V. K. Engineering - Buying & Selling of Machines made easy

Category : Turning Machines

Sub-Category : Lathe CNC

Total Machines Found : 895

Select

| Machine Details

ID	MI11494
Make	Takisawa,Japan
Model
YOM	2004
Condition	Good Condition
Photo	See Photo
Fanuc 0i 16m Travel size 400*1000 with tailstock

ID	MI11488
Make	Ledwell
Model	LTC30P
YOM
Condition	Good Condition
Photo	See Photo
CHUCK : 400 MM LENGTH : 1000 MM BETWEEN : 1200 MM SWING DIA TURNING : 600 SPINDLE TYPE : A 2 11 SPINDLE BORE : 110 MM FANUC - O -TF : CONTROLLER MACHINE IN ALPHA DRIVES MACHINE WITH STEBILIZER WITH CHIPCONVEYER TURRET SATATION : 08 WITH TAILSTOCK MOTER POWER : 22 KW ALL AXIS BOX WITH HAVEY DUTY

ID	MI11465
Make	Ace
Model	Super Jobber 500
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck 200 Length 500 Swing 350mm Fanuc oi TF With Stabilizer

ID	MA39531
Make	China
Model	CK6163
YOM	2022
Condition	Good Condition
Photo	See Photo
milling dia max. 630mm, milling length 3000mm swing dia 630

ID	MI11400
Make	Mori Seiki
Model
YOM
Condition	Good Condition
Photo	See Photo
* FANUC MF-D6 Control ( Fanuc 16T ) * ⁠Chuck Size : ( 610 mm ) 24" 3-Jaw * ⁠Max Turning Dia : 500 mm * Swing Over Bed : 670 mm * ⁠Swing Over Cross Slide : 470 mm * ⁠Max Turning Length : 1618 mm * ⁠Centers : 1692 mm * ⁠12-Position Upper Turret * ⁠10-Position Lower Turret * ⁠Tailstock * ⁠Mist Collector

ID	MA39512
Make	Doosan
Model	Puma 800L
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck size - 800 mm 12-station super large turret maximum rotation diameter 1140mm turning diameter 900 mm effective processing length 3200 Control - FANUC 32i

ID	MA39510
Make	Goodway
Model	GS-6600L
YOM
Condition	Good Condition
Photo	See Photo
Machining capacity: Maximum turning diameter of 1100mm maximum turning diameter 880mm maximum turning length 3300mm bar capacity �180mm 2. Spindle parameters: Spindle through-hole diameter �205mm spindle bearing diameter �260mm spindle nose A2-15 spindle motor α30/6,000i motor power (continuous/30 min) 30/37 kW (40/50 HP) spindle speed low 550 rpm high 1,100 rpm 3. Axis travel and feed: X-axis maximum travel 500mm, Z-axis maximum travel 3300mm, X-axis rapid feed 20m/min Z-axis rapid feed 12m/min guideway type is hardened guideway feed rate 1-4,800 mm/min.4. Turret parameters: Turret capacity 12 square tool □32mm, round tool �60mm turret motor power (continuous/30 min) 7.5/9 kW (10/12 HP) turret speed 10-3,000 rpm.5. Tailstock parameters: Quill taper MT#4 (fixed center)/MT#5 (optional movable center) quill diameter/travel �110mm/150mm, tailstock body travel 3200mm Other parameters: Standard controller Oi-TD (optional 31i) voltage/power requirements AC 200/220 +10% to -15% 3 phase / 64 KVA, air pressure 6 kgf/cm� (80 PSI), machine weight approximately 18,000 kg.

ID	MI11391
Make	Mori Seiki
Model	SL-6B
YOM
Condition	Good Condition
Photo	See Photo
* Fanuc CNC Control * ⁠Chucks: 15 inches ( 380 mm ) * ⁠Max turning dia : 600 mm * ⁠Center distance : 900 mm * Swing over bed : 700 mm * ⁠Swing over carriage : 580 mm * ⁠Spindle speed : 0-1010 rpm * ⁠Spindle bore : 100 mm * ⁠Bar capacity : 90 mm * ⁠12 station turret

ID	MI11379
Make	Okuma Howa
Model
YOM
Condition	Good Condition
Photo	See Photo
Swing Over Bed: 21.25" Distance Between Centers: 29.52" Maximum Turning Diameter: 13.77" Maximum Turning Length: 28.74" Spindle Speeds: 30-3200 RPM Spindle Nose: A2-8 Spindle Hole: 3.03" Spindle Drive Motor: 30 HP / 25 HP X-Axis Travel: 8.85" Z-Axis Travel: 29.52" Tool Capacity: 12 TRT Rapid Traverse: 472.44 IPM Equipped with: Fanuc 15-T Control 12" 3-Jaw Kitagawa Hydraulic Chuck Turbo Chip Conveyor Tailstock

ID	MI11370
Make	Jyoti,India
Model	DX200
YOM
Condition	Good Condition
Photo	See Photo
Control Siemens 828 D Modal 2013 Without stebilayzar Without centre With conver

ID	MI11332
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
CHUCK SIZE ( INCHES ) 8" MAX MACHINING CAPACITY � 280 MM / 11.0" MAX BAR WORK CAPACITY 52 MM / 2.0" MAX MACHINING LENGTH 405 MM / 15.9" TURRET NO. OF TOOLS 12 MAX CHUCK SPINDLE SPEED 5000 RPM NUMBER OF AXIS X, Z, W & C X - AXIS TRAVEL � 190 MM / 7.48" Z - AXIS TRAVEL 545 MM / 21.46" TAILSTOCK SLEEVE TAPER TYPE MT 4 MAX MILLING SPINDLE SPEED 4500 RPM MAX MACHINING CAPACITY MILLING � 235 MM / 9.25" MAX MILLING TOOL LENGTH FOR OD MILLING OPERATION 60MM MILLING COLLECT TYPE ER32

ID	MI11329
Make	Dainichi
Model	75BX400
YOM
Condition	Good Condition
Photo	See Photo
Fanuc Series 20-T Control, 750 mm Swing, 4000mm Between Centers, 5000mm Bed Length, 500mm 3-Jaw Chuck, 250 mm Hole Thru, 4-Way Tool Post, 2 nos Steady Rests

ID	MI11314
Make	GILDEMEISTER
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
Model: MF Sprint 42 Length: 3500.0 mm Width: 1645.0 mm Height: 1765.0 mm Weight: 5000.0 kg Turning Length: 280.0 mm Turning Diameter: 100.0 mm Length Between Centers: 580.0 mm X-axis Travel: 155.0 mm Z-axis Travel: 280.0 mm Spindle Bore: 65.0 mm Number of Turrets: 2 Number of Tools on Turret: 8 Number of Rotating Tools: 4 Turning Speed: 5000 RPM Spindle Motor Power: 28.0 kW

ID	MA39383
Make	MAZAK
Model	M5-N
YOM	2007
Condition	Good Condition
Photo	See Photo
With F/R Chuck Front side 20" air Chuck Real side 4 jaw Chuck Spindle thru hole 6.5 inch Working length 3200 With converyer tail stock

ID	MA39375
Make	Victoria,London
Model	Vturn II-26Y
YOM	2010
Condition	Good Condition
Photo	See Photo
Swing over bed：520mm Swing over cross-slide：350mm Distance center to center：1130mm chuck size：10� Bar capacity：52mm Spindle bearing diameter：100mm Spindle nose：A2-8 Controller：FANUC 18i-TB Turret：12 stations X travel：195+50mm Z travel：1090mm Y axis：�55mm

ID	MA39374
Make	Goodway
Model	GS-280Y
YOM	2007
Condition	Good Condition
Photo	See Photo
Max. Swing diameter：670mm Swing over saddle：500mm Max. turning diameter：340mm Standard turning diameter：250mm Max working length：534mm chuck size：10� Bar capacity：75mm Spindle bearing diameter：130mm Spindle nose：A2-8 Controller：FANUC 18i-TB Turret：12 stations Y axis：110mm

ID	MI11303
Make	Ace
Model
YOM	2005
Condition	Good Condition
Photo	See Photo
Ace 200 Control= fanuc tb

ID	MI11299
Make	Johnford
Model	SL500/1000
YOM	2004/05
Condition	Good Condition
Photo	See Photo
FANUC Oi-TB CNC CONTROL CHUCK SIZE: 10" ( 250 mm ) TURNING DIAMETER: 450 mm ⁠SWING OVER BED: 580 mm ⁠MACHINING LENGTH: 787 mm ⁠BAR CAPACITY: 76 mm ⁠SPINDLE POWER: 25 HP ⁠MAX RPM: 3,500 ⁠SPINDLE NOSE & BORE: A2-8 / 3.4" ⁠TURRET TOOL POSITIONS: 12 ⁠X-AXIS TRAVEL & RAPID TRAVERSE: 9.80" / 590 IPM ⁠Z-AXIS TRAVEL & FEEDRATE: 25.6" / 393 IPM ⁠PROGRAMMABLE TAILSTOCK & QUILL: YES ⁠COOLANT CAPACITY: 30 GALLONS

ID	MI11290
Make	Global
Model
YOM	2018
Condition	Good Condition
Photo	See Photo
CHUCK 200 LENGTH 500 A 26 SPINDLE 52 MM BORE FANUC OI TF 2018 MODEL END ONLY MACHINE WITHOUT STEBILIZER

ID	MA39223
Make	Doosan
Model	PUMA400LA
YOM	2007
Condition	Good Condition
Photo	See Photo
CONTROLE Cnc FANUC 21i-TB LENGTH : Center distance mm.2000

ID	MI11227
Make	HMT
Model	SBCNC-35/2000
YOM
Condition	Good Condition
Photo	See Photo
SWING OVER CARRIAGE WINGS : 540 mm MAX. TURNING DIA : 350mm ( over cross slide) DESTANCE BETWEEN CENTRE : 1830mm MAX TURNING DIA OF CHUCKING JOB : 540mm USABLE LONGITUDENAL STROKE: 1600mm CROSE SLIDE STROKE : 380mm SPIDEL DRIVE MOTOR : 38kw

ID	MA39122
Make	PTF
Model	CAK6156A
YOM
Condition	Brand New
Photo	See Photo
Max. diameter swing over bed - 560 mm Max. cutting diameter - 560 mm Max. weight of workpiece - 500 kg Width of guideways - 430 mm Model of guideways - Double guideways Width of X slide chair - 260 mm Swing over carriage - 305 mm Spindle nose - A2-8 Spindle hole - 86 mm Spindle speed - 15-135 rpm 65-270 rpm 260-800 rpm r/min Steps of spindle speed - Manual 3 steps Manual steady rest - 40-300 mm (optional) Spindle motor - 11 kw X axis motor - 15 N.m Z axis motor - 19 N.m Manual 3 jaw chuck - 315 mm Turret - 4 T Rapid travel of X axis - 4 m/min Rapid travel of Z axis - 4 m/min Model of X axis ball screw - 3206 mm Model of Z axis ball screw - 5016 mm Max. travel of X axis - 310 mm Max. travel of Z axis - 500 mm Tailstock - Manual Diameter of quill - 75 mm Model of center - Live center Max. travel of quill - 240 mm Taper hole of tailstock hole - 5-# Weight of machine - 3 Ton Electrical capacity - 50 kva Dimensions - 2500x1700x1500 (LxWxH) Standard configuration: 1. FUANC 0I TF (5) CNC control system 2. 11 KW Variable frequency spindle motor 3. Vertical 4-position auto-turret 4. Manual 3-jaw chuck Ф315mm 5. Half splash guards 6. Auto-lubrication system 7. Standard work light 8. Without tailstock 9. Coolant system 10. Standard machine color 11. English technical documents 12. Random tools and attachments 13. Iron pallet for export Delivery time: 2 months after deposit Payment: 30% in advance, 70% before shipment

ID	MI11207
Make	UTITA
Model	T 450
YOM
Condition	Good Condition
Photo	See Photo
Control Fanuc Chuck Size : 450mm Z Stroke : 3000mm Swing Overbed : 700mm Programmable Tailstock Self Centering Steady Chip Conveyor Coolent Tank 10 Station VDI Tool Turret Panel AC No of Tool Holder,Tools,Chuck Jaws Available Manuals Available ECS System India Service Support Available

ID	MA39109
Make	Hardinge
Model
YOM
Condition	Good Condition
Photo	See Photo
SUPPLY VOLTAGE : 400 HERTZ : 60/60 MACHINE FLA : 87 SPINDEL DRIVE : 44a CONTROLE VOLTS : 115/24 PHASE : 3

ID	MA39042
Make	Mori Seiki
Model	NL2000Y/500
YOM	2012
Condition	Good Condition
Photo	See Photo
Controller : MAPPS III Max Swing �923mm Max over cross slide �755mm Max Turn �356mm Bar Capacity �65mm Travel X260 Z590 Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor

ID	MA39024
Make	PTF
Model	CKP6152
YOM
Condition	Brand New
Photo	See Photo
Chuck - 200 mm Swing over bed - 420 mm Swing over carriage - 210 mm Max. length of workpiece - 500 mm Max. Turning length - 350 mm Pan of guideway - 400 mm Spindle nose - A2-6 Spindle bore - 58 mm Taper hole of spindle - 63 Center height from bed - 225 mm Max. Travel X - 280 mm CNC control - Fanuc 0i-TF Main Power - 7.5 kw Lathe mass - 2600 kg Machine length - 2630 mm Machine width/height - 1500 mm Standard configuration: 1. FUANC 0I TF (5) CNC control system 2. FANUC feeding servo motors 3. 7.5KW Variable frequency spindle motor 4. Vertical 4-position auto-turret 5. Manual 3-jaw chuck Ф250mm 6. Half splash guards 7. Auto-lubrication system 8. Standard woeklight 9. Coolant system 10. Standard machine color 11. English technical documents 12. Random tools and attachments 13. Packing box for export Delivery time: 2 months after the deposit Payment: 30% in advance, 70% before the shipment

ID	MA39019
Make	PTF
Model	CK6163
YOM
Condition	Brand New
Photo	See Photo
Chuck - 325 mm Swing over bed - 630 mm Swing over carriage - 340 mm Max. length of workpiece - 750 mm Max. Turning length - 600 mm Pan of guideway - 550 mm Spindle nose - C11 Spindle bore - 100 mm Taper hole of spindle - 120 Center height from bed - 315 mm Max. Travel X - 390 mm CNC control - Fanuc 0i-TF Main Power - 11 kw Lathe mass - 3.5 t Machine length - 3125 mm Machine width/height - 2042 mm Standard configuration: 1. FUANC 0I TF (5) CNC control system 2. FANUC feeding servo motors 3. 11KW Variable frequency spindle motor 4. Vertical 4-position auto-turret 5. Manual 3-jaw chuck Ф400mm 6. Half splash guards 7. Auto-lubrication system 8. Standard woeklight 9. Coolant system 10. Standard machine color 11. English technical documents 12. Random tools and attachments 13. Packing box for export Delivery time: 2 months after the deposit Payment: 30% in advance, 70% before the shipment

ID	MI11174
Make	Ace
Model
YOM
Condition	Good Condition
Photo	See Photo
1. Lathe CNC Make - Ace Model - Jobber Junior YOM - 2018 Chuck - 200 mm Length - 300 mm 2. Lathe CNC Make - Ace Model - Jobber LM YOM - 2016 Chuck - 200 mm Length - 400 mm 3. Lathe CNC Make - Ace Model - Super Jobber YOM - 2014 Chuck - 200 mm Length - 450 mm

ID	MA38994
Make	LITZ HITECH
Model	LT-350
YOM	2014
Condition	Good Condition
Photo	See Photo
X/Z 140/350mm Spindle rpm：6000rpm Spindle nose：A2-5 Thru-hole Dia.：56mm Swing over bed：350mm Swing over size：280mm Center distance：455 Turret：12 station Chuck：6� FANUC controller Tailstock

ID	MA38955
Make	Okuma
Model	LB-45 II
YOM	1998
Condition	Good Condition
Photo	See Photo
Specifications: Swing over Bedways 33.8 Swing over Saddle 21.7" Maximum turning length 118.7" Spindle Nose A2-11 Spindle Bore 5.12" RPM Range 24- 2400 Chuck: 24" 4 Jaw Spindle Motor 50 hp. Equipped With Control Okuma OSP-7000 CNC, 15" 3-Jaw manual Chuck Chip Conveyor, Flood Coolant,

ID	MA38928
Make	Gurutzpe
Model	Auto M-S CNC
YOM	2002
Condition	Good Condition
Photo	See Photo
Control: FAGOR Swing over Bed: 850mm Distance Between Centres: 6000mm Spindle Bore: 260mm (10.5�) Front and Rear chucks (both 25� dia. 4 � jaw) Fixed Steady Swarf Conveyor Selection of toolholders

ID	MA38924
Make	Protec
Model	9NA
YOM	2016
Condition	Good Condition
Photo	See Photo
Size -950�6000 Fanuc Oi-TF Full cover, chip conveyor Tool stand, tailstock model 1120 Equipped

ID	MA38923
Make	Hwacheon
Model	MEGA -100 -5000-3
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck - 18" Bar Capacity -155 mm Spindle Speed -750 Rpm (Auto 3 Step ) Control Siemens 828 D Swing Over Bed - -1080 mm (cut 1000mm ) Swing Over Carriage - -720 mm (cut 700mm ) Distance betwwn Center -5000 mm X - Travels - 520 mm Z - Travls - 5000 mm Tailstock taper -No.6 Movement Builin Type -260 mm Bed width 1 bed 2 ways - 700 mm Dimension 8200 x 2350 x2150 (H) MM Weight -14000 Kg

ID	MA38892
Make	Ecoca
Model	SL-8
YOM	2014
Condition	Good Condition
Photo	See Photo
Swing Over Bead：420mm Swing Over Cross Slide：350mm Max. Turning Dia.：320mm Max. Turning Length：480mm chuck size：8� Controller：FANUC 0i Mate-TD Turret：10 stations Tailstock

ID	MI11094
Make	Ace
Model	SJE 10XL
YOM	2024
Condition	Good Condition
Photo	See Photo
Chuck Size :- 250 mm Maximum Turning Length :- 500mm Controller :- Fanuc OiTF

ID	MA38813
Make	Traub
Model	TNA 480L
YOM
Condition	Good Condition
Photo	See Photo
Swing Dia of Longitudinal slide -660 mm Swing Dia of cross slide -445 mm Turning Length -2000mm Chuck Diameter -250/315 mm Spindle Passage - 80/100 mm Work Spindle -with seprate servo motor motor C Axis Speed -60 U/min Spindle Head -A8 DIN 55 026 Spindle Speed - 16-3150 U/min 16-2500 U/min Spindle Koif -A11 DIN 55 026 Spindle Speed - 16-3150 U/min 16-2500 U/min No. of Tools -14 powered Tools -14 Cylendical Shaft -- Din 69 880 Part 1 -- 40 x63 mm Slide Path Z axis -2120 mm X -Axis -265 mm Feed force Z Axis -12500 N Feed Force X Axis -8000N Space Requirement -7,7 x 4,5 m Height -2,49 m weight -that .9500 kg

ID	MI11072
Make	Nakamura Tome,Japan
Model	TW20
YOM
Condition	Good Condition
Photo	See Photo \| See Video
urning length 150 mm Turning � 270 mm � above the bed 200 mm Length between centers 780 mm Type of CNC FANUC 0TT X-axis 195 mm Z-axis 265 mm Spindle taper Spindle bore 65 mm Number of turrets 2 Number of tools on turret 12 Number of rotating tools 1 Turning speed 5000 rpm Spindle motor power 14.9 kW Tailstock no Bar feeder no ------------------- Length x width x height 4500.0 � 2500.0 � 2500.0 Weight 6488.2 kg New Display New Membrane Key Board Machine re-painted,

ID	MI10999
Make	Dainichi
Model	DLX120�1400
YOM	1998
Condition	Good Condition
Photo	See Photo
Fanuc-20T Swing over bed:1,200mm Swing over carriage:800mm Center:14,000mm Spindle bore:125mm 3xSteady rest

ID	MA38675
Make	SKODA
Model	SR2500
YOM
Condition	Good Condition
Photo	See Photo
Swing dia 2500 x 8000mm length. Taiwan cnc controller.

ID	MI10973
Make	Tsugami
Model	Mi08JL5-II
YOM
Condition	Good Condition
Photo	See Photo
Max. machinable dia. Φ 280mm/Φ65 mm(Barstock) Main spindle speed 200~4,000 min-1 No. of turret stations 8 station turret Rapid traverse rate X : 24m/min Z :27m/min Main Spindle motor 9/11 kW Width x Depth x Height 2,170 x 1,778 x 1,600mm Weight 3,430 Kg.

ID	MI10941
Make	Hwacheon
Model	Hi Tech 200B
YOM	2006
Condition	Good Condition
Photo	See Photo
Control Fanuc Oi-TC Spindle rpm 3,500 rpm Chuck size 250 mm Swing over bed 500 mm Maximum turning diameter 350 mm Maximum turning length 400 mm Spindle nose A2-8 Turret stations 12

ID	MA38623
Make	MAZAK
Model	Integrex 30
YOM	1997
Condition	Good Condition
Photo	See Photo
Technical details Bar passage 64 mm Max rotation diameter 510 mm Turning Diameter 400 mm Turning Length 1539 mm Spindle power 22-26 kW Spindle Speed Min. 35 RPM Spindle Speed Max. 3500 RPM Rapid Travel Speed X-Axis 12 m / min Rapid Travel Speed Y-Axis 10 m / min Rapid Travel Speed Z-Axis 18 m / min Motor power milling spindle 7,5 kW Max. speed milling head 15-6000 RPM X-axis travel 450 mm Y-axis travel +/- 90 mm Z-axis travel 1539 mm Number of tools in the chain magazine 40 (15 + 25) POS Machine length 6365 mm Machine width 3180 mm Machine Height 2800 mm Weight Of The Machine Ca. 7 t

ID	MA38606
Make	Seiger
Model	SLZ 400E x 1000
YOM	2000
Condition	Good Condition
Photo	See Photo
Spindle bore 55 mm with hollow spindle stop Spindle bearing was completely renewed in 2023 Fixed steady rest 12 - 150 mm Follow steady rest 12 - 80 mm Quick-change holder size. B see pictures Coolant system Glass scale X-axis Various chuck sizes 200 mm -300 mm Adjustable machine feet

ID	MI10930
Make	puma
Model	PUMA 350A
YOM
Condition	Good Condition
Photo	See Photo
SWING OVER BED:700mm swing over saddle : 480mm RECOME MACHINE DIA: 305mm MAXIMUM MACHINE DIA : 550mm MAX WORK LENGTH: 1050mm DRAW TUBE DIA : 91mm

ID	MI10929
Make	Victor
Model	VTURN-26
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Swing 600mm Job dia 450mm Chuck dia 250mm Between centre 1100 controle : fanuc

ID	MA38593
Make	Goodway
Model	GS-280Y
YOM	2007
Condition	Good Condition
Photo	See Photo
Max Swing Diameter :670 mm Swing Over Saddle:500 mm Max Turning Diameter:340 mm Standard Turning Diameter:250 mm Max Working Length:534 mm Chuck Size:10" Bar Capacity:75 mm Spindle Bearing Diameter:130 mm Spindle Nose :A2-8 Controller:Fanuc18i-TB Turret:12 Stations Y Axis:110 mm

ID	MA38592
Make	Victor-Taichung
Model	Vturn II-26Y
YOM	2010
Condition	Good Condition
Photo	See Photo
Swing Over Bed :780 mm Max Turn Diameter:330 mm Standard Turning Diameter :285 mm Max Working Length :475 mm Chuck Size:10" Bar Capacity:52 mm Spindle Bearing Diameter:100 mm Spindle Nose:A2-8 Controller :Fanuc 18iTB Turret :12 Stations Y axis:+55 mm

ID	MA38591
Make	Victor-Taichung
Model	VTURN36
YOM	2000
Condition	Good Condition
Photo	See Photo
Swing Over Bed :650 mm Max Turn Diameter :550 mm Standard Turning Diameter :445 mm Max Working Length :890 mm Chuck Size:12" Bar Capacity:91 mm Spindle Bearing Diameter:130 mm Spindle bearing Diameter:130 mm Spindle Nose:A2-8 Controller :Fanuc 0i-TC Turret :10 Stations No Tail Stock

ID	MI10918
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
350 mm Chuck dia 450 mm turning dia A28 Spindle 1500 mm between length Fanuc oitd Control With Chip Convoyer With gearbox Spindle

ID	MI10912
Make	Duplo Standard
Model
YOM
Condition	Good Condition
Photo	See Photo
Centre height: 700 mm Distance between centers: 2000 mm Spindle diameter: 400 mm Spindle bore: 100 mm

ID	MI10910
Make	Leadwell,Taiwan
Model	LTC 30 BPL
YOM
Condition	Good Condition
Photo	See Photo
Swing: 650 mm Swing over cross slide: 520 mm Maximum turning diameter: 480 mm Maximum turning length: 1500 mm

ID	MI10861
Make	Macpower
Model	Mono 200
YOM	2019
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size :- 250 mm Maximum Turning Diameter :- 375mm Maximum Turning Length :- 450 to 500mm Spindle Bore :- 52mm Controller :- Fanuc OiTF

ID	MI10853
Make	Victor
Model	Vturn 26
YOM
Condition	Good Condition
Photo	See Photo
Chuck -250 Swing- 400 Between centre - 1100 Fanuc 18T with 3 live tools.

ID	MA38477
Make	SUN FIRM
Model	CET2880
YOM	2008
Condition	Good Condition
Photo	See Photo
Swing Over Bed :730mm Swing Over Saddle:450mm Distance Between Centre: 200mm Spindle Bore: 105mm Spindle Nose: A2-8 Controller Fanuc Travel : XZ/ 400/200mm Turret:8 station

ID	MI10832
Make	Wintec,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
CHUCK SIZE- 8inch TURNING LENGTH-650 TURNING DIA -280 SWING -450 SPINDLE BOR -50 CONTROL- OT FANUC

ID	MI10829
Make	Jyoti
Model	DX 100
YOM	2021
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size 165 Siemens controller 828D Machine running condition

ID	MI10789
Make
Model
YOM
Condition
Photo	See Photo
Chuck size:- 300mm, Length:- 400mm Controller:- Fanuc Oi-TA Product Code - TPHIR000006594 Brand - LMW

ID	MI10770
Make	Pittler
Model	TC1
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Swing over Dia - 550 mm Between Center - 1030 mm Bedtype - Inclind Control - Mitsubishi E70 With 12 tool holder, Shank dia 400 mm

ID	MA38365
Make	Muratec
Model	MW120
YOM	2011
Condition	Good Condition
Photo	See Photo
Distance between spindles 340 mm Max Swing 295 mm chuck size 205 mm Max diameter w/ Loader 120 mm Max diameter without Loader 230 mm Number of turret stations 8 Stroke - X-axis radius 130 mm - Z-axis 145 mm Rapid Traverse rate X-axis 24 m/min Z-axis 24 m/min Max spindle speed 4500 rpm Standard tools - Shank size OD tools 20 mm - Max shank diam boring bar 40 mm Machine weight 4400 kg Machine foot print Length x width 1900 mm X 1760 mm Machine is equipped with the following: Muratec / Fanuc pendant controller Single Gantry style machine magnetic chip conveyor stacker loader option Books and Manuals

ID	MI10687
Make	LMW
Model	LL20TL5
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck-250 turning length -500 Between center -650 With tailstock Without stabilizer

ID	MI10685
Make	CYNIC
Model	370 L
YOM	2020
Condition	Good Condition
Photo	See Photo
A25 spindle 4000rpm spindle saravo 165 chuck 3 jo and 4 jo Stabilizer X 740mm traveling Z 200mm

ID	MI10684
Make
Model
YOM	2002/03
Condition	Good Condition
Photo	See Photo
Liner with 6� chuk Fanuc 21it CNC Cantrol

ID	MI10683
Make	Stama
Model
YOM
Condition	Good Condition
Photo	See Photo
Liniar Tool 200 Chuck 400 Swing Siemens 808D

ID	MI10669
Make	Sunfirm
Model	CKE61200H/4000
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
SWING OVER DIA : 2000mm Swing over Slide ; 1600mm COMPLETE WITH CHIP CONVEYOR, MANUALS WITH TRIAL Job loading capacity: 30 TONS

ID	MI10667
Make	Batliboi
Model	SP-20TCZX
YOM	2021
Condition	Good Condition
Photo	See Photo
chuck size 250 Turning length 500 Hydraulic turret LM guide Fanuc TF plus

ID	MI10662
Make	Cincinnati
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
CNC :- FANUC OiTF Plus CNC Controller Servo Spindle 15 Kw Chuck Dia = 250 mm Swing = 350 mm , ABC = 1200 mm Spindle Speed 2500 RPM Spindle Bore A 2- 5 Diplomatic Turret 12 Station (Heavy Duty) Automatic lubrication , Flood Coolant Chip convey our (scrapper type Repeatability / Accuracy 0.010 mm

ID	MI10659
Make	Mori Seiki
Model	SL3
YOM
Condition	Good Condition
Photo	See Photo
CNC :- FANUC OiTF Plus CNC Controller Spindle 15 Hp Chuck Dia = 250 mm Swing = 320 mm, ABC = 600 mm Spindle Speed 2200 RPM Spindle Bore A 2- 5 Turret 8 Station (Motorized ) Automatic lubrication Coolant system

ID	MI10658
Make	Ace
Model	LT20
YOM	2016
Condition	Good Condition
Photo	See Photo
CNC :- FANUC OiTF CNC Controller Servo Spindle 15 Kw Chuck Dia = 250 mm Swing = 350 mm ABC = 600 mm Spindle Speed 2500 RPM Spindle Bore A 2- 5 Pragati 8 station Turret Automatic lubrication Flood Coolant Chip tray with coolant pump Repeatability / Accuracy 0.010 mm

ID	MI10656
Make	MAZAK
Model	Integrex 30
YOM	1997
Condition	Good Condition
Photo	See Photo
Chuck - 300 mm Length - 1000 mm

ID	MI10654
Make	Takisawa
Model	Nex110
YOM	2004
Condition	Good Condition
Photo	See Photo
Chuck 300 Length 700 Fanuc 21iT

ID	MI10653
Make	GILDEMEISTER
Model	CTX 500
YOM	2008
Condition	Good Condition
Photo	See Photo
Max turning diameter 500 mm Turning lenght 1250 mm Spindle bore 102 mm Spindle diameter 315 mm Other Info THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES.

ID	MI10615
Make	Femco,Taiwan
Model	WNCL-35/110B
YOM
Condition	Good Condition
Photo	See Photo
CONTROL : FANUC 18T CNC CONTROL ⁠ 15" 3-JAW CHUCK ⁠Swing : 600 mm ⁠Max Turning Dia : 500 mm ⁠Max turning length : 1000 mm ⁠Center distance : 1100 mm ⁠spindle speed : 2500 RPM ⁠12-POSITION TURRET ⁠TAILSTOCK ⁠CHIP CONVEYOR

ID	MI10614
Make	Excel,Taiwan
Model	SL 320/600
YOM
Condition	Good Condition
Photo	See Photo
Control : Fanuc OT-C Control ( Alpha Drives ) ⁠Direct Imported Machine ⁠Made in Hungry ( EU ) Chuck: 10 inches ( 250 mm ) ⁠Max Turning Dia : 320 mm ⁠Machining Length : 600 mm ⁠Tool Stations: 12 ⁠Spindle Bore : 65 mm Equipped with : Tool Setter ⁠Chip Conveyor ⁠Machine Toolings

ID	MA38244
Make	Ikegai,Japan
Model
YOM	1984
Condition	Good Condition
Photo	See Photo
chuck:1,250mm 1,500x4,000 Fanuc-0iTD

ID	MI10588
Make	Jyoti
Model	DX150
YOM	2009/2010/2011
Condition	Good Condition
Photo	See Photo
Chuck - 150 mm Control - Seimens Same model 3 machines for sale

ID	MA38200
Make	Giana
Model
YOM
Condition	Good Condition
Photo	See Photo
Turning Dia :1400*6000 mm Turning On Carriage :950 mm Bed Width :900 mm 2 Steady rest Cnc Siemens Sinumerik 810

ID	MA38176
Make	MAZAK
Model	Primos 150s
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size - 200 mm With Fanuc Controller Same Model 2 Machines For Sale

ID	MA38168
Make	Poreba
Model
YOM
Condition	Good Condition
Photo	See Photo
Swing: 2000 Machining Length: 5000 Chuck: 1600 Bed Width: 1500mm Tool Table: 8-angle turret Tailstock: 450mm System: FANUC 0T

ID	MA38148
Make	DMG Gildemeister
Model	CTX420 Linear
YOM	2004
Condition	Good Condition
Photo	See Photo
Control unit: Siemens 840D Sinumerik + chip conveyor + Knoll hydraulic unit [Knoll hydraulic unit] belt filter system + Bar loading magazine Breuning Irco [automated bar loader]: For 1,600mm material Weight approx.: 6000kg Complete documentation is available.

ID	MA38144
Make	Liouy Hsing
Model	450
YOM	2010
Condition	Good Condition
Photo	See Photo
10� chuck Turret ：8 station Chip conveyor Hydraulic tailstock

ID	MI10524
Make	Mori Seiki
Model	DL-20
YOM	1992
Condition	Good Condition
Photo	See Photo
CNC Turning Machine Chuck Size :- 200mm, Spindle RPM :- 4000, Station Turret :- 12, Controller :- Fanuc OT, Twin Spindle, Gap Between 2 Spindles :- 1.3 Mtr, With Boring Guage, Clamping, Shanks

ID	MA38128
Make	YCM
Model	NTS-2000SY2
YOM
Condition	Good Condition
Photo	See Photo
All new lathes from YCM. 2 sets available Swing Over Bed :(90 mm 3.54"Long End Mill tool) Swing Over Carriage :520 mm MAx Turning Diameter :300 mm Max Turning Length :390 mm Distance between End Face of the spindle :709 mm Height From The Ground to spindle :1118 mm Chuck Size : 8" Spindle Nose :a2-6 Spindle Front Bearing Inner Diameter :110 mm Hole Through Spindle :80 mm Hole Through Draw Tube:71 mm Spindle Speed :100-4000 rpm Max Spindle Torque :22.7 kg -m 164 19 lb-ft C axis Spindle Speed:100rpm C Axis INdex Accuracy:0.001 x/z/y axis travel:170/390/90 B/E axis travel:400/115mm Motor :22/26 kw Sub Spindle Power :7.5/11kw Turret Power :2.3kw 3.08 hp Live Tool Power :3.7 kw 4.96 hp Power Consumption (transformer):87(100) kva Machine Weight:7500 Kgs 16535lb

ID	MI10518
Make	Daewoo
Model	8-2SP
YOM
Condition	Good Condition
Photo	See Photo
Distance between spindles 310 mm 12.2 in Max, tuming dia. 300 mm 11.8 in Recommendable turning dia. 210 mm 8.0 in Max. turning length 200 mm 7.9 in Max, bar work dia. 52 mm 2.0 In Spindle Chuck size Spindle nose/bore Brg. dia. front/rear Speed range Motor power (cont. 30 min) 210 mm A2-6/62 mm 100/90 mm 30-3600 rpm AC 11/15Kw 6.0 in A2-6/2.4 in 3.5/3.5 in 30-3600 rpm AC 15/20 Hp 2-1

ID	MI10512
Make	ACE Micromatic
Model	ACE LT20
YOM
Condition	Good Condition
Photo	See Photo
Dai 300 chuck A to 8 spindle 800 between centre No tailstock no stabilizer Good condition machine

ID	MA38036
Make	Microcut
Model	BND 2680X
YOM	2008
Condition	Good Condition
Photo	See Photo
Center Height :325 mm Center Width :2150 mm Rotation Diameter Over Bed 650 mm Swing Diamter Over Cross Slide :410 mm Rotation Diameter in the recess :870 mm Speeds 0-2400 rpm Mw3kfpadit Spindle Bore :82 mm Spindle Motor 15/22 Kw Machine Weight :4.800 kg

ID	MA37998
Make	Hass
Model	SL20HE
YOM	2002
Condition	Good Condition
Photo	See Photo
WIDTH: 1880 MM DEPTH: 3213 MM HEIGHT: 1778 MM WEIGHT: 4082 KG NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4000 1/MIN NUMBER OF AXES: 5 MOVEMENT X-AXIS MOVEMENT: 215 MM X-AXIS RAPID TRAVERSE: 30 M/MIN Z-AXIS MOVEMENT: 508 MM Z-AXIS RAPID TRAVERSE: 30 M/MIN NUMBER OF TURRETS: 1 DRIVEN TOOLS: YES NUMBER OF STATIONS: 10 CHIP CONVEYOR: YES Additional equipment - HYDRAULIC TAILSTOCK - AUTOMATIC LUBRICATION SYSTEM - LASTMONITOR - CAPACITY OF THE COOLING TANK: 151 LITERS - AIR CONNECTION OF 7 BAR, 113 L/MIN - CONNECTED LOAD OF 14 KVA (INCREASED FLOW (B) = 28 KVA) - MAX. TORQUE ON THE MAIN SPINDLE OF 209 NM - SPINDLE DIAMETER OF 76 MM - BAR PASSAGE OF 52 MM - MAXIMUM TURNING DIAMETER: 262 MM // TURNING DIAMETER: 584 MM // TURNING LENGTH (MAX): 508 MM // DISTANCE BETWEEN CENTERS: 610 MM - CHUCK FROM 210 MM - COMPLETE C-AXIS - USB CONNECTION AND CHIP CONVEYOR

ID	MI10391
Make	Cincinnati
Model
YOM
Condition	Good Condition
Photo	See Photo
Fanuc oiTF Chuck present 250mm BTP80 8 Station turret ABC 1200mm Tailstock Chip conveyer Coolant

ID	MI10379
Make	DMC
Model	DL6 TMH
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck diameter 200mm Turning length 400mm live tools 2nos available With Tailstock & stabilizer

ID	MI10378
Make	Yang
Model	ML-60A
YOM
Condition	Good Condition
Photo	See Photo
CNC FANUC Series O-T Chuck : 380 mm Swing over bed: 720 mm Turning diameter: 620 mm Distance between center: 1270 mm Spindle speeds: 4 � 2000 rpm Automatic turret: 8 positions Tailstock Chip conveyor

ID	MI10376
Make	LMW
Model	LL20TL10
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck size - 250mm Between center - 1 meter Control - fanuc oitf Spindle size - A2-6

ID	MA37922
Make	Feeler
Model	FTC350MC
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck Size - 8 Inch (200 mm) With Milling Function

ID	MA37918
Make	Femco
Model	HL55s
YOM	2011
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size - 500 mm 4 Jaw Chuck Length - 2500 mm Control - Fanuc

ID	MA37915
Make	Sunfirm
Model	CST 42/160
YOM	2008
Condition	Good Condition
Photo	See Photo
Swing 42 Turning Diameter 27 Center Distance 160" Bar Capacity 10" X-Axis Travel 26" Z-Axis Travel 169" Rapid Traverse (X/Z) 393/315 ipm Spindle Nose A2-15 Spindle Speed 420 rpm Main Motor 35 hp Turret Capacity 8 Tailstock (Yes/No) yes Live Tooling no Y Axis (Yes / No) no Sub Spindle no Machine Dimensions 277" x 106" x 90" EQUIPPED WITH - Fanuc 0i-TC CNC Control - Chip Conveyor - Tailstock - V8 Turret - 4-Jaw Manual Chuck - 4-Jaw Manual Rear Chuck - 4 Speed Gearbox - 10" Spindle Bore

ID	MI10369
Make	Daewoo Puma
Model	10HC
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 250 Between center 700 Fanuc OT controller Alfa Drive Machine with stabilizer & chip conveyor Available for sell

ID	MI10366
Make	WMW
Model
YOM	1997
Condition	Good Condition
Photo	See Photo \| See Video
Control: FAGOR 80T Chuck Diameter: 320mm Maximum Turning Diameter: 400 mm Maximum Turning Length: 1500mm Between Center : 1700mm Maximum Swing : 685mm Spindle Speed: 2000RPM Spindle Bore: 90 mm Tool Station: 8 Box guide ways Coolant Tank Chip Conveyor

ID	MI10364
Make	BFW,India
Model	PL500S
YOM	2015
Condition	Good Condition
Photo	See Photo
Fanuc Series OiTF Control Chuck diameter 300mm Between Center 2000mm Turning length 1850mm With Tailstock & steady rest

ID	MI10363
Make	Proteck
Model	PL-500U
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
Control fanuc oi tc Chuck 400mm Turning length 1200mm 12 station turret Servo hydraulic turret With chip's Conver

ID	MA37906
Make	Mori Seiki
Model	NZ 1500
YOM	2007
Condition	Good Condition
Photo	See Photo
Turn table diameter . 300 mm Turning lenght . 800 mm Sloping bed . true Y axis . true Travel Y-axis (lathe) . 220 mm Counterspindle . true Spindle bore . 52 mm Driven Tools . true Number of tool positions (driven) . 32/32 Machine weight . 8100 kg The machine is in good technical condition, under power, after agreement is possible to test it.

ID	MA37899
Make	TOPTURN
Model	XCF 56 / EP8000
YOM
Condition	Good Condition
Photo	See Photo
Distance between center:- 8 000mm Center Height:-780mm Swing diameter over bed :-1 500mm Spindle bore :-230mm Spindle speed :-700rpm Spindle motor :- 26kW

100

ID	MA37897
Make	Pinacho
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
Between tip 3000mm Brand new manual chuck dia 320mm LanderCn fagor lg machine 5M700 weight 3T800

101

ID	MA37894
Make	Liouy Hsing
Model
YOM	2009
Condition	Good Condition
Photo	See Photo
Liouy Hsing (Taiwan) 6� Cnc turning KM4240 Fanuc Oi-TC

102

ID	MA37891
Make	First Chant
Model	KM4240
YOM	2010
Condition	Good Condition
Photo	See Photo \| See Video
Chuck:8� Fanuc Oi-TD

103

ID	MA37863
Make	MAZAK
Model	M-5
YOM
Condition	Good Condition
Photo	See Photo
24� x 120� 7.1� hole thru the spindle. New 2000. Mazatrol 640T Fusion CNC Controls Maximum Swing�� 24″ Maximum Swing Over Cross Slide��.13″ Maximum Cutting Diameter��. 22.8″ Center Distance��. 122″ Spindle Nose��. A2-15″ Spindle Bore��. 7.1″ Spindle Speed�� 1000 RPM Number of Speed Ranges�� 3 Spindle Horsepower (Cont/30 Min)��. 25/30 HP (AC) Type of Turret: Front�� Vertical Disk Rear��. Hexagon Number of Tools: Front�� 8 Rear��. 6 X-Axis�� 21.25″ Z-Axis:��. 121″ Tailstock Spindle Center��. M.T. #5 Tailstock Spindle Diameter��. 3.9″ Tailstock Spindle Travel��. 5.12″ Floor Space: (W x L)��. 119″ x 221″ Machine Height��. 83″ Total Power Required (Machine Only)��. 43 KVA Machine Weight:��. 14,300 lbs. EQUIPPED WITH: Mazatrol 640T Fusion 10.4″ Color LCD 21″ 4-Jaw Manual, Front and Rear

104

ID	MI10324
Make	Pinacho
Model
YOM	2023
Condition	Good Condition
Photo	See Photo
CHUCK -310 LENGTH -3000 SPINDLE BORE -80MM CONTROL FANUC OI TF PLUS WITHOUT STABILIZER

105

ID	MA37835
Make	Samsung
Model	SL 2000 BSY
YOM	2019
Condition	Good Condition
Photo	See Photo
max. turning diameter 395 mm turning length 490 mm control Fanuc 0i-TF Manual Guide swing dia. 650 mm standard turning diameter 275 bar material dia. 68 mm spindle bore diameter 76 mm travel -x axis 235 mm travel -y axis 100 (�52,5) mm travel -z axis 580 mm Spindle 1 RPM 4500 1/min Spindle 1 Power 18,5 kW Spindle 1 Torque 209,5 Nm Spindle 2 RPM 6000 1/min Spindle 2 power 7,5 kW Spindle 2 torque 51,9 Nm turret stations / rotary tool stations 12/12 BMT 55 Power rotary tools 5,5 kW RPM of rotary tools 5000 1/min torque rotary tools 35 Rotary tool holders 4 Rapid feeds x/y/z 24/10/30 m/min Rapid travel B-axis (parts transfer subspindle) 24 m/min dimensions of the machine ca. 4125 x 1752 x 2085 mm total power requirement 50 kW weight of the machine ca. 4,2 t Chip conveyor high pressure coolant 50 bar Knoll KF110/700 Partscounter total counter bar feeder interface Parts catcher double foot switch Airblow system Spindle 1 Chuck 200 mm Spindle 2 Chuck 150 mm Coolant through Mainspindle to Chuck 10 bar

106

ID	MA37829
Make	Hardinge (Taiwan)
Model	Talent 8/52
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size - 203 mm Bar Capacity - 52 mm Axis - 2 Power - 11.2 kw Max. RPM - 5,000 RPM Turning Dia - 279 mm Swing - 457 mm Machine Length - 406 mm Tailstock - YES Live Tooling - NO Sub Spindle - NO Dimensions - 78'' LR x 64'' FB x 72'' H

107

ID	MA37818
Make	Daewoo
Model	500
YOM	2001
Condition	Good Condition
Photo	See Photo
Turning length 1550 mm Spindle bore 132 mm X/Z movements 370/1575 mm Spindle speeds 1500 rpm Swing over bedways 900 mm Swing over slide 630 mm Turret w/12 stations Control: Fanuc 18i-T Equipped with: Hydraulic chuck 450 mm dia. Chip conveyor Varioous holders (se photos)

108

ID	MA37806
Make	Victor-Taichung
Model	VTurn 45
YOM
Condition	Good Condition
Photo	See Photo
Chuck Size 15 Inch (380 mm) Z Axis - 2200 mm Swing over Bed - 780 mm Std. Turning Dia - 520 mm Max. Turning Dia - 620 mm Swing Over Carriage - 620 mm Center Distance - 2165 mm

109

ID	MI10283
Make	Macpower
Model	VX200Super
YOM	2012
Condition	Good Condition
Photo	See Photo
DIA -200 LENGHT -500 CONTROL - FANUC ( OI MATE TD)

110

ID	MI10282
Make	PMT
Model	Supercut 8N
YOM	2008
Condition	Good Condition
Photo	See Photo
DIA -250 LENGHT - 375 CONTROL - FANUC ( OI MATE TC) WITH STABLISER

111

ID	MI10276
Make	LMW
Model	LX20L3
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck Size - 200 mm Without Stabilizer

112

ID	MI10272
Make	Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Controller :Fanuc0T Swing Over Bed :1070mm 42" Swing Over Carriage :680 mm Swing Of Gap: Width Of Bed:665mm Distance Between Center :2000 mm Axis Travel:X680 mm Spindle Nose (Chuck) :24"inch Max Spindle Speed :1-680 rpm No Of tools:8 Spindle Bore:153 mm Spindle Motor:Main Spindle 30 min rating

113

ID	MI10271
Make	ACE Micromatic
Model	5075 Simple Turn
YOM	2018
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size 300 Turning dia 450mm Swing over bed 500mm Between centre 500mm Fanuc oi-TF controller With TailStock available for sell only machine

114

ID	MI10270
Make	Cincinnati
Model
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
300 chuck 1 mtr turning length Fanuc 21i 80 mm bore

115

ID	MA37794
Make	MAZAK
Model	KM4220
YOM
Condition	Good Condition
Photo	See Photo
Chuck 8"

116

ID	MI10255
Make	MDM
Model
YOM	2012
Condition	Good Condition
Photo	See Photo
Control: Fanuc OiTD, card Facility available, Chuck :8 Inch Turning length; 510mm Spindle A26 Spindle Motor 11/15kw Turret; 10 stations servo Tailstock Chipconveyor Level pads Manuals Stepdown Transformer Machines like a New Brands look,

117

ID	MA37753
Make	DMG MORI
Model	CTX alpha 500
YOM	2018
Condition	Good Condition
Photo	See Photo
turning diameter 240mm turning length 500mm steering Sinumerik 840 D sl Celos Swing diameter max. 510 mm Main spindle: Speed range - main spindle max. 5,500 min/-1 Drive power - main spindle 14/13kW Max. Torque 192 / 172 Nm Internal draw tube diameter 66mm C axis 0.001� Spindle diameter in the front. camp 100mm max. chuck diameter 215mm Spindle nose 140H5 Tool turret: Number of tool slots 12 pos. Number of powered tool stations 12 pos. Tool holder VDI 30 Speed range - driven Tools max. 5,000 min -1 Drive power - driven Tools 5.4kW Max. Torque 18 Nm y axis +/- 40mm Travel paths: X axis 210mm y axis (+/- 40) 80mm z-axis 525mm Feeds: Rapid traverse (X / Y / Z) 30 / 22.5 / 30 m/min feed force 4.5 / 4.5 / 7.5 kN Total power requirement 20kVA Machine weight approx. 4.3 tons Space requirement approx. 4.5 x 3.0 x 2.2 m Accessories documentation chip conveyor Coolant device High pressure cooling 8/20 bar Tailstock Hydraulic unit Signal lamp driven tool positions C axis Y axis Three-jaw chuck ROTA THM Plus 165-43 Tool measuring arm Hollow clamping device Oil mist separator 3D model Paper band filter steering Sinumerik 840 D sl Celos only 4,400 spindle hours

118

ID	MI10244
Make	Sunfirm
Model	CMT 79
YOM	2018
Condition	Good Condition
Photo	See Photo
Admit between center 4000mm Swing over bed 2000mm Swing over cross slide 1600mm

119

ID	MI10242
Make	Lokesh
Model	TL30
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck - 300mm OD - 400mm Length - 500mm A28 spindle bore

120

ID	MI10229
Make	Doosan
Model	PUMA 2000SY
YOM
Condition	Good Condition
Photo	See Photo
Control Type Fanuc 18iT # Axis - 5 Swing -23.6 Turning Diameter -13 Center Distance - 20.1" Bar Capacity- 2.625" X Axis Travel-9.8" Y Axis Travel - 3.94" Z Axis Travel-22.8" Spindle Nose - A2-6 Spindle Speed- 4,500 rpm Main Motor- 20 hp Sub Spindle Chuck Size 6" Sub Spindle Speed- 6,000 rpm Sub Spindle Motor 10 hp 6,000 rpm Live Tooling Motor 5 hp Y Axis (Yes / No) yes Turret Capacity 12 Dimensions 115" x 67" x 78" Weight 10,500 pounds

121

ID	MI10225
Make	Daewoo
Model	PUMA 2000LY
YOM	2004
Condition	Good Condition
Photo	See Photo
CNC FANUC 18i � T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. Machining diameter 330 mm. Max. Machining length 760 mm. Draw tube Dia- 65 mm Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 830 mm. Y Axis Traverse 100 (�50) mm. C Axis Traverse 360� (�50) mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 � Through hole � 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle Spindle Chuck � � 210 mm Sub Spindle Chuck � � 160 mm 2 Axial Live Tool Holder INCLUDED 2 Radial Live Tool Holder INCLUDED Tool pre-setter INCLUDED Cutting Oil Pump high pressure (7Bar) INCLUDED Others Machine Dimension 4.230 mm x 2.250mm x 2.060 mm.

122

ID	MA37706
Make	Mori Seiki
Model	LL-7B/3500
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
Controller：MSD-501Ⅱ (FANUC-18iTA) Swing over bed　：　1090 mm Swing over cross slide　：　520 mm Distance between centers　：　3500 mm Max. turning length　：　3705 mm Travel　X：675 mm　Z：3505 mm Spindle speed　：　1～750 rpm Spindle speed range　：　2 Spindle taper　：　JIS A2-15 Through-spindle hole diameter　：　216 mm Number of turrets　：　1 Tailstock spindle taper　：　MT6 Tailstock travel　：　200 mm Required floor space　：8442�4360 mm (Chip conveyor included) Machine height 　：　1892 mm Machine weight ：　13000 kg Chip conveyor φ1000 4-jaw independent chuck Steady rest φ400 Square turret (Opposed turret not included) Interactive program CAPⅡ Tape memory length 160m Registerable programs 125

123

ID	MA37693
Make	HYUNDAI WIA
Model	SKT15
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Chuck 6" Tool setter Tail stock Chip conveyor Bucket Control Fanuc

124

ID	MI10164
Make	sands
Model	SLT-250
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck diameter 300mm Turning length 1200mm With steady rest

125

ID	MA37634
Make	MAZAK
Model	Integrex 30
YOM	1995
Condition	Good Condition
Photo	See Photo
Turning length 1000 mm X 450 mm Y +/- 90 mm Z 1000 mm Max. swing 510 mm Max. turning diameter 400 mm Spindle bore 76 mm Spindle speeds 3000 rpm on main spindle Spindle speeds 6000 rpm on mill spindle Tool changer w/ 40 stations Hydraulic tailstock Control: Mazatrol T-Plus Equipped with: Hydraulic 3-jaw chuck Chip conveyor App.20 holders for turning

126

ID	MI10149
Make	Galaxy
Model
YOM
Condition	Good Condition
Photo	See Photo
CHUCK SIZE :165 WITH TAILSTOCK AND STANDARD STABILIZER

127

ID	MA37607
Make	Takisawa,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
MAXIMUM SWING 320.0 mm STANDARD TURNING DIAMETER 220.0 mm MAX TURNING DIAMETER 220.0 mm MAX TURNING LENGTH 200.0 mm TRAVEL Y-Axis: 120.0 mm Z-Axis: 250.0 mm SPINDLE SPEED RANGE 6000 Rpm THROUGH SPINDLE HOLE DIA 53.0

128

ID	MA37606
Make	Takisawa,Japan
Model	TT160
YOM	2001
Condition	Good Condition
Photo	See Photo
Swing: 13.38" Chuck size: 6" Power: 15 hp Max rpm: 4,000 RPM Turning dia: 5.16"

129

ID	MA37599
Make	BOEHRINGER
Model	NG200-2
YOM	2004
Condition	Good Condition
Photo	See Photo
Type [type]: NG200-2/2 CNC double Control unit: Siemens 840D Turning length: 850 mm

130

ID	MA37586
Make	Tongil,Korea
Model	TNV-120V
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
CNC CONTROL FANUC Series 18-T MACHINE WEIGHT 10500 kgf Max Rotating Diameter On The Bench 1500 mm Max Diameter Turning On The Bench 1300 mm Max Turning Length From Chuck 890 mm Max Permissible Overhang Weight (Including chuck, which weighs 700 kgf) 4700 kgf Spindle Spindle Nose, Flange Connection Diameter 460 mm 3-jaw hydraulic chuck AUTOBLOK mod. IRC-1000, with cross joint and adjustable base jaws, complete with hydraulic cylinder mod. SIN-S 250, diameter 1000 mm Continuously Variable Spindle Rotation Speed 1-400 min/sec Speed Ranges with Automatic Transmission 2 nr Spindle Motor power (cont./30 min.) 30/37 kW Maximum power available From 29 min/sec Max. Spindle Motor Torque (cont./30 min.) 9688/11948 Nm Front Bearing Diameter 400 mm Spindle Bore Diameter Chiuso mm

131

ID	MA37549
Make	SMEC
Model	PL 600AW
YOM	2017
Condition	Good Condition
Photo	See Photo
Swing Over bed : 830mm Swing Over Saddle : 720mm Recom. Turning Diameter : 610(25*Wheel) Maximum Turning Diameter : 670mm Maximum Turning Lenght : 710mm Chuck Size : 24" Spindle Speed : 2000rpm Spindle Nose : A2-11 Bore Diameter : 132mm Spindle Drive Motor : 37/30 Axis Travel (x/z) : 360/680 Rapid Traverse (x/z) : 20/24 Feed Motor (x/z) : 4/7kw Number of tool stations : 12st Indexing Time : 0.25sec Shank Size for Square tool : 32 x 32mm Shank Diameter for boring Bar : 60mm Electric Power Source : 60kva Floor Space (L x W) : 3845mm x 2090mm Machine Height : 2195mm Machine Weight : 7800kg CNC Controller : Fanuc Oi TF

132

ID	MI10054
Make	Ace,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck diameter 200mm Turning length 400mm live tools 2nos available With Tailstock & stabilizer

133

ID	MI10031
Make	Ace,India
Model	J300LM
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck : 200 Control : Fanuc TF

134

ID	MA37517
Make	Denver
Model	DHL-1120x2000
YOM	2013
Condition	Good Condition
Photo	See Photo
Controller Fanuc Oi-TD Spindle Rpm 350 rpm No.of Tool Change 8 Tools Power Supply 55KVA Max Amps 78A Max. swing over bed 1120 (44") Center height 560(22") Swing over cross slide 760 (29.92") Z axis travel changed by different turret Width of bed 610(24") Spindle bore 152(6") Spindle nose A2-11 OP-A2-15 Range of spindle speed 6-500 rpm Range speed 19-112 mm Spindle speed is changed by different horse No. of spindle speeds Auto 4 steps/Hydraulic

135

ID	MA37516
Make	Feeler
Model	FTC350SLY
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
8 inch chuck, 6 inch sub spindle. Y axis . Fanuc series 31i-Model B Milling function.

