram power:��.1.300 t -max number of strokes:��.14 -table-left to right:��./ -table left side:��.2.760�1.250 -table right side:��.3.460�1.250 -max tool height:��.1.000 -ram stroke:��.450 -clamping nuts table/ram:��.28/28 -max deep stroke-in table:��.120 -ram regulation:��.80(920-1.000) -transfer:��.CNC TRANSFER 3 D -transfer bands:��.100�120 -transfer bands upstroke:��.0-200 -transfer bands max open:��1.480 -transfer bands min open:��.490 -transfer stroke:��0-795 -regulation of transfer bands:��.non steps,by CNC control -max piece transport weight:��.120 kg -dia tools bar:��.60H6 -cushion stroke:��.120 -cushion max power:��.650 kN DECOILER SYSTEM: -max sheet width:��.890 -max dia coil-external:��.1.500 -dia od decoiler bar:��450-550 -max coil weight:��.5.000 kg LEVELING SYSTEM: -max sheet width:��800 -max sheet thickness:��4 -max leveling surface:��.3.000 mm2 -press system weight:��.apr. 450 t

518

ID	MA36002
Make	Clearing Innocenti
Model	S2 400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Brand Clearing Power 400 Ton Number of conrods 2 Table dimensions X-Y 2743 x 1520 Slide dimensions (x-y) 2743x1520 Stroke 400 Light at tdc 1500 Strokes/min 18 Cushion Power 70 Ton Cushion stroke 200 mm Accessories hydraulic overload

519

ID	MA35850
Make	TMP Voronezh Russian
Model	K3537
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Table; 2500 x 1400 mm Stroke: 400 mm, 20 RPM/ min Day light for tool: 800

520

ID	MA35628
Make	Krupp
Model	PDQ1200
YOM
Condition	Good Condition
Photo	See Photo
Power ton 1200 Table dimensions mm 2800 x 1800 Ram dimensions mm 2500 x 1800 stroke mm 250 Stroke of the ejector into the ram mm 0-100 mm Strokes per minute N�/min 12/24 Opening between the uprights mm 2550 Distance between table and ram mm 550 Motor power Kw 40-80

521

ID	MA35599
Make	ISIS
Model
YOM
Condition
Photo	See Photo
high speed press with 100 - 400 SPM 5 machines ISIS - 25ton, FIT 1 container Specifications are in one of the photo

522

ID	MA35590
Make	WMW Erfurt,Germany
Model	PKZV800
YOM	1986
Condition	Good Condition
Photo	See Photo
Technical specifications: Max. force of slide: 800 tons Stroke of slide: 500 mm Adjustability of slide: 500 mm Max. daylight between bolster and slide (SDAU): 1200 mm Width between columns: 4000 mm Slide area (WxD): 4000x2500 mm Bed area (WxD): 4000x2500 mm Opening in bed (WxD): 3520x1520 mm Moving table height: 630 mm Main motor power: 90 kW Idle stroke rate per 1 min: 14 Counterpressure of cushion in bed: 160 tons Stroke of cushion plate: 200 mm Height above ground: 8400 mm Press weight: approx.230Tons

523

ID	MA35576
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
capacity 1200 tons table :- 4300 x 2500 MM

524

ID	MA35512
Make	WMW Erfurt,Germany
Model	PKZZIV500.1TS
YOM
Condition	Good Condition
Photo	See Photo
Pressure - 500tones Table - 2800x1800mm Shut height - 1100mm Weight - 136000kg

525

ID	MA35507
Make	WMW Erfurt,Germany
Model	PKZV3500.1FS
YOM
Condition	Good Condition
Photo	See Photo
Capacity- 500tones Table - 3150x2100mm Shut height - 1200mm Weight - 145000kg

526

ID	MA35506
Make	WMW Erfurt,Germany
Model	PE2-U-315FS
YOM
Condition	Good Condition
Photo	See Photo
There are 2 (two) such presses available. Capacity - 315tone Table - 2500x1450mm Shut height - 900mm Weight - 71300kg

527

ID	MA35442
Make	AIDA,Japan
Model	C2-20(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200T, Stroke : 250mm, Stroke per Minute : 20~42mm, Slide Adjustment : 110mm, Die Height :500mm, Slide Area : 1850650mm, Bolster Area : 2420840mm Motor : 22Kw, C- Type Presses

528

ID	MA35441
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm C-type presses

529

ID	MA35440
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1993
Condition	Good Condition
Photo	See Photo
Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm C- type presses

530

ID	MA35439
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm, with Die Cushion C-Type Presses

531

ID	MA35438
Make	Amada,Japan
Model	TPW250
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity : 250T, Stroke : 250m, SPM : 40, Die Height: 550, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, Slide Area: 2100*700mm C- types presses

532

ID	MA35421
Make	Seyi,Taiwan
Model	SAG600
YOM	New 2016
Condition	Good Condition
Photo	See Photo
Capacity: 660 Tons Stroke Length: 11.8" Stroke Speeds: 25 - 50 SPM Tonnage Rating Point: 0.26" Shut Height Over Bed (SDAU): 47.24" Die Height: 37.4" Slide Adjustment: 10" Slide Area: 122.05" x 61.02" Bolster Area: 122.05" x 61.02" Bolster Thickness: 9.84" Window Opening: 51.18" x 33.46" Upper Die Weight: 13200 lbs f

533

ID	MA35398
Make	Erfurt
Model	PKZV(I)800FS
YOM
Condition	Good Condition
Photo	See Photo
FS � FRONT SIDE PRESS WITH FRONT MOVING BOLSTER Maximum rated force of slider (12.5 mm till BDC) :- 800 t Permissible rated force of slider (200 mm till BDC) :- 250 t Maximum rated force clamping (pressing) :- 160 t No. of strokes per min :- 14 Max weight of top plate :- 20 t Distance between the column :- 4000 mm Stroke of slider :- 500 mm Adjustment of slider :- 500 mm Shut Height (Max) :- 1700 mm Max depth of drawing :- 200 mm Size of bolster table :- 4000 x 2500 mm Size of slider :- 3950 x 2500 mm Size of opening in bolster :- 3520 x 1520 mm Power of electric motor :- 90 kW Die-cushion force :- 160 t Die-cushion Stroke :- 200 mm Height :- 8400 mm Length :- 6600 mm Width :- 3800 mm Weight (approx) :- 200 Ton

534

ID	MA35397
Make	Erfurt
Model	PKZZIV500
YOM
Condition	Good Condition
Photo	See Photo
Press with front moving table. CENRES OF PRESSURE (POINT) :- 2 MAXIMUM FORCE OF SLIDE, KN :- 5,000 STROKE OF SLIDE, mm :- 500 ADJUSTABILITY OF SLIDE, mm :- 500 MAXIMUM DAY LIGHT BETWEEN BOLSTER& SLIDE (S.D.A.U), mm :-1,100 WIDTH BETWEEN COLUMNS, mm :- 2,800 SLIDE AREA (WIDTH X DEPTH), mm :- 2,800 X 1,700 BED AREA (WIDTH X DEPTH), mm :- 2,800 X 1,800 OPENING IN BED (W X D), mm :- 2,400 X 1,250 MAIN MOTOR POWER, kW :-75 IDLE STROKE RATE, min-1 :- 20 COUNTER PRESSURE OF CUSHION, kN :-- 1,000 STROKE OF CUSHION PLATE , mm :- 200 HEIGHT ABOVE GROUND APROX, mm :- 7,600

535

ID	MA35349
Make	Komatsu
Model	OBW250
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton Stroke : 300 mm SPM : 20-40 Die Height : 550 mm Adjust : 120 mm Slide : 2100 X 700 mm Bolster : 2700 X 950 mm

536

ID	MA35346
Make	Clearing
Model	F42000
YOM	1971
Condition	Good Condition
Photo	See Photo
Capacity: 2000 Ton Bed Area: 180� x 120� Ram Area: 180� x 120� Shut Height: 69� Adjustment: 30� Stroke: 40� Speed: 17 SPM Cushions (3) 200 Ton 80� x 51� 16� Stroke Moving bolster

537

ID	MA35323
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
H-frame hydraulical press two pistons Power ( ton ) :500 Table dimensions ( x-y/mm) :2500x1800 Slide dimensions ( x-y/mm) 2500x1800 Stroke (x/mm) :1000 Light at tdc ( x/mm) :1600 Cushion stroke ( mm) :400 Number of cushion :4

538

ID	MA35306
Make	Schuler German
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Power ( ton ) :500 Table dimensions ( x-y/mm) :3000x1800 Slide dimensions ( x-y/mm) 3000x1800 Stroke (x/mm) :850 Light at tdc ( x/mm) :325 Stroke per minute from 12 to 24

539

ID	MA35259
Make	Weingarten
Model	VK2000.43.85
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity � 2000 Metric Tons LINK DRIVE Stroke � 33� (850mm) SPM � 8 to 15 (Variable) Bed size � 160� x 86� (4000mm x 2200mm) (171� / 4380mm between the uprights) Cushion stroke � 0-300mm Shut height � 59� / 1500mm (Over bolster) Adjustment � 14� (350mm) Windows � 71� (1800mm) wide Bed Cushions � 300 Metric tons, 0-300mm stroke, Pneumatic, adjustable Slide Ejector Cushions � 100 Metric tons, 150mm stroke Hydraulic Overloads Updated Siemens Press Controls Recently overhauled � Very good condition

540

ID	MA35249
Make	Komatsu
Model	OBS25-33
YOM	2006
Condition	Good Condition
Photo	See Photo
CAPACITY:27.5 TON MAX STROKE: 3.15" ADJUSTMENT: 2.17" (STROKE) SHUT HEIGHT: 7.87" STROKE SPEED: 120 SPM RAM AREA: 9.84" X 7.87" BED AREA: 31.5" X 11.8" BOLSTER THICKNESS: 2.68"

541

ID	MA35248
Make	Komatsu
Model	OBS45-33
YOM	2006
Condition	Good Condition
Photo	See Photo
CAPACITY :49.5 TON STROKE :3.94" ADJUSTMENT :2.36" (STROKE) SHUT HEIGHT :9.84" STROKE SPEED :80 SPM RAM AREA: 15.75" X 13.8" BED AREA: 31.5" X 17.7" BOLSTER THICKNESS: 4.33"

542

ID	MA35225
Make	Erfurt
Model	PYD 3-1500+1000-4500X2500-2400 FSE-1500 ton
YOM	1997
Condition	Good Condition
Photo	See Photo
Force : 1500 ton Stroke of the drawing ram : 2400 mm Force of the sheet holder ram : 10000 kN Stroke of the sheet holder ram : 2400 mm Rapid traverse downwards : 600 mm/s Pressing speed range : 10-80 mm/s Retracting speed range : 25-600 mm/s Mold mounting height min. : 600 mm Mold clamping area table : 4500 x 2500 mm Mold clamping area drawing slide : 3800 x 2100 mm Tool clamping area sheet holder ram : 4500 x 2600 mm Upper die mass drawing ram/sheet holder ram max. : 25/40 t Stroke cushion in table max. : 350 mm Counterforce cushion in table max. : 6000 kN Ejection force cushion in table : 1000 kN Stroke cushion in drawing ram : 200 mm Ejection force of cushion in the drawing slide : 1000 kN Weight : 500 ton

543

ID	MA35126
Make	TMP Voronezh Russian
Model	K3539
YOM	1975
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton Slider stroke, mm 315 Distance between table and slide, mm 900 Distance between table and slide, mm 900 Main motor power kW 55 Table size width / length mm 1500/2500 Machine dimensions Length Width Height (mm) 4485_2800_6245 Weight kg 80,000

544

ID	MA35115
Make	Komatsu
Model	OBS-25B
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity:25 ton SPM:125 Stroke mm:75 Die Height:200 Adjust:50 Slide Size mm:250 x 150 Bolster Size mm:500 x 300

545

ID	MA35114
Make	Komatsu
Model	OBS-25-2
YOM
Condition	Good Condition
Photo	See Photo
Capacity:25 ton SPM:125 Stroke mm:75 Die Height:200 Adjust:50:250 x 150 Bolster Size mm:500 x 300

546

ID	MA35113
Make	Komatsu
Model	OBS-45-B
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity:45 ton SPM:50-100 Stroke mm:140 Die Height:230 Adjust:60 Slide Size mm:400 x 300 Bolster Size mm:700 x 450

547

ID	MA35112
Make	Komatsu
Model	OBS60-2
YOM	1983
Condition	Good Condition
Photo	See Photo
Capacity:60 ton SPM:42-85 Die Height:350 Adjust:70 Slide Size mm:450 x 350 Bolster Size mm:900 x 550

548

ID	MA35111
Make	Komatsu
Model	OBS110-3
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity:110 ton SPM:78 Stroke mm:200 Die Height:355 Adjust:100 Slide Size mm:600 x 550 Bolster Size mm:1100 x 700

549

ID	MA35110
Make	AIDA,Japan
Model	NC1-11(2)B
YOM	1983
Condition	Good Condition
Photo	See Photo
Capacity:110 ton SPM:35-65 Stroke mm:180 Die Height:350 Adjust:90 Slide Size mm:600 x 520 Bolster Size mm:1070 x 680

550

ID	MA35109
Make	AIDA,Japan
Model	C1-11(2)
YOM	1978
Condition	Good Condition
Photo	See Photo
Capacity:110 ton SPM:35-65 Stroke mm:180 Die Height:350 Adjust:90 Slide Size mm:600 x 520 Bolster Size mm:1080 x 580

551

ID	MA35047
Make	WMW Erfurt,Germany
Model	PKZZ250
YOM
Condition	Good Condition
Photo	See Photo
Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available (buyer need to equipped the press by new ones) Capacity: 250 ton Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute -12 SPM Adjustment of ram 120 mm Shutheight 760 mm Table cushion force 50 to Cushion stroke 160 mm Weight ca. 40 tons

552

ID	MA35022
Make	WMW,Zeulenroda
Model	PYE250S1
YOM
Condition	Good Condition
Photo	See Photo
250T Hydraulic Single Column Press

553

ID	MA35015
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1200 ton Bed Area: 3600-2500 Ram 3600-2500 Shut Height: 1300 Adjustment: 600 Stroke: 800 mm Front Moving bolster Die Cushion 255 Tons Stroke 275 mm Motor 185 KW Drive Mechanism :- Clutch and Brake SPM :- 8~18 No. of Slide suspension points:- 4 No of Moving Bolster :- One Micro Inching at full load :- yes Cushion Type :-Cylinder Type Cushion Table :-3000-2000mm Cushion Pin Dia :- standard

554

ID	MA34993
Make	Danly
Model
YOM
Condition	Good working condition
Photo	See Photo
Capacity:600 Ton Number of conrods:2 Table dimensions X-Y:2438 x 1371 Slide dimensions (x-y):2438x1371 Stroke:610 Light at tdc:1920 Strokes number Strokes type Fixed Strokes/min:20 Lateral window Lateral window dimensions (x-y/mm):838 Cushion Power:101 Ton

555

ID	MA34992
Make	Muller Weingarten
Model
YOM	2000
Condition	Good working condition
Photo	See Photo
Capacity: 400 Ton Number of conrods: 2 Table dimensions X-Y: 2200 x 1360 Slide dimensions (x-y):2000x1000 Stroke:150 Adjustment slide:150 mm Light at tdc:540 Strokes number Strokes type adjustable Strokes/min Da 30 a 120 Accessories Accessories with arku feeding line width 400, thickness 6 mm 2 mold holders

556

ID	MA34991
Make	Manzoni
Model
YOM
Condition	Good working condition
Photo	See Photo
H frame Capacity:315 Ton Number of conrods:2 Table dimensions X-Y:2600 x 1250 Slide dimensions (x-y):2500x1000 Stroke:80 Second value of the stroke:315 Adjustment slide:200 mm Light at tdc:1365 Strokes number Strokes type adjustable Strokes/min Da 20 a 60 Motors Motor power (kw) 96 Accessories Accessories electronic transfer Overall dimensions Weight:90

557

ID	MA34989
Make	Arrasate
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Table: 2760 x 1560 mm, Stroke: 400 mm, 18 Golpes por min, Between columns; 2710 mm, Power 50 CV

558

ID	MA34988
Make	Schuler German
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Shut height: 1220 mm, Slide adjustment: 325 mm, Stroke: 835 mm, Slide dimensions: 2750 x 1895 mm, Bolster plate (bed)dimensions: 2750 x 1500 mm, Height between bed to floor: 250 mm, Bed cushion tonnage: 140 t Bed cushion stroke: 250 mm, Stroke per min: 12 to 24 spm, Air pressure: De 5 to 7 kg /cm2 main engine power: 100 kw, Automatism circuits: 3 Moving bolster: Front single bolster movement Quantity: 2 nos

559

ID	MA34949
Make	Farina,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
Power 400 tons Strokes per minute 20 Closed die height 1002 mm Feeder plan height 500 mm Fixed slide stroke 400 mm Press plan dimension 2030 x 1260 mm Slide dimension 2130 x 1260 mm Front light uprights 2040 mm Lateral light uprights 480 mm Slide adjustment no Max distance plan‐ slide 1400 mm Extraction rod stroke 200 mm Max width belt 480 mm Number of lower cushions 2 Max extraction of upper cams 220 mm

560

ID	MA34945
Make	Pels
Model	PKE800
YOM
Condition	Good Condition
Photo	See Photo
Pressure - 800 T Table Size - 1400 x 950 MM Slider size - 1000 x 750 MM Open Height - 800 MM Adjustment slider - 140 MM Stroke Slide - 160 MM Plate Thickness - 140 MM Flywheel speed - 500 Per minute Power motor - 50 hor. Weight machines - 56,500 KG there are two such presses available

561

ID	MA34918
Make	Schuler German
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1100 Tons Bed Area: 199� x 100� Shut Height: 65� Adjustment: 13� Stroke: 25� Rolling Bolster Weight 250 tons FB moving bolsters

562

ID	MA34890
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1986
Condition	Good Condition
Photo	See Photo
C Frame Press Capacity:250 ton Stroke:280 mm SPM:20 - 35 Die Height:550 mm Adjust:120 mm Slide:2100 x 700 mm Bolster:2700 x 950 mm

563

ID	MA34830
Make	AIDA,Japan
Model	C2-20
YOM
Condition	Good Condition
Photo	See Photo
Machine Type:C Frame Press Make:Aida Model:C2-20 Capacity:200 ton Stroke:250 mm SPM:24 - 42 Die Height:500 mm Adjust:110 mm Slide:1850 x 650 mm Bolster:2420 x 840 mm Machine Type:Uncoiler Make:Aida Model:LFS-40R4 Coil Weight:3000 kg x 2 Coil Diameter:600 - 1300 mm Coil Width:100 - 400 mm Machine Type:Leveler Feeder Make:Aida Model:LFS-40R Coil Width:100 - 400 mm Thickness:0.5 - 4.5 mm Coil Diameter:600 - 1300 mm Feed Length:25 - 400 mm Feed SPM:25 -45

564

ID	MA34803
Make	Arisa
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
Capacity:1250 ton, TABLE 6000 X 2300 MM CUSHION 63 TM REGULATION 400 MM STROKE 900 MM 8-20 GOPES/MIN. DAYLIGHT 1200 MM POWER 200 KW

565

ID	MA34741
Make	WMW Erfurt,Germany
Model	PKZZI315-2500
YOM
Condition	Good Condition
Photo	See Photo
Max Capacity : 315 ton, Table size : 2500 x 1400 mm, Slide stroke : 400 mm, Slide stroke per 1 min : 25, Slide adjustment : 400 mm, Slide area : 2450 x 1400 mm, Distance between columns : 2500 mm, Table height over floor : 480 mm, Daylight : 1080 mm, Shut height (stroke down-adjustment up): 900 mm, Die cushion capacity : 63 ton, Die cuschion stroke : 160 mm, Voltage : 380 V, Main motor power : 45 kW, Total power requirement: 70 kW, Press dimensions : 4300 x 2500 x 6000 mm, Weight of the machine : 60 ton

566

ID	MA34702
Make	WMW Erfurt,Germany
Model	PKNT315/1400
YOM
Condition	Dismantled,Good condition
Photo	See Photo
Capacity:315 t, External ram effort: 125 t, Internal ram effort: 190 t, Table size :1400�1400 mm, Drawing ram size: 900�900 mm, Sheet clamping ram size: 1350�1350 mm, Shut height: 770 mm, Adjustment: 165 mm, Drawing unit effort: 50 t, Drawing depth :315 mm, Internal ram stroke: 670 mm, Number of strokes per minute 8, Main motor power 32 kW

567

ID	MA34668
Make	Kaiser
Model
YOM
Condition	Good Condition
Photo	See Photo
H- frame mechanical press 2 points Power ( ton ) 250 Table dimensions ( x-y/mm) :1500x1100 Slide dimensions ( x-y/mm): 1500x900 Stroke ( x/mm) : 150 Stroke per minute: from 30 to 150 Feeding line Arku Width ( x/mm) : 600 Thickness ( x/mm) : 2,5

568

ID	MA34655
Make	WMW Erfurt,Germany
Model	PKZZ250/2500
YOM	1972
Condition	Good Condition
Photo	See Photo
Capacity : 250 tons, Ram stroke : 400 mm, No. of strokes : 25/min., Ram adjustment : 120 mm, Shut height : 720 mm, Bed 2500 x 1400 mm, Windows in bed : 2300 x 850 mm, Ram : 2320 x 1250 mm, Main drive motor : 32 kW.

569

ID	MA34624
Make	ROVETTA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton slide stroke 300 mm - stroke par minute 18 - Adjustment of the slide 200 mm dimension table 1600 x 1220 mm

570

ID	MA34529
Make	WMW Erfurt,Germany
Model	PKZZI315.1FS
YOM
Condition	Good Condition
Photo	See Photo
Max. capacity: 315 tons Table size: 2500x1400 mm Slide stroke: 400 mm Slide stroke per 1 min: 25 Slide adjustment: 400 mm Slide area: 2450x1400 mm Distance between columns: 2500 mm Table height over floor: 480 mm Daylight: 1080 mm Shut height (stroke down-adjustment up): 900 mm Die cushion capacity: 63 tons Die cuschion stroke: 160 mm Voltage: 380 V Main motor power: 45 kW Total power requirement: 70 kW Press dimensions: 4300x2500x6000 mm Weight: 60 tons

571

ID	MA34525
Make	Muller Weingarten
Model	SL4-1500-4000-2600
YOM	March 2000
Condition	Good Condition
Photo	See Photo
Capacity: 15000 kN (1686 Short Tons) Bed Area: 4000mm x 2600mm Stroke: 450mm Shut Height: 1200mm Adjustment: 150mm Speed: 10 � 40 SPM Equipped with: Dual Front Moving Bolsters

572

ID	MA34524
Make	Verson
Model	TL-SE4-2000-226-108T
YOM	1990
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 2000 Tons Slide Area: 216� x 108� Bolster Area: 226� x 108� Stroke: 30� Shut Height: 87� Adjustment: 2� Speed: 8 - 24 SPM Capacity of Press at 1/2" Up: 2000 Tons @ 8 SPM Speed: 8 - 24 SPM Micro-Inch Thru Main Motor: 6 SPM EQUIPPED WITH: Cushion Specifications- Type of Cushion: Verson 2-2W26-8 Cushion Location: First Die Station Cushion Capacity @ 65 PSIG: 65 Tons Cushion Capacity @ 150 PSIG: 150 Tons Cushion Working Stroke: 8" Cushion Adjustment: 9" TONNAGE 2,000 T STROKE 30" SHUT HEIGHT 87" ADJUSTMENT 2 in SPM 24 strokes/min. VARI SPEED (YES/NO) Yes BED L 226" BED W 108" CRANK (SINGLE/DOUBLE) Double AIR CLUTCH (YES/NO) Yes WEIGHT 1,874,000#

573

ID	MA34523
Make	Amada,Japan
Model	TP-200C-X2
YOM
Condition	Good Condition
Photo	See Photo
SINGLE CRANK C-TYPE PRESS Capacity: 200 TON S.P.M: 25-45 Stroke: 250mm Die height: 460mm Slide Adjustment: 110mm Slide Area: 850 x 630mm Bolster Area: 1450 x 850mm Supply air pressure：5kgf/cm2 Sudden stop time: 245ms Cushion capacity: 14 TONCapacity: 200 TON S.P.M: 25-45 Stroke: 250mm Die height: 460mm Slide Adjustment: 110mm Slide Area: 850 x 630mm Bolster Area: 1450 x 850mm Supply air pressure：5kgf/cm2 Sudden stop time: 245ms Cushion capacity: 14 TON

574

ID	MA34522
Make	Komatsu
Model	OBS110-2
YOM	1985/2007
Condition	Good Condition
Photo	See Photo
Capacity: 110 TON Stroke: 200mm S.P.M: 50 Die height: 355mm Slide Adjustment: 100mm Slide Area: 600 x 450mm Bolster Area: 1100 x 700 x 130mm Sudden stop time: 184ms Cushion capacity: 8 TON

575

ID	MA34511
Make	WMW Erfurt,Germany
Model	PKZZ250/2500
YOM	1959
Condition	Good Condition
Photo	See Photo
Pressure - 250 tones Slider's travel - 400 mm Table - 2500x1400 mm

576

ID	MA34378
Make	FMI Mecfond
Model	S2-400-2800x1600
YOM	1973
Condition	Good Condition
Photo	See Photo
Nominal Power: 400 ton Stroke: 600 mm Distance between mold-holder and slide : 1300 mm Adjustment: 300 mm Slide dimensions: 2800 x 1600 mm Strokes per minute (continuous): 20 mm Strokes per minute (intermittent): 15 mm Clutch air pressure: 4,2 Kg/cm2 Cushion features Mod: 2-B-38�12 Number of cushions: 2 Number of openings in the base: 2 Stroke: 300 mm Cushion diameter: 38�

577

ID	MA34377
Make	Clearing Innocenti
Model	S2 400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Power: 400 tons Cushions characteristics Number of cushions: 2 Cushions dimensions: 1143 x 990 mm Number of openings in the bench: 2 Cushions pressure: 70 tons (at 5kg / cm3 _air press.) Cushions Stroke: 203 mm Cylinder diameter: 914.4 mm

578

ID	MA34376
Make	Clearing Innocenti
Model	S2 400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Power: 400 tons Stroke:610 mm Minimum distance BTWN bench and slide: 1118 mm Adjustment: 305 mm Left-right front-back dimensions: 2743 x 1524 mm Strokes per minute: 20 Characteristic of the extractor mber of extractors: 2 Number of openings in the bench: 2 Extractor pressure: 65 T.m. (at 5 Kg / cm2) Extractor stroke: 203 mm Cylinder diameter: 914.4 mm

579

ID	MA34375
Make	Innocenti
Model	F4450-132
YOM	1970
Condition	Good Condition
Photo	See Photo
Dimension table 3350 x 2134 mm Stroke of the slide 610 mm Slide adjustment 203 mm Distance between workbench and slide Stroke down, adjustment up 1219 mm Strokes per minute 12/16 mm Extractor stroke 200 mm

580

ID	MI7646
Make	Ravne,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Slide stroke: 400 mm, Shut height: 700 mm, SPM: 18 Bolster area: 2500 x 1250 mm, Slide adjustment: 150 mm, Cushion : Yes

581

ID	MA34366
Make	WMW Erfurt,Germany
Model	PKZV(I)800FS
YOM	1977
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton Table size 4000x2500mm Slider travel - 500mm Slider adjustment - 500mm Working stroke - 12.5mm Closed height min max- 500 - 1000mm Number of strokes per minute - 14 Exhaust stroke -200mm Ejector force - 25 tons Engine power - 90kw Press weight - 240 tons

582

ID	MA34314
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton Stroke:600 mm SPM:14 Die Height:600 mm Bolster:2130 x 1870 mm Slide:1900 x 1200 mm Adjust:200 mm Die Cushion:50 ton Cushion stroke:300 mm Pad:810 x 880 x 2

583

ID	MA34285
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capasity : 300ton Stroke : 620mm SPM : 20 Adjust : 500mm Die Height : 1100 Slide : 2500mm x 1520mm Bolster : 2500 x 1520 Die Cusion : 60ton Cusion Stroke : 0-300mm Pad size : 1080 x 2050mm

584

ID	MI7636
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
H frame Capacity: 300 ton Bed area.950*1000mm Shut height .430 mm Stroke length . 310 mm Ram screw length .80 mm

585

ID	MA34238
Make	Rovetta,Italy
Model
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity:400 ton Stroke of the slide 305 mm Stroke per minute 18-36 n Adjustment of the slide: 254 mm, Dimensions of bolster 2740x1070 mm Dimensions of slide 2740x1070 mm Distance between uprights 2800 mm Thickness of bolster 180 mm Stroke of cushion 150 mm Shut height (Stroke down, adjustment up): 800 mm, Opening in the bed: 5 n Opening per K.O bars: 10 n, Opening in the uprights: 1300-800 mm, Main motor: 75 kW Adjustment motor of the slide: 3,7 kW, Cushion: 5 x 2 n, Total cushions capacity (at 16 bars): 1000 kN, Dimensions of single pressure pad: 650 x 240 mm

586

ID	MA34226
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 300 ton Stroke : 300 mm SPM : 25 - 50 Die Height : 900 mm Adjust : 200 mm Bolster : 2500 x 1500 mm Slide : 2480 x 2480 mm Machine Type : Uncoiler Make : Aida Coil External Diameter : 800 - 1800 mm Coil Internal Diameter : 508 mm Coil Width : 300 - 1300 mm Coil Weight : 15,000 kgs Machine Type : Leveller Make : Aida : Material Width : 300 - 1300 mm Material Thickness : 2.3 - 3.2 mm Work Roller : 80 x 1350 mm Number of Rollers : 4 up, 5 down Pinch Roller : 150 x 1350 mm Number of Pinch Rollers : 2 Machine Type : Feeder Make : Aida Material Width : 460 - 120 mm Material Thickness : 0.6 - 3.2 mm Feed Stroke : 50 - 1000 mm Feed SPM : 20 - 40

587

ID	MI7620
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo
Bed size: 750*800 mm

588

ID	MA34197
Make	AIDA,Japan
Model	PMXL2-300(1)
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton Stroke x spm : 90mm x 60 ~ 150 spm Die height : 500 mm Slide adjustment : 90 mm Bolster area : 1850 x 1000 mm Main motor : 37 Kw Quantity: 2 nos Note : Coil line is not available Delivery : After 20th May, 2021

589

ID	MA34195
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Power ( ton ) :450 Table dimensions ( x-y/mm) :2500x1200 Slide dimensions ( x-y/mm) :2500x1200 Stroke ( mm) :from 18 to 212 Stroke per minute from 30 to 212

590

ID	MA34177
Make	British Clearing
Model	F-4350-84
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY:350 TONS BED AREA:2150 x 1280 mm STROKE ADJUSTMENT:508 mm STROKE LENGTH:410 mm STROKE OF CUSHION:203.2 mm STROKE PER MIN:15 SHUT HEIGHT:1092.2 mm DISTANCE BETWEEN COLUMN:2250 mm PLUS DIE CUSHION SAFETY GUARDS MODERN ELECTRICAL PANEL FULL WORKING ORDER

591

ID	MA34172
Make	British Clearing
Model
YOM	1978
Condition	Good Condition
Photo	See Photo
4 CRANKS TABLE 3050 X 1370 MM CAR 3050 X 1370 MM SIDE WINDOWS 750 MM STROKE 600 MM ADJUSTAMENT 460 MM CONTINUOUS SPEED 20 SPM POWER 55 KW TOTAL HEIGHT 7200 MM

592

ID	MA34171
Make	British Clearing
Model
YOM	1978
Condition	Good Condition
Photo	See Photo
TABLE 2750 X 1500 MM SIDE WINDOWS 750 MM 4 CRANKS CONTINUOUS SPEED 24 SPM STROKE 400 MM ADJUSTAMENT 300 MM CLOSING HEIGHT 815 MM CAR 2500 x 1375 MM POWER 35 KW TOTAL HEIGHT 6.500 MM

593

ID	MI7529
Make	Attenzione Allen Mani
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 150 ton, Bed size: 630 x 1200 mm, Shut height: 500 mm,

594

ID	MI7520
Make	Mankoo India Pvt Ltd
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 150 ton, Bed area L-R x F-B:1016 x 665 mm, Bed to ram distance: 590 mm, Stroke length: 130 mm, Shank hole: 57 mm, No. of slide strokes: 35 Height from floor to top of bed: 850 mm, Bed opening (dia): 150 mm, Motor rating: 15 HP 1440 RPM, Standard Accessories Pneumatic clutch and brake 3 Phase 440 V electric motor Control panel with inch single stroke & continuous mode FRL & Pneumatic fittings Lubrication Pump Photo electric hand safety guards.

