V. K. Engineering - Buying & Selling of Machines made easy

Category : Sheet Metal

Sub-Category : Press Transfer

Total Machines Found : 12

Select

| Machine Details

1

ID	MA38190
Make	Benelli
Model
YOM	1983
Condition	Good Condition
Photo	See Photo
Cap. - 350 ton Table/ Slide - 3,350 x 1,250 mm No Stations - 6 Stroke - 400 mm Max. Light - 900 mm Speed - 5 ~ 20 strokes/min

2

ID	MA38136
Make	Erfurt
Model
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
Control: PLC SIEMENS S5 PRESS eccentric / crank drive system H-frame, monoblockframe design openings in uprights 2 suspensions 2 1 slide action 1 table cushion quick die change system feedstock left to right FORCE total force (nominal) 400 ton nominal wo 32 kNm TABLE table surface (left-right 2,600 mm table surface (front-back) 990 mm thickness of bolster plate 200 mm height above floor level 800 mm opening in bed (left-right) 2,250 mm opening in bed (front-back) 280 mm SLIDE slide force 400 ton table surface (left-right) 2,600 mm table surface (front-back) 990 mm stroke 210 mm stroke rate (max.) 90 /min SLIDE (MECHAN. PRESS) slide 150 mm stroke rate (min.) 25 /min stroke rate (max.) 90 /min hydraulic overload protection main drive power 72 kW SLIDE EJECTOR / CUSHION number of ejectors 13 nominal force 3.7 ton stroke 89 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC 705 mm distance between columns (H-frame) 2900 mm passline opening (free passage in side columns) 900 mm free passage between side columns (height) 545 mm COIL CHAIR max. weight of coil 3 ton stroke 550 mm DECOILER single reel, traversable sheet width max 400 mm sheet width (min) 30 mm max. weight of coil 3 ton max. diameter of coil 1,500 mm mandrel expansion range from 460 mm mandrel expansion range up to 530 mm LEVELLER UNIT sheet width max 400 mm sheet thickness max 5 mm sheet thickness (min) 0.5 mm number of leveller rolls 9 dia of leveller rolls 50 mm number of in-/outfeed rolls 2 dia of feed rolls 150 mm loop controls STRIP-FEEDER roll type feeder type roll diameter 120 mm pilot release TRANSFER SYSTEM distance between tools, stroke X max. 300 mm distance between tools, stroke X min. 90 mm Inner width clamping rails closed max. 340 mm ELECTRICAL SPECIFICATIONS mains voltage 400 V mains frequency 50 Hz DIMENSIONS / WEIGHTS height above floor level 6,300 mm total weight approx. 73,000 kg Coil line KOHLER Zig-zag feed 2-axis transfer unit Press force monitoring BRANKAMP cushion mounting bar in table with exchangeable pneumatic cushion units MAYFRAN scrap conveyor (cross conveyor)

3

ID	MA37744
Make	Weingarten
Model
YOM
Condition	Good Condition
Photo	See Photo
STROKE PER MINUTE SPM 16-32 SLIDE STROKE :450MM SLIDE ADJUSTMENT :50 MM DIE HEIGHT :1570MM SLIDE AREA :5000MM1400 MM BOLSTER AREA :5000 MM1400MM MOTOR MAIN:220 KW4P MOTOR -SLIDE ADJ:7.5 KW 4P STATION-8 STROKE :150 MM TRANSFER :3D (X.Y.Z) DRIVE SYSTEM:N/C CONTROL (SERVO 12 AXIS) UNDER POWER