136

ID	MA37514
Make	MAZAK
Model	SLANT TURN 50N-3000U
YOM	1998
Condition	Good Condition
Photo	See Photo
31� x 120� OIL COUNTRY CNC LATHE WITH 10� HOLE THRU THE SPINDLE. MAZATROL T PLUS CONTROLS Chuck Size 21" Bar Capacity 10" Axis 2 Power 50 hp Max speed 750 RPM Turning Dia 22.05" Swing 31.69" Machining Length 118.25" Tailstock Yes Dimensions 229x105x107 Weight 31,000 Equipped With Chuck was removed off the machine on a pallet, not pictured. Hydraulic tailstock. Swarf conveyor, Mazatrol T Plus CNC Control.

137

ID	MA37511
Make	MAZAK
Model
YOM	1999
Condition	Good Condition
Photo	See Photo
Quick Turn 250 � Chuck Size: 8" � Swing Over Bed Ways: 23.6" � Max. Turning Diameter: 15.7" � Max. Turning Length: 19.7" Spindle: � Speeds: 5,000 RPM � Bar Capacity: 2" � Nose: A2-6 � Main Motor: 20 HP Turret: � Number of Positions: 12 Tools � X-Axis Travel: 8.46" � Z-Axis Travel: 20.1" Rapids: � Rapid Traverse (X & Z ): 1181 x 1299 IPM Dimensions: � Floor Space (L x W): 107" x 63.8" � Weight (approx.): 9,900 Lbs Equipped With: � Kitagawa B-208A615-D Chuck � Mazatrol Fusion 640 Control � Tailstock

138

ID	MA37483
Make	Tatung-Okuma
Model	L250E
YOM	2007/2012
Condition	Good Condition
Photo	See Photo
Chuck 8" Controller OSP-P200L-R Travel X/Z 160/330mm Tools 8 pcs

139

ID	MA37477
Make	Daewoo Puma
Model	500
YOM
Condition	Good Condition
Photo	See Photo
Turning length 1550 mm Spindle bore 132 mm Control: Fanuc 18i-T Equipped with: Hydraulic chuck 381 mm dia. Chip conveyor Varioous holders (se photos) X/Z movements 370/1575 mm Spindle speeds 1500 rpm Swing over bedways 900 mm Swing over slide 630 mm Turret w/12 stations

140

ID	MI9974
Make	Dalian
Model
YOM
Condition	Good Condition
Photo	See Photo
Turning 2000 mm length Turning dia 800 Atc not working

141

ID	MI9955
Make	LMW
Model	Smarturn
YOM
Condition	Good Condition
Photo	See Photo
6" chuck 300 mm langth with stabilizer seminse control Two Machines YOM -2008 and YOM - 2012

142

ID	MI9932
Make	Lokesh
Model	TL20
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck 200 Length 400 With tailstock Fanuc oi tc

143

ID	MI9931
Make	Haas
Model	SL30
YOM	2006
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size - 10.0" Standard Bar Capacity - 3.0" Between Centers - 39.0" Max Cutting Dia - 17.0" Max Cutting Length - 34.0" Spindle - 30HP MAx RPM - 3,400 rpm Swing Over Apron - 30.0" Over Cross Slide - 14.5" X-Axis - 11.3" Z-Axis - 34.0" 12 Turret

144

ID	MA37422
Make	puma
Model	2500 SLY
YOM	2004
Condition	Good Condition
Photo	See Photo
FANUC CNC 18j-TB control Self-centering: 250 Turnable diameter: 330mm Turnable length: 750mm Bar passage: 64mm Axes: x, z, y, c Motorized tools

145

ID	MA37413
Make	Tacchi
Model	FTA51/R660
YOM	1980 Revision 2003
Condition	Good Condition
Photo	See Photo
Hight center: mm 620 Lenght work mm 3000- 5000 Diameter work: mm 1940-1240- Power alimentation: 380V 50 Hz head hole: mm 120 weight: kg. 9.000 Accessoried - read out

146

ID	MI9876
Make	ACE Micromatic
Model	LS 06
YOM	2020
Condition	Good Condition
Photo	See Photo
chuck -165 mm axes -2wing Over Bed mm 180 Swing over carriage: mm 460 Maximum Turning Dia : mm 150

147

ID	MA37404
Make	Mori Seiki
Model	SL-65B
YOM
Condition	Good Condition
Photo	See Photo
Max Turning Diameter: 32.3″ Max Turning Length: 34.9″ Max Bar Capacity: 6.3″ Swing Over Carriage: 22.0″ Swing Over Bed: 35.0″ Distance Between Centers: 35.4″ X Axis Travel: 17.1″ Z Axis Travel:�33.9″ Rapid Traverse�X Axis:�197 IPM Rapid Traverse Z Axis:�315 IPM Spindle Nose:�A2-11 Spindle Bore:�6.67″ Spindle Speed:�4 � 1010 RPM Spindle Motor:�50 HP Turret Capacity:�12 Stations Turret Index Time:�1 Second Tailstock Travel: 26.8″ Tailstock Quill Dia.: 4.3″ Tailstock Quill Stroke: 3.9″ Tailstock Taper: MT-4 12-Station Turret Box Ways Design Long Bed Machine Fanuc MF-T4 CNC Control Collet chuck Geared Head�spindle for powerful torque Hydraulic Tailstock Chip Conveyor Coolant System. Automatic Lubrication system Foot Operated Control for Chuck Coolant Tank Comes with Chip Conveyor

148

ID	MI9854
Make	Tsugami
Model
YOM	2018
Condition	Good Condition
Photo	See Photo
TECHNICAL SPECIFICATIONS TURNING LATHE -200*300MM

149

ID	MA37363
Make	Tongtai
Model	MT200
YOM	2017
Condition	Good Condition
Photo	See Photo
Twin Spindle/Twin Turret Horizontal Turning Center Pitch of Spindles: 17.32" Max. Swing Diameter: 8.26" Max. Swing Diameter over Saddle: 9.05" Max. Turning Diameter: 8.26" Max. Turning Length: 5.70" Spindle Nose: A2-6 Spindle Speed: 4,500 RPM Chuck Size: 8" Spindle Bearing Diameter: 3.93" Turret Tool Capacity: 12 X/Z Axis Stroke: 6.10" x 6.20 X/Z Axis Rapid Traverse: 1,182" IPM Cutting Feedrate: 0-197" IPM Power on Hours: 21,718 Run Time: 3,042 Cutting Time: 4,368

150

ID	MI9818
Make	Daewoo
Model	PUMA 12 LC
YOM
Condition	Good Condition
Photo	See Photo
MAX SWING :570 MAX DIA:480 X TRAVEL:1050 SPINDLE BORE:132 SPINDLE TAPER:A211 BAR CAPACITY :117 CHUCK DIA :381 SPINDLE POWER:35HP SPINDLE:GEAR BOX FANUC 0TC WITH ALFA DRIVES CHIP CONVEYOR 45 KVA SERVO STABILIZER

151

ID	MA37345
Make	Pinacho
Model	Taurus260
YOM	2010
Condition	Good Condition
Photo	See Photo
CNC Fanuc 0i-TC Swing Over Bed 530mm Distance between centres 1000mm Swing Over Cross Slide 475mm Centre height 260mm Spindle Speeds 2500 r.p.m. Spindle Bore 80mm number of guides and type 2 Standard Turret / tool post 8 pos.- CNC VDI30 Feeds 10m/Min Bed width 350mm 3 jaw chuck Dia. 250mm - Hidr. / Hydr. (Halder) Refrigeration through the herramienta, hydraulic counterpoint Equipped with Through tool coolant, hydraulic tailstock Motor 11KW Length 2575mm Width 1720mm Height 1575mm Weight 2700 kilos

152

ID	MI9793
Make	Chevalier,Taiwan
Model	1840S
YOM	2003
Condition	Good Condition
Photo	See Photo
Manufacturer Chevalier Model 1840S Condition Used Swing over Bed 460 mm Distance between Centers 1000 mm Swing over Cross Slide 230 mm Spindle Speeds 40 rpm to 2800 rpm CNC Control Siemens 810D Year of Make 2003 Other Specification 1 Complete with lots of accessories & tooling. Other Specification 2 Complete with operating manual, electrical drawings etc. Other information Machine is in excellent condition.

153

ID	MA37333
Make	Daewoo
Model	Puma300LB
YOM	2002
Condition	Good Condition
Photo	See Photo
Bar Capacity: 3.5" Chuck Size: Collet Spindle Speed: 3,500 RPM Spindle Motor: 30 HP X Axis Travel: 11.1" Z Axis Travel: 52.36" Rapid Rate Z Axis: 945 IPM Turret Tools: 12 Station Rapid Rate X Axis: 787 IPM Max Turning Dia: 15.7" Max Turning Length: 51.5" Max Swing: 23.2" Spindle Nose A2-8 Dimensions: 161" x 90" x 80" Weight: 15,000 LBS Options: Tool Presetter Tailstock Fanuc 21i-T Control Double Head Steady Rest Collet Chuck 10" 3 jaw chuck included

154

ID	MA37313
Make	Daewoo
Model	PUMAMX2500
YOM	2005
Condition	Good Condition
Photo	See Photo
# AXIS 6 MAX TURNING LENGTH 40.15" CHUCK SIZE 15" BAR CAPACITY 3" POWER 35 hp MAX RPM 3,500 RPM TURNING DIA 21.25" TAILSTOCK Yes DIMENSIONS 178" X 91" X 102" WEIGHT 25,353 lb

155

ID	MI9770
Make	TEKSOL
Model	CT 2575
YOM	2021
Condition	Good Condition
Photo	See Photo \| See Video
General: Swing over bed 550mm Swing over carriage 250mm Distance between centers 750mm Max. turning length 630mm Work Head: Spindle nose A2-6 Max. spindle rpm 2000 (variable with programmable VFD) Bore through spindle 56mm Motor Power: 5.5 kw Axis: X-axis stroke 180mm Z-axis stroke - 850 X-axis as well as Z-axis rapid feed 8 mtr/min Tail Stock: MT-4 type manual tail stoke Tool Turret: 4 Station Pragati make square type auto tool changer turret Tool clamping size 25mm � 25mm, Boring bar tool size 32mm Controller: Delta NC 200 digital turning controller for 2 axis inclusive of servo motors, drivers, screen, MCP, electronic hand wheel, cables etc. Electrical: Separate electrical panel board with CE marked switch gears; Machine inclusive of all electric motor, Input power: 415 V AC �1%, 50 HZ�, Machine is inclusive of all electrical. Scope of Supply (Coolant): Separate coolant tank cap. 110 ltrs with pump, piping etc

156

ID	MA37301
Make	Chevalier,Taiwan
Model	FCL-200HT
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck : 200 mm

157

ID	MI9762
Make	Tatung(taiwan)
Model
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
System: Fanuc OT ( Alpha drives) Chuck size: 400mm Max Turning dia: 650mm Max Turning length: 2000mm. With chip conveyor.

158

ID	MA37289
Make	Pinacho
Model	Smart Turn 5/260
YOM
Condition	Good Condition
Photo	See Photo
Smart-turn � 520 x 3000 mm Swing over bed 560 mm Swing over cross-slide 315 mm Distance centre tot centre 3000 mm Dia of spindle bore 80 mm Power on the spindle 11/15 kW Number of speeds 1 / 2500 rpm Command GE Fanuc touch Length 4625 mm Width 1450 mm Height 1750 mm Weight 2400 kg

159

ID	MA37288
Make	DMG Gildemeister
Model	CTXBeta500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Swing over bed 700 mm Swing over cross-slide 380 mm Distance centre tot centre 675 mm Max longitudinal travel Z-axis 550 mm Max cross travel X-axis 300 mm Dia of spindle bore 87 mm Power on the spindle 25/34 kW Number of speeds 5000 rpm Command Heidenhain Plus IT Toolchanger yes Number of tools 12 driven VDI toolpositions VDI Tooling (VDI 40 - DIN 69880-40 / DIN 5480) C-axis Shunk chuck Chipconveyor Coolant pump 12 bar - 23 l/min

160

ID	MI9758
Make	Poly Gim
Model
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Control Mitsubishi m-64 Hydraulic Chuck- 127 mm Swing Over Cross Slide-160 mm Max. Cross Travel (X axis)-230 mm Max.Longitudinal Travel (Z axis)-300 mm Bore of Spindle-38 mm Max. Bar Feeding Dia.-26 mm Spindle Nose-�85 mm Spindle Motor 3.7 kw / 5 H.P. Available 3 Machine

161

ID	MI9757
Make	Ace,India
Model	Jobber XL
YOM	2014
Condition	Good Condition
Photo	See Photo
Controller Ace Diameter 200 mm Length 400 mm

162

ID	MI9756
Make	Ace jobber
Model	Micromatic Jober
YOM	2001
Condition
Photo	See Photo
ontroller Fanuc Diameter 165 mm Length 300 mm

163

ID	MA37283
Make	Daewoo
Model	Puma6s
YOM	1995
Condition	Good Condition
Photo	See Photo
Chuck size 175 mm Turning � 381 mm � above the bed 500 mm Type of CNC FANUC OT X-axis 200 mm Z-axis 380 mm Spindle taper A0-5 Spindle bore 45.7 mm Number of tools on turret 12 Turning speed 6000 rpm Spindle motor power 11 kW

164

ID	MI9755
Make	Jyoti,India
Model	DX200-5A
YOM	2012
Condition	Good Condition
Photo	See Photo
Controller Siemens Diameter 200 mm Length 500 mm Spindle Bore 52 mm With stabilizer Control 828D simens 6 month running

165

ID	MI9754
Make	Macpower
Model
YOM	2012
Condition	Good Condition
Photo	See Photo
Controller Fanuc Diameter 200 mm Length 550 mm Spindle Bore 63 mm

166

ID	MA37280
Make	Graziano
Model
YOM	2010
Condition	Good Condition
Photo	See Photo
CNC Fanuc CNC Version 21i - T Machine Parameters Y-Axis No Turning Length 550 mm Turning Diameter 230 mm Bar Work Capacity 52 mm Spindle Spindle Nose 5 JIS A-2 / ASA Spindle Speed 5000 RPM Spindle Power 15 kW Travel X Stroke 160 mm Z Stroke 550 mm Additional Features Chuck Diameter 165 mm

167

ID	MI9752
Make	Macpower
Model	VX135
YOM	2014
Condition	Good Condition
Photo	See Photo
Chuck 135

168

ID	MI9751
Make	Galaxy
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck 165

169

ID	MI9749
Make	Ace jobber
Model	Jobber XL
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck 250 Length 400

170

ID	MI9747
Make	Daewoo Puma
Model	200 C
YOM	1998
Condition	Good Condition
Photo	See Photo
Fanuc 18T Maximum Turning Dia-300 Maximum length-500 Bar Capacity-65MM 8�Chuck 12-STATION TURRET 8″ 3-JAW CHUCK TRAVELS X : 300MM Z : 500MM TAILSTOCK MITSUBISHI CONTROLLER SPINDLE BORE : 76MM BAR CAPACITY : 65MM CHIP CONVEYOR

171

ID	MI9746
Make	Daewoo Puma
Model	230 MB
YOM	2001
Condition	Good Condition
Photo	See Photo
Control FANUC 18iT Y Axis Power Feed 580mm Swing 550mm Swing over the Cross-slide 390mm Bar Capacity 65mm Distance Between Centres 477mm Maximum Cutting diameter 290mm Maximum Cutting Length 492mm Milling RPM 6000rpm @ 3.7kW Tailstock Quill Stroke 80mm Tailstock Taper MT #4 Turret Positions 12 Station Rapid Feedrates XZ: 20 x 25m/minute Spindle Motor Power 15kW Spindle Nose A2-6 Spindle Speed 4500rpm C axis 0.001 degree X axis Travel 205mm Machine Dimensions 3313 x 1670 x 1740mm Machine Weight 4240kg

172

ID	MI9743
Make	Hardinge
Model	CONQUEST 42
YOM
Condition	Good Condition
Photo	See Photo
Fanuc O-T CNC Control 10 Station Turret Hydraulic Tailstock Parts Catcher Coolant System Max Turning Length: 350MM Max Bar Capacity: 41MM Swing Over Bed: 365MM X Axis Travel: 134MM Z Axis Travel: 353MM Rapid Traverse X Axis: 472 IPM Rapid Traverse Z Axis: 630 IPM Spindle Speed: 50 � 5000 RPM Spindle Motor: 10 HP Turret Capacity: 10 Station

173

ID	MI9742
Make	Yang
Model	ML-28A
YOM	1997
Condition	Good Condition
Photo	See Photo
CNC Turning Center Fanuc Series 0-T Controls 12-Station Turret Hydraulic Tailstock 10� 3-Jaw Power Chuck 5C Spindle Nose Chip Conveyor Coolant TECHNICAL DETAILS: Max. turning dia.: 280 mm Max. turning length: 520 mm Swing over bad: 550 mm Dis.between center: 600 mm Spindle nose: ASA A2-6 Spindle motor: 11 kW Max speed: 4500 rpm Z axis travel: 520 mm Z axis rapid travel: 20 m/min Turret head: 8 positions 25�25 mm Tailstock stroke: 384 mm Tailstock quill stroke: 150 mm

174

ID	MI9741
Make	Akiraseiki
Model	ASL-35
YOM	1999
Condition	Good Condition
Photo	See Photo
ChuckSize 10 inch BarCapacity 75MM Axis 2 Power 25 hp MaxRPM 4000 rpm TurningDia 400MM Swing 600MM MachiningLength 600MM Tailstock Yes Control CNC (Fanuc O-T)

175

ID	MI9740
Make	Okuma
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck size :- 180 mm Between Center :- 450 mm Complete under power machine with full book set and manual. With full toolings and accessories.

176

ID	MA37270
Make	Kia,Korea
Model	SKT-100
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuck 6 inches (150 mm) Bed swivel diameter: 550mm Workpiece length: 300mm Workpiece diameter: 350mm Bar diameter: 45mm Spindle speed: 6000rpm Spindle through hole diameter: 53mm XZ axis stroke: 210*330mm Factory date: 2010 System: Fanuc system

177

ID	MA37267
Make	Geminis
Model	Goratu Maquinas
YOM	2002
Condition	Good Condition
Photo	See Photo
turning diameter 720 mm turning length 4000 mm control Siemens Sinumerik 810 D

178

ID	MA37266
Make	Femco
Model	HL25
YOM	2002
Condition	Good Condition
Photo	See Photo
aa

179

ID	MA37265
Make	Tongil,Korea
Model	TNL45
YOM	2000
Condition	Good Condition
Photo	See Photo
Ghis machine before Year 2000

180

ID	MA37264
Make	Okuma
Model
YOM	2006
Condition	Good Condition
Photo	See Photo
Okuma L270 Year 2008 2 MACHINE ARE AVAILABLE

181

ID	MA37259
Make	Victor
Model	VT PLUS-20
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Fanuc OT 8 inch 8 tool Tailstock Chip converyer

182

ID	MA37257
Make	Victor
Model	VT PLUS-15
YOM	2002
Condition	Good Condition
Photo	See Photo
Fanuc OT 6 inch 12 tool Tailstock Chip converyer

183

ID	MA37247
Make	Goodway
Model	GLS150
YOM	2013
Condition	Good Condition
Photo	See Photo
Hydraulic Chuck 3 Jaw : 6 inch Swing over bed : 500mm Swing over Saddle : 310mm Max turning Diameter : 185mm Max turning Length : 500mm Bar Capacity : 50mm Max Spindle Speeds : 6,000 rpm Turret station: 10 nos Net Weight : 3200 kg

184

ID	MA37226
Make	Okuma,Japan
Model	LB3000 EX II-R
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck 12� 12 tools Supply Voltage - 415 V Phase - 3P Frequency - 50 HZ Rated Capacity - 38 Kva Full Load Current - 52.9 A Largest Mot Rate - 21.9 Short Circuit Rating - 2.5

185

ID	MI9735
Make	Pinacho
Model	SE 200 X 750
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
200X750MM LONG SIEMENS CONTROLLER 808D. IN COLLABORATION WITH SPAIN.

186

ID	MA37218
Make	MAZAK
Model	Integrex30
YOM	1997
Condition	Good Condition
Photo	See Photo
Technical details Machine length 6365 mm Machine width 3180 mm Machine Height 2800 mm Weight Of The Machine Ca. 7 t Bar passage 64 mm Max rotation diameter 510 mm Turning Diameter 400 mm Turning Length 1539 mm Spindle power 22-26 kW Spindle Speed Min. 35 RPM Spindle Speed Max. 3500 RPM Rapid Travel Speed X-Axis 12 m / min Rapid Travel Speed Y-Axis 10 m / min Rapid Travel Speed Z-Axis 18 m / min Motor power milling spindle 7,5 kW Max. speed milling head 15-6000 RPM X-axis travel 450 mm Y-axis travel +/- 90 mm Z-axis travel 1539 mm Number of tools in the chain magazine 40 (15 + 25) POS

187

ID	MA37217
Make	MAZAK
Model	Quick Turn Nexus 250-II
YOM	2008
Condition	Good Condition
Photo	See Photo
SPECIFICATIONS: MAX. SWING 26.57" MAX TURNING DIAMETER 18.73" SPINDLE BORE/MAX BAR CAPACITY 3.46"/ 3.0" Z TRAVEL 20.25" X TRAVEL 7.5" MACHINING LENGTH 19.85" CHUCK SIZE 10" CHUCK TYPE Hydraullic SPINDLE MOTOR 3530 hp SPINDLE SPEEDS (RPM) 4000 SPINDLE BORE 3.46 in MAX. BAR CAPACITY 3" TURRET TOOL POSITIONS 12 TAILSTOCK Yes CHIP CONVEYOR Yes CONTROL CNC (MAZATROL MATRIX NEXUS) DIMENSIONS 104" X 70" X 73" WEIGHT 10,800LBS EQUIPPED WITH: MAZATROL NEXUS CNC CONTROL CHIP CONVEYOR KITAGAWA B-210 3 JAW CHUCK

188

ID	MA37216
Make	Mazak,Japan
Model	4000 -III
YOM	2013
Condition	Good Condition
Photo	See Photo
MACHINE WEIGHT: 10300 KG SPINDLE SPEED RANGE: 18000 1/MIN NUMBER OF AXIS: 4 QUALITATIVE MACHINE BENEFITS: - NOT CE CERTIFIED

189

ID	MA37214
Make	MAZAK
Model	INTEGREX 200Y
YOM	2002
Condition	Good Condition
Photo	See Photo
Mazatrol PC-Fusion 640.MT Maximum length: 1000 Maximum diameter: 550 Bar diameter: 51 Spindle speed: 5000 & 6000 rpm Spindle bore: 61 Indexing (C axis) 0�-360�/0.001� Tool changer: 40 Tailstock travel 900 mm MK 4 entry 140mm cannon

190

ID	MA37213
Make	MAZAK
Model	Quick Turn Nexus 250-II
YOM	2008
Condition	Good Condition
Photo	See Photo
MAX. SWING 26.57" MAX TURNING DIAMETER 18.73" SPINDLE BORE/MAX BAR CAPACITY 3.46"/ 3.0" Z TRAVEL 20.25" X TRAVEL 7.5" MACHINING LENGTH 19.85" CHUCK SIZE 10" CHUCK TYPE Hydraullic SPINDLE MOTOR 3530 hp SPINDLE SPEEDS (RPM) 4000 SPINDLE BORE 3.46 in MAX. BAR CAPACITY 3" TURRET TOOL POSITIONS 12 TAILSTOCK Yes CHIP CONVEYOR Yes CONTROL CNC (MAZATROL MATRIX NEXUS) DIMENSIONS 104" X 70" X 73" WEIGHT 10,800LBS EQUIPPED WITH: MAZATROL NEXUS CNC CONTROL CHIP CONVEYOR KITAGAWA B-210 3 JAW CHUCK

191

ID	MA37208
Make	Doosan
Model	Puma400C
YOM	2013
Condition	Good Condition
Photo	See Photo
30� x 40� CNC Lathe with 7.1� hole thru the spindle. Maximum Swing 30.3 inches Maximum Cutting Diameter 21.7 inches Maximum Cutting Length 40.3 inches X-Axis Travel 14.3 inches Z-Axis Travel 43.5 inches Chuck Size 20 inches Bar Capacity 7.1 inches Spindle Bore 7 inches Spindle Nose A1-15 Spindle Motor 50 HP Spindle Speed 1500 rpm Turret Positions 12 Pendant Mounted Doosan Fanuc i CNC Control with Full LCD Display, keyboard, MPG, USB and Flash Ports. 20" 3-Jaw Front Mounted Manual Chuck with 8" Hole Thru. 20" 3-Jaw Rear Mounted Air Chuck with 7.5" Hole Thru. Programable Tailstock. Tool Presetter. 12 Position Turret. Coolant System and Chip Conveyor. Manuals.

192

ID	MI9705
Make	Topper,Taiwan
Model
YOM	2001
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Dia -315 MM Turning Length -1000 MM

193

ID	MA37200
Make	Mazak Integrex
Model	I 400 ST
YOM	2011
Condition	Good Condition
Photo	See Photo
2011 Mazak Integrex I-400ST Multi-Axis CNC Lathe, 12000 RPM Milling Spindle, Sub-Spindle, B-Axis, Y-Axis, Hydraulic Chucks, Chip Conveyor EQUIPPED WITH: Full 5-axis Milling spindle B-axis Y-axis C-axis 12" & 10" hydraulic chucks Chip conveyor SPECIFICATIONS: MAX SWING 26.9" TURNING DIA 26.9" # AXIS 9 CHUCK SIZE (MAIN) 12" CHUCK SIZE (SUB) 10" BAR CAPACITY 4" POWER (MAIN) 40 hp POWER (SUB) 30 hp POWER (MILLING TOOL) 30 hp MAX RPM (MAIN) 3,300 RPM MAX RPM (SUB) 4,000 RPM X-AXIS TRAVEL 24.21" Y-AXIS TRAVEL �4.92″ B-AXIS ROTATION +210� ~ -30� C-AXIS ROTATION 0.0001� Z-AXIS TRAVEL 62.4" TAILSTOCK No LIVE TOOLING Yes SUB SPINDLE Yes RAPID TRAVERSE (X/Z) 1,969 / 1,575 in/min. TURRET CAPACITY (LOWER) 9 ATC POSITIONS 36 CONTROL CNC (Mazatrol Matrix 2) DIMENSIONS 205" X 110" X 107" WEIGHT 37,840 lb

194

ID	MA37193
Make	Okuma
Model	LH35N
YOM	1991
Condition	Good Condition
Photo	See Photo
Between center 2000　 OSP-5020

195

ID	MI9690
Make	Kinwa
Model	CL-38/2500
YOM
Condition	Good Condition
Photo	See Photo
DISTANCE BETWEEN CENTERS: 2500mm CENTER HEIGHT: 330mm SWING OVER BED: 660mm SWING OVER CROSS SLIDE: 370mm SPINDLE BORE: 120mm WIDTH OF BED: 460mm 8 station Turret. CONTROL: FANUC Series 0-T Chip conveyor complete runnin

196

ID	MA37179
Make	Mazak Integrex
Model	400-IIIS
YOM	2005
Condition	Good Condition
Photo	See Photo
Chuck Size: 12" Distance Between Centers: 60" Bar Capacity: 4.02" Turret: 8 Station Swing: 34" Chip Removal: Chip Conveyor Turning Diameter: 30" Spindle Motor: 40 HP Spindle Speed: 3,300 RPM Live Tooling: C-Axis Live Tooling Control: Matrix CNC QUIPPED WITH : High Pressure Coolant Sub Spindle

197

ID	MA37178
Make	Mazak Integrex
Model	400ST
YOM	2007
Condition	Good Condition
Photo	See Photo
X-axis travel: 615mm, X2-axis travel: 230mm, Y-axis travel: 260mm, Z-axis travel: 1585mm, Z2-axis travel: 1388mm, W-axis travel: 1674mm, B-axis travel: -30-210 degrees, minimum indexing: 0.0001 degrees, ATC 40-tool magazine, First spindle: 12-inch hydraulic chuck, 30kW, 3000 RPM, Second spindle: 10-inch hydraulic chuck, 26kW, 4000 RPM, Milling spindle: HSK63 spindle shank, 22kW, 12000 RPM, Maximum machining diameter: 668mm, Maximum machining length: 1519mm.

198

ID	MA37177
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
Total power requirement 48 kW Machine weight approx. 9650 kg Space requirement approx. 5.4x2x2.9 m Spindle bore 88 mm max. turning diameter over slide: 390 [mm] max. turning diameter over bed: 610 [mm] max. turning length: 1528 mm max. spindle speed: 35 3500 [rpm] Tool holder type: KM 63 Tool magazine: 40 positions Tailstock Mazatrol PC Fusion 640 T CNC Milling spindle at the top for turning and milling tools (B-axis) C axis Y axis 210 mm 9-fold tool turret below Main spindle: 3-jaw chuck Kitagawa B -15 (400 mm) chip conveyor Coolant device

199

ID	MI9666
Make	Sunfirm
Model	CST42120
YOM	2013
Condition	Good Condition
Photo	See Photo
500 mm chuck 3 meter length

200

ID	MI9656
Make	Ace,India
Model	LT20
YOM	2015
Condition	Good Condition
Photo	See Photo \| See Video
Spindle size - A2-8 Chuck size - 300mm Between center - 600mm Spindle power - 11/15 kw Control -Fanu OITD Without stepilizer

201

ID	MI9650
Make	Tsugami
Model	M08J
YOM	2018
Condition	Good Condition
Photo	See Photo
Chuck : 200

202

ID	MI9646
Make	CLAUSING COLCHESTER
Model	CNC-4000
YOM
Condition	Good Condition
Photo	See Photo
Clausing Colchester Lathe Cnc

203

ID	MA37124
Make	Goodway
Model	GS200-MSY
YOM	2011
Condition	Good Condition
Photo	See Photo
MACHINERY SPECIFICATIONS SPINDLE SPEED - 4800 rpm MACHINE WEIGHT - 5800 Kgs FREQUENCY - 50/60 HZ VOLTAGE - 380 VOLTS MAIN POWER SWITCH - 80 A CURRENT RATING OF SPINDLE MOTOR - 69A SHORT CIRCUIT CURRENT - 15 KA / 380 V RATED CAPACITY - 45 KVA

204

ID	MA37084
Make	Mazak Integrex
Model	200-3ST
YOM	2005
Condition	Good Condition
Photo	See Photo
Mazatrol 640MT Pro Control Live Tooling & Y Axis (40) Station Tool Changer Tool Presetter \| Tailstock Lower Turret Simultaneous 5 Axis Machining Max swing diameter on bench: � 660 mm Max swing over carriage upper turret / lower turret: � 660 mm / � 500 mm Max turning diameter on upper turret / lower turret: � 660 mm / � 260 mm Max turning length: 1.016 MM Bar diameter capacity on main spindle / sub-spindle: � 65 mm / � 65 mm Max piece load capacity on main spindle / sub-spindle: 300 Kg / 300 Kg X1 axis travel: 580 mm X2 axis travel: 150 mm Z1 axis travel: 1.045 mm Z2 axis travel: 990 mm Y axis travel: 160 mm W axis travel: 1.050 mm C axis (main spindle rotation / sub-spindle): �360� / � 360� Main spindle collet chuck type: BELLEGRANDI MSCTN70-A6� Main spindle speed: 35 � 5.000 Rpm Main spindle nose: ASA A2-6 Main spindle motor power (cont./30 min.): 15/22 kW Main spindle c axis angular positioning of spindle with hydraulic axis locking system: 0.001� Sub-spindle chuck diameter: � 210 mm Sub-spindle speed range: 35 - 5.000 Rpm Sub-spindle nose: ASA A2-6 Sub-spindle motor power (cont/30 min): 11/18,5 kW Sub-spindle c axis angular positioning of sub-spindle with hydraulic axis locking system: 0.001� Milling spindle nose type: CAPTO C6 Milling spindle speed range: 15 - 12.000 Rpm Milling spindle motor power (cont./30 min.): 5,5 / 15 kW Milling tool magazine capacity: 40 stations Milling tool max diameter: � 125 mm Milling tool max length: 300 mm Tool dimensions / boring bar diameter: 25x25 mm / � 32 mm Lower turret positions: 9 positions Lower turret tool dimensions / boring diameter: 25x25 mm / � 32 mm Rapid feed x1/x2/z1/z2 axes: 38.000 mm/min Rapid feed y axis: 26.000 mm/min Rapid feed w axis: 30.000 mm/min

205

ID	MA37080
Make	Mazak,Japan
Model	Integrex 200III-ST
YOM	2005
Condition	Good Condition
Photo	See Photo
Mazatrol 640 MT PRO - 40 TOOLS HSK63, 12000RPM - LOWER TURRET 8 STATIONS - THRU THE SPINDLE (TURNING) 66. 5MM (2 5/8�) - 15BAR HIGH PRESSURE COOLANT ON MILLING SPINDLE - AIR BLOW CHUCK - AIR BLOW THRU SPINDLE - SHOWER COOLANT - COOLANT THRU SPINDLE - CHILLER / TEMPERATURE CONTROL FOR COOLANT - 2 SPINDLE

206

ID	MI9622
Make	Daewoo Puma
Model	12L
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
Chuch 315mm Maximum turning dia 450mm Maximum turning length 1000mm Station 10 Funuc ot control Through hollow 77mm Tool prob setter

207

ID	MI9620
Make	Buchi
Model	SK40P
YOM	2018
Condition	Good Condition
Photo	See Photo
cnc lathe with 1500 mm length Fanuc

208

ID	MA37059
Make	Tsugami
Model	UGC
YOM	2006
Condition	Good Condition
Photo	See Photo
NC Control Fanuc Series 21i-TB Marposs P1c/E9 chuck dia 101 / 4 In mm Spindle 3 Mx. Work Piece length 100 mm Main axis Speed 1500 rpm Travels (XZ) 350 x 230 mm coolant Tank Capacity 100 L Floor Size 1800 x 1770 mm Machine Weight 1700 Kg

209

ID	MA37056
Make	SEIKI
Model	B 65
YOM
Condition	Good Condition
Photo	See Photo
NC Control Seiki-SEICOS L III 5 Axis / 4 axis simultaneous Max. Swing 400 mm Collet Chuck 156 mm Mx. Work Piece length 500 mm Main Axis through whole 78 mm Speed 20~3600 rpm 16 (Random Selection) stations 100~3000 rpm C axis :33.3 rpm Y Axis Travel 80 (+/- 40) mm Turret Type 16 angles , VDI Tool Size (outer x internal) 20x φ25 Travels (XZ) 215x 530 mm B axis Travel/ quick Feed 650 / 24000 mm /rpm Machine Floor 3103 x 2160 mm Machine Weight 5000 kgs Features Chip Conveyer , Bar feed, live tools tools more than around 100

210

ID	MI9586
Make	Ikegai,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
FANUC. 18 T Check Size. 250 Turning Dia. 250 Length.300

211

ID	MI9571
Make	PMT
Model	Supercut 8N
YOM	2017
Condition	Good Condition
Photo	See Photo
A2 6 spindle Chuck dia 200 Between center 700

212

ID	MI9568
Make	Lokesh
Model	TL 200
YOM	2022
Condition	Good Condition
Photo	See Photo
chuck size 200 Control Fanuc TF plus Same Machine 3 Nos Available

213

ID	MA37008
Make	Femco
Model	HL25
YOM	2006
Condition	Good Condition
Photo	See Photo
Cuck size : 8'' Bar Capacity : 51.8 mm Axis : 2 Max. RPM : 4,800 RPM Turning Dia : 250mm Swing : 450 mm Machining Length : 600mm Tailstock : Yes Controller : FANUC Oi- TC

214

ID	MA37007
Make	Doosan
Model	Puma 600 M
YOM	2022
Condition	Good Condition
Photo	See Photo
FEATURES Spindle/plateau diam.: 510 mm Max.swing diam.: 900 mm Distance between centres: 3200 mm Spindle speed: 30 - 1500 rpm CNC: FANUC 21� TB Motor power: 60/75 kw TECHNICAL DATA RAKING BED :45 � X AXIS TRAVEL :470 MM Z AXIS TRAVEL :3250 MM SWING DIAM. OVER BED :1030 MM SWING DIAM. OVER CARRIAGE :800 MM WORKING DIAM. OVER BED :900 MM MAX. WORKING LENGTH :3200 MM MAX. WORKING DIAM. FROM BAR :115 MM MAX. WEIGHT ADMITTED OVERHANG (SELF CENTERING CHUCK WEIGHT INCLUDED) :1600 KG MAX. WEIGHT ADMITTED WITH TAILSTOCK (SELF CENTERING CHUCK WEIGHT INCLUDED): 7300 kg SPINDLE TAPER : ASA A1-15 SPINDLE SPEED: 3 - 1500 RPM N. 03 SPINDLE SPEED RANGE MAX TORQUE: 8803 - 11004 Nm "C" AXIS, POS. 0,001 � ,TRAVEL +/- 360 � LIVE TOOLS: 30 - 3000 RPM LIVE TOOLS MOTOR POWER :7,5/11 KW LIVE TOOLS TORQUE :95 - 140 Nm QUILL DIAM OF TAILSTOCK : 160 MM TRAVEL: 150 MM RAPID FEEDS AXES: X-Z 12/10 MT/MIN STANDARD EQUIPMENT CNCFANUC 21i - TB HYDRAULIC SPINDLE DIAM.510 REST BRANDSMW - AUTOBLOKHYDRAULIC TURRET12 POSTIONBIDIRECTIONAL TYPEBMT - 85 COOLANT SYSTEM HIGH PRESSURE 6 BAR CHIP CONVEYOR PRESETTING TOOL WEIGHT21.500 KG

215

ID	MA37006
Make	Femco
Model	HL45
YOM	2008
Condition	Good Condition
Photo	See Photo
Max. Turning Length : 1000mm Max. Swing Over Bed : 635mm Max. Turning Diameter : 600mm Distance Between Centres : 1000mm Spindle Speed : 2500 RPM Spindle Nose : A2-8 Bar Capacity : 90mm Chuck Diameter : 15'' Number of Stations : 12 Travel X Axis : 285mm/335mm

216

ID	MI9545
Make	Pinacho
Model
YOM
Condition	Good Condition
Photo	See Photo
𝘗𝘪𝘯𝘰𝘤𝘩𝘰 𝘤𝘩𝘶𝘬 250/350 𝘚𝘸𝘪𝘯𝘨 𝘰𝘷𝘦𝘳 400 𝘰𝘷𝘦𝘳 𝘉𝘦𝘵𝘸𝘦𝘦𝘯 1500 𝘊𝘰𝘯𝘵𝘳𝘰𝘭 21𝘵 (2004) 𝘞𝘪𝘵𝘩 𝘴𝘵𝘣𝘭𝘪𝘻𝘳 𝘢𝘶𝘵𝘰 𝘤𝘩𝘪𝘱 𝘤𝘰𝘯𝘷𝘦𝘢𝘳

217

ID	MA37005
Make	Fuji
Model	TN-36
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
- CONTROL : FANUC Oi-TB - Chuck 8 inches / through hole / with tailstock - 10 turrets Two sets available

218

ID	MA37002
Make	MAZAK
Model	GL-400
YOM	2011
Condition	Good Condition
Photo	See Photo
This Multiplex 6300Y comes with a GL400F Gantry,213 PSI Coolant thru,(2) Kitagawa 12" thru hole Chuck and matrix control Specifications Maximum Swing - 16.9" turning Diameter - 16.9" Main Spindle Bore/Max Bar Capacity - 3.46"/3.0" Distance between Spindles - 46.85" X Axis Travel (X1,X2,X3) - 12.2"/ 12.2 Z-Axis Travel (Z1,Z2,Z3) - 23.82/23.82 Y-Axis Travel (Y1,Y2,Y3) - 6 C-Axis Indexing (1,2) - .001 Max Spindle Chuck Size - 10" Main Spindle Chuck Size - Hydraulic Main Spindle Bore Diamter - 3.46" Main Spindle Maximum Bar Work - 3" Main Spindle Speed - 4,000 RPM Main Spindle Horsepower (Cont./30Mins) - 30 Sub Spindle / 2nd Spindle Chuck Size - 10 Sub Spindle / 2nd Spindle Bore Size - 3.46/3.0 Sub Spindle / 2nd Spindle Chuck Type - Hydraulic Number of Turrets - 2 Turret Tool Position 1,2 - 24 Turret Rotary Tool Spindle Speed 1,2 - 4000 Turret Rotary Tool Horse Power 1,2 - 10 Chip Conveyor - Yes Milling Spindle Synchronous Tapping - Yes Tool Eye Automatic Front Spindle - Yes Gantry System - Yes Control - CNC ( Mazatrol Fusion 640T) Dimensions - 153"x 77"x 81" Weight - 18750 lbs Equipped with Mazatrol Matrix GL-400F/ S-Loop

219

ID	MI9531
Make	Ace,India
Model	Super jobber 500LM
YOM	2019
Condition	Good Condition
Photo	See Photo
250 chuck 500 length Fanuc oi TF

220

ID	MA36994
Make	MAZAK
Model	QTN250II
YOM	2008
Condition	Good Condition
Photo	See Photo
Max Swing - 26.57" Z Travel - 20.25" X Travel - 7.5" Machining Length - 19.85" Chuck Size - 10" Chuck Type - Hydraulic Spindle Motor - 3530 hp Spindle Speeds (RPM) 4000 Spindle Bore - 3.46 in Max Bar Capacity - 3" Turret Tool Position - 12 Tail Stock - Yes Chip Conveyor - Yes Control - CNC (Mazatrol Matrix Nexus) Equipped with Mazatrol Nexus CNC Control Chip Conveyor Kitagawa B-210 3 Jaw Chuck

221

ID	MA36987
Make	Okuma
Model	MacTurn 250-W
YOM	2004
Condition	Good Condition
Photo	See Photo \| See Video
Type : Lathes CNC (3 -Axis or more) Model : MacTurn 250-W Brand : Okuma Stock No : 1989 Serial : 105709 Description : Okuma Macturn 250-w cnc 7 Axis Turn Mill Lathe Max Turning Diameter Upper Turret : 21.25 inches Max Swing Diameter Lower Turret : 11.89 Inches Max Swing Upper Turret : 29.5 Inches

222

ID	MI9506
Make	WMW Union
Model
YOM	2007
Condition	Good Condition
Photo	See Photo
PINACHO CNC 1500 CHUCK dIA 1500 X-Z- AXIS TRAVELLS 400MM -1700MM TAILSTOCK MANUAL SPINDLE GEAR TYPE LOW HIGH SPINDLE BORE 80 MM SIDLE BORE 80MM SPINDLE MOTOR 15 KW Gear box with belt drive low gear high gear selection will there

223

ID	MI9502
Make	Batliboi
Model	TC20
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size : 200 mm Turning Length : 500 mm Control Fanuc Machine With Stabilizer

224

ID	MI9501
Make	servo
Model
YOM
Condition	Good Condition
Photo	See Photo
chuck 250 Lenth 300

225

ID	MI9493
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
300 mm Chuck 550 mm turning dia 1500 mm Length Mitsubishi E 70 Control

226

ID	MA36976
Make	Doosan
Model	LYNX220LC
YOM	2018
Condition	Good Condition
Photo	See Photo
MODEL No - LYNX200LC SERIAL No - ML0022-006682 POWER SOURCE - AC380 RATED CAPACITY - 23.68 INTERRUPTION CAPACITY - 5 KA FULL LOAD CURRENT - 35.98 A SHORT CIRCUIT CAPACITY - 10 KA ELECTRIC DRAWING EDITION - L220MNH31VA02 NET WEIGHT - 3100 KGS DATE OF MANUFACTURE - FEBRUARY 2018

227

ID	MI9489
Make
Model
YOM	1991
Condition	Good Condition
Photo	See Photo
Schutte make Multispindle max turn dia 32 and length 100 mm in mint condition available at bengaluru

228

ID	MA36975
Make	Doosan
Model	LYNX220LC
YOM	2018
Condition	Good Condition
Photo	See Photo
Bar Capacity: 2.625" Chuck Size: 6.5" Spindle Speed: 4,000 RPM Max Turning Length: 21" Max Swing: 20.1" Spindle Motor: 20 HP Dimensions: 101" x 63" x 65" Weight: 7,700 LBS Turret Tools: 12 Station Rapid Rate X Axis: 1 IPM Rapid Rate Z Axis: 1 IPM X Axis Travel: 6.9" Z Axis Travel: 21.7" Equipped With: Chip Conveyor Tool Presetter Tailstock

229

ID	MA36974
Make	GILDEMEISTER
Model	CT60
YOM
Condition	Good Condition
Photo	See Photo
Controller NCT104 (Antrieb von Siemens) Siemens Electronic, between centre is 2000 mm Swing Dia Over Bed D600 mm Swing Dia over cross slide 360 mm Turning Length 2000 mm Spindle Bore D107 mm Spindle Speed 16-3500 rpm Turret - 12 fold (VD140) TailStock Morse 5 Power Required 30 kw Weight ca 7500 kgs Accessories 1. Coolant Unit 2. Tail Stock 3. Chip Conveyor 4. 3 jaws chuck 5. Retrofit controller ( ISO Codes,Graphical,USB Slot, usw) 6. Manuals

230

ID	MI9475
Make
Model	LL20TL5
YOM	2008
Condition
Photo	See Photo
LMW LL20TL5 chuck size 200 machine with stabilizer

231

ID	MA36971
Make	MAZAK
Model	Integrex 30
YOM	1997
Condition	Good Condition
Photo	See Photo
Control MAZATROL T PLUS Machine length 6365 mm Machine width 3180 mm Machine Height 2800 mm Weight Of The Machine Ca. 7 t Bar passage 64 mm Max rotation diameter 510 mm Turning Diameter 400 mm Turning Length 1539 mm Spindle power 22-26 kW Spindle Speed Min. 35 RPM Spindle Speed Max. 3500 RPM Rapid Travel Speed X-Axis 12 m / min Rapid Travel Speed Y-Axis 10 m / min Rapid Travel Speed Z-Axis 18 m / min Motor power milling spindle 7,5 kW Max. speed milling head 15-6000 RPM X-axis travel 450 mm Y-axis travel +/- 90 mm Z-axis travel 1539 mm Number of tools in the chain 40 (15 + 25) POS magazine

232

ID	MI9472
Make	Japan
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
MODEL:-WASHINO J5 8 INCH cHECK ,L-450 MM

233

ID	MI9464
Make	GILDEMEISTER
Model
YOM	2008-9
Condition	Good Condition
Photo	See Photo
300/600 XZ TRAVELING A 26SPINDLE SPINDLE BORE 52 MM FANUC CONTROL 8 INCH CHUCKS 4 JAW

234

ID	MI9419
Make	LMW
Model	Smarturn
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck diameter 165mm Siemens 828d controller With Tailstock & stabilizer

235

ID	MI9418
Make	PBR
Model	355
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 630 Chuck bore mm. 260 Bar passage mm. 120 Center distance mm.1500 Cnc ECS Conveyor

236

ID	MI9417
Make	Giana
Model	GFP12
YOM
Condition	Good Condition
Photo	See Photo
Center height mm 560 Swing over bed mm 1120 Center distance mm.1500 Swing over cross slide 700 Chuck dia 650 Automatic turret BARUFFALDI BAN 300 Cnc SIEMENS SINUMERIK Tailstock Conveyor

237

ID	MI9416
Make	WMW
Model	DFS 2/2
YOM
Condition	Good Condition
Photo	See Photo
Max Turning Length: 1230mm Chuck Size: 315mm Swing Dia: 480mm Spindle Bore: 90mm Controller: Siemens 3T

238

ID	MI9413
Make	GMT
Model	S93
YOM	1995
Condition	Good Condition
Photo	See Photo
ABC: 1000mm Spindle Bore: 60mm Chuck Size:250mm Swing Dia:400mm Controller:Fagor Turret:12

239

ID	MI9408
Make	Romi
Model	G50
YOM	2004
Condition	Good Condition
Photo	See Photo
CONTROL - FANUC 21i-T SWING OVER BED - 660 MM MAX. TURNING DIA - 550 MM MAX. TURNING LENGTH - 710 MM X-AXIS TRAVEL (CROSS) - 280 MM Z-AXIS TRAVEL (LONGITUDINAL) - 710 MM HYDRAULIC CHUCK DIAMETER - 400 MM RAPID FEED (X&Z AXIS) - 18 & 24 M/MIN MAX. SPINDLE SPEED - 2000 RPM BAR CAPACITY - 115 MM SPINDLE NOSE - A2-8

240

ID	MI9403
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
RETROFIT FANUC TF CONTROL CHUCK SIZE 12'' DIA 600 MM LENGTH 2 MTR BORE 80 MM

241

ID	MI9395
Make	Daewoo Puma
Model	15
YOM
Condition	Good Condition
Photo	See Photo
BETWEEN CENTRES : 1580 MM SWING OVER BED : 800 MM SWING OVER SADDLE : 540 MM TURNING DIAMETER : 660 MM TURRET : 12 STATIONS SPINDLE SPEED : 2000 RPM SPINDLE BORE : 115 MM SPINDLE NOSE : A2-11

242

ID	MI9385
Make	Giana
Model	610
YOM	2006
Condition	Good Condition
Photo	See Photo
Control Siemens 802d Travel size 300x1500 with tellstock Turn dia 600

243

ID	MI9384
Make	Voest Alpine
Model
YOM
Condition	Good Condition
Photo	See Photo
diameter 600mm length 2000mm machine weight 18 ton

244

ID	MI9380
Make	LMW
Model
YOM
Condition	Good Condition
Photo	See Photo
LMW Smarturn chuck size 165 between centre 300

245

ID	MI9373
Make	Ace,India
Model	SLC16LM
YOM	2019
Condition	Good Condition
Photo	See Photo
SUPPLY WOLT:380V/415V; CONTROL VOLT:24V D.C;BACK UP FUSE:32AMPS; RATED CURRENT:21/19AMPS; KVA RATING:15KVA; SIZE OF WIRE:6 SQ MM Units Values Max.Bar Capacity mm 25 Bore through Spindle : mm 47 Max.Spindle Speed: rpm 4000 Spindle Motor Power_Fanuc : (continuos) kW 5.5

246

ID	MI9349
Make	Galaxy
Model
YOM	2013
Condition	Good Condition
Photo	See Photo
Galaxy 200 chuck 400 length Stebilizer

247

ID	MA36926
Make	Doosan
Model	2100LB
YOM	2016
Condition	Good Condition
Photo	See Photo
Control: Doosan-Fanuc OITf Spindle bore; 65mm E 185 Long Nose collet chuck 5C collet chuck 8'' 3 jaw chuck Tailstock Probe Parts catcher Swarf conveyor Machine weight: 2950 kg

248

ID	MI9315
Make	Femco
Model	WNCL35
YOM
Condition	Good Condition
Photo	See Photo
Length-1000 Max turning length-800 Turning Dia-550-600 Chuck-305 Fanuck Control Chip conveyor transformer Turret-12 station Spindle bore-80 dia

249

ID	MA36923
Make	Daewoo Puma
Model	PUMAMX2500ST
YOM	2005
Condition	Good Condition
Photo	See Photo
"Used 2005 DAEWOO PUMA MX2500 Multi-Axis CNC Turning Center for sale by Silverlight CNC, Inc. This 6-axis machine offers a 40.15" machining length, 15" chuck size, and 3" bar capacity. With a powerful 35 hp motor and max RPM of 3,500, it's perfect for precision turning. Trust Silverlight CNC, Inc for top-quality used equipment. Get engaged with this professional and honest listing today!"

250

ID	MA36922
Make	Okuma
Model
YOM
Condition
Photo	See Photo
OSP-E100L CNC Control,12000 RPM Pendulum Milling Head,Powerful (22kw) 30 HP high-torque integral spindle motors,High speed 5,000 RPM spindles,Servo driven 40 station ATC with 1.8 sec tool to tool time,Servo Controlled Full C-Axis on Both Spindles,12 Station lower turret with Live tool capability,Y Axis Capability,PCMCIA Card Slot,Tool monitoring system � wear and breakage detection,Automated Parts Unloading system,Collet Chuck on Main Spindle,Collet Chuck on Sub Spindle,Rigid Tapping on Both Spindles,Foot Operated Control for Chuck,High Pressure Coolant System,Chip Conveyor,Inbuilt Transformer,Chiller Unit,Comes with Tools, Chip Conveyor, Books & Manuals.

251

ID	MA36921
Make	Okuma
Model	2SP-150H
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
EQUIPPED WITH Work Stocker unit with full set of original 16 mandrels and pallets. including light bars on side. Gantry Loader Loader teach pendant (2) part rotators Hydraulic & pneumatic system Chuck miss detection, left & Right Transformer Coolant Tank And Pumps SPECIFICATIONS Swing: 5.91'' Machining Length: 3.15'' Axis: 4 Bar Capacity: 1.65'' Max. Turning Dimension: 5.91'' Power: 15Hp Max. RPM: 4,500 RPM Live Tooling : Yes of Turrets: 2 Control: CNC (OSP-P200L) Dimensions: 1,850mm x 2,150mm x 2,593mm (102'') Weight: 12000

252

ID	MI9303
Make	Femco
Model	FL75
YOM	2000
Condition	Good Condition
Photo	See Photo
Fanuc OTF Turning Dia-610mm Turning Length- 1500mm Hydraulic Chuck Dia-18 Inch Bore Dia-117mm 12 Station Hydraulic Turret Hydraulic Tailstock With Hydraulic forward And Reverse Function With chipconveyor and coolant pump

253

ID	MA36912
Make	Colchester
Model	2000L
YOM	1990
Condition	Good Condition
Photo	See Photo
Control: Fanuc OT, Maximum turning diameter: 15", Distance between centres: 40", Spindle speeds: 20 - 2750 rpm, 8 station turret, 3 Jaw Chuck, Tailstock, Coolant, Interlocking guards.

254

ID	MA36910
Make	Hitachi Seiki
Model	HICELL23II
YOM	1999
Condition	Good Condition
Photo	See Photo
Control: Fanuc / Seicos 18, Maximum bar capacity: 65 mm, Maximum turning diameter: 260 mm, Maximum turning length: 500 mm, Turret: 14 station, Collet chuck, Parts catcher, Tool setting eye, Swarf Conveyor, C/W Driven and Static Tool Holders, Multifeed short length magazine bar feed.