595

ID	MA34088
Make	AIDA
Model	PDM-20W
YOM
Condition	Good Condition
Photo	See Photo \| See Video
H Frame Press Make-Aida Model-PDM20W Capacity-200 ton SPM-20 Stroke-300 mm Die Height-850 mm Adjust-430 mm Slide-1830 x 1000 mm Bolster-2000 x 1220 mm Die Cushion-35 ton Cushion Stroke-150 mm Cushion Pad-700 x 700 mm

596

ID	MA34087
Make	Shinohara
Model	PL-350
YOM
Condition	Good Condition
Photo	See Photo \| See Video
H Frame Press Capacity-350 ton SPM-16 Stroke-400 mm Die Height-975 mm Adjust-200 mm Slide-2320 x 1300 mm Bolster-2500 x 1440 x 200 mm Die Cushion-28 ton Cushion Stroke-230 mm Cushion Pad-960 x 920 mm

597

ID	MA34079
Make	Komatsu
Model	OBW250-3
YOM
Condition
Photo	See Photo
Machine Type C Frame Press Make-Komatsu Model-OBW-250-3 Capacity-250 ton SPM-20 - 40 Stroke-300 mm Die Height-550 mm Adjust-120 mm Slide-2100 x 700 mm Bolster-2700 x 950 mm Machine Type Uncoiler Leveler Feeder Make-Orii Model-LCC06HB2HAX-EAS Length-620 Thickness-0.3-4.5 Width-600

598

ID	MA34077
Make	Komatsu
Model	OBW200
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Machine Type C Frame Press Make-Komatsu Model-OBW-200-2B Capacity-200 ton SPM-20 - 40 Stroke-250 mm Die Height-500 mm Adjust-120 mm Slide-1850 x 650 mm Bolster-2400 x 850 Machine Type-Uncoiler Leveler Feeder Make-Orii Model-LCC05HB3JAX-DTS Length-520 Thickness-0.3-3.2 Width-500

599

ID	MI7456
Make	USI Clearing
Model
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Capacity:700 Ton, H-Type,Bed Size :- 3060 x 1830mm, Stroke Length :- 780mm, Max Shut Height :- 1530mm,Min. Shut Height :- 1410mm, Slide Adjustable :- 190mm, Cushion Pin Working 250mm,Day Light Of Machine 1500mm, Main Motor :- 100 HP, Slide Motor :- 7.5 KW,Lub Motor :- 1.5 HP quantity: 1 nos

600

ID	MI7451
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton

601

ID	MI7450
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 150 ton

602

ID	MI7449
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
SINGLE BODY Capacity: 500 ton SINGLE POINT/ DOUBLE GEARED BED SIZE-1500*1100 SHUT HEIGHT- 600 MM ADJUSTMENT- 150mm WITH CUSHION

603

ID	MA34015
Make	Fukui
Model	MDL500
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity:500 ton Die Height:1100 mm Stroke:788 mm SPM:20 Slide:2700 x 1700 mm Bed: 2700 x 1700 mm Die Cushion:150 ton Cushion Stroke:300 mm Cushion Pad:2300 x 1250 mm

604

ID	MA34003
Make	AIDA,Japan
Model	NC1-2000(2)E
YOM	2002
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, 250 mm stroke x 25 ~ 45 spm 450 mm Die Height, 110 mm Adj. 15 Kw Motor

605

ID	MA34002
Make	Komatsu
Model	OBW250-2
YOM	1990
Condition	Good Condition
Photo	See Photo
C Type Press Coil Line Press main specs, Capacity:250 300 mm stroke x 20 ~40 spm 550 mm Die Height, 220 mm Slide Ad. 2700 mm x 950mm Bolster 14.1 Ton Air Die cushion 2.Uncoiler/Feeder Make : Sonoruka Model : DLF-3260 Coil: Max 3,000 Kg OD/ID : 1200mm/508mm Thickness : 0.6 ~ 3.2 x Wide : 100~600 (2.0 x 600/3.2 x 450, 3.2 x 240) Feedings : 400 mm Motor : 4.9 Kw, 200 V

606

ID	MA34001
Make	Komatsu
Model	H2F300
YOM	2003
Condition	Good Condition
Photo	See Photo \| See Video
Servo Press Capacity: 300 ton Stroke:250 mm Die Height:550 mm Adjust:100 mm Bolster:2150 x 1000 Slide:2150 x 900 mm

607

ID	MA33987
Make	AIDA,Japan
Model	PC7
YOM
Condition	Good Condition
Photo	See Photo
Capacity:75 ton SPM:60 Stroke:160 Die Height:320 mm Adjust:70 mm Slide:540 x 400 mm Bolster:950 x 500 mm Die Cushion:9.8 ton Cushion Stroke:90 mm Cushion Pad:390 x 260 mm Quantity: 3 nos

608

ID	MA33986
Make	Amada,Japan
Model	TP60
YOM
Condition	Good Condition
Photo	See Photo
C Frame Capacity:60 ton SPM:48-54 Stroke:178 mm Die Height:497 mm Adjust:76 mm Slide:460 x 340 mm Bolster:815 x 535 With Die Cushion

609

ID	MA33985
Make	Amada,Japan
Model	TP110
YOM
Condition	Good Condition
Photo	See Photo
Capacity:110 ton SPM:50 Stroke:200 mm Die Height:370 mm Adjust:100 mm Slide:625 x 520 mm Bolster:110 x 610 x 105 mm With Die Cushion

610

ID	MA33984
Make	Amada
Model	TP150
YOM
Condition	Good Condition
Photo	See Photo
C Frame Capacity:150 ton SPM:40 Stroke:203.2 Die Height:645 mm Adjust:100 mm Slide:495 x 560 mm Bolster:1270 x 670 mm Cushion Stroke:100 mm Cushion Pad:576 x 350 mm

611

ID	MA33944
Make	Komatsu
Model	OBS150
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 150 ton SPM - 20 - 55 Stroke - 250 mm Die Height - 220 mm Adjust - 100 mm Table - 1250 x 800 mm Slide - 700 x 550 mm

612

ID	MA33939
Make	AIDA,Japan
Model	PDM-20W
YOM
Condition	Good Condition
Photo	See Photo
Capacity:200 ton Die Height:850 mm Stroke:300 mm SPM:20 Slide:1830 x 1000 mm Bed:2000 x 1220 mm With Die Cushion

613

ID	MA33931
Make	WMW Erfurt,Germany
Model	PKZV(1)800/4000
YOM	1972
Condition	Good Condition
Photo	See Photo
Max capacity of slide � 800 ton Press stroke � 500 mm Slide adjustability - 500 mm Drawing depth - 200 mm Table size � 4000 x 2500 mm Idle strokes per minute � 14 Cushion table capacity � 160 t Drawing device stroke � 200 mm

614

ID	MA33924
Make	AIDA,Japan
Model	PD20
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, Stroke per minute : 20, Die Height : 650 mm, Bolster : 2000 x 1200 mm, Slide : 1830 x 1000 mm, Adjust : 400 mm.

615

ID	MI7418
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 250 ton, Table 1350-850, Stroke 250 mm Shut height 425 mm Adjustment-100 SPM 28 With Die Cushion Main motor -30hp

616

ID	MA33855
Make	TMP Voronezh Russian
Model	KB3537
YOM
Condition	Good Condition
Photo	See Photo
Nominal force:500 ton Slide stroke:250 mm Slide strokes per minute:25 Table dimensions:1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment:750 mm Size of distance adjustment between table and slide:250 mm Press dimensions (Length х Width х Height):4130 х 2945 х 7200 mm Press weight:69000 kg

617

ID	MA33839
Make	TMP Voronezh Russian
Model	KB3537
YOM
Condition	Good working condition
Photo	See Photo
Nominal force:500 ton Slide stroke:250 mm Slide strokes per minute:25 Table dimensions:1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment:750 mm Size of distance adjustment between table and slide:250 mm Press dimensions (Length х Width х Height):4130 х 2945 х 7200 mm Press weight:69000 kg

618

ID	MA33815
Make	AIDA,Japan
Model	NC1-110(2)
YOM	1997
Condition	Good Condition
Photo	See Photo
110 ton, Slide stroke:180 mm, Strokes/min:35-65 spm, Die height:350 mm, Slide adjustment:90 mm, Slide area: (L.R.xF.B.):630x520 mm, Bolster Area:1070x680 mm, Main motor:7.5x4 kw, Required Air pressure:5 kgf/cm2, Power supply:200v 50Hz

619

ID	MA33779
Make	WMW Erfurt,Germany
Model	PKZZIII315.1FS
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity:315 ton. Ram stroke:400 mm. Ram stroke per Min.::25 Ram adjustment:: 320 mm. Shuth height: :750* mm. Bed: 2500 x 1450* mm. Ram: 2500 x 1450* mm. Cushion in bed: - stroke:160 mm - stroke adjustment:160 mm - Hold on capacity:630 kN - Ejector capacity: Main motor:55 kW Height above floor level:7100 mm Weight of press: 79 t.

620

ID	MA33754
Make	AIDA,Japan
Model	C2-20(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke: 250 mm, SPM: 25-50 Die height: 500 mm, Adjust: 110 mm Bolster: 2420 x 840 mm, Slide: 1850 x 650 mm, Die cushion: 5.9 tons, Cushion Stroke: 90 mm

621

ID	MA33739
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Stroke: 300 mm, SPM: 15-40, Die height: 650 mm, Adjust: 150 mm, Bolster: 1200 x 1200 mm, Slide: 1200 x 1100 mm, Side opening: 800 x 700 mm, Main motor: VS45 Kw

622

ID	MA33723
Make	AIDA,Japan
Model	NC2-200(1)
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, stroke length: 150 mm, New load continuous stroke number: 35~70 Spm, Die height: 450 mm, Slide adjustment amount: 110 mm, Main motor:22 kW, Air supply pressure: 5 kgf/cm2

623

ID	MA33682
Make	AIDA,Japan
Model	PMXL2-300(1)
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity:300 ton Stroke:200 mm SPM:40 - 100 mm Die Height:550 mm Adjust:100 mm Bolster:1850 x 1000 mm Slide:1850 x 880 mm Machine Type Leveller Feeder Model:LF4032NC Coil Width:100 - 400 mm Thickness:0.8 - 4.5 mm Coil Diameter:1200 mm Max Feed Stroke:400 mm

624

ID	MI7310
Make	Wilkins & Mitchell
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 250 Table: 1350-850, Stroke: 200 mm Shut height: 390 Adjustment-100 With Die Cushion Main motor -30 hp

625

ID	MA33654
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo
2 SCHULER 800 TM MECHANICAL PRESS TABLE 2800 X 1500 MM STROKE 850 MM SLIDE ADJUSTMENT 500 MM 5 SPECIAL TRANSPORT EMPTY HEAD WITHOUT KINEMATICS 6000 MM LENGTH X 2240 MM WIDTH X 2400 MM HEIGHT & WEIGHT 35 TM CAR 3100 MM LENGTH X 2240 MM WIDTH X 2500 MM HEIGHT & WEIGHT 30 TM BASE 4600 MM LENGTH X 4200 MM WIDTH X 2000 MM HEIGHT & WEIGHT 30 TM 2 X MONTANTES 6000 MM LENGTH X 2970 MM WIDTH X 1300 MM HEIGHT & WEIGHT 15 X 2 TOTAL 30 TM + 5 CONTAINERS OPEN TOP 40 �

626

ID	MA33651
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo
250 TON CAPACITY, 72" X 52" BED, 36" SHUT HEIGHT HYDRAULIC CUSHION, 16" STROKE, 13-1/2" X 11-3/4" WINDOW

627

ID	MI7305
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo
400 TON CAPACITY, 108" X 60" BED SIZE, 18" STROKE, 13/18 SPM, 27" SHUT HEIGHT ADJUSTABLE DOWN, 12" ADJUSTMENT, 80 TON CUSHION, 9" STROKE, 22" X 36" WINDOWS, 180,600 LBS.

628

ID	MI7304
Make	Bliss
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton, MDL: 92 1/2-48, Bed: 825 x 1200 mm, W/Single crank control Stroke: 175 mm, Shut height: 287.5 mm, Cushions

629

ID	MI7303
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:125 ton, 36 SPM, 39" x 30" BED, 18" SHUT HEIGHT

630

ID	MI7299
Make	Bliss
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton 58 x 35 Adjustment: 4.5" Shut height: 17.5" Stroke: 8" With cushion

631

ID	MI7298
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Bed size: 110 x 2100 mm, Shut height: 1150 mm, Stroke: 400 mm, Adjustment: 150 mm, SPM: 14 25 HP Window: 300 x 350 mm Cushions

632

ID	MA33640
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
H frame Capacity: 200 ton Bolster: 2000 x 1220 Slide:1830 x 1000 mm Stroke:300 mm SPM:15 - 25 Die Height:850 mm Adjust:430 mm Main Motor:22 Kw Die Cushion:16.7 x 2

633

ID	MA33563
Make	Komatsu
Model	E2W-250
YOM	2006
Condition
Photo	See Photo
Capacity 250 ton Stroke 300 mm SPM 22 - 44 Die Height 550 mm Adjust 120 mm Bolster 2400 x 950 mm Slide 2100 x 700 mm

634

ID	MA33561
Make	AIDA,Japan
Model	C1-11(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity :110 ton Stroke:180 mm Die Height:350 mm SPM:35 - 65 Adjust:90 mm Bolster:1080 x 680 mm Slide:600 x 520 mm Cushion Capacity:9.8 ton Pad Size:480 x 300 mm Cushion Stroke:80 mm

635

ID	MA33545
Make	Komatsu
Model
YOM	2007
Condition	Good Condition
Photo	See Photo
Press is still in factory but currently not in production L4S1500 link motion model, 2 side moving bolsters & it has a die cushion Machine Type Mechanical Press Make Komatsu Capacity 1500 ton Stroke 900 mm SPM 18 Die Height 1250 mm Adjust 400 mm Bolster 3400 x 2000 mm Slide 3400 x 2000 mm Die Cushion 300 ton Cushion Stroke 300 mm Cushion Pad 2930 x 1510 mm PHOTOS ON REQUEST

636

ID	MA33541
Make	Muller
Model
YOM	1980
Condition	Good Condition
Photo	See Photo
Power : 2000 ton Number of pistons : 4 Table dimensions x-y : 4000x2600 Slide dimensions x-y : 4000x2600 Stroke : 1380 Light at tdc : 2300 Cushion Power : 300 ton Stroke : 380 ton Conditions : Machine conditions : working Electric plant conditions : working

637

ID	MA33526
Make	Komatsu
Model	E2P400
YOM	1988
Condition	Good Condition
Photo	See Photo
CAPACITY: 400t STROKE: 250mm SPM: 15 � 25 DIE HEIGHT: 450mm BOLSTER M2: 2500mm X 1700mm With DIE CUSHION (2PADS)

638

ID	MI7286
Make	England
Model
YOM
Condition	Good Condition
Photo	See Photo
DOUBLE SIDED PRESS STEEL BODY DIE CUSHION BED SIZE: 1400 X 1000 mm

639

ID	MA33498
Make	Komatsu
Model	E2W250-K3
YOM	2006
Condition
Photo	See Photo
STROKE: 300mm SPM: 22 - 44 DIE HEIGHT: 550mm BOLSTER M2: 2400 X 950 mm With DIE CUSHION (1pad)

640

ID	MA33487
Make	Komatsu
Model	OBW200
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton SPM : 30 - 50 Stroke:250 mm Adjust: 120 mm Die Height: 500 mm Bolster: 2400 x 800 mm Slide: 1850 x 800 mm

641

ID	MA33485
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton Stroke: 500 mm Shut Height: 1440 mm SPM: 15 Adjust: 400 mm Moving Bolster: 3400 x 1500 mm Slide: 3400 x 1500 mm Cushion Capacity: 60 ton, 2 pad Cushion Stroke:250 mm

642

ID	MI7280
Make	Schuler German
Model
YOM
Condition	Good Condition
Photo	See Photo
Pneumatic press Capacity: 150 ton

643

ID	MI7279
Make	Godrej,India
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton

644

ID	MA33477
Make	Amada
Model	TPW300
YOM	1997
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 300 ton Stroke : 250mm SPM : 15 - 30 Die height : 550mm Bolster M2. 2800 X 880mm + Leveler feeder

645

ID	MA33428
Make	Seyi,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton Stroke : 250 mm Die Height : 600 mm Slide Adjust : 200 mm Breaking timing : 258 m.s.

646

ID	MA33427
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Specification attached in photos.

647

ID	MA33426
Make	Seyi,Taiwan
Model	SNC110
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 110 Ton

648

ID	MA33425
Make	SHIEH YIH
Model	SNC200
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity : 200 Ton Stroke : 220 mm SPM : 25-45 mm Die Height : 450 mm Ram Adjustment : 110mm

649

ID	MA33423
Make	Komatsu
Model	OBS150-3
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 Ton Number of slide strokes : 40spm Slide stroke : 200mm Die Height : 450mm Slide adjustment : 100mm Slide dimensions : 700x550mm

650

ID	MA33422
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 ton

651

ID	MA33421
Make	Komatsu
Model	OBS200-3
YOM	1990
Condition	Good Condition
Photo	See Photo
Specification attached in photos.

652

ID	MA33420
Make	Clearing-Niagara
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton Max rated capacity : 25 Stroke : 8 Shut Height : 32 Slide Adjustment : 11 Bed area L-R F-B : 84x48 Slide area L-R F-B : 84x48 Stroke per min : 40-80

653

ID	MA33417
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1)Model:80 Make:Aida 2)Model: TP60Si Make: Amada 3)Model: TP110EX Make: Amada 4)Model:110 Make: Aida

654

ID	MA33398
Make	WMW Erfurt,Germany
Model	PKZZ315.1/2500FS
YOM
Condition	Good Condition
Photo	See Photo
Max. capacity: 315 tons Table size: 2500 x 1400 mm Slide stroke: 400 mm Slide stroke per 1 min: 25

655

ID	MA33383
Make	AIDA,Japan
Model
YOM	1992
Condition	Good Condition
Photo	See Photo
Type : C Frame Press Capacity : 250 ton Stroke : 280 mm SPM : 20 - 35 Die Height : 550 mm Adjust : 120 mm Bolster : 2700 x 920 mm Slide : 2100 x 700 mm

656

ID	MA33377
Make	WMW Erfurt,Germany
Model	PKZZ250
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton Table surface : 2500 x 1400 mm Ram surface : 2320 x 1240 mm Table height over floor : 560 mm Stoke of the ram : 400 mm

657

ID	MA33358
Make	AIDA,Japan
Model	NC2-250(2)
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton Stroke: 280 mm SPM: 20 - 35 Die Height: 550 mm Adjust: 120 mm Bolster: 2700 x 920 mm Slide:2100 x 700 mm

658

ID	MA33338
Make	Reimei
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:500 ton Stroke:600 mm SPM :18 Die Height:1005 mm Adjust:350 mm Bolster:3000 x 1600 mm Slide:2820 x 1600 mm Die Cushion:1 pad, 2 cylinders Capacity:100 tons Cushion Stroke:300 mm Cushion Pad:24520 x 1300 mm

659

ID	MA33337
Make	AIDA,Japan
Model
YOM
Condition	Good working condition
Photo	See Photo \| See Video
Machine Type: Mechanical Press Make: Aida Capacity: 350 ton Stroke:200 mm Die Height:600 mm SPM :35 Adjust:200 mm Bolster:3000 x 1500 mm Slide:2800 x 1500 mm Machine Type:Leveler Feeder Unit Make:Kyowa Width:1350 mm Thickness:0.4 - 3.2 mm

660

ID	MA33321
Make	AIDA,Japan
Model	NC1-2000(2)E
YOM	2011
Condition	Good Condition
Photo	See Photo
Capacity: 2000 ton

661

ID	MA33320
Make	Shimomura
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton Stroke : 250 mm SPM : 25 Shut Height : 550 mm Open Height : 900 mm Adjust : 150 mm Bolster : 1500 x 1200 mm

662

ID	MA33318
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton Stroke : 300 mm SPM : 20 Die Height : 630 mm Adjust : 380 mm Bolster : 2000x1220 mm Slide : 1830x1000 mm Main Motor : 18.5 Kw

663

ID	MA33316
Make	Baba
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton Stroke : 230 mm SPM : 25 Shut Height : 550 mm Adjust : 100 mm Bolster : 4000 x 1200 mm Slide : 4000 x 1100 mm Main Motor : 22 Kw

664

ID	MA33315
Make	Okamoto
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton Stroke : 350 mm SPM : 20 Die Height : 950 mm Adjust : 130 mm Bolster : 2000 x 1500 mm Main Motor : 15 Kw

665

ID	MA33314
Make	Komatsu
Model	OBS200
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton SPM : 28 - 55 Stroke : 250 mm Adjust : 120 mm Die Height : 450 mm Bolster : 1450 x 840 mm Slide : 850 x 650 mm

666

ID	MA33313
Make	AIDA,Japan
Model	DSF-N2-3000
YOM	2017
Condition	Good Condition
Photo	See Photo
Capacity: 3000 ton

667

ID	MA33301
Make	Erfurt
Model	PKZZIV500FS
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000 2 presses available

668

ID	MA33282
Make	Niagara
Model	SE2-400-144-60
YOM	1977
Condition	Good Condition
Photo	See Photo
Capacity : 400 Ton Bed Area : 144� x 72 Stroke : 14 Shut Height : 40 SDAU Adjustment : 14 SPM : 15-30 Windows : 50

669

ID	MA33243
Make	WMW Erfurt,Germany
Model
YOM	1974. General overhauling in 2004 made by ZDAS
Condition	Good Condition
Photo	See Photo
Force: 1250 T Table 4000 x 2500 mm Ram 3950 x 2500 mm Ram stroke 630 mm Ram adjustment 630 mm Max tool height 1250 mm Main motor 132 kW Number of strokes 11/min Equipped with: Moving bolster lateral Cushion Quantity: 5 PKZVI1250 + 1 PKZV 1250

670

ID	MA33229
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:600 ton Bed Size: 108'' x 72'' Stroke: 20'' Shut Height: 51 1/4'' Bolster Height: 11''

671

ID	MA33227
Make	Clearing
Model	F2-400-84x60
YOM
Condition	Good Condition
Photo	See Photo
400 Ton Capacity 18" Stroke 48" Shut Height 12" Slide Adjustment 10 SPM Equipped With: Air Clutch & Brake Air Cushions T-Slotted Bolster & Ram Link Solid State Controls Tonnage

672

ID	MA33221
Make	Dieffenbacher
Model
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity: 2400 ton, Table size: 3500 x 2300 mm Closing Speed: 1000 mm/s

673

ID	MA33220
Make	Muller
Model
YOM	1982
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton, Table size: 1650 x 1250 mm

674

ID	MA33173
Make	WMW Erfurt,Germany
Model	PKZZI1250
YOM
Condition	Good Condition
Photo	See Photo
Capacity, ton 1250 Centers of pressure 2 Idle stroke rate 11 Distance between the uprights, mm 4000 Shut height, mm 1165 Table dimensions, mm 4000 x 1800 Table gap, mm 3750 x 1300 Ram dimensions, mm 3950 x 1800 Ram stroke, mm 630 Ram adjustment, mm 630 Die cushion capacity, ton 250 Greatest depth of extraction, mm 250 Main motor power, kW 132 Press weight, kg 215000

675

ID	MA33164
Make	Erfurt
Model	PASU100
YOM
Condition	Good Condition
Photo	See Photo
Pressure - 100tones. Sheet's thickness - 2,8mm Strokes per minute - 360 Table - 880x715mm Weight - 10000kg Quantity : 2 Pcs

676

ID	MA33162
Make	AIDA,Japan
Model	C2-11
YOM
Condition	Good Condition
Photo	See Photo
C Frame Press Capacity : 110 ton Stroke : 180 mm SPM : 35 - 65 Bolster : 1780 x 680 mm Slide : 1300 x 520 mm Die Height : 400 mm Adjust : 90 mm

677

ID	MA33161
Make	Washio
Model	CX2-150
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 ton Die Height : 450 mm Stroke : 200 mm SPM : 45 Adjust : 85 Bolster : 2000 x 650 mm Ram : 1500 x 550 mm Die Cushion : 17 tons Cushion Stroke : 100 mm

678

ID	MA33155
Make	AIDA,Japan
Model	NC2-16
YOM
Condition	Good Condition
Photo	See Photo
C Frame Press Capacity : 160 ton Stroke : 200 mm SPM : 30 - 55 Bolster : 2040 x 760 mm Slide : 1500 x 580 mm Die Height : 450 mm Adjust : 100 mm

679

ID	MA33111
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine type : Mechanical press Make : Aida Capacity : 500 ton Bolster : 1200x1100mm Slide : 1100x1100mm Stroke : 300mm SPM : 30 Adjust : 150mm Die Height : 600mm Main Motor : 37Kw Machine type : Uncoiler Make : Orii Coil width : 600mm Coil inner diameter : 508mm Coil outer diameter : 1500mm Speed : 16rpm YOM : 1987 Machine type : Leveller Feeder Make : Orii Roll size : 620mm Material Thickness : 0.6-6.0mm Max feed length : 500mm YOM : 1987

