Category : Sheet Metal

Sub-Category : Press Sheet Stamping Mechanical Double Action

Total Machines Found : 3

Select | Machine Details
 
  1
IDMA36249
MakeFukui
Model
YOM1986
ConditionGood Condition
PhotoSee Photo  |  See Video
DFE 800 x 500
Inner Capacity - 800 Ton
Outer Capacity - 500 Ton
Inner Capacity Generation Position 13mm above Bottom Dead Center
Outer Capacity Generation Position 6.5mm above Bottom Dead Center
Inner Stroke Length - 965 mm
Outer Strong Length - 694 mm
Stroke per Minute 9,18 spm
Inner slide adjustment 650mm
Outer Slide adjustment 500 mm
Inner Die Height 1800 mm
Outer Die Height 1600 mm
Inner Slide Area 3000 x 1550 mm
Outer Slide Area 3400 x 2000 mm
Bolster Area 3400 x 2000 x 275 mm
Air Pressure 5.0 kg/cm
Main Motor 110/55kw 4/8 poles
Motor spec. for Adjustment 7.5 kw 6 poles
Stopping Time 380 ms
Maximum stop time (Light System) 400 ms
Overrun monitoring device setting position 15 degree
 
  2
IDMA32849
MakeWMW Erfurt,Germany
ModelPKnVTVI800.1/3150FS
YOM1977
ConditionGood Condition
PhotoSee Photo
Operating voltage 380 V, frequency 50 Hz.
Total power consumption N (kW) I (A)
Whole press 199 390
Including main electric motor 160 305
Starting current is 2.5 times higher than the rated current.

Press Power Data
1) The number of pressure centers of the relative internal slider: 4
2) The maximum force of the internal slider (25 mm from the end of the stroke): 500 tf
3) The maximum force of the internal slider (at 355 mm end of stroke): 200 tf
4) The maximum force of the outer slider (10 mm from the end of the stroke): 315 tf
5) Hydraulic overload fuse of the internal slide,adjustable: 250-500 tf
6) Hydraulic overload fuse of the external slider,
force at individual pressure centers is adjustable 40-78.75 tf
7) The number of idling in continuous mode: 16 min – 1
8) The micro-drive lift time is about 6 minutes.
9) The electric motor to the press drive N = 160 kW.
10) E / engine to the drive slow motion N = 22 kW.
11) The greatest balanced mass of the upper stamp on the inner
slider at 4.5 kgf / cm2 excess pressure in balancing 7.0 t.
12) The greatest balanced mass of the upper stamp on the outer
a slider at 4.5 kgf / cm2 excess pressure in a balancing of 10 tons

Table cushion power data
1) Down force, ejection force 125 tf.
2) The travel of the pillow plate is 355 mm.
3) Adjustment of travel stops 355 mm.
4) The dimensions of the pillow plate are 2480 x 1580 mm.
Main dimensions
1) The distance between the posts is 3150 mm.
2) The stroke of the internal slider is about 800 mm.
3) The stroke of the outer slider is about 630 mm.
4) The maximum drawing depth is 355 mm.
5) Moving both sliders at 500 mm.
6) Max. the distance between the die plate and the inner slider is 1750 mm.
7) Max about the distance between the sub-die plate and the outer slider is 1500 mm.
8) The height of the drawer is 600 mm.
9) Table dimensions 3150 x 2100 mm.
10) The hole in the table is 2500 x 1600 mm.
11) Dimensions of the internal slider 2500 x 1600 mm.
12) The dimensions of the outer slider are 3150 x 2100 mm.
Press Weight Data
- total weight 275 tons
 
  3
IDMA31557
MakeWMW Erfurt,Germany
ModelPKNT315
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 315 ton,
Table: 1400 x 1400 mm,
Blank holder slider: 1350 x 1350 mm,
Drawing slider: 900 x 900 mm,
Distance between columns: 1420 mm
top