255

ID	MA36906
Make	Mazak,Japan
Model	SQT-100M
YOM	2006
Condition	Good Condition
Photo	See Photo
6 inch with tale stock, Milling function on tarret

256

ID	MI9290
Make	Leadwell,Taiwan
Model	LTC-10
YOM
Condition	Good Condition
Photo	See Photo
TURNING DIAMETER 160MM CHUCK DIAMETER 400MM SWING 180MM TURNING LENGTH 500MM CONTROL FANUC OT TOTAL POWER REQUIREMENT 7KW WEIGHT OF THE MACINE CA. 2500KG DIMENSION OF THE MACHINE CA. 1800MM X 1400MM X 1100MM

257

ID	MA36891
Make	Everox
Model	DL720 x 1100
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
swing over Bed : 720mm swing over cross slide : 460mm swing over Gap:900mm Distance between centers :1100 x 1600 x2100 Widtd of bed :410mm Spindle Bore: Dia 83mm/105/130/160 Spindle nose :A-8 No of spindle :3 Cross travel: x axis :450mm No.of tools : H4/V8 Tailstock taper :MT#5 Controller Fanuc

258

ID	MA36889
Make	DMG
Model	DMC-60FD Duo Block
YOM	2010
Condition	Excellent
Photo	See Photo
DMG Universal Mill-Turn Center DMC-60FD duoBLOCK Year 2010 Table size:600mm Travel X600 Y700 Z600mm Spindle 12,000rpm HSK-A63, 60 magazine Universal B axis with NC Control NC Mill-Turn table with Pallet Change Internal Spindle Through Coolant 40 bar Change Conveyor Rotating Clear View-Window Siemens 840D SL FD Control Infrared measuring Probe Heidenhain TS649 Combination tool measuring in machining area Cr3b2ocuws -Blum Laser ControlNT-H 3D -Automatic retaction of measuring device Spindle Diagnosis system - Vibration sensor Spray Pistol with Pump Cooling by Air blast thru' spindle by M code Electronic handwheel TRANSMIT Lateral Surface Transformation (milling of tool paths on cylindrical surfaces � TRACYL) Safety package for power failure ONLY 1,411 spindle Hours - Used By School Guarantee Operational

259

ID	MA36880
Make	Muratec
Model	MJ-60
YOM	2015
Condition	Good Condition
Photo	See Photo
Maximum spindle speed :4500 Gantry Holding Capacity Dia 30mm x 145mm Hydraulic actuated Tailstock. Maximum Chuck Size 210 mm Maximum Part Length 145 mm Number of Turret Stations 8 STA Maximum Spindle Speed 4500 rpm Spindle Drive Motor 11 kW Total Machine Weight (Approx.) 3600 kg Tailstock Taper No. MT4 Gantry Loader Workpiece Handling Capacity Φ30 mm x 145 mm , up to 1.0kg/piece Spindle Nose Size JIS A2-5 Spec. of Axes X-axis 24 m/min \| Z-axis 24 m/min

260

ID	MA36874
Make	DMG MORI
Model	DMU 65 Monoblock
YOM	2014
Condition	Good Condition
Photo	See Photo
CNC Machining Center 5 axis X axis travel :735mm Y axis travel : 650mm Z axis travel : 560mm B axis travel :A=120/-120 C axis travel : C360 Control :Heidenhain ITNC 530 3-D Spindle speed :10,000 min/-1 Number of Tools :120 Tool Holder :HSK-63 Machine size :2.46 x 3.06 x 2.90 meter Electric Power : 53 KW Internaling Cooling ; available chip Conveyor : Available Paper filter :Available Maximum Workpiece weight : 1000 Kgs Machine weight : 12700 Kgs.

261

ID	MA36868
Make	MAZAK
Model	Integrex 200III-ST
YOM	2003
Condition	Good Condition
Photo	See Photo
MAZATROL FUSION 640MT PRO CNC CONTROL MACHINE WEIGHT 10.550 Kg MACHINE DIMENSIONS WITH CONVEYOR Length: 3,820mm Width 2,212mm Height 2,600mm Capacity Max rotating diameter on the bench � 660mm Max rotating diameter on upper turret carriage / turret inf. �660mm / �500mm Max upper turret turning diameter / lower turret �660mm / �260mm Max turning length 1.016 mm Main spindle bar passage diameter / counter-spindle � 65 mm / � 65 mm Max workpiece weight on self-centering main spindle / counter-spindle 300 Kg / 300 Kg Racing X1 axis 580mm X2 axis 150mm Z1 axis 1,045mm Z2 axis 990mm Y axis 160mm W axis 1,050 mm C axis (main spindle / counter spindle rotation) �360� / �360� Main Spindle Collet holder type BELLEGRANDI MSCTN70-A6� Spindle speed 35 � 5,000 rpm Spindle nose ASA A2-6 Spindle motor power (cont/30 min) 15/22 kW C axis angular positioning spindle + axis equipped hydraulic clamping force 0.001�

262

ID	MA36863
Make	Doosan
Model	PUMA 700LY
YOM
Condition	Good Condition
Photo	See Photo
CAPACITY Rotating diameter on the bench mm:1140 Max. turning diameter mm:750 Max. turning length mm : 3250 [5050] Max. turning diameter from bar mm :164 Y axis Stroke mm : 200 (+-100) SPINDLE (COUNTER SPINDLE) ASA attack : A1-15 Rotation speed rpm : 1500 AC motor power : (cont./30min.) kW 37/45 [Opt. 60/75] TURRET : No. of tools (motorised) no. 12 (12) Motorized power kW/30min. 11 Machine can be Inspected under Power

263

ID	MI9255
Make	MAZAK
Model	Integrex 30
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
Mazatrol T � Plus control 315mm power chuck 1540mm between centres 510mm max swing 400mm swing over cross slide 90mm spindle bore 80mm bar capacity Y axis C axis and driven tools Cat 40 tooling 20 station ATC Tool prestter Tailstock Swarf conveyor Manuals

264

ID	MI9240
Make	Perfect
Model
YOM
Condition	Good Condition
Photo	See Photo
Available 300 Chuck Dia Turning Center. 1Mtr Length 2019 Latest System Fanuc OITF Hydraulic Tail Stock Hydraulic Chip Conveyor New Heavy Pragati Turret Heavy Solid Machine A211 Spindle Spindle Bore 78 Machine In " A" Class Condition

265

ID	MI9237
Make	Manford STM
Model	MSL300
YOM	2020
Condition	Good Condition
Photo	See Photo
Fanuc series OiTF Chuck diameter 300mm Turning length 600mm With Tailstock & Chip Conveyor

266

ID	MA36838
Make	Nakamura Tome,Japan
Model	TW20
YOM	2003
Condition	Good Condition
Photo	See Photo
Control Unit : Nakamura Tome Luck-Bei Number of Spindle:2 Number of Axis :2 Work Piece X:500mm Work Piece Z:600mm MAX BAR SIZE 51 MM - CHUCK DIAMETER 215 MM - SWING OVER SLIDE COVER 270 MM - STANDARD TURNING DIAMETER 215 MM - MAX. TURNING DIAMETER 270 MM - MAX. TURNING LENGTH 192 MM QUALITATIVE MACHINE BENEFITS: - ROBOT WITHOUT CONSOLE

267

ID	MA36837
Make	Haas
Model	ST-30
YOM	2019
Condition	Good Condition
Photo	See Photo
Spindle Speed range:3400 1/min Number of Axis:2 Slots in storage:12 Bar passage:76mm Inner Diameter of spindle:88.9mm Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 40 HP X Axis Travel: 12.5" Z Axis Travel: 26" Rapid Rate Z Axis: 945 IPM Turret Tools: 12 Station Rapid Rate X Axis: 945 IPM Max Turning Dia: 21" Max Turning Length: 26" Max Swing: 31" Max Thrust X 4100 lbf Max Thrust Z 5100 lbf Spindle Nose A2-8 Max Torque 300 ft-lbf Spindle Bore 3.5" Coolant Cap 55 gal Weight: 14,300 LBS Options: HAAS CNC Control Tool Presetter Tailstock

268

ID	MA36831
Make	Muratec
Model	MW120
YOM	2004
Condition	Good Condition
Photo	See Photo
Chuck diameter : 165mm x 2 - Max turning diameter : 240mm - Max turning length : 145 mm - Distance between the 2 spindles : 340 mm - Spindle nose : A2-5 - Spindle bore : 47 mm - Spindle power : 11 kW - Spindle speed : 4500 rpm - 2 Turrets 8 stations - Axis strokes : X: 130 mm - Z: 145 mm EQUIPMENT Equipped with : - 1 CN FANUC - 1 Parts evacuation mat - 1 Chip conveyor

269

ID	MA36829
Make	Muratec
Model	MW100
YOM
Condition	excellent working condition
Photo	See Photo
Distance Between Spindles: 13.4" Max. Swing: 9" Max. Chuck Size (Both Spindles): 6" Max. Cutting Diameter: 6.6" Max. Length: 3.1" Max. Spindle Speed: 4500 RPM Spindle Motor (30 Min. Rating): 7.4 HP Spindle Nose: JIS A2-5 Gantry Handling Capacity: 2.36" x 1.57" Gripper Outer Diameter: 1.85" Jaw Stroke (Range): 0.47" X-Axis Stroke: 5.1" Z-Axis Stroke: 4.3" Equipped With: Fanuc 30i-A CNC Control (2) 8-Position Turrets (2) Spindles Tool Monitor Chip Conveyor Mist Collector Dimensions & Weight: Call Perfection Global for Dimensions, 8000 Lbs 3 Machines

270

ID	MA36788
Make	Muratec
Model	MW120
YOM	2011
Condition	excellent working condition
Photo	See Photo
TwDistance between spindles 340 mm Max Swing 295 mm chuck size 205 mm Max diameter w/ Loader 120 mm Max diameter without Loader 230 mm Number of turret stations 8 Stroke - X-axis radius 130 mm - Z-axis 145 mm Rapid Traverse rate X-axis 24 m/min Z-axis 24 m/min Max spindle speed 4500 rpm Standard tools - Shank size OD tools 20 mm - Max shank diam boring bar 40 mm Machine weight 4400 kg Machine foot print Length x width 1900 mm X 1760 mm Machine is equipped with the following: Muratec / Fanuc pendant controller Single Gantry style machines Part stacker loader to feed gantry chip conveyors ( must confirm as not in photos) Books and Manuals- Spindle CNC Turning Machine

271

ID	MA36787
Make	Muratec
Model	MW120
YOM	2015
Condition	Good Condition
Photo	See Photo
CNC Control yes CNC Control Fanuc/Muratec # Axis 4 Swing 304.80 mm Turning Diameter 203.20 mm Chuck Size 203.20 mm X Axis Travel : 130.05 mm Z Axis Travel : 144.78 mm Spindle Nose : A2-5 Spindle Speed : 4,500 rpm Main Motor : 10 hp Sub Spindle yes Turret Capacity : 8 Stations x2 Turrets Machine Weight : 4,535.92 kg EQUIPPED WITH - Fanuc/Muratec CNC Control - Collet Chuck Currently Installed (8" Chuck Capacity) - Twin Spindle - Dual 8 Position Turrets - Gantry Loading System - (2) 2-Axis Robots - Rear Discharge Chip Conveyor - Max Capacity of Gantry 6.6 Lbs/ Part

272

ID	MI9221
Make	Femco
Model	35
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 315 mm Spindle A2-11 Spindle 22 kW Fanuc o t alpha series Turning diameter 380 mm Swing over bed 550 mm Turning length 700 mm Good running condition Direct imported piece For sale

273

ID	MA36784
Make	Muratec
Model	MW200
YOM	2002-2005
Condition	Good Condition
Photo	See Photo
Chuck Diameter x 2 10� Max. Work Diameter 14.9� Max. Turning Diameter 13.78� Max. Turning Length 5.51� Spindle RPM Range 24-3500 Spindle Nose A2-6 Spindle HP Each 30 HP Spindle Bore 2.48� Turret Positions x 2 10 Tool Shank Sizes 1.57� rd, 1.00� sq. X1 & X2 Travels 7.48� Z1 & Z2 Travels 7.48� Machine L x WH 93� x 93� x 83� Machine Weight 15,400 lbs Equipped With: High Speed Gantry Loader 2 x Coolant systems Rear Discharge Chip Conveyor Hydraulic Chuck Cylinders (need to confirm) Program Select Switch Work Clamp Confirmation � Both Sides 6 Machines

274

ID	MA36783
Make	Muratec
Model	MW200
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuck Diameter x 2 10� Max. Work Diameter 14.9� Max. Turning Diameter 13.78� Max. Turning Length 5.51� Spindle RPM Range 24-3500 Spindle Nose A2-6 Spindle HP Each 30 HP Spindle Bore 2.48� Turret Positions x 2 10 Tool Shank Sizes 1.57� rd, 1.00� sq. X1 & X2 Travels 7.48� Z1 & Z2 Travels 7.48� Machine L x WH 93� x 93� x 83� Machine Weight 15,400 lbs Equipped With: High Speed Gantry Loader 2 x Coolant systems Rear Discharge Chip Conveyor Hydraulic Chuck Cylinders (need to confirm) Program Select Switch Work Clamp Confirmation � Both Sides 3 Machines.

275

ID	MA36782
Make	Muratec
Model	ML400G
YOM	2011
Condition	Good Condition
Photo	See Photo
machine catalog specifications: Maximum swing 340 mm Chuck Size 6/8 inches 165mm/ 205mm Spindle AC motor 15 kw (option) Maximum cutting diameter : - with loader 200mm - without loader 200mm Maximum part length: - with loader 390mm - without loader 400mm number of turret positions 6 x axis stroke 130mm Z axis stroke 430mm Quill axis stroke 300mm rapid traverse x-axis 20 m/min rapid traverse z-axis 32 m/min rapid traverse Quill axis 20 m/min Maximum spindle speed 45-4500 rpm standard byte tools 20mm Max diameter boring bars 32mm Max weight of part in loader 10 kg Machine weight with loader tools 4500 kg Machine floor space w/gantry 3280 mm width x 1650 depth Machine height w/ gantry 3300 mm Machines are equipped with the following: Fanuc controls Heavy duty optional 15 kw spindle motor tailstock option (MT4 Rolling center) single station single turret Manual load holding fixture gantry loaders chip conveyors w/ coolant tank Books and manuals 2 machines

276

ID	MA36781
Make	Muratec
Model	MW 80
YOM	2014
Condition	Good Condition
Photo	See Photo
Maximum Chuck Size 6" 3-Jaw Standard - CNC Collet Chucks on Stock Machine Installed. Number of Turret Stations Tool Plate x 2, Width: 14.57 in Maximum Spindle Speed 6000 rpm Spindle Drive Motor 7.5 kW /30 min 10 Hp. Total Machine Weight (Approx.) 8818 Lbs. Gantry Loader Workpiece Handling Capacity Φ80 mm x 50 mm , up to 0.5kg/piece Spindle Nose Size Flat nose Spec. of Axes X-axis 18 m/min \| Z-axis 18 m/min

277

ID	MA36774
Make	Hardinge (Taiwan)
Model	250
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control : Fanuc oi TD Max. turning diameter 380 mm Max. swing diameter 695 mm Distance between jaws 539,5 mm Max. bar capacity 80 mm movements X/Y/Z/W 234/100/625/585 mm main spindle 26/22 kW main spindle max. speed 4.000 rpm spindle nose A2-8 sub spindle 11/7,5 kW sub spindle max. speed 6.000 rpm spindle nose A2-5 12-station turret 12 driven tool stations, 5,5 kW Driven tools max. speed 5.000 rpm

278

ID	MA36773
Make	Muratec
Model	MJ200G
YOM	2006
Condition	Good Condition
Photo	See Photo
Chuck size Dia 254 mm (10") Starndard work size Dia 150 mm x L 200 mm Maximum work size (Option) Dia 150 mm s L 250 mm Number of turrets 2 Number of turret stations 10 Standard OD tool shank size 25 mm Standard ID tool shank diameter Dia 40 mm Axis stroke X - 190mm Z -270mm rapid travarse rate X/Z 24m/min Spindle ID of spindle bearing Dia 110 mm Diameter of spindle bore dia 73mm Spindle nose JIS Z2-6 Spindle motor capacity 15 kW/30mm Spindle speed 35-3500RPM (Option 24-240 RPM) Tallstock servo & hydraulic controlled MT No.5 Tallstock vertical stroke 110 mm (Hydraulic) Machine floor size 1920mm x 2330 mm Machine weight approx. 5500 Kg CNC control

279

ID	MI9207
Make	Jyoti
Model	DX-200
YOM	2012
Condition	Good Condition
Photo	See Photo
chuck : 200mm length : 500mm control : siemens 828

280

ID	MI9203
Make	Ace,India
Model	vintage 800
YOM	2017
Condition	Good Condition
Photo	See Photo
Control - fanuc oi- Tf Chuck size - 315mm Max turning length - 750mm Spindle bore - A2-8 Max turning dia - 510mm 8 station pragati turret

281

ID	MI9201
Make	Jyoti
Model	DX350
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck Size : 380mm Spindle : A2-11 Turning Length :1000mm Turning Dia : 680mm Control : Siemens 828D

282

ID	MI9200
Make	Ace jobber
Model
YOM	2011
Condition	Good Condition
Photo	See Photo
Machine: ace super jobber 500 Controller: Fanuc Chuck:200 Length:500 With sterilizer

283

ID	MI9199
Make	Jyoti
Model	DX200
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuck Dia : 200mm Length: 500mm Control:Fanuc series Oi Mate-TD

284

ID	MI9197
Make	Ikegai,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
WITH GEAR HEAD SPINDLE Max turning dia :- 400 mm Max turning Length:-600 mm Speed range:- 50-2500 RPM Max Bar Capacity :- 62 Control System:- FANUC OT

285

ID	MI9189
Make	Femco
Model	35
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 315 mm Spindle A2-11 Spindle 22 kW Fanuc o t alpha series Turning diameter 380 mm Swing over bed 550 mm Turning length 700 mm

286

ID	MI9181
Make	sands
Model
YOM
Condition	Good Condition
Photo	See Photo
chuck :200mm Length :400mm Control :Fanuc without tail stock with Stabilizer 2 machines Available

287

ID	MI9179
Make	Jyoti
Model	DX200
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size - 200 Turning length - 500mm Spindle size - A2-6 Control - Siemens 802d

288

ID	MI9170
Make	Global
Model	sinway2035
YOM	2019
Condition	Good Condition
Photo	See Photo \| See Video
Chuck 200 Length 300 With tailstock With stebilizer 2019 model Fanuc oi tf

289

ID	MA36718
Make	Okuma
Model	LFS10-2SP
YOM
Condition	Good Condition
Photo	See Photo
Swing: 8.6� Max. turning diameter with loader: 4.72� x 3.15� thick Max. turning diameter w/o loader: 8.66� Max. turning length: 3.9� Spindle bore: 2.1� Spindle RPM: 50-6,000 Spindle HP: 10/7.5 X travel: 5.12� Z travel: 5.7� 2) Eight position turrets Turret index time: 0.3 sec, non lifting OD turret tool size: .750� ID turning tool size: 1.250� Rapid traverse rates: 945 ipm in X & Z Feed rates: 0.0001-39.37 ipm Wired: 240V KVA rating: 26 Dimensions with loader: 108� x 75� (112� with chip conveyor) 98.43� high x 10,584 lbs. EQUIPPED WITH: Okuma OSP-U100L controls with 9.5� TFT color display, Mirror image, Graphic tool path plus tool animation, absolute position encoders, torque limiter machine protection, stroke compensation, 1050 feet of storage, inch/metric, on screen program & alarm help, MacMan machine utilization reporting, User Task I+II w200 common variables, LAP4 Auto Turn thread groove drill, Mid-Auto Manual function, 3.5� Floppy, RS232C port and Integral hand held remote & Teach pendant for gantry & loader systems Two Kitagawa Md. B206 3-jaw chucks Nice compliment of turret tool holders including what is already in the turrets plus 13) additional OD/ID/Universal tool holders, bushings, replacement jaws for grippers in different sizes, stick tools, chuck jaws,and an Okuma tool box kit. Enomoto rear discharge chip conveyor

290

ID	MA36716
Make	Index
Model	V200T
YOM	1997
Condition	Good Condition
Photo	See Photo
Double Spindle CNC Lathe Shaft Strokes (X/Y/Z) : 520/120/200mm Thrust Force (X/Y/Z) :5000(N) Fast Advances (X/Y/Z) :30/7.5/30 m/min Spindle reassemble Diameter : 30mm Speed n Maxi :7500 rev/min Max Diameter. mandrel :140mm ISO 702/1 Spindle Nose-Size :A4 Rotary Diameter when palleting before :75mm Table Dimension Length x Height : 1054 x 400mm CNC Control : SIEMENS SINUMERIK 840-C Auto Loader/Lubrication Equipment with Pump Weight of the Machine :9500kgs

291

ID	MA36714
Make	Gildemeister,Germany
Model	Twin 32
YOM	2001
Condition	Good Condition
Photo	See Photo
Turning-milling Center with 8-axis(X1:220mm, Z1:320mm, X2:120mm, Z2:340mm, Z3:380mm, C1,C2,Y-axis) Bar Material dia :36mm Chuck Diameter :100mm Turning Length :580mm Greater pass round over bed :145mm Turning Diameter:100mm Turning speeds:2x25-8.000 1/min Positive location each:2xC-Achse.0.001 Grad Sub Spindle:ja/yes Turret(x-stations) :2x12-fach VDI25 Driven Tools :2x12 Turning speed :31-6.300 1/min Control: Sinumerik 840D Total Power requirement:50 KVA Weight of machine:6 Tons High Pressure Pump: 20bar Tailstock on right side collet device chip conveyor

292

ID	MA36710
Make	Muratec
Model	MW120
YOM	2005
Condition	Excellent
Photo	See Photo
CNC Twin Spindle turning center. Chuck Size: 6" (152.4mm) Spindle Type; Twin X- axis Travel : 24m/min Z-axis Travel : 24m/min Tools:8 x 2 Spindle Motor :4500 rpm Spindle Nose: JIS A2-5 Refrence No: 3639478

293

ID	MA36709
Make	Muratec
Model	MW120
YOM	2005
Condition	Excellent
Photo	See Photo
Twin Spindle CNC Turning Machines Distance between spindles :340mm Max Swing :295mm Chuck Size : 205mm Max Diameter w/Loader :120mm Max Diameter without Loader :230mm Number of Turret Stations :8 Stroke- X-axis radius 130mm Z-axis :145mm Rapid Traverse rate X-axis 24m/min Z-axis 24m/min Max spindle speed :4500rpm Standard Tools-Shank size OD Tools :20mm Max shank diam boring bar:40mm machine weight :4400kg Controller: Fanuc pendant (2) 8" Diameter Howa Chucks Model:H011MBB Single Gantry Style machines Chip Conveyors Gantry Load & Unload software package and wiring, Books and manuals 2 machines Available.

294

ID	MA36708
Make	Goodway
Model	GLS-200M
YOM	2014 and 2016
Condition	Good Condition
Photo	See Photo \| See Video
X axis : 220mm Z axis : 600mm ATC tools :10unit Tool change : 0.20sec Machine Weight : 3200kg Machine Width : 1.49m Machine Lenght : 2.26m Machine Height : 1.675m Coolent Tank : 120L Max Speed : 4200rpm Power : 11kw Hole Through : 66mm Rapid Feed x : 24 m/min Rapid Feed z : 10m/min swing over bed : 500mm Max Turning Diameter : 400mm Max Turning lenght : 500 Fanuc Oi-Ma

295

ID	MA36707
Make	Muratec
Model	MW100
YOM	2013
Condition	Excellent
Photo	See Photo
Twin Spindle CNC Turning center Distance Between Spindles : 340.36mm Max Swing : 228.60mm Max Chuck Size :(Both Spindles) :152.40mm Max Cutting Diameter :167.64mm Max Length :78.74mm Max Spindle Speed :4500 RPM Spindle Motor (30 min.Rating) :5.52KW Spindle Nose : JIS A2-5 Gantry Handling Capacity : 59.94mm x 39.88mm Gripper Outer Diameter : 46.99mm Jaw Stroke (Range) :11.94mm X-axis Stroke :129.54mm Z-axis Stroke :109.22mm X,Z-axis Rapid Feed rate : 399.63mm/sec Equipped with: CNC Control : Fanuc 30i-A (2) 8-Positions Turrets (2) Spindles Tool Monitor Chip Conveyor Mist Collector Approx weight :3628KG 3 Machines Available

296

ID	MI9155
Make	Leadwell,Taiwan
Model	LTC50CXL
YOM
Condition	Good Condition
Photo	See Photo
Max. swing mm(in): 850 (33.46) Max. turning diameter mm(in): 800 (31.5) Max. turning length mm(in): 3006 (118.3) Bar capacity mm(in): 117 (4.6) X axis travel mm(in): 400+25 (15.7+1) Z axis travel mm(in): 3100 (122) Spindle speed rpm: 15-1500 Chuck size mm(in): 381 (15)/457 (18) Spindle nose: A2-11 Number of tool stations pcs: 12 Shank height for square tool mm(in): 32 (1.26) Shank diameter of boring bar mm(in): 50 (1.9) X axis rapid traverse m/min(ipm): 10 (393.7) Z axis rapid traverse m/min(ipm): 12 (472.4) X/Z/ axis motor kw (hp): 4/7 (5.4/9.4) Machine size (LxWxH) mm: 6596x2575x2426 Machine weight kg: 20000

297

ID	MI9151
Make	Cincinnati
Model	CINTURN 15U
YOM	2002
Condition	Good Condition
Photo	See Photo
Control : Fanuc 18i-t Condition : working Chuck Size: 15 inch Swing Over Bed: 28� (710mm) Max turning length: 100� (2540mm) Turning Dia : 18 inch (457 mm ) Spindle Hole: 4� (100mm) Turret: 7 Position with 7 Position OD Crown Power Requirement: 25HP Equipped with: Heavy Duty Slant Bed Construction Hydraulic T ailstock Steady Rest ( qty -2 nos.) Chip Conveyer

298

ID	MA36699
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
Maximum Job Length : 1500mm Maximum Turning Dia :550mm maximum Diameter over Bed : 280mm Three Jaw Chuck Diameter :300mm Maximum workpiece weight : T.2 Diameter of Throat : 70mm Height Centers above above Bed: 170mm Width of Bed :435mm Hydraulic Tailstock Two Turrets : One Front Horizontal axis for 8 Tools external-One back turret for 6 Tools Internal With Fixed steady coolant with electric.

299

ID	MA36697
Make	Biglia
Model	B131
YOM
Condition	Good Condition
Photo	See Photo
Spindle Diameter :50mm Turning Length :300mm 3 Jawed spindle diameter: 200mm Center Height :100mm Control : Fanuc: OT

300

ID	MA36696
Make	Okuma
Model	LH35N
YOM
Condition	Good Condition
Photo	See Photo
Center Height :320 x 1500mm With Tailstock : Hydraulic Turret in Vertical Axis for 6 Tools Chuck Diameter: 370mm Hydraulic closure CNC Controller : OSP 3000 Coolant Tank Chip Conveyor

301

ID	MA36695
Make	Miyano
Model	BNC-12
YOM
Condition	Good Condition
Photo	See Photo
Tailstock Distance : 150mm Turret for six stations with Toolbar with opposite pliers One Planter CNC Control : Fanuc 10T

302

ID	MA36694
Make	Vega
Model
YOM
Condition	Good Condition
Photo	See Photo
CNC Control: AB OSAI 8600 Max swing :800mm max Inside Turning Dia with boring Bar: 670mm max Outside Turning Dia with Outside Tool: 260mm Max Recomended Dia :350mm Max Turning Length in front of chuck jaws :600mm Tailstock : Max distance between centers :750mm Quill Dia :80mm Quill Travel :150mm Morse Taper : N.5 Max Thrust at 20 Bar: daN 100 Min Thrust at 5 Bar : daN

303

ID	MA36693
Make	MAZAK
Model	Quick Slant20
YOM
Condition	Good Condition
Photo	See Photo
4 Axis Working Length : 600mm Spindle Diameter : 200mm N.2 Tool Holder Turrets with 8+8 Tools Max RPM : 4000 Weight of the Machine :3400kgs CNC Control : Mazatrol CAM T-4 The machine has Loader SAM ECA Model: MONOSAM 65

304

ID	MA36689
Make	Hitachi Seiki
Model	HT20
YOM
Condition	Good Condition
Photo	See Photo
Thru Spindle Diameter : 35mm Machine with Presetting Chuck Dia :160mm Turret : 12 Tools CNC Controller : Jasnac LX2 Complete of Tank with chip conveyor LNS Pie Hydrobar with Central and two Plant With Transformer with tailstock(Distance center 500mm)

305

ID	MA36687
Make	Okuma
Model	LC20
YOM
Condition	Good Condition
Photo	See Photo
4 Axis Axis C for Live Tools One Turreth for 8 Stations Internal-External and Live tools With Tailstock Distance between center: 700mm Chuck with 3 Jaws Diameter: 210mm Spindle Hole Dia :40mm Automatic Bar loader with Magazine:PF-V3 Chip Conveyor CNC Controller : OSP 5000

306

ID	MA36683
Make	MAZAK
Model	QT300/1250U
YOM	2015
Condition	Good Condition
Photo	See Photo
Control: mazatrol Matrix max swing : 720mm Max Machining Dia :420mm Max Bar Capa :80mm Max machining Length:1282mm Chuck Dia :10" (254mm) Spindle :4000 RPM Turret : 12 Tools Travel X : 240mm Z :1314mm

307

ID	MA36682
Make	MAZAK
Model	QT35N/1000U
YOM	1992
Condition	Good Condition
Photo	See Photo
Control: T32-2 Max swing :500mm Max machining Dia:400mm Max Bar Capa :114mm Max machining Length:1000mm Chuck Size: 308mm Spindle : 3000 RPM Turret :12 Tools Travel X-280mm Z=1000mm

308

ID	MI9135
Make	Then Uing Enterprise,Taiwan
Model	460CNC
YOM
Condition	Excellent condition,under power
Photo	See Photo
Control: Mitsubishi M70 Chuck Size: 300mm. Amit Between center: 1500mm With accessories

309

ID	MI9128
Make	Takisawa,Japan
Model	TC20
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck : 200mm Length : 350mm Control :Mitsubishi e70 with servo Turret. Mc 2000 System new 2021

310

ID	MI9122
Make	Jobber XL
Model
YOM	2021
Condition	Good Condition
Photo	See Photo \| See Video
Chuck : 200mm Length:400mm

311

ID	MA36668
Make	MAZAK
Model	QTC200MSYL
YOM	2017
Condition	Good Condition
Photo	See Photo
Three axes travel 215100615mm Maximum rotating diameter 695 mm Maximum machining diameter 340mm Maximum bar machining capacity (subject to chuck): 65 mm Chuck size: 8/6 inches. Maximum spindle speed: 5000 rpm Spindle motor power (rated for 30 minutes) : 15 kw/20.0hp Maximum sub spindle speed : 6000 rpm Sub spindle motor power (rated for 30 minutes): 8 kw/10.0hp Number of tools : 12 Maximum upper turret speed : 4500 rpm Upper turret motor power (rated for 30 minutes): 5 kw/7.5 hp

312

ID	MA36666
Make	Tacchi
Model	HD1200
YOM	1993
Condition	Good Condition
Photo	See Photo
CNC horizontal lathe Flat Bed CNC Lathe Spindle speed (3 ranges) 3 to 1000 rpm Chuck 3 concentric jaws diam 800 mm Maximum machinable diameter 850 mm Max diameter above the bench 1200 mm

313

ID	MA36660
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Lathe CNC Total :8 Units 1) Make: Miyano = 2 Units Control: Fanuc fs 21T without tailstock Chuck : 6" (152.4mm) 2) Make : Takisawa = 4 Units Control : Fanuc 21 i Chuck : 6" Without Tailstock 3) Make : Tongtai = 2 Units Control : Fanuc OT Chuck : 8" With Tailstock.

314

ID	MI9100
Make	Yantrang
Model
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck Dia:200mm Height:300mm

315

ID	MA36651
Make	Voest Alpine
Model	M70 x3000
YOM	1998
Condition	Excellent condition,under power
Photo	See Photo
Machine with Boring Bar Changer. Swing over Bed :750mm Swing over Slide : 670mm Turning Circle Tools :730mm Double Cross Slide Top 6-axes Z1 axes : 3670mm X : 660mm E :660mm Cross Slide Below 2 axes: Longitudinal : 2450mm Plane : 250mm Dist. between centers : 3000mm spindle speed : min-1 3150 spindle Diameter v.Bearing : 160mm Spindle Diameter Bore:106mm spindle Head: DIN 55026 A 11 Total Power : 63KW Maximum Torque spindle :2385 Nm Speed Range : 10-3150 1/min Feed Force : 30000 N langs/longitudinal, 31500 N plan Feed : 5000mm/min Rapid : 10000mm/min Disk turret : 9+1 Switching positions Flat table turret : 3+1 switching positions Milling and drilling device. Drum magazine for drilling and milling tools (ATC) 4-fold revolver with quill Full clamping cylinder Three-jaw chuck KNCS 400 92 3A11, SMW Chip conveyor Height of Turning spindle above floor: 1233mm Height of the spindle above the lower edge of the machine : 1165mm Net Weight : 28000 Kg. Machine is complete with a Lot of accessories.

316

ID	MI9083
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Unit Sale CNC PRIDE JAGUAR - 2018 Fanuc Control OI TF 250 Chuck With Tailstock 500 mm Length Qty : 3 Nos CNC PRIDE ULTRA LYNX - 2014 Fanuc Control Oi TD 200 mm Chuck With Tailstock 400 mm Length Qty : 1 Nos CNC PRIDE LEO - 2015 Fanuc Control 200 mm Chuck With Tailstock 400 mm Length Qty : 1 Nos With Stabilizer Compressor Tools & Accessories

317

ID	MA36644
Make	Biglia
Model	B1200L
YOM	2005
Condition	Good Condition
Photo	See Photo
Fanuc 21i-TB Max turning diameter: 400mm Max. turning length: 1200mm Main spindle: 315mm Spindle RPM: 2800 Number of fixed tool holders in 1th turret: 12

318

ID	MA36643
Make	GILDEMEISTER
Model	Sprint65
YOM	2007
Condition	Good Condition
Photo	See Photo
10 Axis CNC Turning Center GILDEMEISTER SPRINT 65 LINEAR Year: 2007 2 spindles 8 linear axis 2 C axis 3 turrets 12 positions each Main spindle : Bar passage mm.65 Internal bore mm.75 Spindle nose mm.140 5000 rpm Kw 20 Nm 191 Subspindle : Internal bore mm.42 Spindle nose mm.140 5000 rpm Kw 17 Nm 108 W2 Subspindle axis mm.690 X1 mm.165 Z1 mm.220 X2 mm.165 Z2 mm.150 X3 mm.165 Z3 mm.650 Y3 mm.80 (+50/-30) 3 Automatic Turrets, 12 positions each, all with driven tools Driven tools rpm 4000 Driven tools Nm 12/30 Driven tools Kw 2,5/6 High pressure 50 bar Paper filtering unit CNC FANUC 310i Conveyor CE Machine dimensions ( without equipments ) mm.4500 x 1990 x 2300, weight Kg.9000 Conveyor weight Kg.750 Bar loader TOP AUTOMAZIONI XFS372, year 2015 Unloading station

319

ID	MI9077
Make	Pride-Jaguar
Model
YOM	2018 / 2017 / 2014
Condition
Photo	See Photo \| See Video
5 no's 2018 model 2 no's 2017 model 1 number 2014 model 2 no's The above lot includes 2 stabliser and 1 compressor

320

ID	MA36629
Make	Doosan
Model	Puma1500SY
YOM	2011
Condition	Good Condition
Photo	See Photo
Bi spindle bi turret + XY + C + part catcher Lema bar feeder 50 x 2m HP pump oil separator 34 tool holders 12 rotary cn fanuc 18i-TB series Working time 8300H Operating time 14000H

321

ID	MI9046
Make	BFW,India
Model
YOM	2020
Condition	Good Condition
Photo	See Photo
Chuck size : 200mm Length : 400mm Control : FANUC TF With - Stabilizer

322

ID	MI9045
Make	Yantrang
Model
YOM	2021
Condition	Good Condition
Photo	See Photo
Chuck size : 200mm Length : 300mm Control : FANUC TF PLUS With Stabilizer

323

ID	MI9043
Make	Macpower
Model	MONO-300
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuck size : 300mm Length : 550mm Control : Siemens With Stabilizer

324

ID	MI9032
Make	Takisawa,Japan
Model
YOM	2000
Condition	excellent working condition
Photo	See Photo
Control:fanuc 21t X Travel :200 z Travel : 325 spindle: A2 6 spindle Motor:7.5/11 KW

325

ID	MA36601
Make
Model	CKF61140A
YOM
Condition	Good Condition
Photo	See Photo
CNC Horizontal Lathe. NEW D-F 1,400mm x 10,000mm (55� x 400") Max. Diameter of workpiece over bed 1400mm Max. Diameter of workpiece over carriage 1030mm Max. Length of workpiece 3000mm Spindle bore 100mm Load between centers 6 ton Width of bed 755mm Max. Travel of carriage in Z axis 3000mm Max. Travel of carriage in X axis 530 640mm 715mm Spindle speed range-4 steps 2~20r/min 3~40r/min 10~150r/min 20~300r/min Turret 4 position electric turret Tail stock taper bore 160mm/Morse 6 Feed pulse equivalence Z/X X axis 0.001mm (Diameter) Rapid feed speed X/Z axis 6000mm/min X axis 0.03mm Positioning accuracy Z axis 0.045mm 1500 0.050mm 2000 0.060mm 3000 0.080mm 5000 Repeatability accuracy X axis 0.012mm Z axis 0.020mm 1500 0.025mm 2000 0.025mm 3000 0.025mm 5000 Main motor 30kw 4 steps(stepless in each range) CNC System Siemens 828D Total power 125A, 380V 50Hz, 3phases, 3 wires 1 CNC control Siemens 828D 2 X/Z axes servo motor Siemens 3 Main motor SENLIMA/WN 4 Ball screw of X axis NJGY/HIWIN 5 Ball screw of Z axis NJGY/HIWIN 6 Four position electrical tool post Huanqiu Yantai 7 Spindle bearing NSK-Japan 8 Centralized lubrication unit ISHAN-Taiwan 9 Electric units in cabinet Siemens/Schneider/ABB Option 10 Air condition for electric cabinet Tongfei Option 11 CNC control panel station Mecano-German 4-jaw independent chuck Φ1000mm（CKF61100A） Closed type steady rest Φ200～550mm（std.） Φ500～850mm(opt.） Center MT 1/1 pc Spanner for chuck 1 pc Foundation bolts & nuts 1 set Foundation pads 1 set Oil gun 1 pc Hand tools 1 set ●Low speed, the chuck is driven by the gear and the gear ring at the rear side of chuck. ●High speed, the chuck is drive by the spindle. CKF-A Series Max. workpiece load 6-8 tons Width of bed is 755mm,two guideways in Z axis Closed type steady rest CKF61100A Standard chuck guard 4 jaw Chuck(mm) Center Center sleeve Oil gun Wrench

326

ID	MI9025
Make	Jyoti
Model	DX200
YOM	2022
Condition	Good Condition
Photo	See Photo
Chuck size : 200mm Length : 500mm Control : fanuc Model : Jyoti DX 200

327

ID	MI9024
Make	Jyoti
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
lathe cnc make - jyoti control - fanuc oi tf chuck - 200mm length 400mm year - aug 2015

328

ID	MI9023
Make	Jyoti
Model
YOM	2016
Condition	Good Condition
Photo	See Photo
lathe cnc make - jyoti control - fanuc oi tf chuck - 200mm length 400mm year DEC - 2016

329

ID	MI9022
Make	LMW
Model	LX20T L5
YOM	2023
Condition	Good Condition
Photo	See Photo
Make - LMW Model - LX20L5 Chuck - 200mm LENGHT - 500mm Control - FANUC

330

ID	MI9021
Make	Ace jobber
Model
YOM	2016
Condition	Good Condition
Photo	See Photo
Machine: ace super jobber 500 Controller: fanuc TF Chuck:200 Length:500 With sterilizer

331

ID	MI9020
Make	Nakamura
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
Machine: Nakamura Controller: fanuc TF Chuck 200mm Length 500mm 12 tool station Excellent condition

332

ID	MI9019
Make	Ace jobber
Model
YOM	2014
Condition	Good Condition
Photo	See Photo
Machine: ace super jobber 500 Model: 2014 Controller: fanuc Chuck:200 Length:500 With sterilizer

333

ID	MI9018
Make	LMW
Model	LX20T L5
YOM	2019
Condition	Good Condition
Photo	See Photo
Machine: LMW Model: LX20T L5 Controller:fanuc Chuck:200 Length:500

334

ID	MA36591
Make	Okuma
Model	LC40
YOM
Condition	Good Condition
Photo	See Photo
4 Axis Front Turret for 8 Tools Rear Turret for 12 Tools No Tailstock 3 Jaw chuck Dia:300mm Assembled complete besides this a second 2 Jaw chuck diameter 300mm Clamping Device: FORKARDT HSR: 315 Koyo With 20 Tool Holders External and Internal and various boring Bars CNC Control: OSP 3000

335

ID	MA36590
Make	Okuma
Model	LC20
YOM	1979/1980
Condition	Good Condition
Photo	See Photo
Chuck Dia: 250mm Complete Temperate Jaws and Reversible 7 series Turning Jaws Travel min:570mm Turret: 8 Tools. 12 Tools Holders for Internal Chip conveyor without Tailstock CNC Controller: OSP3000 4 Axes/5Axes

336

ID	MI9017
Make	LMW
Model	LX20TL3
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck dia 200 between center 300

337

ID	MI8988
Make
Model	TU30
YOM	2001
Condition	Good Condition
Photo	See Photo
600 mm Dia 1000 mm Length

338

ID	MI8987
Make	Leadwell,Taiwan
Model	LTC-50BL
YOM	1994
Condition	Good Condition
Photo	See Photo
2000mm Length CNC Turning 800 Turning Dia

339

ID	MI8960
Make	Batliboi
Model	Sprint 20TC
YOM
Condition	excellent working condition
Photo	See Photo
Control: Fanuc Oi Mate td Travel Size: X axis- 200mm Y axis- 500mm with Tailstock Power Chuck: 200mm Swing over Bed:500mm Turning Dia: 275mm Turning Length:400mm Spindle speed: 30- 4000 rpm Max No of Tools in Turret: 8

340

ID	MI8937
Make	EMCO-Austria
Model	Emco365
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control:Fanuc Series21iT Chuck size: 300mm Swing size: 550mm Length : 650mm Milling Tool: 4 Made in Austria

341

ID	MI8921
Make	Ace,India
Model	LT30
YOM	2009
Condition	Good Condition
Photo	See Photo
Chuck size: 400mm swing over Bed:650mm swing over carriage:415mm Maximum Turning Dia: 390mm Maximum Turning Length: 1500mm Distance between Centers:1500mm Spindle size/Nose:A2-8 Max Bar capacity:68mm Bore through Spindle:80mm max spindle speed:3000rpm No of Stations:12 max boring Dia:40mm OD Turning Tool size: 25 x 25mm Tailstock base travel:1245mm Tailstock Quill Dia:100mm tailstocl Quill Travel:120mm tailstock Taper:MT-5

342

ID	MI8911
Make	Leadwell,Taiwan
Model	LTC30BP
YOM	1997
Condition	Good Condition
Photo	See Photo
Control : CNC (FANUC OT) ChuckSize: 12 inch BarCapacity: 3 inch Axis 2 Power: 40 hp MaxRPM:2500 rpm TurningDia: 19.29 inch Swing: 25.6 inch MachiningLength: 60 inch Tailstock : Yes Weight: 18000 catalogid: 1426

343

ID	MA36485
Make	WEMAS
Model	DZ 610 2000
YOM	2017
Condition	Good Condition
Photo	See Photo
CNC control FANUC Oi TF traverse paths: X - Axis 335mm Z - axis 2,087 mm Swing diameter max. 780 mm Turning diameter max. 610 mm Turning length max. 2,087 mm Main spindle A 2 - 11 DIN 55026 Spindle Head 131 mm Spindle bore 115 mm Maximum speed 2,000 rpm digital AC - drive drive power 30 / 37 kW Turret number of positions 12 Tool holder VDI 50 Tailstock design as counter spindle without drive machine dimensions: Length: 6,510mm Width: 2,400mm Extras: Tool turret with 12 VDI 50 stations coolant device Tailstock with hydraulically controlled quill Hinge belt - chip conveyor Without hydraulic power chuck, but with clamping cylinder and draw tube hydraulic unit workspace lighting workspace cladding central lubrication Operating instructions and circuit diagram programming guide operator tool

344

ID	MA36483
Make	Doosan
Model	PUMA240MSC
YOM	2009
Condition	Good Condition
Photo	See Photo
Control Fanuc Chuck diameter 200 mm Turning diameter 300 mm Turning length 513 mm Spindle passage 65 mm X travel 205 mm Z travel 580 mm Main spindle 4500 rpm 18.5 kW, spindle bore 76 mm, hollow clamping cylinder, C-axis Counter spindle 6000 rpm 5.5 kW, spindle bore 42 mm, hollow clamping cylinder, C-axis Turret 12 pos., driven pos. 5,000 rpm Accesories standard accessories Chip conveyor with pump transformer Bar magazine IEMCA VIPO 80 E II parts ejection

345

ID	MA36482
Make	Doosan
Model	PUMA700LM
YOM	2008
Condition	Good Condition
Photo	See Photo
CNC control FANUC 21i TB Operating hours: On:3400h or spindle:1100h Turning diameter 900 mm Turning length 3100 mm Swing diameter 1030 mm Standard turning diameter 750 mm Rod diameter 90 mm Spindle bore 110 mm Travel - x 471 mm Travel - z 3225 mm Rapid traverse - longitudinal/transverse 15/ 20 m/min Spindle speed 3000 rpm Spindle motor 45 kW Turret stations / powered by 12 / 6 BMT 85 drive power driven Tools 7.5/5.7 kW speed driven Tools 3000 rpm Total power requirement 62.2 kVA Machine weight approx. 22.2 t Space requirement approx. 6.1 x 2.2 x 2.2 m

346

ID	MI8909
Make	Jyoti,India
Model	DX200
YOM	2011
Condition	Good Condition
Photo	See Photo
Chuck Dia: 200mm Length:500mm Controller: Siemens

347

ID	MI8908
Make	Jyoti,India
Model	DX200
YOM	2016
Condition	Good Condition
Photo	See Photo
Chuck Dia: 200mm Length: 500mm Control: siemens

348

ID	MI8907
Make	Jyoti,India
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
chuck Dia:200mm length:500mm Control: Mitsubhishi

349

ID	MI8905
Make	Ikegai,Japan
Model
YOM	2000 (Retrofitted in 2020)
Condition	Good Condition
Photo	See Photo
Chuck Dia: 250mm Length:650mm with Tailstock Control: Mitsubishi-e70

350

ID	MI8898
Make	Nakamura Tome,Japan
Model	TMC3
YOM
Condition	Good Condition
Photo	See Photo
Turning Dia: 250mm Turning Length:700mm Controller: Siemens 808 new control Chuck dia: 8" ( 200mm) Gear head Spindle:2850rpm Spindle Bore : 45mm 12 Station Tool Turret

351

ID	MA36469
Make	Giddings & Lewis
Model	ER48
YOM	1995
Condition	Good Condition
Photo	See Photo
Complete machine: 12 station Tool Changer Tool Capacity: 381mm Dia x 508mm length. 4-jaw Chuck : 1220mm Tool Holders: Table jaws Swarf Conveyor

352

ID	MI8895
Make	ACE Micromatic
Model	LT20
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Diameter: 250 mm Maximum Turning Diameter : 350 mm Maximum Turning length: 600mm Controller: fanuc OT No .turret station :8 Model :LT 20 classic

353

ID	MI8894
Make	Tsugami,Japan
Model	BM-163
YOM	2010
Condition	Good Condition
Photo	See Photo
CNC sliding Head Max turning Dia: 16mm Max workpiece length: 30mm spindle speed:12000 rpm spindle power: 2.2/3.7 KW Z1 axis:32mm No of Tools:13 nos Feed rate rapid Travese:m/mm 32 (x1.24) Control:Fanuc Oi TD Machine weight: 1400kgs. Machine with 1.5 meter Length Bar Feeder

354

ID	MI8892
Make	Takisawa,Japan
Model	TC20
YOM	2001
Condition	excellent working condition
Photo	See Photo \| See Video
Chuck Dia: 200mm Travel size: 300 x 300mm with Tailstock RPM:6000 Control:Fanuc 01 TC

355

ID	MI8890
Make	Ace jobber
Model
YOM	2018 DEC.
Condition	Good Condition
Photo	See Photo
CHUCK 250MM LENGTH 500MM CONTROL FANUC

356

ID	MA36446
Make	Gildemeister,Germany
Model	CTX400
YOM	1999
Condition	Good Condition
Photo	See Photo
capacity �420�635 mm

357

ID	MA36444
Make	GILDEMEISTER
Model	CTX410
YOM	2004
Condition	Good Condition
Photo	See Photo
swing over bed / slide �505 / �365 mm, turning length 600 mm, XZ 260�635 mm, spindle bore �76 mm

358

ID	MI8862
Make	Jyoti,India
Model	DX350-1000
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck Dia:400mm Turning Length:1000mm Control: Siemens 828D

359

ID	MI8806
Make	Jyoti,India
Model	DX200
YOM	2015
Condition	Good Condition
Photo	See Photo
Controller: Siemens 828 Chuck Size:250mm Between centers :500mm Spindle Bore: 52mm With Through Coolant.

360

ID	MI8805
Make	scotish machine Tools(UK)
Model
YOM
Condition	Good Condition
Photo	See Photo
Controller: Fanuc Oi TF Chuck Dia:2500mm Swing over Bed: 2800mm Swing over on Carriage(ABC)5000mm approx 4 Jaw Chuck chuck: RPM 60 Geared Heasdstock Gear Box Lubrication Automatic Slide Lubrication Automatic Tainstock with Motorized Movement. Tainstock Sleeve Dia:200mm Sleeve Movement: manual. Box Guideways: All Guideways grinding Done. Accuracy: 0.05mm Square Tool post: 4 station Appox weight: 58 Tons Machine Status: Ready to take Production.

361

ID	MA36389
Make	Citizen
Model	L-20-5
YOM	2004
Condition	Good Condition
Photo	See Photo
Made in Japan With sub spindle and size milling Also 3M Length bar control: Mitsubshi 7 Axis

362

ID	MI8769
Make	Jyoti
Model	DX250
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck size : 250mm Length : 1000mm ( 1 mtr ) Control : SIEMENS

363

ID	MI8764
Make	LMW
Model	smart plus
YOM	2018
Condition	Good Condition
Photo	See Photo
chuck Dia:165mm Control: Fanuc

364

ID	MI8761
Make	Leadwell,Taiwan
Model	LTC-50BL
YOM
Condition	Good Condition
Photo	See Photo
Max swing: 900mm Swing over cross slide:700mm Max turning dia:800mm Max turning length:2035mm Bar capacity: 117mm max work piece weight: (without tailstock) 3000kgs Travel : X axis : 400 + 25mm Z axis:2100mm spindle speed range:1500rpm Chuck size: 381mm Spindle Nose: A2-11 Hole through spindle: 140mm spindle power: 37mm Spindle Toeque: 379.3 kg-m Turret: Number of Tools: 12 Shank height for square tools: 32mm FeedRate: x axis rapid traverse: 10000mm z axis rapid traverse: 12000mm Quill movement Type: Hydraulic Quill stroke: 125mm Quill diameter:155mm Quill Taper: 6MT With Chip Conveyor nd Hydraulic steady rest Control: Fanuc

365

ID	MI8760
Make	Fastcut
Model	CY-6511
YOM	2008
Condition	Good Condition
Photo	See Photo
workpiece Dia:50mm Max Workpiece length: 100mm Hydraulic Unit Motor: 0.75KW Main Motor: 2.25KW machine Size:2110 x 1400 x 1880mm

366

ID	MI8754
Make	Monforts
Model	800
YOM	2013
Condition	Good Condition
Photo	See Photo
Control Siemens Sinumerik 800 Swing Over Bed 500 mm Turning Diameter Over Radial Slide 280 mm Turning Length 750/1250 mm Travels X Axis 220 mm Travels Z.Axis 840/1340 mm 2 tools turrets with 12 tools type VDI40 Spindle Dia 130 mm Spindle Mount A 8 Material let through 85 mm Turning Speed 11- 4000 u/min Maine Drive 34KW Max . torque 859 Nm Diamension in mm :Approx .3100 x 1700 x 1700 x 1900 Weigta in kg Approx 6000

367

ID	MI8740
Make	Nakamura Tome,Japan
Model	SC-450
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 15 " Z travel length 800 mm X travel Dia 650 mm Maximum dia swing over bed 810 mm spindle bore 78 Mm Fanuc 21 T control

368

ID	MI8720
Make	Takisawa,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck:400mm Swing:580mm BC:1200 Spindle: A-11 Total Power:20HP Turret: 12 stations Chip Conveyor Control: Fanuc 21T

369

ID	MI8718
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
chuck:400mm Machining Axis:3 axis Maximum turning length: 300mm Horizontal centre Control: mazatrol cam T-2

370

ID	MI8715
Make	Macpower
Model	1000
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
Between Centre:1000mm Swing:500mm Without chuck

371

ID	MI8714
Make	Ikegai,Japan
Model	TU30
YOM	2001
Condition	Good Condition
Photo	See Photo
Control: Fanuc 18T Turning Dia: 600mm Turning Length: 1000mm Hydraulic Chuck: 20 Inch Turret Station: 12 Tailstock Chip Conveyor.

372

ID	MI8713
Make	Takisawa,Japan
Model	TC46
YOM
Condition	Good Condition
Photo	See Photo
Chuck size : 400mm Swing size : 580mm Turning length : 1200mm Spindle A-11 Total power 20 HP Turret 12 station Chip Conveyer Control - FANUC 21T

373

ID	MI8706
Make	Tsugami,Japan
Model	M08J
YOM	2018
Condition	Good Condition
Photo	See Photo
Check Dia 200 Turning Length 400 Tailstock rpm 400 Fanuc Control

374

ID	MI8675
Make	Anyang
Model	DY-760x3000CN
YOM	2000
Condition	Good Condition
Photo	See Photo
Control : Anilam cnc control Direct Imported from Canada swing over Bed : 760 mm swing over cross slide : 500 mm Maximum turning Dia : 760 mm Max turning Length : 3000 mm

375

ID	MA36335
Make	Taiwan
Model	CNC T-01 PROKING
YOM	2014
Condition	Good Condition
Photo	See Photo
DIA- SWING- SIZE- 800 MM THROW BOAR SIZE:- 12 INCH LENGTH :- 3M FANUC CONTROL

376

ID	MI8660
Make	Jyoti,India
Model	DX200(5)
YOM	2012
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size - 200 Turning length - 500mm Spindle size - A2-6 Control - Siemens 802d

377

ID	MI8659
Make	Ace jobber
Model
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size - 200mm Turning length - 350mm Spindle size - A2-5 Control - fanuc o-t

378

ID	MI8657
Make	Jyoti
Model	DX200
YOM	2007
Condition	Good Condition
Photo	See Photo
Chuck : 250 Z : 500mm X : 200mm Spindle : A26 Spindle Bore : 52mm Machine with chip conveyor

379

ID	MI8644
Make	Dalian
Model
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuch size - 350mm Turning length - 1200 mm Swing - 500 Spindle bore - 90mm Control - Siemens 802c Spindle gearbox drive Heavy duty Flat Bed CNC

380

ID	MA36312
Make	Everox
Model	EBL-1400-3400
YOM	2012
Condition	Good Condition
Photo	See Photo
control: Fanuc Oi-TD with 8.4" LCD Colour Monitor 3V Guideway Type Bed with no gap. 30/37 (50HP) spindle motor Alpha iF 30/6000 Headstock Hydraulic Auto speed shifting 4step(4-400 RPM) 28" Jaw 4 jaw Independent Chuck with one set hardjaw & softjaw. Spindle Thru hole Diameter: 230mm/A2-15 Maximum Swing: 1400mm Maximum Travel: X=750mm, Z=3400mm. Rapid Feed: X=10 meter, Z=8meter. HP350-6T Hydraulic Turrent ( Diameter 350mm) Fully Splash Guard. Fully Hydraulic Rotary Type tailstock Center Work light & Coolant System: 6 bar chain Type Chain Conveyor Bearing Steady Rest: 380-700mm MT6 Live centers for Tailstock Heat Exchanger for Control cabinet. Double Ballscrew for Z axis OPTION: Upgrade To 32" 4 jaw Independent Chuck. Upgrade To Spindle Bore: A2-20/Dia 356mm.