680

ID	MA33078
Make	ISGEC
Model
YOM
Condition	Good Condition
Photo	See Photo
Power 2000 ton Link drive system Table dimensions ( x-y/mm) 6100x2800 Slide dimensions ( x-y/mm) 6100x2800 Stroke( mm) 1000 Shut height (mm)1400 Adjustment of the stroke ( mm) : 300 Stroke per minute ( 8-16) Motor Power : 315 kw Five cushion Power 320 ton Adjustable stroke of the cushion ( mm) 30-250 Two lateral moving bloster Hydraulic overload Six robot Comau interpress Two table for the loading of the sheet metal

681

ID	MA33044
Make	Sato
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:200 ton Stroke:250 mm SPM: 25 - 45 Die Height: 450 mm Adjust: 110 mm Bolster: 2420 x 840 mm Slide: 1850 x 650 mm

682

ID	MA33034
Make	TMP Voronezh Russian
Model	K3535A
YOM
Condition	Good Condition
Photo	See Photo
Nominal press effort: 3150 kN Slide stroke: 400 mm Number of slide strokes per minute: 25 Distance adjustment between table and slide: 250 mm Distance between table and slide in its lower position at upper position of adjustment: 750 mm Table dimensions: 2500 x 1250 mm Main motor power: 47 kW Press dimensions: -Length: 4555 mm -Width: 2900 mm -Height: 5855 mm Press weight: 50900 kg

683

ID	MA32933
Make	Erfurt
Model	PAUST210
YOM	1974
Condition	Good Condition
Photo	See Photo
Main slider's pressure between columns - 160tones Each stamp-holder's pressure - 50tones Drawing-out depth - 125mm

684

ID	MA32932
Make	Erfurt
Model	PAUST320
YOM	1981
Condition	Good Condition
Photo	See Photo
Max pressure - 250tones Pressure of each stamp-holder - 80tones Drawing-out depth - 140mm

685

ID	MA32914
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 200 ton SPM : 60 - 150 Stroke : 200 mm Adjust : 100 mm Bolster : 1500 x 1100 mm Slide : 1500 x 900 mm

686

ID	MA32867
Make	FMI Mecfond
Model
YOM	1993
Condition	Good Condition
Photo	See Photo
Nominal Power��.��. 400 tonn Stroke par minute�� 18 Height closed mould��.��. 1300 mm. Ram Stroke - fixed�.��. 600 mm. Dimension table�.��. 2800 x 1600 mm. Dimension ram��.��. 2800 x 1600 mm. Frontal light columns��.��. 2850 mm. Lateral light colums �.��. 1300 mm. Stroke rod extraction.�� 220 mm. Number of lower cuschion��. 2

687

ID	MA32866
Make	Benelli
Model
YOM	1974
Condition	Good Condition
Photo	See Photo
Power 400 tons Strokes per minute 18 Shut height 1000 mm Fixed slide stroke 320 mm Press plan dimension 2500 x 1500 mm Slide table dimension 2500 x 1500 mm Front light uprights 2520 mm Lateral light uprights 480 mm Slide adjustment no Extraction rod stroke 200 mm Number of lower cushions 2 Max extraction of upper cams 170 mm

688

ID	MA32865
Make	Farina,Italy
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Power 400 tons Strokes per minute 20 Closed die height 1002 mm Feeder plan height 500 mm Fixed slide stroke 400 mm Press plan dimension 2030 x 1260 mm Slide dimension 2130 x 1260 mm Front light uprights 2040 mm Lateral light uprights 480 mm Slide adjustment no Max distance plan‐ slide 1400 mm Extraction rod stroke 200 mm Max width belt 480 mm Number of lower cushions 2 Max extraction of upper cams 220 mm

689

ID	MA32863
Make	Mecfond
Model	S2-400-2800x1600
YOM	1973
Condition	Good Condition
Photo	See Photo
Nominal Power: 400 ton Stroke: 600 mm Distance between mold-holder and slide: 1300 mm Adjustment: 300 mm Slide dimensions: 2800 x 1600 mm Strokes per minute (continuous): 20 mm Strokes per minute (intermittent): 15 mm Clutch air pressure: 4,2 Kg/cm2 Cushion features Mod: 2-B-38�12 Number of cushions: 2 Number of openings in the base: 2 Stroke: 300 mm Cushion diameter: 38�

690

ID	MA32862
Make	Clearing Innocenti
Model
YOM
Condition	Good Condition
Photo	See Photo
Power: 450 tons Slide travel: 610 mm Cushion Stroke: 305 mm Cushion capacity: 84 tons Air 5Kg / cm2 Main engine: 6HP ‐ Turns 965 Strokes per minute: 12 ‐ 16 Tightening of column nuts: 1 turn ‐ 1/8 of a turn

691

ID	MA32861
Make	Clearing Innocenti
Model	S2-400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Power: 400 tons Cushions characteristics Number of cushions: 2 Cushions dimensions: 1143 x 990 mm Number of openings in the bench: 2 Cushions pressure: 70 tons (at 5kg / cm3 _air press.) Cushions Stroke: 203 mm Cylinder diameter: 914.4 mm

692

ID	MA32860
Make	Clearing Innocenti
Model	S2-400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Power: 400 tons Stroke: 610 mm Minimum distance BTWN bench and slide: 1118 mm Adjustment: 305 mm Left‐right front‐back dimensions: 2743 x 1524 mm Strokes per minute: 20 Characteristic of the extractor Number of extractors: 2 Number of openings in the bench: 2 Extractor pressure: 65 T.m. (at 5 Kg / cm2) Extractor stroke: 203 mm Cylinder diameter: 914.4 mm

693

ID	MA32859
Make	Clearing Innocenti
Model	F4450-132
YOM
Condition	Good Condition
Photo	See Photo
Power: 450 tons Slide travel: 610 mm Cushion Stroke: 305 mm Cushion capacity: 84 tons Air 5Kg / cm2 Main engine: 6HP ‐ Turns 965 Strokes per minute: 12 ‐ 16 Tightening of column nuts: 1 turn ‐ 1/8 of a turn

694

ID	MA32795
Make	Erfurt
Model	PKZZIV315.1TS
YOM	1988
Condition	Good Condition
Photo	See Photo \| See Video
with moving table max. piston force 3150 kN with distance before u.T. 12.5 mm The force on the piston 1100 kN with distance before u.T. 160 mm number of strokes 25/min at idle piston stroke 400 mm Max stroke 160 mm adjustable stroke 160 mm Tensile strength up to 630 kN backward force max 630 kN side window - 1460x1460 mm

695

ID	MA32794
Make	Erfurt
Model	PKZZI800
YOM	1981
Condition	Good Condition
Photo	See Photo
max ram force at a distance before the bottom dead center 12.5 mm 8000 kN ram force at a distance before the bottom dead center 200 mm 2500 kN Max . work at 10 strokes per min . : 30 kJ Max . Work at 1-4 strokes per min . : 50 kJ Ram stroke : 500 mm Adjustability of slide 500 mm Cushion in the table : - 200 mm - Adjustability 200 mm stroke - Protipřidr�ovac� force 1600 kN - Ejection force of 250 kN Number of strokes: 1-10 / min Number of strokes 14/min running on empty Shutheight : 1050 mm Table dimensions: 3150 x 1600 mm Slide dimensions : 3100 x 1600 mm The passage between columns : 3150 mm The height from the floor to the top edge of table : 600 mm Number of ejector rails in the ram : 5 pcs The track bouncers : 50 mm Total power bouncers : 245 Kn Main motor output : 100 kW Press height above floor : 8430 mm Weight: 145000 kg

696

ID	MA32754
Make	Manzoni
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Nominal Power �� 630 ton Stroke par minute �� 15-35 Number of Station ��. 4 Passage between stations��. 380 mm. Height closed die ��.��. 850 mm. Height table feeder��. 401 mm. Ram stroke - fixed �� 350 mm. Dimension table��. 1850 x 1250 mm. Dimensione ram�� 1850 x 1250 mm. Front light columns��. 1850 mm. Lateral light colums �� 1200 mm. Distance max table-ram ��. 1200 mm. Bars Opening Stroke��. 105 mm. Internal Light closed bars��. 300--600 mm. Internal Light open bars �� 820 mm. Max width coil ��.��. 500 mm. No. Lower cuschion��. 4 Max camme extraction sup.��. 210 mm.

697

ID	MA32747
Make	AIDA,Japan
Model	PDA-20H
YOM	1984
Condition	Good Condition
Photo	See Photo
Press capacity: 200 ton, Stroke length; 200 mm, Stroke per minute: 48~120 S.P.M. Slide area: 1500 x 900 mm, Bolster area:1500 x 1100 mm, Slide adjustment: 100 mm, Die height: 450 mm, Frame type: H Material of frame: Steel, Motor power: 30 kW, Machine weight: 35 ton, Dimensions( L x W x H): 1.8 x 3.5 x 5.2 m, Stroke length: 200 mm, Stroke per minute: 48~120 s.p.m Die height: 450 mm, Slide area: 1500 x 900 mm

698

ID	MA32744
Make	WMW Erfurt,Germany
Model	PKZZ250
YOM	1972
Condition	Good Condition
Photo	See Photo
Centres of pressure: 2 Maximum force of slide: 250 ton Stroke of slide: 400 mm, Adjust ability of slide: 120 mm, Max. daylight between bolster and slide, SDAU: 580 mm, Width between columns: 2500 mm Slide area (W x D):2320 x 1250 mm, Bed area (W x D): 2500 x 1400 mm, Opening in bed (W x D): 2300 x 850 mm Main motor power: 32 kw Idle stroke rate, per min: 12 Counter pressure of cushion in bed: T 50 Stroke of cushion plate: 160 mm, Height above ground: 5000 mm

699

ID	MA32714
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 ton Stroke : 200mm Shut Height : 400mm SPM : 45 Bolster : 1220x760mm Slide : 13 ton Die Cushion : 13 ton Cushion Stroke : 80mm Cushion Pad : 540x340mm Quantity : 2 nos

700

ID	MA32674
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
1) Machine type: C frame press, Double crank Make: Aida Capacity: 200 ton, Stroke: 200 mm, Die height: 525 mm, SPM: 50 Bolster: 2400 x 800 mm, Slide: 1830 x 650 mm, Adjust: 105 mm, 2) Machine type: C frame press, Double crank Make: Aida Capacity: 150 ton, Stroke: 200 mm, Die height: 450 mm, SPM: 45 Bolster: 1950 x 650 mm, Slide: 1480 x 550 mm, Adjust: 85 mm, 3)Machine type: C frame press, Double crank Make: Aida Capacity: 100 ton, Stroke: 170 mm, Die height: 350 mm, SPM: 50 Bolster: 1060 x 560 mm, Slide:600 x 450 mm, Adjust:75 mm,

701

ID	MA32638
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 160 ton Die Height: 450 mm Stroke: 200 mm SPM :45 Adjust: 100 Bolster: 2020 x 760 mm Ram:1500 x 580 mm With: Die Cushion

702

ID	MA32615
Make	Verson
Model	SE2-600-96-54
YOM	1971
Condition	Good Condition
Photo	See Photo
Capacity: 600 tons, Bed area: 96" x 54 " Ram area: 96" x 54" Bolster: 8" T-slotted bolster: 96" x 54" 4 knock outs in ram, Windows: 20" Stroke: 12 " Adjustment: 6" Speed variable : 25-50 spm, Shut height SDAU: 41" Cushion in bed of press: 30 tons, Distance between IBS: 98 1/2" Bed to gibs: 35" Main motor: 125 HP Height above floor: 276 1/2" Overall height: 315 3/8" Total weight of press: 167,000 LBS Equipped with: Air clutch Air brake Dipro 1500 wintress die protection unit Load grad trade series 4 JIC electrical controls Sesco model: 53-167 10,000 LB x 14" max width decoiler Sesco stock straightener Mechanical press roll feeder drive eccentric

703

ID	MA32605
Make	WMW Erfurt,Germany
Model	PKZVIII500.1FS
YOM	1986
Condition	Good working condition
Photo	See Photo
Capacity - 500 tones. Working table - 3150 x 2100 mm Distance between tables - 1200 mm Dimensions - 7500 x 4700 x 4400 mm Weight - 140000 kg

704

ID	MA32598
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 350 ton Stroke: 450 mm Die Height: 700 mm SPM: 16 Adjust: 250 mm Bolster:2130 x 1370 mm Slide: 2130 x 1370 mm With: Die Cushion

705

ID	MA32591
Make	WMW Erfurt,Germany
Model	PKZZI1250/4000
YOM	1975
Condition	Good Condition
Photo	See Photo
1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm,weight 245 tons

706

ID	MA32569
Make	Komatsu
Model	E4T1500-05-90-MF-D
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity :1500 Metric Ton Bed area :4800 x 2300 mm Stroke length: 650 mm Die Height: 1300 mm Slide Adjustment: 200 mm Equipped With: Dual Rolling Bolsters, Maximizer TPC Press Control New in 2017, Hydraulic Die Clamping, 3 Axis Transfer, (5) Station Pneumatic Cushion, Blank Stacker Strokes per minute: 5 & 8-22

707

ID	MA32567
Make	TMP Voronezh Russian
Model	KB3537
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 tons, Slide stroke : 250 mm, No. of strokes/min 25 Shut height 750 mm Table dimensions : 2500 x 1400 mm, Slide dimensions : 2380 x 1200 mm, Main motor power 47 kW Overall dimensions : 4350 x 2470 x 5660 mm, Height above floor : 5660 mm, Press weight : 70 tons.

708

ID	MA32561
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 300 ton, Stroke: 300 mm, SPM: 25-40 Bolster: 2500 x 1300 mm, Slide: 2450 x 1000 mm, Die height: 725 mm, Adjust: 100 mm, Machine type: blnk feeder, Feed stroke: 250 mm, Clamp stroke: 80 mm, SPM: 40 finger bar width: 360 mm, Stages; 9

709

ID	MA32544
Make	FMI Mecfond
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:1500 ton, Table:4650 X 2700 MM E stroke: 500 MM Stroke: 8-30 MIN. Power: 400 KW Weight:450 TM

710

ID	MA32461
Make	WMW Erfurt,Germany
Model	PE2-U-315-2500-1450
YOM	1984
Condition	Good Condition
Photo	See Photo
Capacity - 315 tons Moving table - 2500 x 1450 mm Ram stroke - 400 mm Ram adjustment - 320 mm Shut height - 900 mm Ram strokes - 25 spm Weight - 71300 лп

711

ID	MA32415
Make	AIDA,Japan
Model	DSF-S4-15000-610-245
YOM	2015
Condition	never installed,new in pack
Photo	See Photo
CAPACITY - 1500 TONS (15,000 kN) SUSPENSION POINTS - 4 RATING UP TO 30 SPM - 1/4" (6.2 mm) STROKE LENGTH - 24" (610 mm) SPEED (CONTINUOUS) 1 TO 30 SPM CONTINUOUS WORKING ENERGY FULL REVOLUTION: @ 30 spm 1,659"-TONS (375 kJ) @ 10 spm 3,030"-TONS (685 kJ) @ 40 spm 619"-TONS (146 kJ) BOLSTER AND SLIDE L-R 240" (6,100 mm) F-B 96.4" (2,450 mm) MOVING BOLSTERS (FRONT TO BACK DIRECTION) 2 BOLSTER CAPACITY 132,000# (60,000 kN) MOVING BOLSTER SPEED 40 ft/min (12 m /min) MOVING BOLSTER HEIGHT 28.35" (720 mm) SLIDE ADJUSTMENT 11.8" (300 mm) SLIDE ADJUSTMENT SPEED 2" / min (50 mm/min) DIE HEIGHT (SDAU BOLSTER) 48.03" (1,220 mm) SLIDE DEFLECTION 1.0015"/ft (1/8000 mm/mm BED DEFLECTION 0.0015"/ft (1/8000 mm/mm) MAX UPPER DIE WEIGHT 66,120 Lbs (30,000 kgf) UPRIGHT OPENING WIDTH 128" (3,250 mm) APPROXIMATE OVERALL HEIGHT 365" (9,271 mm) MOTOR SIZE (3) X 670 Hp (500 kW) AIR SUPPLY 80 PSI (5.5 BAR) VOLTAGE 480 V - 3 PH - 60 Hz CIM-Tech hydraulic press (KOREA) Force on main cylinder: 5000 t Lifting force: 139 t Distance between column: 6500 mm Open height: 4800 mm Under stamping plate: 6500 x 2420 mm Cylinder stroke: 1500 mm Automatic manipulator CIM MP25 Force: 25 t Min/Max diameter: 1900/6000 mm Main motor: 100 HP Height: around 1900 mm Rotation speed: 10-15 rpm

712

ID	MA32372
Make	WMW Erfurt,Germany
Model	PKZZIV500/2800
YOM
Condition	Excellent condition,under power
Photo	See Photo
Capacity, ton 500 Table size, mm 2800 x 1800 Ram size, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Strokes per minute 20/25 Shut-height, mm 1100 Distance between columns, mm 2800 Stroke of cushion plate, mm 200 Counter pressure of cushion in bed, ton 100 Motor capacity, kW 75 Equipped with side moving bolsters. Quantity: 2 nos

713

ID	MA32370
Make	WMW Erfurt,Germany
Model	PKZZIV500.1TS
YOM
Condition	Excellent condition,under power
Photo	See Photo
Capacity, ton 500 Table size, mm 2800 x 1500 Ram size, mm 2800 x 1500 Ram stroke, mm 500 Ram adjustment, mm 500 Strokes per minute 20 Shut-height, mm 1100 Distance between columns, mm 2800 Stroke of ram ejector, mm 200 Stroke of cushion plate, mm 200 Counter pressure of cushion in bed, ton 100 Motor capacity, kW 75 Press weight, kg 136000 Equipped with moving bolsters. Quantity: 2 nos

714

ID	MA32364
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
capa: 2000 TON(2 Point) Die Hight : 900mm Slaider Ajust : 200mm Stroke : 487mm SPM : 4~6 BOLSTER : 7000x1750mm

715

ID	MA32325
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton Stroke : 300 mm SPM : 25-40 Bolster : 2500 x 1300 mm Slide : 2450 x 1000 mm Die Height : 725 mm Adjust : 100 mm Machine Type : Blank Feeder Feed Stroke : 250 mm Clamp Stroke : 80 mm SPM : 40 Finger Bar Width : 360 mm Stages : 9

716

ID	MA32321
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton Stroke : 400 mm SPM : 12 Die Height : 900 mm Adjust : 400 mm Bolster : 3000 x 1500 mm Slide : 3000 x 1500 mm Die Cushion : 80 ton Cushion stroke : 250 mm Main Motor : 55 Kw

717

ID	MA32310
Make
Model	KB5535
YOM
Condition	Good Condition
Photo	See Photo
Drawing slide capacity, tf 315 Rated distance of slide above bottom, mm 16 Drawing slide stroke, mm 630 Drawing slide shut height, mm 720 Drawing slide dimensions, mm left to right 800 front to back 800 Blankholder nomanal capacity, tf 200 Rated distance of blankholder above bottom, mm 6 Blankholder stroke, mm 400 Blankholder shut height, mm 620 Blankholder dimensions, mm left to right 1250 front to back 1250 Continous run frequency, min-1 10.16 Slides single strokes max. frequency, min-1 7,5.12 Shut height adjustment,mm 200 Bolster plate dimensions, mm left to right 1250 front to back 1250 Main drive electric motor power, kW 71 Overall dimensions, mm left to right 6760 front to back 5830 height above floor level 6500

718

ID	MA32266
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1) Make: Aida Capacity: 500 ton Stroke: 605 mm Die Height: 1000 mm SPM: 25 Adjust: 500 mm Bolster: 2750 x 1700 mm Slide: 2750 x 1700 mm Die Cushion: 150 ton Cushion Stroke: 250 mm, 2) Make: Fukui Capacity : 400 ton Stroke: 400 mm Die Height: 700 mm SPM: 25 Adjust: 300 mm Bolster : 2130 x 1370 mm Slide :2130 x 1370 mm Die Cushion: 80 ton Cushion Stroke : 230 mm

719

ID	MI7076
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton

720

ID	MA32219
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
C frame Capacity: 200 ton, Stroke: 250 mm, Die height: 500 mm, SPM: 33 Adjust: 105 mm, Bolster: 2400 x 800 mm, Slide: 1830 x 650 mm

721

ID	MA32203
Make	Smeral,Czech
Model	LKT250A
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton, Working stroke: 12,5 mm, Number of strokes of slide: 25 min -1, Passage: 1600 mm, Shut height: 760 mm, Stroke of slide: 250 mm, Clamping surface of slide: 1560 x 900 mm, Clamping surface of table: 1600 x 1200 mm, Capacity if main electromotor: 30 kW, Dimensions L x w x h: 2980 x 1500 x 4800 mm, Weight: 27000 kg

722

ID	MA32198
Make	Spiertz
Model	F4E-125-43
YOM	1978 and 1982
Condition	Good Condition
Photo	See Photo
Pressure Capacity :1250 t Ram stroke :762 mm Ram adjustment :610 mm Table surface area: 4300 mm x 2320 mm Slide surface area :4300 mm x 2320 mm Shut height (S.D.A.U.): 1.260 mm Number of strokes: 8 to 18 spm Distance between the columns: F-B 4320 mm Distance between columns: L-R 2400 mm Moving bolster height over floor: 450 mm Height above floor: 530 mm Cushion pnumatic capacity: 260 ton Cushion stroke: 250 mm Number of cushion cylinders: 3 Number of Plunger guide: 4 Moving bolster left to right Hydraulic overload system YES Weight approx.: 320 t Year of Retrofitting � retrofitted in 1997 and a transfer and handling robot have been installed, further the press was electrical retrofitted in 2009 with a new SIEMENS S7

723

ID	MA32196
Make	Verson
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton, Bolster area: 62" x 36" Slide area: 52" x 34" Stroke: 10" Slide adjustment: 5" Shut height: 32" SDAU right Speed: 25-50 SPM (variable speed)

724

ID	MA32170
Make	Arisa
Model
YOM	1979
Condition	Good Condition
Photo	See Photo
CAPACITY: 1250 TM TABLE: 1050 X 1220 MM CLOSING HEIGHT: 800 MM STROKE: 400 MM SLIDE ADJUSTMENT: 150 MM TABLE THICKNESS: 240 MM 30 GOLPES / MIN,

725

ID	MA32168
Make	Arisa
Model
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY:630 TON TABLE: 780 X 780 MM CLOSING HEIGHT: 800 MM STROKE: 400 MM SLIDE ADJUSTMENT: 170 MM PASS BETWEEN MONTANTS: 1120 MM TABLE THICKNESS: 250 MM POWER: 55 KW N� OF BLOWS PER MINUTE 20

726

ID	MA32167
Make	Arisa
Model
YOM	1981
Condition	Good Condition
Photo	See Photo
CAPACITY : 400 TON TABLE: 750 X 800 MM CLOSING HEIGHT: 475 MM STROKE: 300 MM SLIDE ADJUSTMENT: 150 MM TABLE THICKNESS: 200 MM 20 BLOWS / MIN.

727

ID	MA32166
Make	Arisa
Model
YOM	1978
Condition	Good Condition
Photo	See Photo
CAPACITY :800 TM TABLE : 1050 X 1220 MM HEIGHT CLOSING / CLOSING HEIGHT:800 MM STROKE: 400 MM CAR ADJUSTMENT / SLIDE ADJUSTMENT: 150 MM TABLE THICKNESS / TABLE THICKNESS: 225 MM 30 BLOWS / MIN.

728

ID	MA32155
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : Mechanical Press Stroke : 500 mm Die Height : 900 mm SPM : 15-30 Adjust 200 mm Bolster : 4000 x 1400 mm Slide : 4000 x 1400 mm Machine Type : Uncoiler Leveler Feeder Make : Orii Coil Weight : 5000 kgs Strip Thickness : 6.0 mm Strip Width : 800 mm

729

ID	MA32149
Make	AIDA,Japan
Model	NC1-2000(2)E
YOM	2010
Condition	Good Condition
Photo	See Photo
Capaciy: 200 ton, Stroke length: 250 mm, Stroke per minute: 25~45 s.p.m. Die height: 450 mm, Slide adjustment: 110 mm, Slide area: 880 x 650 mm, Bolster area: 1390 x 840 mm

730

ID	MA32148
Make	Fukui
Model	MDE-400
YOM	1982
Condition	Good Condition
Photo	See Photo
Limit of capacity 4,5 mm Slide stroke 200 mm Speed: 15-50 spm Slide adjustment 150 mm Die height 450 mm Slide area 1500 x 1500 mm Bolster area 1500 x 1500 Complete line: uncoiler, leveler, feeder, coiler

731

ID	MA32138
Make
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
C Frame Capacity : 2500 kN Course of slider : 500 mm Distance between table and slider : 800 mm Table size : 1000 x 630 mm Main motor power : 18.5 kW Dimension : 1250 x 170 x 3150 mm Press weight : 10940 kg

732

ID	MA32137
Make	SCMB
Model	PHS350
YOM	2001
Condition	Good Condition
Photo	See Photo
C Frame Press Stroke : 1000 mm Daylight : 1200 mm Ram Size : 1600mm x 735mm Table Size : 2200 x 1200 mm Main motor 30 kW Speed in fast approach : 40mm/sec Maximum working speed : 0.5-19.5mm/sec Return speed : 50mm/sec Return force : 51 ton Noise level : Inf75 Dba Shut off time : 45 mill.sec Oil Qty : 406 liter Approx size : 4175mm x 2000mm x 5200mm

733

ID	MA32136
Make	Emanuel
Model
YOM
Condition	Good Condition
Photo	See Photo
Hydraulic C Frame Hydraulic press at the neck of the swan Emanuel 300 ton Piano mm 1000x1000 Mazza mm 700x700 Corsa mm 550 circa It lights up to the PMS mm 900 circa Motore Kw 55 Extractor inferior and hydraulic superiore Dimensions Height mm 4200 Width 1300 mm Depth mm 2500 Weight tone 30 C Frame Hydraulic Emanuel 300 ton Press Lower Table mm 1000x1000 Upper Table mm 700x700 Piston stroke mm 550 approx. Vertical Light mm 900 approx. Motor Power 55 Kw Lower and upper hydraulic extractor Total Height mm 4200 Total Widht mm 1300 Total Depht mm 2500 Weight ton 30

734

ID	MA32123
Make	Litostroj,Slovenia
Model	HVC-2-250
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity of slider: 250-2500 kN Course of slider: 800 mm Capacity of pillow: 100-1000 kN Course of pilow: 320 mm Table size: 1250 x 1000 mm Pilow size: 800x800 mm Down speed of slider: 250 mm/s Up speed of slideR: 250 mm/s Slider speed: 8-50 mm/s Speed of pillow: 50 mm/s Refueling volume of working liquid: 1000 l Main motor power: 60 kW Dimension: 1600 x 3200 x 4800 mm Press weight: 25 tons

735

ID	MA32122
Make	WMW Erfurt,Germany
Model	PEEII250
YOM	1984
Condition	Good Condition
Photo	See Photo
250 ton, Length of worktable area: 1200 mm, Width of working table area: 800 mm,slide stroke:40-160 mm, no. of slide strokes:50 min, table dimensions: 1250 x 800 mm, slide dimensions: 670 x 900 mm, slide adjustment: 110 mm, shut height: 500 mm, main motor output: 22 kw, dimensions l x w x h: 1445 x 2680 x 3275 mm, machine weight:17,500 kg

736

ID	MA32121
Make	USSR
Model	P6334
YOM	1993
Condition	Good Condition
Photo	See Photo
C frame Capacity: 250 ton

737

ID	MA32120
Make	Seoul
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -200 ton Stroke9.84 " (250 mm) Die Height19.69 " (500 mm) S.P.M (R.P.M)25-30 spm Bolster Area57.09 " X 31.5 " X 7.48 " (1450 mm X 800 mm X 190 mm) Slide Area43.31 " X 29.92 (1100 mm X 760 mm) Slide Adjustment4.33 " (110 mm) Main Motor15 kw