4

ID	MA37372
Make	Komatsu
Model	E4T1800-05-120-MFD
YOM
Condition	Good Condition
Photo	See Photo
Capacity -1800 Ton Slide Stroke 750 mm Die Height 1210 mm (from Bolster top face to slide bottom face) Slide adjustment 170 mm Number of Slide Strokes 8 & 13 ~20 spm Bolster Dimensions (R-L x F-B x Thickness) 6000 x 2200 x 280mm Slide Dimensions (A-L x F-B) 6000 x 2200 mm Balancer Capacity 25 metric ton Main Motor output DC 200KW working energy (at 13 ~ 20 spm) 44t-m (at 8 spm) 8 t-m Bolster Height (from floor to top face of Bolster) 590 mm Transfer Feeder Feed Height (from top face of Bolster) 750mm Feed Stroke (Distance between dies) 1200mm clamp stroke (on each side) 350mm Lift Stroke 200 mm Transfer bar closed inside distance 1000,1300,1600,1900,2200mm Capacity of Die Cushion (Pneumatic type) Station - 1 120 metric ton Stroke (effective) 200mm Pad Dimensions (R-L) x F-B) 850 x 1820 mm

5

ID	MA37368
Make	Manzoni
Model
YOM	1995
Condition	Good Condition
Photo	See Photo
Ton 100 Table - x (mm) 1600 Frame (H/C) H TRANSFER CE Mark NO Inspection NO Conditions WORKING Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) ECCENTRIC Table - y (mm) 1000 Slide - x (mm) 1550 Slide - y (mm) 600 Slide - adjustable stroke (mm) 60-80-122-167-217-251-285-313-334-350 Slide - registration (mm) 20 Piston rods 2 Slide - number of guides 8 Tdc span (mm) 1100 Front span between the pillars (mm) 1700 Lateral window (mm) 800 Die cushion - motion (hydraulic/pneumatic/hydropneumatic) PNEUMATIC Die cushion - number of cushions 7 -13 External dimensions - X (mm) 3000 External dimensions - Y (mm) 1800 External dimensions - height (mm) 4500 Weight (ton) 25 Foundation (cm) NO Electrical components - number of motors 1, WORKING Electrical panel conditions (working/missing/complete inspection/inspection required) STOCK Light barriers (frontal/posterior) NO Safety protections (frontal/posterior) front and rear Accessories / other data mechanical transfer slide - adjustment system adjustment screw

6

ID	MA37367
Make	INVERNIZZI
Model	TRANSFER DM
YOM	1980
Condition	Good Condition
Photo	See Photo
Ton 150 Table - x (mm) 1548 Slide - stroke (mm) 250 Number of strokes/minute 0-40 Frame (H/C) H TRANSFER CE Mark NO Inspection 2005 Conditions WORKING Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly) ECCENTRIC Table - y (mm) 100 Extractable table (frontal/lateral/T-track) -NO Slide - x (mm) 1500 Slide - y (mm) 600 Slide - registration (mm) 20 Piston rods 2 Tdc span (mm) 850 Lateral window (mm) 500 Die cushion - total strength (ton) 8 * 5T Die cushion - motion (hydraulic/pneumatic/hydropneumatic) PNEUMATIC Die cushion - number of cushions 8 External dimensions - X (mm) 2800 External dimensions - Y (mm) 1500 External dimensions - height (mm) 500 Weight (ton) 25 Foundation (cm) NO Electrical components - number of motors 1, WORKING Electrical panel conditions (working/missing/complete inspection/inspection required) NEW, 2005, WORKING Safety protections (frontal/posterior) front and rear slide - adjustment system adjustment screw

7

ID	MA35868
Make	Komatsu
Model
YOM	1990/overhauled in 2008
Condition	Good Condition
Photo	See Photo \| See Video
Capacity: 2500 ton, Tonnage rating point (above B.D.C): 15 mm, Slide stroke: 650 mm, Number per min: 9~25 S.P.M. Die height: 1250 mm, Slide adjustment: 225 mm, Slide area: 5400 x 2400 mm, Bolster area: 5400 x 2400 mm, Working height: 710 mm, Side opening: 3800 mm, Main motor (A.C): AC 315 x 4 kw x p Slide adjust motor : 22 x 6 kw x p Die cushion: Capacity: 120 ton, Stroke: 200 mm, Area of Pad: 480 x 1780 mm x mm, Air pressure: 5.0 kgf/cm2 Moving bolster: Type: Front rear, Speed: 12 F R M/min Motor : 5.5 x 1/59 kw x p