381

ID	MI8637
Make	ACE Micromatic
Model	Classic
YOM	2002
Condition	Good Condition
Photo	See Photo
Dia : 315 Spindle : A2-6

382

ID	MI8636
Make	Macpower
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Between : 1000mm Center swing 450mm Spindle : A2/8

383

ID	MI8634
Make	Ace,India
Model	SJ500LM
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck size 250mm A2-6 Spindle Fanuc Series OiTF With Tailstock & stabilizer

384

ID	MI8633
Make	Ace,India
Model	ACE LT20
YOM	2010
Condition	Good Condition
Photo	See Photo
Chuck dia 300mm A2-8 spindle Fanuc Series OiTd Between Center 750mm With Tailstock

385

ID	MI8611
Make	OMG
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Chuck dia - 500 Dia on cross slide - 600 Length - 2150 Swing dia - 800 Spindle - 152 Control - Fanuc ot

386

ID	MI8609
Make	MAZAK
Model	ST40N
YOM
Condition	Good Condition
Photo	See Photo
Rough Turning Diameter: 540mm Cutting Diameter: 335mm Distance between the two middle: 2090mm X axis : 495 (415+80)mm Z axis : 2070mm Spindle Cone : A2-8 Spindle Bore: 80mm Spindle Hollow Cone: AST-Nr.350 (Kegel 1/16) Spindle Tip: M.T. Nr.5 (Nr.4) Pivot Speed range: 4-2200 UPM (6-3000 upm) Tailstock Spindle : 25-130mm Roughest tail stock Thrust : 1500 (1100) KG Heaviest load : Forrage work: 300 kgs : wave work : 1500kgs Standard Feed: HOWA HO1MA-12 Control: mazatrol cam.

387

ID	MI8607
Make	Takisawa,Japan
Model	TC46
YOM
Condition	Good Condition
Photo	See Photo
Chuck 400 Swing 580 BC 1200 Spindle A-11 Total power 20 HP Turret 12 station Chip conveyer Fanuc 21T

388

ID	MA36289
Make	Haas
Model	SL20HE
YOM	2008
Condition	Good Condition
Photo	See Photo
Max. turning diameter:260mm Max. turning length:500mm Max. bar diameter:51mm XZ travel:200x500mm Spindle speed:4000rpm Spindle bore:51 mm Weight of the machine approx:4500kg Machine size-LWH:3100x1600x1800mm

389

ID	MI8606
Make	Mori Seiki
Model	SL5H
YOM	1990
Condition	Good Condition
Photo	See Photo \| See Video
Control: FANUC CNC CONTROL Chuck Size: 10" Hydraulic chuck Maximum Swing Over Bed: 620mm Swing Over Carriage: 546mm Maximum Machining:361mm Maximum Machining Length: 1039mm Between Centre: 1070 lm Spindle Bore: 68mm Spindle Speed: 4000 RPM Turret Type: 12 position Turret

390

ID	MI8599
Make	Jyoti
Model	DX200
YOM	2011
Condition	Good Condition
Photo	See Photo \| See Video
Control - Fanuc TD Spindle Dia - 200 Between ceneter - 500 Without tail stock Spindle power- 7.5/11 Spindle speed - 4000 RPM With stablizer

391

ID	MI8593
Make	Macpower
Model	GX-100-super
YOM	2016 and 2017
Condition	Good Condition
Photo	See Photo
Chuck Dia:165mm Maximum Turning Diameter:165mm Maximum Turning Length: 180mm Cross (X-axis) Travel: 360mm Longitudinal (Z-axis) Travel:180mm Rapid Traverse Rate (X/Z axis) : 24m/min Spindle nose: A25 Spindle Bore:54mm Maximum Bar Capacity: 42mm Spindle Speed: 50-4000 RPM Spindle Motor: 7.5KW Job Material: Stainless steel + Aluminium 8 Inches chuck in optional can be fitted by changing face plate.

392

ID	MA36275
Make	Mas/Kovosit
Model	MT70cnc
YOM	2001
Condition	Good Condition
Photo	See Photo
Swing : 700mm. Chuck size: 420mm Length: 1500mm

393

ID	MI8583
Make	Ace jobber
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck : 250 Length : 500 Fanuc : oi tc Model : 2008 Machine with stebilizer Good condition machine

394

ID	MI8563
Make	Hitachi Seiki
Model
YOM	1998
Condition	Good Condition
Photo	See Photo
chuck Dia: 12 inches (304mm) 400/600 Length : 650mm spindle Bore: 75mm control: Siemens 802

395

ID	MI8560
Make	Jyoti,India
Model	DX200/7
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck size 250mm Turning length 700mm Fanuc Series OiMate Td With Tailstock & steady rest length of the machine: 700mm

396

ID	MI8480
Make	LMW
Model	LL20TL10
YOM	2017
Condition	Very good condition
Photo	See Photo
LMW TURNING CHUCK 200 LENGTH 1 METER WITH STEADY REST

397

ID	MI8467
Make	Jyoti
Model	DX200-3A
YOM	2015
Condition	Good Condition
Photo	See Photo
Siemens 828D Size 200�300 Only machin No stabilizer

398

ID	MI8466
Make	Lokesh
Model	TL-160
YOM	2019
Condition	Good Condition
Photo	See Photo
Control - fanuc oi tf Chuck size: 165 Spindle - A2 5 Spindle bore - 42 mn With tailstock

399

ID	MI8464
Make	Ace jobber
Model	Super Jobber
YOM	2011/2012/2013
Condition	Good Condition
Photo	See Photo
Chuck diameter 200mm A2-6 Spindle Fanuc series OiMate Td With Tailstock Quantity- 2 nos

400

ID	MI8462
Make	puma
Model	400
YOM	2001
Condition	Good Condition
Photo	See Photo
swing over bed mm/inch: 700(27.56) swing over saddle mm/inch: 480(18.90) Recom. mach dia mm/in : 380(14.96) Max machining dia mm/in : 550(21.65) Max work length mm/in : 1050(41.34) X axis mm/in : 362((87+275) Z axis mm/in : 1050(43.50) Chuck Dia mm/in : 381(15) Speed range : 20-2000 Spindle nose: A2-11 Spindle bore dia : 132/6.20 Bearing dia : 180/7.09 Tool height : 25mm/1inch

401

ID	MI8461
Make	Jyoti
Model	DX200/7
YOM	2015
Condition	Good working condition
Photo	See Photo
Chuck size - 250 Turning length - 700 Control - fanuc oi tf With study rest

402

ID	MI8460
Make	PARISHUDH
Model	TC 250 CNC
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Turning Dia 250 mm. Turning Length 500mm. Maximum Swing Dia 350mm. Control Siemens 802D. Under Siemens AMC

403

ID	MI8458
Make	Jyoti,India
Model	DX200
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck dia : - 200 Length - 500 Tool station - 12 With tailstock Z 500mm X 200mm spindle: A26 spindle bore: 52mm machine with chip conveyor

404

ID	MI8456
Make	puma
Model	PUMA400LB
YOM	2001
Condition	Good Condition
Photo	See Photo
Recom.machine dia: 380(14.96) Draw tube dia: 117.5(4.63) Chuck Dia: 381(15) Speed range: 20-2,000 Spindle nose: A2-11 Spindle bore dia: 132(5.20) Bearing dia: (front) 180(7.09)

405

ID	MI8454
Make	Ace,India
Model	cub lm
YOM	2017
Condition	Good Condition
Photo	See Photo
Chuck 165 Fanuc oi tf Machine with stebilizer

406

ID	MI8448
Make	Ace jobber
Model	Jobber LM
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck diameter 200mm Siemens 828d Controller With Tailstock

407

ID	MI8445
Make	Ace jobber
Model	Jobber LM
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck diameter 200mm With stabilizer

408

ID	MI8444
Make	Marshall
Model	SL20
YOM	2019
Condition	Good Condition
Photo	See Photo
Chuck diameter 315mm Turning length 1200mm A2-11 spindle Fanuc Series OiTF Controller With Tailstock, steady rest ( 3 nos ) Stabilizer & Toolings

409

ID	MI8443
Make	Jyoti
Model	DX150
YOM	2009
Condition	Good Condition
Photo	See Photo
Chuck Size 6" X 200 Z 300 Iron Fanuc TC Control with step down with chipconvear

410

ID	MA36173
Make	Castor
Model	UNO
YOM
Condition	Good Condition
Photo	See Photo
Horizontal lathe raking bed/CNC Distance between centre mm. 3000 Max.swing over bed mm. 480 Max.swing over cross slide mm. 340 Spindle bore mm 77 Spindle nose ASA 8" Spindle motor power kw. 28,5 Spindle speed Rpm. 25/3000 Tailstock diametre mm. 115 Quill tailstock stroke mm. 180 Number of tools in the turret n� 12 Self centering chuck 3 jaw mm. 315 CNC ECS 2302 CHIP CONVEYOR 2 AUTOMATIC STEADIES MORARI diam. 20/158 max.193 SMOKE EXHAUST FAN

411

ID	MA36172
Make	Yang
Model	ML25A
YOM
Condition	Good Condition
Photo	See Photo
Horizontal lathe raking bed/CNC Height of centres mm. 295 Distance between centres mm 600 Swing over bed mm 350 Bed rake Deg. 45� Swing over bed mm 550 Max. longitudinal stroke mm 520 Max.swing diam to max. swing lenght mm �280xmm520 Z rapid feed Mt/min 12 X rapid feed Mt/min 20 Spindle speed range rpm Gir/min. 45--4500 Spindle bore mm 77 Headstock quill taper MT 7 Tailstock diam. mm 85 Tailstock max stroke mm 449 Spindle Motor KW 11 Overall dimension Mt 4x2x2,2h Weight Kg 5000 CNC FANUC OT SELF CENTERING CHUCK.DIAM. 300 CHIP CONVEYOR AUTOM.TURRET.6 POS

412

ID	MI8439
Make	Storm
Model
YOM
Condition	Good Condition
Photo	See Photo
6 inch Chuck with 330 length, Fanuc OT

413

ID	MI8437
Make	Doosan
Model	S400
YOM	2005
Condition	Good Condition
Photo	See Photo
With Fanuc O-iTC Control Chuck Size: 300 mm Turning Dia: 400 mm Turning Length: 700 mm With Programmable Tailstock

414

ID	MI8436
Make	Yama Seiki
Model	GA2800
YOM	2010
Condition	Good Condition
Photo	See Photo
With Fanuc O-iTD Control Equipped with 250 mm 3-Jaw Chuck Machine can be seen under power. Works very smooth

415

ID	MA36102
Make	Goodway
Model	GLS150
YOM	2019
Condition	Good Condition
Photo	See Photo
Spindle speed -6000 rpm Machine weight -2200kg voltage-880 Main power switch -40 current rating of the spindle motor -69 short circuit current-15 Rated capacity -25 KVA

416

ID	MI8435
Make	Ace jobber
Model
YOM	2008
Condition	Good Condition
Photo	See Photo
FANUC TC CONTROL WITH TAILSTOCK 250 CHUCK 400 LENGTH

417

ID	MA36091
Make	Hardinge
Model	GS250
YOM	2012
Condition	Good Condition
Photo	See Photo
Vertical Block Type : 1 Number of Station : 12 Square Shank Tool Size : 0.98"(25mm) or 1" Round Shank Tool Size : 1.57"(40mm) or 1 1/2" Vertical Block : 0.30 second Positioning : Hydraulic Morse Taper : MT No.5 Travel of Tailstock Base : 24.60" (625mm) Feed Rate - max : 216.54ipm(5.5m/min) Thrust Max : 2102ft/lbs(9,354N) Work piece Dia. x lenght x Max. : 2.56 x 6.30" Fanuc Controlled : 220v/74FLA/3phase Coolant Tank Capacity: 76gal Coolant Pressure - Standard : 40psi Through Tool Coolant : 290psi Machine Weight : 5.5ton Shipping Weight : 5.6 ton Machine Dimensions Lenght : 2988mm Weight with chip conveyor option : 3672mm Depth : 2142mm Depth With Control Unit at max. Swivel : 2453mm Height : 1812mm Floor Area : 68.89 sq.ft

418

ID	MA36085
Make	Colchester
Model	Tornado300
YOM	1997
Condition	Good Condition
Photo	See Photo
WORKING CAPACITY Max Turning Diameter: 300 mm Max Turning Length: 500 mm Swing: 530 mm Chuck Equipped: 300 mm Travels (X / Z): 240 / 500 mm Rapid Travels (X/Z): 10/20 m/min CNC Control: Fanuc OT (Alpha Drives) SPINDLE Max Rotation Speed: 3000 RPM Spindle Nose: A2-8 Spindle Bore: 91 mm Spindle Motor Power: 18 / 22 kW TAILSTOCK Tailstock: Yes TURRET Turret: 12 Stations (VDI 40) Machine Dimensions Weight: 3.5T Floor Space: 3.26 Sq. Meter

419

ID	MA36065
Make	Doosan Daewoo
Model	PUMAMX2500ST
YOM	2005
Condition	Good Condition
Photo	See Photo
Turning diameter 500 mm toolchanger positions 12 number of controlled axes 3 + 2 tool taper ISO 40 turning speed range 4,500 rpm weight approx. 5,800 kg

420

ID	MA36064
Make	Mori Seiki
Model	NL2000SY500
YOM	2007
Condition	Good Condition
Photo	See Photo
Turning diameter 500 mm toolchanger positions 12 number of controlled axes 3 + 2 tool taper ISO 40 turning speed range 4,500 rpm weight approx. 5,800 kg

421

ID	MI8392
Make	Doosan Daewoo
Model	PUMA230MSA
YOM	2002
Condition	Good Condition
Photo	See Photo
Control fanuc 18 i t 200 mm chuck 500 mm turning length With one live tool With sub spindel 12 station turret With tool touch prob With sub spindel

422

ID	MI8385
Make	ACE Micromatic
Model	Jobber LM
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck Dia - 200 Turning length - 380 Spindle - A2 -5 With tailstock

423

ID	MI8379
Make	Doosan
Model	TL-2000
YOM	2007
Condition	Good Condition
Photo	See Photo
Fanuc 18i-TB SPECIFICATIONS CHUCK:8� or 10� TRAVEL(X-Z):250-650, Spindle RPM:5000(INTIGRATED SPINDLE-For high Accuracy ) DIA:360, LENGTH:600, WEIGHT:8250 KG DOUBLE TURRET(FOR SHAFTS-NO STEADY REST IS REQUIRED)(ROUGHING AND FINISHING CAN BE DONE SIMELTANEOUSLY) EQUIPPED WITH Chip Conveyor, Coolant Tank

424

ID	MI8373
Make	Jyoti
Model	DX135nvu
YOM	2020
Condition	Good Condition
Photo	See Photo
Chuck Dia - 135 Turning length - 240 Spindle bore - 39 Spindle nose - A2-4 Max bar capacity - 30 Tool size - 20�20 Number of station 8 High precision LM guide ways

425

ID	MI8365
Make	Haas
Model	SL10T
YOM	2007
Condition	Good Condition
Photo	See Photo
Chuck dia 165 mm job length 200 mm

426

ID	MI8349
Make	Galaxy
Model	midas6 plus
YOM	2016
Condition	Good Condition
Photo	See Photo
Max turning dia 240 mm Max turning length 365 mm Spindle size A2-5 Spindle motor fanuc 30 min 7.5 kw Swing over bed 425 mm Max bar capacity 40 Standard chuck size 165 Turret type electr mechanical No. of station 8st Max boring bar dia 32 Od turning tool size 25 oi TF fanuc control without stabilizer

427

ID	MI8343
Make	Daewoo Puma
Model	400C
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
With Fanuc 18T Control

428

ID	MA35995
Make	Daewoo Puma
Model	300
YOM	2000
Condition	Good Condition
Photo	See Photo
Bar Capacity: 101.6 mm Chuck Size: 304.8 mm Spindle Speed: 2800 RPM Spindle Motor: 35 HP X Axis Travel: 279.4 mm Z Axis Travel: 680.7 mm Rapid Rate Z Axis: 24003 mm per min Turret Tools: 12 station Rapid Rate X Axis: 19989 mm/min Max Turning Dia: 398.7 mm Max Turning Length: 629.92 mm Max Swing: 568.9 mm Dimensions: 3302 mm x 1955.8 mm x 2032 mm Weight: 12,600 LBS 5670 KG Equipped With: Fanuc 18i-T Chip Conveyor Tool Presetter Tailstock gantry loader

429

ID	MA35994
Make	Hyundai
Model	SKT-100
YOM	2011
Condition	Good Condition
Photo	See Photo
6inch, FANUC Oi Toosetter, Tailstock Conveyor

430

ID	MI8342
Make	Daewoo
Model	PUMA 300
YOM	2005
Condition	Good Condition
Photo	See Photo
Swing Over bed : 570mm Swing Over Saddle : 370mm Recom. machining dia : 305(12) Max. Machining dia : 400mm Max. work Lenght : 630mm/1280mm Draw tube dia : 103mm Travels: X Travels : 282mm Z Travels : 1330mm Spindle : Chuck Dia : 304mm Speed Range : 28-2,800 rpm Spindle Nose : A2-11 Spindle Bore Dia : 115mm Bearing dia : 160mm Turret : No. of tool stations (type) : 10st OD Tool height : 25mm Boring bar dia : 40mm Indexing time : 0.1sec Rapid Traverse : X:20,000/Z:24,000 Cutting Feed : X,Z:0.001-500.00

431

ID	MA35993
Make	HYUNDAI WIA
Model	SKT28
YOM	2009
Condition	Good Condition
Photo	See Photo
10inch, FANUC Oi Toosetter, Tailstock Conveyor

432

ID	MA35992
Make	Hwacheon
Model	Hitech200B
YOM	2009
Condition	Good Condition
Photo	See Photo
10 inch, FANUC Oi Tailstock

433

ID	MA35991
Make	Hyundai-Kia
Model	SKT-100
YOM	2010
Condition	Good Condition
Photo	See Photo
6inch, FANUC Oi Toosetter, Tailstock Conveyor

434

ID	MA35990
Make	Hyundai-Kia
Model	SKT-100
YOM	2010
Condition	Good Condition
Photo	See Photo
6inch, FANUC Oi Toosetter, Tailstock Conveyor

435

ID	MA35985
Make	Daewoo
Model	PUMA 300
YOM	2000
Condition	Good Condition
Photo	See Photo
Bar Capacity: 4" Chuck Size: 12" Spindle Speed: 2,800 RPM Spindle Motor: 35 HP X Axis Travel: 11" Z Axis Travel: 26.8" Rapid Rate Z Axis: 945 IPM Turret Tools: 12 Station Rapid Rate X Axis: 787 IPM Max Turning Dia: 15.7" Max Turning Length: 24.8" Max Swing: 22.4" Dimensions: 130" x 77" x 80" Weight: 12,600 LBS

436

ID	MA35984
Make	Doosan
Model	PUMA 300C
YOM	2007
Condition	Good Condition
Photo	See Photo
Bar Capacity: 3.5" Chuck Size: 12" Spindle Speed: 2,800 RPM Spindle Motor: 35 HP X Axis Travel: 11.3" Z Axis Travel: 26.5" Rapid Rate Z Axis: 787 IPM Turret Tools: 12 Station Rapid Rate X Axis: 787 IPM Max Turning Dia: 15.7" Max Turning Length: 27.8" Max Swing: 22" Spindle Nose: A2-11 Dimensions: 77" x 148" x 80" Weight: 12,700 LBS

437

ID	MA35983
Make	Doosan
Model	PUMA 300C
YOM	2001
Condition	Good Condition
Photo	See Photo
Bar Capacity: 3.5" Chuck Size: 12" Spindle Speed: 2,800 RPM Spindle Motor: 35 HP X Axis Travel: 11.3" Z Axis Travel: 26.5" Rapid Rate Z Axis: 787 IPM Turret Tools: 12 Station Rapid Rate X Axis: 787 IPM Max Turning Dia: 15.7" Max Turning Length: 27.8" Max Swing: 22" Spindle Nose: A2-11 Dimensions: 77" x 148" x 80" Weight: 12,700 LBS Equipped With: Fanuc 18i-MB Chip Conveyor Tool Presetter Tailstock

438

ID	MA35982
Make	Doosan
Model	LYNX220LC
YOM	2014
Condition	Good Condition
Photo	See Photo
Bar Capacity: 2.625" Chuck Size: 6.5" Spindle Speed: 4,000 RPM Max Turning Length: 21" Max Swing: 20.1" Spindle Motor: 20 HP Dimensions: 101" x 63" x 65" Weight: 7,700 LBS Turret Tools: 12 Station Rapid Rate X Axis: 1 IPM Rapid Rate Z Axis: 1 IPM X Axis Travel: 6.9" Z Axis Travel: 21.7" Equipped With: Chip Conveyor Tool Presetter Tailstock

439

ID	MA35981
Make	Daewoo
Model	PUMA350A
YOM	1997
Condition	Good Condition
Photo	See Photo
Control: Mitsubishi Meidas 520L chuck: 15� c/w tailstock, coolant tank and chip conveyor. Machine size: L153� x W98� x H96� weight: 9 tons.

440

ID	MA35979
Make	Doosan
Model	LYNX 2100 LMB
YOM	2018
Condition	Good Condition
Photo	See Photo
1 X CNC LATHE Doosan LynX 2100 LMB Ann�e 2018 YEAR FANUC SERIE I CONTROL WITH CHUCK TURRET 12 P TAILSTOCK PARTS CATSCHER INTERFACE FOR BARE FEEDER TOLL EYES CHIO CONVOYER

441

ID	MI8309
Make	Miyano
Model	LE22B
YOM
Condition	Good Condition
Photo	See Photo
Photo attached X axis 350 Z axis 400

442

ID	MA35955
Make	Citizen Cincon
Model	L16
YOM
Condition	Good Condition
Photo	See Photo
CNC automatic Lathe with bar citizen Three frontal tools Two radial tools Theree Vertical tools complete of automatic loader with magazine bars of m.3 KURA SEIKI S16 CNC FANUC OT

443

ID	MI8280
Make	Ace Designers,Banglore
Model
YOM	2016/2019
Condition	Running Unit
Photo	See Photo \| See Video
JOBBER XL elite 200dia chuck lenth 400 j 400 XL 200check Lenth 400 A2 5ispindal Capacity :- Swing Over Bed - 510mm Swing Over Carriage - 340mm Admit Between Centres -420mm Maximum Turning Length - 310mm Interference free Turning Dia - 235mm Maximum Turning Diameter - 320mm Chuck size - 210(8") mm Spindle :- Spindle Nose - A2-6 Spindle Inside Taper - MT-7 Hole Through Spindle - 61mm Maximum Bar Capacity - 51mm Max. Spindle speed - std (option) - 3000rpm Motor Power(15min/cont) - 11.0/7.5 kw Spindle speed range for constant power(Continuous)- 1000-2250 rpm Maximum Torque in Spindle- 140/71 Nm Spindle front bearing (ID) -100mm TURRET:- Number of stations - 8 Tool shank size - 25x25mm Maximum Boring bar diameter - 40mm Indexing - Bi Directional Indexing time(per station) -0.9 sec TAILSTOCK:- Quill Dia/stroke - 75/100mm Quill taper - MT-4

444

ID	MI8278
Make	Jyoti,India
Model	DX350
YOM	2018
Condition	Good Condition
Photo	See Photo
WITH SIEMENS 828D CONTROL Dia : 350MM 1500 LONG MODEL NO DX-350/1500 Weight : 9.5 ton Approx

445

ID	MI8273
Make	Mori Seiki
Model	TL-5A
YOM
Condition	Good Condition
Photo	See Photo \| See Video
FANUC CNC CONTROL 558 mm : SWING 2032 mm : BETWEEN CENTERS CHIP CONVEYOR Medium : Direct Import Condition : Running

446

ID	MA35871
Make	Okuma Howa
Model	2SP20H
YOM	1995
Condition	Good Condition
Photo	See Photo
Control:FANUC SERIES18-TT XZ travel:175x200mm Distance between centres:350mm Max. turning diameter:210mm Max. turning length:200mm Spindle centre height to floor:1180mm Spindle speed:4500rpm Toolchanger:2x10atc

447

ID	MI8261
Make	Ace Designers,Banglore
Model	Jobber XL
YOM	2016
Condition	Good Condition
Photo	See Photo
Supply volt: 380/415 V AC 3 PEN, 50 Hz, Control volt: 24 V DC, Back up fuse: 63 A, Rated current: 24/22A KVA Rating: 16 KVA, Size of wire: 10 SQ mm

448

ID	MA35859
Make	DMG MORI
Model	CTX510EcoLine
YOM	2013
Condition	Good Condition
Photo	See Photo
Turning diameter: 465 mm Control: SIEMENS 840 D Centre distance: 1150 mm Centre height: 360 mm Max. swivelling range over bed: 680 mm Swivel range over X-slide: 465 mm Chuck diameter: 250 mm Travel X: 300 mm Travel Z: 1050 mm Bar passage: 76 mm Spindle bore: 103 mm With chip conveyor

449

ID	MA35857
Make	DMG MORI
Model	NLX2500/700
YOM	2015
Condition	Good Condition
Photo	See Photo
Control: M730UM with CELOS � ERGOline Touch Production hours: 3417 h Over bed: 590 mm Over cross slide: 360 mm Maximum turning diameter: 460 mm Maximum turning length: 720 mm Travels: � X-axis: 260 mm � Z-axis: 795 mm � X-axis: 30000 mm/min Rapid travers Y-axis: 30000 mm/min Number of tool station: 10 Tailstock travel aprrox.: 650 mm Spindle motor: 4000 rpm Comes with chip convoyer Number of controlled axles: 2 Turning speed range: 4,000 rpm Rapid travel range: 30 m/min Total power requirement: 22 kW

450

ID	MA35853
Make	Schaublin,Swiss
Model	130
YOM
Condition	Good Condition
Photo	See Photo
max diameter over bench: 520 mm max turning diameter: 220 mm max distance between centers: 300 mm spindle type: A2-5 collet type: 48 F max bar diameter: 42 mm spindle power: 17 KW rotation speed: 30 - 5 000 rpm X x Y strokes: 210 x 375 mm number of tools: 12 rotary positions: 12 rotary tools rotation speed: 0 � 3 000 rpm counter headstock type: MORSE 3 sleeve stroke: 30 mm tailstock vertical stroke: 100 mm dimensions: 2 300 x 2 335 x 2 045 mm weight: 5 000 kg

451

ID	MA35826
Make	Haas
Model	ST-15Y
YOM	2019
Condition	Good Condition
Photo	See Photo
Working hours: 2650 h Travel: � X: 200 mm � Y: +/- 51 mm � Z: 406 mm Swing diameter: � over front cover: 686 mm � over cross slide: 406 mm � over tailstock: 686 mm Spindle nose: A 2-6, Chuck diameter: 210 mm, Bar diameter: 63.5 mm, With chip conveyor JORGENSEN Turning length: 406 mm Turning diameter: 305 mm Tool changer positions: 12 Number of places for driven tools: 6 Spindle bore: 88,9 mm Cross slide � travel: +/- 51 mm Turning speed range: 4000 rpm

452

ID	MA35822
Make	Star
Model	SR20J
YOM	2017
Condition	Good Condition
Photo	See Photo
Spindle Hole Dia 20.0 Power 3.7 # Axis 8.0 Max.machining diameter �20mm(25/32in) Max.headstock stroke Bar diameter�2.5 (max.55mm) (max.2-11/64in) Number of turning tools 6 tools (□12mm) 4-spindle sleeve holder Number of tools Front : 4 tools Rear : 4 tools Max.drilling capability �10mm(25/64in) Max.tapping capability M8�P1.25 Power-driven att. Number of tools 5 tools Max.drilling capability �8mm(5/16in) Max.tapping capability M6�P1.0 Spindle speed max.8,000min-1 Drive motor 1.2kw Rapid feed rate 35m/min(X,Y,Z,XB,ZB) Main spindle indexing angle C-axis control Main spindle speed max.10,000min-1 Main spindle motor 2.2kw(Continuous) /3.7kw(15min./60%ED) Dimensions (W�D�H) 2,250�1,200�1,700mm Weight 2,200kg Power consumption 5.2KVA Backworking Attachment Max.chucking diameter �20mm(25/32in) Max.length for front ejection 80mm(3-5/32in) Max.work projection length 30mm(1-3/16in) 4-spindle backworking unit Max.drilling capability Stationary tool �8mm(5/16in) Power-driven tool �5mm(3/16in) Max.tapping capability Stationary tool M8�P1.25 Power-driven tool M4�P0.7 Sub spindle indexing angle C-axis control Sub spindle speed max.8,000min-1 Sub spindle motor 1.5kw(Continuous) /2.2kw(15min./50%ED) Equipped With Fanuc Series 31i -Model B Control Iemca IDEAL 325 Bar Feeder 4 Position Live Backworking Chip conveyor, Parts Conveyor, High Pressure Coolant

453

ID	MA35817
Make	Daewoo
Model	Puma300LB
YOM	2005
Condition	Good Condition
Photo	See Photo
Working hours: 15830 h Control: FANUC 21i-TB Nominal Power: 40.01 kVA Max Load: 18.5 kW Max C. 57.75 A Swing over bed: 570 mm Swing over saddle: 370 mm Max machining diameter: 400 mm Max work lenght: 1298 mm Draw tube diameter: 77 mm � X axis: 282 mm � Z axis: 1330 mm Chuck diameter: 255 mm Spindle speed range: 35 � 3.500 rpm Spindle nose ASA A2-8 Spindle bore diameter: 90 mm Bearing diameter: 130 mm Turret stations: 10 Tool height: 25 mm Boring bar diameter: 40 mm Indexing time: 0,1 sec FANUC 21i-TB Technical details Turning length: 1,298 mm Turning diameter: 570 mm Toolchanger positions: 10 Number of controlled axles: 2 Spindle bore: 90 mm Turning speed range: 35 � 3500 rpm Total power requirement: 18,5 kW

454

ID	MA35814
Make	Doosan
Model	PUMA300B
YOM	2007
Condition	Good Condition
Photo	See Photo
Nominal power: 40,01 kVA Max. load: 18,5 kW Full load current: 104,9 A Interrupt current: 17000 A Swing diameter over bed: 570 mm Swing diameter over support: 370 mm Turning length: 648 mm Bar passage: 77 mm X-axis travel: 282 mm Z-axis travel: 1330 mm Jaw chuck diameter: 255 mm Speed range: 35 � 2500 rpm Spindle nose: A2-8 Spindle bore: 90 mm With 10-fold tool turret Rapid traverse of X-axis: 20000 mm/min Rapid traverse of Z-axis: 24000 mm/min The machine is equipped with three-jaw chuck, one tailstock as well as tools which are mounted on tool turret With FANUC SERIES 21i-TB CNC control system With chip conveyor LLS TURBO, With oil dust extraction LTA

455

ID	MA35812
Make	Doosan
Model	LYNX220C
YOM	2008
Condition	Good Condition
Photo	See Photo
Working hours: 17920 h CNC control FANUC O-ITC Swing diameter over bed: 510 mm Over cross slide: 290 mm Collision-free diameter: 210 mm Largest turning diameter: 320 mm Machining length: 305 mm � X-axis: 175 mm (160 + 15) � Z-axis: 330 mm Main spindle clamping device diameter: 210 mm Spindle head form A 2-6 ASA Spindle bore diameter: 76 mm Bar diameter: up to 65 mm Drive power: 15/11 kW Spindle speeds: up to 4000 rpm Tool turret with 12 positions Tool cross-section � outside 25 x 25 mm � inside 40 mm diameter Comes with: � collet chuck � hinge chip conveyor � manual tailstock � operation via foot switch � automatic tool measurement � short bar loading magazine LNS QUICKLOAD SERVO 65 � additional 3-jaw chuck diameter 200 mm � parts collector � chip conveyor LNS

456

ID	MA35807
Make	Graziano
Model	SAG24
YOM	2011
Condition	Good Condition
Photo	See Photo
CNC: Fagor Hight center: mm 500 Lenght work: mm 3000 Diameter work: mm 1070 \ 1025\ 672 Power alimentation:380V 50 Hz Power motor:kw 36

457

ID	MA35803
Make	CMZ
Model	TC25Y/800
YOM	2012
Condition	Good Condition
Photo	See Photo
Working hours: 9900 h Basis Information: � swing diameter over bed: 920 mm � swing diameter over slide: 745 mm � distance chuck � tailstock: 898 mm Headstock: � rapid traverse X-axis: 30 mm � rapid traverse Z-axis: 30 mm � rapid traverse Y-axis: 15 mm Occupational exposure limit: � bearing diameter (outside): 170 mm � bearing diameter (inside): 110 mm � spindle nose: ASA 6�A2 � spindle bore: 73 mm � spindle opening in tow bar: 66 mm � drive power main spindle (max./ S6 40%): 35 kW /19 kW Counter spindle: � drive power max.: 16 kW � torque max.: 75 Nm Various: � capacity (coolant tank): 300 l � capacity (hydraulic tank): 10 l � capacity (lubricant tank): 2 l � power supply: 400 V, 50 Hz � 5% � ambient temperature max.: 35� C Comes with accessoires such as tool holders, tools as well as spare jaws Technical details: Turning length: 800 mm Turning diameter: 550 mm Control: FANUC Series 32i � MODEL B Toolchanger positions: 16 Number of places for driven tools: 16 Number of controlled axles: 4 Spindle bore: 73 mm Tool taper: VDI 40 Cross slide � travel: 315 mm Longitudinal slide -travel: 800 mm Turning speed range: 4,000 rpm Rapid travel range: 30 (X, Z, B), 15 (Y) m/min Total power requirement: 45 kW

458

ID	MA35799
Make	Mazak,Japan
Model	SUPER QUICKTURN(SQT)250 MY
YOM	2002
Condition	Good Condition
Photo	See Photo
With MAZATROL 640 T CNC-control Max. swing circle: 525 mm Standard machining diameter: 276 mm Max. machining diameter: 300 mm Max. diameter for bar work: 51 mm Distance between spindle nose and turret face 135 up to 710 mm Load capacity incl. chuck weight: 981/1472 N (chuck work/bar work) Speed: 35 to 5000 rpm Acceleration and deceleration time 2.5 sSpindle bore: 61 mm Motor: 18.5 kW Max. torque: 351 Nm Max. chuck diameter: 218 mm Travels: � X: 180 mm � Z: 575 mm � Y: 100 mm Rapid traverse X Y Z: 30/30/12 m/min Rapid traverse C: 400 rpm With 12-fold tool turret (driven) Tool size outer turning tool: 25 mm diameter Inner turning tool: 40 mm diameter Milling drill: max. 20 mm diameter Milling spindle: 25 to 4500 rpm Milling spindle motor: 3,7 kW With chip conveyor MAYFRAN Foot switch Jaw chuck diameter: approx. 270 mm Tailstock, incl. tool holders on the tool turret Documentation

459

ID	MA35798
Make	Mazak,Japan
Model	QuickTurn Nexus 200II-MSY
YOM	2014
Condition	Good Condition
Photo	See Photo
With LNS SPRINT 565 Bar Feeder Main spindle 8� Maximum workable diameter �675 mm Machining diameter �276 � max �380, speed 35-5000 rpm, power 26 kW 6� secondary spindle, speed 35-6000 rpm, motor power 11 kW Distance between spindle jaws 5-580 mm 12-tool turret (motorized) Feeding axis strokes: � X: 230 mm � Y: 100 mm � Z: 575 mm � W: 585 mm Included accessories: � 1x PINTO chuck quick change collet holder with collets (D.25 D.30 D.35) for mounting on 1st and 2nd spindle with adapter flange � 3x Radial driven tools � 2x Axial driven tools with CAPTO C4 shank � 24x Pliers holder CAPTO C4 � 3x Double axial driven tools � 1x Spring tailstock FBR � 6x Complete Bar Feeder Channels (sizes 16-26-31-46-65) � 1x Additional lamp

460

ID	MA35795
Make	MAZAK
Model	INTEGREX200-2J
YOM	2002
Condition	Good Condition
Photo	See Photo
CNC control MAZATROL TRAVELS : X: 580mm Y: 160mm Z: 1.045mm B: 225� max. turning diameter 660 mm max. turning length 995 mm Main spindle max. spindle speed 5,000 rpm Counter spindle max. spindle speed 6,000 rpm Milling spindle max. Spindle speed 12,000 rpm KM-63 tool holder Tool changer with 40 tool places chip conveyor 5-axis simultaneous machining

461

ID	MA35752
Make	Pinacho
Model	MUSTANG225
YOM	2002
Condition	Good Condition
Photo	See Photo
Control: Fagor 8055, Baruffaldi 8 station turret, Swing over the bed: 450 mm diameter, Swing over cross slide: 260 mm diameter, DBC Turning Length: 1150 mm, Spindle speed: 3000 rpm, Spindle bore: 65 mm, Hydraulic tailstock

462

ID	MA35748
Make	Colchester
Model	2000L
YOM	1995
Condition	Good Condition
Photo	See Photo
Control: Fanuc O-T, Swing over bed: 420 mm diameter, Swing over carriage: 297 mm diameter,. Maximum turning length: 350 mm, Collet Chuck, 3 Jaw Chuck,. 12 Station Turret,. Bar capacity: 52 mm.diameter, Maximum spindle speed: 6000 rpm. Tailstock. Manuals, Weight: 2400 kg. Barfeeder.

463

ID	MA35747
Make	Colchester
Model	2000L
YOM	1985
Condition	Good Condition
Photo	See Photo
Control: Fanuc OT, Maximum turning diameter: 15", Distance between centres: 40", Spindle speeds: 20 - 2750 rpm, Quick change tool post, 3 Jaw Chuck, Coolant,

464

ID	MA35746
Make	Colchester
Model	2000L
YOM	1990
Condition	Good Condition
Photo	See Photo
Control: Fanuc OT, Maximum turning diameter: 15", Distance between centres: 40", Spindle speeds: 20 - 2750 rpm, 8 station turret, 3 Jaw Chuck, Coolant,

465

ID	MA35742
Make	Sunfirm
Model
YOM	2006
Condition	Good Condition
Photo	See Photo
Bed Width 26" Distance Between Centers 160" Gap Width 22" Max Swing Over Bed / Carriage / Gap 42" / 27" / 55" Rapid Traverse Rates (X / Z) 393 / 315 IPM Spindle Bore 7" Spindle Motor 35 / 30 HP Tailstock Taper MT#6 Tools 8 X-Axis Travel 26" Features: Fanuc 0i-TC CNC Control 7" Color LCD Manual 24" 4-Jaw Chuck (8) Position Turret Manual Tailstock Chip Conveyor Spindle Chiller Unit

466

ID	MA35741
Make	Miyano
Model	BNC-34T
YOM
Condition	Good Condition
Photo	See Photo
Max Bar Capacity.... 1-5/16" Max Swing over the Cross Slide... 10.62" Max Part Length.... 7-7/8" Max Turning Diameter.... 4-3/4" Cross Travel (X-Axis).... 3-7/8" Longitudinal Travel (Z-Axis)... 11-3/8" Number of Turrets.... 2 Turret Positions.... 6 Each Spindle Speed Range.... 170-5000 RPM Spindle Drive Motor.... 10 HP Approximate Machine Dimension(w/o Barfeeder).. 59" x 100" Approximate Machine Height... 67" Approximate Machine Weight... 6,200 LBS EQUIPPED WITH: Fanuc OT-C CNC Control with CRT, RS232 Port for DNC System, Spindle Load Meter, (2) 6 Station Turrets, Programmable End Working Turret Provides 3 Axis Simultaneous Cutting Capability, Barfeeder, Programmable Part Catcher w/ Parts Conveyor, Heavy Duty Slant Bed Construction, Chip Conveyor, Coolant System.

467

ID	MA35734
Make	Colchester
Model	TORNADO T2
YOM	2007
Condition	Good Condition
Photo	See Photo
Control: Fanuc 21i-TB (conversational Manual Guide i) controls - No ISO programming knowledge required. 2 Axis machine, Colchesters "Duo-Stable" bed, Automatic constant surface speed machining. 30mm VDI 12 station Turret, 10.4" colour LCD display, Swing over bed: 410 mm, Max Turn Dia: 170 mm, Spindle Bore: 46 mm, Chuck Size: 170/125 mm, Motor power: 5.5 kw, Parts catcher & removable parts tray. MBF 1000T magazine bar feed (Can hold 1m cut bars) Capacity Dia: 6-42 mm, Machine is suitable for 24/7 lights out production if needed. Also included is a range of tooling (not shown in pics) Soft jaws, VDI tool holders, VDI boring bar holders, VDI Collect drill holders, VDI blank plates, Sandvik tips and lots of other small tools etc.

468

ID	MA35729
Make	Star
Model	SR32J
YOM	2010
Condition	Good Condition
Photo	See Photo
Max. machining diameter: .. 32mm (1-1/4in) Max. headstock stroke .. 80mm(3-5/32in) Tool shank: ... 16mm x 95-155mm 4-spindle sleeve holder - Max. drilling capability: .. 13mm(1/2in) - Max. tapping capability: . M12xP1.75 - Max. die cutting capability: . M10xP1.5 Power Driven attachment - Max. drilling capability: .. 8mm(5/16in) - Max. tapping capability: . M6xP1.0 - Max. milling capability: . 10mm(25/64in) Main spindle speed: .. max.7,000min-1 Main spindle motor(continuous/30min): . 5.5kw/7.5kw Power-driven att. spindle speed: . max.5,000min-1 Power-driven att. drive motor: . 1.0kw Backworking Attachment Max. chucking diameter: .. 32mm (1-1/4in) Max. length for front ejection: . 125mm(4-59/64in) Max. parts projection length: . 45mm(1-49/64in) 4-spindle backworking unit - Max. drilling capability - - Stationary tool: .. 13mm(1/2in) - - Power-Driven tool: .. 6mm(15/64in) - Max. tapping capability - - Stationary tool: .. M10xP1.5 - - Power-Driven tool: .. M5xP0.8 Sub spindle speed: .. max.7,000min-1 Sub spindle motor(continuous/15min): . 2.2kw/3.7kw Dimension (L x W x H, Approx): . 9' x 4' x 5'6" Weight (approx): ... 8300 lbs EQUIPPED WITH: Fanuc 18iTB CNC Control FMB Turbo 3-36 Barfeeder High Pressure Coolant System Chip Conveyor Parts Conveyor Ran Oil

469

ID	MA35725
Make	Jupiter
Model
YOM
Condition	Good Condition
Photo	See Photo
SECOND OPERATION LATHE 3 JAW CHUCK - BAR PASSAGE 70 MM. DISTANCE BETWEEN CENTER 1700 MM CNC SIEMENS SINUMERIK 840D

470

ID	MA35721
Make	Comau
Model	CKN1
YOM
Condition	Good Condition
Photo	See Photo
CNC: NUM 750 TABLE 800 MM MAX TURNING DIAM 900 MM

471

ID	MA35720
Make	Goodway
Model	GCL2L
YOM	1996
Condition	Good Condition
Photo	See Photo
Maximum length to be turned 600 mm Maximum diameter to be turned 290 mm Maximum diameter over the bed 400 mm Diameter above the trolley 280 mm Distance between centers 600 mm Type of CNC Fanuc 0T Axis x 135 mm Y-axis 340 mm Spindle connection A2-6 Spindle lift 52 mm Number of turrets 8 Number of tools on the turret 8 Variable rotation speed 4500 rpm Spindle motor power 15 kW Weight 3000 kg Length x width x height 2050.0 � 1290.0 � 1650.0

472

ID	MA35718
Make	Biglia
Model	B501S
YOM	1997
Condition	Good Condition
Photo	See Photo
MAX DIAMETER WORKABLE FROM BAR: 68 mm MAX WORKING DIAMETER FROM SHOOTING: 250 mm MAX WORKABLE LENGTH: 500 mm MAX ROTATING DIAMETER: 520 mm MAIN SPINDLE VARIABLE ROTATION RANGE: 4,000 RPM SPINDLE NOSE: ASA 6 SPINDLE HOLE: 80 mm BEARING INNER DIAMETER: 110 mm SELF-CENTERING DIAMETER: 210-250 mm MOTOR POWER: 26 Kw VARIABLE ROTATION COUNTERTESTAGAMMA: 4000 rpm SPINDLE NOSE: ASA 5 MAANDRINO HOLE: 52 mm USEFUL THROUGH HOLE: 43 mm INNER BEARING DIAMETER ANT:80 mm SELF-CENTERING DIAMETER: 165 mm MOTOR POWER: 7,5 Kw CNC: FANUC SERIES 18i- DIMENSIONS AND OVERALL WEIGHT WITH CHIP CONVEYOR 4 X 1.9 X 1.9 m WEIGHT WITH CHIP CONVEYOR 4900 Kg

473

ID	MA35715
Make	Miyano
Model	BNE64SY2
YOM	2004-06
Condition	Good Condition
Photo	See Photo
Control: FANUC 18i-TB, S1 chuck size: 8", S1 spindle speed: 4000 rpm, S1 X-Axis travel: 412 mm, S1 Z-Axis travel: 989 mm, S1 Y-Axis travel: 40 mm, Turret 1: 12 stations (Servo Live), S2 chuck size: 10", S2 spindle speed: 5000 rpm, S2 X-Axis travel: 412 mm, S2 Z-Axis travel: 989 mm, S2 B-Axis travel: 1062 mm, Turret 2: 12 stations (Servo Live), Chip conveyor + bucket, 14x Live Tool Holder, 3x ID OD Tool Holder, 15x OD Tool Holder, 18x ID Tool Holder, 2x Cutting Tool Holder, No CE mark.

474

ID	MA35714
Make	DMG MORI
Model	CTX-310
YOM	2009
Condition	Good Condition
Photo	See Photo
Control CNC 3D: Siemens 810D POWERLINE), 3 Axis machine, C-Axis, Bar capacity: 50.8 mm, Chuck: VDI 30, Chuck size: 210.82 mm, Maximum turning diameter: 200.66 mm, Swing diameter: 330.2 mm Maximum length: 450.09 mm, Spindle speed: 5000 rpm, Power: 16.4 kW, Tailstock, Live tooling, Tool Presetter, Chip Conveyor, Some tool holders & 2 Rotary tools, AXIAL & RADIAL, Dimensions (wxd): 98.4 x 59.2", Weight: 3500 kg Very clean well maintained

475

ID	MI8208
Make	Daewoo
Model	Puma300M
YOM	2001/08
Condition	Good Condition
Photo	See Photo
SWING OVER BED : 590 mm MAX. TURNING DIA. : 355 mm CHUCK DIA : 255 mm SPINDLE SPEED : 3500 rpm SPINDLE NOSE : A2 8 MAX. TURNING LENGTH : 583 mm CONTROL : FANUC- 18i- T

476

ID	MI8207
Make	Daewoo
Model	Puma230
YOM	1999
Condition	Good Condition
Photo	See Photo
MACHINING DIA. 255 mm WORKING LENGTH 548 mm SWING OVER BED 510 mm SPINDLE NOSE A2-8 SPINDLE BORE 90 mm SPINDLE SPEED 3500 rpm CONTROL FANUC- 18T

477

ID	MI8206
Make	Doosan
Model	Puma230M
YOM	08/2002
Condition	Good Condition
Photo	See Photo
MACHINING DIA. : 255 mm WORKING LENGTH : 548 mm SWING OVER BED : 510 mm SPINDLE SPEED : 3500 rpm CONTROL : FANUC- 18i-T

478

ID	MI8205
Make	Daewoo Puma
Model	Puma 300MB
YOM	12/2003
Condition	Good Condition
Photo	See Photo
MAX. TURNING DIA. : 355 mm MAX. TURNING LENGTH : 583 mm POWER AC MOTOR : 18 KW NO. OF TOOLS : 12 SPINDLE SPEED : 3500 rpm CONTROL : FANUC- 21i-TB

479

ID	MA35689
Make	Mazak,Japan
Model	MULTIPLEX 630
YOM	1990
Condition	Good Condition
Photo	See Photo
Control: Mazatrol T plus With robot, Gantry loader, C axis

480

ID	MA35688
Make	Dugard
Model	T8
YOM	2014
Condition	Very good condition
Photo	See Photo
Control: Mitsubishi M700 Main spindle: X Z C, Sub Spindle: X Y Z C B

481

ID	MA35682
Make	MAZAK
Model	SQT10
YOM	1993 abt
Condition	Good Condition
Photo	See Photo
Control: Mazatrol T32B, Maximum turning diameterL 340 mm, Maximum turning length: 650 mm, Spindle bore: 52 mm, Collet chuck, Turret: 12 station, Tool eye, Chip conveyor, Sameca Multisam 12.65 magazine bar loader, Selections of tool holders and multibore collets, Manuals, Machine weight: 3600 kg,

482

ID	MA35680
Make	Clausing
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
70� x 133� Clausing Flat Bed CNC Lathe 45� Chuck Diameter 70� Swing Over Bed 53� Over Cross Slide 133" Center Distance 9� Hole Though Spindle speed 4-1000 rpm 50hp. Motor Dual Chip Conveyor 2, Steady Rest Programmable Tail Stock Fanuc 0i-TF

483

ID	MA35679
Make	Sunfirm
Model	MAXTEC CST42160
YOM	2006
Condition	Good Condition
Photo	See Photo
Bed Width 26" Distance Between Centers 160" Gap Width 22" Max Swing Over Bed / Carriage / Gap 42" / 27" / 55" Rapid Traverse Rates (X / Z) 393 / 315 IPM Spindle Bore 7" Spindle Motor 35 / 30 HP Tailstock Taper MT#6 Tools 8 X-Axis Travel 26" Features: Fanuc 0i-TC CNC Control 7" Color LCD Manual 24" 4-Jaw Chuck (8) Position Turret Manual Tailstock Chip Conveyor Spindle Chiller Unit

484

ID	MA35678
Make	UTITA
Model	T450/CN
YOM
Condition	Good Condition
Photo	See Photo
Height 350 mm. Distance between centers 3.000 mm. � 450 mm on the bandwagon. � over bed 700 mm. Spindle motor power 37 Kw. Spindle speeds 28 to 2,240 RPM. Rapid traverse 12,000 mm / min. Feed range 0 to 7,000 mm / min. Total Weight 16 Tons. CNC CONTROL OSAI

485

ID	MA35668
Make	Yang
Model	ML25A
YOM
Condition	Good Condition
Photo	See Photo
Work capacity: Swing over bed: 550 mm, Max. machining dia : 280 x 520 mm, Swing over saddle: 350 mm, Max. distance bet. center: 600 mm, Bed Bed inclination: 45 degree Max. logitudinal travel: 520 Z axis feed motor: Fanuc AC Servo motor 10S Rapid feed of Z axis: 12 m/min Max. cross travel: 216 X axis feed motor: Fanuc AC servo motor 5S 0.9 kw (1.2 HP) Rapid feed of X axis: 20m/min Spindle: Front bearing bore: 110 mm, Thru hole dia/thru br dia: 77/D52 Spindle nose no: AA JIS A2-6 Taper of spindle bore: MT NO.7 Spindle drive motor: Fanuc AC spindle motor 8S 7.5 kw/11 kw (cont/30 min) Spindle speed: 45~4500 rpm, Tailstock speed: Diameter of tailstock spindle: 85 mm, Quill travel: 15 Taper of quill: MTNo.5 Tailstock travel; 449 Turret: type: Veryical octagonal Drive motor Motor of cooling system: 180 w Motor of hydraulic system; 1.5 kw (2 HP) Motor of centralized lubrication system: 17 w Recirculating motor: 370 w (1/2 HP) Chip conveyor motor: 90w Height from floor to spindle center line: 1000 General description Height from bed to spindle center line: 295 occupied are (len x wid): 3665 x 2536 Outline dimensions: 4000 x 2000 x2220 Net weight: 4500 kgf Cross weight: 5000 kgf Another specification 1) 12 pcs turret 2) VDI 8 pcs turret 3) VDI 12 pcs turret

486

ID	MI8183
Make	Wintec,Taiwan
Model	TC35L
YOM
Condition	Good Condition
Photo	See Photo
Capacity - TC-35L Max Swing over bed... 660mm(25.9) Swing over cross slide.480mm(18.9) Between center..1640mm(64.6) Max. Cutting dia..550mm(21.6) Max. Cutting Length..1530mm(60.2) Feed & travel . X-axis travel.. 315mm(12.4) Z-axis travel..1605mm(63.2) X-axis rapid traverse.12000mm(472.4)min Z-axis rapid traverse.15000mm(590.6)min MPG ...0.001mm/0.01mm/0.1mm Manual Feed(X.Z).. 1260mm(49.6)min Spindle Speed range..25-2500 Nose ...A2-8 Bore ...102mm(4) Bore through draw bar. 92(3.6) Min.C-axis indexing -------- Bearing Dia... 160mm(6.3) Turret No. of Tools...Q.ty 12 Tool shank... 25mm(1.0) Boring bar... 50mm(2.0) indexing time.. 1.0 sec Live tooling spindle speed. Tailstock Travel...1456mm(57.3) min Quill dia...110mm(4.3) Taper...MT-5# Quill travel...100mm(3.9) Motors Spindle motor...AC 30/22 KW X-axis servo...AC1.8 KW Z-axis servo...AC 2.8 KW C-axis motor... Live tooling motor... Override Consumption.. 46KVA Coolant Capcity ... 130 Litres Dimension floor space required. 4725*1840 &weight Weight... 10000 kg

487

ID	MA35631
Make	Doosan
Model	PUMA TT1800SY
YOM	2010/09
Condition	Good Condition
Photo	See Photo \| See Video
1. CAPACITY Max. distance between spindle nose : 980mm Swing Over Saddle : 230mm Recommended turning diameter : 210mm Max. turning diameter On upper turrer : 230mm Max. Working Lenght left/right spindle : 230mm Bar Working diameter : 65mm 2) Main Spindle Chuck size : 210mm Spindle Nose : A2#6 Spindle diameter (front) : 110mm Spindle Through hole : 76mm Bore Of draw tube : 66mm Main Spindle Motor Power Fanuc aB160s/1,3000i(Buite) : 22/15 Max. Spindle Speed : 5,000 Max Spindle torque : 208N.m 3.UPPER TOOL POST. No. of tool station : 12[24]* OD tool size : 20 x 20mm Boring bar size : 32mm Rotary Tool spindle motor /fanuc 15/10,000i : 5,000mm Rotary tool spindle torque : 47N.m Turret index time : 0.15sec 4. LOWER TOOL POST No. of tool station 12[24]* OD tool size : 20mm x 20mm Boring bar size : 32mm Rotary Tool spindle motor /fanuc 15/10,000i : 5,000mm Rotary tool spindle torque : 47N.m Turret index time : 0.15sec 5.CARRIAGE Travel distance X1-axis 165 X2-axis 190mm Z1-axis 700mm Z2-axis 720kW Y-axis 100(+-50) B-axis 770 N.m C1,C2-axis 36.0(0.001)deg Rapid Traverse X1,2 axis 20m/min Z1,2 axis 40m/min Y -axis 7.5 m/min B - axis 40m/min C1,2 axism/min Ball screw diameter x lead X1-axis 32x8mm X2-axis 32x10mm Z1-axis 32x12mm Z2-axis 32x12mm Y-axis 32x10mm B-axis 32x12mm Servo motor X1 axis 3.0kW X2 axis 1.6kw Z1 axis 2.7kW Z2 axis 2.7kW Y axis 1.6kW B axis 1.6kW 6. BED & SADDLE Slant angle : 45mm Guide ways span Bed (Z1 axis) 414mm Bed (Z2 axis )339mm Saddle (X1 axis) 240mm Saddle (X2 axis) 240mm 7. POWER SOURCE Electric power supply 68.4kVA 8.MACHINE SIZE Height from floor to spindle center 1150mm Std M/C dimension (Lenght x width)3905 x 2070mm Machine height 2080mm Net weight of the machine 7800kgf

488

ID	MA35630
Make	WFL Voest Alpine
Model	M30
YOM
Condition
Photo	See Photo
Length 1050� �520� CNC Siemens bore77�mm 5000�rpm motor power22

489

ID	MI8144
Make	Kinwa
Model	CL38
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control fanuc 21iMB Swing over bed 660 mm Swing over cross slide 370 mm Distance between centers 4385 mm Width of bed 460 mm Stroke X - axis 540 mm Z - axis 4170 mm Spindle Spindle bore φ 120 mm ( A2 - 11, 6 ~ 1600 rpm ) φ 186 mm ( A2 - 15, 3 ~ 1000 rpm ) Number of spindle speed range 2 Turret OD tool shank V 8 : □ 25 mm H 4 : □ 32 mm ( Option ) ID tool shank ( Max. ) V 8 : φ 40 mm H 4 : φ 50 mm ( Option ) H 6 : φ 50 mm ( Option ) Feed traverse X - axis 10 m / min Z - axis 10 m / min Tailstock Tailstock stroke 220 mm Quill diameter 150 mm Quill tpaer MT # 5 Motor Main motor (30 min.) αP 40 i ( 30 HP / 25 HP ) Servo motor X : α 12 is ( 3.6 HP ) Z : α 22 is ( 5.4 HP ) Hydraulic unit motor 2 HP Coolant pump motor 1 HP Machine dimension Length of machine 5335, 5790, 6290, 6940, 8370 mm Width of machine 2313 mm Height of machine 2000 mm Weight of machine 6400, 6800, 7400, 8400, 10100 kg

490

ID	MA35596
Make	Gildemeister,Germany
Model	CTX410
YOM	2004
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size .. 10" Max Diameter Bar Capacity . 2.6" Max Swing Over Bed / Carriage . 19.882" / 14.37" Max Turning Diameter . 12.598" Max Machining Length . 23.62" Turret ... 12 Station VDI 30 Spindle Speed .. 25 - 4000 RPM Spindle Bore .. 3.1" Spindle Nose .. A2-8 Spindle Motor .. 28.14 HP Rapid Traverse Rates (X / Z) . 944 / 1181 IPM X-Axis Travel .. 9.843" Z-Axis Travel .. 25" Tailstock Taper .. MT#4 Tailstock Travel .. 22.835" Approx. Weight .. 10,500 lbs. Machine Dimensions (L x W x H) 126.4" x 68.9" x 68.9" Machine Weight 11,660 lbs. EQUIPPED WITH: - FANUC 21iTB CNC CONTROL - TOOL SETTER - 10" 3-JAW HYD. CHUCK - 12 STATION VDI 30 TURRET - TAILSTOCK - CHIP CONVEYOR - ALL AVAILABLE TOOLHOLDERS - ALL AVAILABLE MANUALS

491

ID	MA35582
Make	Mori Seiki
Model	SL250
YOM	1998
Condition	Good Condition
Photo	See Photo
Power Tooling Capable : Yes B Axis : Yes Y Axis : Yes Bar Feeder : Yes Swarf Conveyor : No Extraction Unit : Yes The condition of the machine is currently in a non-usable state. The Service Provider has removed the Turret to carry out investigations regarding the required repair of Components that need replacing within the Turret.