738

ID	MA32119
Make	Arisa
Model	G2-250-S
YOM	1977
Condition	Good Condition
Photo	See Photo
PRESS DESIGN drive system eccentric / crank frame design C-frame, double sided number of suspensions 2 number of slide actions 1 table cushion yes PRESS FORCES total force (nominal) ( 2500 kN ) 250 to nominal work capacity ( 24130 BTU) 25400 kNm PRESS TABLE table surface (left-right) (95.348 " ) 2420 mm table surface (front-back) (42.946 " ) 1090 mm thickness of bolster plate ( 5.91 " ) 150 mm SLIDE slide force ( 2500 kN ) 250 to table surface (left-right) ( 82.74 " ) 2100 mm table surface (front-back) ( 35.46 " ) 900 mm stroke ( 7.88 " ) 200 mm stroke rate (max.) 25 /min SLIDE (MECHAN. PRESS) slide adjustment ( 6.895 " ) 175 mm autom. Slide adjustment yes stroke adjustment no main drive power (32.184 hp ) 24 kW DIE CUSHION (TABLE CUSHION) number of cushions 1 cushion force ( 160 kN ) 16 to stroke ( 3.94 " ) 100 mm working principle pneumatical TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC (16.745 " ) 425 mm throat (C-frame) (20.882 " ) 530 mm distance between columns (H-frame) ( 59.1 " ) 1500 mm ELECTRICAL SPECIFICATIONS mains voltage 380 V mains frequency 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right- (100.67 " ) 2555 mm space requirements -front/back- (104.41 " ) 2650 mm total height (169.42 " ) 4300 mm total weight approx. ( 66150 lb ) 30000 kg ATTACHMENTS (PRESSES) safety guard / safety door yes vibration damping elements 4

739

ID	MA32076
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton Stroke : 600 mm SPM : 14 Die Height : 600 mm Bolster : 2130 x 1870 mm Slide : 1900 x 1200 mm Adjust : 200 mm Die Cushion : 50 ton Cushion stoke : 300 mm Pad : 810 x 880 x 2

740

ID	MA32038
Make	AIDA,Japan
Model	TMX500
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton Stroke: 450 mm Die Height: 800 mm SPM: 25 Bolster: 3580 x 1250 mm Slide: 3580 x 1250 mm Die Cushion: 100 tons Cushion Stroke: 160 mm

741

ID	MA32031
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton Stroke:500 mm Die Height: 900 mm SPM: 15 - 30 Adjust: 200 mm Bolster: 4000 x 1400 mm Slide: 4000 x 1400 mm

742

ID	MA31891
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type Eccentric Drive Press Stroke 400 mm Die Height 860 mm SPM 15 - 25 Adjust 400 mm Moving Bolster 2000 x 1000 mm Slide 2000 x 1000 mm Side Opening 1100 mm Die Cushion Capacity 48 ton Die Cushion Type 1Pad, 2 Cylinders Pad Size 1500 x 580 mm Die Cushion Stroke 150 - 280 mm Die Cushion Stroke 280 mm Motor 45 Kw

743

ID	MA31863
Make	Weingarten
Model	VK2000.43.85
YOM
Condition	Good Condition
Photo	See Photo
Capacity � 2000 Metric Tons / 2200 Tons (USA) Stroke � 33� SPM � 8 to 15 (Variable) Bed size � 160� x 86� (Can be increased to 170� L-R) Shut height � 59� (Over bolster) Adjustment � 14� Windows Cushions (bed and ram) Very good condition Overhauled in 2005 Upgraded Siemens controls Includes Disassembly and electrical and mechanical match-marking

744

ID	MI7050
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:250 ton Bed Size : 2000 mm x 1220 mm Slide Area : 1850 mm X 1000 mm Stroke Length : 300 mm Shut Height : 850 mm Strokes per minute : 28 Ram Screw Adjustment : 150 MM Die Cushion : Twin Die Cushion

745

ID	MI7049
Make	Colishaw Walkar UK
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity . 800 Tons Bed.. 3350 x 2100 Stroke.. 600 MM Shut.. 1050 MM Adjustment.500 MM Motorized SPM.. 18 Cushion. YES TWIN DIE CUSHION Main Motor .150 HP Machine Weight 180 Tons Tie Rod Frame ,8 Point Gibs

746

ID	MI7048
Make	OKK,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
H frame press Cap.: 600 Tons Stroke Length: 500 mm Bolster Area: 3000 x 1620 mm Slide Area: 2820 x 1600 mm Die Height: 800 mm SPM: 15 Under Loading Condition Slide Adjustment: 350 mm Type: 4 Suspension Press Moving Bolster System Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 T 250 mm Stroke Pad Area 2450 x 1250 mm Capacity POWER 55 KW + 5 KW

747

ID	MI7047
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
H Frame Press Link Motion Capacity: 600 ton Stroke Length: 605 mm Bolster Area: 3050 x 1700 mm Slide Area: 3050 x 1700 mm Die Height: 1200 mm SPM: 15 Under Loading Condition Slide Adjustment: 600 mm Type: 2 Suspension Link Drive Press Moving Bolster System: Mounted (Move To Right Side) Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 T 250 mm Stroke Pad Area 2450 x 1250 mm Capacity

748

ID	MI7046
Make	Verson Wilkins
Model
YOM
Condition	Good Condition
Photo	See Photo
H Frame Press Cap.: 500 Tons Stroke Length: 400 mm Bolster Area: 3100 x 1600 mm Slide Area: 3100 x 1600 mm Die Height: 1000 mm SPM: 20 Under Loading Condition Slide Adjustment: 300 mm Type: 2 Suspension Die Cushion: Mounted 1 Pad 2 Cylinder Type 150 Tons 140 mm

749

ID	MI7045
Make	Shimomaru Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:500 ton Bolster :2500 x 1500 mm Slide :2500 x 1500 mm Stroke: 450 mm SPM: 15 Adjust :350 mm Die Height: 1100 mm Main Motor: 30 Kw Die Cushion: 50 x 2 tons Cushion Stroke :230 mm Cushion Pad :1100 x 920 x 2

750

ID	MA31822
Make	WMW Erfurt,Germany
Model	PKZZIII315.1FS
YOM
Condition	Good Condition
Photo	See Photo
Max. capacity: 315 tons Table size: 2500x1400 mm Double column crank

751

ID	MI7043
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
MOVING BOLSTER CRANKLESS PLUNGER GUIDED Capacity 400 ton Stroke 300 mm SPM 20 - 60 Die Height 700 mm Adjust 200 mm Moving Bolster 2300 x 1500 mm x 2 Slide 2300 x 1500 mm Die Cushion 60 ton Cushion Stroke 150 mm Pad 1800 x 1000 mm

752

ID	MA31818
Make	Wasino,Japan
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
Net weight : 42.000kg 300 Ton Technical Details Attached In Photo

753

ID	MA31787
Make	WMW Erfurt,Germany
Model	PD2HH400-250TS
YOM	1987
Condition	Good Condition
Photo	See Photo
Total capacity: 650 ton, Inner ram capacity: 400 ton, Inner ram stroke: 800 mm, Outer ram capacity: 250 ton, Outer ram stroke: 630 mm, Idle stroke rate 12,5.25 Min. shut-height of inner ram: 1200 mm, Max. shut-height of inner ram: 1600 mm, Min. shut-height of outer ram: 1100 mm, Max. shut-height of outer ram: 1500 mm, Bed dimensions: 3200 x 2000 mm, Inner ram dimensions: 2640 x 1460 mm, Outer ram dimensions: 3200 x 2000 mm, Die cushion stroke: 250 mm, Die cushion holding capacity: 80 ton Die cushion ejection capacity: 80 ton Main motor power:186 kW

754

ID	MA31775
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 125 ton, Stroke: 75 mm, Die height: 350 mm, Adjust: 50 mm, SPM: 80-200 Bolster: 1100 x 800 mm, Slide: 970 x 700 mm, Mail motor: 18.5 kw Transfer feed stroke: 200 mm, Clamp stroke: 100 mm

755

ID	MA31764
Make	Spiertz
Model
YOM	Fully reconditioned in 2001
Condition	Excellent condition,under power
Photo	See Photo
Capacity:1250 ton Stroke:762 mm Stroke/min.:18 Slide regulation:610 mm Hydraulic overload:YES Distance between the columns: 4.320 mm Lateral Moving Table: 4.200 mm x 2.320 mm Lateral windows: 2.400 mm PLC : Siemens Cushion: YES Weight : 300 Ton ( approx. ) The press is complete of Automatic Transfer line with 2 robots

756

ID	MA31739
Make	Hikari
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Stroke: 200 mm, Die height: 500 mm, SPM: 60, Bolster space: 2000 x 1000 mm, Slide adjust: 100 mm, Main motor: 45 Kw his H beam processing line is now available, consisting of a 400 ton H frame press, conveyors, feeders and dies. The line is set up to automatically process the beams, and therefore the press does not have a bolster. However, if the dies are removed, then a 2000 x 1000 mm bolster could be added.

757

ID	MA31738
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
C frame press, Capacity: 150 ton, Stroke: 175 mm, Die height: 340 mm, SPM: 30-55 Adjust: 100 mm, Bolster: 1250 x 750 mm, Slide: 700 x 550 mm

758

ID	MA31737
Make	Shimomura
Model
YOM	1985
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 500 ton Die Height: 1100 mm Stroke: 450 mm SPM : 15 Adjust: 300 mm Bolster: 2500 x 1500 mm Die Cushion: 50 ton x 2 Cushion Stroke: 225 mm Cushion Pad: 1100 x 920 mm x 2

759

ID	MA31728
Make	Mori Tekko
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Bolster: 2500 x 1500 mm, Slide: 2500 x 1500 mm, Stroke: 550 mm, SPM: 15 Adjust: 150 mm, Die height: 900 mm, Die cushion: 80 ton

760

ID	MA31714
Make	Erfurt
Model	PKZZI1250-4000
YOM
Condition	Good Condition
Photo	See Photo
Nominal capacity 1250t Slide stroke 630mm Number of strokes 11 Die height 1165mm Bolster 4000x1800mm

761

ID	MA31710
Make	USI Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 1500 ton Bed Size � 144� x 96� Stroke � 32� SPM � 9 (Can be increased and made variable) Shut height � 48� (SDAU, Over bolster) Adjustment � 12� Cushion (250 Tons, 16� Stroke) Windows � 60� wide Rolling bolster (front-to-back) 150 HP Main Motor (2) Presses Available

762

ID	MA31709
Make	Erfurt
Model	PKZZI1250/4000
YOM	1975
Condition	Good Condition
Photo	See Photo
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 tons Slider force at the distance of 250 mm in the lower dead point: 350 tons Number of single strokes per minute: 11 Slider stroke: 630 mm Slider adjustment: 630 mm The closed height: 1165 mm Table pillow: -Max. stroke: 250 mm -Stroke adjustment: 250 mm -Max. holding force: 250 tons -Max. ejection force: 40 tons Table dimensions: 4000x1800 mm Bolster dimensions: 3950x1800 mm Table gap: 3750x1300 mm Main motor power: 132 kW Stay spacing: 4000 mm Press weight: 215000 kg I don't have a packing list for this press. There is only the weight of large parts of the press. Weight of a table in assembly with an exhaust pillow and a plate of a pusher: 42600 kg Weight of a table (without built in details): 27400 kg Weight of an exhaust pillow: 3000 kg Weight of a plate of a pusher: 5400 kg Weight of a lateral rack in assembling: 8000 kg Weight of a cross-arm in assembling: 44000 kg Weight of a cross-arm without built in details: 24800 kg Weight of the top part of a cross-arm: 7800 kg Weight of a shaft of a flywheel with a pine forest with a muff and brakes: 16900 kg Weight of a slider in assembling: 33600 kg Weight of coupling bolts: 3400 kg

763

ID	MA31700
Make	AIDA,Japan
Model	PDA400
YOM	1979-1983
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Bolster:2150 x 1000 mm, Slider: 2150 x 1000 mm, Stroke: 75 mm, Number stroke: 40-150 per minute

764

ID	MA31695
Make	Blow
Model	SC2-300-72-42
YOM	1994
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Area of bed: 1050 x 1800 mm, Area of ram: 1050 x 1800 mm, T slotted Stroke: 300 mm, Shut height: 800 mm, Ram adjustment (power): 250 mm, Speeds: 30/60 SPM, Windows: 800 x 1000 mm, Bloster: 175 mm, Floor to top of bed: 975 mm, Floor standing: Yes, Tie rod construction: Yes, Air clutch: yes, Air brake: yes, Palm buttons and press conrols: yes, Main motor : 50 horsepower

765

ID	MA31670
Make	Schuler German
Model	P2E2Sq250/2,3/04
YOM	1971
Condition	Good condition,under power
Photo	See Photo
Capacity: 250 ton, Ram stroke: 460 mm, Ram adjustment: 300 mm, Distance between columns L-R: 2360 mm, Table surface area: 2.300 x 1.300 mm, Slide surface area: 2300 x 1300 mm, Shut height (S.D.A.U.): 800 mm, Number of strokes: 16-24 spm, Bolster height over floor: 650 mm, Cushion capacity at press 82,83 and 87: 42 ton, Cushion capacity at press 85 and 86: 46 ton, Cushion stroke: 210 mm, Number of cushion cylinders: 2 Weight approx: 104 ton Quantity:5 nos

766

ID	MA31651
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Stroke: 400 mm, Die height: 860 mm, SPM: 15-5 Adjust: 400 mm, Moving bolster: 2000 x 1000 mm, Slide: 2000 x 1000 mm, Side opening: 1100 mm, Die cushion capacity: 48 ton, Die cushion type: 1 pad, 2 cylinders, Pad size: 1500 x 580 mm, Die cushion stroke: 150-280 mm, Die cushion stroke: 280 mm, Motor: 45 Kw, Quantity: 3 nos, Including robot, Each press has 2 moving bolsters, horizontal movement and die cushions.

767

ID	MI7015
Make	Verson
Model	SEI-600-48-48T
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 600 Ton Ram Stroke : 24" Shut Height : 58" No. of Stroke per Min. : 15" Bolster plate to ram adjustment : 6" Bed Dimension : LR 48"x FB 48" Ram Dimension : LR 48" x FB 48" Bottom Ejector Stroke : 4.5" Upper Ejector Stroke : 3" Bolster Plate Thickness : 25" Main Drive Motor Power (HP) : 100 Main Drive Motor RPM : 1100

768

ID	MA31632
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
H frame press Capacity: 200 ton, Bolster: 2000 x 1220 mm, Slide: 1830 x 1000 mm, Stroke: 300 mm, SPM: 15-25 Die height: 800 mm, Adjust: 430 mm, main motor: 22 Kw, Die cushion: 16.7 x 2 cushion stroke: 150 mm, Cushion adjust: 150 mm, Cushion pad: 700 x 700 mm

769

ID	MA31627
Make	Wasino,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
C frame press Capacity: 100 ton, Stroke: 170 mm, Die height: 400 mm, SPM: 20-50 Adjust: 75 mm, Bolster: 1700 x 600 mm, Slide: 1300 x 500 mm

770

ID	MA31619
Make	WMW Erfurt,Germany
Model	PKZ400/1000
YOM	1975-1982
Condition	Good Condition
Photo	See Photo
capacity: 400 tons, Stroke: 400 mm, Table size (left to right): 1000 mm, Table size (front to back): 1320 mm, Ram (left to right): 800 mm, Ram ( front to back): 1060 mm, Ram adjustment: 200 mm, Strokes : 18 min^-1 Shut height: 685 mm, Driving power: 32 kW, Driving power overall: 38 kW, Required space: 2550 x 2700 mm, height of machine above floor: 6300 mm, Upper ejector number / power: 20 t/125 mm, Total weight: 33800 kg, Quantity: 6 nos

771

ID	MA31595
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton Stroke: 250 mm SPM: 20 - 60 Die Height: 850 mm Adjust :300 mm Bolster : 3000 x 2200 mm Machine Type: Uncoiler Leveler Feeder Make : Fukui Material Thickness: 0.5 - 1.6 mm Material width: 500 - 1830 mm Feed Stroke: 2500 mm Feed SPM: 60 Feed Speed : 120 M/min (Max) Motor: 22 Kw

772

ID	MA31591
Make	Amada
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type: C Frame Press Capacity: 200 ton Stroke: 203.2 mm SPM: 20 - 40 Die Height: 675.8 mm Adjust :100 mm Bolster:2320 x 740 mm Slide:1800 x 650 mm Die Cushion:Front 3.2 Rear 2.8 ton Cushion Pad :100 x 350 mm x 2

773

ID	MA31589
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type Transfer Press Make Aida Capacity 300 ton Stroke 350 mm Die Height 700 mm SPM 20 - 40 Maximum Drawing Depth 120 mm Adjust 100 mm Bolster 2500 x 1000 mm Slide 2500 x 1000 mm Die Cushion Capacity Stage 1 & 2 10 tons Stage 3, 4, 5, 6 & 7 5 tons Die Cushion Stroke 120 mm Transfer Unit Feed Stroke 350 mm Clamp Stroke 120 mm Lift Stroke 60 mm Finger Bar Width 20 - 40 Spm 500 - 600 mm Stages 7

774

ID	MA31585
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton Stroke: 200 mm Die Height: 600 mm SPM: 35 Adjust : 200 mm Bolster: 2250 x 1300 mm Slide: 2250 x 1200 mm

775

ID	MA31507
Make	WMW,Fritz Heckert
Model	PKZ 400/1000
YOM	1979
Condition	Good Condition
Photo	See Photo
Pressure - 400tones Slider's travel - 315mm Slider's shift - 200mm Weight - 38500kg

776

ID	MA31476
Make	Erfurt
Model	PKZZI2000
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity: 1250 ton, Centers of pressure: 2 idle stroke rate: 11 Distance between the uprights: 4000 mm, Shut height: 1165 mm, Table dimensions: 4000 x 1800 mm, Table gap: 37050 x 1300 mm, Ram dimensions: 3950 x 1800 mm, Ram stroke: 630 mm, Ram adjustment: 630 mm, Die cushion capacity: 250 ton, Greatest depth of extraction: 250 mm, Main motor power: 132 kW, Press weight: 215000 kg.

777

ID	MA31422
Make	Baba
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type Mechanical High Speed Press Make Baba Capacity 200 ton SPM 32 Stroke 200 mm Die Height 350 mm Adjust 80 mm Bolster 1300 x 800 mm Mail Motor 15 Kw 4p

778

ID	MA31421
Make	Baba
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type Mechanical Press Make Baba Capacity 250 ton SPM 32 Stroke 200 mm Die Height 430 mm Adjust 100 mm Bolster 1000 x 1000 mm Slide 520 x 570 mm Main Motor 22 Kw 4p

779

ID	MA31415
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 200 ton Stroke 150 mm Die Height 550 mm Adjust 100 mm SPM 40 - 100 Bolster 1500 x 1100 mm Slide 1500 x 900 mm Mail Motor 30 kw

780

ID	MA31405
Make	Verson
Model
YOM	one unit approx. 1978 & one unit approx. 1971
Condition	Good Condition
Photo	See Photo
1. VERSON 600 TON STRAIGHT SIDE SINGLE CRANK PRESS FROM PLANT LIQUIDATION TO ONGOING OPERATION MODEL SE1-600-48-48 SERIAL NUMBER 25425 STK#103647 APPROX. DATE OF MEG. 1978 ================================ SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION TO BUYER; CAPACITY 600TON BED AREA 48'' x 48'' RAM AREA 48''x 48'' STOKE 24'' SHUT HEIGHT 58'' ADJUSTMENT 6'' SPEED 15-25 SPM BOLSTER APPROX . 10 THICK WINDOWS IN SIDE COLUMNS EQUIPPED WITH: AIR CLUTCH AIR BRAKE VARIABLE SPEED JIC CONTROL PANEL 2. VERSON 600 TON STRAIGHT SIDE SINGLE CRANK PRESS FROM PLANT LIQUIDATION TO ONGOING OPERATION MODEL SE1-600-48-48 SERIAL NUMBER 23891 STK#103648 APPROX. DATE OF MEG. 1971 ================================ SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION TO BUYER; CAPACITY 600 TON BED AREA 48'' x 48'' RAM AREA 48''x 48'' STOKE 24'' SHUT HEIGHT 58'' ADJUSTMENT 6'' SPEED 15-25 SPM BOLSTER APPROX . 10 THICK WINDOWS IN SIDE COLUMNS EQUIPPED WITH: AIR CLUTCH AIR BRAKE VARIABLE SPEED JIC CONTROL PANEL

781

ID	MA31404
Make	Weingarten
Model
YOM	Rebuilt 2004
Condition	Very good condition
Photo	See Photo
Capacity � 1000 Metric Tons / 1100 Tons Stroke � 33�-838mm SPM � 8 to 15 (Variable) Bed size � 157� x 86�-3987 x 2184mm Shut height � 59� (Over bolster)-1498mm Adjustment � 14�-355mm Windows Cushions (bed and ram) (3 unit machines 2 are sold)

782

ID	MA31401
Make	Bliss
Model	SE4-800
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 Tons Stroke: 24" Shut Height, SDAU: 80" Adjustment: 20" Bed Area: 108" LR x 80" FB Ram Size: 108" LR x 80" FB Speed: 22 SPM

783

ID	MA31399
Make	Weingarten
Model	VK1000.43.85
YOM	Mechanically rebuilt in 2005
Condition	Very good condition
Photo	See Photo
Capacity � 1000 Metric Tons / 1100 Tons Stroke � 33� (850mm) SPM � 8 to 15 (Variable) Bed size � 160� x 86� (4000mm x 2200mm) (171� / 4380mm between the uprights) Shut height � 59� / 1500mm (Over bolster) Adjustment � 14� (350mm) Windows � 71� (1800mm) wide Bed Cushions � 288 Metric tons, 0-300mm stroke, Pneumatic, adjustable Slide Ejector Cushions � 100 Metric tons, 150mm stroke Hydraulic Overloads Quantity-3

784

ID	MA31368
Make	Spiertz
Model	Tandem
YOM
Condition	excellent working condition
Photo	See Photo
Type : n. 4 ( four ) plunger Force : 600 Ton. Stroke : 600 mm Stroke /min. : 18 Moving bolster dimension 2.950 mm x 1.670 mm Slide dimension : 3.000 mm x 1.670 mm Hydraulic overloading protection Daylight : 1.300 mm Lateral windows : 1.720 mm complete of n.2 ( two ) lateral moving bolster Cushion : NO The 4 machines are still available, very very nice condition, modern electrical cabinets , last retrofit from 2004 up to 2009 and then very few used.

785

ID	MA31362
Make	WMW Erfurt,Germany
Model	PKZZIII250.1FS
YOM
Condition	Good Condition
Photo	See Photo
Capacity, ton 250 Centers of pressure 2 Idle stroke rate 12 Distance between the uprights, mm 2525 Shut height, mm 1080 Table dimensions, mm 2500 x 1400 Ram dimensions, mm 2450 x 1400 Ram stroke, mm 400 Ram adjustment, mm 400 Die cushion stroke, mm 120 Counter pressure of cushion, ton 50 Die cushion ejection pressure, ton 10 Main motor power, kW 41 Press weight, kg 33000 Quantity -4 no.

786

ID	MA31342
Make	Schuler
Model	S4-1500-210-96
YOM
Condition	Good Condition
Photo	See Photo
Bed Size : 212" x 96" Slide Size : "210 x 96" Stroke : 36" Adjustment : 20" (Motorized) Shut Height : 54" SDAU Speed : 10-24 SPM

787

ID	MA31338
Make	Erfurt
Model	PKZZ500.1
YOM
Condition	Good Condition
Photo	See Photo
Model PKZZ(IV) 500/2800 Two presses are for sale Table size, mm 2800 x 1800 Ram size, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Strokes per minute 20/25 Shut-height, mm 1100 Distance between columns, mm 2800 Stroke of cushion plate, mm 200 Counter pressure of cushion in bed, ton 100 Motor capacity, kW 75 Equipped with side moving bolsters

788

ID	MA31337
Make	Erfurt
Model	PKZZ500.1
YOM
Condition	Good Condition
Photo	See Photo
Model PKZZ IV 500.1 Two presses are for sale Table size, mm 2800 x 1800 Capacity, ton 500 Ram size, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Strokes per minute 20 Shut-height, mm 1100 Distance between columns, mm 2800 Stroke of cushion plate, mm 200 Counter pressure of cushion in bed, ton 100 Motor capacity, kW 75 Equipped with moving bolsters

789

ID	MA31336
Make	Erfurt
Model	PKZZ500/2800
YOM
Condition	Good Condition
Photo	See Photo
Model PKZZ IV 500.1 Two presses are for sale Table size, mm 2800 x 1800 Capacity, ton 500 Ram size, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Strokes per minute 20 Shut-height, mm 1100 Distance between columns, mm 2800 Stroke of cushion plate, mm 200 Counter pressure of cushion in bed, ton 100 Motor capacity, kW 75 Equipped with side moving bolsters

790

ID	MA31332
Make
Model	PD-20
YOM
Condition	Good Condition
Photo	See Photo
Capacity ：　300t Stroke Length ：　300mm SPM ：　34 Bolster ：　2000 x 1220mm Slide ：　1830 x 1000mm Die Height ：　820mm Slide Adjust ：　400mm

791

ID	MA31331
Make	Komatsu
Model	OBW200 K2
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 200t Stokes : 20~40 spm stroke length : 250 mm Die Height : 520 mm Slide adj. : 120 mm Slide : 1850 x 650 mm Bolster : 2400 x 800 x 130

792

ID	MA31330
Make	Schuler
Model
YOM
Condition	Excellent
Photo	See Photo
excellent condition Man: SCHULER Force : 320 Ton. Stroke : 400 mm Stroke/min: 30 Slide regulation: 450 mm Daylight : 1.150 mm Frontal passage : 2.200 mm Table : 2.130 mm x 1.220 mm Slide : 2.130 mm x 1.220 mm Cushion : NO composed by 4 ( four ) single action presses & robot COMAU

793

ID	MA31325
Make	AIDA
Model
YOM
Condition	excellent working condition
Photo	See Photo
Capacity 200 ton stroke 150 mm SPM 60 - 150 Die Height 550 mm Adjust 100 mm Bolster 1500 x 1100 mm Slide 1500 x 900 mm Main Motor 30 Kw having had regular maintenance Machine Type high Speed H Frame Press

794

ID	MA31314
Make	AIDA
Model	NC2 2000
YOM	2011
Condition
Photo	See Photo
Capacity- 220 US Tons, Slide Stroke length- 150 mm, Strokes per minute- 40 to 80 spm, Slide adjusment- 110 mm, Maximum die height-450 mm, Bolster thickness- 170 mm, Slide area ( L-R X F-B)- 1850 x 650 mm, Bolster area- 2420 x 680 mm, Throat depth- 350 mm, Floor to top of bolster ( without mounts)- 1000 mm, Overall height- 3615 mm, Bed opening ( L-R X F-B) -1920 X 360 mm, Distance between frames- 1910 mm, Floor space ( L-R X F-B) - 2260 X 2160 mm, Drive Motor- 22 kW - 1650 rpm, Standard Voltage- 480 V/3 ph/60 Hz

795

ID	MA31307
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity -200 ton Stroke-203.2 SPM-20 - 40 Die Height-675.8 mm Adjust-100 mm Bolster-2320 x 740 mm Slide-1800 x 650 mm Die Cushion- Front 3.2 Rear 2.8 ton Cushion Pad-100 x 350 mm x 2

796

ID	MA31286
Make
Model	S4-800-108-60QDC
YOM
Condition	Good Condition
Photo	See Photo
USI CLEARING 800 TON PRESS Model S4-800-108-60 Capacity � 800 Tons Bed size � 108� x 60� Stroke � 30� Shut height � 61� (SDAU) Adjustment � 20� SPM � 18 Windows Cushions (2 @ 108 Ton total capacity, 7� stroke) Rolling bolster (through columns) May be inspected in plant (4) Available

797

ID	MA31281
Make	AIDA,Japan
Model	PDA80L
YOM	1991
Condition	Good Condition
Photo	See Photo
Machine name : PDA-80L Serial No. : 12800-0732 Manufacturing year : 1991 Machine Capacity : 80tf Slide Stroke : 25mm Slide Strokes per minute : 160〜400 Die Height : 300mm Slide Adjust : 50mm Slide L.RxF.B : 800x450 Bolster L.RxF.B : 900x600 Voltage : 200V

798

ID	MA31277
Make	Komatsu
Model
YOM	1998
Condition	Good Condition
Photo	See Photo
Tandem Press line Bolster area : 4000 x 2150 mm for 1000 tons 3400 x 2000 mm for 600 tons Die height : 1500 mm for 1000 tons 1620 mm for 600 tons Slide stroke : 600 mm for 1000 tons 750 mm for 600 tons SPM : 12-18 Meters Die cushion , moving bolster ,dry type clutch and brake PLC Touch screen

799

ID	MA31271
Make	ISIS
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
High Speed Press Machine Type : 82080SH Serial No : 056 Capacity : 80 ton Stroke Length : 30 mm SPM : 150-400 Slide Adjust : 50mm Die Height : 300mm Bolster Area : 900x650x160mm Bed Opening 650x200mm TS130msec

800

ID	MA31270
Make	ISIS
Model
YOM	1986
Condition	Good Condition
Photo	See Photo
High Speed Press Machine Type: 83060 Serial No : U60 032 Capacity : 60 ton Stroke Length : 25 mm Slide Adjust : 30mm Die Height : 250mm Bolster Area : 800x580x145mm Bed Opening : 600x180mm TS : 230msec