8

ID	MA33182
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Force total : 3.250 Ton. slide 1 : force 1.250 Ton. slide 2 : force 1.000 Ton. slide 3 : force 1.000 Ton. Stoke : slide 1 : 1.100 mm slide 2 : 1.000 mm slide 3 : 1.000 mm Slides Regulation: 175 mm Daylight : 1.550 mm Stroke /min: 5 � 18 ( continuous regulation ) Slide dimension : slide 1 : 2.000 mm x 2.750 mm slide 2 : 3.600 mm x 2.750 mm slide 3 : 3.600 mm x 2.750 mm complete of lateral moving bolster complete of cushions : Hydraulic & Pneumatic

9

ID	MA32595
Make	AIDA,Japan
Model	UL4000
YOM	2007
Condition	Good Condition
Photo	See Photo
Capacity: 400 ton Stroke: 350 mm Die Height: 900 mm S.P.M (R.P.M): 20-40 spm Number of stations: 7 stage Bolster Area: 3000 mm X 1250 mm- X 200 mm Slide Area: 3000 mm X 1000 mm Slide Adjustment: 60 mm Main Motor: 75 (inverter control) kw Machine Size --4500 mm Machine Weight: 122 ton Micro inching 10 mm Sub bolster: 3000 x 1250 x 170 mm Stage pitch: 400 mm

10

ID	MA32037
Make	Komatsu
Model
YOM
Condition	Good Condition
Photo	See Photo
Capacity: 600 ton Stroke: 500 mm SPM (Second Process): 15 - 30 SPM (Third Process): 15 -25 Shut Height: 1100 mm Bolster: 3600 x 1600 mm Stages: 6 Deep Drawing: 180 mm Blank Max Size: 800 x 500 mm Blank Thickness: 0.8 - 3.2 mm Feed Stroke:600 mm

11

ID	MA31545
Make	Automa Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Machine Type:Transfer Press Make: Automa Capacity:250 ton Bolster: 2500 x 900 mm Slide:2500 x 600 mm Stroke:400 mm SPM: 15 - 30 Adjust:100 mm Die Height:700 mm Main Motor:37 Kw, Die cushion capacity Stage 1 : 7 ton, Stage 2 - 10 outer: 3 ton, Stage 2-10 inner: 120 kgs, Die cushion stroke Stage 1: 250 mm, Stage 2-10 inner: 250 mm, Stage 2-10 stroke: 290 mm Pad Stage 1 : 120 mm dia, Stage 2-10 outer: 120 mm dia Stage 2-10 inner: 150 x 180 mm dia Machine type: Transfer equipment Feed stroke: 250 mm, Lift stroke: 20 mm, Clamp stroke: 100 mm, Feed bar width: 300 mm, Feed stroke: 400 mm, Machine type: Blanking equipment Blanking : 200 mm x 1.2 t, Stroke: 400 mm, Machine type: uncoiler Feed stroke: 0-250 mm, Coil width: 250 mm, Coil thickness: 2 mm, Coil SPM: 15-30

12

ID	MA31424
Make	Fukui
Model	MFE1200TH
YOM	1981
Condition	Good Condition
Photo	See Photo
Item: Transfer Press Capacity: 1,200ton Maker: FUKUI Model: MFE1200TH Year: 1981 Stroke: 550mm Number of stroke: 11-22 rpm Adjust of Slide: 100mm Die-height: 1,100mm Slide size: 4,500x1,900mm Bolster size: 4,700x2,000mm Air pressure: 5kg/㎠ Main Motor: 150kw Adjust Motor: 7.5kw Die-Cushion: No.1 60ton Stroke: 160mm Bed size: 600x1,400mm No.2-5 30ton Stroke : 160mm Bed size: 600x1,400mm Transfer Feeder Specification Feed Stroke: 750mm Clamping Stroke: 210mm Lifting Stoke: 12 0mm Inside Distance of Feed Bar: 900, 1150, 1400, 1,650mm Height of Blank Feed Line: From Bolster-645mm Height of Panel Carry Out: 475mm Height of Feed Bar Face(Bar Down: 625mm Max Blank size (LRxFR): 650x1600mm Min Blank Size (LRxFR): 150x460mm Coil direction: L-R

top