492

ID	MI8119
Make	Voestalpine
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
fanuc controller and servo motors and drives 800 mm diameter 2000 mm length for sale please 18 ton machine weight extremely heavy duty with live tool turret

493

ID	MA35550
Make	Okuma,Japan
Model	L300M
YOM	2016
Condition	Good Condition
Photo	See Photo
Specificatons: Max Swing Over Slant Bed 20.47" Max Swing Over Cross Slide 14.57" Max Distance Between Centers 20" Maximum Cutting Diameter 11.81" Maximum Turning Length 17.7" Chuck Size 10" Kitagawa Cross Travel (X-Axis) 9.25" Longitudinal Travel (Z-Axis) 20.47" Rapid Traverse Rate 787 IPM Number of Turrets 1 Turret Positions 12 Spindle Nose A2-8 Spindle Bore 3.15" Bar Capacity 3" Spindle Speed 25-3000 RPM Spindle Drive Motor 15 HP Milling Spind Speed 100-4500 RPM Miling Spindle Motor 9 HP Electrics 230/3/60 Approximate Machine Dimension 70" x 100" Approximate Machine Height 68" Approximate Machine Weight 9000 LBS Equipped With: OSP 300L Control 10" Kitagawa Chuck Chip Conveyor Full standard package of Live and Static Tool Holders Comments: 1657 cutting hours Cutting Mild Steel It has had a PM every year since, and it is in great condition, runs most days

494

ID	MI8096
Make	Yang
Model	ck5
YOM
Condition	Good Condition
Photo	See Photo
Chuck size : 300mm Between : 1100mm Control : Fanuc OT Diameter of spindle bore : 102mm

495

ID	MI8072
Make	Okuma,Japan
Model	LB15 II
YOM
Condition	Good Condition
Photo	See Photo \| See Video
FANUC OI TF plus Chuck 250 dia X axis travel 350mm Z axis travel 500 mm Tailstock SERVO TURRET 12 STATION Spindle A 2 8 Spindle motor 15 kw SPINDLE RPM 3500

496

ID	MA35538
Make	Haas
Model	CL-1
YOM	2020
Condition	Good Condition
Photo	See Photo
Swing diameter over the cross slide: 279 mm, Swing diameter over the table: 126 mm, Maximum cutting diameter: 126 mm, Bar capacity: 25 mm, X-Axis travel: 305 mm, Z-Axis travel: 203 mm, Spindle nose: 5C Collet type, Maximum spindle speed: 6000 rpm, Spindle bore: 31.8 mm, Main spindle C-Axis: 0.001 degrees. Tooling: Gang style - any combination. CL1 bar feeder.

497

ID	MA35529
Make	Okuma,Japan
Model	LB15
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: OKUMA OSP-5020L CNC CONTROL 152 MM 3-JAW CHUCK 12-STATION TURRET TAILSTOCK CHIP CONVEYOR SMW MAGAZINE TYPE BAR FEED SPECIFICATIONS: SWING OVER BED 400 MM MAX. TURNING DIAMETER 250 MM MAX. WORK LENGTH 500 MM DISTANCE BETWEEN CENTERS 520 MM CROSS SLIDE TRAVEL (X-AXIS) 130 MM + 45 MM LONGITUDINAL TRAVEL (Z-AXIS) 520 MM THRU-SPINDLE BORE CAPACITY 45 MM SPINDLE SPEED RANGE (2) RANGES 57-4000 RPM SPINDLE DRIVE MOTOR 15 HP RAPID TRAVERSE 472 IPM CUTTING FEED RATE .0001 - 40 IPR APPROXIMATE FLOOR SPACE 1854 MM X 2743 MM APPROXIMATE WEIGHT 9,900 LBS. ELECTRICS 220/440V, 60HZ, 3PH EQUIPPED WITH: OKUMA OSP-5020L CNC CONTROL 12-STATION TURRET 152 MM 3-JAW CHUCK MIST COLLECTOR TAILSTOCK HENNIG CHIP CONVEYOR SMW MAGAZINE TYPE BAR FEED

498

ID	MA35524
Make	Mori Seiki
Model	SL-25M5
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC CNC CONTROL 12-STATION TURRET LIVE MILLING 254 MM 3-JAW CHUCK TAILSTOCK SPECIFICATIONS: SWING OVER BED - 521 MM SWING OVER CROSS SLIDE - 351 MM DISTANCE BETWEEN CENTERS - 625 MM STANDARD MACHINING DIAMETER - 231 MM MAXIMUM MACHINING LENGTH - 551 MM X-AXIS TRAVEL - 284 MM Z-AXIS TRAVEL - 589 MM MAIN SPINDLE SPEED - 35 -3500 RPM SPINDLE NOSE - A2-6 SPINDLE BORE - 79 MM MILLING SPINDLE SPEEDS - 80 - 2000 RPM RAPID FEED RATE, X-AXIS - 472.4 IPM RAPID FEED RATE, Z-AXIS - 590.6 IPM TAILSTOCK TRAVEL - 536 MM TAILSTOCK QUILL DIAMETER - 84 MM TAILSTOCK QUILL TRAVEL - 79 MM TAILSTOCK QUILL TAPER - MT#3 MAIN MOTOR - 20 HP MILLING SPINDLE MOTORN - 5 HP APPROXIMATE FOOTPRINT - 3048 MM X 1651 MM APPROXIMATE WEIGHT - 10,000 LBS EQUIPPED WITH: FANUC CNC CONTROL 254 MM 3-JAW CHUCK 12-STATION TURRET LIVE MILLING TAILSTOCK TURBO CHIP CONVEYOR ROYAL FILTERMIST MIST COLLECTOR

499

ID	MA35518
Make	Hardinge
Model	Conquest CS-GT
YOM
Condition	Good Condition
Photo	See Photo
Control: Fanuc 18-T CNC control, Spindle capacity (5C collet chuck), X-Axis travel: 303 mm, Z-Axis travel: 281 mm, Maximum spindle speed: 6000 rpm, Spindle motor: 3.7 kW, Machine Dimensions (LxDxH approx.): 1800 x 1500 x 1650 mm, Weight (approx.): 3000 kg, No Tooling. Magazine bar loader

500

ID	MA35511
Make	Mazak,Japan
Model	Integrex 200IIIS
YOM	2004
Condition	Good Condition
Photo	See Photo
SPECIFICATIONS B-AXIS ROTATION - 225 Degrees SPINDLE BORE - 2.99� SPINDLE NOSE- A2-6 SPINDLE SPEED - 35 - 5000 RPM MAX. SPINDLE TORQUE- 258 ft. lbs. SUB SPINDLE BORE - 2.99� SUB SPINDLE MOTOR - 25 HP SUB SPINDLE SPEED - 35 - 5000 RPM SUB SPINDLE TORQUE - 241 ft. lbs. X-AXIS TRAVEL - 22.83� Y-AXIS TRAVEL - +/- 3.15� Z-AXIS TRAVEL - 41.14� RAPID TRAVERSE (X/Y/Z) - 1496 / 1024 / 1496 IPM MILLING MOTOR - 12,000 RPM C-AXIS INDEX - .0001 Degrees (Main & Sub Spindle ) DISTANCE BETWEEN SPINDLES - 41.14� MAIN MOTOR - 30 / 20 HP MAX BAR DIAMETER - 2� MAX MACHINING LENGTH - 40� MAX SWING OVER BED -26" MAX TOOL DIAMETER - 3.54� / 4.92� MAX TOOL LENGTH - 15.7� MAX TOOL WEIGHT - 22 lbs. MAX TURNING DIAMETER - 26� (Chucking)

501

ID	MA35505
Make	MAZAK
Model	Integrex 400-IIIS
YOM	2006
Condition	Good Condition
Photo	See Photo
Chuck Size 12 in 304.80 mm Swing 33.5 in 850.90 mm Turning Diameter 30 in 762.00 mm Turning Diameter Lower Turret 16.5 in 419.10 mm Center Distance 60 in 1,524.00 mm X Axis Travel 24.8 in 629.92 mm Z Axis Travel 62.41 in 1,585.21 mm X2 Travel 9.06 in 230.12 mm Z2 Axis Travel 60.24 in 1,530.10 mm Y Axis Travel 9.06 9.06 B Axis Head Tilt 225� 225� W Axis Travel 60.24 in 1,530.10 mm C1/C2 Axis Index 0.001� 0.001� Y Axis (Yes / No) yes yes Spindle Nose A2-8 A2-8 Spindle Speed 3,300 rpm 3,300 rpm Main Motor 40 hp 40 hp Sub Spindle Chuck Size 10 in 254.00 mm Sub Spindle Speed 4,000 rpm 4,000 rpm Sub Spindle Motor 35 hp 35 hp Live Milling (Yes / No) yes yes Live Tooling Spindle Taper KM KM Live Tooling Speed 12,000 rpm - Milling Spindle 12,000 rpm - Milling Spindle Live Tooling Motor 25 hp 25 hp Turret Capacity 9 9 ATC Capacity 40 Station Tool Changer 40 Station Tool Changer Tailstock (Yes/No) no no Weight 31000 lb 14,061.35 kg EQUIPPED WITH Mazatrol 640MT Pro Control Chip Conveyor Coolant Tank & Pump Tool Presetter 40 Station Tool Changer KM Milling Spindle Coolant Thru Milling Spindle Lower Turret w/9 Stations

502

ID	MI8053
Make	Ikegai,Japan
Model	TU26
YOM
Condition	Good Condition
Photo	See Photo
Controls: Fanuc 18-T CNC Control Chuck size : 10" Kitagawa B-10 3 Jaw Chuck Max Swing Over Bed: 500 mm Max Turning Diameter: 470 mm Center distance : 700 mm Bar Capacity: 76 mm Spindle Bore: 87 mm Other Features : Main Motor : AC15/11kw Two Speed Gear Box - Low Speed High Torque 0-800 RPM and High Speed Regular Torque 0-4,000 RPM. Spindle Nose: A2-8 Highly rigid slant bed Highly rigid 4-way bed 12 Postition Turret Fast Forwarding speed : X axis-20m/min, Z-axis 24m/min Employed front drawer-type chip bucket Equipped with : Turbo Conveyor Machine manuals

503

ID	MI8038
Make	Colchester
Model	Storm80
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck size : 6.5 inch Hydrolic Chuck 12 station automatic turret Max. Turning Dia : 177 mm Max. Turning Length : 350 mm Max Bar capacity : 42 mm Swing over Bed : 420 mm spindle nose : A2-5

504

ID	MA35461
Make	EMI MEC
Model	Microsprint 50
YOM
Condition	Good Condition
Photo	See Photo
Bar Capacity: 2� (50mm). Six station turret, Two Vertical Slides, Two Horizontal Slides, Bar Feed Electric Motor Driven (takes 10ft single bars), Coolant, 3 Phase Electrics, Large qty of tooling

505

ID	MA35456
Make	KDM
Model	KTM16/20
YOM	2012
Condition	Complete,working condition
Photo	See Photo
Control : Fanuc 32i-MA Table Dia. 1600 mm Speed - 1 ~ 21 ~ 63 rpm (low) 4 ~ 85 ~ 250 rpm (high) Max. load capacity 10 tons Cross roller bearing Indexing (C-axis) 0.001 deg. Swing dia. 2000 mm Min. swing dia. 340 mm Distance from table to tool holder 1750 mm Distance from table to milling spindle end 1643 mm Cross rail Travel (U-D) 750 mm - 250 mm x 3 steps Ball screw Ram head Size 240 x 240 mm X - travel (L-R) -250 ~ +1780 mm Z - travel (U-D) 1000 mm Milling head 2000 rpm Ball screw - X, Z Machine Weight : 40 tons

506

ID	MI7996
Make	Mazak,Japan
Model	Integrex30y
YOM	1994-1997
Condition	Good Condition
Photo	See Photo
Chuck size: 10" Max. diameter bar capacity: 3.0" Max. swing over bed carriage: 20*5/15.75' Max. turning diameter: 20" Max. machining length: 60.2" Spindle motor: 35/30 HP AC Spindle speed: 35-3500 RPM, Spindle bore: 3.46" Spindle nose: A2-5 Tool: 40/80 Rapid traverse rates (X/Y/Z): 472/393/708 IPM, X axis travel: 11.81" Z axis travel: 62" Y axis travel: +/-3.54" C axis index: 001 degrees, Milling motor: 10 HP AC Milling speed: 15.6000 RPM Tailstock taper: MT #4 Machine dimensions (L x W): 253.7" x 103" Machine weight: 19000 lbs Features Mazatrol T plus CNC control 14" colour CRT C & Y axis milling capability Conversational programming EIA/ISO input function Graphics display 10" Hydraulic chuck 40/80 tool magazine 60" Turning length Programmable tool eye Programmable tailstock body and quill Chip conveyor Multi-tap transformer.

507

ID	MA35392
Make	MAZAK
Model	Slant Turn 28N ATC
YOM
Condition	Good Condition
Photo	See Photo
Swing Over Bed : 16.5" Maximum Cutting Length : 60" X Axis Travel : 13.19" Z Axis Travel : 60.55" C Axis Indexing : 0.001 DEG Spindle Speeds : 12 - 3000 RPM Spindle Motor : 25 HP Spindle Nose : A2-6 Spindle Bore : 2.2" Live Tooling Speeds : 20 - 2000 RPM Live Tooling Motor : 5 HP OAD (APPROXIMATE) : 173"X 78"X 103" High Weight ( APPROXIMATE): 11,000 LBS. EQUIPPED WITH : Mazatrol T-32-3 CNC Control 3-JAW Chuck Tailstock 16 Station ATC Tool Prestter Chip Conveyor

508

ID	MI7995
Make	GILDEMEISTER
Model	CTX-310
YOM	2007
Condition	Good Condition
Photo	See Photo
Chuck size :- 250 MM between center :- 700 MM

509

ID	MA35384
Make	Boehringer,Germany
Model	DUS560ti
YOM
Condition	Good Condition
Photo	See Photo
Turning diameter- 570mm Turning length - 1000 mm

510

ID	MA35355
Make	VDF,Wohlenberg
Model	U1270S CNC
YOM
Condition	Good Condition
Photo	See Photo
FEATURES: ALLEN BRADLEY 7360 CNC CONTROL SLIDING GAP CREATED BY POWER MOVEMENT OF THE HEADSTOCK 2540 MM SWING X 1016 MM LONG GAP WHEN OPEN BORING BAR ATTACHMENT 8-POSITION POWER TURRET CAPACITY: MAXIMUM SWING OVER BED 1270 MM MAXIMUM SWING OVER GAP 2540 MM MAXIMUM SWING OVER SADDLE 1000 MM DISTANCE BETWEEN CENTERS, GAP OPEN 7163 MM DISTANCE BETWEEN CENTERS, GAP CLOSED 6147 MM LENGTH OF GAP 1016 MM MAIN SPINDLE BORE 104 MM WORK PIECE WEIGHT IN CHUCK 4800 LBS WORK PIECE WEIGHT BETWEEN CTRS 12,000 LBS WORK PIECE WEIGHT (1) STEADY REST 14,112 LBS WORK PIECE WEIGHT (2) STEADY RESTS 27,500 LBS WIDTH OF BED 710 MM LENGTH OF CARRIAGE SADDLE 1000 MM SPINDLE SPEEDS 2.24 TO 450 RPM TORQUE 10 KNM TAILSTOCK QUILL DIAMETER 160 MM TAILSTOCK QUILL TRAVEL 250 MM EQUIPPED WITH: ALLEN BRADLEY 7360 CNC CONTROL 8-POSITION POWER TURRET 1000 MM T-SLOTTED FACE PLATE CHUCK BORING BAR ATTACHMENT (NO BORING BARS) ROLLER TYPE STEADY REST, 51 MM TO 508 MM CAPACITY PRECISION RACKS FOR CARRIAGE LONGITUDINAL TRAVEL POWER TAILSTOCK OPERATORS & MAINTENANCE MANUALS 53.6 HP MOTOR 480 VOLT

511

ID	MA35327
Make	PBR,Italy
Model	T450SNC
YOM	1995
Condition	Good Condition
Photo	See Photo
Control:HEIDENGAIN turning length : 5000 mm 4-jaw chuck : 800 mm spindle bore : 130 mm spindle speed : 8-1500rpm max. turning diameter above the bench : 920 mm

512

ID	MA35321
Make	Okuma,Japan
Model	LU45
YOM	2008
Condition	Good Condition
Photo	See Photo
swing 33.07" swing over cross slide 22.5 " Turning diameter 25.59" spindle bore 4.33" x-axis travel 17.32"/12.01" z-axis travel 82.28"/79.72" Rapid traverse (x/z) 787 IPM/591 IPM spindle speed 2,800 RPM main motor 60 horsepower Turret capacity 12+10 machine weight (approx.) 46,000 Lbs Equipped with: OSP-p200L CNC Control Two turrets V12. V10 15"3-JAW power chuck programable tailstock coolant system Chip conveyor Hi-G control Turret position comp Tool wear comp NC torque Limit Cycle time CAL Tool life managment auto door LAP4, Nc work counter, nose R-2B, Exp auto champfer, user task 2,NC work monitor, cycle time check, load monitor, MAC man, 3D animation, custom apl,

513

ID	MA35320
Make	Okuma,Japan
Model	LH55-N
YOM	2002
Condition	Good Condition
Photo	See Photo
TURRET TYPE: Two Turret (V8 back, H6 front) SPINDLE MOTOR: 50 hp MAX SPINDLE SPEED: 1,000 rpm SPINDLE RANGES: 4 total TURRET POSITION: 14 Total CUTTING FEEDRATE: 9.37 ipm (Z) RAPID FEEDRATE Z: 394 ipm RAPID FEEDRATE X : 197 ipm DISTANCE BETWEEN CENTERS: 120" SWING OVER SADDLE: 26.97" SWING OVER BED: 43.31" SPINDLE BORE: 12.99" SPINDLE NOSE: A2-15" Z-AXIS TRAVEL: 119.29" X-AXIS TRAVEL: 26.57" CHUCK SIZE: 30" TAILSTOCK TAPER : MT #6 CUTTING FEEDRATE:0.001 ipm (X) OPTIONS / EQUIPPED WITH OSP E100L CNC CONTROL 5980 CUTTING HOURS CHIP CONVEYOR TAILSTOCK WITH PROGRAMMABLE QUILL TWO TURRET (V8 BACK H6 FRONT) A2-15 SPINDLE NOSE 12.99" THROUGH STEADY REST 30" 4-JAW CHUCK

514

ID	MI7985
Make	BFW,India
Model	BTC Oribitur
YOM	2019
Condition	Good Condition
Photo	See Photo
CHUCK DIA 200 WITH TAIL STOCK WITH OUT STABILIZER FANUC CONTROL

515

ID	MI7984
Make	Ace jobber
Model	J300LM
YOM	2017
Condition	Good Condition
Photo	See Photo \| See Video
CHUCK DIA 165 WITH TAIL STOCK WITH STABILIZER FANUC CONTROL

516

ID	MI7983
Make	LMW
Model
YOM	2011
Condition	Good Condition
Photo	See Photo
CHUCK DIA 165 WITH TAIL STOCK WITH STABILIZER FANUC CONTROL

517

ID	MI7969
Make	LMW
Model	LL20TL5
YOM	2014
Condition	Good Condition
Photo	See Photo
200 chuck 500 Length

518

ID	MI7965
Make	Mori Seiki
Model	SK35
YOM
Condition	Good Condition
Photo	See Photo \| See Video
90 through Bore Photos not available

519

ID	MA35284
Make	Hardinge
Model	Conquest CS-GT
YOM	1993
Condition	Good Condition
Photo	See Photo
Control: Fanuc 0-T CNC control with RS232, Spindle capacity (5C collet chuck): 1-27 mm diameter, X-Axis travel: 303 mm, Z-Axis travel: 281 mm, Maximum spindle speed: 6000 rpm, Spindle motor: 3.7 kW, Machine Dimensions (LxDxH approx.): 1800 x 1500 x 1650 mm, Machine + Ancillary Overall Length (approx.): 8600 mm, Weight (approx.): 3000 kg, Turbo Chip Conveyor, Parts Chute, Various tool holders, FMB Mini Turbo S 3000 magazine bar loader,

520

ID	MA35280
Make	MAZAK
Model	Integrex E650
YOM	2003
Condition	Good Condition
Photo	See Photo
FEATURES: MAZATROL FUSION 640 M-PRO CNC CONTROL B-AXIS MILLING SPINDLE MAIN SPINDLE & TAILSTOCK 800 RPM MAIN SPINDLE 10,000 RPM MILLING SPINDLE 610 MM 4-JAW CHUCK 483 MM 3-JAW CHUCK 305 MM 3-JAW CHUCK WITH LIVE CENTER FOR TAILSTOCK MOUNTING 120-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT: 1,000 PSI AUTOBLOK PROGRAMMABLE STEADY REST: 51 MM -318 MM DIAMETER CHIP CONVEYOR SPECIFICATIONS: SWING 919 MM TURNING DIAMETER 919 MM CENTER DISTANCE 2032 MM X-AXIS TRAVEL 1025 MM Z-AXIS TRAVEL 2106 MM Y-AXIS TRAVEL 650 MM B-AXIS HEAD TILT -30/+210 DEGREES C-AXIS INDEX 0.001 DEGREES TAILSTOCK TAPER #6 MT MAIN SPINDLE: MAIN SPINDLE SPEED 800 RPM MAIN MOTOR 60 HP BAR CAPACITY 160 MM SPINDLE NOSE JIS A2-11 B-AXIS MILLING SPINDLE: HEAD TILT -30/+210 DEGREES SPINDLE TAPER CAT 50 LIVE TOOL SPEED 10,000 RPM SPINDLE MOTOR 50 HP TOOL STORAGE FOR MILLING SPINDLE 120 ATC EQUIPPED WITH: MAZATROL FUSION 640 M-PRO CNC CONTROL B-AXIS MILLING SPINDLE MAIN SPINDLE & TAILSTOCK 610 MM 4-JAW CHUCK 483 MM 3-JAW CHUCK 305 MM 3-JAW CHUCK WITH LIVE CENTER FOR TAILSTOCK MOUNTING 800 RPM MAIN SPINDLE 10,000 RPM MILLING SPINDLE 120-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT: 1,000 PSI AUTOBLOK PROGRAMMABLE STEADY REST: 51 MM -318 MM DIAMETER CHIP CONVEYOR

521

ID	MI7962
Make	Ace jobber
Model	Jobber XL
YOM	2008
Condition	Good Condition
Photo	See Photo
200 chuck 350 Length With TaillStock

522

ID	MI7955
Make
Model	OMC2000
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Fanuc Control 1000 x 500 x 500 mm

523

ID	MA35264
Make	Mazak,Japan
Model	Integrex40-ATC
YOM	1990
Condition	Good Condition
Photo	See Photo
MAXIMUM SWING OVER BED: 22.04" MAXIMUM TURNING DIAMETER (CHUCKING / SHAFT): 22.04" / 15.75" DISTANCE BETWEEN CENTERS: 81.1" SPINDLE SPEEDS: 5 - 3000 RPM SPINDLE MOTOR: 40 / 30 HP AC SPINDLE BORE: 4.09" SPINDLE NOSE: A2-11 SPINDLE TORQUE: 1080 FT. LBS. TOOLS: 120 ROTARY TOOL MOTOR: 15 / 9 HP AC ROTARY TOOL SPEEDS: 18 - 3000 RPM RAPID TRAVERSE RATES (X / Z): 472 / 590 IPM TOOL CHANGE TIME (T - T): 2.9 SECONDS X-AXIS TRAVEL: 24.2" Z-AXIS TRAVEL: 83.54" C-AXIS INDEX: 0.001 DEGREES Y-AXIS TRAVEL: 7.87" MAXIMUM TOOL DIAMETER: 3.54" / 4.72" MAXIMUM TOOL LENGTH: 11.8" MAXIMUM TOOL WEIGHT: 22 LBS. TAILSTOCK TAPER: MT #5 MACHINE DIMENSIONS (L X W X H): 240.7" X 139.7" X 87.2" MACHINE WEIGHT: 22,700 LBS. FEATURES: MAZATROL T 32-3 CNC CONTROL 14" COLOR CRT CONVERSATIONAL PROGRAMMING EIA / ISO INPUT FUNCTION GRAPHIC DISPLAY

524

ID	MA35263
Make	Mazak,Japan
Model	Integrex60X3000U
YOM
Condition	Good Condition
Photo	See Photo
SWING OVER BED: 36" DISTANCE BETWEEN CENTERS: 120" SWING OVER CARRIAGE: 26" MAXIMUM TURNING DIAMETER BETWEEN CENTERS: 24" C AXIS SPINDLE INDEXING: 0.001 DEGREE Y AXIS TRAVEL: +/- 7.87" ROTARY TOOL SHANK: CAT 50 ROTARY TOOL SPEEDS: 12 - 2000 RPM TOOL CHANGER CAPACITY: 30 MACHINE WEIGHT: 42,000 LBS. EQUIPPED WITH: MAZATROL T32-3 CNC CONTROL 21" HYDRAULIC CHUCK PROGRAMMABLE HYDRAULIC TAILSTOCK MISC. TOOLING

525

ID	MA35252
Make	Doosan
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Control: Doosan FANUC i Series, Kitagawa 3 jaw chuck, Live tooling, Iemca magazine bar laoder,

526

ID	MA35247
Make	Mori Seiki
Model	ZT1500Y
YOM	2003
Condition	Good Condition
Photo	See Photo
Control CNC: MSG-501 Axis X-axis upper turret travel mm: 140 X-axis lower turret travel mm: 140 Y-axis upper turret travel mm: � 50 Z-axis upper turret travel mm: 700 Z-axis lower turret travel mm: 690 Turning diameter max. mm: 190 Turning length max. mm: 510 Rapid traverse X, Z mm / min: X1, X2, 18,000 / Z1, Z2, 24,000 / Y, 6,000 / B, 24,000 Main spindle Speed rpm: 5.300 Passage mm: �52 Sub spindle Speed rpm: 5.300 Passage mm: �52 Upper turret Number of tool slots pcs.: 16 Tool system: VDI30 Driven tool places pcs.: 16 Lower turret Number of tool places pcs.: 16 Tool system: VDI30 Driven tool places pcs.: 16 Equipment Tool measurement in the working area for upper and lower turrets Chip conveyor Signal light Machine running times Processing time main spindle hrs.: 14.150 Processing time sub spindle hrs.: 17.735 Basic machine dimensions/weight Length mm: 2,870 Width mm: 2,380 Height mm: 2,100 Weight kg: 6,100

527

ID	MI7937
Make	Spinner
Model	TC52-MC
YOM
Condition	Good Condition
Photo	See Photo
Swing Diameter :- 400 MM max. turning diameter:- 280 MM Center Distance :- ~550MM Stroke of X-Axis :- 200 MM Stroke of Z- Axis :- 570 MM max.speed X/Y :- 15/24 M/Min Turning Spindle spindle nose :- A6 internal diam. of spindle bearing :- 90 MM Max. spindle speed RPM:- 5000 bar capacity ( collects ) :- 52 MM Power chuck :- 210 MM Passage of chuck :- 66 MM torque fanuc ( 30 Min ):- 70 Nm torque Siemens ( 40% ) :- 82 Nm Clamping system :- SMW Feed Axes Force of Feed X axis :- ~7542 N Force of Feed Y axis :- ~ 3771 N Tailstock :- A-P Diam. of tailstock Sleeve :- 60 mm/MK4 Stroke of sleeve :- 125 MM stroke of tailstock :- 500 MM Anpresskraft Bei 30 bar :- 400 daN Turret number of station :- 12 tool holder DIN69880 :- 30 outer cross section of tool:- 20 x 20 cross- section of tool/boring bar :- ~Rd 32 live tools :- AC number of driven tools:- 12 speed of rotating tools :- 6000 torque ( 30min) fanuc:- 23.5 Nm torque ( 40%) siemens :- 14.75 Nm profile of coupling :- TOEM 160 / VDI30 Others Coolant Tank :- ~85 I Pressure:- ~8 BAR/40/MIN( 10 BAR) Weigth :- 2500 kG Dimentions ( LxWxH) :- 2,1M x 1,35M x 1,8M Electrical Data power consumption Main spindle motor ( fanuc -30 min ) kW 11( TC42/52) Main spindle motor ( Siemens - 40 %) kW 12( TC42/52) live tools ( fanuc - 30min ) kW:- 3.7 live tools ( Siemens - 40 %) kW :- 6 cooling system of electric cabinet :- kW 0,5 Control system Siemens :- typ 810D Fanuc :- typ 21iTB Electrical Euuipments Operation Voltage 400V Frequency 50/60 Hz Control Voltage V 24 DC operation current LB A 34 Nominal current of the saftey device LN A 35 connection NETZ TN/TT/IT Pneumatic system supply values Max. operation pressure :- 10 bar nominal operation pressure :- 6 bar min. operation :- 3 bar control of valves V:- 24 DC Quality :- 2 according to PNEUROP 6611 HOSE size N8x1DIN73378 Hydraulic system max. operation pressure :- 40 bar min. operation pressure :- 5 bar capacity of hydraulic tank:- I ~60

528

ID	MA35231
Make	DAENWOO
Model	Puma105
YOM	1990
Condition	Good Condition
Photo	See Photo
CNC: Fanuc OT Stroke: X-Y 200 - 800 mm rpm: 20- 2500 Diameter max work: mm 580

529

ID	MA35229
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Rif. Lotto 265 Fresatrice vertical brand MAHO Type: MH 800C CNC:Philips 432 Table dimension: mm 900 x 600 Stroke: mm 800x 500 Z: 600 N� of tools: n� 30 Years manufacture: 1990 horizontal CNC lathe brand ERNAULT -TOYODA Type: ET 220 length work: mm 480 Diameter work: mm 350 n� of tools: n� 12 Stroke: X\Z 180 x 510 cnc: NUM 1060 years manufacture:1998 horizontal CNC lathe brand ERNAULT -TOYODA Type: ET 220 Years manufacture:1999 technical detail whit up cnc: NUM 1060

530

ID	MA35228
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Rif. Lotto 266 horizontal CNC lathe Brand HARDINGE Type:SB4- GN cnc: Fanuc GN8 n� of tools:n� 2 x 8 pieces pag. 1-2 Years manufacture: 1990 Horrizontal CNC lathe Brand MAZAK Type: QT 20 cnc: Mazatrol CAM T2 n� of tools :n� 8 Years manufacture:1990

531

ID	MA35227
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MONFORT Type:KN 5 CNC:Siemens 840D Lenght work:mm 1000 diametr chuk:mm 250 Hight center: mm 350 power alimentation:380V- 50 Hz Tool turret:n� Rapid change VDI 30 Years manifacture:2000 rpm:rpm 3'000 Hole head:mm 70 Power motor. Kw. 11 Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MAZAK Type:QT 15 N CNC:Mazak fusion T2 Stroke: work: mm : x 180- y 510 diametr work:mm 254 Power motor:kw 15 power alimentation:380V- 50 Hz ciuk:diam. 210 Years manifacture:1988 n� of tools:n� 8 Hole head:mm 62 Rif. Lotto 257 F.IN Horrizontal lathe brand CAZNEUVE Type:HBX 360 Lenght Work: mm 800 Hight center: mm 190 Diameter work:mm 360 Rpm:50 to 3000 Hole head:mm 60 Power motor:kw 5, 2 Wheight:Kg. 1.400

532

ID	MA35223
Make	Mori Seiki
Model	NLX2500MC/1250
YOM	2013-07
Condition	Good Condition
Photo	See Photo
Control: Mitsubishi M730BM with Mapps IV, X-Axis travel: 260 mm, Z-Axis travel: 1345 mm, C-Axis: 0.001 degrees, Maximum bar diameter, Maximum cutting diameter: 356 mm, Maximum turning length: 1255 mm, Spindle speed: 4000 rpm, 12 station turret, Tool drive power: yes, Speed driven tools: 10000 rpm, High pressure coolant system: 10 bar Total power requirement: 41 kVA, 3 live tools, Weight: 6900 kg, Overall dimensions: 5.05 x 2.2 x 2.27 m,

533

ID	MA35204
Make	Miyano
Model	BNE64SY2
YOM	New 2005
Condition	Good Condition
Photo	See Photo
DESCRIPTION: Miyano BNE-64SY2 CNC Multi-axis Turning Center 2-Turrets Y-Axis * Sub-Spindle * New 2005 EQUIPPED WITH: Fanuc 18iTB Control 2004 LNS Quick Load Servo S2 Barfeed s/n 302471 Spindle liners Hainbuch Top 65G Quick Change Collet System, Approx 10 collets Live Holders, Approx 20 OD & ID Holders, approx 20 Chip Conveyor Cooljet High Pressure Coolant System SPECIFICATIONS: Click the link below to view a video demonstration of this machine https://youtu.be/Eg7Ensnw0lc To the best of our knowledge all details listed below are deemed correct.) It is the buyers responsibility to confirm ALL details prior to purchase. Control Fanuc 18i-TB Number of Axes 8 Swing 12.8" Turning Diameter 6.5" Bar Capacity 2.57" Center Distance 41.8" Travel (X) 8.07" Travel (Z) 38.9" Travel (Y) 1.57" Travel (B) 23" Travel (X) Lower Turret 8.07 Travel (Z) Lower Turret 38.9 Tool Capacity 12 / 12 C Axis Index 0.001 Degree Travel (B) 41.77" Chuck Size Dual 8" Spindle Speed 4,000 RPM Spindle Motor Cont. 30 HP Sub Spindle Motor 30 HP Sub Spindle Speed 4,000 RPM Turret Stations 2x12 Live Milling Yes Live Milling HP 8 HP Live Tooling Speed 4,000 RPM Machine w/chip conveyor: 193" x 94" x 89" 30,000 lbs Cooljet HPC: 57" x 24" x 60" 1,350 lbs LNS Barfeed: 81" x 72" x 66" 1,500 lbs Pallet w/tooling: 35" x 35" x 21" 460 lbs

534

ID	MA35203
Make	Nakamura
Model	WTS150
YOM	2003
Condition	Good Condition
Photo	See Photo
MAX. TURNING DIAMETER .. 12.20" MAX. TURNING LENGTH .. 10.03" BAR CAPACITY L/R SPINDLES . 1.65"/1.25" CHUCK SIZE .. 6" SPINDLE SPEED, LEFT SPINDLE . 6000 RPM SPINDLE SPEED, RIGHT SPINDLE . 8000 RPM LEFT SPINDLE MOTOR .. 15/11kW RIGHT SPINDLE MOTOR .. 15/11kW NUMBER OF TURRETS, UPPER . 2 DRIVEN MOTOR POWER .. 3.7/2.2kW DRIVEN TOOL SPEED .. 6000 RPM NUMBER OF TURRETS, LOWER . 1 DRIVEN MOTOR POWER .. 3.7/2.2kW DRIVEN TOOL SPEED .. 6000 RPM UPPER AXES TRAVEL, X/Z/B2 . 8.16"/11.81"/34.4" UPPER Y-AXIS TRAVEL .. 60mm (+/-30) X 2 LOWER AXES TRAVEL, X/Z . 8.16"/31.49" APPROX. WEIGHT .. 22,000 LBS EQUIPPED WITH: - FANUC 16iTB CNC CONTROL - COLLET CHUCK ON LEFT SPINDLE - 6" 3-JAW HYD. CHUCK ON RIGHT SPINDLE - (2)12 POSITION UPPER TURRETS W/ Y-AXIS (ALL STATIONS LIVE) - (1) 12 POSITION LOWER TURRET W/ LIVE MILLING (ALL STATIONS LIVE) - CHIP CONVEYOR - IEMCA BOSS 545/21 - HIGH PRESSURE COOLANT - STATIC AND LIVE TOOL HOLDERS - ALL AVAILABLE MANUALS

535

ID	MA35159
Make	Mazak Integrex
Model	E1060
YOM	2007
Condition	Good Condition
Photo	See Photo
FEATURES: MAZATROL 640M PRO CNC CONTROLLER 5-AXIS MACHINING CAPABILITY 120-STATION AUTOMATIC TOOL CHANGER (2) 1003 MM DIAMETER PALLETS THROUGH SPINDLE COOLANT (1000 PSI) RENISHAW PROBING, PROBE NOT INCLUDED CHIP CONVEYOR CAPACITY: X-AXIS, TABLE FORWARD/BACKWARD 1875 MM Y-AXIS, SPINDLE HEAD, LEFT/RIGHT 1060 MM Z-AXIS, SPINDLE HEAD UP/DOWN 1345 MM B-AXIS, SPINDLE HEAD TILT -30/+120 (150 DEG.) C-AXIS, TABLE ROTATION .001 MAXIMUM MACHINING DIAMETER 1250 MM MAXIMUM WORKPIECE 1250 MM X 1250 MM PALLET LOAD 5,952 LBS. PALLET SIZE 1003 MM DIA. NUMBER OF PALLETS 2 TOOL CHANGER 120 STATIONS MILLING SPINDLE SPEED RANGE 35-10,000 RPM TURNING SPEED RANGE 1-500 RPM SPINDLE TAPER CAT 50 TABLE MOTOR 50 HP / 30 KW FLOOR SPACE 7925 MM X 5486 MM MACHINE HEIGHT 4572 MM MACHINE WEIGHT 90,000 LBS EQUIPPED WITH: MAZATROL 640M PRO CNC CONTROLLER 5-AXIS MACHINING CAPABILITY 120-STATION AUTOMATIC TOOL CHANGER (2) 1003 MM DIAMETER PALLETS THROUGH SPINDLE COOLANT (1000 PSI) RENISHAW PROBING, PROBE NOT INCLUDED CHIP CONVEYOR

536

ID	MA35157
Make	Mori Seiki
Model	SL45
YOM	1996
Condition	Good Condition
Photo	See Photo
Chuck size 300.Distance between center 1100 m. Turret :12 Station Max turning dia: 600mm. Spinle hole : 90 mm,Fanuc 18T

537

ID	MA35156
Make
Model	DS300NC
YOM	1989
Condition	Good Condition
Photo	See Photo
Max diam external gear: 300 mm, Max diam internal gear : 300 mm, Max module; 6.5, Max band width 50 mm, Max band width 100 mm, Max helical angle with knife diam 5� - 45 deg. Max diam external part catcher 485 mm Weights; net weigth machine + motors 5500 kg, machine with simple packaging 5950 kg, machine with export packaging 6400 kg

538

ID	MA35155
Make	Daewoo Puma
Model	Puma12L-C
YOM	1995
Condition	Good Condition
Photo	See Photo
Fanuc 16-T cnc control Chuck:15" Bar Cap 4.5� Bore 5.1� Spindle Nose A2-11 Motor 35 Hp DC Spindle Speeds 20-2000 Rpm Turning Dia 19� Swing Over Bed 22.4� Swing Over Carriage 13.8� Max Saft Length 41.3� X Axis Travel 10.2� Y Axis Travel 41.3� Rapid Traverse 480/630ipm Turret 10 Tailstock Dia/Taper 4.3�/MT #5 Tailstock Quill Stroke 4.0� Approx Dia 125�x82�x79� Approx Weight 16.350 lbs Wood crate with Chuck and manuals

539

ID	MA35154
Make	Daewoo Puma
Model	400B
YOM	2006
Condition	Good Condition
Photo	See Photo
Chuck Size: 15" capacity (workholding currently mouted in machine is not included)� � � � � � � � �� 15" kitagawa hyd. chuck Included with machine Max Diameter Bar Capacity: 4.63" Max Swing Over Bed / Carriage: 27.56" / 18.9" Spindle Motor: 50 / 37 HP Spindle Speed: 20 - 2000 RPM Spindle Nose: A2-11 Spindle Bore: 5.2" Tools: 10 Rapid Traverse Rates (X / Z): 630 / 790 IPM X-Axis Travel: 14.3" Z-Axis Travel: 43.5" Turret Index (Single Step): 0.25 Seconds Machine Dimensions (L x W x H): 153" x 85" x 90" Machine Weight: 19,000 lbs. Distance Between Centers: 44.1" Max Turning Diameter (Max / Std): 21.65" / 14.96" Max Turning Length: 41.34" Spindle Torque: 1836 ft. lbs. Tailstock Taper: MT#6 Product Features FANUC 21iTB CNC control PC/MCIA Interface 15" Hydraulic Chuck Programmable Tool Presetter Programmable Tailstock Quill Chip Conveyor�

540

ID	MA35153
Make	Daewoo Puma
Model	400B
YOM	2001
Condition	Good Condition
Photo	See Photo
Chuck Size: 15" Max Diameter Bar Capacity: 4.63" Max Swing Over Bed / Carriage: 27.56" / 18.9" Spindle Motor: 50 / 37 HP Spindle Speed: 20 - 2000 RPM Spindle Nose: A2-11 Spindle Bore: 5.2" Tools: 10 Rapid Traverse Rates (X / Z): 630 / 790 IPM X-Axis Travel: 14.3" Z-Axis Travel: 43.5" Turret Index (Single Step): 0.25 Seconds Machine Dimensions (L x W x H): 153" x 85" x 90" Machine Weight: 19,000 lbs. Distance Between Centers: 44.1" Max Turning Diameter (Max / Std): 21.65" / 14.96" Max Turning Length: 41.34" Spindle Torque: 1836 ft. lbs. Tailstock Taper: MT#6 Product Features FANUC 18iTB CNC control PC/MCIA Interface 15" Hydraulic Chuck Programmable Tool Presetter Programmable Tailstock Quill Chip Conveyor�

541

ID	MI7908
Make	Dewoo Puma
Model	12L
YOM
Condition	Good Condition
Photo	See Photo
Between center: 1000 mm

542

ID	MA35070
Make	Mazak,Japan
Model	NEXUS5000II
YOM	2011
Condition	Good Condition
Photo	See Photo
CNC control: MAZATROL Matrix NEXUS Axes X mm: 730 Y mm: 730 Z mm: 740 B axis degree: 1 Feeding speed max. mm / min: 0 � 50,000 Rapid travel speed max. m / min: 50 Pallet Number of pallets: 2 Dimensions mm: 500 x 500 Workpiece weight max. kg: 500 Maximum turning diameter of the workpiece mm: 800 Max workpiece height mm: 1,000 Spindle Spindle speed rpm: 12,000 Spindle drive power kW: 26 Tool system Tool type: ISO 40 Charger type: RANDOM Number of tools: 40 Maximum tool weight. kg: 12 Equipment Chip conveyor Internal cooling 10 Bar Manuals Basic machine dimensions / weight Length mm: 4.943 Width mm: 2.444 Height mm: 2.850 Weight kg: 11.000

543

ID	MA35062
Make	DMG Mori Seiki
Model	NZX-2500/600L
YOM	2015
Condition	Good Condition
Photo	See Photo
SWING:30.7" MACHINING LENGTH:23.6" # AXIS 4 CHUCK SIZE:10" BAR CAPACITY:2.9" POWER:30 hp MAX RPM:4,000 RPM TURNING DIA:14.5" TAILSTOCK:Yes LIVE TOOLING:No SUB SPINDLE No EQUIPPED WITH: M730UM - Celos Ergoline Touch Tailstock spindle built in center MT4 Chip conveyor right discharge EtherNetI/P I/F 5 external M-Codes Auto Door

544

ID	MI7890
Make	HMT,India
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
Feed range: 1-5000 mm/min, Rapid traverse rate: 20 m/min Longitudinal Continuous duty cycle: 5000 N Force: 7500 15 min duty cycle Ball screw diameter/pitch: 32/10 mm, Cross feed drive: Feed range: 1-5000 mm/min Rapid traverse rate: 15 m/min Longitudinal continuous duty cycle: 3250 Force 15 min duty cycle: 4850 N Ball screw diameter /pitch: 25/6 mm, Turret No. of tools (External/Internal): Std 8 wedge lock : Opt: 8 VDI 3425/dia 40 Turning tool shank size: 25 x 25 mm, Max. dia boring tool shank: 40 mm, Capacity (1 n solid steel of 600 N/mm2 tensila strongth): 16 mm, Turret actuation: hydraulic

545

ID	MI7889
Make	Daewoo Puma
Model	12L
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Dia- 400 MM ABC LENGTH- 1000 MM Working -780 MM Fanuc 15 T Control Swing- Maximum turning 520 OD

546

ID	MA35042
Make	Daewoo
Model	PUMA10S
YOM	1989
Condition	Good Condition
Photo	See Photo
Control:FANUC O-T XZ travel:200x800mm Max. cutting length:770mm Spindle speed:20-2500rpm Swing over bed:580mm

547

ID	MA35036
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MONFORT Type:KN 5 CNC:Siemens 840D Lenght work: mm 1000 diametr chuk:mm 250 Hight center: mm 350 power alimentation:380V- 50 Hz Tool turret:n� Rapid change VDI 30 Years manifacture:2000 rpm:rpm 3'000 Hole head:mm 70 Power motor. Kw. 11 Rif. Lotto 257 F.IN. Horrizontal lathe CNC brand MAZAK Type:QT 15 N CNC:Mazak fusion T2 Stroke: work: mm : x 180- y 510 diametr work:mm 254 Power motor:kw 15 power alimentation:380V- 50 Hz ciuk:diam. 210 Years manifacture:1988 n� of tools:n� 8 Hole head:mm 62 Rif. Lotto 257 F.IN Horrizontal lathe brand CAZNEUVE Type:HBX 360 Lenght Work: mm 800 Hight center:mm 190 Diameter work:mm 360 Rpm:50 to 3000 Hole head:mm 60 Power motor:kw 5, 2 Wheight:Kg. 1.400

548

ID	MA35014
Make	Daewoo
Model	Puma700M
YOM	2002
Condition	Good Condition
Photo	See Photo
Control :- Fanuc series 18i-T XZ travel : 470 x 1600 MM Max. turning diameter:- 900 MM Max. turning length :- 2000 MM Spindle speed :- 1500 RPM Chuck size :- 800 MM Toolchanger :- 12 ATC

549

ID	MA35005
Make	Mazak,Japan
Model	Nexus550
YOM	2012
Condition	Good Condition
Photo	See Photo
Max. Swing Over Bed: 1038.86mm Max. Machining Diameter: 909.32mm Max. Machining Length: 2009.14mm Bar Capacity: 273.30mm Spindle Bore: 274.32mm Max. Spindle Speed: 1,000 RPM Spindle Motor: 44.74 kw X-Axis Travel: 463.55mm Z-Axis Travel: 2165.35mm Approximate Weight: 17233 Kg EQUIPPED WITH: Mazak Mazatrol Matrix Nexus CNC Control Programmable Tailstock Tool Eye 609.60mm 4-Jaw Chuck 12-Position Turret Chip Conveyor Coolant System

550

ID	MA35002
Make	GILDEMEISTER
Model	CTX-310
YOM	2007
Condition	Good Condition
Photo	See Photo
250 Chuck Size Between Center 700

551

ID	MA34916
Make	Boehringer,Germany
Model	VDF32M
YOM	1991
Condition	Good working condition
Photo	See Photo
Control: Siemens Sinumerik 880 Colour-graphic with 12" screen Memory expansion to 128 KB 3-D-Interpolation Turning length 1150 mm Swing over bed 700 mm Turning diameter 440 mm Bed slide path chuck (on top/down) 650/880mm Cross slide path X-axis (on top/down) 340/340mm Clamping chuck-� 315/400mm Spindle � in front bearing 150mm 2 x 2 controlled axes Revolution area 25-4000 min-1 Max. torque 1900Nm Main cutting force 10kN 2-step AC-main drive, 63 kW Main spindle head size 11 Tailstock NC-controlled Self-propelling via ball screw, Rapid movement 10 m/min, Clamping force adjustable by hand Steep taper No. 40 Spindle sleeve axial force, adjustable, max. 15.5 kN Upper turret for driven tools Revolver with directional logic 12 straight shank receptacle DIN 69880-50 x 78, thereof 6 positions loadable with driven tools. Lower turret With 12 straight shank receptacle DIN 69880-50x78 C-axis NC-controlled drive of main spindle for boring and milling in connection with driven tools Steady-rest bottom part, NC-controlled Own drive by fix ball screw, Rapid movement 10 m/min, Ordering steady-rests left and right side possible Parking position under the spindle head Enforced coolant pump 80 l/min at 1 bar Power-operated chip protection door with security bar Activation by pushbutton or by program with M 58 respectively M 59 Operating hours counter dependant from spindle run (in control cabinet) Preparation for time recorder connection (Kienzle) Feed speed up to 15000 mm/min Rapid movement 15000 mm/min Boring force 14kN Machine weight 18000 Kg

552

ID	MA34908
Make	Okuma,Japan
Model	LU45
YOM
Condition	Good Condition
Photo	See Photo
Swing 33.07" Turning Diameter 25.59" Spindle Bore 4.33" X-Axis Travel 17.32"/12.01" Z-Axis Travel 82.28"/79.72" Spindle Speed 2,800 RPM Turret Capacity 12+10 15" 3-Jaw Chuck Quantity: 2 nos

553

ID	MA34876
Make	Traub
Model	TNX 65/42
YOM	2009
Condition	Good Condition
Photo	See Photo
turning diameter 65 mm turning length 650 mm control Traub TX 8i -s bar material dia. 65/42 mm Spindle 1 RPM 5000 1/min Spindle 1 Power 24 kW Spindle 1 Torque 192 Nm Spindle 2 RPM 5000 1/min Spindle 2 power 24 kW Spindle 2 torque 192 Nm milling spindle drive 5,5 kW Milling spindle RPM 12000 1/min Milling Spindle torque 35,4 Nm Travel x / y / z milling spindle 340 / �40 / 650 mm B-axis swivel angle � 95 index � / deg rapid travel range x / y / z 30 / 15 / 60 m/min Spindle taper tool spindle HSK-A 40 numbers of tools in magazin 80 HSK-A 40 Travel x / y / z turret 2 175 / �40 / 650 mm rapid travel range X2, Y2, Z2: 20/20/40 m/min Travel x/y / z turret 4 175 / �40 / 650 mm rapid travel range X4, Y4, Z4: 20/20/40 m/min total power requirement 85 kVA weight of the machine ca. 10 t dimensions of the machine ca. 4,6x2,5x2,6 m power chuck Rota NCD 165-46 Optical tool measuring TRAUB ATC TRAUB WinFlexIPS Software option TRAUB Polyform Software option 3D Helicalinterpolation for y-axis Power failure protection Parts gripper with conveyor belt and parts/rest piece sorting system High pressure coolant system 80 bar Coolant cooling system Chip conveyor Collet chuck main spindle Hainbuch Axfix SK 65 BZI Collet chuck subspindle Hainbuch Axfix SK 65 BZI Warm up cycle Direct threading Barfeeder Interface Preparation for deep hole drilling Revolver 2&4 / Turret 2 and 4

554

ID	MA34860
Make	Haas
Model	TL2
YOM	2006
Condition	Good Condition
Photo	See Photo
Turning length 1219 MM max. Turning Diameter 406 MM max. Swing 483 MM Swing over Cross Slide 282 MM Spindle speeds 2000 rpm motor power 8,9 KW Equipped with : 5 toolholder

555

ID	MI7798
Make	Exel
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck size 250mm Swing 900 Length 500mm new Control Siemens 808 D control

556

ID	MI7797
Make	Okuma Howa
Model	2SP-25HG
YOM
Condition	Good Condition
Photo	See Photo
Fanuc Control