801

ID	MA31259
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 500 t Shut Height : 1220 mm Slide adjustment : 325 mm Stroke : 835 mm Slide dimensions : 2750 x 1500 mm Bolster plate (bed) dimensions : 2750 x 1500 mm Height between bed to floor : 250mm Bed cushion tonnage : 140 t Bed cushion stroke : 250 mm Strokes per minute : 12 to 24 spm Air pressure : De 5 to 7 kg/cm2 Main engine power : 100 kW Automatism circuits : 3 Moving bolster : Front single bolster movement This line 4 Schuler presses available Robots for available SP. : 15,000 CP : 11,000

802

ID	MA31257
Make	EDELHOFF
Model	AZR250
YOM	1976
Condition	Good Condition
Photo	See Photo
Technical details Dimension Unit table surface area 1100 x 850 mm pressure 250 t throat 400 mm stroke 20 - 160 mm ram adjustment 75 mm no. of strokes 34 Hub/min ram surface 800 x 540 mm tool shank hole (depth x diameter) 65 x 105 mm hole in the table 300 x 240 mm weight 16,7 t table height over floor 720 mm shut height (stroke down, adjustm. up) 500 mm total power requirement 18,5 kW weight of the machine ca. 15 t dimensions of the machine ca. 2,7 x 1,5 x 2.9 m

803

ID	MA31254
Make	Schuler
Model
YOM
Condition	Good Condition
Photo	See Photo
Schuler Tandem press line four presses 4 Schuler 500 ton single action. Blanking station / transfer, All with rolling bolster left to right Table size 3000 mm x 1800 mm Stroke per minute 9-18

804

ID	MA31238
Make	AIDA,Japan
Model
YOM	1978
Condition	Good Condition
Photo	See Photo
Make : Aida Capacity : 300 ton Stroke : 75 mm Die Height : 600 mm Adjust : 80 SPM : 60-160 Bolster : 1700 X 1000 Slide : 1700 X 900 mm Mail Motor : 37 Kw

805

ID	MA31232
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : Aida Capacity : 300 ton Stroke : 450 mm SPM : 16 Bolster : 2500 x 1520 mm Slide : 2500 x 1420 mm Die Height : 800 mm Adjust : 200mm Die Cushion : Yes

806

ID	MA31231
Make	Kansai
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : Kansai capacity : 600 ton Stroke : 400 mm SPM : 10 Bolster : 3000 x 1500 mm Die Cushion : Yes

807

ID	MA31230
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : Aida Capacity : 300 ton Stroke : 350 mm SPM : 15-25 Bolster : 2500 x 1300 mm Slide : 2400 x 1000 mm Die Height : 700 mm Adjust : 100 mm Machine Type : Transfer Unit Feed Stroke : 400 mm Clamp Stroke : 100 mm SPM : 25 Finger Bar Width : 500 mm Stages : 6

808

ID	MA31220
Make	AIDA,Japan
Model	C2-20(2)
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton Stroke length ：250mm Stroke ：20-35spm Bolster size ：2420840mm Slide size ：1850650mm Die height： 500mm Motor ：22kw Weight- 25 tons

809

ID	MA31218
Make	IHI,Japan
Model
YOM	1984
Condition	Good Condition
Photo	See Photo
Capacity : 1000 ton Make : IHI Year : 1984 Points : 4 Stroke : 600 mm SPM : 8 � 18 Die Height : 1350 mm Adjust : 400 mm Slide : 4000 x 2000 mm Bolster : 4000 x 2000 mm Die Cushion : 100 ton Cushion Stroke : 200 mm Bolster : Two left to right moving bolster

810

ID	MA31213
Make	EDELHOFF
Model
YOM	1976
Condition	Good Condition
Photo	See Photo
Capacity: 250 tons Model : AZR table surface area : 1100 x 850 mm pressure : 250 t throat : 400 mm stroke : 20 - 160 mm ram adjustment : 75 mm no. of strokes : 34 Hub/min ram surface : 800 x 540 mm tool shank hole (depth x diameter) : 65 x 105 mm hole in the table : 300 x 240 mm weight : 16,7 t table height over floor : 720 mm shut height (stroke down, adjustm. up) : 500 mm total power requirement : 18,5 kW weight of the machine ca. : 15 t dimensions of the machine ca. : 2,7 x 1,5 x 2.9 m

811

ID	MA31212
Make	BETZ
Model
YOM	1980
Condition	Good Condition
Photo	See Photo
Type : FZL pressure : 300 t throat : 420 mm stroke : 30-140 mm table-size : 1100 x 850 mm no. of strokes : 32 Hub/min ram adjustment : 105 mm shut height (stroke down, adjustm. up) : 500 mm total power requirement : 15 kW weight of the machine ca. : 19,3 t dimensions of the machine ca. : 2 x 3 x 3,5 m

812

ID	MA31211
Make	Jelsingrad
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity 250 t C frame

813

ID	MA31194
Make	AIDA,Japan
Model	HMX-300(1)
YOM
Condition	Good Condition
Photo	See Photo
HMX Model Specifications (metric) Unit HMX-3000 Capacity kN 3000 Tonnage rating point (above B.D.C.) mm 3.2 Stroke length mm 30 Working energy: Min-Max spm J 3000 / 3000 Strokes per minute under no load spm 160 ~ 500 Micro-inching spm about 60 Die-height, slide to bolster mm Note 1 420~520 Slide adjustment mm 60 Slide area (L.R. x F.B.) mm 2000 x 750 Bolster area (L.R. x F.B.) mm 2000 x 1000 Bolster thickness mm Note 3 200 Bolster surface height above floor mm Note 4 (1000) Max upper die weight t 01.мар Side opening (F.B. x height) mm 560 x 420 Bed opening (L.R. x F.B.) mm 1700 x 400 Main motor kW 55 Power source V/Hz Note 5 200 / 50, 60 Dmjmt0t Required air pressure MPa 0.5

814

ID	MA31193
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Type : Crank motion two point press Model : TMX S2 8000(2) 360 120(S) Pressing force capacity : 8000 (Left 4000 kN, Right 4000 kN) kN(4) Capacity on each stage 1750 kN Rated tonnage point 13 mm Slide stroke length 510 mm Bb7mlwqgkp Continuous working energy 140 : at 12 spm (3) kJ Number of continuous strokes under no load 12 25 (2 and 3 dimensions) spm Micro inching Approx. 5 spm Die height 1000 mm Slide adjustment 100 mm Slide area: L.R.xF.B. 3600 x 1200 mm Bolster area: L.R.xF.B. 3600 x 1200 mm Bolster height 450 mm Floor level to top of bolster 450 mm Number of stages 8 stages Distance between stages 450 mm Drawing depth under 2 axes: 170 3 axes: 130 mm mm Maximum upper die weight 6 (including common plate) t Distance between inside columns 4400 mm Side opening 2400 mm Main motor DC 90 (Yaskawa make) kW Prime motor source AC 380V, 220V, 50Hz, 3 ?, 3W Voltage for main motor DC 400 V Voltage for other motors AC 200 (stepped sown with transformer) V Control circuit voltage AC 100, DC 24 V Required air pressure 0.5 (To be increased to 0.8 MPa by booster valve) MPa Ambient temperature 5~40 use only Celsius �C Environmental humidity 45~90 (No new drops) % Overall height above floor level Approx. 6900 mm

815

ID	MA31190
Make	AIDA,Japan
Model	NC2-200(2)
YOM	1997
Condition	Good Condition
Photo	See Photo
Capacity 2000 kN 200 tons Bed area 2420 mm x 840 mm 95� x 33� Slide area 1850 mm x 840 mm 73� x 33� Thickness of bolster 170 mm 6.5� Stroke 250 mm 10� Adjustment 110 mm 4� Shut height (SDAU) 500 mm 20� Variable speed 25-45 spm 25-45 spm Overall height above floor 3805 mm 12� 6� Approximate weight 27,000 kgs 27 tonnes Features Floor mounted, Dimenco double sided decoiler, Dimenco RMHS leveller (2015), roller tool loading system

816

ID	MA31184
Make	AIDA,Japan
Model
YOM	2007
Condition	never used
Photo	See Photo
Model : NC2-250 (1) Capacity : 250 Slide Stroke : 170mm strokes per minute : No Load 25-30 spm Die Height : 450 mm Slide Adjustment : 100 mm Slide Area : L.Rx F.B 2100 x 700 mm Bolster Area : L.R. x F.B 2700 x 760 mm Main Motor : 30 kW Required Air Pressure : 5 kgf/cm2

817

ID	MA31183
Make	AIDA,Japan
Model	NC2-200(1)
YOM	2007
Condition	never used
Photo	See Photo
Model : NC2-200 (1) Capacity : 200 Slide Stroke : 150 mm Strokes per minute No Load : 35-70 Die Height : 450 mm Slide Adjustment : 110 mm Slide Area : L.R x F.B 1850 650 mm Bolster Area : L.R. x F.B 2420 x 680 mm Main Motor : 22 kW Required Air Pressure : 5 kgf/cm2

818

ID	MA31182
Make	AIDA,Japan
Model
YOM	2007
Condition	never used
Photo	See Photo
Model : NC2-1600(2)E Slide Dimensions a1x b2 : 1500 x 580 Bolster Dimensions a2x b2 : 2040 x 760 Bolster Thickness : 165 Frame Gap b2x h3 : 390 x 700 Inside Dimension of Frame a3 : 1590 Height of Top of bolster above floor level h1 : 900 Overall Height h2 : 3260 Location of Anchor Bolts a4,a'4 : 1730, 1630 Installation Dimensions a6x b6 : 2360 x 2040 Operation Panel Dimensions a7 : 285 Bed Hole Dimensions (LR x FB) 1590 x 380 Approximate Machine Weight : 19 t

819

ID	MA31181
Make	AIDA,Japan
Model	NC1-200
YOM	1988
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton Stroke: 160 mm Speed: 35 ~ 70 spm Year 1988 Model : nc 1 200 Die height: 410 mm Adjustment: 110 mm Slide adjust: Motor Clutch type: Wet

820

ID	MA31179
Make	Spiertz
Model
YOM
Condition	Excellent
Photo	See Photo
Type : n. 4 ( four ) plunger Force : 600 Ton. Stroke : 600 mm Stroke /min. : 18 Moving bolster dimension : 2.950 mm x 1.670 mm Slide dimension : 3.000 mm x 1.670 mm Hydraulic overloading protection Daylight : 1.300 mm Lateral windows : 1.720 mm complete of : n.2 ( two ) lateral moving bolster Cushion : NO

821

ID	MA31175
Make	AIDA,Japan
Model	C2-20(2)
YOM	1979
Condition	Good Condition
Photo	See Photo
Stroke Length 250mm Stroke Number 20～35 Die Height 500mm Slide Adjust 110mm

822

ID	MA31174
Make	AIDA,Japan
Model	NC2-200(2)
YOM	1985
Condition	Good Condition
Photo	See Photo
Stroke length 250m Stroke Number 25～45 Die Height 450mm Slide Adjust 110mm With Die Cushion.

823

ID	MA31171
Make	AIDA
Model	NC1-20(2)
YOM	1983
Condition	Good Condition
Photo	See Photo
Manufacture : AIDA Country of origin : Japan Press Capacity : 200 ton Stroke length : 250 mm Stroke per minute : 25-45 s.p.m Die height : 450 mm Slide adjustment : 110 mm Slide area : 880x650 mm Bolster area : 1390x840 mm Motor power : 15 kW

824

ID	MA31170
Make	AIDA
Model	NC2-200(1)
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : C frame press Capacity : 200 ton Stroke : 150 mm SPM : 35-70 Die Height : 450 mm Adjust : 110 mm Bolster : 2420 x 680 mm Slide : 1850 x 650 mm Cushion Travel : 89 mm Main Motor : 22 Kw C frame presses are susceptible to cracking in the frame However, the press that we are offering has been especially reinforced by Aida with external tie rods and welded supports on the side of the frame to strengthen the structure.

825

ID	MA31168
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type C Frame Press Capacity 200 ton SPM 20 - 40 Stroke 250 mm Die Height 500 mm Adjust 105 mm Table 2400 x 800 mm Slide 1830 x 650 mm

826

ID	MA31162
Make	Erfurt
Model	PKZZ1250
YOM
Condition	Good Condition
Photo	See Photo
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton Slider force at the distance of 250 mm in the lower dead point: 350 ton Number of single strokes per minute: 11 Slider stroke: 630 mm Slider adjustment: 630 mm The closed height: 1165 mm Table pillow: -Max. stroke: 250 mm -Stroke adjustment: 250 mm -Max. holding force: 250 ton -Max. ejection force: 40 ton Table dimensions: 4000x1800 mm Bolster dimensions: 3950x1800 mm Table gap: 3750x1300 mm Main motor power: 132 kW Stay spacing: 4000 mm Press weight: 215000 kg

827

ID	MA31156
Make	AIDA
Model	PC20
YOM
Condition	Good Condition
Photo	See Photo
200 ton in working order. Press weight 24, 3T. Shut height 450 mm.

828

ID	MA31147
Make	Erfurt
Model	PKZZI2000
YOM
Condition	Good Condition
Photo	See Photo
Centres of pressure : 2 Maximum force of slide 20,000 kN Stroke of slide 630mm Adjustability of slide Maximum daylight between boster and slide (stroke down, 630mm adjustment up) 1,120 mm Width between columns 4,000 mm Slide area (width x depth) 3,950x 1,800mm Bed area (width x depth) 4000x 1,800 mm Opening in bed (width x depth) 3,750 x 1,300mm Main motor rating 160 kW Idle stroke rate 11 min-1 Counterpressure of cushion in bed 4,000 kN Stroke of cushion plate 250mm Height above ground, approx, 10,500 mm

829

ID	MA31146
Make	Verson
Model	S4-600-132-86
YOM	1973
Condition	Good Condition
Photo	See Photo
Capacity : 600 Tons Bed Area : 132" x 86" Shut height : 55.75" Adjustment : 14" Stroke : 22" SPM : 14 Windows : 78" Equipped With : T Slotted Bolster T Slotted Ram Cushion with 11" Stroke (4) Available

830

ID	MA31131
Make	Schuler
Model	--
YOM
Condition	Excellent
Photo	See Photo
Composed by 4 (four) single action presses with cushion Force : 320 Ton. Stroke : 400 mm Stroke/min : 30 Slide regulation : 450 mm Daylight : 1.150 mm Frontal passage : 2.200 mm Table : 2.130 mm x 1.220 mm Slide : 2.130 mm x 1.220 mm Cushion : Force : 32 Ton. Stroke : 250 mm

831

ID	MA31130
Make	Bliss
Model	--
YOM	2003
Condition	Excellent
Photo	See Photo
Tandem Press Line 400 Ton press, in excellent condition, composed by (three) Single action presses Capacity : 400 ton Stroke 600 mm Slide : regulation : 400 mm Stroke/min : 30 Moving bolster (lateral) : 2.800 mm x 1.700 mm Main motor : 75 Kw

832

ID	MA31119
Make
Model	KA3540
YOM	1988
Condition	Good Condition
Photo	See Photo
Nominal Capacity, tf : 1000 Rated distance of slide above bottom, mm : 12 Slide stroke, mm : 400 Continuous run frequency, min-1 : 20 Single strokes maximum frequency, min-1 : 16 Shut height, mm : 810 Shut height adjustment, mm : 320 Slide dimensions, mm left to right : 3100 front to back : 1700 Bolster plate dimensions, mm left to right : 3100 front to back : 1800 Main drive electric motor power, kW : 132 Overall dimensions, mm : 5150 left to right : 4700 front to back : 7830 height above floor level Press weight, ton : 193

833

ID	MI6961
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 600 t Slide Stroke : 410 mm Stroke Per Minute : At 2 Axis : 15 - 35 spm No Load : At 3 Axis ; 15 - 25 spm Die Height : 800 mm Slide Adjustment : 100 mm Slide Area : L.R x F.B : 3150 x 1250mm Bolster Area : L.R. x F.B : 3150 x 1250 mm Main Motor : 110 kW Feed Stroke : 450 mm Clamp Stroke : 140 mm Lift Stroke : 70 mm Required air pressure 45 kgf

834

ID	MA31092
Make	Kansai
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : Mechanical Press Make : Kansai Capacity : 600 ton Stroke : 400 mm SPM : 10 Bolster : 3000 x 1500 mm Die Cushion : Yes

835

ID	MA31091
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : Mechanical Press Make : Aida Capacity : 300 ton Stroke : 350 mm SPM : 15 - 25 Bolster : 2500 x 1300 mm Slide : 2400 x 1000 mm Die Height :700 mm Adjust : 100 mm Machine Type : Transfer Unit Feed Stroke : 400 mm Clamp Stroke : 100 mm SPM : 25 Finger Bar Width : 500 mm Stages : 6

836

ID	MA31090
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : Mechanical Press Make : Aida Capacity : 300 ton Stroke : 450 mm SPM : 16 Bolster : 2500 x 1520 mm Slide : 2500 x 1420 mm Die Height : 800 mm Adjust : 200 mm Die Cushion : Yes

837

ID	MA31089
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type : Mechanical Press Make : Aida Capacity : 200 ton Stroke : 250 mm SPM : 25 Bolster : 1520 x 1070 mm Slide : 1360 x 1000 mm Die Height : 430 mm Adjust : 125 mm Die Cushion : Yes

838

ID	MA31088
Make	Schuler
Model	S4-600-3100-600
YOM	1981
Condition	Good Condition
Photo	See Photo
600 Ton Shuler Tandem Line Specifications: Capacity: 600 Tons Bed Area: 133" x 74" Shut height: 51.18" Adjustment: 13.78" Stroke: 35.43" SPM: 8-25 Windows: 78" Equipped With: T Slotted Bolster T Slotted Ram 150 Ton Cushion with 9.84" Stroke (4) Available : 4 With Moving bolster

839

ID	MA31006
Make	Hwail
Model
YOM	2007
Condition
Photo	See Photo
1000 ton mechanical press Single action type Stroke:600mm SPM:20 Die height:1300mm Slide adjustment:700mm Slide area:3000m 1800mm Bolster area:3000 x1800m Bolster thickness:280mm Main motor:DC 132KW 4P Air pressure:5kg/cm2 (Die cushion) 1pad 2 cylinder 60ton x 2=120ton Stroke:200-300mm Pad:2300mm x1100mm Air pressure:5kg/cm2 Adjust motor:5.5KW X6P (Moving bolster) Moving speed:10m/min Weight of die:30ton

840

ID	MA30987
Make
Model	K3036A
YOM
Condition	Excellent
Photo	See Photo
Rated force 400 tons Slider stroke 350 mm Distance between table and slider 1000 mm Table size 4000х1100 Press weight 107 tons Quantity- 2 nos

841

ID	MA30970
Make	Komatsu
Model	OBS60
YOM
Condition
Photo	See Photo
Machine Type - C Frame Press Make - Komatsu Model - OBS-60 Capacity - 60 ton SPM -70 Stroke - 150 mm Die Height - 285 mm Adjust - 70 Table -800 x 550 mm Slide -450 x 350 mm

842

ID	MA30969
Make	Komatsu
Model	OBS110
YOM
Condition	Good Condition
Photo	See Photo
Machine Type - C Frame Press Make - Komatsu Model - OBS-110 Capacity - 110 ton SPM - 50 Stroke - 150 mm Die Height - 360 mm Adjust - 100 mm Table - 1100 x 700 mm Slide - 600 x 550 mm

843

ID	MA30968
Make	Komatsu
Model	OBS150
YOM
Condition	Good Condition
Photo	See Photo
Machine Type - C Frame Press Make - Komatsu Model - OBS-150 Capacity - 150 ton SPM - 20 - 55 Stroke - 250 mm Die Height - 220 mm Adjust - 100 mm Table - 1250 x 800 mm Slide - 700 x 550 mm

844

ID	MA30967
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type - C Frame Press Make - Komatsu Model - OBW-150 Capacity - 150 ton SPM - 35 - 65 Stroke - 200 mm Die Height - 460 mm Adjust -100 mm Table - 2000 x 760 mm Slide - 1600 x 550 mm

845

ID	MA30965
Make	Arisa
Model
YOM
Condition	Very good condition
Photo	See Photo
Capacity- 400 tons, Variable Stroke- 20/250 mm, Ram adjusment- 150 mm, Continuous stroking rate- 30 st/min, Daylight- 545 mm, Table Area- 1200 x 1200 mm, Ram area- 1200 x 1050 mm, Motor- 30 KW, Height- 5600 mm, Weight of press -40 t, SC400 S

846

ID	MA30964
Make	Erfurt
Model	PEE II 250
YOM
Condition
Photo	See Photo
Capacity- 250 tons, Variable Stroke- 40-160, Ram adjusment- 110 mm, Continuous stroking rate- 50 std/min, Lower cushion- Yes

847

ID	MA30963
Make	Erfurt
Model	PEE400
YOM
Condition
Photo	See Photo
Capacity- 400 tons, Variable Stroke- 40-140 mm, Ram adjusment- 125 mm, Continuous stroking rate- 32std/min, Serial number- 48852, Daylight- 620 mm, Table area- 1250x780. Ram area- 800x630, lower cushion: motor- 20 kw, Dimensions: Width- 1600 mm, Depth- 3500 mm, Height- 3700 mm, Weight of press- 25 t

848

ID	MA30923
Make	Komatsu
Model	OBS150
YOM
Condition
Photo	See Photo
Make Komatsu Capacity 150 ton Model OBS-150 Stroke 250 mm Die Height 225 mm Adjust 100 mm SPM 20 - 55 Bolster 1250 x 800 mm Slide 700 x 550 mm

849

ID	MA30917
Make	AIDA
Model
YOM
Condition
Photo	See Photo
Make Aida Capacity 300 ton Stroke 80 mm SPM 40 - 100 Bolster 2450 x 1200 mm Slide 2450 x 1200 mm Die Height 650 mm Adjust 80 mm

850

ID	MA30916
Make	Komatsu
Model
YOM	1981
Condition
Photo	See Photo
Make Komatsu Komatsu Komatsu Komatsu Komatsu Model OBS60B OBS60B OBS60B OBS60-2 OBS60-2 Year 1981 1981 1981 1986 1986 Capacity 60 60 60 60 60 Stroke 150 150 150 150 150 SPM 70 70 70 70 70 Die Height 285 285 285 285 285 Adjust 70 70 70 70 70 Slide Area 450�350 450�350 450�350 450�350 450�350 Bolster Area 800�550 800�550 800�550 900�550 900�550

851

ID	MA30913
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Make - Aida Capacity -200 tons SPM 40 - 80 Bolster 1520 x 900 mm Die Height 350 mm Adjust 150 mm

852

ID	MA30901
Make	Schuler German
Model
YOM
Condition	Good Condition
Photo	See Photo
Press capacity- 300 ton, Press movement- Link-Drive/Eccentric, Press size (Width)- 1524 mm (G), Press size ( Depth)- 1016 mm ( H), Race sleigh- 356 mm, Maximum slide opening (down stroke and top adjustment) 512 mm (D), Slide adjustment 203 mm (E), Bolster height 940 mm (F), Cushion Type Number of pillows Cushion capacity Stroke pillow Candle plane size Opening between the uprights 1625mm(A) Opening between the side uprights (width) 800mm(B) Opening between the Side uprights (Height) 760mm(C) Main motor power 45kW Tool automation

853

ID	MA30894
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity - 200 ton Stroke 300 mm SPM 18 - 35 Die Height 600 mm Adjust 200 mm Slide 1850 x 1000 mm Bolster 2000 x 1200 mm

854

ID	MA30892
Make	AIDA
Model
YOM
Condition	Good Condition
Photo	See Photo
Make - Aida Capacity - 200 tons SPM 40 - 80 Bolster 1520 x 900 mm Die Height 350 mm Adjust 150 mm

855

ID	MA30885
Make	AIDA
Model	C2-20(2)
YOM
Condition
Photo	See Photo
Capacity 200 ton Stroke 150 mm SPM 35 � 65 Die Height 450 mm Slide 1850 x 650 Bolster 2420 x 680 mm Uncoiler Leveller Feeder Model LFS-40R Coil Width 60 � 400 mm Coil Thickness 0.5 � 2.3 mm Coil Diameter 1200 mm Feed Length 400 mm Feed SPM 100

856

ID	MA30881
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity- 200 tons SPM- 40-80 Bolster-1520 x 900 mm Die Height-350 mm Adjust-150 mm

857

ID	MA30875
Make
Model
YOM	1984
Condition	Good Condition
Photo	See Photo
SCHULER 400T mechanical press Press Capacity 400 Tons Rated Tonnage Point 12.5 mm Distance between the a sliding table and slider 1018 mm Slide Adjustment 305 mm Motor power for adjusting the slider 5,5 kW ca. 1000 rpm Slide Stroke 610 mm Size of Slider 2743 x 1524 mm Number of sliding tables 1 Size of Table 2743 x 1524 mm Table height 400 mm Number of air cushions in the table 2 Diameter of piston 1000 mm Piston stroke 203 mm number of strokes per minute 20 Cushion Capacity 70 Tons x 2 pcs. Cushion Stroke 203 mm Main Motor Capacity 60 KW ca. 1500 rpm Moving Bolster Front Exit QUANTITY- 2 NOS

858

ID	MA30859
Make	AIDA
Model	PDA-300L(1)
YOM	1985
Condition	Good Condition
Photo	See Photo
300Ton Make - Aida Model - PDA-300L(1)

859

ID	MA30858
Make	AIDA
Model	HMX-300(1)
YOM	1996
Condition	Good Condition
Photo	See Photo
300Ton Make - Aida Model - HMX-300(1),

860

ID	MA30851
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Make Aida Model PDC-15 Capacity 150 ton Stroke 200 mm SPM 30 � 60 Die Height 450 mm Slide 1480 x 550 Bolster 1950 x 650 mm Make Aida Model LFS-60E Width 100 � 600 mm Thickness 0.5 � 4.5 mm Coil Diameter 1500 mm Feed Length 25 � 400 mm Feed SPM - 100

861

ID	MA30850
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Make Aida Model C2-20 Capacity 200 ton Stroke 150 mm SPM 35 � 65 Die Height 450 mm Slide 1850 x 650 Bolster 2420 x 680 mm

862

ID	MA30832
Make	Niagara
Model	SE2-600-108-60
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity: 1000 Ton Bed Area: 108� x 60� Shut Height: 42� Adjustment: 12� Stroke: 20� SPM: 18 Widows: 74� Cushion

863

ID	MA30715
Make	Amada,Japan
Model
YOM
Condition
Photo	See Photo
200 ton Aida Capacity 200 tons Stroke 150 mm SPM 30 -75 Die Height 450 mm Bolster 2400 x 700 mm

864

ID	MA30714
Make	AIDA,Japan
Model
YOM
Condition
Photo	See Photo
Capacity 160 ton Stroke 250 mm SPM 20 - 40 Die Height 435 mm Bolster 2000 x 700 mm

865

ID	MA30713
Make	Komatsu
Model
YOM
Condition
Photo	See Photo
H Frame Press Capacity -300 ton Stroke-500 mm SPM-15 Shut Height-1700 mm Adjust-300 mm Bolster-2200 x 1500 mm Slide-2200 x 1500 mm Die Cushion-100 ton Cushion Stroke-260 mm

866

ID	MA30712
Make	Komatsu
Model
YOM
Condition
Photo	See Photo
Type-H Frame Press Capacity -400 ton Stroke-800 mm SPM-24 Die Height-1300 mm Adjust-500 mm Bolster-2740 x 1650 mm Slide-2740 x 1650 mm Die Cushion-75 ton Cushion Stroke-305 mm Main Motor-75 Kw

867

ID	MA30607
Make
Model
YOM	2015
Condition
Photo	See Photo
Capacity:2000ton Make:Jiwon(Korea) Limit of capacity;13mm Slide stroke:800mm SPM:12~20 Dieheight:1600mm Adjustment of slide:700mm Slide area:5000 x2600mm Bolster area:5000 x2600mm Moving bolster:Right moving , Speed: 10m/min Main motor:250KW x 4p Slide adjust motor:22kw x6p Air:5.0kg/cm2 Power source:380V x 60hz (Die cushion) Capacity:300ton Stroke:300mm Pad size:4200 x2000mm Die cushion adjust motor:5.5 x6p Stroke adjustment:0~300mm

868

ID	MA30595
Make
Model
YOM	2015
Condition
Photo	See Photo
Jiwon(Korea) Capacity:2000ton Slide stroke:800mm SPM:12~20 Die height:1600mm Bolster area:5000 x2600mm Moving bolster: Right moving , Speed: 10m/min

869

ID	MA30539
Make	Warco
Model
YOM
Condition	Good Condition
Photo	See Photo
300 Ton Warco 84" x 60", 20" stroke, 36" shut height, 17 spm, 50 ton cushion

870

ID	MA30538
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61 ton cushion

871

ID	MA30537
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61 ton cushion

872

ID	MA30536
Make	Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61 ton cushion