557

ID	MI7787
Make	Hass
Model	SL30
YOM	2008
Condition	Good Condition
Photo	See Photo
300 mm Chuck 450 mm turning dia 850 mm turning length Control: CNC

558

ID	MA34766
Make	Citizen
Model	M32V
YOM	2004
Condition	Good Condition
Photo	See Photo
Machining Diameter: 1.25" Machining Length - Chucking: 12.59" Backworking - Chuck Diameter: 1.25" Backworking - Work Length: 5.8" X1 Axis Travel / X2 Axis Travel: 0.75" / 0.75" Y1 Axis Travel: 1.0" Z1 Axis Travel / Z2 Axis Travel: 4.92" / 12.6" C Axis Movement C1 / C2: .001 Degree / 1 Degree Spindle Speed: 8,000 RPM Rotary Tool Spindle Speeds: 5,000 RPM Backworking-Spindle Speeds: 7,000 RPM Spindle Motor: 7.5 HP Back Spindle Motor: 3 HP Rotary Tool Motor - Turret: 2 HP Rotary Tool Motor - Gang Plate: .5 HP Backworking-Drilling/Tapping: M8 (.39") Number of Tools - Turret: 10 Tools (20 in 1/2 index) Number of Tools - Gang Style: 5 Turn / 3 Rotary Number of Tools - Back Work Toolpost: 3 + rear facing on trt. Machine Dimensions: 110" x 50" x 69" Machine Weight: 6,900 lbs. EQUIPPED WITH: Y Axis on Turret C Axis on Main Spindle (.001) Subspindle with 1 Degree Index Live Milling and Drilling Capability Iemca Mini Boss 432/37 Bfd for 12' Bar Stock Chip Blaster High Press. Coolant System w/ Pump Chip Conveyor Parts Catcher 10 Station Turret w/ 1/2 Indexing for 20 Positions Gang Slide w/ Live Tooling Positions & Y Axis Back Working Capability from Gang & Turret Spindle Synchronization RS 232 Port Interface 3.5" Floppy Disk Interface 3 Color Machine Status Condition Lights Manuals Tooling (4) OD Tools for Turret (2) ID Holders for Turret (1) Live Tool Holder for Turret

559

ID	MA34744
Make	Mori Seiki
Model	NL1500y/500
YOM	2007
Condition	Good Condition
Photo	See Photo
Swing 36.2�/919 mm Turning Diameter: 15.1�/384 mm Center Distance: 20.2�/513 mm Chuck Size: 8�/203 mm Bar Capacity: 2�/51 mm Travel (X): 10.2�/259 mm Travel (Y): 3.9�/99 mm Travel (Z): 23.2�/589 mm C Axis Index: 0.001� Rapid Traverse (Y): 394 IPM Spindle Nose: A2-5 Spindle Speed: 6,000 RPM Spindle Motor: 15 HP/11 KW Live Tooling Motor: 7.5 HP Live Tooling Speed: 6,000 RPM Turret Stations: 12 Machine Dimensions: 107" x 76" x 84"/ x 1930mm x 2134mm Machine Weight: 12,500 lbs/5,670 kg

560

ID	MA34742
Make	Gildemeister,Germany
Model	MF Twin300
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
C-axis Y-axis Control:FANUC 16-T Distance between spindles:1400mm X1Z1 travel:253x945mm X2Z2 travel:198x1080mm Y axis:�60mm Chuck:315mm Spindle speed:20-4000rpm Turning diameter:250m Toolchanger:2x12atc

561

ID	MA34730
Make	Mori Seiki
Model	SL-204SMC
YOM	2001
Condition	Good Condition
Photo	See Photo
Chuck Size: 8" & 6" Hydr. Chks. Swing Over Bed / Over Cross Slide: 26.8" / 20.09" Maximum Turning Diameter: 15.36" Maximum Turning Length: 12.7" Distance Between Centers: 29.6" Bar Capacity: 2.5" X-Axis Travel: 9.3" Z-Axis Travel: 20.5" C Axis Spindle Movement - Both Spndl: .001 Degree Spindle Nose / Spindle Bore: A2-6" / 2.9" Spindle Speeds: 45 - 4,500 RPM Spindle Motor: 15 HP Subspindle Speed / Motor: 60-6,000 RPM / 10 HP Rotary Tool Speeds / Rotary Motor: 3,000 RPM / 8 HP Turret Type: 12 Position Turret Machine Dimensions: 92"x74"x73" Machine Weight: 10,500 lbs. Equipped With: Live Milling/Drilling Capability Subspindle Full "C" Axis Spindle Rotation on Main/Subspd Parts Catcher Parts Exit Conveyor Chip Conveyor 8" & 6" Jaw Hydraulic Chucks Royal Filtermist FX300 Filter System 3 Color Machine Status Lights RS 232 Port for DNC Interface 3.5" Floppy Disk Interface Slant Bed Design Boxed Ways All Available Tooling All Available Manuals

562

ID	MA34729
Make	Mori Seiki
Model	SL-204SMC
YOM	2001
Condition	Good Condition
Photo	See Photo
Product Details: Chuck Size 8" Max Diameter Bar Capacity 2.5" Max Swing Over Bed / Carriage / Front Cover 26.8" / 20.1" / 18" Turning Diameter (Max / Std) 15.3" / 8.2" Max Machining Length 12.7" Spindle Motor 15 / 10 HP Spindle Speed 40 - 4500 RPM Spindle Nose A2-6 Spindle Bore 2.9" Tools 12 Sub Spindle Chuck Size 6" Sub Spindle Motor 10 / 7.5 HP Sub Spindle Speed 60 - 6000 RPM Rapid Traverse Rates (X / Z) 708 / 945 IPM X-Axis Travel 9.3" Z-Axis Travel 20.5" C-Axis Index (L & R) .001 Degree Turret Index (Single Step) 0.2 Seconds Machine Dimensions (L x W x H) 91.3" x 73.7" x 72.5" Machine Weight 11,000 lbs. Distance Between Centers 29.6" Features: � MORIC MSG-805 CNC Control � 10.4" Color LCD � MORI SEIKI GANTRY ROBOT GL-05 with 14 Station Work Stocker � C-Axis Milling Capability on Main & Sub Spindle � Programmable Sub Spindle � 8" SMW Autoblok Hydraulic Chuck on Main Spindle � 6" Kitagawa B206 Hydraulic Chuck on Sub Spindle � Turbo Chip Conveyor (Side Exit) � Mfg Date September 2001 � (3) OD Live Holders � (2) Face Live Holders � (3) Boring Bar Holders � (1) Double Boring Bar Holder � (2) Tandem Turning Holders � (1) Cut Off Holder � Three Color Tower Light � Slant Bed Box Way Construction

563

ID	MA34728
Make	Gildemeister,Germany
Model	MF TWIN 65
YOM	2005
Condition	Good Condition
Photo	See Photo \| See Video
Control: CNC Siemens 840D, Hainbuch main spindle chuck, Hainbuch sub spindle chuck, Parts catcher, Hours - Running: 37,559 hours, Hours - Power on: 72,157 hours, Iemca magazine bar loader. Tooling package: 2 off 1:1 driven tool er25 1 off 3:1 driven tool er16 5 off 25mm VDI 20 Axial tool holders 3 off 32mm VDI 20 Axial tool holders 4 off 16mm VDI 20 Radial SQ tool holder 1 off 16mm VDI 20 Axial SQ tool holder 1 off 26mm Part off blade holder Also 2 off bottom turret drive belts. Equipment for magazine bar loader: 68mm channel set with pusher and forenose, 48mm channel set with pusher and forenose, various bar grippers

564

ID	MA34727
Make	Mori Seiki
Model	SL-204SMC
YOM	2002
Condition	Good Condition
Photo	See Photo
Type of CNC Control MSG-805 MSG-805 # Axis 5 5 Swing 26.8 in 680.72 mm Turning Diameter 15.3 in 388.62 mm Center Distance 19.9 in 505.46 mm Chuck Size 8 in 203.20 mm Bar Capacity 2.5 in 63.50 mm X Axis Travel 9.3 in 236.22 mm Z Axis Travel 20.5 in 520.70 mm B Axis Travel (Sub Spindle) 21 in 533.40 mm C Axis Index 0.001� 0.001� Rapid Traverse (X/Z) 708/944 ipm 708/944 ipm Spindle Nose A2-6 A2-6 Spindle Speed (RPM) 4500 4500 Main Motor 15 hp 15 hp Live Tooling yes yes Live Tooling Speed 4,000 rpm 4,000 rpm Live Tooling Motor 7.5 hp 7.5 hp Sub Spindle yes yes Sub Spindle Chuck 6 in 152.40 mm Sub Spindle Speed 6,000 rpm 6,000 rpm Sub Spindle Motor (HP) 10 hp 10 hp Turret Capacity 12 12 Tailstock no no Y Axis no no Dimensions 92" x 74" x 73" 92" x 74" x 73" Weight 10000 lb 4,535.92 kg EQUIPPED WITH - MSG-805 Control - Chip Conveyor - Coolant Tank & Pump

565

ID	MA34711
Make	MAZAK
Model	SQT200MSY
YOM	2000
Condition	Good Condition
Photo	See Photo
Type: SQT 200 MSY CNC: Mazak fusion 640 T n� of axis: n� 4 Lenght work: mm 574 diametr work: mm 525 / 300 Power motor: kw 18,5 ciuk: diam. 210 rpm: rpm 5.000 n� of tools: n� 16 Hole head: mm 51 chip evacuator:-loading sistem type Samsys

566

ID	MA34710
Make	Haas
Model	SL20
YOM	2005
Condition	Good Condition
Photo	See Photo
Type: SL 20 CNC: Haas Lenght work: mm 508 diametr work: mm 262 Power motor: kw 15 ciuk: diam. 210 rpm: rpm 4.000 chip evacuator:-loading sistem

567

ID	MA34709
Make	Daewoo
Model	PUMA350A
YOM	1999
Condition	Good Condition
Photo	See Photo
Type: PUMA 350A Lenght work: mm 1150 Weight: 9000kg - Swing over bed: 700mm - Swing over carriage: 480mm - Recommended machining diameter: 310mm - Maximum turning diameter: 550mm - Distance between points: 1050mm - Bar passage: 91mm Maximum advisable weight: - With plate: 400kg'f - With bars: 1100kg'f Main motor power: 22KW - 30HP - X axis travel: 362mm - Z axis travel: 1105mmm - X travel speed: 16m / min - z travel speed: 20m / min Head: - Plate diameter: 305mm - Hole through head: 102mm - Speed range: 30-3000rpm - Nose: A2-8 Turret: - Number of tools: 12 - Indexed time: 0.25s - Tool height: 25mm Programmable tailstock Point shank diameter: 120mm Travel cane point: 120mm Point cone: MT # 6 Automatic lubrication on rod and guides. Chip collector INCLUDED: Marca META, Srl Standard accessories: - FANUC 18T-C control - Fanuc AC motor - Kitagawa 3-jaw chuck - 305mm diameter - Hydraulic bidirectional turret - Centralized lubrication - Refrigeration system - Rotating point MT # 6 - CNC graphics - Chip collection tank - Coolant tank - Plate opening and closing pedal - Point forward and reverse pedal Daewoo PUMA 350 Cnc lathe

568

ID	MA34705
Make	Daewoo
Model	PUMA12L
YOM	1992
Condition	Good Condition
Photo	See Photo
Type: PUMA 12 L CNC: FANUC Lenght work: mm 1020 Diametr work: mm 560 / 330 spindle Hole: mm 65 Power alimentation: 380V- 50 Hz RPM: rpm 4.500 Tools magazine: n� 10

569

ID	MA34695
Make	Daewoo
Model	PUMA240L
YOM	2004
Condition	Good Condition
Photo	See Photo
Type - PUMA 240L CNC- FANUC 21TB Diametr work - mm 550 / 390 spindle Hole - mm 65 Power motor - Kw. 18 Power alimentation - 380V- 50 Hz RPM - rpm 6.000 Tools magazine - n� 10

570

ID	MA34691
Make	Mazak,Japan
Model	Integrex 300-IIIS
YOM	2004
Condition	Good Condition
Photo	See Photo
Chuck Size : 10" Swing : 33.5" Turning Diameter : 30" Center Distance : 60" Bar Capacity : 3.46" X-Axis Travel : 24.8" Y Axis Travel : 9.06" Z-Axis Travel : 62.41" B Axis Head Tilt : 225� C Axis Index : 0.001� W Axis Travel : 41.34" Rapid Traverse (X/Y/Z) : 1,496/1,024/1,496 ipm Spindle Nose : A2-8 Main Motor : 30 HP Sub Spindle : yes Sub Spindle Speed : 4,000 RPM Sub Spindle Motor (HP) : 25/20 HP Live Tooling " yes Live Tooling Speed : 12,000 RPM - Milling Spindle Live Tooling Motor : 25 HP Tailstock : no Y Axis : yes ATC Capacity : 40 stations Dimensions : 202" x 93" x 110" Weight : 28,700 pounds

571

ID	MA34690
Make	Hankook
Model	Protec 7NB
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck Size : 21" Swing : 29.5" Turning Diameter : 29.5" Center Distance : 59" Bar Capacity : 6.3" X Axis Travel : 16.7" Z Axis Travel : 56.5" Rapid Traverse (X/Z) : 236 Spindle Speed (RPM) : 1,000 Main Motor : 20 HP Turret Capacity : 8 Tailstock : yes Y Axis : no Dimensions : 131" x 68" x 79" Weight : 8,650 pounds Live Tooling : no Sub Spindle : no # Axis : 2 EQUIPPED WITH: - Fanuc 21i-TB CNC Control - Chip Conveyor - Coolant Tank & Pump - 21" Samchully MH-221 Hydraulic Chuck - Tailstock - Duplomatic 8 Position Turret - Manual Guide i - Available Manuals

572

ID	MA34689
Make	Hankook
Model	Protec-9NB
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck Size : 21" Swing : 37.4" Turning Diameter : 37.4" Center Distance : 79" Bar Capacity : 6.3" X Axis Travel : 21.1" Z Axis Travel : 73" Rapid Traverse (X/Z) : 236 Spindle Speed (RPM) : 800 Main Motor : 35 HP Turret Capacity : 6 Tailstock : no Y Axis : no Dimensions : 176" x 87" x 73" Weight : 15,500 pounds Live Tooling : no Sub Spindle : no # Axis : 2 EQUIPPED WITH: - Fanuc 21i-TB Control - Chip Conveyor - Coolant Tank - 21" Samchully (MH-221) Hydraulic Chuck - (6) Position Duplomatic Turret

573

ID	MA34688
Make	Hankook
Model	Protec-9NC
YOM	2012
Condition	Good Condition
Photo	See Photo
Control Type : Fanuc 21i-TB Chuck Size : 32" Swing : 37.4" Turning Diameter : 37.4" Center Distance : 78.74" Bar Capacity : 9.05" X Axis Travel : 21.1" Z Axis Travel : 73" Rapid Traverse (X/Z) : 236 Spindle Speed (RPM) : 630 Main Motor : 30 HP Turret Capacity : 6 Tailstock : no Y Axis : no Dimensions : 176" x 87" x 73 " Weight : 15,500 pounds Live Tooling : no Sub Spindle : no # Axis : 2 EQUIPPED WITH: - Fanuc 21i-TB Control - Chip Conveyor - Coolant Tank - 32" Samchully HCH-32 Hydraulic 3-Jaw Chuck - 10" Spindle Bore - 6 Position Revolver Turret

574

ID	MI7767
Make	Emco
Model	Emcoturn425MC
YOM	2001
Condition	Good Condition
Photo	See Photo
Centre height: 190 mm, Turning length: 190 mm, Bar loader: FMB Turbo No. of turret tools: 2/24 Bar loader size/capacity: 3 m/2 mm, Power; 380 v /5.5 kw Control: Siemens sinumeric

575

ID	MI7766
Make	Macpower
Model	VX200Super
YOM	2012
Condition	Good Condition
Photo	See Photo
Controller Fanuc Diameter:200 mm Length: 500 mm Max Turning Dia: 300 mm Swing over bad: 400 mm Distance between Center: 600mm Spindle Nose: A2-6 Spindle Bore :63 Max Bar Capacity :51 Speed Range:3500 rpm

576

ID	MI7765
Make	Emco
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Centre Height: 190 mm No. Of Turret / Tools 2/24 Turning Length: 190 mm Bar Loader Size/capacity:1 m / 26 mm Control: Siemens Sinumeric Power 400 V / 24 A /9.5 kw Double Spindle & Double Sub Spindle

577

ID	MI7761
Make	Leadwell,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Max Swing: 450 mm, Swing over cross slide: 290 mm, max. turning diameter: 210 mm, max. turning length: 420 mm, Bar capacity: 51 mm, Max. workpiece weight:115 kg Travel X axis: 105+ 15 mm, Z axis: 460 mm, Spindle Spindle speed range: 4500 rpm, Chuck size: 170 mm, Type of spindle nose: A2-5 Through spindle hold diameter:62 mm Front bearing ID OD: 90/140 mm Rear bearing ID/OD:90/140 mm,

578

ID	MI7760
Make	Macpower
Model
YOM
Condition	Good Condition
Photo	See Photo
Between Center: 1000 mm

579

ID	MI7751
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) Hwacheon Eco31 1995 model Chuck 300mm Fanuc OT controller With Tailstock 2) HMT SKT25 1998 model Chuck 300mm Sinumerik controller With Tailstock 3) Torshalla 2005 model Chuck 300mm Turning length 1000mm Fanuc OiMate TC With Tailstock

580

ID	MI7750
Make	Doosan
Model	S280
YOM	2005
Condition	Good Condition
Photo	See Photo
WORKING CAPACITY Max Turning Diameter: 280 mm Max Turning Length: 330 mm Swing: 450 mm Distance Between Centers: 380 mm Chuck Equipped: 200 mm (KITAGAWA) CNC Control: Fanuc Oi-T (Alpha Drives) SPINDLE Max Rotation Speed: 4500 RPM Spindle Nose: A2-5 Spindle Bore: 61 mm Spindle Motor Power: 7.5 / 11 kW TAILSTOCK Tailstock Taper: MT 4 Tailstock Quill Stroke: 80 mm TURRET Turret: 10 Stations Tool Shank: 20 x 20 mm Parts Catcher, Tool Setter, Chip Conveyor, Manuals

581

ID	MA34665
Make	Okuma,Japan
Model	LB3000 EX CNC
YOM	November 2008
Condition	Good Condition
Photo	See Photo
Centers distance: 1000 mm Equipped with: With motorized tools FANUC Robot capacity 15 Kg Sub-spindle B-Axis tailstock Note: The machine is ten years old but has only few working hours. It is suitable for super finishing too.

582

ID	MI7749
Make	Cincinnati,USA
Model	CINTURN 15U
YOM	2002
Condition	working condition ,under power
Photo	See Photo \| See Video
Control : Fanuc 18i-t Condition : working Chuck Size: 15 inch & 18 inch Swing Over Bed: 28� (710mm) Max turning length: 100� (2540mm) & 80" (2000 mm) Turning Dia : 18 inch (457 mm ) Spindle Hole: 4� (100mm) Turret: 7 Position with 7 Position OD Crown Power Requirement: 25HP Equipped with: Heavy Duty Slant Bed Construction 3 Jaw Hydraulic & Pneumatic SMW AUTOBLOK Chuck Fanuc 18iT Control Hydraulic Tailstock Steady Rest Chip Conveyer

583

ID	MA34645
Make	Femco,Taiwan
Model	HL-35
YOM	2005/05
Condition	Good Condition
Photo	See Photo
Control: FANUC Oi-TC, Maximum turning diameter: 360mm, Maximum turning length: 642mm, Maximum spindle speed: 2,000 rpm, Spindle bore: 76mm, Spindle motor: 25 HP, 12 station turret, 10" hydraulic chuck, Programmable tailstock, Chip pan and chip conveyor, Coolant system, Automatic lubrication system, Box way heavy duty construction

584

ID	MI7722
Make	Zodiac
Model
YOM
Condition	Good Condition
Photo	See Photo
Fanuc OiTF CNC controller chuck dia : 200mm swing : 300mm Hydraulic Turret 8 station Automation Lubrication

585

ID	MA34563
Make	GILDEMEISTER
Model	NEF400
YOM	2007
Condition	Good Condition
Photo	See Photo
Turning diameter - 400mm Turning length - 650mm Spindle bore - 65mm Dimensions - 2600x1650x1800mm Weight - 2800kg

586

ID	MA34558
Make	Saeilo Contur
Model	MSL500MC
YOM	2013
Condition	Good Condition
Photo	See Photo
turning diameter max. 370 mm turning length 700 mm control Sinumerik 828D Siemens greates pass round over bed 620 mm swing diameter over slide rest 370 mm Main spindle: turning speed range - main spindle 10 - 3.500 min/-1 power capacity - main spindel 22 kW spindle diameter in front bearing 130 mm spindle bore 90 mm max. usable bar diameter 75 mm max. chucking diameter 300 mm spindle nose ISO A2-8 turret: number of toolpositions 12 pos. tool taper VDI 40 change-time tool to tool 0,34 sec Tool-Drive Ja / Yes axis stroke: x-axis 265 mm z-axis 770 mm C-Axis 360 � input unit 0,001 mm Tailstock: tailstock 650 mm diameter of quill 80 mm taper of center MK 5 25.05.2021 09:17:48 8 von 9 feeds: rapid traverse X/Z: 30 m/min total power requirement 30 kVA weight of the machine ca. 5,5 t dimensions of the machine ca. 5,0 x 3,0 x 2,6 m Documents Chip conveyor Coolantsystem hydraulic system Tool drive mechanisum Tailstock Signal-Light tool setter C-axis

587

ID	MA34557
Make	DMG Mori Seiki
Model	ALX 2000 MC
YOM	2020
Condition	Good Condition
Photo	See Photo
turning diameter max. 366 mm turning length 517 mm control M 730 UM SLIMLine Main spindle: turning speed range - main spindle max. 4.500 min/-1 power capacity - main spindel 22 / 15 / 11 kW spindle nose JIS A-6 spindle bearing diameter 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 � chucking diameter max. 250 mm axis stroke: x-travel 250 mm z-travel 575 mm C-Axis 360 � feeds: rapid traverse ( X / Y / Z ) 30 / - / 30 m/min rapid traverse C-axis 400 min/-1 turret: number of toolpositions 12 pos. 25.05.2021 09:17:48 6 von 9 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,25 sec. Driven Tool Positions: Spindle speed - driven tools max. 12.000 min -1 power capacity - driven tools 5,5 / 3,7 kW Tailstock: tailstock adjustment 498 mm taper of center MK 4 total power requirement - kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m Documents Chip-Tray Coolantsystem high pressure coolant 10 bar collet chuck SMW SP-1 KZS-MB 40 spindle oil cooler Turret Tool drive mechanisum Tailstock coolant pistol Signal lamp - 4 colour parts catcher tool setter

588

ID	MA34556
Make	Okuma,Japan
Model	Mac Turn 30
YOM	1999
Condition	Good Condition
Photo	See Photo
turning diameter 550 mm turning length 1000 mm control OSP 7000 L 4100 L turning dia. over bed 550 mm turning diameter over cross slideways 500 mm x-axis 430 mm z-axis 1090 mm y-axis 190 mm c-axis 0,001 � Drive 15/11 kW turning speeds 20-4500 U/min spindle bore 62 mm milling spindle 6.000 U/min tool change unit 40-fach tool taper SK 40 max. tool diameter 110 mm max. tool length 300 mm max. tool weight 10 kg total power requirement kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5,2x2,5x2,3 m

589

ID	MA34554
Make	Mori Seiki
Model	ZT 1500 Y
YOM	2004
Condition	Good Condition
Photo	See Photo
swing diameter max. 250 mm turning length max. 120 mm control MSX 501 max. turning diameter 190 mm standard turning dia. 170 mm distance between spindles 750 mm max. bar capacity 52 mm Main spindle: turning speed range - main spindle 60 - 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW max. Torque 198 Nm Number of speed ranges 1 spindle nose JIS A2-5 spindle bearing diameter 95 mm usable bar diameter max. 52 mm C-Axis 0,001 � Subspindle: Spindle speed range subspindle 60 - 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW max. Torque 198 Nm Number of speed ranges 1 spindle nose JIS A2-5 spindle bearing diameter 95 mm usable bar diameter max. 52 mm C-Axis 0,001 � Traverses Subspindle B: 525 mm turret: Number of Turret 2 number of toolpositions 2x 16 pos. Number of driven toolspositions 2x 16 pos. Shank height for square tool 20 mm Drill shank diameter 25 mm turret change time 0,2 sec. tool taper VDI 30 Spindle speed - driven tool stations max. 6.000 min -1 power capacity - driven tool-stations 5,5 / 3,7 / 2,2 kW axis stroke: x-axis 1+2: 140 mm y-axis 1: +/- 40 mm z-axis 1 / 2: 450 / 410 mm b-axis 525 mm feeds: feed speeds X 1/2: 18.000 mm/min feed speeds Y: 6.000 mm/min feed speeds Z 1/2: 24.000 mm/min feed speeds B: 24.000 mm/min rapid traverse X 1/2: 18 m/min rapid traverse Y: 6 m/min rapid traverse Z 1/2: 24 m/min rapid traverse B: 24 m/min rapid traverse C: 400 min/-1 Tipp feed X/Z/B: 0 - 5.000 mm/min total power requirement 73,9 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 6,5 x 3,0 x 2,5 m Documents Chip conveyor Coolantsystem C-axis Y-axis Subspindle tool setter Tool drive mechanisum bar feeder interface bar feeder KUPA collet chuck 2x Three Jaw Chuck 2x fixed tool-holders 43x live tool holders 37x Jaws Spindle-Reduction-Tubes 7x Signal-Light work light parts catcher Parts removal

590

ID	MA34532
Make	Litz
Model	LT400M
YOM	2011
Condition	Good Condition
Photo	See Photo
Travel X Axis Travel mm 180 Z Axis Travel mm 530 Spindle Spindle Rpm RPM 30-4000 Spindle Nose A2-6 Front Bearing Inner Diameter mm 100 Thru-Hole Diameter mm 63 Capacity Swing Over Bed mm 400 Swing Over Size mm 320 Center Distance mm 645 Standard Turning Diameter mm 218 Max Turning Diameter mm 320 Max Turning Length mm 530 Bar Capacity mm 52 Turret Capacity Turret 12-STATION Outer Diameter Size mm 25 Max Inner Diameter mm 40 Controller FANUC 0i-TD Tailstock Moving Travel Of Tailstock mm 435 tailstock Spindle Travel mm 100 Tailstock Spindle Taper MT5 Tailstock Spindle Diameter mm 90 Moving Speed X Axis Rapid Travel Speed M/min 20 Z Axis Rapid Travel Speed M/min 24 Motor Spindle Motor kw 11/15 X-Servo Motor kw 1.2 Z-Servo Motor kw 2.5 Turret-Servo Motor kw 1.2 Miscellaneous Power Requirement KVA 15 Coolant Capacity L 200 Machine Dimension Weight kg 4300 Length mm 2250 Height mm 1770 Width mm 1670

591

ID	MA34449
Make	Boley
Model	BC12
YOM	1999
Condition	Good Condition
Photo	See Photo
Control: Fanuc 21 ITA, Ikura Bar Top Short Magazine Bar Loader.

592

ID	MA34431
Make	Mazak,Japan
Model	SQT200MY
YOM	2001
Condition	Good Condition
Photo	See Photo \| See Video
Maximum Swing ... 20.67″ Maximum Cutting Diameter .. 11.81″ Maximum Cutting Length .. 21.1″ Spindle Speed ... 35-5,000 Rpm Spindle Nose ... A2-6 Spindle Bore ... 2.4″ Bar Capacity ... 2.0″ Spindle Indexing (C-Axis) .. 0.001 Deg -360,000 Positions Spindle Horsepower .. 25 H.P. Spindle Torque .. 245 Ft/Lbs. No. Of Tools ... 12 Position Drum (Non-Lift) Mill Spindle Speed .. 25-4,500 Rpm Mill Spindle Horsepower .. 5 H.P. X-Axis Travel ... 7.125″ Y-Axis Travel ... 4″ +/- 2.0″ Z-Axis Travel ... 2.75″ Rapid Traverse (X/Y, Z) .. 1,181 Ipm/472 Ipm Tailstock Spindle Travel/Body Travel. 5.91″ / 15.75″ Tailstock Quill Dia / Taper .. 3.14″ / Mt 5 Floor Space Requirements: 119″ X 70″ X 78.5″ H Approximate Machine Weight: 13,000 Lbs Equipped With: � Mazak Mazatrol 640T Cnc Control � Chip Conveyor � Tool Eye � Tailstock � Collet Nose - All Available Manuals

593

ID	MI7699
Make	LMW
Model	LL15TL3
YOM	2006
Condition	Good Condition
Photo	See Photo
Max. Turning Dia.- 265 mm Chuck Diameter: 200 mm Length: 300 mm Controller - Siemens Quantity: 4 nos

594

ID	MI7673
Make	Ecoco
Model	SJ35
YOM	1998
Condition	Good Condition
Photo	See Photo
With Stabilizer CPACITY- Dia 400/ 540mm Lengt

595

ID	MA34417
Make	Gildemeister,Germany
Model	CTX400
YOM	2000
Condition	Good Condition
Photo	See Photo
Distance between centres:550mm XZ travel:220x635mm Spindle speed:25-5000rpm Spindle bore:61mm

596

ID	MA34415
Make	Hyundai
Model	E160LMC
YOM	2015
Condition	Good Condition
Photo	See Photo
MAX SWING:18.9" MAX TURNING DIA.:7.5" MAX TURNING LENGTH:16.9" CHUCK SIZE:8" BAR CAPACITY:2" SPINDLE BORE:2.4" POWER 15 HP LIVE MILLING MOTOR 10.2 HP SPINDLE SPEED:4000 RPM MILLING SPINDLE SPEED:4500 RPM X-AXIS TRAVEL:6.5" Z-AXIS TRAVEL:18.1" SPINDLE NOSE:A2-6 TAILSTOCK:Yes QUILL TRAVEL 3.1" TAILSTOCK TAPER MT4 FEED RAPID TRAVERSE - X/Z AXIS 1181 IPM OPTIONS / EQUIPPED WITH C-AXIS (0.001� INDEXING) TAILSTOCK CHIP CONVEYER 1 - COAXIAL LIVE TOOLING HOLDER ER25 5 - O.D. TURNING HOLDERS 3/4" 4 - BORING BAR HOLDERS 1.25" 2 - PERPENDICULAR LIVE TOOLING HOLDERS ER25 1 - FACING HOLDER 3/4" 5 - BLANK PLUGS TO COVER EMPTY POCKETS IN TURRET MANUALS

597

ID	MA34412
Make	Haas
Model	SL30
YOM	2007
Condition	Good Condition
Photo	See Photo
Advanced against Conveyor Chuck dia 400 Between peak 800 Gearbox problem Gearbox has changed Machine weight approx. 7 tonnes

598

ID	MA34410
Make	Citizen
Model	M16
YOM	2004
Condition	Good Condition
Photo	See Photo
Machining Diameter: 5/8" Machining Length per Chucking: 7 3/4" (200mm) Drilling Diameter: 0.23" Maximum Threading Diameter (tap & die): M6 Main Spindle Speed: 200 - 10000 rpm Main Spindle Indexing: Full C-Axis Rotary Spindle on Gang Tool Post: Drilling Diameter: 0.19" (Tapping M4) Spindle Speed: 200 - 8000 rpm Rotary Spindle on Tool Turret Head: Drilling Diameter: 0.19" Threading Diameter: M5 Spindle Speed: 200 - 6500 rpm Backwork: Chucking Diameter of Backwork Spindle: 5/8" Backwork Length: 4.92" Drilling Diameter: 0.19" Threading Diameter: M5 Backwork Spindle Speed: 250 - 6000 rpm Spindle Indexing: Full C-Axis Equipped With: Iemca Bar Loader Cool Blaster High Pressure Unit

599

ID	MA34379
Make	Schaublin,Swiss
Model	110CNC
YOM	1997
Condition	Good Condition
Photo	See Photo
There are 2 such machines available. Swing over support - 115mm Center distance - 300mm Weight - 2100kg Control: Fanuc

600

ID	MA34374
Make	Tornos
Model	Deco 13
YOM	2003
Condition	Good Condition
Photo	See Photo
Power main spindle 3,7 Kw Main spindle bar diameter 13 - 16 mm sliding headstock travel (Z1) 180 mm Main spindle RPM 12000 Number of linear axes 10 Number of fixed tools Tool holder plate 4 Number of driven tools Tool holder plate 6 High coolant pressure yes Pressure value 20 bar System with external tank with filter yes Number of toolholders turrets/slides 1 Number tool posts on the 1th turret/slide 7 Number of fixed tool posts on the 1th turret/slide 4 Number of driven tool posts on the 1th turret/slide 3 Subspindle yes Sub spindle RPM 12000 Subspindle power 2,2 Kw Bar diameter 13 mm Number of Back fixed tool posts 6 Number of Back driven tool posts 6 Coolant used whole oil Barfeeder model and brand LNS Alpha 3T320

601

ID	MA34372
Make	GILDEMEISTER
Model	CTX400
YOM	1998
Condition	Good Condition
Photo	See Photo
2 machines available Diameter of rotation above the bench: 570 mm Diameter of rotation above the carriage: 420 mm Cross travel: 220 mm Longitudinal stroke: 635 mm Spindle bore diameter: 79 mm Chuck diameter: 220/250 mm Power: 21 kw Max torque: 240 N / M Spindle speed: 25-5000 rpm X axis rapid travel speed: 20 m / min Z axis rapid travel speed: 24 m / min Turret: 12 VDI 30 positions Automatic tailstock Diameter 80 mm Equipment included with the machine: Advanced against Parts collector Chip conveyor

602

ID	MA34367
Make	Mori Seiki
Model	SL-204SMC
YOM	2001
Condition	Good Condition
Photo	See Photo
Control: Mori Seiki MSG 805, Maximum machining diameter: 380mm, Maximum length: 600mm, Maximum bar diameter: 60mm, Turret positions: 12, Maintenance, Electrical and ladder diagram manuals are available

603

ID	MA34311
Make	Doosan
Model	PumaV400
YOM	2012
Condition	Good Condition
Photo	See Photo
SPINDLE SPEED:3000 RPM SPINDLE MOTOR:30 HP X-AXIS TRAVEL:10.6" RAPID RATE X AXIS:787 IPM Z-AXIS TRAVEL:19.2" RAPID RATE Z AXIS:787 IPM MAX TURNING LENGTH:18.1" MAX TURNING DIAMETER:19.5" TURRET TOOLING 12 Station MAX SWING:24" OPTIONS / EQUIPPED WITH FANUC I CHIP CONVEYOR NO CHUCK Quantity: 3nos

604

ID	MA34297
Make	O-M
Model	TDC16N
YOM	1997
Condition	Good Condition
Photo	See Photo
Fanuc-18T /T:φ1600 /2 pallet /max work Dia φ2000 /Height 1275 /Ram up-down (Z)900 /table index 0.001 degree / Cutting tools 12/ ATC 24

605

ID	MA34287
Make	Hyundai
Model	WIA-L400LC
YOM	New 2014
Condition	Good Condition
Photo	See Photo
Swing Over Bed:723.90mm Swing Over Carriage:535.94mm Max. Turning Diameter:558.80mm Max. Turning Length: 2100.58mm Bar Capacity: 116.84mm Spindle Bore: 129.54mm Spindle Speed:2000 RPM Spindle Motor:36.54 kw Spindle Nose: A2-11 X-Axis Travel:320.04mm Z-Axis Travel:2199.64mm Rapid Traverse Rate: 333.16 mm/sec Slide Type: Box Guide Tool Size, OD / ID: 30.48mm / 63.50mm Turret Indexing Time: 0.2 sec. Tailstock Taper: MT #5 Quill Diameter: 149.86mm Quill Travel: 132.08mm EQUIPPED WITH: Fanuc 32iA CNC Control 381.00mm Samchully Hydraulic Chuck SMW Hydraulic Steady Rest Tool Setter Chip Conveyor

606

ID	MA34255
Make	Okuma,Japan
Model	L1420
YOM	1997
Condition	Good Condition
Photo	See Photo
Control Type OSP-700L/IGF Swing:14.17″ Spindle:3200 RPM Chuck:12″ Equipped With Chip Conveyor IGF Programming

607

ID	MA34254
Make	Hyundai
Model	WIA3100LSMA
YOM	2019
Condition	Good Condition
Photo	See Photo
Control Type Fanuc I-Series Swing:29.5″ Length:49.2″ Spindle:3500 RPM & 4000 RPM Rotary Speed 4000 RPM Chucks 12″ & 8″ Equipped With Chip Conveyor Fanuc Robot Interface I/O Extension Auto Door 20 Bar Coolant Pressure Air Blow Thru Spindle Coolant Thru Drill Holder

608

ID	MA34252
Make	Mazak,Japan
Model	Slant50
YOM	1997
Condition	Good Condition
Photo	See Photo
Control Type Mazatrol T-Plus Swing:31.7″ Machining Length 120″ Spindle Speed:1600 RPM Chuck:20″ Equipped With;Chip Conveyor

609

ID	MA34251
Make	Mazak,Japan
Model	E1060V-8/II
YOM	2007
Condition	Good Condition
Photo	See Photo
Control Type Mazatrol Matrix Table:39.4″ Diameter Travels:73.82″ x 41.72″ x 52.95″ Swing:49.2″ Spindle Speed:500 RPM Rotary Speed 10,000 RPM Equipped With:120 ATC Coolant Thru Spindle (1000PSI) EIA/ISO Input Function EIA Simultaneous 5-Axis Manual Pulse Generator Tool Eye Re-Threading Thread Start Point Compensation Chip Conveyor

610

ID	MA34250
Make	Doosan
Model	PUMA240B
YOM	2006
Condition	Good Condition
Photo	See Photo
Control Type Fanuc 21T Swing:21.7″ Spindle Speed:4500 RPM Chuck:8″ Equipped With:Touchsetter Chip Conveyor

611

ID	MA34242
Make	Ikegai,Japan
Model	TU30
YOM	1997
Condition	Good Condition
Photo	See Photo
Fanuc 18T control Swing Diameter 25" Center Distance 40" Chuck 15" 3 Jaw Hydraulic Chuck Spindle Nose A2-8 Spindle Bore 4" Bar Capacity 3.5" Spindle Speed 3000 RPM HP 35 Turret Positions 12 Equipped With: Chip Conveyor

612

ID	MA34241
Make	Sunfirm
Model
YOM	2006
Condition	Good Condition
Photo	See Photo
Bed Width 26" Distance Between Centers 160" Gap Width 22" Max Swing Over Bed / Carriage / Gap 42" / 27" / 55" Rapid Traverse Rates (X / Z) 393 / 315 IPM Spindle Bore 7" Spindle Motor 35 / 30 HP Tailstock Taper MT#6 Tools 8 X-Axis Travel 26" Features: Fanuc 0i-TC CNC Control 7" Color LCD Manual 24" 4-Jaw Chuck (8) Position Turret Manual Tailstock Chip Conveyor Spindle Chiller Unit

613

ID	MA34240
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Siemens sinumerik 3 control 13" 3 jaw hyd chuck Turn dia 480mm Swing 495mm Center distance 1500mm Max turning length 1250mm Spindle bore 90mm Weight 8 tons

614

ID	MA34239
Make	Okuma,Japan
Model	GENOS L250e
YOM	2013
Condition	Good Condition
Photo	See Photo \| See Video
OKUMA OSP-P200LA-R CONTROL SWING OVER BED �� 17.72″ SWING OVER CARRIAGE��13.78″ SWING OVER CROSS SLIDE ��. 11.81″ MAX. TWORK LENGTH... 19.6″ X-AXIS TRAVEL ��. 6.299″ Z-AXIS TRAVEL ��. 18.504″ RAPID TRAVERSE X/Z ��. 787/984 IPM SPINDLE NOSE ��. JIS A2-6 SPINDLE BORE ��. 2.59″ SPINDLE SPEEDS �� 4500 RPM SPINDLE MOTOR �� 14.75 HP / 30 MINUTE TURRET CONFIGURATION �� 12 STATION TURRET INDEXING TIME �� .3 SECONDS OD TOOL SHANK ��. 1″ TAILSTOCK QUILL DIAMETER ��. 3.54″ TAILSTOCK TAPERED BORE ��. MT#5 QUILL TRAVEL ��. 3.94″ MACHINE DIMENSIONS �� 109″ X 61″ X 62″ TALL MACHINE WEIGHT ��.8,377 LBS

615

ID	MA34231
Make	Miyano
Model	BNC34S
YOM
Condition	Good Condition
Photo	See Photo
EQUIPPED WITH: Fanuc OT CNC Control with CRT, RS232 Spindle Load Meter, 6 Station Turret, Sub-Spindle, Heavy Duty Slant Bed Construction, Max Bar Capacity.... 1-1/4" Max Swing over the Cross Slide... 10.62" Max Length Spindle Nose to Spindle Nose.. 20" Max Turning Diameter.... 4-3/4" Cross Travel (X-Axis).... 3-7/8" Longitudinal Travel (Z-Axis)... 11-3/8" Number of Turrets.... 1 Turret Positions.... 6 Spindle Speed Range.... 170-5000 RPM Sub-Spindle Speed Range.... 170-5000 RPM Spindle Drive Motor.... 10 HP Approximate Machine Dimension(w/o Barfeeder).. 59" x 100" Approximate Machine Height... 67" Approximate Machine Weight... 6,200 LBS (4) machines are available, 3 of them are pictured

616

ID	MI7630
Make	Global
Model	Sinwey-2575
YOM	21/08/2019
Condition	Excellent
Photo	See Photo
Chuck dia : 250mm between centre : 700mm control :fanuc tf input voltage : 415 volts input power : 19kw spindle power : 12kw machine weight : 3900 kg

617

ID	MA34220
Make	Hernualt toyado
Model	HES52
YOM	1990
Condition	Good Condition
Photo	See Photo
NUM 750 Turret: 12 tools Distance between centers: 1150 Diameter on bench: 650 Diameter on carriage: 540 Spindle diameter: 80 Spindle speed: 4000 rpm With tools

618

ID	MI7614
Make	Haas
Model	SL10
YOM	2012
Condition	Good Condition
Photo	See Photo
CONTROL: HAAS CNC MAX SWING OVER BED: 16.25" MAX SWNG OVER SADDLE: 8" MAX TURNING DIAMETER: 11" MAX TURNING LENGTH: 16" SPINDLE SPEEDS: 6,000 MAX RPM HOLE THRU SPINDLE: 2.31" SPINDLE NOSE: A2-5 HOLE THRU DRAW TUBE: 1.81"

619

ID	MA34181
Make	ALPHA
Model	1550XS
YOM	2018
Condition	Good Condition
Photo	See Photo
Capacity: Height of centres 280mm Distance between centres 2000mm Swing over bed 554mm Swing in gap 830mm Gap width from face plate216mm Swing over cross-slide 370mm Spindle bore 104mm Spindle nose Camlock D1-11 Taper in Nose bush No.5 MT Spindle speed ranges (11-224 rpm) (1-672 rpm) (1-2000 rpm) Spindle motor S3 � 40% 15kW (15.0 hp) Constant power range 64 � 1970 (7.5kW) X-axis Working Stroke 296mm Width over bed ways 400mm Cross-slide travel 310mm Tailstock quill diameter 95mm Tailstock quill travel 145mm Tailstock quill taper quill No. 6 MT Complete With: Fanuc 0iTD Controller 3 & 4 Jaw Chuck 3 Point Steady Quick Change Tool post Manuals Toolholders

620

ID	MI7576
Make	Bernardi
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck : 300mm Center height : 300mm Swing; 600mm Admit ; 1200mm 6 stations turret Fanuc OT ( Alpha drives) Coolant, books , fully running

621

ID	MI7575
Make	Dean Smith & Grace
Model	CNC2817x90
YOM
Condition	Good Condition
Photo	See Photo
Phillips 3000 series CNC Control Swing over bed 710mm (28?) Swing over saddle 430mm (17?) Spindle speeds 40 ? 2200 rpm Main spindle motor 35hp (26kw) Spindle bore 92mm Di

622

ID	MI7574
Make	Okuma,Japan
Model	LC30
YOM
Condition	Good Condition
Photo	See Photo
Chuck size: 400mm Swing: 650mm Admit between : 1200mm okuma control

623

ID	MI7567
Make	Biglia
Model	11S3CNC
YOM
Condition	Good Condition
Photo	See Photo
chuck Admit; 400mm Fanuc Ot

624

ID	MI7566
Make	Daewoo
Model	Puma8UHS
YOM
Condition	Good Condition
Photo	See Photo
Fanuc OT Chuck : 200mm

625

ID	MI7565
Make	Giana,Italy
Model	610CNC
YOM
Condition	Good Condition
Photo	See Photo
Chuck: 400mm Swing: 700mm Admit : 1500mm 12 station Turret. (With new FANUC control of following specifications) FANUC OI TF new control with 3 year warrantee from FANUC (22

626

ID	MI7542
Make	Heyligenstaedt
Model
YOM	1998/2019
Condition	Good Condition
Photo	See Photo \| See Video
Max. Swing : 1120mm Max. Swing over Carriage : 960mm Between Centre : 3000mm Fanuc OiTF Control ( New Control with company Warranty, Oct.2019 ) 650mm 3Jaw Chuck Chip Conveyor

627

ID	MI7537
Make	Daewoo
Model	Puma6s
YOM	1995
Condition	Good Condition
Photo	See Photo \| See Video
Control : Fanuc OTC Chuck Size : 165mm Max. Turning Dia : 320mm Swing Over Bed : 500mm Between Centre : 450mm Spindle Speed : 60-6000 RPM Spindle Nose : A2-5 Tool Turret : 12nos Machine Dimensions : 91"x59"x64" Machine Weight : 8,140 lbs.

628

ID	MI7506
Make	Doosan
Model	--
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
Fanuc 200 dia chuck 12 tool turret 40 dia boring holder With tailstock Bar capacity 45.0mm Its now workibg 31.05 to 31.06 id tolerance

629

ID	MI7454
Make	Mori Seiki
Model	FRONTIER L
YOM	1998
Condition	Good Condition
Photo	See Photo
Control : Fanuc MSC521 Chuck Size : 200mm Between Centre : 500mm

630

ID	MA34006
Make	Mazak,Japan
Model	QT15N
YOM	1996
Condition	Good Condition
Photo	See Photo \| See Video
Control:MAZATROL T32-2 XZ travel:180x510mm Distance between centres:500mm Spindle bore:50mm 3-jaw chuck:205mm Spindle speed:4800rpm

631

ID	MA34005
Make	Mazak,Japan
Model	QT28N
YOM
Condition	Good Condition
Photo	See Photo
Control: MAZATROL T32-2 XZ travel:200x1020mm Max. turning length:1010mm 3-jaw chuck:250mm Toolchanger:8atc Spindle bore:70mm

632

ID	MA34004
Make	Mazak,Japan
Model	SQT200MS
YOM	2002
Condition	Good Condition
Photo	See Photo
Control: MAZATROL 640T Max. turning length:535mm 3-jaw chuck:160mm Spindle bore:60mm Toolchanger:16atc With bar loader

633

ID	MA33992
Make	Mazak,Japan
Model	SQT200M
YOM	1999
Condition	Good Condition
Photo	See Photo
CHUCK SIZE:8" Hydraulic SPINDLE BORE:2.40" SPINDLE NOSE:A2-6" TURRET TYPE :12 Position ROTARY TOOL SPINDLE:5 HP ROTARY TOOL SPEED:4,500 RPM SPINDLE MOTOR:25 HP RAPID TRAVERSE RATES:1180 IPM X-AXIS TRAVEL:7.48" Z-AXIS TRAVEL:22.64" MAX CUTTING DIAMETER:11.8" SWING OVER CARRIAGE:13.8" MAX SWING:20.6" TAILSTOCK QUILL DIA. / CENTER:3.15" / #5 MT Control:Mazatrol 640T Options/Equipped With FULL C AXIS SPINDLE ROTATION LIVE MILLING/DRILLING CAPABILITY AUTOMATIC TOOL EYE 8" 3 JAW HYDRAULIC CHUCK PROGRAMMABLE TAILSTOCK PARTS CATCHER COOLANT SYSTEM WITH TANK & PUMP HYDRAULIC UNIT ALL AVAILABLE TOOLING ALL AVAILABLE MANUALS

634

ID	MA33988
Make	Mazak,Japan
Model	QT10
YOM	1985
Condition	Good Condition
Photo	See Photo
CNC Mazatrol CAM T12- Lenght work mm 510- diametr in rotation mm 510-diametr work mm 300 N� TOOLS 8rpm 3600-spindle hool mm 56-

635

ID	MA33983
Make	Poreba Poland
Model	THC50X3000
YOM
Condition	Good Condition
Photo	See Photo
Max. turning diameter over bed: 720 mm Max. turning diameter over the cross slide: 520 mm Working length: 3000 mm Center height: 375 mm Max. weight of workpiece: 8000 kg Chuck diameter: 500 mm Spindle bore: 70 mm Main motor power 30 kW

636

ID	MI7439
Make	Macpower
Model	VX200Super
YOM	2016
Condition	Good Condition
Photo	See Photo
200/500

637

ID	MA33979
Make	Hass
Model	SL20
YOM
Condition	Good Condition
Photo	See Photo
lenght work mm 610-diametr in rotation 390-diametr work mm 242-Diameter chuck mm 203 rpm 4000- spindle hool mm 52-N� TOOLS 10

638

ID	MA33977
Make	Biglia
Model	B550
YOM	2004
Condition	Good Condition
Photo	See Photo
CNC Fanuc 18T- Lenght work mm 560-Diametr in rotation mm 580- diameter work mm 300 Spindle hool mm 65 -Kw 22- rpm 4000- n� tools 12-diameter chuck mm 250

639

ID	MA33976
Make	Biglia
Model	B550M
YOM	1995
Condition	Good Condition
Photo	See Photo
CNC Fanuc- Lenght work mm 500- Diametr work mm 500 -Spindle hool mm 70 rpm 4.000

640

ID	MA33975
Make	Doosan Daewoo
Model	Puma230
YOM
Condition	Good Condition
Photo	See Photo
CNC Fanuc 18T- Lenght work: mm 550-Diameter rotation mm 550-Diameter work: mm 330 spindle hool mm 65 n� of tools n� 10- Hour work n� 8200 -Chip evacuator

641

ID	MA33953
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) 19311 - 2007 DOOSAN PUMA 300LMC-ALPHA CNC LATHE WITH C AXIS AND LIVE TOOLING SWING OVER BED: 23" MAXIMUM CUTTING DIAMETER: 14" MAXIMUM CUTTING LENGTH: 53" BAR CAPACITY: 4.00" SPINDLE SPEEDS: 2800 RPM SPINDLE MOTOR: 30 HP WEIGHT (APPROXIMATE): 14,740 LBS. EQUIPPED WITH: FANUC 21i-TB CNC CONTROL C AXIS LIVE TOOLING / MILLING 3-JAW CHUCK 12 STATION TOOL TURRET TAILSTOCK LNS TURBO CHIP CONVEYOR 2) 19313 - 2011 DOOSAN LYNX 300 CNC LATHE SWING OVER BED: 26" MAXIMUM CUTTING DIAMETER: 18" MAXIMUM CUTTING LENGTH: 30" BAR CAPACITY: 3.00" SPINDLE SPEEDDS: 3500 RPM SPINDLE MOTOR: 20 HP WEIGHT (APPROXIMATE): 6,820 LBS. EQUIPPED WITH: FANUC i SERIES CNC CONTROL 3-JAW CHUCK 12 STATION TOOL TURRET TAILSTOCK 3) 19312 - 2007 DOOSAN PUMA 300C CNC LATHE SWING OVER BED: 22" MAXIMUM CUTTING DIAMETER: 16" MAXIMUM CUTTING LENGTH: 25" BAR CAPACITY: 4.00" SPINDLE SPEEDS: 2800 RPM WEIGHT (APPROXIMATE): 12,900 LBS. EQUIPPED WITH: FANUC 21i-TB CNC ONTROL 3-JAW CHUCK 12 STATION TOOL TURRET TAILSTOCK

642

ID	MI7436
Make
Model	DX200-3A
YOM	2018
Condition	Good Condition
Photo	See Photo
Chuck dia: 200 mm, Length: 300 mm, Control: Fanuc

643

ID	MI7434
Make	Doosan
Model
YOM	2001-2002
Condition	Good Condition
Photo	See Photo
CHECK DIA: 200 CUTTING LENGTH :500 WITH TAIL STOCK WITH OUT STABILIZER FANUC CONTROL

644

ID	MI7433
Make	PMT
Model	Supercut6N
YOM	2011
Condition	Good Condition
Photo	See Photo
CHECK DIA: 165 CUTTING LENGTH:300 WITH TAIL STOCK WITH OUT STABILIZER FANUC CONTROL

645

ID	MA33917
Make	Doosan
Model	PUMA400LB
YOM	2013
Condition	Good Condition
Photo	See Photo
Control : Fanuc Chuck dia. : 450 mm Spindle Speed (main/sub) : 2000 rpm Max. Working Dia. : 550 mm Max. Working Length : 2093 mm Bar Capacity : 116 mm Power on : 9136 Hrs Run time : 2064 Hrs Cut time : 1896 Hrs (Nov. 17, 2020)

646

ID	MA33912
Make	Mazak,Japan
Model	Multiplex610
YOM	1995
Condition	Good Condition
Photo	See Photo
Max Swing Dia: 350 mm Turning Dia: 150 mm Turning Length: 150 mm Bar Capacity Dia: 42mm Spindle Speeds 35 � 5000 RPM Main Motor 25/11 KW Collet Chucks on both Spindles & Part Catchers Short Magazine Bar Feed.

647

ID	MI7416
Make	Mori Seiki
Model	SL45B/1500
YOM
Condition	Good Condition
Photo	See Photo
Max turning dia: 490mm Max turning length: 1530mm Spindle speeds: 3-1500rpm Hollow spindle: 104mm Turret tool stations: 12 Control system: MSC 516 (Fanuc 16T Alpha Drives) With Chip Conveyor, Coolant Tank & Transformer

648

ID	MI7413
Make	Heylingstaedt
Model
YOM
Condition	Good Condition
Photo	See Photo
chuck : 650 mm (3 jaw ) Max. Swing : 1120mm Max. Swing over Carriage : 960mm Between Centre : 3000mm system : Fanuc OiTF New Control

649

ID	MI7410
Make	Yang
Model	ML55A
YOM	1998
Condition	Good Condition
Photo	See Photo
15" power chuck Swing over bed 720mm Max turning dia.: 550mm Distance between centres 1,200mm Spindle Bore 102mm ASA A2-8 2,000RPM spindle Tailstock 8 station turret with holders as per photos Swarf conveyor Manuals Control: Fanuc O-T

650

ID	MI7409
Make	Yang
Model	ML55A
YOM	1995
Condition	Good Condition
Photo	See Photo
15" power chuck Swing over bed 720mm Max turning dia.: 550mm Distance between centres 1,200mm Spindle Bore 102mm ASA A2-8 2,000RPM spindle Tailstock 8 station turret with holders as per photos Swarf conveyor Manuals Control: Fanuc O-T

651

ID	MI7395
Make	Jyoti,India
Model	DX200
YOM	2011
Condition	Good Condition
Photo	See Photo \| See Video
CONTROL � SEIMENS 802D MAX TURNING DIA � 300 MM SWING OVER BED - 500 MM CROSS (X-AXIS) TRAVEL � 200 MM LONGITUDINAL (Z-AXIS) TRAVEL � 500 MM RAPID FEED (X&Z AXIS) � 24 M/MIN SPINDLE BORE � 70 MM SPEED RANGE � 50-3500 RPM SPINDLE MOTOR POWER � 9/11 KW

652

ID	MI7394
Make	Joyti
Model	TMC250
YOM	2012
Condition	Good Condition
Photo	See Photo \| See Video
CONTROL � SIEMENS 828D SWING OVER BED � 600 MM MAX TURNING DIA � 480 MM MAX TURNING LENGTH � 700 MM X-AXIS TRAVEL (CROSS) � 250 MM Z-AXIS TRAVEL (LONGITUDINAL) - 700 MM RAPID FEED (X&Z AXIS) � 24 M/MIN SPINDLE MOTOR POWER (SIEMENS)� 15/11KW SPINDLE SPEED � 50-2500 RPM SPINDLE NOSE � A2-8

653

ID	MI7393
Make	Star
Model	SST16
YOM
Condition	Good Condition
Photo	See Photo
CNC CONTROL � FANUC OTT MAX TURNING DIA � 16 MM MAX HEADSTOCK STROKE IN ONE CHUCKING � 305 MM MAX DRILLING DIA � 8 MM MAX MILLING DIA � 10 MM MAX SLOTTING CAPACITY � 1.5X4 MM SPINDLE SPEED � 500-10000 RPM SPINDLE INDEXING � 15 DEGREE MAIN SPINDLE MOTOR � 2.2/3.7 KW NO. OF TOOLS � 9 ROTARY TOOLS � 2 ROTARY TOOL SPEED � 350-5000 RPM

654

ID	MA33864
Make	Haas
Model	ST45L
YOM	2019
Condition	Good Condition
Photo	See Photo
Hours: 5 Max. Swing: 34.5" (876 mm) Max. Turning Diameter: 25.5� Max. Turning Length: 80� Spindle Bore: 7.0" (178 mm) Motor: 40 hp (30 kW) Max. RPM: 1400 rpm, 2-speed gearbox - Spindle: A2-11 - Tool Positions: 12-station turret - Programmable tailstock - 15" color LCD monitor - USB port, - Color remote jog handle and rigid tapping. - High-Pressure Coolant, 1000 psi (69 bar) - Automatic Tool Presetter - Belt-Type Chip Conveyor - High-Intensity Lighting - 18" (457 mm) 3-Jaw Chuck - 6.5" (165 mm) draw tube thru-hole

655

ID	MA33846
Make	Haas
Model	HL2
YOM	1998
Condition	Good Condition
Photo	See Photo
Max Swing Over Bed..... 20" Max Swing Over Carriage.... 9.5" Max Machinable Center Distance... 24" Max Distance Between Centers... 20" Standard Chuck Size..... 8" Cross Travel (X-Axis)..... 8.45" Longitudinal Travel (Z-Axis).... 20" Rapid Traverse Rates.... 400 IPM Number of Turrets..... 1 Tool Positions...... 10 Total Spindle Bore...... 3" Bar Capacity...... 2" Spindle Nose..... A-6 Spindle Speed Range (Maximum)... 3750 RPM Spindle Horsepower..... 15 HP Electrics...... 208/230/3/60 Approximate Dimensions.... 126" x 70" Approximate Height..... 70" Approximate Machine Weight... 9,000 LBS EQUIPPED WITH: Haas CNC Control, Collet Chuck and 8" 3-Jaw Power Chuck, RS-232 Port, 3-1/2" Floppy Drive, 10 Position Turret, Tool Setter, Programmable Tailstock, Coolant System and Auger, Tooling.

656

ID	MA33819
Make	Citizen
Model	M12
YOM	1999
Condition	Good Condition
Photo	See Photo
Control:CINCOM 9-axis Number of c-axis:2 Turning diameter:14mm Counter-spindle diameter max.:12mm Turning length:200mm Max. spindle speed:12000rpm Spindle power:2.2kW Toolchanger:10atc Machine weight:2200kg With LNS TRYTON bar loader 12bars 7mm capacity 12bars 13mm capacity With parts conveyor With DONALDSON oil mist collector installed in 2004 Equiped with automatic firetrace-fire suppression system Complete with automatic tool breakage monitoring

657

ID	MA33799
Make	Hasegawa
Model	TUP25M
YOM
Condition	Good Condition
Photo	See Photo
Control: FANUC 21TB, Multisam Bar Loader, Accesories, With much tooling, Spindle indexing every 7.5 degrees.

658

ID	MA33781
Make	Hitachi Seiki
Model	Hitec Turn Seiki 23RIII-S
YOM	2000
Condition	Good Condition
Photo	See Photo
Magazine: Bar loader

659

ID	MA33778
Make	Harrison
Model	Alpha1550U
YOM	2006
Condition	Very good condition
Photo	See Photo
Swing over Bed 560mm Dia Cutting Dia 554mm Bed Length 1500mm Spindle Bore 90mm Dia Spindle Speed 15 � 1800 RPM Spindle Motor 11KW GE Fanuc 1000 CNC Controls 3 Jaw Chuck , 8 Station Turret, Turret Toolholders.

660

ID	MA33751
Make	Gildemeister,Germany
Model	Sprint65
YOM	2007
Condition	Good Condition
Photo	See Photo
Control: Fanuc 310i, Complete with bar feeder and tooling

661

ID	MA33744
Make	Tornos
Model	CT20
YOM	2019
Condition	Good Condition
Photo	See Photo
Control: Fanuc 01-TD, Axis: 5 Linear & 2 C-Axis, Main Spindle:- Maximum bar diameter: 20mm, Standard work piece length with guide bush: 210mm, Maximum spindle speed: 10000 rpm, Spindle power: 2.2 kW, C-Axis, Counter Spindle:- Maximum bar diameter: 20mm, Maximum parts length (without rear discharge): 80mm, Maximum spindle speed: 8000 rpm, Spindle power: 1.5 kW, C-Axis, TISIS tool management software, Mist Extraction, Robobar SBF-326 Magazine Barfeed, Tooling to be confirmed. Machine dimensions (LxDxH): 2050 x 1270 x 1670mm, Machine weight: 2400 kg,

662

ID	MA33732
Make	Hessapp
Model	DVH450E
YOM	2008
Condition	Good Condition
Photo	See Photo
Maximum turning diameter: 450 Turret: 12 rotating tools 14 pallets diameter: 450 Spindle diameter: 155 Vertical and horizontal strokes: 450 x 450 Chip conveyor and collector Spindle speeds: 4000 rpm FANUC 21i TB

663

ID	MA33709
Make	Dainichi
Model	MR65-8000
YOM	1990
Condition	Good Condition
Photo	See Photo
Fanuc 6 T old model With two hydraulic steady rest

664

ID	MA33647
Make	Citizen
Model	M32V
YOM	2011
Condition	Good Condition
Photo	See Photo
- Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Travel : 325 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 3.7/7.5 [kW] - C axis indexing precision : 0.001 [�] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 410 [mm] - X stroke : 238 [mm] - Spindle speeds : 7000 [rpm] - Spindle power : 1.5/3.7 [kW] - C axis indexing precision : 0.001 [�] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 120/202 [mm] - Y stroke : 44 [mm] - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] - X/Y stroke : 108/275 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2805 x1370 [mm] - Machine height : 1370 [mm] - Machine weight : 3970 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M635 - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Chips conveyor : COMBISTREAM - Coolant tank : COMBILOOP [l] * with high-pressure pump : 15 [bars] - Predisposition for barfeeder - Oil mist extractor : ELBARON - Electric transformer : 400V

665

ID	MI7300
Make	Biglia
Model	B.500/SM
YOM
Condition	Good Condition
Photo	See Photo
Control : FANUC 0-T Turning length : 500 mm Turning diameter : 520 mm. X-axis : 225 mm. Z-axis : 510 mm. Spindle taper : ASA 6. Spindle bore : 80 mm. Turning speed : 4000 rpm. Approx. weight of the machine : 4200 Kg.

666

ID	MA33500
Make	Nakamura
Model	WT 250MM
YOM	2005
Condition	Good Condition
Photo	See Photo
Swing Over Bed 16" Turning Diameter, Shaft Diameter 15.34", 9.84", Machining Length 17.12" Chuck Size 1, 2 CB 65MM, CB 54MM Spindle Nose 1, 2 A2 - 6, A2 - 6 Spindle Bore Diameter 1, 2 3.15", 3.15" Spindle Bar Capacity 1, 2 2.56", 2.54" Spindle Speeds 1, 2 4500, 4500 RPM Spindle Horsepower 1, 2 35, 35 HP X - Axis Travel 1, 2 7.67" Z - Axis Travel 1, 2 18.9" C - Axis Travel 1, 2 .001, .001 Rapid Traverse Rates X1, X2 472, 472 IPM Rapid Traverse Rates Z1, Z2 945, 945 IPM Rapid Traverse C Axis 25 RPM Turret Configuration 1, 2 24, 24 Turret Rotary Tool Spindle Speed 1, 2 3600, 3600 RPM Turret Rotary Tool Horse Power 1, 2 7.5, 7.5 HP Machine Weight 19,140 LBS Equipped with (2) 24 POSITION TURRETS .001 C - AXIS INDEXING ON BOTH SPINDLES ABNORMAL LOAD DETECTION AIR BAG FUNCTION BAR FEED INTERFACE CHIP CONVEYOR FANUC 18ITB CNC CONTROL HIGH PRESSURE COOLANT SYSTEM HIGH VOLUME COOLANT AND HIGH PRESSURE COOLANT TANKS LNS BLAZE AIR RIGHT BAR RECEIVER LNS QUICK LOAD SERVO S3 SHORT MAGAZINE BAR FEED MANUAL GUIDE EYE CONVERSATIONAL PROGRAMMING MICROCENTRIC CB 65MM FRONT AND SUB SPINDLE N-T NURSE TOOL MONITOURING FUNCTION N-T TORQUE NAVIGATOR FOR PART AN DATUM POINT RECOGNITION

667

ID	MA33496
Make	Gildemeister,Germany
Model	CTX410
YOM	2006
Condition	Good Condition
Photo	See Photo
320 x 600 mm Bore 65 mm 12 x turret Live tooling C Axis Tail stock

668

ID	MA33488
Make	L&L
Model	LD48
YOM	2012
Condition	Good Condition
Photo	See Photo
Swing over bed: 1220 mm. Swing over cross slide: 670 mm. Distance between centres: 3000 mm. Spindle Bore: 153 mm. Width of bed: 610 mm. Tail stock taper MT6. Motor Fanuc 30/37 Kw. Fanuc 0i-TD Control. 625 mm dia. Front & Rear 4 Jaw Chucks. 3 x Steadies . Rotary Front V8 Toolpost. Rear H 6 Toolpost.

669

ID	MA33465
Make	Mori Seiki
Model	ZT2500Y
YOM	2005
Condition	Good Condition
Photo	See Photo
Make - Mori Seiki Model-ZT2500Y Specifications: Max. Swing Over Bed: 27.7" Max. Swing Over Cross Slide: 16.5" Max. Distance Between Centers: 51.2" Max. Turning Diameter: 15.3" (Main) / 14.1" (Secondary) Standard Turning Diameter: 10.2" Max. Turning Length: 13.7" Spindle Speeds: 40 - 4000 RPM Spindle Motor (30 Min. / Continuous): 30 / 25 HP Spindle Through Hole: 3.5" Subspindle Travel: 38" C-Axis Indexing: .001� Spindle Bearing Inner Diameter: 5.1" Rotary Tool Spindle Speed: 4,000 RPM X-Axis Travel (Turret 1 / Turret 2): 11" / 7.9" Y-Axis Travel (Upper Turret Only): +/- 2.8" Z-Axis Travel (Turret 1 & Turret 2): 37.8" Equipped With: Fanuc MSC-501 CNC Control Live Milling LNS Hydro Sprint Bar Loader LNS Blaze Air Unloader (1) 12-Position Upper Turret (1) 12-Position Lower Turret (6) Live Tools Included Mayfran Chip Conveyor Chip Blaster Transformer Mist Buster

670

ID	MA33449
Make	Traub
Model	TNA500
YOM	1996
Condition	Good Condition
Photo	See Photo
Control: TX 8F � 1x jaw chuck 315 mm bore 85 mm � 2 sets of jaws � tailstock � chip conveyor � 88100 operating hours � Push coolant system � operating tool � Bezel 35-240 mm Technical details: Turning diameter 680 mm Center distance 1000 mm Spindle speed 2800 rpm. Spindle bore 80 mm

671

ID	MA33447
Make	Biglia
Model	B600
YOM	1993
Condition	Good Condition
Photo	See Photo
Cnc : FANUC 15T Maximum piece � : 355 mm Max. rotating diameter : 560 mm Maximum length of the piece : 650 mm Spindle revolutions : 3200 rpm Spindlebore : 56 mm Turret : 12 station Dimension : 4,1x1,7x1,75 mt. Weight : 5500 Kg cad system for self-programming

672

ID	MA33446
Make	Okuma,Japan
Model	LB15 II
YOM	1992
Condition	Good Condition
Photo	See Photo
Cnc : FANUC OSP 5020L Maximum piece � : 530mm Maximum length of the piece : 500 mm Spindle diameter : 100 mm Spindle revolutions : 4500 rpm Spindle bore : 62 mm Turret : 12 station Hours to work : about 30.000 Accessories : Yes

673

ID	MA33445
Make	Nakamura
Model	TMC4
YOM	1988
Condition	Good Condition
Photo	See Photo
Cnc : FANUC 6T Maximum piece � : 560mm Maximum length of the piece : 675 mm Spindlebore : 65mm Spindle revolutions : 42-3000 rpm

674

ID	MI7259
Make	Dorries Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Turning dia: 1260 mm, Height: 895 mm, Swing: 1400 mm, Table dia: 1260 mm, Cross rail adjustment: 1000 , Load capacity: 58 ton

675

ID	MI7258
Make	Mori Seiki
Model	SL7M/C
YOM
Condition	Good Condition
Photo	See Photo
Turning dia: 700 Dia x 1600 mm Length between center, Swing over bed: 800 mm, Swing over cross slide:600 mm, Center height: 400 mm, Spindle range: 10-1800 rpm

676

ID	MI7255
Make	Monfort,Germany
Model	RNC
YOM
Condition	Good Condition
Photo	See Photo
Turning dia: 275 mm, Length between center; 1270 mm, Height of center: 220 mm, Swing over cross slide: 280 mm, Swing over bed: 375 mm,

677

ID	MI7254
Make	Monfort,Germany
Model	FNC600
YOM
Condition	Good Condition
Photo	See Photo
Turning dia: 575 mm, Swing over bed: 600 mm, Swing over cross slide: 400 mm

678

ID	MI7253
Make	German
Model
YOM
Condition	Good Condition
Photo	See Photo
ravers Burg machine Turning dia: 950 mm, turning dia over cross slide: 950 mm

679

ID	MI7251
Make	Monfort,Germany
Model	FNC600
YOM
Condition	Good Condition
Photo	See Photo
Turning dia: 575 mm, Swing over bed: 600 mm, Swing over cross slide: 400 mm

680

ID	MA33368
Make	Craven,UK
Model
YOM
Condition	Good Condition
Photo	See Photo
Weight of machine 526 ton Swing over saddle 153�� (3899 mm) (now CNC 3000 m/m max) (3200 mm with cross-slide covers off) Swing over bed 170�� (4331 mm) Centre height 81�� (2070 mm) Between centres * 67�(20422 mm) sum of 2 unequal lengths * 33�6� (10211 mm) equal lengths Max loading 85 ton (HS) 50 ton (TS) 64 ton (rollers) Head stock face plate Dia. 11� (3353 mm) 8 jaws Tail stock face plate Dia. 8� (2438 mm) 4 jaws Tool section 3� (76 mm) dp x 2�� (63.5 mm) wide Main motor 250 hp, 350/900 rpm/ Head stock Speeds 1st gear 0 � 12.5 rpm 2nd gear 12 � 38 rpm Feeds Sliding Surfacing 0-2 mm Double ended function Weight limit: 170 ton Between ctrs: 93� (28346 mm) 2 motors to give 500 hp Max. travel of top slides � 35� (889 mm) Boring bar 15� (4572 mm) app. Reach Steadies 20� (508 mm) / 128� (3251 mm) Max. weight on head stock center 85 ton Max. weight on tailstock centre 50ton (more on tailstock dogs) Max. revs for carbide tools 10revs/min Headstock chuck Max. grip O/D Max. grip I/D Min. grip O/D 101� (2565 mm) 130� (3302 mm) 10� (254 mm) Tailstock chuck Max. grip O/D Max. grip I/D Min. grip O/D Min. grip I/D 65� (1651 mm) 87� (2210 mm) 10� (254 mm) 32� (813 mm) Bed width 14� (4267 mm) Machine is not under power and the CNC system is broken, the machine is ideal for reconditioning / re-build

681

ID	MA33366
Make	Nakamura Tome,Japan
Model	TMC 5
YOM
Condition	Good Condition
Photo	See Photo
Maximum turning diameter 635 mm Maximum turning length 1100 mm Through spindle bore 90 mm Control Fanuc 6 T Kitagawa B-18 18″ Dia 3 jaw chuck, Tailstock, 12 Station Turret, Turret tooling,

682

ID	MA33362
Make	Star
Model	KNC25
YOM
Condition	Good Condition
Photo	See Photo
cnc: fanuc Spindle Hole: mm 25 Complete with bar pusher

683

ID	MA33361
Make	Star
Model	KJR16B
YOM	1990
Condition	Good Condition
Photo	See Photo
Control YASNAC in 5 axes (X-Y-Z-C and B) Turning diameter max 16 mm Headstock spindle speed 300-10000 rpm Spindle attachment Schaublin F20 Main spindle motor 2,2 kW / 3,7 kW Turret Twin turret - number of tools 6 stations turret x 2 = 12 X-Power-driven attachment - spindle speed 225-4500 rpm Y-Power-driven attachment - spindle speed 225-4500 rpm B-Back working attachment - spindle speed 225-4500 rpm 3-Spindle unit ER11 C-Axes unit Weight approx 2300 kg Accessories 17 Tool holders 5 Tool holders motorized 1 Fire-extinguishing device CO2 Instruction book

684

ID	MA33360
Make	Traub
Model	KNC150
YOM
Condition	Good Condition
Photo	See Photo
cnc: Traub Mitsubischi Lenght work ax X: mm 250 Lenght work ax Z: mm 300 Diametr cjuck:mm 110 Spindle Hole : mm 25 Power alimentation: 380 v- 50 hz Rpm: rpm 5.000 Power motor: kw. 7,5 N� of tools:n� 8 Complete with bar pusher

685

ID	MI7247
Make	Hakushui MT
Model	HTL80
YOM	2007
Condition	Good Condition
Photo	See Photo
Maximum Swing : 480mm Standard Turning diameter : 216mm Maximum Turning diameter : 320mm Maximum Turning length : 520mm Travel : X axis travel 180mm z axis travel 530mm

686

ID	MI7243
Make	Lokesh
Model	VML 50
YOM
Condition	Good Condition
Photo	See Photo
ControllerSiemens802D Tablesize : 800x400mm X : 650 mm Y : 400 mm Z : 400 mm Atc20tools,Bt40,spindle rpm8000.with staplazer

687

ID	MI7242
Make
Model	ACE LT20
YOM
Condition	Good Condition
Photo	See Photo
2018 Full Reconditioned Chuck Dia : 200 MM ABC : 550 MM Control : Siemens 828 D

688

ID	MI7241
Make	Hitachi Seiki
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dai : 250 MM ABC LENGTH : 500 MM Control : Fanuc 10T With Stabilizer , Tooling , Manual's , Chip Conveyor

689

ID	MA33291
Make	Takisawa,Japan
Model	TS 400YS
YOM	2016
Condition	Good Condition
Photo	See Photo
� 5-axis lathe with driven tools, with counterspindle � 82 mm spindle bore � Chuck diameter 250 mm � Length 750 mm � Spindle speed 4200/6000 rpm. Accessories: � Rotary holder one-sided - 2 pcs - 750, - � / pcs � Knife holder - 7 pcs - 200, - � / pcs � Drill holder - 3 pcs - 150, - � / pcs � Collet holder - 1 pc - 1100, - � / pcs � Collets - 10 pcs - 80, - � / pcs � Rotary holder perpendicular - 2 pcs - 930, - � / pcs � Holder holder - 18 pcs - 10, - � / pcs � Small collet holder - 1 pc - 95, - � / pc � Large collet holder - 1 pc - 95, - � / pc � Chuck jaws - 15 sets - 9, - � / set

690

ID	MA33219
Make	Doosan
Model	S280N
YOM	2004
Condition	Good Condition
Photo	See Photo
with Fanuc 0iT Control, 200 mm 3 Jaw chuck, Tail Stock, 280 mm max machining diameter, 420 mm between centres, 10-Station Turret, Quick Tool Setter, 2 Jaw Chuck, Tooling, Manuals, Jaws, Swarf Conveyor

691

ID	MA33124
Make	Gildemeister,Germany
Model	CTX400
YOM	1995
Condition	Good Condition
Photo	See Photo
Swing diameter: 500 mm Centre distance: 640 mm Control: Gildemeister EPL 2 Plan path: 212 mm Chuck diameter: 200 mm Speed: 1-4000 rpm Connection: 380V/ 7,5 KW

692

ID	MA33123
Make
Model
YOM	2013
Condition	Good Condition
Photo	See Photo
Capacity : Max.swing dia.over bed mm Φ400 Max.swing dia.over carriage mm Φ260 Recmd turning dia./length mmΦ165/400 Max.turning length mmΦ285 Max.bar diameter mmΦ42 Spindle : Hyd.chuck dia. mmΦ165 Type of spindlen nose A2-5(GB/T5900.1) Spindle bore diameter mm Φ 57 Bearing dia.(front/rear) mm Φ90/Φ80 Spindle speed r/min 70-3000 Spindle motor power kW 7.5 Tailstock : Quill diameter/travel mm Φ70/80 Quill taper MT No. 4 Carriage : Slant angle DEG 45 � X/Z travel mm 165/410 X/Z rapid traverse rate m/min 12/16 X/Z servo motor torque Nm 11/20 X/Z ball screw dia. mm Φ28/Φ40 Turret : Number of stations 8/12 Tool Size(turning / boring) mm 20�20/Φ32 Others : Power source kVA 35 Dimensions(L�W�H) cm 254X167X166 Gross weight kg 3000 Quantity : 2 Pcs

693

ID	MA33101
Make	Index
Model	GFG250
YOM	1983
Condition	Good Condition
Photo	See Photo
Turning diameter 250 mm Turning length 500 mm Spindle passage 65 mm 16-speed revolver chip conveyor Control:Control Siemens Quantity: 2 nos

694

ID	MA33091
Make	Goodway
Model	TS150
YOM	2008
Condition	Good Condition
Photo	See Photo
Controller: FANUC Oi-TC Chuck: 6 inches Tool: 8 tools Speed: 6000rpm Cutting diameter: 200mm Cutting length: 290mm Maximum diameter: 400mm Mechanical weight: 1750KG

695

ID	MA33081
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1x Heid S200 1x Heid S315 1 x Okuma 1x Traub

696

ID	MA33069
Make
Model
YOM
Condition
Photo	See Photo
EEN 320, EEN 400 model are intended for processing parts like bodies of revolution in a semi-automatic cycle. The cutting tool is installed in the 6-position tool head. The part is fixed in the cartridge. EEN 320, EEN 400 RMC, mm: 770 Elongated, mm: 1270 Center height, mm: 190 Turning diameter over the carriage, mm: 380 Turning diameter over the cross-member, mm: 158 Average height of a moving spindle, mm: 1100 Diameter of processing, mm: 360 Length of longitudinal stroke, Z axis, mm: 750 (1250) Length of the cross course, axis X, mm: 225 Carriage Width, mm: 1280 Inner cone of the movable spindle: M6 Diameter of the channels of the movable spindle, mm: 55 Moving spindle power, kW: 11 The maximum moment, Nm: 650 Maximum cutting force, kN: 10 Maximum feed force, kN: - X: 3 - Z: 5 The maximum weight of the part when processing in the mount of the headstock, kN: 1.5 The number of revolutions of the main drive (3 steps), rpm: 40 . 2800 Weight, kg: 2250/3400 Dimensions, mm: 1620 x 1170 x 2700 / 3400

697

ID	MI7206
Make	Mazak,Japan
Model	M70
YOM
Condition	Good Condition
Photo	See Photo
Two machines available. With tailstock one number With out tailstock one number Two new Mitsubishi M70 packages available System Axis Motor With drives Retrofit 50,% completed

698

ID	MA33045
Make	Star,Japan
Model	SH12
YOM	2003
Condition	Good Condition
Photo	See Photo
Control: Fanuc 21t, 12 mm capacity, With documentation, Ikura bartop barloader

699

ID	MA33033
Make	RFM
Model	RC32
YOM	2011
Condition	Good Condition
Photo	See Photo
Machining Capacity Max. Turning Diameter: � 32 mm Pull Type Fuji 32 � 30 mm Push Type index 30 � 80 mm 5�Hydraulic Chuck Max. Turning Length:60 mm Spindle Through Hole:� 45 mm Draw Tube: � 35 mm Motor Drive: SYNTEC Motor drive: Syntec LNC Mitsubishi Fanuc 4.4 kw 4.0 kw 3.7/5.5 kw 3.7/5.5 kw Max. Speed: 6000 rpm Axis: Type Linear X-axis Stroke:210 mm Z-axis Stroke:200 mm X-axis Servo Motor: 0.75 kw Z-axis Servo Motor: 0.75 kw X/Z-axis Rapid Speed:20 m/min Tools No. of Tools: 6 Turning Tool □16 mm (Opt. □12mm、□20mm) Drill Shank � 20 mm General: Hydraulic Unit: 0.75 kw Coolant Tank Capacity: 110 L Coolant Pump: 0.56 kw Floor Space: L800 x W1680 x H1800 mm Weight: N.W. 1720 kg N.W. 1520 kg Power Supply: AC / 3PH / 220V / 8kw CNC Controller :SYNTEC / LNC / MITSUBISHI / FANUC Standard Accessories Turning Tool: Air Blow Drill Holder: Warning Light Drill Shaft:Working Light Auto Safety Door: Tool Kit Box Optional Accessories: 5�Hydraulic 3 Jaw Chuck: Spindle Inner Coolant Coolant Mist Collector: Spindle Inner Stopping Bar 30/70 bar High Pressure Coolant Pump: Spindle Inner Pushing Bar Oil Skimmer:Chip Conveyor Bar Feeder V-65E Bar Diameter � 5.0mm～� 65mm High loading speed, specially developed design. No special requirements or restrictions on material straightness. Accommodate raw bars. Lathe spindle speed can be maximized. Material can be round, hexagonal and shaped. Large magazine loading capacity reduces bar supply frequency. Easy to operate and maintain, small footprint. Various parameter setting, alarm detection and function display.

700

ID	MA33010
Make	Mazak,Japan
Model
YOM	2018
Condition	Good Condition
Photo	See Photo
Machine control: Mazatrol SmoothC CNC Bed 250 mm (universal) Max. spindle speed 4000 min-1 Main spindle power 11 kW Main spindle chuck 8 "through chuck B-218A0615 (51 mm pass) Standard Accessories: Tap transformer SD Memory Interface (1 port) + USB Interface (1 port) Set of Adjustment Tools Tool Holder Set (6) Anchor pads 8 Position Drum Head (Bolt On Type) Incl. feeder 1) FMB Turbo 5-65 / 3200 A The passage of material 5-65 mm Power consumption 2.5 kW Bar length 500 - 3200 mm Feed rate. power variab max 750 N Feed rate 1000 mm / sec Weight 1800 kg Operating voltage 400 V Control Voltage 24 Press. air 6 bar Noise max 48 + -5 dB Machine is still in warranty till 30.4.2020. Price is including bar feeder, dismantling and loading on the truck.

701

ID	MI7196
Make	Doosan
Model
YOM
Condition	Good Condition
Photo	See Photo
670 Diameter 1850 long Slant bed Fanuc 18T Controller

702

ID	MA32991
Make	Hankook
Model	Protec 7NB
YOM	2016
Condition	Good Condition
Photo	See Photo
SWING OVER BED 29" (737mm) SWING OVER CARRIAGE 18" (457mm) CENTER DISTANCE 157" (4000mm) SPINDLE BORE 6.8" MOTOR 15/18.5 kW OPTIONS / EQUIPPED WITH SQUARE AUTO TOOL POST 18� AIR CHUCK SAMCHULLY CHIP CONVEYOR FANUC 0ITF CONTROLLER

703

ID	MI7194
Make	Leadwell,Taiwan
Model	GTC20
YOM
Condition	Good Condition
Photo	See Photo
EQUIPPED WITH: - MITSUBISHI CNC CONTROL - TOOLSETTER - 8" 3-JAW HYDRAULIC CHUCK - 12 POSITION TURRET - TAILSTOCK Chuck Size 203.2 mm Bar Capacity 50.8 mm # Axis 2 Power 11.2 kW Max RPM 5000 rpm Turning Dia 299.7 mm Swing 378.5 mm Machining Length 629.9 mm Tailstock Yes

704

ID	MI7193
Make	Daewoo
Model	Puma8s
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Max Turning Diameter .. 14.2? Max Turning Length .. 14.6? Max Swing Over Bed / Carriage . 19.7? / 10.8? X-Axis Travels ... 7.9? Z-Axis Travels ... 15? Spindle Speed .. 50-5000 RPM Spindle Motor .. 20 HP Spindle Nose ... A2-6 Spindle Bore ... 2.44? Turret Stations .. 12 POSITIONS Tailstock Taper .. MT#4 Machine Dimensions (L x W x H) . 90.5? x 70.5? x 67.9 Machine Weight ... 8317 LBS Equipped With: Fanuc OT CNC Control 8" 3-Jaw Hyd. Chuck Tool Presetter Tailstock

705

ID	MI7192
Make	Daewoo
Model	PUMA10HC
YOM
Condition	Good Condition
Photo	See Photo \| See Video
SWING OVER BED . 19.7" MAX. TURNING DIA. . 14.6" MAX. TURNING LENGTH . 20.7" MAX. BAR WORKING DIA. . 2.9" CHUCK SIZE .. 10" SPEEDS .. 35-3500 RPM SPINDLE NOSE .. A2-8 SPINDLE BORE .. 3.38" MOTOR POWER .. 25/30HP TAILSTOCK QUILL DIAMETER . 3.75" TAILSTOCK QUILL STROKE . 3.94" TAILSTOCK TAPER .. MT#4 X-AXIS TRAVEL .. 8.3" Z-AXIS TRAVEL .. 21.7" RAPID TRAVERSE X/Z . 470/630 IPM TURNING TOOL SIZE . 1" BORING TOOL SIZE . 1.5" APPROX. WEIGHT . 10,560 EQUIPPED WITH: - FANUC 0T CNC CONTROL - 10" 3-JAW HYD. CHUCK - 10 STATION TURRET - TAILSTOCK - CHIP CONVEYOR - ALL AVAILABLE TOOLHOLDERS

706

ID	MI7191
Make	Takamaz
Model	X-10
YOM
Condition	Good Condition
Photo	See Photo \| See Video
MAX BAR CAPACITY . 1.37" (35mm) SPINDLE NOSE .. A2-5 SPINDLE THROUGH HOLE DIA. . 1.81" (46mm) MAX. ROTATION SPEED . 3,500 RPM NUMBER OF TURRET STATIONS . 8 SPINDLE MOTOR .. 7.5 HP APPROX. WEIGHT .. 4800 LBS EQUIPPED WITH: TAKAMAZ FANUC 21-TB CONTROL HYDRAULIC COLLET CHUCK PARTS CATCHER, PARTS CONVEYOR CHIP CONVEYOR ALL AVAILABLE MANUALS

707

ID	MA32944
Make	GILDEMEISTER
Model	CTX200 S2
YOM	2007
Condition	Good Condition
Photo	See Photo
TurnPlus extension control Few operating hours (+/- 10,000h) Technical details / extensions / accessories: Max. Diameter processing 210 mm Max. Length machining 350 mm Control EP 4290 Heidenhain Main axis: Machining rotation - main axis 25-5000min / -1 Capacity - main shaft 7.5 kW Maximum load 72 Nm Chuck diameter max 170 mm Main shaft bearing 85 mm Turret: Number of positions for tools 12 pos. axle race: x- 160mm stroke z- race 350mm Mobile doll / shaft knife holder Power supply required: 36 kVA Weight: 3.5 T Dimensions: 4.5x2.5x2.0 m

708

ID	MA32915
Make	WMW Niles ,Germany
Model	N22
YOM	1996
Condition	Good Condition
Photo	See Photo
Diameter: 400 mm, Working length: 630 mm, Swing over bed: 520 mm, Axes: X- 300 mm, Y- 840 mm, Work piece weight: 400 kg, Hole in spindle: 85 mm, Machine weight cca: 6,8 t Control: Simmons

709

ID	MA32875
Make	Okuma,Japan
Model	Mac Turn 50CNC
YOM	2001
Condition	Good Condition
Photo	See Photo
Control: OSP 7000 With Helicoidal interpolation DNC RT OPTIONS IGF Power control, Swing over bed : 610 mm, Swing over slide : 580 mm, Turning diameter : 580 mm, Turning length : 1500 mm, C axis: 360� (0.001�), B axis: 360� (1�) Hydraulic tailstock with Morse 5 taper, Swarf conveyor, Auto Tool Changer (ATC): 50 Positions, Spindle latper: BT50

710

ID	MI7162
Make	Tatung(taiwan)
Model	TL 2800H
YOM	1992
Condition	Good Condition
Photo	See Photo
Check size 300 MM hydraulic Control fanuc OT.C ABC 2800 MM With chipconver and sterdi

711

ID	MA32796
Make	Mazak,Japan
Model	Slant Turn 450
YOM
Condition	Good Condition
Photo	See Photo
Dia: 716 x Center distance: 2000 mm 12 inch 3 jaw Hydraulic chuck, Control: Mazatrol Fusion 640T

712

ID	MA32792
Make	VDF Boehringer
Model
YOM	1985
Condition	Good Condition
Photo	See Photo
Turning diameter: max. 700 mm Circulation diameter: max. 750 mm Turning length 2000 mm Spindle power: 65 kW � 60% ED -15 Speed range: Stage I: 7 - 700 r / min / Stage II: 700 - 2,000 r / min Torque: max. 3,650 Nm Spindle bore: 132 mm Feed drive: Feed rate: 0.1 - 10.000 mm / min Rapid traverse speed: 10 m / min Tooling system: Tool turret with 12 receptacles on the right VDI 60 Tailstock: Quill adjustment: hydraulically via foot switch program or manually Clamping force: 25 kN Quill stroke: 130 mm Quill diameter: 130 mm Pinoleggel-Gr .: MK5 Total power requirement: 155 kVA Machine power: 400 V - 50 Hz Machine dimensions (L / W / H): 5,365 x 2,145 x 2,855 mm Machine weight approx .: 23 t (switch cabinet is attached to the machine) Domestic equipments: bezel Chucks SMW: KRS NZ 315, clamping range: 50 - 310 chip conveyor

713

ID	MA32790
Make	Traub
Model	TNA-500
YOM	1999
Condition	Good Condition
Photo	See Photo
Travel Z-axis: 1,070 mm Max. Circulation � over bed: 680 mm Max. Circulation � via slide guide: 445 mm Tip width / turning length: 1,250 mm (- 160 mm chuck) Spindle passage of the work spindle: 80 mm Diameter in the front bearing: 140 mm Max. Torque: 545 Nm Max. Torque (S2): 769 Nm Spindle head: A8 according to DIN55026 tool magazine Type of magazine: 1x revolving drum �500 mm Tool holders: VDI 40 according to DIN 69880 Max. Tool length: 390 mm at � 50 mm Powered tools: no Number of tool places: 12 Coolant supply � Full-flow cooling of the machine with water-miscible cooling lubricant 8%, 3.5 bar � Internal coolant supply through tool holder � Supply for IK with 30 l / min at 11.5 bar by booster pump Machine weight: 6,800 kg Dimensions LxWxH: 5.5 x 2.3 x 2.2 m (without additional equipment) Connected load: 42 kW (400V, 50Hz) Transport dimensions and weights: Machine: L = 5,500 mm B = 2,300 mm H = 2,150 mm M = 7,000 kg Chip conveyor: L = 4,500 mm W = 650 mm H = 1,600 mm M = 600 kg Extraction: L = 1,200 mm B = 800 mm H = 1,100 mm M = 300 kg Hydraulic group size: L = 600 mm B = 800 mm H = 900 mm M = 250 kg

714

ID	MI7155
Make	OMG
Model
YOM
Condition	Good Condition
Photo	See Photo
Center Height - 400 mm Length of Job - 1500 mm Swing Dia. Over Cross-slide - 500 mm -CNC Control will have to changed.

715

ID	MA32767
Make	DMG
Model	CTX510EcoLine
YOM	2009
Condition	Good Condition
Photo	See Photo
Max. Turning diameter: 680 mm Longitudinal axis (Z): 1050 mm CNC: Siemens Spindle speed: 3250 rpm Engine power: 33 kW Grommet: 71 mm Tower: VDI 40 No tool positions: 12, max. 6 motorized grasshopper chip conveyor bar package Spindle head VDI 40 Spindle caliber Number of lathe heads Number of tools on the lathe head Number of rotating tools Adjustable speed 3250 rpm Shaft motor power 33.0 kW Tailstock yes

716

ID	MI7142
Make	Daewoo
Model	Puma12
YOM
Condition	Good working condition
Photo	See Photo
Capacity: Max Turning Diameter: 380 mm Max Turning Length: 770 mm Max Bar Capacity: 77 mm Swing Over Bed: 565 mm Distance Between Centers: 914 mm X Axis Travel: 200 mm Z Axis Travel: 800 mm Rapid Traverse X Axis: 480 IPM Rapid Traverse Z Axis: 630 IPM Spindle Nose: A2-8 Spindle Bore: 90 mm Spindle Speed: 15 � 3000 RPM Spindle Motor: 30 HP

717

ID	MI7141
Make	Campro
Model	CPL20
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia : 200 mm Admit : 600 mm Year : 2007 Control : FANUC Oi Mate TC With Tailstock Machine in Excellent Condition. With STABILIZER

718

ID	MI7139
Make	Daewoo
Model	PUMA-12
YOM
Condition	Good Condition
Photo	See Photo
Max Turning Diameter: 380 mm Max Turning Length: 770 mm Max Bar Capacity: 77 mm Swing Over Bed: 565 mm Distance Between Centers: 914 mm X Axis Travel: 200 mm Z Axis Travel: 800 mm Rapid Traverse X Axis: 480 IPM Rapid Traverse Z Axis: 630 IPM Spindle Nose: A2-8 Spindle Bore: 90 mm Spindle Speed: 15 � 3000 RPM Spindle Motor: 30 HP

719

ID	MI7137
Make	Daewoo Puma
Model	Puma12L-C
YOM
Condition	Good Condition
Photo	See Photo
Chuck Size: 16.5" Max Diameter Bar Capacity 5.2" Max Swing Over Bed / Carriage: 22.4" / 14.6" Max Turning Diameter: 19" Max Machining Length: 40.2" Spindle Speed: 20 - 2000 RPM Spindle Bore: 5.2" Spindle Nose: A2-11 Spindle Motor:35 / 30 HP Spindle Torque: 1009 ft. lbs. Tools: 12 Rapid Traverse Rates (X / Z): 480 / 630 IPM X-Axis Travel: 10.2" Z-Axis Travel: 41.3" Tailstock Taper: MT#5 Machine Dimensions (L x W x H): 141" x 87" x 89" Machine Weight: 17,380 lbs. Fanuc ot

720

ID	MA32690
Make
Model
YOM	2004
Condition	Good Condition
Photo	See Photo
Gang type 6 in Chuck Fanuc io mate minimum purchase one 40 ft load With Chip conveyor Total quantity 20 pcs

721

ID	MI7123
Make	Takang,Taiwan
Model	TA32
YOM
Condition	Good Condition
Photo	See Photo
TA32 Chuck ; collet type chuck. Linear Toolings Fanuc OTC Control alpha drives. Coolant Tank Manuals.

722

ID	MI7122
Make	Goodway
Model	TA32
YOM
Condition	Good Condition
Photo	See Photo
Chuck ; Collet type chuck. Linear Toolings Fanuc OTC Control alpha drives. Coolant Tank Manuals.

723

ID	MI7121
Make	Hitachi Seiki,Japan
Model
YOM
Condition	Good Condition
Photo	See Photo
200 dia, 300 abc Fanuc 60

724

ID	MI7120
Make	Hardinge
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck dia: 165 mm, 350 ABC 12 Station Servo Turret 5 live tools 6000 spindle RPM Lm guideways Fanuc 18T Control Alpha drives Chipconvyer Coolant Tank Transformer Manuals

725

ID	MI7115
Make	Chevalier,Taiwan
Model	1840S
YOM
Condition	Good Condition
Photo	See Photo
Swing over Bed - 460 mm Distance between Centers - 1000 mm Swing over Cross-Slide - 230 mm Spindle Speeds - 40 rpm to 2800 rpm CNC Control - Siemens 810D Year of Make - 2003 Complete with lots of accessories & tooling. Complete with operating manual, electrical drawings etc.

726

ID	MA32604
Make	Daewoo
Model	Puma200
YOM	1998
Condition	Good Condition
Photo	See Photo
Max Turning Diameter: 13.78? Max Turning Length: 15.75? Max Bar Capacity: 2.56? Swing Over Bed: 20.08? X Axis Travel: 9.53? Z Axis Travel: 17.32? Rapid Traverse X Axis: 787 IPM Rapid Traverse Z Axis: 1000 IPM Spindle Nose: A2-6 Spindle Bore: 2.99? Spindle Speed: 45 � 4500 RPM Spindle Motor:: 20 / 15 HP Turret Capacity: 12 Tools Turret Index Time: 0.5 Second Tailstock Taper: MT-4 Tailstock Quill Dia.: 2.95? Tailstock Quill Travel: 3.15? Electrics: 220v / 3-Phase Overall Dimensions: 105? x 64? x 69? H Weight: 8800 lbs Equipped With: Mitsubishi Meldas 520L Tailstock

727

ID	MI7112
Make	Tornado
Model	Tornado300
YOM	1995
Condition	Good Condition
Photo	See Photo
Swing over bed : 530 mm Swing over cross-slide : 330 mm Distance centre tot centre : 500 mm Max longitudinal travel : Z-axis 20 m/min Max cross travel : X-axis 10 m/min Spindle cone : A2-8 Dia of spindle bore : 90,5 mm Power on the spindle : 22 kW Number of speeds : 4000 rpm Command Fanuc : GE Fanuc Series O-T Total power needed : 53 kVa Weight : 3,3 ton Toolchanger : yes Number of tools : 12 tools

728

ID	MI7111
Make	MAZAK
Model
YOM
Condition	Good Condition
Photo	See Photo
Length :1500 mm Diameter : 300 mm

729

ID	MI7110
Make	Hwacheon
Model	Hi-Eco11
YOM
Condition	Good Condition
Photo	See Photo
Chuck dia - 200mm ABC - 500mm 8 Stations turret Telstock available Control - Fanuc OT Condition: Working But Not Under Power

730

ID	MI7109
Make	Victor
Model	VTurn20
YOM	2003
Condition	Excellent
Photo	See Photo
Chuck dia - 200mm X�Axis travel - 650mm Z�Axis travel - 300mm Spindle speeds - 6000rpm 10 Stations AC Servo turret Telstock available Cnc Fanuc OTD

731

ID	MA32581
Make	Swiss
Model	Manurhin KMX413
YOM	2006
Condition	Good Condition
Photo	See Photo \| See Video
Max turning diameter 16 mm Driven tools

732

ID	MA32519
Make	Mazak,Japan
Model	Integrex400Y
YOM	1999
Condition	Good Condition
Photo	See Photo
Main Spindle Chuck: 10" Maximum Swing: 24.01" Maximum Cutting Diameter: 24.01" Main Spindle HP: 30/40 HP Main Spindle RPM: 3000 RPM Main Spindle Nose: A2-8 Main Spindle Bore: 3.46" Spindle Taper: KM 63 Milling Spindle HP: 20 Milling Spindle RPM: 6000 RPM Number of Tool Stations: 40 X Axis Travel: 22.83" Y Axis Travel: +/- 4.13" Z Axis Travel: 43.11" Rapid Traverse Rate X: 1181 IPM Rapid Traverse Rate Y: 591 IPM Rapid Traverse Rate Z: 1181 IPM Rapid Traverse Rate C: 400 RPM Tailstock Body Travel: 36.22" Tailstock Center Stroke: 5.12" Tailstock Center Control: Mazatrol Fusion 640T Equipped With: Chip Conveyor

733

ID	MA32518
Make	Mazak,Japan
Model	Integrex30y
YOM	1996
Condition	Good Condition
Photo	See Photo
Main Spindle Chuck: 10" Maximum Swing: 20" Maximum Cutting Diameter: 20" Maximum Machining Length: 40" Main Spindle HP: 30/ 35 HP Main Spindle RPM: 3500 Main Spindle Nose: A2-8" Main Spindle Bore: 3.46" Spindle Taper: CAT 40 Number of Tool Stations: 20 X Axis Travel: 17.75" Y Axis Travel: +/- 3.54" Z Axis Travel: 42" Rapid Traverse Rate X: 472 IPM Rapid Traverse Rate Y: 393 IPM Rapid Traverse Rate Z: 708 IPM Rapid Traverse Rate C: 100 RPM Tailstock Body Travel: 33.98" Tailstock Center Stroke: 5.12" Tailstock Center Machine Weight: 14,300 Lbs. Control: Mazatrol T-Plus Equipped With: Chip Conveyor

734

ID	MA32517
Make	Mazak,Japan
Model	Integrex 200IIIST
YOM	2004
Condition	Good Condition
Photo	See Photo
Main Spindle Chuck: Collet Maximum Swing: 26" Maximum Cutting Diameter Maximum Machining Length: 40" Maximum Bar Size: 2" Main Spindle HP: AC 20/30 Main Spindle RPM: 5,000 Main Spindle Nose: A2-6 Main Spindle Bore: 2.99" Main Spindle Min. Indexing Increment: 0.0001 Deg. Spindle Taper: KM 63 2nd Spindle HP: AC 20/25 2nd Spindle RPM: 5,000 2nd Spindle Bore 2nd Spindle Chuck: Collet Max Distance Between Spindles Number of Tool Stations: 40 Maximum Tool Diameter: 3.54" Max Tool Adjacent Pockets Empty: 4.72" Maximum Tool Length: 9.84" Maximum Tool Weight: 22 lbs Lower Turret Positions: 9 X Axis Travel: 22.83" Y Axis Travel: +/- 3.15" Z Axis Travel: 41.1" B Axis Travel: 225 Deg. C Axis Positioning W Axis Travel: 41.34" Rapid Traverse Rate X Rapid Traverse Rate Y Rapid Traverse Rate Z Rapid Traverse Rate C Tailstock Body Travel Tailstock Center Stroke Tailstock Center Floor Space Control: Mazatrol Fusion 640MT Pro Equipped With: Microcentric CB65-ND/A6 Collet Chuck Automatic Parts Catcher Workpiece Conveyor for parts Catcher Thru Hole Chuck Package for 2nd Spindle Chip Conveyor Mazak Super Flow II ( 1000 PSI ) Upper Turret 213 PSI Lower Turret Coolant Temperarture Control System Iemca VIP 80E Barfeed Overload Detection Tool Breakage Detection Inside The Magazine

735

ID	MA32516
Make	Mazak,Japan
Model	Integrex 200IISY
YOM	2001
Condition	Good Condition
Photo	See Photo
Main Spindle Chuck: 8" Maximum Swing: 21.25" Maximum Cutting Diameter: 21.25" Maximum Machining Length: 39.5" Maximum Bar Size: 2" Main Spindle HP: 20/ 30 Main Spindle RPM:5000 RPM Main Spindle Nose:A2-6 Main Spindle Bore: 2.4" Spindle Taper: KM 63 2nd Spindle HP: 10 2nd Spindle RPM: 5000 2nd Spindle Chuck: 6" Number of Tool Stations: 40 X Axis Travel: 20.87" Y Axis Travel: +/- 3.15" Z Axis Travel: 42" B Axis Travel: 225 Deg. C Axis Positioning: 0.001 Deg. Rapid Traverse Rate X:1181 IPM Rapid Traverse Rate Y: 590 IPM Rapid Traverse Rate Z: 1299 IPM Rapid Traverse Rate C: 400 RPM Control: Mazatrol Fusion 640MT Equipped With: Chip Conveyor

736

ID	MA32503
Make	MAZAK
Model	QT20
YOM	1985
Condition	Good Condition
Photo	See Photo \| See Video
Turning length 1000 mm Max. swing 508 mm Max. turning dia 300 mm Spindle speeds 3000 rpm Spindle bore 65 mm Turret w/8 stations Motorpower 18 Kw Control: Mazatrol T2 Equipped with: 6 tool holders

737

ID	MA32452
Make	Voestalpine
Model	WHC300S
YOM	1992
Condition	Good Condition
Photo	See Photo
Turning length - 1120 mm Longitudinal carriage travel - 1240 mm Cross carriage travel - 220 mm Workpiece's diameter - 470 mm All acessories, including ones for milling work are available

738

ID	MA32437
Make	Emco
Model	Turn 325 II
YOM	2003
Condition	Good Condition
Photo	See Photo
Workpiece's diameter - 250 mm Center distance - 405 mm Turning diameter - 85 mm Bar diameter - 25.5 mm Weight - 8000 kg

739

ID	MA32253
Make	Colchester
Model	CNC2000
YOM
Condition	Good Condition
Photo	See Photo
Height over bench - 400mm Height over carriage - 246mm Center distance - 1250mm Spindle bore - 54mm Weight - 2360kg

740

ID	MA32207
Make	Nakamura
Model	WTY250
YOM	1988
Condition	Good Condition
Photo	See Photo
CNC Fanuc 18 i 2 spindles with C axis, 2 x 12 position tool heads ( driven) Top turret with Y axis Spindle bore 65 and 43 mm Measuring probe Bar feeder FMB SL 65 Working hours 27519 h

741

ID	MA32195
Make	Niles-Simmons
Model	N50MC-6000
YOM
Condition	Good Condition
Photo	See Photo
NOMINAL TURNING LENGTH(mm) : 6,000 SWING-�(mm) : 1,250(Over Cross slide) 1,300(Over Bed) WORKING HEIGHT(mm) : 1,700 CNC-CONTROL : SINUMERIK Si840D TOOL MAGAZINE 48 POSITIONS SPINDLE ACTIVE

742

ID	MA32133
Make	Monfort,Germany
Model	MNC 5
YOM
Condition	Good Condition
Photo	See Photo
Technical details attached in photos.

743

ID	MA32083
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1 x Okuma LB25 CNC Lathe + Loading Robot, Year: 1991, Serial number: 03030972. 1 x Okuma LB25M CNC Lathe + Loading Robot, Year: 1994, Serial number: 06110082. C-Axis. + 1 spare robot for parts. + 1 pallet of static and live tool holders. Quantity: 2 nos.

744

ID	MA32052
Make	Hurco
Model	TM8i
YOM	2018
Condition	Good Condition
Photo	See Photo
Control: Max 5 Max Swing Over Bed: 21.6" Max Swing Over Carriage: 11.8" Cross Travel (X-Axis): 8" Longitudinal Travel (Z-Axis): 20" Spindle Bar Capacity: 2" Spindle Nose: A2-6 Spindle Speed: 4,800 RPM Spindle Motor: 22 HP Turret Tool Positions: 10 Machine Dimensions: 116"L x 91"W x 80"H Machine Weight: 8,500 LBS

745

ID	MA31910
Make	Mori Seiki
Model	TL40/2000
YOM	1988
Condition	Good Condition
Photo	See Photo
Swing over Bed: 620 mm, Swing over Cross Slide: 380 mm, Distance Between centres: 2100 mm, RPM: 25 - 2,500 rpm, Tailstock diameter: 150 mm, Turret: 8 station, Hydraulic Steady: SMW, Controler: FANUC FAPT TURN 10 T, Chip conveyor, FANUC Red Cap motors and Absolute Encoders

746

ID	MA31897
Make	Traub
Model	TNS26DGY
YOM	1991
Condition	Good Condition
Photo	See Photo
Automatic lathe, turning and milling CNC Traub TNS 26DGY with Y axis, barstock IEMCA MINI BOSS 325 CNC Machine still in production, can be seen during work. Turning length max 270 mm Spindle passage 30 mm Main spindle 7.5 kW, oś C Turret 1 axis: X, Z, Y, driven tools Turret 2 axis: X,Z, driven tools Nkeo7 Sub spindle 3.7 kW - axis C and axis Z (V) Connected power 35 Kw Weight ab. 3600 kg + barstock IEMCA ok 1000kg Full documentation

747

ID	MA31885
Make	Harrison
Model	Alpha550U
YOM	2002
Condition	Good Condition
Photo	See Photo
Turning diameter: 284/370 mm, Turning over bed: 554 mm, Distance between: 2032 mm centers Through the : 102 mm spindle, Revolutions rpm: 1800 rpm, tailstock, Additionally accessories, steady and etc., Control: Fanuc control

748

ID	MA31870
Make	Tsugami,Japan
Model	NP32
YOM	1991
Condition	Good Condition
Photo	See Photo
The lathe is in working conditions. Turrets - 2 Tools in a turret - 6 Min/Max turning diameter - 8/32 mm Travels X, XZ, Z1, Z2 - 85, 115, 215, 215 mm Spindle rotations - 35.4500 rpm

749

ID	MA31846
Make	GILDEMEISTER
Model	CTX-310
YOM	2007
Condition	Good Condition
Photo	See Photo
Controller: SIEMENS 840D powerline Max. swing dia.: 505mm Swing over cross slide: 365mm X/Z axis travel: 202/450mm Chuck size: 8� (3jaw) Spindle speed: 5,000rpm (Built-in) Bar capacity: �51mm Tool capacity: 12 Tailstock taper: MT4 Air conditioner for electrical cabinet Chip conveyor

750

ID	MI7042
Make	Japan
Model	ACT-3
YOM
Condition	Good Condition
Photo	See Photo
Swing Over Bed:465, Equipped With : Fanuc Series 15-T Controller, Distance Between Centers: 606mm, Max Turning Length:586mm , Spindle Nose: A2-6, Spindle Bore: 59mm, Spindle Speeds: 35 � 3500 RPM, Spindle Motor: 15 HP, Turret Type: Bi-Directional 10 Station, X-Axis Travel: 157mm, Z-Axis Travel: 606mm, Approx. Shipping Weight: 9,000 Lbs., Approx. Shipping Dimensions: 120″ L x 68″ W x 84″ H, X-Axis Rapid: 317.92 IPM, Z-Axis Rapid: 476.88 IPM, Tailstock Quill Diameter: 3.18″, Electrical: 240V/3PH, USED CNC TURNING CENTER, USED CNC LATHE.

751

ID	MA31801
Make	Johnford
Model	HT100E2D
YOM
Condition	Good Condition
Photo	See Photo
Swing over bed: 680 mm, Swing over cross slide: 590 mm, Distance between centers: 2460 mm, Spindle speeds: auto 4 steps, Max. spindle speed: 750 RPM, Spindle motor: 40/50 HP, Spindle nose: A2-15 Spindle bore: 232.5 mm, X axis travel:315 mm, Z axis travel: 2460 mm, X axis rapid traverse: 472 IPM, Z axis rapid traverse: 590 IPM, Tailstock travel: 2165 mm, Tailstock quill travel: 1975 mm, Tailstock spindle taper: MT7 Equipped with: FANUC 18i-TB CNC control, 24"3 Jaw front mount SMW air chuck, 12 Position upper tool turret, SMW autoblock Steady REST, Taistock, Lower slide with boring bar mounting block for I.D.threading, Coolant system, Chain type chip conveyor, Auto lube with alarm, halogen work light. Quantity: 2 no

752

ID	MI7038
Make	Yang
Model	ML 25
YOM
Condition	Good Condition
Photo	See Photo
CHUCK DIA 250. ABC 500. TAILSTOCK. FANUC OT. CHIP CONVEYOR. 8 STATION HYDRO.