873

ID	MA30535
Make	Clearing
Model
YOM
Condition
Photo	See Photo
350 Ton Clearing 132" x 80", 24" stroke, 60" shut height, 10 spm, 61 ton cushion

874

ID	MA30533
Make	Bliss
Model
YOM
Condition
Photo	See Photo
400 Ton Bliss 108" x 72" 24" stroke, 40" shut height, 13 spm, 70 ton cushion

875

ID	MA30531
Make	Bliss
Model
YOM	1976
Condition	Good Condition
Photo	See Photo
Model: SE1-600-42-48 Capacity: 600 ton Bed Area: 42� x 48� Stroke Length: 16� Shut Height: 34� Adjustment: 12� Strokes Per Minute: 16 Equipped With: 24� x .375� x 30,000 Lbs Coe Servo Feed Line Helm Loadgard Tonnage Monitor

876

ID	MA30522
Make	AIDA,Japan
Model	C1-11(2)
YOM	1980
Condition	Good Condition
Photo	See Photo
Stroke Length 180 mm SPM 50 Die Height 350 mm Adjust 90 mm Slide Size 600 x 520 mm Bolster Size 1080 x 680 mm with die cushion

877

ID	MA30521
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1990
Condition	rebuilt partially
Photo	See Photo
Stroke Length 160 mm SPM 40 - 75 Die Height 320 mm Adjust 80 mm Slide Size 540 x 460 mm Bolster Size 950 x 600 mm with die cushion installed new vibroisolation mount & new safety light curtain sensor

878

ID	MA30520
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1990
Condition	rebuilt partially
Photo	See Photo
Stroke Length 160 mm SPM 40 - 75 Die Height 320 mm Adjust 80 mm Slide Size 540 x 460 mm Bolster Size 950 x 600 mm installed new vibroisolation mount & new safety light curtain sensor

879

ID	MA30519
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1986
Condition	rebuilt partially
Photo	See Photo
Stroke Length 160 mm SPM 40 - 75 Die Height 320 mm Adjust 80 mm Slide Size 540 x 460 mm Bolster Size 950 x 600 mm installed new vibroisolation mount & new safety light curtain sensor

880

ID	MA30518
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1985
Condition	rebuilt partially
Photo	See Photo
Stroke Length 160 mm SPM 40 - 75 Die Height 320 mm Adjust 80 mm Slide Size 540 x 460 mm Bolster Size 950 x 600 mm with die cushion installed new vibroisolation mount & new safety light curtain sensor

881

ID	MA30517
Make	AIDA,Japan
Model	NC1-8(1)
YOM	1984
Condition	Reconditioned
Photo	See Photo
Stroke Length 100 mm SPM 55 - 110 Die Height 300 mm Adjust 80 mm Slide Size 540 x 460 mm Bolster Size 950 x 600 mm ( new one ) installed new vibroisolation mount & new safety light curtain sensor

882

ID	MA30481
Make	Verson
Model	S2-600-120-72T
YOM
Condition
Photo	See Photo
600 Ton Verson S2-600-120-72T with 10" Stroke, 20 to 40 SPM

883

ID	MA30475
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke: 150 mm, SPM: 30-75 Die height: 450 mm, Bolster: 2400 x 700 mm

884

ID	MA30474
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 150 ton, Stroke:250 mm, SPM: 20-40 Die height:435 mm, Bolster: 2000 x 700 mm

885

ID	MA30473
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
C frame Capacity: 160 ton, Stroke: 250 mm, SPM: 20-40 Die height: 435 mm, Bolster: 200 x 700 mm

886

ID	MA30442
Make	AIDA,Japan
Model
YOM
Condition	Excellent condition,under power
Photo	See Photo
C frame press, Capacity: 200 ton, Stroke: 250 mm, SPM: 20-40 Die height: 500 mm, Adjust: 105 mm, Bolster: 2400 x 800 mm, Slide: 1830 x 650 mm, Die cushion: 32 tons, Cushion stroke: 125 mm, Main motor: 15 Kw

887

ID	MA30412
Make	WMW Erfurt,Germany
Model	PKZZ1250
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity: 1250 ton, Centers of pressure: 2 idle stroke rate: 11 Distance between the uprights: 4000 mm, Shut height: 1165 mm, Table dimensions: 4000 x 1800 mm, Table gap: 37050 x 1300 mm, Ram dimensions: 3950 x 1800 mm, Ram stroke: 630 mm, Ram adjustment: 630 mm, Die cushion capacity: 250 ton, Greatest depth of extraction: 250 mm, Main motor power: 132 kW, Press weight: 215000 kg.

888

ID	MA30387
Make	Komatsu
Model	OBS200-5
YOM	1996
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, SPM: 25-50 Stroke: 250 mm, Slide adjustment: 120 mm, Slide area: 850 x 650 mm, Bed area: 1450 x 840 x 190 mm, Quantity: 9 nos

889

ID	MA30368
Make	ISIS
Model	U60II
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity: 600 ton, Stroke length: 25 mm, SPM: 80~500 Die height: 280/325 mm, Adjustment of slide: 40 mm, Bolster area: 800 x 580 x 125 mm, Slide area: 800 x 400 mm, Bed opening: 600 x 80 mm, Motor: 15 kw, Voltage: 220 V Machine weight: 1000 kg.

890

ID	MA30367
Make	AIDA,Japan
Model	PD20
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, SPM : 34, Bolster size : 2000 x 1220, Slide size : 1830 x 1000, Die height : 820, Slide Adjust : 400, Cushion : Yes.

891

ID	MA30366
Make	ISIS
Model	80LF
YOM	2005
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Stroke length: 25 mm, SPM: 200~500 SPM, Die height: 310 mm, Adjustment of slide: 25 mm, Bolster area: 1300 x 700 x 155 mm, Slide area: 1300 x 570 mm, Bed area: 1100 x 120 mm, Motor: 30 kw x 4 p Voltage: 220 V Machine weight: 17000 kg. Quantity: 1 nos

892

ID	MA30365
Make	ISIS
Model	U80III
YOM	2003-2004
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Stroke length: 25 mm, SPM: 200~500, Die height: 290 mm, Adjustment of slide: 65 mm, Bolster area: 1100 x 700 x 165.5 mm, Slide area: 1100 x 570 mm, Bed opening: 850 x 130 mm, Motor:22 kw x 4 P Voltage: 220 V Machine weight: 13000 kg Quantity: 6 nos

893

ID	MI6758
Make	Kaushiko,Indian
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton

894

ID	MI6757
Make	Ameteep
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 120 ton

895

ID	MI6756
Make	Godrej,India
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 100 ton

896

ID	MI6755
Make	Master
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 160 ton

897

ID	MA30359
Make	Komatsu
Model	OBS-80-3B
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity: 80 ton

898

ID	MA30358
Make	Komatsu
Model	E2G300-K3M
YOM	1993
Condition	Good Condition
Photo	See Photo
300 ton, S:450, 15～25 rpm, DH：650, SLAJ: 200, BL：21001350180, SL: 1900*1200, DC, ORII LEVELER FEEDER（ROLL LENGTH：800, t0.3～4.5）

899

ID	MA30357
Make	Amada,Japan
Model	TP-110CX2
YOM	1990
Condition	Good Condition
Photo	See Photo
110 ton, S:150, 40～75 spm, DH: 365, SLAJ: 100, BL: 1100700, SL: 600500, LIGHT GUARD

900

ID	MA30356
Make	Amada,Japan
Model	TP-80C
YOM	1988
Condition	Good Condition
Photo	See Photo
80 ton, S:180, 50 spm, DH:350, SLAJ: 80, BL:1000600, SL: 550450, LIGHT GUARD, DC

901

ID	MA30355
Make	AIDA,Japan
Model	PS-30(2)
YOM	1982
Condition	Good Condition
Photo	See Photo
Single crank , straight side frame press, Capacity: 300 ton, Stroke length: 250 mm, Die height: 545 mm, Adjust: 125 mm, SPM: 20-35 Slide size: 900 x 900 mm, Bolster size: 110 x 900 mm, Equipped Safety light curtain sensor (new) vibroisolation mount

902

ID	MA30354
Make	AIDA,Japan
Model	C1-11(2)
YOM	1980
Condition	Good Condition
Photo	See Photo
C frame press, Capacity: 110 ton, Stroke length: 180 mm, SPM: 50 Die height: 350 mm, Adjust: 90 mm, Slide size: 600 x 520 mm, Bolster size: 1080 x 680 mm, With die cushion 3 units

903

ID	MA30353
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1990
Condition	Good Condition
Photo	See Photo
C frame press Capacity: 80 ton, Stroke length: 160 mm, SPM: 40-75 Die height: 320 mm, Adjust: 80 mm, Slide size: 540 x 460 mm, Bolster size: 950 x 600 mm, with die cushion installed new vibroisolation mount & new safety light curtain sensor

904

ID	MA30352
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1990
Condition	Good Condition
Photo	See Photo
C frame press Capacity: 80 ton, Stroke length: 160 mm, SPM: 40-75 Die height: 320 mm, Adjust: 80 mm, Slide size: 540 x 460 mm, Bolster size: 950 x 600 mm, installed new vibroisolation mount & new safety light curtain sensor

905

ID	MA30351
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1986
Condition	Good Condition
Photo	See Photo
C frame press Capacity: 80 ton, Stroke length: 160 mm, SPM: 40-75 Die height: 320 mm, Adjust: 80 mm, Slide size: 540 x 460 mm, Bolster size: 950 x 600 mm, installed new vibroisolation mount & new safety light curtain sensor

906

ID	MA30350
Make	AIDA,Japan
Model	NC1-8(2)
YOM	1985
Condition	Good Condition
Photo	See Photo
C frame, Capacity: 80 ton, Stroke length: 160 mm, SPM: 40-75 Die height: 320 mm, Adjust: 80 mm, Slide size: 540 x 460 mm, Bolster size: 950 x 600 mm, with die cushion 2 units installed new vibroisolation mount & new safety light curtain sensor

907

ID	MA30349
Make	AIDA,Japan
Model	NC1-8(1)
YOM	1984
Condition	Good Condition
Photo	See Photo
C frame press Capacity: 80 ton, Stroke length: 100 mm, SPM: 55-110 Die height: 300 mm, Adjust: 80 mm, Slide size: 540 x 460 mm, Bolster size: 950 x 600 mm (new one) Installed new vibroi solation mount and new safety light curtain sensor

908

ID	MA30348
Make	OKK,Japan
Model	DC-200 B3-S
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke of slide: 300 mm, Slide adjustment: 25 spm, Die height: 600 mm, Bolster size: 1800 x 1200 mm (RL x FB) Bottom size of slide: 1650 x 100 mm

909

ID	MA30347
Make	AIDA,Japan
Model	C1-20(2)
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke of slide: 250 mm, Strokes per minute: 25-45 spm, Die height: 450 mm, Bolster size: 1420 x 840 mm (RL x FB) Bottom size of slide: 850 x 640 mm (RL x FB) Main motor capacity: 3 � 220 v 15 kw

910

ID	MA30332
Make	Ingyu
Model	IHD-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 tons - Stroke: 30 mm - Speed: 400 spm - Die Height: 420 mm - Slide Size: 2000 x 750 mm - Bolster Size: 2000 x 1000 mm

911

ID	MA30323
Make	Komatsu
Model
YOM
Condition	Very good condition
Photo	See Photo
Capacity:1500 ton Stroke: 500 mm Die Height: 750 mm SPM:16 Bolster: 1500 x 1400 mm Slide: 1500 x 1400 mm Die Cushion: 30 tons

912

ID	MA30289
Make	Shinohara
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 150 ton, Stroke: 150 mm, SPM: 40, Bolster: 800 x 740 mm, Slide; 460 x 410 mm, Die height: 405 mm, Adjust: 80 mm, Die cushion: 10 tons, Cushion stroke: 130 mm, Main motor: 11 Kw

913

ID	MA30267
Make	WMW Erfurt,Germany
Model	PKZVI800FS
YOM
Condition	Good Condition
Photo	See Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton, Quantity: 2 nos

914

ID	MA30261
Make	AIDA,Japan
Model	PL2-200
YOM
Condition	Excellent ,unused
Photo	See Photo
Capacity: 200 ton Stroke: 150 mm SPM: 30 - 60 Bolster: 2200 x 1500 mm Slide:2200 x 1500 mm Die Height: 800 mm Adjust: 150 mm Main Motor: 22 Kw Uncoiler Leveler Feeder Make: Aida Coil Width: 500 - 1525 mm Coil Thickness: 0.6 - 2.0 mm Coil Capacity: 15 ton Coil Diameter: 500 x 1600 mm Feed Length: 70 - 1500 mm

915

ID	MA30260
Make	AIDA,Japan
Model
YOM
Condition	Good working condition
Photo	See Photo
Capacity: 200 tons Stroke: 250 mm SPM: 25 Die Height: 450 mm Adjust: 125 mm Bolster: 1520 x 1070 mm Slide: 1360 x 1000 mm The press has die cushions

916

ID	MA30251
Make	WMW Erfurt,Germany
Model	PKZVI800FS
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton

917

ID	MA30232
Make	Komatsu
Model	E2P200-2
YOM	July 1980
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke length: 300 mm, SPM: 36 mm, Die height: 600 mm, Slide adjust: 200 mm, Slide size: 2500 x 1100 mm, Bolster: 2500 x 1200 mm.

918

ID	MA30213
Make	WMW Erfurt,Germany
Model	PKZVIII500.1FS
YOM
Condition	Good Condition
Photo	See Photo
Max. pressing force of slide (at 12,5 mm distance to the lower dead point): 500 tons Max. pressing force of slide (at 200 mm distance to the lower dead point): 160 tons Number of single strokes at continuous work per minute: 20 Distance between side columns: 2800 mm Slide stroke: 500 mm Slide adjustment: 500 mm Max. extract depth: 200 mm Max. shut height between bolster plate and slide (stroke down, adjustment up): 1200 mm Height of pull-out table: 500 mm Bed area (width x depth): 3150 x 2100 mm Slide area (width x depth): 3150 x 2100 mm Opening in the bed (width x depth): 2500 x 1600 mm Main motor power: 75 kW Number of no-load strokes per minute: 20 Cushion force in the bolster: 100 tons Cushion stroke: 200 mm Cushion plate dimensions: 2480 x 1580 mm Height above floor: 7200 mm

919

ID	MA30196
Make	WMW Erfurt,Germany
Model	PKZZ1250
YOM
Condition	Good Condition
Photo	See Photo
1250 tons , ram stroke 630 mm , 11 SPM , shut height 1165 mm , bolster plate to ram adjustment stroke 630 mm , bed 4000 x 1800 mm , ram 3950 x 1800 mm , stroke of pneumatic cushion/table 250 mm , cushions power 250 tons , main drive motor 125 kW , dimensions 7000 x 4300 x 9500 mm , press weight 245 tons.

920

ID	MA30192
Make	Shinohara
Model	PL2-350A-25
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 350 ton, Stroke : 450 mm, SPM : 16, Die Height : 900 mm, Adjust : 220 mm, Bolster : 2500 x 1440 mm, Slide : 2500 x 1300 mm, Die Cushion : 66 ton, Cushion Stroke : 20 - 230 mm.

921

ID	MA30190
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, SPM : 20, Die Height : 850 mm, Adjust : 430 mm, Bolster : 2000 x 1220 mm, Slide : 1830 x 1000 mm, Main Motor : 18.5 Kw.

922

ID	MA30189
Make	Washio
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 350 ton, Stroke : 500 mm, SPM : 15, Die Height : 900 mm, Adjust : 270 mm, Bolster : 2500 x 1400 mm, Slide : 2300 x 1400 mm, Die Cushion : 60 ton, Cushion Stroke : 260 mm.

923

ID	MA30180
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 350 ton, Stroke : 500 mm, SPM : 20, Adjust : 400 mm, Die Height : 950 mm, Bolster : 2500 x 1520 mm.

924

ID	MA30176
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, SPM : 20, Die Height : 850 mm, Adjust : 430 mm, Bolster : 2000 x 1220 mm, Slide : 1830 x 1000 mm, Die Cushion : 30 ton, Stroke : 150 mm, Pad Size : 1500 x 700 mm, Main Motor : 18.5 Kw.

925

ID	MA30175
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, SPM : 25, Die Height : 820 mm, Adjust : 430 mm, Bolster : 2000 x 1220 mm, Slide : 2000 x 1000 mm, Main Motor : 30 Kw.

926

ID	MA30117
Make	AIDA,Japan
Model
YOM
Condition	Good working condition
Photo	See Photo
Capacity: 200 tons Stroke: 250 mm SPM: 25 Die Height:450 mm Adjust: 125 mm Slide:1360 x 1000 mm Bolster:1520 x 1070 mm

927

ID	MA30111
Make	WMW Erfurt,Germany
Model	PKZZI1250/4000
YOM
Condition	Good Condition
Photo	See Photo
Max. slider force at the distance of : 12,5 mm in the lower dead point : 1250 tons, Slider force at the distance of : 250 mm in the lower dead point : 350 tons, Number of single strokes per minute : 11, Slider stroke : 630 mm, Slider adjustment : 630 mm, The closed height : 1165 mm, Table pillow :- -Max. stroke : 250 mm, -Stroke adjustment : 250 mm, -Max. holding force : 250 tons, -Max. ejection force : 40 tons, Table dimensions : 4000 x 1800 mm, Bolster dimensions : 3950 x 1800 mm, Table gap : 3750 x 1300 mm, Main motor power : 132 kW, Stay spacing : 4000 mm, Press weight : 215000 kg. Weight of a table in assembly with an exhaust pillow and a plate of a pusher : 42600 kg, Weight of a table (without built in details) : 27400 kg, Weight of an exhaust pillow : 3000 kg, Weight of a plate of a pusher : 5400 kg, Weight of a lateral rack in assembling : 8000 kg, Weight of a cross-arm in assembling : 44000 kg, Weight of a cross-arm without built in details : 24800 kg, Weight of the top part of a cross-arm : 7800 kg, Weight of a shaft of a flywheel with a pine forest with a muff and brakes : 16900 kg, Weight of a slider in assembling : 33600 kg, Weight of coupling bolts : 3400 kg.

928

ID	MA30108
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton SPM: 60 Adjust: 100 mm Bolster: 1850 x 1100 mm Slide:1850 x 1100 mm Die Height:450 mm Uncoiler Leveler Feeder Unit Make: Sonoruka Coil Capacity: 5000 Kg Coil Diameter: 800 x 1500 mm Sheet Thickness:0.5 - 3.2 mm Sheet Width: 70 - 600 mm Feed Length: 60 spm

929

ID	MA30093
Make	Komatsu
Model	OBS150
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity:150 ton Stroke: 200 mm SPM:27 - 55 Adjust: 100 mm Bolster:1250 x 800 mm Slide:700 x 550 mm Die Height:450 mm Die Cushion Capacity:14 ton Die Cushion Stroke;130 mm Cushion Pad:650 x 420 mm

930

ID	MA30083
Make	WMW Erfurt,Germany
Model	PKZZ800
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton

931

ID	MA30063
Make	Fukui
Model	MDC300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton Stroke:450 mm SPM:10 - 20. Die Height:675 mm Bolster:2150 x 1350 mm Slide:2000 x 1200 mm Adjust:200 mm Die Cushion:2 x 25 ton = 50 ton Pa:2 pads Pad Size:850 x 900 x 2 Cushion Stroke:250 mm

932

ID	MA30053
Make	Shinohara
Model	DA300D
YOM
Condition	Good working condition
Photo	See Photo
Capacity : 300 ton, Stroke : 300 mm, SPM : 18 - 35, Die Height : 650 mm, Bolster : 2650 x 1220 mm, Slide : 2500 x 1220 mm, Adjust : 200 mm, With Die Cushion, With Feed Unit.

933

ID	MA30035
Make	Cowlishaw Walker
Model	S1-600-48-8
YOM	1975
Condition	Good Condition
Photo	See Photo
Capacity: 600 ton Bed area: 1050 x 1050 mm Stroke: 200 mm, Adjustment: 150 mm Shut height SDAU max: 22�� Shut height SDAU min: 16�� Speeds: 25 spm No cushion, complete with Wyko BHP single expanding mandrel decoiler, snubber, peeler, pinch rolls, Levelling rolls, coil car, coil holder, 258 mm wide x 1-3.5 mm strips or 1-3 mm coils x 2.5 tonne coil weight, fully guarded, scrap removal system.

934

ID	MA30034
Make	Wilkins & Mitchell
Model	S3-450-210-127-36
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity: 450 ton Bed area: 1800 x 900 mm, Stroke:125 mm, Adjustment:150 mm, Shut height SDAU max: 475 mm Shut height SDAU min: 325 mm, Speeds: 25-60 spm Capacity:210 ton Bed area: 1375 x 900 mm Stroke: 125 mm, Adjustment: 150 mm Shut height SDAU max: 23�� Shut height SDAU min:17�� Progression press complete with 2 beds, Servo press coil feed including single expanding mandrel decoiler, snubber, peeler, flattener, 360 mm maximum width x 1 - 5 mm gauge x 2 tonne coil weight, rising screen guards and scrap conveyor system.

935

ID	MA29997
Make	Sato
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 450 mm, SPM : 16, Die Height : 860 mm, Bolster : 2130 x 1370 mm, Slide : 2130 x 1370 mm, Adjust : 200 mm, Die Cushion : 2 x 24 ton = 48 ton, Pad : 2 pads, Pad Size : 850 x 900 x 2, Cushion Stroke : 230 mm.

936

ID	MA29920
Make	OKK
Model	DCM300B
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 400 mm, SPM : 16, Die Height : 725 mm, Bolster : 2050 x 1500 mm, Slide : 1800 x 1200 mm, Adjust : 200 mm, Die Cushion : 50 ton, Pad : 1 Pad, Pad Size : 1500 x 860 mm, Cushion Stroke : 225 mm.

937

ID	MA29883
Make	OKK
Model	DCM-300BIII
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Stroke: 450 mm, SPM: 18, Die height: 700 mm, Bolster: 2150 x 1350 mm, Slide: 1900 x 1200 mm, Adjust: 200 mm, Die cushion: 50 ton, Pad: 1 pad, Pad size: 1500 x 860 mm, Cushion stroke: 225 mm,

938

ID	MA29879
Make	TMP Voronezh Russian
Model	K3537
YOM	1974
Condition	Good Condition
Photo	See Photo
Capacity : 500 tons, Slide stroke : 250 mm, No. of strokes/min 25 Shut height 750 mm Table dimensions : 2500 x 1400 mm, Slide dimensions : 2380 x 1200 mm, Main motor power 47 kW Overall dimensions : 4350 x 2470 x 5660 mm, Height above floor : 5660 mm, Press weight : 70 tons.

939

ID	MA29875
Make	TMP Voronezh Russian
Model	KB3537
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 tons, Slide stroke : 250 mm, No. of strokes/min 25 Shut height 750 mm Table dimensions : 2500 x 1400 mm, Slide dimensions : 2380 x 1200 mm, Main motor power 47 kW Overall dimensions : 4350 x 2470 x 5660 mm, Height above floor : 5660 mm, Press weight : 70 tons.

940

ID	MA29825
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Stroke: 500 mm, SPM: 16, Bolster: 2800 x 1600 mm, Slide: 2800 x 1600 mm, Die height: 1100 mm, Die cushion capacity: 100 ton, Die cushion stroke: 250 mm, Quantity: 2 nos

941

ID	MA29673
Make	AIDA,Japan
Model	C2-16(2)-B
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity : 160 ton, Stroke : 230 mm, Stroke Per Minute : 30 - 46, Die Height : 435 mm, Bolster : 2020 x 760 mm, Slide : 1500 x 580 mm, Adjust : 100 mm, Motor : 22 Kw. Type:Transfer Feeder Make: Aida Model: TCV-3T Feed Stroke: 180 mm Feed Stroke: 200 mm Feed Stroke: 230 mm Clamp Wdth: 300 mm Clamp Wdth:350 mm Clamp Stroke:90 mm Lift Stroke:30 mm Stage:8 7 6 2nd Axis Stroke:30 - 46 spm 3rd Axis Stroke:35 spm

942

ID	MA29669
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 350 ton, Stroke: 500 mm, SPM: 20, Bolster: 2500 x 1520 mm, Slide: 2500 x 1520 mm, Die height: 950 mm, Adjust: 400 mm, Die cushion: 1 pad,2 cylinders, Die cushion capacity: 60 tons, Cushion stroke: 250 mm, Main motor: 37 Kw. Uncolier Leveler Feeder Unit :- Make : Sonoruka, Coil Capacity : 5000 kg, Coil Diameter : 800 x 1500 mm, Sheet Thickness : 1.0 - 3.2 mm, Sheet Width : 100 -- 600 mm, Feed Length : 50 spm.

943

ID	MA29656
Make	WMW Erfurt,Germany
Model	PKZV800/4000
YOM
Condition	Good Condition
Photo	See Photo
Max. force of slide: 800 tons Stroke of slide: 500 mm Adjustability of slide: 500 mm Max. daylight between bolster and slide (SDAU): 1200 mm Width between columns: 4000 mm Slide area (WxD): 4000x2500 mm Bed area (WxD): 4000x2500 mm Opening in bed (WxD): 3520x1520 mm Moving table height: 630 mm Main motor power: 90 kW Idle stroke rate per 1 min: 14 Counterpressure of cushion in bed: 160 tons Stroke of cushion plate: 200 mm Height above ground: 8400 mm Press weight: 210000 kg

944

ID	MA29641
Make	Innocenti Blanch - USI Clearing
Model	S2-400-108-60
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Bed area : 2743 x 1524 mm, Stroke : 610 mm, Shut height : 1118 mm, Speed : 20 spm, Adjustment : 305 mm, Slide area : 2743 x 1524 mm, Number of cushions : 2, Cushion stroke : 203 mm, Quantity : 4.

945

ID	MA29636
Make	Danly
Model	S1-800-60-54
YOM	1972
Condition	Good condition,under power
Photo	See Photo
Capacity: 800 ton, Stroke: 600 mm, Cushion stroke: 300 mm, Shut height: 950 mm, Adjustment: 300 mm, SPM:16-20-24 Bolster thickness: 212.5 mm, Quantity: 2 nos Equipped with: T-slotted ram, Air clutch and brake Air counterbalances, Light curtains.

946

ID	MA29605
Make	WMW Erfurt,Germany
Model	PKZZ-500TS
YOM
Condition	Good Condition
Photo	See Photo
Centers of pressure: 2, Slide's pressure: 500 tones, Slide's stroke: 500 mm, Distance between bolster and slide: 1100 mm, Distance between columns: 2800 mm, Slide area: 2800 x 1700 mm, Main motor: 75 kW.

947

ID	MA29588
Make	AIDA,Japan
Model
YOM
Condition	Very good condition
Photo	See Photo
Capacity: 250 ton, Stroke: 200 mm, SPM: 40-75, Die height: 500 mm, Adjust: 100 mm, Bolster: 1850 x 1100 mm, Slide: 1850 x 900 mm, Main motor: 45 Kw, Uncoiler Leveler Feeder Make : Sonoruka Sheet width: 400 mm, Sheet thickness: 6.0 mm, Coil external diameter: 1200 mm, Coil weight: 3000 kgs, Coil inernal diameter: 508 mm, Main motor: 75 Kw.

948

ID	MA29574
Make	Komatsu
Model	E4F1000x600
YOM	1981.02
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton, Stroke length: 990 mm, Die height: 400~579 mm, Slide: 178 mm, SPM: 9~15, Upright between: 3500 mm, Bolster: 3400 x 2000 x 1550 mm, Flor to bed surface: 10000 mm, Floor to bolster: 750 mm, Level feeder attached, Coiler attached, Die coiler attached

949

ID	MA29567
Make	Bliss
Model	SE4-800
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Stroke length: 450 mm, Strokes per min: 610, Slide adjustment max-min: 780-480 mm, Die height: 630 mm, Table area: 2755 x 1680 x 260 mm, table surface height: 670 mm, Position of anchorbolts: 3000 x 4500 mm, Floor space required: 2700 x 4320 mm, Overall measurement: 2700 x 4320 mm, Press overall height; 6460 mm, Motor: 100/75 HP, Required air pressure: 5 Kg, 2 bolster side moving no die custion

950

ID	MA29561
Make	Wasino,Japan
Model	PUX15
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 15 ton, Ram Stroke : 60 mm, Stroke per minute : 120. Die Height : 200 mm.

951

ID	MA29560
Make	Wasino,Japan
Model	PUX25
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 25 ton, Ram Stroke : 80 mm, Stroke per minute : 120. Die Height : 220 mm.

952

ID	MA29559
Make	Wasino,Japan
Model	PUX80
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Ram Stroke : 180 mm, Stroke per minute : 50. Die Height : 350 mm. DC.

953

ID	MA29558
Make	Wasino,Japan
Model	PUX80
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Ram Stroke : 180 mm, Stroke per minute : 50. Die Height : 350 mm.

954

ID	MA29557
Make	Wasino,Japan
Model	PUX80
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Ram Stroke : 180 mm, Stroke per minute : 50. Die Height : 350 mm.

955

ID	MA29556
Make	Wasino,Japan
Model	PUX80
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Ram Stroke : 180 mm, Stroke per minute : 50. Die Height : 350 mm.

956

ID	MA29555
Make	Wasino,Japan
Model	PUX80
YOM	1987
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Ram Stroke : 180 mm, Stroke per minute : 50. Die Height : 350 mm. DC.

957

ID	MA29554
Make	Wasino,Japan
Model	PUX150
YOM	1988 / 1989
Condition	Good Condition
Photo	See Photo
Capacity : 150 ton, Ram Stroke : 225 mm, Stroke per minute : 25~45. Die Height : 30 DC. Make : Orii. NC Leveler feeder LCC04HB1HAS-DTS.

958

ID	MA29543
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 100 Ton.

959

ID	MA29540
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 160 Ton, Stroke : 130 mm, Stroke per minute : 40-80, Die height : 325 mm, Adjustment : 100 mm, Table size : 2020 x 760 mm, Slide size : 1500 x 580 mm.

960

ID	MA29539
Make	OKK
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 100 Ton, Stroke : 170 mm, Stroke per minute : 45, Die height : 360 mm, Adjustment : 85 mm, Table size : 620 x 1060 mm, Slide size : 500 x 620 mm.

961

ID	MA29538
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 100 Ton, Stroke : 170 mm, Stroke per minute : 50, Die height : 550 mm, Adjustment : 550 mm.

962

ID	MA29537
Make	Suzuki (Kongo)
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 55 Ton, Table size : 800 x 450 mm,

963

ID	MA29536
Make	Endo
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 Ton, Stroke : 150 mm, Die height : 350 mm, Table size : 930 x 900 mm, Slide size : 750 x 850 mm.

964

ID	MA29521
Make	WMW Erfurt,Germany
Model	PE4-HH-500-FS
YOM	1996
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Table size: 3500 x 1800 mm, Control: 2 nos

965

ID	MA29520
Make	WMW Erfurt,Germany
Model	PE2-UE-800FS
YOM	1989
Condition	Very good condition
Photo	See Photo
Capacity: 800 Table size: 1800 h 1400 mm, Quantity: 3 nos

966

ID	MA29519
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 110 ton, Stroke length : 150 mm, Stroke per minute : 32~65 S.P.M, Slide area : 600 x 450 mm, Bolster area : 1100 x 700 x 100 mm, Slide adjustment : 100 mm, Die height : 380 mm

967

ID	MA29518
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 60 ton

968

ID	MA29517
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 45 ton

969

ID	MA29516
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 35 ton

970

ID	MA29515
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 60 ton

971

ID	MA29514
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 45 ton

972

ID	MA29513
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity:110 ton, Stroke length:180 mm, Stroke per minute:50 spm, Slide area:600 x 520 mm, Bolster area:1080 x 680 mm, Slide adjustment:90 mm, Die height:350 mm, Motor power:7.5 kW,

973

ID	MA29500
Make	Ambrogio Galli
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 80 tons, Stroke: 19-130 mm, Stroke per minute: 55, 7,5 HP

974

ID	MA29495
Make	Amada,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 75 T, Table : 810*560 mm, Die high : 400 mm, Stroke : 130 mm.

975

ID	MA29494
Make	WMW Erfurt,Germany
Model	PKZV(I)800FS
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Ram stroke:500 mm, Number of ram strokes: 14 min-1, Bed to bolster plate adjustment: 500 mm, Shut height: 1700 mm, Size of ram: 3950 x 2500 mm, Gap size of table: 3520 x 1520 mm, Cushion power on table: 1600 kN, Tables ejector (cushion): 200 mm, Main drive motor power: 90 kW, Height above floor level approx: 8400 mm, Weight approx: 230 ton, Quantity: 4 nos.

976

ID	MA29463
Make	Legnani
Model	ALF
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 40 ton.

977

ID	MA29462
Make	Ross
Model	Unused
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 50 Tons, Stroke : 8-100 mm, Stroke per minute : 95, HP : 3.

978

ID	MA29461
Make	Manzoni
Model	RAF
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 80 Tons, Stroke : 80 mm, Stroke per minute : 65, HP : 7,5.

979

ID	MA29460
Make	OFB
Model	VFP35
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 35 Tons, Stroke per minute : 130, HP : 3.

980

ID	MA29459
Make	OFB
Model	VFP
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 35 Tons, Stroke per minute : 130, HP : 3.

981

ID	MA29453
Make	IMV,Italy
Model	Galli-P8F
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Stroke : 100 mm, Stroke per minute : 65, 7,5 HP

982

ID	MA29452
Make	Cerini
Model	I1R
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 80 ton, Stroke : 110 mm, Stroke per minute : 60, 5.5 HP

983

ID	MA29451
Make	Mossini
Model	TMF/S
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 40 Ton, Stroke : 10-80 mm, Stroke Per minute : 54-80, Power : 3/4,5 HP, With automatic feed.

984

ID	MA29450
Make	Legnani
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 40 ton.

985

ID	MA29449
Make	Legnani
Model	ALF
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 40 ton.

986

ID	MA29448
Make	OTI
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 100 ton, Stroke per minute : 70, Slide adjustment : 100 mm, Slide stroke : 0-120 mm, Power : 5,5 Kw, With automatic feed.

987

ID	MA29447
Make	Manzoni
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 130 ton, Stroke : 140 mm, Stroke per minute : 25-75.

988

ID	MA29446
Make	Balconi
Model	MTRS/L 150
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 Tons, HP : 15, Stokes per minute : 32, Stroke : 180 mm.

989

ID	MA29445
Make	Roche
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 ton, Table : 1000 x 1200 mm, Ram : 1000 x 1000 mm, Stroke : 500 mm.

990

ID	MA29444
Make	Ambrogio Galli
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 120 ton, Stroke : 21 -140 mm, Stroke per minute : 55, 10 HP

991

ID	MA29442
Make	Amada,Japan
Model	NCP80
YOM
Condition	Brand New
Photo	See Photo
Capacity: 80 tons, Stroke: 150 mm, Stroke per minute/ Main motor: with variable 35~80 S.P.M./ VS 100 hP motor, Rated tonnage point: 4.0 mm, Die height: 330 mm, Slide adjustment: 80 mm, Slide area (L.R x F.B): 525 x 450 mm, Bolster area (L.R x F.B): 1000 x 550 mm, Bolster thickness: 100 mm, Shank hole: 50 mm, Die of power take of shaft: 100 x 100 L mm, Hole of bed( L.R x F.B): 540 x 400 mm, Hole of bolster (L.R x F.B): 360 x 180 mm, Frame inside size: 540 mm, Slide adjust device: 0.5 HP, Outline dimensions (approximate): 1430 (W) x 2000 (D) x 3160 (H) mm, Machine weight (approximate): 6500 kgs. Quantity: 8 units

992

ID	MA29437
Make	Verson
Model	S1-1500-60-48-SSSC
YOM	1973
Condition	Good Condition
Photo	See Photo
Capacity: 1500 ton, Bed size: 1500 x 1200 mm, Stroke:450 mm, Shut height: 950 mm, Stroke per minute: 10.5, Windows:725 x 700 mm, 87 ton cushion Link 1100 Tonage monitor Press commander light curtains,scrap exit conveyor

993

ID	MA29410
Make	Smeral,Czech
Model	LEXN100C
YOM	1980
Condition	Good Condition
Photo	See Photo
Force : 100 t, Flight : 270 mm, Stroke : 10-125 mm, Adjustment of the pusher : 90 mm, The number of innings : 75 - 150 Hub/min, Square table : 1000 x 640 mm, Maxim. power consumption of the machine : 8 kW, Dimensions of : 1.6 x 1.8 x 2.3 m, Weight : 10.1 t.

994

ID	MA29387
Make	Komatsu
Model	E2G300
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 250 mm, Stroke per minute : 20 - 60, Bolster : 2500 x 1000 mm, Slide : 2500 x 1000 mm, Die Height : 800 mm, Adjust : 200 mm, Side Opening : 940 mm.

995

ID	MA29375
Make	WMW Erfurt,Germany
Model	PKZVI800
YOM	1983
Condition	Good Condition
Photo	See Photo
Capacity : 800 ton, Table size : 4000 mm X 2500 mm, Distance between columns : 4000 mm, Ram size : 3950 mm X 2500 mm, Ram stroke : 500 mm, Ram adjustment : 500 mm, Strokes per minute : 14, Shut height : 1175 mm, Cushion capacity : 160 ton, Cushion travel : 200 mm, Press weight : 210 ton. Front moving bolster. Die cushion.

996

ID	MA29365
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 500 ton, Stroke: 800 mm, SPM: 12 - 22. Bolster: 3000 x 1300 mm, Slide: 3000 x 1200 mm, Die Height: 840 mm, Adjust: 500 mm, Die Cushion Capacity: 120 ton, Die Cushion Stroke: 300 mm, Cushion Pad: 2600 x 1200 mm.

997

ID	MA29335
Make	AIDA,Japan
Model	C2-16(2)
YOM
Condition	Very good condition
Photo	See Photo
Capacity:160 tons, Bolster: 2020 x 760 mm, Shut Height: 450 mm, Stroke: 200 mm, SPM: 30-55, C frame with transfer and leveler feeder

998

ID	MA29300
Make	AIDA,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 350 mm, Die Height : 700 mm, Stroke per minute : 20 - 40, Max Drawing Depth : 120 mm, Adjust : 100 mm, Bolster : 3000 x 1000 mm, Slide : 3000 x 1000 mm, Die Cushion : 5 ton, Cushion Stroke : 240 mm, Knockout : 1 ton, Knockout Stroke : 120 mm, Main Motor : 45 Kw, This press has a 3000 mm wide moving bolster and a die cushion. The press is supplied with an Orii uncoiler leveler feeder unit, with a capacity of 600 mm wide x 3.2 mm thick. Make : Orii. Type : Uncoiler Leveler Feeder Unit. Coil Thickness : 0.3 - 3.2 mm, Coil Width : 30 - 600 mm, Coil Diameter (External) : 1400 mm, Coil Diameter (Internal) : 508 mm.

999

ID	MA29286
Make	WMW Erfurt,Germany
Model	PKZZI500.2
YOM	1992
Condition	Very good condition
Photo	See Photo
Capacity: 500 ton, Table size: 2800 x 1800 mm, Ram size: 2800 x 1700 mm, Daylight: 1220 mm, Ram: 500 mm,

1000

ID	MA29272
Make	AIDA,Japan
Model	FT-N30G
YOM	1983
Condition	Good Condition
Photo	See Photo
Capacity: 300 Stroke Length:350 mm, Die Height: 700 mm, Stage No: 10 SPM: 2 Axis: 20~40 3 Axis : 20~30 Max Drawing Deoth: 2 Axis: 120 3 Axis: 90 Slide Adjustment: 100 mm, SL: 3000 X 1000 mm, BL: 3000 X 1000 mm, Main Motor: 45 kW, Air Pressure: 5(8) (kgf/cm) O.D.C Equipment Spec Max Flame Weight: 8 (ft) Max Pulling-put: 2600 mm, Stopping Time: 273 (ms), Max Stopping Time: Handling Type: 273 Beam Type :278 Overrun Detector: 12� �3� Transfer Equipment Spec Feed Stroke: 300 mm, Clamp Stroke: 120 mm, Lift Stroke: 60 mm, Feed Bar (In Clamp): 500 � 600 mm, Feed Level: 400 mm, CCS Level Feed Code: LCC06HECAX, Stock Thickness: 03 ~ 0.2 mm, Stock Width: 30 ~ 600 mm Coil Weight *MAX: 3,000 kgf Line Speed Max: 20 m/mm Power 3 Phase: 200 V 50 HZ, Year: 1983 September Serial No.:83-50 Leveler Roller Length: 620 mm Main Motor Capacity: 3.7 kW Floor Stock Height: 1,140 mm Main Body Weight: 2,500 kgf Uncoiler Coil Inner Diameter: 508 mm Coil External Diameter: 1,400 mm Main Shaft Motor Capacity: 1.5 KW

1001

ID	MA29264
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton, Stroke : 500 mm, SPM : 15, Bolster : 2800 x 1600 mm, Slide : 2800 x 1600 mm, Shut Height : 1000 mm, Adjust : 500 mm, Die Cushion Capacity : 100 tons, Die Cushion Stroke : 250 mm, Cushion Pad : 950 x 11480 mm x 2.

1002

ID	MA29263
Make	Komatsu
Model	E2S300
YOM
Condition	Good Condition
Photo	See Photo
H Frame Press. Capacity : 300 ton, Stroke : 600 mm, Die Height : 1200 mm, Bolster : 2000 x 1200 mm, Die Cushion. Moving Bolster : Left Moving x 2. 2 side moving bolsters, With die cushions.

1003

ID	MA29227
Make	USI Clearing
Model
YOM
Condition	Good Condition
Photo	See Photo
Double Straight Capacity: 270 Tons, Table: 2500 X 1500 mm, Stroke: 400 mm, Adjustment ram : 310 mm Height of tool mini 605 mm, maxi 915 mm strokes per minute a little more than 20 Rpm machine with 2 cushions 20 Tons in Table

1004

ID	MA29197
Make	Hitachi,Zosen
Model	S2-4000-300-78
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 4000 ton, Stroke: 500 mm, Die height: 1550 mm, Speed: 8 spm, Bolster: 7620 x 1980 x 350 mm, Slide: 7620 x 1980 mm, Adjustment slide: 500 mm, Die cushion stroke: 250 mm, Size: 10240-3100-14225 mm, Cushion pad: 990 x 1080 mm, Pad to bolster between distance: 10 mm, Capacity of balancer: 19 ton, No. of die cushion pad: 7 Die cushion capacity: 441 ( 63 x 7) ton, Weight of machine approx: 300-400 ton.

1005

ID	MA29178
Make	USI Clearing
Model	S4-1000-180-90
YOM	Overhaul 2007
Condition	Good Condition
Photo	See Photo
PRESS DESIGN :- Frame design : H-frame, Openings in uprights : yes, Number of con-rods / cylinders : 4, Number of slide actions : 1, Table cushion : yes. PRESS FORCES :- Total force (nominal) : 1000 ton, PRESS TABLE :- Table surface (left-right) : 4572 mm, Table surface (front-back) : 2286 mm, Thickness of bolster plate : 305 mm, Number of T-slots : 15, Distance between T-slots : 300 mm, Distance between ejector holes : 150 mm, SLIDE :- Slide force : 1000 ton Table surface (left-right) : 4572 mm, Table surface (front-back) : 2282 mm, Stroke : 864 mm, Stroke rate (max.) : 15 /min, SLIDE (MECHAN. PRESS) :- Number of con-rods / cylinders : 4, Slide adjustment : 356 mm, Autom. Slide adjustment, Hydraulic overload protection, SLIDE EJECTOR / CUSHION :- Stroke : 152 mm, Force : 184 to DIE CUSHION (TABLE CUSHION) :- Number of cushions : 2, Cushion force : 250 ton, Stroke : 305 mm, Working principle pneumatical, TOOL ASSEMBLY DIMENSIONS :- Shut height (stroke down, adjustment up), TDC : 1224 mm, Distance between columns (H-frame) : 4620 mm, Passline opening (free passage in side columns) : 1830 mm, Free passage between side columns (height) : 1321 mm, ELECTRICAL SPECIFICATIONS Mains voltage : 400 V, Mains frequency : 50 Hz, DIMENSIONS / WEIGHTS :- Total weight approx : 390000 kg ATTACHMENTS (PRESSES) :- Hydraulic overload protection yes, Autom. Slide adjustment yes, Press automation optional. OPTIONS :- o robot automation ABB, o blank lubrication system KLASCHKA, Controls : PLC SIEMENS S7.

1006

ID	MA29158
Make	Danly
Model	S2-400-3050x1220
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Stroke: 662 mm, Slide regulation: 610 mm, Stroke/min: 10-20 Daylight: 1.982 mm, Moving table dimensions: 3.050 x 1220 mm, Lateral window: 1600 mm, Main motor: 100 Kw, PLC siemensL S7 400, 1 single press and each press complete of n.2 (two) lateral moving bolster

1007

ID	MA29155
Make	GDC
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 350 ton, The run: 300 mm, Size plan: 1200 x 900 mm, Opening between uprights: 1200 mm, Cycles to the minute max: 22, Sleight engine power: 2.2 kw, Principal motor power: 18.5 kw.

1008

ID	MA29154
Make	WMW Erfurt,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 400 ton, Table size: 2800 x 2200 mm, Cushion: 100 TM, Table distance: 150 mm,

1009

ID	MA29118
Make	AIDA,Japan
Model	PDA15H
YOM	1976
Condition	Good Condition
Photo	See Photo
Stroke per minute: 60-150, Die height: 420 mm, Stroke length: 1200 x 750 mm, Adjustment: 100 mm, Bed size: 1380 x 900 mm

1010

ID	MA29108
Make	Shimomura
Model	DCLP400-25A
YOM	1985
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Stroke : 450 mm, Die Height : 780 mm, Stroke Per Minute : 20, Bolster size : 2500 x 1500 mm. With die cushion. Qty : 2 nos.

1011

ID	MA29096
Make	AIDA,Japan
Model	PDA15H
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 150 ton, Slide stroke : 250 mm, Strokes per min : 50~120, Slide area L.R X F.B : 2000 x 600 mm.

1012

ID	MA29095
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton, Dimensions of the table: 2.5 m by 1.2 m, Press mass weight: 85 tons.

1013

ID	MA29077
Make	Komatsu
Model	OBS200-5K3
YOM	1997
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, Stroke per minute : 25-50, Die height : 480 mm, Electric adjustment : 120 mm, Slide length : 850 x 650 mm, Bolster length : 1450 x 840 x 190 mm, Die Cushion, DATE make NC Feeder /NCF-01-550OK(Sheet width MAX550・Thickness0.5-3.2・FFeed Roll Dia 95.6φ) DATE make Leveler /LN9-550U(Sheet width MAX550・Sheet thickness 0.5-3.2・callibration eff. 1500mm2) DATE make Uncoiler /RM5000-550 Coil weight 5000kg Coil width Max550 Coil Internal dia 508φ Coil external Dia 1400φ.

1014

ID	MA29075
Make	Danly
Model	S4-1500-156-72
YOM	1963
Condition	Good Condition
Photo	See Photo
Capacity : 1500 ton. Bolster : 3900 R-L x 1800 F-B Bolster thickness : 300 mm, Stroke : 900 mm, Slide Adjustment : 400 mm, Shut height SDAU :1725 mm, SDAD : 1325 mm with 487.5 mm bolster, Window : 1362.5 mm wide. Stroke per minute : 21. There are no cushions.

1015

ID	MA29074
Make	A.Colombo
Model	4-1500M
YOM	1989
Condition	Good Condition
Photo	See Photo
Capacity: 1500 ton, Slide stroke: 160 mm, Strokes X minute: 20-60 min, Shut height: 1200 mm, Slide adjustment: stroke: 80 mm, Bed size: 2240 x 2100 mm, Slide area: 2200 x 2000 mm, Power of main motor: 120 KW, Press weight about: 150 ton, Manual strokes per minute: 4-10 MR, Free window lateral: 800 mm, Number of connecting roads: 4 , Mold height: 1020 mm.

1016

ID	MA29073
Make	AIDA,Japan
Model	PDA80L
YOM	1991
Condition	Good Condition
Photo	See Photo
Machine capacity: 80 ton, Slide stroke: 25 mm, Slide stroke per minute: 160~400, Die height: 300 mm, Slide adjust: 50 mm, Slide L.R x F.B: 800 x 450 mm, Bolster L.R. x F.B.: 900 x 600 mm, Voltage: 200 V

1017

ID	MA29072
Make	Manzoni
Model	T1500-4MR.CE
YOM	2000
Condition	Good Condition
Photo	See Photo
Capacity: 2000 ton, Slide stroke: 300 mm, Strokes X minute: 20-60 min, Shut height: 900 mm, Slide adjustment: stroke 160 mm, Bed size: 2400 x 2200 mm, Slide area: 2250 x 2200 mm, Upright opening: 2500 x 2350 mm, Power of main motor: 134 KW, Press weight about: 236 ton, Work thickness: 12 mm, Manual strokes per minute: 4-10 MR, Free window lateral: 1450 x 1200 mm,

1018

ID	MA29068
Make	Danly
Model	S4-1600-160
YOM	2009
Condition	Good Condition
Photo	See Photo
Capacity: 1000 ton Stroke: 900 mm Die Height: 1200 mm Speed: 10-20 spm Bolster: 3000 mm X 2000 mm X mm Slide: 3000 mm X 2000 mm Slide Adjustment Stroke: 450 mm Die Cushion Capacity:160 ton Die Cushion Stroke: 300 mm Bolster Movement right/left movement Main motor: 187.5 kW x 3 P Die cushion pad: 2200 mm x 1300 mm

1019

ID	MA29060
Make	AIDA,Japan
Model	PD20
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, Stroke per minute : 20, Die Height : 650 mm, Bolster : 2000 x 1200 mm, Slide : 1830 x 1000 mm, Adjust : 400 mm.

1020

ID	MA29058
Make	OKK
Model	DCM200B
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, Stroke Per Minute : 25, Die Height : 600 mm, Bolster : 1800 x 1200 mm, Slide : 1650 x 1000 mm, Adjust : 150 mm, Die Cushion.

1021

ID	MA29053
Make	TMP Voronezh Russian
Model	K3539
YOM	1980
Condition	Good Condition
Photo	See Photo
800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons

1022

ID	MA29050
Make	WMW Erfurt,Germany
Model	PKZZIV500FS
YOM
Condition	Good Condition
Photo	See Photo
Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm

1023

ID	MA29013
Make	AIDA,Japan
Model	PS50(2)
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton, Stroke : 150 mm, Stroke per minute : 40, Bolster : 1100 x 1200 mm, Slide length : 1100 x 1100 mm, Die Height : 650 mm, Adjust : 140 mm.

1024

ID	MA29012
Make	AIDA,Japan
Model
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity : 350 Ton, Stroke per minute : 20, Die height : 950 mm, Adjust : 400 mm, Slide stroke : 2500 x 1520 mm, Bolster : 2500 x 1520 x 190 mm, Die cushion stroke : 250 mm, Cushion : 80 ton. Qty : 2 nos.

1025

ID	MA29011
Make	AIDA,Japan
Model	PD20
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 200 ton, Stroke : 300 mm, Stroke per minute : 18~34, Die Height : 550 mm, Adjust : 200 mm, Slide length : 1830 x 1000 mm, Bolster : 2000 x 1220 mm, Die cushion stroke :250 mm. Qty : 4 nos.

1026

ID	MA29010
Make	Natori,Japan
Model
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity : 350 ton, Stroke per minute : 20, Die Height : 950 mm, Adjust : 400 mm, Slide length : 2500 x 1520 mm, Bolster : 2500 x 1520 x 190 mm, Die Cushion stroke : 250 mm, Cushion : 80 ton, Qty : 2 nos.

1027

ID	MA29009
Make	AIDA,Japan
Model	SMX-L2-300M(2)
YOM	1989
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 300 ton, Ram Stroke : 46 mm, Stroke Per minute : 15~30, Die height : 675 mm, Adjust : 200 mm, Slide : 2450 x 1250 mm, Bolster : 2450 x 1400 mm. (Column Type).

1028

ID	MA29008
Make	Amada,Japan
Model	TPW300
YOM	2005
Condition	Good Condition
Photo	See Photo
C Frame Press. W link press. Capacity : 300 ton, Stroke : 250 mm, Stroke per minute : 20~40, Die Height : 550 mm, Adjust : 120 mm.

1029

ID	MA29007
Make	Amada,Japan
Model	TPW200
YOM	2006
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Ram Stroke : 250 mm, Stroke per minute : 22~45, Die Height : 500 mm, Adjust : 110 mm, Slide length : 1850 x 650 mm, Bolster : 2400 x 850 mm.

1030

ID	MA29006
Make	Amada,Japan
Model	TPL200L
YOM	1992
Condition	Good Condition
Photo	See Photo
C Frame Press. Link Press. Capacity : 200 ton, Ram Stroke : 300 mm, Stroke per minute : 25~40, Die height : 460 mm, Adjust : 110 mm, Die Cushion.

1031

ID	MA29005
Make	AIDA,Japan
Model	NC2-200(2)
YOM	1994
Condition	Good Condition
Photo	See Photo
C Frame Presses. Capacity : 200 ton, Ram Stroke : 250 mm, Stroke per minute : 20~45, Dia Height : 500 mm, Adjust : 110 mm.

1032

ID	MA29004
Make	AIDA,Japan
Model	NC1-200(2)
YOM	1990
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Stroke : 250 mm, Stroke per minute : 25~45, Die Height : 450 mm, Adjust : 110 (Electric), CB, CA.

1033

ID	MA29003
Make	AIDA,Japan
Model	NC1-200(2)
YOM	1987
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Ram Stroke : 250 mm, Stroke per minute : 25~45, Die Height : 450 mm, Adjust : 110 (Electric), CB CA.

1034

ID	MA29002
Make	Komatsu
Model	OBW250-3
YOM	1996
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 250 ton, Stroke : 300 mm, Stroke per minute : 20~40, Die Height : 450 mm, Bolster : 2700 x 950 mm.

1035

ID	MA29001
Make	Komatsu
Model	OBW200
YOM	1988
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Stroke : 250 mm, Stroke per minute : 20~40, Die Height : 500 mm, Adjust : 120 (electr), Bolster : 2400 x 850 x 160 mm, Slide Length : 1850 x 650 mm.

1036

ID	MA29000
Make	Amada,Japan
Model	TPW200
YOM	1995
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Ram Stroke : 250 mm, Stroke per minute : 25~45, Die Height : 500 mm, Bolster : 2400 x 850 mm, Slide length : 1850 x 650 mm, Adjust : 110 mm. (Electric).

1037

ID	MA28999
Make	AIDA,Japan
Model	NC2-25(2)A
YOM	1984
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 250 ton, Ram Stroke : 280 mm, Stroke per minute : 20~35, Dia Height : 550 mm, Adjust : 120 mm, Slide Length : 2100 x 700 mm, Bolster : 3050 x 920 (pic hole), VS, DC.

1038

ID	MA28997
Make	AIDA,Japan
Model	C2-25(2)
YOM	1977
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 250 ton, Ram Stroke : 280 mm, Stroke per minute : 20~30, Die height : 550 mm, Adjust : 120 mm, Slide length : 2100 x 700 mm, Bolster : 2700 x 920 mm (pic hole), VS.

1039

ID	MA28996
Make	Washino
Model	PUX200
YOM	1984
Condition	Good Condition
Photo	See Photo
C Frame Press. Capacity : 200 ton, Stroke : 300 mm, Stroke per minute : 25-35. Dia height : 500 mm, Adjustment : 110 mm, Slide length : 850 x 630 mm, Bolster : 1450 x 850 mm, (pin hole), VS, DC.

1040

ID	MA28995
Make	AIDA,Japan
Model	NC2-200(2)
YOM	1993
Condition	Good Condition
Photo	See Photo
C Frame Presses. Capacity : 200 ton, Stroke : 250 mm, Stroke per minute : 25-45 spm, Die Height : 500 mm, Adjustment : 110 mm, Transfer Feeder.

1041

ID	MA28983
Make	Komatsu
Model	E2Q500
YOM	1989
Condition	Good Condition
Photo	See Photo
S: 710,12~22 spm, Die height; 1000 mm, SL: 2500 x 1600 mm, BL: 2500 x 1700, Quantity: 4 nos.

1042

ID	MA28982
Make	AIDA,Japan
Model	PD30
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 450 mm, Stroke Per Minute : 25 spm, Dia Height : 675 mm, Bolster : 2100*1350 mm. Qty : 5 nos.

1043

ID	MA28981
Make	Komatsu
Model	E2G300
YOM	1989
Condition	Good Condition
Photo	See Photo
Die height: 840 mm, BL: 2500 x 1500, Table size: 2500 x 1500 mm, S:450,15~25 spm, Quantity: 3 nos

1044

ID	MA28980
Make	Komatsu
Model	E2G400W
YOM	1990
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Slide height : 450 mm, Stroke per min : 15-30 mm, Die height : 850 mm, Die Adjustment : 400 mm, Slide Length : 25001300 mm, Bed : 25001290*190 (thickness).

1045

ID	MA28979
Make	Amada,Japan
Model	PMX-L2-6000(1)-305-140
YOM	2015
Condition	Good Condition
Photo	See Photo
Capacity : 600 ton, Slide height : 305, Stroke per minute : 25-60, Die Height : 700 mm, Slide adjustment : 150 mm, Table size : 3050 x 1400 mm. Qty : 2 nos.

1046

ID	MA28963
Make	Komatsu
Model	E2G300
YOM	1985
Condition	Very good condition
Photo	See Photo
Capacity : 300 ton, Stroke : 450 mm, Stroke per minute : 10 -20, Die Height : 650 mm, Bolster : 2100 x 1350 mm, Slide : 1900 x 1200 mm, Adjust : 200 mm.

1047

ID	MA28957
Make	OKK
Model	DCM300B
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 450 mm, Stroke per minute : 18, Die Height : 800 mm, Bolster : 2130 x 1350 mm, Slide : 1900 x 1200 mm, Adjust : 200 mm, Die Cushion : 50 ton, Cushion stroke : 10 - 225 mm, Pad : 1500 x 800 mm.

1048

ID	MA28942
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 200 ton, Stroke: 300 mm, SPM: 36, Die height:600 mm, Bolster:2500 x 1200 mm, Slide:2500 x 1100 mm, Adjust: 200 mm.

1049

ID	MA28930
Make	OKK
Model	DCM-300BIII
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 450 mm, Stroke per minute : 18, Die Height : 700 mm, Bolster : 2150 x 1350 mm, Slide : 1900 x 1200 mm, Adjust : 200 mm, Main motor : 30 Kw, Die cushion : 50 ton, Pad: 1 Pad Pad Size:1500 x 860 mm Cushion Stroke:225 mm

1050

ID	MA28925
Make	AIDA,Japan
Model	PDM30
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 300 ton, Stroke : 600 mm, Stroke per minute : 14, Die Height : 600 mm, Bolster : 2130 x 1870 mm, Slide: 1900 x 1200 mm, Adjust : 200 mm, Die Cushion : 50 ton, Cushion stroke : 300 mm, Pad : 810 x 880 x 2.

1051

ID	MA28924
Make	Rovetta,Italy
Model	SE2 400-2740X1520
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Bed size:2740 x 1520 mm, Hydraulic overload, Slide stroke:508 mm, Stroke per min:20, With moving bolster.

1052

ID	MA28918
Make	Hitachi
Model
YOM
Condition	Excellent condition,under power
Photo	See Photo
Capacity : 4000 ton, Stroke : 500 mm, Stroke per minute : 8, Die Height : 1550 mm, Bolster : 7620 x 1980 mm, Adjust : 500 mm, Cushion : 104.8 ton, Cushion stroke : 250 mm.

1053

ID	MA28894
Make	Weingarten
Model	VK1000.43.85
YOM
Condition	Very good condition,Under power
Photo	See Photo
Capacity : 1000 Metric Tons / 1100 Tons, Stroke Length : 825 mm, Stroke Per Minute : 8 to 15 (Variable), Bed size : 3.900 x 2.150 mm, (4.175 mm between the uprights), Shut height : 1.475 mm (Over bolster), Adjustment : 350 mm, Windows, Cushions (bed and ram), Siemens press controls Qty : 3 nos.

1054

ID	MA28893
Make	WMW Erfurt,Germany
Model	PKZV800
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 800 ton, Ram stroke : 500 mm, Number of ram stroke min : 10-20 spm, Bed to bolster plate adjustment : 500 mm, Shut height : 1350 mm, Size of bed (moving) : 4000 x 2500 mm, Size of ram : 3950 x 2500 mm, Gap size of table : 3520 x 2500 mm, Cushion power on table : 1600 kn, Table ejector (cushion) : 200 mm, Main drive motor power : 90 kW, Height above floor level approx : 8400 mm, Machine Weight : 220 ton.

1055

ID	MA28889
Make	AIDA,Japan
Model	NC2-250
YOM
Condition	Good Condition
Photo	See Photo
Capacity:250 ton, Stroke:170 mm, SPM: 25-55, Die height:550 mm, Adjust:120 mm, Slide:2100 x 700 mm, Bolster:2700 x 760 mm, Uncoiler leveler feeder unit: Make: Orii, Model: LCC06HPNAX, Thickness:06-6.0 mm, Width: 600 mm, Coil internal:508 mm, Coil external:1500 mm, Coil weight:3000 kgs, Including coil car:2700 x 760 mm.

1056

ID	MA28883
Make	Komatsu
Model	OBS150
YOM
Condition	Good Condition
Photo	See Photo
Capacity:150 ton, Bolster:1250 x 800 mm, Slide:700 x 550 mm,

1057

ID	MA28877
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 mm, SPM:16, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die Height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:35 ton x 2, Cushion stroke:210 mm, Pad size:820 x 920 mm x 2

1058

ID	MA28876
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 mm, SPM:16, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:28 ton x 2, Cushion stroke:240 mm, Pad size:820 x 920 mm x 2

1059

ID	MA28875
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 ton, SPM:16, Bolster: 2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:28 ton x 2, Cushion stroke:240 mm, Pad size:820 x 920 mm x 2

1060

ID	MA28874
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 mm, SPM: 16, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion: 28 ton x 2, Cushion stroke: 240 mm, Pad size:820 x 920 x 2

1061

ID	MA28873
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 ton, SPM:16, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:28 ton x 2, Cushion stroke:240 mm, Pad size:820 x 920 mm x 2

1062

ID	MA28872
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 mm, SPM: 16, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:28 ton x 2, Cushion stroke:240 mm, Pad size:820 x 920 mm x 2

1063

ID	MA28866
Make	Shinohara
Model	PL2-300
YOM
Condition	Good Condition
Photo	See Photo
Capacity:300 ton, Stroke:400 mm, SPM:18, Bolster:2200 x 1440 mm, Slide:2200 x 1300 mm, Die height:700 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:33 ton x 2, Cushion stroke:20-210 mm, Pad size:800 x 950 x 2 mm.

1064

ID	MA28865
Make	Shinohara
Model	PL-400-220
YOM
Condition	Good Condition
Photo	See Photo
Capacity:400 ton, Stroke:400 mm, SPM:16, Bolster:2200 x 1400 mm, Slide:2020 x 1300 mm, Shut height:850 mm, Adjust:200 mm, Main motor:30 Kw, Die cushion:28 ton x 2, Cushion stroke:210 mm, Pad size:820 x 920 mm x2

1065

ID	MA28864
Make	Shinohara
Model	DA30D
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Stroke:300 ton SPM:24, Bolster:2500 x 1500 mm, Slide:2500 x 1400 mm, Die height:600 mm, Adjust:200 mm, Main motor:22 Kw, Die cushion:24 ton x 2, Cushion stroke:160 mm, Pad size:950 x 950 mm.

1066

ID	MA28863
Make	AIDA,Japan
Model	PDC-ST400
YOM
Condition	Good Condition
Photo	See Photo
Capacity:400 ton, Stroke:450 mm, SPM: 15, Bolster:2130 x 1370 mm, Slide: 2130 x 1370 mm, Shut height:860 mm, Adjust:200 mm, Main motor:22 Kw, Die cushion:45 ton, Cushion stroke:230 mm, Pad size:840 x 820 mm.

1067

ID	MA28862
Make	AIDA,Japan
Model	D30
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Stroke: 350 mm, SPM:15-30, Bolster:2500 x 1300 mm, Slide:2400 x 1200 mm, Die height:700 mm, Adjust:200 mm, Main motor:37 Kw.

1068

ID	MA28847
Make	AIDA,Japan
Model	C1-11(2)
YOM	1980
Condition	Good Condition
Photo	See Photo
Capacity:110 ton, Stroke length:180 mm, Stroke per minute:50 spm, Slide area:600 x 520 mm, Bolster area:1080 x 680 mm, Slide adjustment:90 mm, Die height:350 mm, Motor power:7.5 kW, Quantity: 2 nos

1069

ID	MA28834
Make	AIDA,Japan
Model	C2-25
YOM	1978
Condition	Good Condition
Photo	See Photo
Capacity: 250 ton, Stroke length: 170 mm, Stroke per minute: 25~55 spm, Slide area: 2100 x 700 mm, Bolster area: 2700 x 920 mm, Slide adjustment: 120 mm, Die height: 605 mm, Frame type: H, Motor power: 22 kW, Machine weight: 36 ton, Dimension (LxWxH): 3.0 x3.2 x 4.6 mm

1070

ID	MA28833
Make	AIDA,Japan
Model	C2-25
YOM
Condition	Very good condition
Photo	See Photo
Capacity: 250 ton, Stroke: 345 mm, SPM: 20 - 32, Die Height: 700 mm, Adjust: 120 mm, Slide: 2100 x 700 mm, Bolster:2700 x 920 mm, Uncoiler Make:Aida Model: ES3 Coil Width: 600 mm, Coil Weight: 3000 kgs, Transfer Feeder Make: Aida Model: TCV-5, Feed Stroke: 300 mm, Feed Stroke: 350 mm, Feed Stroke: 400 mm, Clamp Width: 350 mm, Clamp Width: 400 mm, Feed Bar Height: 360 mm Number of stages:7. 6. 5. SPM: 20 � 32

1071

ID	MA28779
Make	WMW Erfurt,Germany
Model	PKZZI800
YOM
Condition	Very good condition
Photo	See Photo
Capacity: 800 ton, Number of strokes: 14 min-1, Slide adjustment: 500 mm, Stroke: 500 mm, Shut height: 1050 mm, Table size: 3150 x 1600 mm, Ram size: 3100 x 1600 mm, Cushion in table: 160 ton, Cushion stroke: 200 mm, Distance between columns: 3160 mm, Dimensions of press: 600 x 3000 x 8000 mm, Main motor: 90 kW, Weight approx: 175 ton.

1072

ID	MA28757
Make	Fukui
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton, Stroke : 450 mm, SPM : 12, Bolster : 2550 x 1520 mm, Slide : 2500 x 1500 mm, Shut Height : 1300 mm, Adjust : 500 mm, Die Cushion Capacity : 100 tons, Die Cushion Stroke : 230 mm. Press has a sliding bolster and a die cushion.

1073

ID	MA28689
Make	WMW Erfurt,Germany
Model	PKZZIV315.1TS
YOM	1979
Condition	Good Condition
Photo	See Photo
Max capacity of slide : 315 tons, Press stroke : 400 mm, Close height between table and slide : 750 mm, Table size : 2500 x 1400 mm, Slide size : 2450 x 1400 mm, Free running number : 25, Cushion table capacity : 63 t, Cushion stroke : 160 mm, Main electric motor power : 55 kW, Height above floor, approx. : 6000 mm, Machine weight : 105 000 Kg.

1074

ID	MA28682
Make	TMP Voronezh Russian
Model	KA4537
YOM	1988
Condition	Good Condition
Photo	See Photo
Nominal force : 500 tons, Rated distance of slide above bottom : 12 mm, Slide stroke : 630 mm, Frequency of continuous slide strokes per minute : at least 24, Max. frequency of single slide strokes per minute : 18, Max. distance between bolster plate and slide in its lower position at upper position of adjustment : 1230 mm, Adjustment size of distance between bolster plate and slide : 500 mm, Table dimensions (bolster plate) : -Left-to-right : 3150 mm, -Front-to-back : 1800 mm, Slide dimensions (working area) : -Left-to-right : 3150 mm, -Front-to-back : 1800 mm, Height of moving table with bolster plate : 620 mm, Thickness of bolster plate : 220 mm, Dimensions of side window in columns : -Width : 1900 mm, -Height : 1900 mm, Ejector in slide : -Number of bars : 2, -Max. force on one bar : 80 kN, -Stroke : 150 mm, Pneumatic cushions in press table : -Number of cushions : 2, -Max. total force of 2 cushions : 800 kN, -Full stroke of sliding bar : 300 mm, -Working stroke of sliding bar : 150 mm, -Sliding bar dimensions : -Left-to-right : 1215 mm, -Front-to-back : 1245 mm, Working pressure of compressed air connected to the press : 0,45 MPa, Total consumption of compressed air per stroke in a single mode : 30 dm�, Max. weight of tool attached to slide : 14000 kg, Max. total weight of tool moved by the moving table : 30000 kg, Main drive electric motor power : 90 kW, Press dimensions :- Left-to-right : 5500 mm, Front-to-back : 4550 mm, Press height : Above floor level : 7540 mm, Total : 10930 mm, Press weight : 170000 kg.

1075

ID	MA28658
Make	Innocenti
Model	S4-900-180-96
YOM
Condition	Dismantled,Good condition
Photo	See Photo
Capacity : 900 ton, Ram Stroke : 940 mm, Shut height : 1408 mm, Ram adjustment : 762 mm, No of stroke : 16 min, Pneumatic cushion : 3, Pneumatic cushion stroke : 305 mm, Total cushion capacity : 96 ton, Table size : 4500 x 2400 mm, With moving bolster.

1076

ID	MA28646
Make	Rovetta,Italy
Model
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity : 800 ton, Stroke : 508 mm, Slide regulation : yes, Stroke per min: 14-16 min, Daylight : 1020 mm, Table dimension : 3350 x 1700 mm, Capacity : 138 ton, Stroke (regulation) : from 104 mm to 254 mm.

1077

ID	MA28645
Make	Rovetta,Italy
Model
YOM	1979
Condition	Good Condition
Photo	See Photo
Capacity : 500 ton, Stroke : 508 mm, Slide regulation : yes, Stroke per min: 16-18 min, Daylight : 915 mm, Table dimension : 2750 x 1600 mm, Capacity : 80 ton, Stroke (regulation) : from 104 mm to 254 mm.

1078

ID	MA28632
Make	Manzoni
Model	2MR400.125
YOM	1995
Condition	Good Condition
Photo	See Photo
Capacity : 400 ton, Slide stroke : 125 mm, Stroke per minute : 34-100 min, Hydraulic overload, Shut height : 700 mm, Slide adjustment : 200 mm, Bed size : 1600 x 1000 mm, Slide area : 1500 x 1000 mm, Upright opening : 800 mm, Power of main motor : 48/16 kW, Height above floor of table : 1100 mm, Max height above floor : 4685 mm, Overall dimensions : 2730 x 3150 x 4685 mm, Press weight about : 47 ton, PLC Siemens S7/300. Pilz P2HZ5, Static load : 470 Kn, Dynamiv load : 540 Kn, Specific load : 318 kn, Electrical cabinet : 1600 x 600 x 2100 H.

1079

ID	MA28604
Make	Kobe,Japan
Model	S4-1500
YOM	1964
Condition	Good Condition
Photo	See Photo
Capacity: 1500 ton, Stroke: 600 mm, Die height: 1500 mm, SPM: 15-18, Slide adjustment: 650 mm, Bolster size: 4200 x 2460 mm, With front moving bolster, With die cushion: 200 ton, 1 pad,2 cylinder, Stroke 0-265 mm ( max.300 mm)

1080

ID	MA28603
Make	WMW Erfurt,Germany
Model	PKZZIV500.IFS
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity : 500 t, Table surface : 2800 x 1800 mm, Ram surface : 2800 x 1700 mm, Stroke : 500 mm, Slide adjustment : 500 mm, Shut height ca. : 1100 mm, Main motor : 75 kW, Number of strokes : 20 s.p.m. Cushion in bed : 100 t, Cushion stroke : 200 mm, Height over floor ca. : 7600 mm, Weight of the press ca. : 145 t. Centres of pressure : 2.

1081

ID	MA28600
Make	WMW Erfurt,Germany
Model	PKZVI1250FS
YOM	1980 Installed 1981
Condition	Good Condition
Photo	See Photo
Capacity : 1250 tons , Number of connecting points of ram : 4 , Drawing device capacity : 350 tons, Ram stroke : 630 mm, Ram adjustment : 630 mm, Stroke per minute :11 SPM, Table area : 4000 x 2500 mm, Slide area : 4000 x 2500 mm, Distance between columns : 4050 mm, Shut height : 1250 mm, Opening in bed : 3320 x 1540 mm, Cushion capacity : 250 tons, Cushion stroke : 0-250 mm, Ejection force : 40 tons, Overload protection : 40 tons, Main drive : 132 kW, Height above floor : 9700 mm, Moving bolster, Pneumatic cushion and overload protection.

1082

ID	MA28580
Make	WMW Erfurt,Germany
Model	PKZZIV500FS
YOM	1984
Condition	Good Condition
Photo	See Photo
Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm. Double crank sheet metal stamping press is intended for cold forming of sheet specified for drawing, bending and cutting parts, for instance: coverings, door, parts of the car body and so on. with moving bolster. Qty : 2 nos

1083

ID	MA28572
Make	Danly
Model	S4-800-110-72
YOM	1970
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Ram: 610 mm, Adjustment: 510 mm, Stroke minute: 0-18 Variable, Bed size: 2800 x 1849 mm, Weight: 160 kg. With PLC Siemens. Qty : 5 presses.

1084

ID	MA28556
Make	WMW Erfurt,Germany
Model	PKZZI800
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Number of strokes: 14 min-1, Slide adjustment: 500 mm, Stroke: 500 mm, Shut height: 1050 mm, Table size: 3150 x 1600 mm, Ram size: 3100 x 1600 mm, Cushion in table: 160 ton, Cushion stroke: 200 mm, Distance between columns: 3160 mm, Dimensions of press: 600 x 3000 x 8000 mm, Main motor: 90 kW, Weight approx: 175 ton.

1085

ID	MA28505
Make	WMW Erfurt,Germany
Model	PKZZ250/2500
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 250 tons, Ram stroke : 400 mm, No. of strokes : 25/min., Ram adjustment : 120 mm, Shut height : 720 mm, Bed 2500 x 1400 mm, Windows in bed : 2300 x 850 mm, Ram : 2320 x 1250 mm, Main drive motor : 32 kW.

1086

ID	MA28496
Make	TMP Voronezh Russian
Model	K3047
YOM	1991
Condition	Good Condition
Photo	See Photo
Capacity: 5000 ton, Stroke:750 mm, Table size: 5400 x 2100 mm, Day light sdau: 1572 mm, Adjustment: 350 mm, Lateral window: 1805 x 1805 mm, Main motor power: 215 kw, Machine weight: 800 kg

1087

ID	MA28477
Make	TMP Voronezh Russian
Model	KA3539
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 800 tons, Ram stroke : 320 mm, Stroke per minute : 20 ram strokes/min, Shut height : 900 mm, Bed to ram adjustment stroke : 320 mm, Bed dimensions : 2500 x 1600 mm, Ram dimensions : 1400 x 1400 mm, Bolster plate thickness : 250 mm, Main drive motor power : 75 kW, Overall dimensions : 4220 x 3500 x 8356 mm, Mass : 97. 6 tons. Qty : 2 nos.

1088

ID	MA28466
Make	Schuler German
Model
YOM
Condition	overhauled
Photo	See Photo
Capacity : 500 ton, N.4 connecting rods : 2250 x 1000 mm, Width between shoulders : 4000 mm, Table dimensions : 3700 x 2200 mm, Stroke : 305 mm, Regulation : 508 mm, Stroke per minute : n 15 - 40, Gap : 989 mm, Moving bolster : H1000 mm, Total Weight : 124 ton.

1089

ID	MA28438
Make	Komatsu
Model
YOM	1977
Condition	Good working condition
Photo	See Photo
Capacity : 500 ton, Stroke : 550 mm, Die Height : 1100 mm, Adjust : 550 mm, Stroke per minute : 20, Bolster : 3000 x 1850 mm, Bolster : Moving x 2, side moving, Slide : 3000 x 1850 mm, Die Cushion (1 pad, 2 cylinders) : 150 ton, Cushion Stroke : 250 mm, Motor : 55 Kw.

1090

ID	MA28407
Make	WMW Erfurt,Germany
Model	PKZZI800
YOM	1981
Condition	Good Condition
Photo	See Photo
Capacity: 800 ton, Number of strokes: 14 min-1, Slide adjustment: 500 mm, Stroke: 500 mm, Shut height: 1050 mm, Table size: 3150 x 1600 mm, Ram size: 3100 x 1600 mm, Cushion in table: 160 ton, Cushion stroke: 200 mm, Distance between columns: 3160 mm, Dimensions of press: 600 x 3000 x 8000 mm, Main motor: 90 kW, Weight approx: 175 ton.

1091

ID	MA28404
Make	TMP Voronezh Russian
Model	KA4537
YOM	1987
Condition	Good working condition
Photo	See Photo
Capacity : 500 tons, Table size : 3200 x 1700 mm, Ram stroke : 630 mm, Shut height : 1850 mm, Stroke per minute : 18 SPM, Main motor : 100 kW, Dimensions : 6305 x 5010 x 8380 mm, Weight : 192.

1092

ID	MA28374
Make	WMW Erfurt,Germany
Model	PKZZI315-2500
YOM
Condition	Good Condition
Photo	See Photo
Max Capacity : 315 ton, Table size : 2500 x 1400 mm, Slide stroke : 400 mm, Slide stroke per 1 min : 25, Slide adjustment : 400 mm, Slide area : 2450 x 1400 mm, Distance between columns : 2500 mm, Table height over floor : 480 mm, Daylight : 1080 mm, Shut height (stroke down-adjustment up): 900 mm, Die cushion capacity : 63 ton, Die cuschion stroke : 160 mm, Voltage : 380 V, Main motor power : 45 kW, Total power requirement: 70 kW, Press dimensions : 4300 x 2500 x 6000 mm, Weight of the machine : 60 ton, Quantity: 4 nos

1093

ID	MA28344
Make	TMP Voronezh Russian
Model	K3535A
YOM	2000
Condition	Good working condition
Photo	See Photo
315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons.

1094

ID	MA28338
Make	Manzoni
Model	Unused
YOM	1998
Condition	Good Condition
Photo	See Photo
Capacity : 315 t, Stroke adjustable : 80 - 315 mm, Ram adjustment : 0 - 200 mm, Shut height (stroke down, adjustment up) : 750 mm, Number of strokes : 20 - 60 spm, Table surface : 2600 x 1250 mm, Ram surface : 2600 x 1000 mm, Dimensions : 4800 x 3440 x 6442 mm, Machine weight ca. : 90 t.

1095

ID	MA28334
Make	WMW Erfurt,Germany
Model	PKZZI800
YOM
Condition	Good condition,under power
Photo	See Photo
Capacity : 800 t, Number of strokes : 14 min-1, Slide adjustment : 500 mm, Stroke : 500 mm, Shut height : 1050 mm, Table size : 3150 x 1600 mm, Ram size : 3100 x 1600 mm, Cushion in table : 160 t, Cushion stroke : 200 mm, Distance between columns : 3160 mm, Dimensions of press : 6000 x 3000 x 8000 mm, Main motor : 90 kW, Weight approx. : 175 t.

1096

ID	MA28333
Make	Arisa
Model	S2-250-200-100FS
YOM	2007
Condition	Very good condition
Photo	See Photo
Capacity : 250 t, Stroke : 50 � 250 mm, Ram adjustment : 200 mm, Shut height (Stroke down, adjustment up) : 500 mm, Table surface : 2000 x 1000 mm, Ram surface : 2000 x 800 mm, Hole in table : 1500 x 200 mm, Number of strokes : 15 � 80 min-1, Required power : 55 kW, Dimension : 3990 x 1250 x 2000 mm, Weight ca. : 39 t. With SIEMENS S7 control,

1097

ID	MA28332
Make	Arisa
Model	S2-400-240-120FD
YOM	2008
Condition	Very good condition
Photo	See Photo
Capacity : 400 t, Stroke : 400 mm, Ram adjustment : 250 mm, Shut height (stroke down, adjustment up) : 1000 mm, Table surface : 2400 x 1200 mm, Ram surface : 2400 x 1200 mm, Hole in table : 1900 x 330 mm, Number of strokes : 8 � 35 spm, Required power : 90 kW, Dimensions : 3990 x 3350 x 5700 mm, Weight ca. : 65 t. With SIEMENS S7 control,

1098

ID	MA28331
Make	Arisa
Model	S2-630-240-120LD
YOM	2007
Condition	Very good condition
Photo	See Photo
Capacity : 630 t, Stroke : 450 mm, Ram adjustment : 250 mm, Shut height (Stroke down, adjustment up) : 1000 mm, Table surface ca. : 2400 x 1200 mm, Ram surface ca. : 2400 x 1200 mm, Cushion in table ca. : 100 t, Number of strokes : 10 � 24 min-1, Required power : 79 kW, Weight ca. : 135 t.

1099

ID	MA28321
Make	WMW Erfurt,Germany
Model	PKZV800
YOM	1974
Condition	Good Condition
Photo	See Photo
Capacity : 800 ton, Ram stroke : 500 mm, Number of ram stroke min : 10-20 spm, Bed to bolster plate adjustment : 500 mm, Shut height : 1350 mm, Size of bed (moving) : 4000 x 2500 mm, Size of ram : 3950 x 2500 mm, Gap size of table : 3520 x 2500 mm, Cushion power on table : 1600 kn, Table ejector (cushion) : 200 mm, Main drive motor power : 90 kW, Height above floor level approx : 8400 mm, Machine Weight : 220 ton. Qty : 3 nos.

1100

ID	MA28309
Make	TMP Voronezh Russian
Model	K3540
YOM	1976
Condition	Good Condition
Photo	See Photo
Capacity : 1000 tons, Ram stroke : 400 mm, Stroke Per Minute : 20, Shut height : 1060 mm, Adjustment : 320 mm, Ram dimensions : 3150 x 1700 mm, Bolster plate thickness : 260 mm, Height above floor level : 7830 mm, Main motor power : 132 kW, Dimensions : 5150 x 4700 mm, Weight : 193 tons.

1101

ID	MA28308
Make	WMW Erfurt,Germany
Model	PKZZI1250
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 1250 ton, Stroke of the slide : 630 mm, Adjustment of the slide : 630 mm, Shut height (stroke down; adjustment up) : 1165 mm, Table size : 4000 x 1800 mm, Slide size : 3950 x 1800 mm, Hole in the table : 3750 x 1300 mm, Main motor power : 132 Kw, No of strokes per min : 11, Cushion capacity : 2500 kN, Cushion stroke : 250 mm, Height over the floor : appr .9500 mm, Weight : 240 Ton.

1102

ID	MA28249
Make	AIDA,Japan
Model	C1-20(1)
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 200 tons, Stroke : 160 mm, Stroke per minute : 35 - 65, DH : 410 mm, Bolster : 1420 x 840 mm.

1103

ID	MA28218
Make	Weingarten
Model	VK500.34.85
YOM	1974
Condition	Good Condition
Photo	See Photo
Link drive presses. Capacity : 500 ton, No of stroke : 9-18, Bed size L/R x F/B : 3100 x 1900 mm, Stroke area L/R x F/B : 3100 x 1900 mm, Shut height : 1200 mm, Stroke of slide : 850 mm, Slide adjustment : 350 mm, Upper draw cushion force : 700 kn, Upper draw cushion stroke : 150 mm, Lower draw cushion force : 1400 kn, Lower draw cushion stroke : 0-250 mm, Machine size L x W x H : 5100 x 2900 x 8300 mm, Voltage : 380/50 V/Hz, Machine Weight : 145 ton. Equipped with :- Schuetz Hardware press control. 2 Die cart per press. Qty : 4 nos.

1104

ID	MA28214
Make	Verson Wilkins
Model	S4-400-108-60
YOM	1960/Refurbished 1980
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton, Strokes: 400 mm, Table: 2700 x 1500 mm, Adjustment: 600 mm, Max. shut height: 825 mm, Min shut height: 225 mm, Stroke per minute: 16, Cushion: 100 ton, Cushion stroke: 200 mm, Quantity: 4 nos.

1105

ID	MA28108
Make	TMP Voronezh Russian
Model	KB3537
YOM	1983
Condition	Good Condition
Photo	See Photo
Capacity : 500 tons, Slide stroke : 250 mm, No. of strokes/min 25 Shut height 750 mm Table dimensions : 2500 x 1400 mm, Slide dimensions : 2380 x 1200 mm, Main motor power 47 kW Overall dimensions : 4350 x 2470 x 5660 mm, Height above floor : 5660 mm, Press weight : 70 tons.

1106

ID	MA28075
Make	Erfurt
Model	PKZVI800FS
YOM	1986
Condition	Good Condition
Photo	See Photo
Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton

1107

ID	MA28068
Make	Clearing Innocenti
Model	S2-400-108-60
YOM	1970
Condition	Good working condition
Photo	See Photo
Capacity : 400 ton, Stroke : 610 mm, Adjustment : 305 mm, Stroke per min : 20, Daylight stroke down adj up : 1018 mm, Cushion stroke : 203 mm, Cushion capacity : 70 ton, Lateral moving bolster : 2743 x 1524 mm, Weight of press : 125 ton, Quantity : 2 Nos.

1108

ID	MA28022
Make	Rovetta,Italy
Model	SE2-300-1520-1220
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 300 ton, Slide stroke: 254 mm, Connecting rods: 2, Stroke per min: 30, Slide height regulation: 254 mm, Vertical gap S.D.A.U.: 660 mm, Table dimensions: 1520 x 1220 mm, Cushion pressure: 50 ton, Cushion stroke: 127 mm, main engine power: 30 kW, Usefull working power: 1800 kgm



from	to

from	to
Apply Filter

VKengg.co.in

Category : Sheet Metal

Sub-Category : Press Sheet Stamping Mechanical