753

ID	MI7035
Make	Pride-Jaguar
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck size:200 Turning Lenthe 500 Control :Fanuc oi -TF

754

ID	MA31701
Make	Doosan
Model	Puma MX2000ST
YOM	2007
Condition	Very good condition
Photo	See Photo
Max turning length: 1020 mm Max turning � : 540 mm Bar capacity : 65 mm Spindle nose A2-6 C-Axis 0.001� Spindle speeds ~ 5000 rpm Spindle power 22 kW Subspindle speeds ~ 5000 rpm Subspindle power 22 kW Milling spindle speeds ~ 10000 rpm Milling spindle power :18.5 kW Toolchanger capacity :20 Tool taper Capto C6 Lower revolver BMT 65P Tool capacity 12 (all driven) Driven tools speeds ~ 4000 rpm Machine weight :12500 kg Dimensions ca. :4520 x 2300 x 2600 mm

755

ID	MA31676
Make	Mazak,Japan
Model	Nexus450-II
YOM
Condition	Good Condition
Photo	See Photo
Swing over bed: 830 mm, Swing over carriage: 520 mm, Max machining dia: 570 mm, Max. machining length" 1997.5 mm, Bar cap: 162.25 mm, X axis travel: 312.5 mm, Z axis travel: 2085 mm, Spindle speed: 2000 RPM, Spindle motor: 40/50 HP, Spindle nose: A2-15, Spindle bore: 182 mm, Equipped with: Control: Mazatrol matrix nexus 2 cnc 213 PSI high power coolant (10 GPM), 12D/24 position drum turret Programmable tailstock (MT5 Built in live center) Tool eye Absolute positioning system, Additional coolant nozzle (above headstock), 21" Pratt burnerd 4-jaw independent chuck (Rear), 20" Pratt burnerd 3- jaw chuck (Rear), Jorgensen chip conveyor Note: Less than 500 cutting houres

756

ID	MA31660
Make
Model	CK6152/3000 mm
YOM
Condition	Brand New
Photo	See Photo
Swing over bed: 520 mm, Swing over carriage: 300 mm, Pan of guide way: 400 mm, Spindle nose: A2-8 Spindle bore: 80 mm, Taper hole of spindle: 86.1.20 Range of spindle speeds: 25~200 14~1600 35~1600 r/min, Center height from bed: 270 mm, Chuck: 250 mm, Min feed increment: 0.001/0.001 mm, Rapid speeds: 4000/5000 mm, Max. travel of X: 280 mm, Turret working position: V4 Indexing time: 2.4 s Indexing repeatility: 0.008 mm, Section of tool shank: 25 x 25 mm, Dia /travel of tailstock: 85/150 mm, Taperhole of tailstock: Morse5 mm, Work piece accuracy: IT6-IT7 Surface roughness: Ra1.6 um, Main power: 7.5 kw, Control: Fanuc of Siemens

757

ID	MA31659
Make
Model	CK6152/2000 mm
YOM
Condition	Brand New
Photo	See Photo
Swing over bed: 520 mm, Swing over carriage: 300 mm, Pan of guide way: 400 mm, Spindle nose: A2-8 Spindle bore: 80 mm, Taper hole of spindle: 86.1.20 Range of spindle speeds: 25~200 14~1600 35~1600 r/min, Center height from bed: 270 mm, Chuck: 250 mm, Min feed increment: 0.001/0.001 mm, Rapid speeds: 4000/5000 mm, Max. travel of X: 280 mm, Turret working position: V4 Indexing time: 2.4 s Indexing repeatility: 0.008 mm, Section of tool shank: 25 x 25 mm, Dia /travel of tailstock: 85/150 mm, Taperhole of tailstock: Morse5 mm, Work piece accuracy: IT6-IT7 Surface roughness: Ra1.6 um, Main power: 7.5 kw, Control: Fanuc of Siemens

758

ID	MA31658
Make
Model	CK61100E/6000
YOM
Condition	Brand New
Photo	See Photo
Swing over bed: 1000 mm, Swing over carriage: 630 mm, Max. work piece length: 1500 3000 5000 mm, Max. turning length: 1230 x 2730 x 4730 mm, Spindle nose: A215 Manual: 1000 Spindle bore: 130 mm, Taper hole of spindle: 1.20/140 mm, Spindle speed and range:3.15~315r/min, Center height from bed: 500 mm, Min feed increment of X-Z axis: 0.001/0.001 mm, Rapid speeds of X-Z axis: 300 /6000 mm Max. travel of X axis: 520 mm, Turret working position: V4 Indexing time: s 2.6 Indexing repeat ability: 0.01 mm, Section of tool shank: 40 mm Diameter of tailstock quill: 160 mm, travel of tailstock quill: 300 mm, Taper hole of tailstock quill: Morse 6 Accuracy and acceptance condition Workpiece accuracy: IT6~IT17 Surface roughness: Ra1.6 Acceptance contion: JB/T8324.1 Main power: 22 kW, Machine overall dimensions Length: 4500 x 6000 x 8000 mm, Width: 2435 mm, Height: 2300/2600 mm, Machine mass: 9000 kg. Control: Fanuc or Siemens

759

ID	MA31657
Make
Model	CK61100E/6000
YOM
Condition	Brand New
Photo	See Photo
Swing over bed: 1000 mm, Swing over carriage: 630 mm, Max. work piece length: 1500 3000 5000 mm, Max. turning length: 1230 x 2730 x 4730 mm, Spindle nose: A215 Manual: 1000 Spindle bore: 130 mm, Taper hole of spindle: 1.20/140 mm, Spindle speed and range:3.15~315r/min, Center height from bed: 500 mm, Min feed increment of X-Z axis: 0.001/0.001 mm, Rapid speeds of X-Z axis: 300 /6000 mm Max. travel of X axis: 520 mm, Turret working position: V4 Indexing time: s 2.6 Indexing repeat ability: 0.01 mm, Section of tool shank: 40 mm Diameter of tailstock quill: 160 mm, travel of tailstock quill: 300 mm, Taper hole of tailstock quill: Morse 6 Accuracy and acceptance condition Workpiece accuracy: IT6~IT17 Surface roughness: Ra1.6 Acceptance contion: JB/T8324.1 Main power: 22 kW, Machine overall dimensions Length: 4500 x 6000 x 8000 mm, Width: 2435 mm, Height: 2300/2600 mm, Machine mass: 9000 kg. Control: Fanuc or Siemens

760

ID	MA31617
Make	Harrison
Model	Alpha330S
YOM
Condition	Good Condition
Photo	See Photo
Swing over bed: 330 mm dia, Swing over crosslide: 210 mm dia, X axis travel:180 mm, Z axis travel: 1016 mm, Spindle bore: 42 mm dia, Spindle motor: 7.5 KW, Spindle speeds to 3500 mm RPM, With offline alphalink CAD/CAM software - allows machine to operate in full " auto moe" dickson quick change toolpost and holders, 3 & 4 Jaw chuck, Interlocking guards. machine lighting, Coolant, Operation manuals, Control: Fanuc CNC

761

ID	MA31599
Make	Gildemeister,Germany
Model	CTX310V3
YOM
Condition	Good Condition
Photo	See Photo
Max swing over bed : : 500 mm Swing over cross slide : 375 mm (14.75 in) Bar capacity : 50.8 mm (2 in) Clamping chuck diameter : 170/210 mm (6.69/8.2 in) Clamping chuck diameter back Spindle: 165 mm (6.49 in) Transverse stroke: 202 mm (7.9 in) Longitudinal stroke : 450 mm (17.7 in) Y-axis stroke : +/-40 mm (1.57 in) Feed drive Rapid traverse X/Z axes : 24/30 m/min (787/1181 ipm) Rapid traverse Z2/Y axis: 30/10 m/min 1181/394 ipm Headstock (left/right) Spindle nose (plain flange): 140 h5/145h5 mm Inside diameter front bearing : 100/90 mm 3.93/3.54 in Spindle bore diameter : 69/44 mm 2.69/1.73 in Main drive Rating AC main drive (100% ED): 16 kW 21.4 HP Torque (100% ED): 153 Nm 114 lb.ft. Speed range : 20 - 6000 rpm Back spindle AC drive power (100% ED): 7.5 kW 10 HP Torque (100% ED): 48 Nm 35.3 lb.ft. Speed range: 20 - 6000 rpm Tool turret Number of tool stations 12 Tool reception according to DIN 69880 (VDI 3425) cylinder shaft diameter 30 mm 1.181 in Indexing time 30� 0, 2 sec. Tool turret Heidenhain controls Number of driven tools 12 Drive power (40% ED) 9 KW 12 HP Torque (40%) 20 Nm 14.8 ft lb Max speed. 4500 min-1 C-axes, main spindle / backspindle Speed range 0 - 200 min-1 Accuracy at point stopping < 0, 04 degrees Electrical connection Installed power, max ca. 24 kVA Voltage 400 V Frequency 50 Hz Net weight of the machine with chip conveyor approx. 4500 kg 9920 lbs. Dimensions Machine with chip conveyor LxBxH ca. 4000 x 1563 x 1730 mm ca. 157 x 61.5 x 68.11 inch Equipped with � Heidenhain Plus iT CNC Control � 8"Chk, � Tailstocks, � C-Axis, Live Tools � Comes with Chip Conveyor � 6 live tooling holders (axil and Radial), transformer and Manuals

762

ID	MA31593
Make	Miyano
Model	BNE 51SY
YOM	2000
Condition	Good Condition
Photo	See Photo
MIYANO CNC Turning Centre with 7 axes With live tooling, sub-spindle and twin turrets Control:FANUC 18i-T With C axis Upper turret travel X1xZ1xY1: 150x380x40mm Lower turret travel X2xZ2: 115x125mm B-axis travel:450mm Max. work length: 90mm Main motor: 15/20hp Max. spindle speed:4000rpm Bar capacity:51mm Machine size-H:2090mmx2855x2070mm Weight:7200kg Complete with FMB magazine bar loader Complete with good tooling package

763

ID	MA31547
Make	Dugard
Model	FNL320SY
YOM	2014
Condition	Good Condition
Photo	See Photo
Driven tools, C axis, Y-axis, tool eye

764

ID	MI7010
Make	PARISHUDH
Model	TC 250 CNC
YOM	2007
Condition	Good Condition
Photo	See Photo
FURTHER DETAILS ATTACHED IN PHOTO

765

ID	MI7006
Make	Victor
Model	TN-02
YOM	1985
Condition	Good Condition
Photo	See Photo
TN-02 FURTHER DETAILS ATTACHED IN PHOTO

766

ID	MI7005
Make	Victor
Model	TNS-03
YOM
Condition	Good Condition
Photo	See Photo
Model-TNS-03 FURTHER DETAILS ATTACHED

767

ID	MA31311
Make	Schaublin,Swiss
Model	110
YOM
Condition
Photo	See Photo
Centres height - 110mm Center distance - 300mm Swing over crosslide - 115mm Spindle hole - 32mm

768

ID	MA31310
Make	Schaublin,Swiss
Model	130
YOM
Condition	Good Condition
Photo	See Photo
Diameter over the longitudinal bed - 500mm Workpiece's diameter depending on tools - 160.220mm Workpiece's length - 340mm

769

ID	MA31136
Make	Weiler
Model	DZ42
YOM	1991
Condition	Good Condition
Photo	See Photo
Siemns 880 T control � Coolant device max. 4 bar � Coolant supply by counterspindle � Belt-type chip conveyor � Oil mist centrifugal separator HMB AS 108 � Gravity band filter � 2x 16-fold tool turret VDI 20 � various accessories Technical Details: Turning-� 310mm Support path X / Z axis 240/665 mm Support path U / W axis 240/558 mm Travel counter spindle 558 mm main spindle Clamping device � 160 mm Spindle head DIN 55026 A5 Spindle bore 53 mm Bar passage 42 mm Drive power 18.5 KW Speed range 50 - 5000 1 / min C-axis counter spindle Clamping device � 110 mm Spindle head DIN � 80 H6 Drive power 5 KW Speed range 50 - 5000 1 / min C-axis Weight Maschine 5900 kg Space requirement machine (3200x2250x2150) mm Space required Gravity belt filter (2400x1100x900) mm

770

ID	MA31035
Make	Hitachi
Model
YOM	1995
Condition	Good Condition
Photo	See Photo
MAKE: HITACHI SEIKI CNC TURNING CELL MODEL: TF20 with MR-6 robot loader Control: Seicos L III, Swing over the bed: 400mm, Chuck diameter: 210mm, Maximum turning diameter: 350mm, Maximum turning length: 250mm, Spindle Speed: 30-4500 rpm, Spindle nose: A2-6, Spindle though hole diameter: 59mm, Turret: 10 station, X-Axis: 180mm, Z-Axis: 320mm, MR-6 Loader with Stocker and Stacker Weight: 3900 kg,

771

ID	MA31020
Make	Traub
Model
YOM	2002
Condition	Good Condition
Photo	See Photo
Loaded to truck Visible in production Video on demand 36mm bar passage, with option 42mm for billets LG 4M20 Bar loader 4 axes Some collets included Tour numerique TRAUB TNK 36 Annee 2002 Passage 36 mm en pince et 42mm en mors Chargeur automatique barres lg 4m20 4 axes Outillage : quelques pinces de serrage Model : TNK 36, 4 axes (2002)

772

ID	MA31001
Make	Doosan
Model
YOM	2014
Condition	Good Condition
Photo	See Photo
MAKE: DOOSAN CNC Lathe MODEL: PUMA 480XL (2014) 600mm chuck, 3m between centres, Fanuc 32iA CONTROLLER: Fanuc 32iA FANUC 32iA CONTROL 600mm Chuck 160mm bore 2 axis control 60hp motor 1500rpm 630mm turning diameter 900mm max swing 3000mm turning length Tailstock

773

ID	MA30816
Make
Model
YOM	1990
Condition
Photo	See Photo
20.8 inch swing over bed (500 mm) 333.3 inch center distance (8000 mm) CNC � russian. 4 gear ranges, 4 - 600 RPM spindle speeds Chuck � 630 mm Bison. 6-way electric turret , 1.6 inch tool capacity rear chain type chip conveyors Steady rest - 2pcs Hydraulic tailstock Leveling blocks MACHINE Length - 14000 mm Weight � 32000kg 64000lbs. designed for panzer or cannon barrel The RT711 CNC lathe is great for oil field and millitary applications.

774

ID	MI6908
Make	Takisawa,Japan
Model
YOM
Condition	can be inspected under power
Photo	See Photo
Fanuc ot.control. 12 station turret. Between center 2 meters. Chuck size. 700mm. Spindle bore 180mm

775

ID	MI6907
Make	Hankook
Model
YOM	2002
Condition
Photo	See Photo
MODEL: PRO TURN 100. Swing over bed: 1000MM Swing over slide: 800mm Length: 2000MM FANUC: 18-T. twin turret tool holder with conveyer and steady rest.

776

ID	MA30667
Make	Feeler,Taiwan
Model	FTC10
YOM	2011
Condition
Photo	See Photo
8 atation, 6 chuck, Without tailsock, spindle speed- 6000 rpm

777

ID	MA30610
Make	Boehringer,Germany
Model
YOM	1991
Condition
Photo	See Photo
BOEHRINGER VDF 400 C-U - control SINUMERIK 880 T, Circular diameter over bed slide 750 mm Circular diameter over plan slide 700 mm Tip width 2,000 mm Main spindle: Spindle head adapter Gr. 15, DIN 55026 Max. Speed 1800 min-1 Transmission stages 3 Power 53 kW Turret: Tool holder VDI 60, DIN 69880 Number of tool positions 12 Number of driven tool positions 6 C-axis Tailstock: Pinol diameter 130 mm Quill stroke 120 mm Headrest SK 40 Chip conveyor Power Chucks Div. tool holders

778

ID	MA30587
Make	Cincinnati Machines
Model
YOM	1997
Condition	Excellent
Photo	See Photo
1 unit. CNC LATHE CINCINNATI FALCON 250 CNC LATHE. IN VERY NICE CONDITION Year of manuf. 1997 Max. Turning Dia. 254 mm Max/. Turning Length 500mm Max. Dia. through Spindle 65mm Spindle Speeds to 3500 RPM Spindle Drive Motor 15KW 12 Station VDI Turret + All Tool holders Tailstock with Programmable Quill Movement. Machine Worklight. Siemens Acramatic A2100 CNC Controls 1 unit: CNC LATHE CINCINNATI FALCON 200 CNC IN VERY NICE CONDITION Year of manuf. 1997 Max. Machining Dia 250 mm Max. Cutting Length 420 mm 52mm Dia Bar Capacity Spindle Speeds to 4500 RPM 12 Station VDI 40 Turret/ Tailstock 11KW Spindle Motor 200mm Dia Power Chuck Crawford CDC64 Collet Chuck VDI 40 Toolholders Siemens Acramatic A2100 CNC Controls

779

ID	MA30540
Make	Galaxy
Model
YOM
Condition	Good Condition
Photo	See Photo
Galaxy 8 inch chuck, Fanux Oi control

780

ID	MI6857
Make	Micron
Model
YOM	1998
Condition	Very good condition
Photo	See Photo
ASKAR MICRON SPINNER 10 Chuck Dia : 200 MM ABC : 380 MM Control : Siemens 810 D

781

ID	MI6856
Make	Micron
Model
YOM	1997
Condition
Photo	See Photo
Askar Micron Spinnar 20 Chuck 250 mm Swing max 480 mm Siemens 810 D Chip Conveyor Stabilizer Manual

782

ID	MI6855
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
TATUNG TAIWAN MODEL : TL-15S Chuck : 250mm Travels : X 400mm, Z 500mm ABC : 550mm Tail Stock : 8 Station Turret With Chip Conveyor Controller : Fanuc OTC

783

ID	MI6854
Make	Yang
Model
YOM
Condition
Photo	See Photo
ML-28A Chuck : 250mm Travel : X-Axis 415mm, Z-Axis 530mm ABC : 600mm Turret 8 Station RPM 3000 Controller : FANUC OTC With Tail Stock, Coolant Tank, Motor, Chip Conveyor,

784

ID	MI6851
Make
Model
YOM
Condition
Photo	See Photo
TATUNG TAIWAN MODEL : TL-15S Chuck : 250mm Travels : X 400mm, Z 500mm ABC : 550mm Tail Stock : 8 Station Turret With Chip Conveyor Controller : Fanuc OTC

785

ID	MI6850
Make	Yang
Model
YOM
Condition
Photo	See Photo
Chuck : 250mm Travel : X-Axis 415mm, Z-Axis 530mm ABC : 600mm Turret 8 Station RPM 3000 Controller : FANUC OTC Model: ML-28A

786

ID	MI6848
Make
Model
YOM	2007
Condition
Photo	See Photo
Ctx 310, CTX 310, Swing 450 Job 310 Chuk 200 Abc 500 Also has sub spindle Also has milling c axis and y axis Fanuc 32i latest seires

787

ID	MI6847
Make	Campro
Model
YOM
Condition	Good Condition
Photo	See Photo
CNC turning Chuck 18" Turning length 1100 mm Fanuc oi td Yr of manu 2011-09 Spindle hole 100 mm With study & chip conveyor

788

ID	MI6846
Make	Kirloskar Warner Swassey
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck dia,375 3 jaws & 4 jaws. 1500 ABC Fanuc 11 T control All AC Motors

789

ID	MI6828
Make	Feeler,Taiwan
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck dia: 200 mm, Cutting length: 350 mm, Control: Fanuc OTC 12 station turret

790

ID	MI6827
Make	Tongil,Korea
Model	TNL45
YOM
Condition	Good Condition
Photo	See Photo
Chuck: 200 mm, Admit: 800 mm, 12 stations turret, Fanuc OT

791

ID	MI6821
Make	Nakamura Tome,Japan
Model	TMC20
YOM	1998
Condition	Good Condition
Photo	See Photo
Chuck diameter: 200 mm, Turret hydraulic vdi type 10 stations Controller Fanuc

792

ID	MI6810
Make	Leadwell,Taiwan
Model	LTC30BP
YOM
Condition	Good Condition
Photo	See Photo
500 maximum dia 1100 between centre

793

ID	MI6802
Make	Trub German
Model
YOM
Condition	Good Condition
Photo	See Photo
ABC 850 mm, Chuck dia: 200 mm, Hust control

794

ID	MI6794
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
Servo motor: 2 nos Servo amplifier: 2 nos Controller card : 1 nos CRT : 1 nos Control: Fanuc 15 TT

795

ID	MA30423
Make	Hankook
Model	Dynaturn15
YOM
Condition	Good Condition
Photo	See Photo
1500 x 5000 mm, Control: Fanuc 15M

796

ID	MA30392
Make	Colchester
Model	CNC2000
YOM	2009
Condition	Good Condition
Photo	See Photo
Turning cap: 426 x 1250 mm, Spindle hole diam: 54 mm, Rev.Turret for 8 stations, Cnc Fanuc Oi-T Weight of machine 2,36 Kg

797

ID	MI6759
Make	Gedee Weiler
Model
YOM	2007-08
Condition	Good Condition
Photo	See Photo
Chuck diameter: 135 mm, Controller delta digital controller Retrofitting with new controller in 2017

798

ID	MI6753
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
1) Make: Stanko Model: PC3 Swing over bed: 1000 mm, On carriage: 800 mm, Tailstock Steady rest, ABC 5 mtr With coolant arnagement Control: Fanuc Oi Mate TD 2) Make: Skoda Chuck dia: 1200 mm, Swing over bed: 1000 mm, Swing over on carriage approx: 800 mm approx, Admit between center (ABC): 4000 mm approx, overhaul bed length: 5500 mm, Four jaw chuck Steady rest Geared head stock Tail stock with manual movement Box guide ways Square tool post 4 station Control: Fanuc Oi Mate TD

799

ID	MI6746
Make	-
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia-900, Bed-4m, Center Hight-450mm, Between Center-3m, Controller-Mitsubishi.

800

ID	MI6740
Make	W/S
Model
YOM
Condition	Good Condition
Photo	See Photo
Between Center-2m, Controller- Semins.

801

ID	MI6734
Make	Pride Banglore
Model
YOM	2012
Condition	Good Condition
Photo	See Photo
165 Chuck, Fanuc oi mate td Die 200 Length maybe 350 With Servo

802

ID	MI6729
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
200 Check semans control with tail stock and stabiliser

803

ID	MI6728
Make
Model
YOM
Condition	Good Condition
Photo	See Photo
200 Check Fanuc td control with tailstock

804

ID	MA30328
Make	Tsugami,Japan
Model	MA5-10P
YOM	1995
Condition	Good Condition
Photo	See Photo
Dimension pallets : 450 x 450 mm, X axes : 560 mm, Y axes : 350 mm, Z axes : 580 mm, N� tolls : 126, N� palletts : 11, Cnc : Fanuc 11M.

805

ID	MI6725
Make	Cholchester
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
1 mtr Turning length: 1135 mm Turning Dia : 200 mm Control Fanuc OT

806

ID	MI6724
Make	Cholchester
Model
YOM	1994
Condition	Good Condition
Photo	See Photo
2 MTR Turning Dia: 370 Swing:500 mm 2100 plus between center

807

ID	MA30307
Make	Miyano
Model	BNJ42SY
YOM	2010
Condition	Good Condition
Photo	See Photo
FANUC 18i-TB control. 12 Station main turret by servo indexing motor that can be tooled up to 48 tools including power tools. 6 Station sub turret with power tools driven by servo indexing motor . Left spindle for first operation work. Right spindle for secondary operation work. 67 to 5,000 RPM left and right spindle speed. 15 Horsepower Fanuc AC left spindle drive motor. 7.5 Horsepower Fanuc AC right spindle drive motor. 0.2 Second/station turret indexing (main turret). 0.2 Second/station turret indexing (sub turret). Bi-directional turret indexing on both main and sub turrets. Y-Axis on main turret. Left & right spindle synchronous control. Overlapping control for simultaneous machining. C-axis left & right spindle control. Rigid tap function for both spindles. Revolving tool attachment on main turret. 3.3 Horsepower revolving tool drive unit. 4-Axis simultaneous machining. First and secondary operation can be performed simultaneously. Free position indexing of each cutting tool. Left & right spindle orientation for hexagon and square bar work part transfer. Exclusive left and right spindle combination tool holders reduce turret indexing. Inner high pressure (160 psi) coolant/air for right spindle. IEMCA Kid 70 magazine bar loader serial number 020638OA03. Chip conveyor. Full set of live tools and tooling and collets as shown. Full set of documentation. One owner from new. Machine maintained by Citizen service engineers and in perfect working order.

808

ID	MA30306
Make	Nakamura Tome,Japan
Model	TW20
YOM	1988
Condition	Very good condition,Under power
Photo	See Photo
2 x spindles, 2 x 12 posts turrets, Bar dia: 51 mm 1 x C axis, 3 x live tools Nakamura Tome (Fanuc OT) controller Interface for bar feeder

809

ID	MA30281
Make	Gildemeister,Germany
Model	CTX420 Linear
YOM	2003
Condition	Good Condition
Photo	See Photo
Heidenhain Turn Plus With C and Y axis Rotating length 600 mm Rpm, max 5000 25 kW spindle Collet chuck and about 10 pcs. Machine has new head spindle

810

ID	MI6711
Make	PMT
Model
YOM	2005
Condition
Photo	See Photo
165 mm Chuck 300 length PMT SUPERCUT 6, Fanuc oi Tc control

811

ID	MI6710
Make	Pinacho
Model
YOM	2007
Condition
Photo	See Photo
2 meter flat , 10" chuck Fanuc oi Tc control , Smart 220, 2000 mm length, Hydraulic chuck Hydraulic Tailstock 4way square Turret 200 maximum running dia

812

ID	MA30266
Make	Wohlenberg
Model	M1000
YOM	Reconditioned in 2006
Condition	Good Condition
Photo	See Photo
Swing over Bed: 1000 mm Centre Height: 500 mm Swing Over Cross Slide: 630 mm Faceplate Dia.: 900 mm Width Of Bed: 670 mm Centre Distance: 8000 mm Main Motor Power: 60 Kw Main Spindle Bore: 165 mm Work Piece Weights:- * With 1 Steady: 5 tons * With 2 Steady: 6.3 Tons * With 3 Steady: 8 Tons Speeds Of Main Spindle: 0.355 � 710 retro-fit with Siemens 802 D Control (the machine was an NC machine before)

813

ID	MI6702
Make	Miyano
Model
YOM	2005
Condition	Good Condition
Photo	See Photo
Chuck dia: 165 mm, Fanuc 21 T

814

ID	MI6700
Make	Hardinge
Model	Conquest-T42
YOM
Condition	Good Condition
Photo	See Photo
Chuck size : 165/200, With live tools, Complete set of collets, Fanuc : 18T.

815

ID	MA30223
Make	Colchester
Model	CNC2000
YOM	2009
Condition	Good Condition
Photo	See Photo
Max. swing diam. over bed: 400 mm Max. turning diam. over carriage: 246 mm Distance between centres: 1250 mm Spindle bore diam.: 54 mm Spindel speed range: up to 6�2750 Rpm Carriage traverse: 210 mm Feed range: 0,0001 - 40,0000 mm/rpm Feed rate: 1 - 5000 mm/min Rapid travel range: 6 m/min Revolve Turret head for: 8 positions of tools Tailstock : MK 5 Tailstock traverse : 155 mm Power of maindrive motor: 7,5 kW 14. Weight of machine: 2300 kg 15. Dimensions (l x w x h): 2740 x 1500 x 1860 mm Accessories: Service Manual Books Hydraulic chuck 3 jaws Coolant unit with pump Turret 8 tools Control: CNC Fanuc O-T

816

ID	MA30218
Make	Mazak,Japan
Model	Integrex60 x 2000U
YOM	1991
Condition	Good Condition
Photo	See Photo
MAZATROL T32-3 21� chuck ATC30 w/ Tail stock and Chip conveyor

817

ID	MA30186
Make	Mori Seiki
Model	SL20
YOM	1991
Condition	Good Condition
Photo	See Photo
Max Dia : 210 mm, Max Turning length : 520 mm, Max Swing : 450 mm Dia, Control : T5F-Moric (FANUC-15TF).

818

ID	MA30157
Make	Binns and Berry Craven
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
1000mm x 3000mm. Swarf conveyor. 12 station tool changer. 1000mm swing. 3 point steady. Tailstock. 3 & 4 jaw chucks. Sauter turret. Fanuc 21it control.

819

ID	MA30156
Make	Binns and Berry Craven
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
1000 mm x 6000 mm. Fanuc 21it control. Sauter turret. Driven tools and C axis (Milling). Steadies.

820

ID	MA30146
Make	Haas
Model	HL2
YOM
Condition	Good Condition
Photo	See Photo
Travels (X/Z) : 8.45� x 20�, Swing Over Apron : 20�, Swing Over Cross Slide : 9.5�, Distance Between Centers : 24�, Rapid Traverse All Axes : 710 IPM, Spindle Nose : A2-6, Spindle Bore : 3�, Draw Tube Bore : 2.6�, Spindle Speeds : 3750 RPM, Spindle Motor : 15/20 HP, Turret Capacity : 10 Stations, Dimensions : 98� x 70� x 70�, Weight : 9,000 lbs. Parts Catcher. Chip Conveyor. Collet Nose, As Shown In Photo. No Tooling Included.

821

ID	MI6657
Make	Mori
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck : 380 mm, Swing : 600 mm, BC : 1000 mm, Max turning : 500 mm, Control : New Mitsubishi M 70.

822

ID	MA30094
Make	Mazak,Japan
Model	Slant Turn 80N x 3000
YOM
Condition	Good Condition
Photo	See Photo
80N x 3000 mm

823

ID	MA30049
Make	Tuscan
Model	LC38
YOM	2007
Condition	Good Condition
Photo	See Photo
Swing over bed : 970 mm, Swing over cross slide : 600 mm, Centre Height : 490 mm, Width of carriage : 885 mm, Centre distance : 4300 mm, Bed Way : 3-v way with 1 flat way, Spindle bore : 153 mm, Spindle Speeds : 4 � 1800 RPM, Spindle Power : 30/37 Kw, Complete With:- Turret: H4-250 VDI hydraulic quick change. Lubrication Pump : 25 W. Coolant pump : 1/2 HP high presure. Front & Rear Chip conveyor. Full Enclosed Guarding. Steadies up to 600 mm Dia. 150 mm boring bar attachment that takes 1500 mm boring bar. Control: Fanuc OiTD with colour screen.

824

ID	MA30036
Make	Hass
Model	ST-30
YOM	New 2015
Condition	Good Condition
Photo	See Photo
Swing Over Front Apron : 31.75" Swing Over Cross Slide : 20.75" Maximum Cutting Diameter : 21.0" Maximum Cutting Length : 26.0" Travels X-Axis : 12.5" Y-Axis : 26.0" Rapid Traverse Rate � Both Axes : 945" / Min. Spindle Speeds : 3400 RPM Spindle Nose : A2-6 Spindle motor : 30 HP 3/60 Equipped With: Haas CNC Control w/ 15" Color LCD Monitor and USB Port 10" Hydraulic Chuck 12-Position Turret Tail stock Rigid Tapping Work Gauging Probe Expanded Memory Cooler Unit for Electronics

825

ID	MA29888
Make	Gildemeister,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
lap Index G300 1995 with its feeder + 2 doors rotating tool chuck + 1 + 1 + documentation door clamp manufacturer - 1 round Gildemeister Sprint 65 years in 1997 with its feeder Door + 1 + 1 pliers + chuck manufacturer documentation. Siemens cabinet 840C. disconnected (Since June 2016), sprinting 65 at the door Access electrically locked work area and therefore can not be opened before power is restored.

826

ID	MA29800
Make	Tornos
Model	M7
YOM	1989-1993
Condition	Good Condition
Photo	See Photo
There are more, than 30 such lathes available for sale Number of turning tool holders - 5 Turning diameter - 7 mm Spindle speed - 10000 rpm Dimensions - 1500 x 600 x 1500mm Weight - 800 kg

827

ID	MA29793
Make	Traub
Model	TNM42
YOM	1996
Condition	Good Condition
Photo	See Photo
Bar feed max : 3200 mm, Hours of operation : 43682, Accessories : canal � 11.5 � 14 mm, Basic holder on tool slide, Pick up spindle mounted on turret. control TX 8 F.

828

ID	MA29790
Make	AMUTIO EMAG
Model	VL3
YOM	2014
Condition	Good Condition
Photo	See Photo
No. of axis: 3 Rapid traverse in X/Y/Z: 60/-/30 m/min Swing diameter over bed cover: 210 mm Working diameter, max.: 130 mm Working length, max.: 110 mm Clamping chuck diameter, main spindle: 165 mm Power, main spindle at 100/40% usage: 16/25 kW Revolutions, main spindle: 7500 1/min Torque, main spindle at 100/40% usage: 85/134 Nm No. of tools per turret: 12 Tool reception in turret: VDI 40 Power requirement: 28 kW Dimensions (L x W x H): 3600x1900x2300 mm Weight: 5500 kg

829

ID	MA29732
Make	Mazak,Japan
Model	Quickturn8
YOM
Condition	Good Condition
Photo	See Photo
Mazatrol Cam T2 Control Turret, Tooleye and Tailstock

830

ID	MA29708
Make	Hardinge
Model	CHNC1
YOM
Condition	Good Condition
Photo	See Photo
Fanuc OT control, 16 c collet spindle The machine is not under power, but was running good the last time in use.

831

ID	MA29705
Make	Monarch,USA
Model
YOM
Condition	Good Condition
Photo	See Photo
Fanuc 11 t control

832

ID	MA29699
Make	Nardini
Model	Fast Trace VS
YOM
Condition	Good Condition
Photo	See Photo
Fanuc 20 control, With chuck, With tailstock, The machine is not under power, but was running good the last time in use.

833

ID	MA29696
Make	Storm
Model	--
YOM	1996
Condition	Good Condition
Photo	See Photo
Fanuc OTC control Turret,Chuck and tailstock The machine is not under power, but was running good the last time in use.

834

ID	MA29653
Make	WFL Voest Alpine
Model	Millturn M100
YOM	1997
Condition	Good Condition
Photo	See Photo
Turning Length: 3000 mm. Max swing: 930 mm. Max turning diameter: 850 mm. Spindle speed: 1600 rpm. Max. milling speed: 6000 rpm. Coolant through spindle: 80 bar. B-axis: -110/+90 grader. Y-axis: 600(-200/+400) mm. Tailstock diameter: 180 mm. ATC Capto C8: 36 tools. Spindle effect: 63 kW. Milling effect: 25 kW. 1 Hydraulic SMW support diam 50 � 310 mm. 1 Hydraulic SMW support diam 160 � 460 mm. Control: Sinumerik 840C.

835

ID	MA29613
Make	Mazak,Japan
Model	Integrex100-IISY
YOM	2003
Condition	Good Condition
Photo	See Photo
First axis: 6#hallow 6000 rpm, 0.001� index ・C Axis Control, Second axis: 6#hallow 6000 rpm, 0.001� index・C Axis Control, Workable Range: φ470�727 mm, Revolution tool: 10000 rpm ( Spindle Through Coolant attached）, B axis Control（0.001�), Y axis attached , ATC40 tools (CAPTO), gantry Attached (FLEX-GL75F), Bar feeder attached　ASQ-51model(Alps tools ), Part catcher, Tool Eye, Chip Conveyor, Control：Mazatrol Fusion 640MT

836

ID	MA29609
Make	Mori Seiki
Model	SL65a
YOM
Condition	Good Condition
Photo	See Photo
Maximum swing over bed: 35.0" Maximum swing over cross slide: 22.0" Distance between centers: 35.4" Max turning diameter: 32.3" Bar work capacity: 3.5" X axis travel: 17.1" Z axis travel: 33.9" Spindle speeds:93-280 RPM (1st range), 220-660 RPM (2nd range) 600-1800 RPM (3rd range) Spindle nose: A1-11 Through spindle hole: 4.1" Spindle bearing inner diameter: 6.7" Number of tool stations: 12 Turret indexing time: 1.5 sec/1 station Rapid traverse (X): 196.9 IPM, Rapid traverse (Z): 315 IPM, Tail stock travel: 26.8" Tail stock spindle diameter: 4.3"Taper hole of tailstock spindle: MT4 Tail stock quill travel: 3.9" Equipped with Moric T6F (fanuc 16 T) CNC control (1) 16" 4-Jaw independent manual chuck, (1) 12" 3 -Jaw hydraulic chuck (solid, no thru hole), 50 HP/40 HP main drice, Chip conveyor, Assorted tooling, Approximate overall dimensions: 4826 x 2032 x 2489 mm, Approximate weight: 9070 Kg.

837

ID	MI6518
Make	Mori Seiki
Model	TL40/3000
YOM	1990
Condition	Good Condition
Photo	See Photo
Maximum swing over bed: 610 mm, Swing over cross slide: 375 mm, Max. turning diameter: 375.5 mm, Max. machining length: 2875 mm, Distance between centers: 3050 mm, Spindle bore: 82.5 mm, Chuck size: 300 mm, Spindle nose: A2-8 Spindle speeds: 12-2500 RPM, Turret configuration: 8 station, X axis travel: 231.25 mm, Z axis travel: 2900 mm, Main motor: 30 HP, Equipped with: Brand new mitsubishi E70 CNC control 12" hydraulic chuck Tailstock Chip conveyor, Totally new electrials and drives.

838

ID	MA29551
Make	Okuma,Japan
Model	LB15II-MY
YOM	1995
Condition	Good Condition
Photo	See Photo
Milling attached /Push cup attached, Bet center: 500 mm, Chuck: 10 inch, Bite 12 claws holder, Control: OSP-7000

839

ID	MA29548
Make	Niles-Simmons
Model
YOM	2003
Condition	Good Condition
Photo	See Photo
Max. turning diam. over bed : 635 mm, Max. turning diam. over saddle : 400 mm, Long. travel : 370/3.400 mm, Max. turning length : 3.000 mm, Max. work load without steadies : 1.800 kg, Max. work load (flying) : 250 kg, Spindle bore : 112 mm, Driven tools (DIN 69880) 12, Turret VDI : 50, Stepless rpm : 10 � 3.000 UpM, Feeds : 0,1 � 12.000 mm/Min., Rapid traverse : 24/12 m/Min., Feeds : 16/10 kN, Spindle drive : 37/46 kW, Tailstock - sleeve diameter : 135 mm, Stroke of sleeve : 150 mm, Overall size : 4.530 x 2.700 x 2.600 mm, Weight : 12 to. CNC-control SIEMENS � SINUMERIK 840 D. 12 driven tools (max. 2.320 rpm.). Chip conveyor. Tailstock MK 5. Coolant. 12-fold turret VDI 50.

840

ID	MA29546
Make	Tsugami,Japan
Model	SS20M
YOM	2013
Condition	Good Condition
Photo	See Photo
Max. working diameter: 20 mm, Main spindle speed: 200-10000 rpm, Back spindle speed: 200-12000 rpm, Tooling speed: 300-30000 rpm, ATC: 24, COntrol: Fanuc 32iB

841

ID	MA29531
Make	Cincinnati,USA
Model	Falcon200
YOM	1995
Condition	Good Condition
Photo	See Photo
Max Swing Over Bed: 521.5 mm, Max Swing Over Carriage:246 mm, Max Tail stock Position: 437.5 mm, Max Machinable Center Distance: 413.25 mm, Standard Chuck Size:206.25 mm, Cross Travel (X-Axis): 211.25 mm, Longitudinal Travel (Z-Axis): 413.25 mm, Feed Range (Infinitely Variable): 01-630 IPM, Number of Turrets:1 Tool Positions: 12 Total Spindle Bore:50 mm Spindle Nose: A2-6 Spindle Speed Range (1 RPM Increments):40-4500 RPM Spindle Horsepower:15 HP Approximate Machine Dimensions: 2745 x 1375 mm Approximate Machine Heigh 1925 mm, Approximate Machine Weight: 6,600 LBS, Control: Siemens Acramatic 2100

842

ID	MA29383
Make	Mazak,Japan
Model	Slant-40N.ATC-MC
YOM	1987
Condition	Good working condition
Photo	See Photo
Chuck size : 380 mm, Swing over bed : 540 mm, X axis travel : 550 mm, Z axis travel : 1602 mm, C axis (milling axis) : Yes, Spindle speed : 4-2200 rpm, Tool storage capacity : 32 pcs, ATC : Yes, Max cutting diameter : 335 mm, Max cutting length : 1510 mm, Spindle though hole dia.: 80 mm, Power supply : 200 V x 3 phase, Control system : Mazatrol cam T-3, Number of axis : 4.

843

ID	MA29324
Make	Mori Seiki
Model	15SL
YOM	1988
Condition	Good Condition
Photo	See Photo
Max. turning diameter: 160 mm, Max. turning length: 525 mm, Max bar diameter: 41 mm, Max spindle speed: 6000 rpm, Driven tools

844

ID	MA29295
Make	Hass
Model	TL-15
YOM	2004
Condition	Good working condition
Photo	See Photo
Turning diameter : 208 mm, Turning length : 445 mm, Weight : 4.3 t.

845

ID	MA29293
Make	Gildemeister,Germany
Model	CTX500E Serie2
YOM	2003
Condition	Very good condition
Photo	See Photo
Max. swing over bed: 680 mm, Max. swing over slide: 455 mm, Cross travel: 320 mm, Lenght travel: 1.097 mm, Spindle speed: 18-3.600 rpm, Spindle hole: 107 mm, Number of tooling stations: 12, Machine weight: 8,7 ton, Control: Heidenhain CNC

846

ID	MA29289
Make	Gildemeister,Germany
Model	NEF400
YOM	2005
Condition	Good Condition
Photo	See Photo
Max. turning diameter : 350 mm, Max. turning length : 650 mm, Max. turning diameter form rod : 63 mm, Spindle junction : ASA6, Spindle speed range : 4000 Rpm, Turret positions : 8, Main motor power : 12 kW, CNC : FANUC 210iS-T.

847

ID	MA29273
Make	Mori Seiki
Model	SL35MC
YOM
Condition	Good Condition
Photo	See Photo
MF-T4. Between Centers : 750, Turret : 12 tools, Chuck : 15 inch, Chip conveyor.

848

ID	MA29252
Make	Pinacho
Model	ST285x1500
YOM	2014
Condition	Good Condition
Photo	See Photo
Swing over bed: 570 mm, Distance between centers: 1500 mm, Main drive: 11 kW, Spindle speed: 0-2500 rpm, Spindle bore: 80 mm, Tailstock MT5, Equipment/Accessories Control Fanuc Oi mate -TD; Turret 8 places, electronic hand wheels for X and Z axis central lubrication system, coolant equipment, mchine lamp, 3 jaw chuck diam 250 mm, chip conveyor

849

ID	MA29234
Make	Nakamura Tome,Japan
Model	TW8
YOM	1997
Condition	excellent working condition
Photo	See Photo
Collet chuck, (ASP-40), REV : 60-6000, Main spindle sub-spindles : 12 corners, Bar : 3 m (oil feeder), 2 level, Chip conveyor (the right⇒ back stock), Mist collector, FANUC-21iTB.

850

ID	MA29231
Make	Mazak,Japan
Model	Integrex30y
YOM	1998
Condition	Good Condition
Photo	See Photo
Mazatrol T Plus, ATC 40, 10 inch 3 claw chuck, Distance between : 1380, Tail Stock, Tool Pre-set, Conveyor.

851

ID	MA29230
Make	Nakamura Tome,Japan
Model	WT150
YOM	2008
Condition	Good Condition
Photo	See Photo
Collet Spindle (SAD-50), 12 Tools turret (compound) Y axis /Sub-spindle : 6, INCH 3 Claws Chueck, Lower : 12 corner turret, (compound) With a tool, Gantry, Tools Pre-set, Gantry loader, Chip Conveyor, Work stocker : 10 st, Work out going conv, Auto Bar 4m. FANUC-18iTB.

852

ID	MA29218
Make	Graziano
Model	SAG241500
YOM	1988 Retrofit 2002
Condition	Good Condition
Photo	See Photo
Chuck size : 500 mm (AUTOBLOC), Between centres : 3000 mm, Swing over cross slide : 670 mm, Swing in gap : 1070 mm, 500 mm autobloc power chuck, 2 autoomatic turrets, front and rear, 2 x steady (350 mm + 650 mm), Swarf conveyor, Vee bed. 160 mm spindle bore. Control : Fanuc 0T-C.

853

ID	MA29200
Make	Romi
Model	M680
YOM	2001
Condition	Good Condition
Photo	See Photo
Chuck Size: 460mm (18") Dual chuck - one on each end of headstock Control: FANUC 21i-T Distance between centres: 3000mm Spindle bore: 160mm Turret positions: 8 Spindle motor power: 22/30kW Swing: 680mm Swing over the cross-slide: 430mm Coolant, low volt light 4 point open roller steady 3 point closed roller steady Additional Equipment: Turret takes up to 20 & 100m boring bars, 2 x steadies

854

ID	MA29134
Make	Colchester
Model	Combi
YOM	2000
Condition	Good Condition
Photo	See Photo
Distance between center 2000 mm with Fanuc control Turning lenght 2000 mm Turning � over bed 400 mm Turning � over sledge 240 mm spindle speed 25-2500 rpm Spindle hole 54 mm Rapid feed x, z 8/10 m/min Drive capacity 11kW Weight ca. 3300 kg

855

ID	MA29133
Make	Takisawa,Japan
Model	TX1
YOM
Condition	Good Condition
Photo	See Photo
Diameter : 210 mm x Distance between center 400 mm, X axis : 125 mm, Z axis : 420 mm, Instep feed revolver, Head surface : 450 mm, Spindle head : A1-6 ASA, Spindle drilling :- Diameter : 52 mm, Spindle cone : MK6, Machine bed width : 430 mm, CNC Control : Astro Fanuc. Digital broad control unity.

856

ID	MA29132
Make	Gildemeister,Germany
Model	CTX400
YOM
Condition	Good Condition
Photo	See Photo
12-fold disc revolver (of it 6 tools drived), Top height : 500 mm, Plan way : 212 mm, L�ngsweg : 640 mm, 1 Sp�neausf�rderer, Weight : 5,14 to. Control. Cnc Gildemeister

857

ID	MA29131
Make	Gildemeister,Germany
Model	NEF-CT40
YOM
Condition	Good Condition
Photo	See Photo
Max turning diameter : 225 mm, Max. rotary length : 600 mm, Revolver head with 12-fold Tool holder VDI-30, Weight : 4. 5 to.

858

ID	MA29130
Make	Gildemeister,Germany
Model	NEF-CT40
YOM
Condition	Good Condition
Photo	See Photo
Max turning diameter : 225 mm, Max. rotary length : 600 mm, Revolver head with 12-fold Tool holder VDI-30, Spindle rotations : 5000 / P.min. Grip on main spindle : fi-200 mm, Chill system, Chip convoyer, Hydr. tailstock, Weight : 4. 5 ton. Control : Moor grove pilot CNC EPLII.

859

ID	MA29129
Make	Miyano
Model	BND34S3
YOM	1996
Condition	Good Condition
Photo	See Photo
1 turret head, Coolant system, 2 spindles, Weight : 4 tons. Fanuc Series 18-T.

860

ID	MA29128
Make	Monfort,Germany
Model	MMC5
YOM	1989
Condition	Good Condition
Photo	See Photo
With tool turret with : 12 tool stations, Max. Turning length : 1100 mm, With a CNC Screen Control Monforts Control system F, 1x chip conveyor, 1 x separate control / cabinet Fanuc, Incl. documentation.

861

ID	MA29122
Make	Tornos Bechler
Model	ENC264
YOM
Condition	Good Condition
Photo	See Photo
Capacity : 26 mm, Length : 300 mm, Mid : 90's vintage, Live tools FANUC. Machines Equipped : With indexing, Sub Spindle, Live Tools, 4m bar loaders.

862

ID	MA29116
Make	Nakamura
Model	TW20
YOM
Condition	Good Condition
Photo	See Photo
Maximum turning diameter: 270 mm, Distance between centers: 1080 mm, 5000 rpm, Main spindle bar capacity: 51 mm, Turret1:12 3600 rpm, Turret2:12 3600 rpm Control: Fanuc 18

863

ID	MA29071
Make	H. Ernault Somua
Model	HES600
YOM	1983
Condition	Good Condition
Photo	See Photo
Maximum length : 1600 Max Diameter: 600 Turret: 12 tools NUM 1060

864

ID	MA29057
Make	Schaublin,Swiss
Model	150
YOM
Condition	Good Condition
Photo	See Photo
Centers height: 150 mm, Center distance: 630 mm, Swing over bed: 340 mm, Spindle speed: 55.3000 rpm, Dimensions: 1715 x 970 x 1280 mm, Weight: 1250 kg.

865

ID	MA29049
Make	Citizen
Model	M20
YOM	1996
Condition	Good Condition
Photo	See Photo
3 position live drilling ststaion 5 position forming tool station 6 station turret with 6 static or live tool positions Quantity of various collets FMB magazine bar loader

866

ID	MA29048
Make	Citizen
Model	A20
YOM	2007
Condition	Good Condition
Photo	See Photo
Max. turning dia: 20 mm, Max. turning length: 165 mm, Max. drilling dia for main spindle: 10 mm, Max. tapping dia for main spindle: M8, Spindle motor: 2.2/3.7 Kw, Spindle speed: 8000 rpm, Controller: Fanuc 32i TA, With Fedek M20 bar feeder(3M), Cutting tool holder: 7 pcs, Rotary tool holder: 3 pcs, Drilling tool holder: 4 pcs (front and rear share)

867

ID	MA29047
Make	Citizen
Model	K16 type VI
YOM	2007
Condition	Good Condition
Photo	See Photo
5 turning / forming tools 4 rotary tools 4 position front drilling tool station 4 position rear drilling tool station Fire suppressant system Parts conveyor IEMCA Genius 118 magazine bar loader

868

ID	MA29043
Make	Citizen
Model	M20
YOM	1995
Condition	Good Condition
Photo	See Photo
Max turning dia: 20 mm, Max turning length: 320 mm per chuck, Spindle speed: 8,100 rpm, Control: Cincom system, With Pro HP 326 barfeeder

869

ID	MA29042
Make	Citizen
Model	L20VII
YOM	2000
Condition	Excellent
Photo	See Photo
4 Position live drilling station: 4 live tools, 5 Position linear forming tool station: no tools, 3 Position front drilling station: 1 static tool holder, 3 Position rear drilling station: 1 static tool holder, Control: Cincom

870

ID	MA29041
Make	Citizen
Model	L16
YOM	1997
Condition	Good Condition
Photo	See Photo
Max. machining dia: 15.75 mm, Max. machining length: 196.75 mm, Max. drilling dia: 7.75 mm, Spindle speed: 10,000 rpm, Rotary spindle speed: 5,000 rpm, With barfeeder, Control: Cincom

871

ID	MA29037
Make	Gildemeister,Germany
Model	CTX400
YOM	1996
Condition	Good Condition
Photo	See Photo
Max. work piece diameter : 420 mm, Max. oiece diameter on the bed : 570 mm, Max. work piece length : 635 mm, C axes, Bar capacity : 79 mm, Spindle speed range : 25-5000 Rpm, Feed speed : 4000 mm/min, Rapid speed X-Z : 20 - 24 mt/min, Movement: X axes : 212 mm. - Z axes : 640 mm, Main motor power : kW 21, Turret positions : 12, Dimension : 3800 x 1750 x H 1750, Machine weight : 5800 Kg. Ca. Cnc: Heidenhain PILOT.

872

ID	MA28994
Make	Okuma,Japan
Model	2SP-35HG
YOM	2007 / 2000
Condition	Good Condition
Photo	See Photo
1) OKUMA 2SP-35HG (2007). 2SP/L8 in 3 claw Chuck +R8in Claw Chuck, Cutter dice : V12+V12, Max Dia : φ380, Max length : 230, 2000 rpm, Gantry Loader. Fanuc-18iT. 2) OKUMA 2SP-35HG (2000). 2SP/ L8 in 3 claw Chuck +R8in Claw Chuck, Cutter dice : V12+V12, Max Dia : φ380, max Length : 230, 2000 rpm, Gantry Loader.

873

ID	MA28933
Make	Mazak,Japan
Model	QT25C
YOM	1998
Condition	Good Condition
Photo	See Photo
Chuck Size : 200 mm Hydraulic Chuck, Maximum Swing : 433 mm, Swing Over Bed : 250 mm, Maximum Bar Work : 69 mm, X Axis Travel : 177.25 mm, Z Axis Travel : 503.125 mm, Spindle Nose / Spindle Bore : A2-200 / 78.75 mm, Spindle Speeds : 36 ~ 3,600 RPM, Spindle Motor : 25 HP, Turret Type : 8 Position Turret, Rapid Traverse X,Z : 1181 IPM, Machine Dimensions : 2450 x 1525 mm, Machine Weight : 11,000 lbs. Equiped with :- 200 mm 3 Jaw Hydraulic Chuck, Complete Coolant System, RS-232C Port for DNC Interface, Chip Conveyor. Qty : 2 nos

874

ID	MA28909
Make	Citizen
Model	M16III
YOM	2001/2002
Condition	Good Condition
Photo	See Photo
Main spindle Main spindle speed:10,000 rpm, Max. machining dia: 16 mm, Max. turning length W/O re chucking: 200 mm, Through hole dia: 20 mm, Sub spindle Sub spindle speed:10,000 rpm, Max. machining dia: 16 mm, Control: CINCOM system. 2 machines.

875

ID	MA28861
Make	Okuma,Japan
Model	LB2500EX
YOM	2010
Condition	Good Condition
Photo	See Photo
OSP-P20L, 8 Inch Chuck, 12 tools Turret, Center, Chip Conveyor, 45-5000 rpm.

876

ID	MA28859
Make	Murata
Model	MW30
YOM	1990
Condition	Good Condition
Photo	See Photo
2 Spindle, F-0TT, Dia : 540, 12 inch chuck � 2 .10 tools �2　 35～3500 rpm, 15Kw, X-250 Z-265　 chip conveyor.

877

ID	MA28858
Make	Mori Seiki
Model	TL40B
YOM	1989
Condition	Good Condition
Photo	See Photo
F-10T, Dia : 620�2115, 12 inch Hydralic Chuck 25～2500 rpm, Auto lock.

878

ID	MA28857
Make	Mori Seiki
Model	SL45B
YOM	1991
Condition	Good Condition
Photo	See Photo
MF-T4（F-0TC), Dia : 670�1180,　 Dia : 490　 Cross dia : 460, 12 tools, X-270 Z-1600, Chip conveyor.

879

ID	MA28856
Make	Nakamura Tome,Japan
Model	TMC200
YOM	1992
Condition	Good Condition
Photo	See Photo
F-16 T, Max. work: dia 300 x 350 mm, Kitagawa N-8 chuck, 42~5000 rpm, Mill:30~3600 rpm, 12P turret, Chip conveyor

880

ID	MA28854
Make	Mori Seiki
Model	SL35
YOM	1994
Condition	Good Condition
Photo	See Photo
Moric-T7Y, 12 inch Chuck, 10 tool turret, Cross 425,9～2500rpm, Chip Conveyor.

881

ID	MA28853
Make	Okuma,Japan
Model	LB25
YOM	1991
Condition	Good Condition
Photo	See Photo
OSP5020L, 10 inch chuck, 12 tools turret, Chip conveyor.

882

ID	MA28852
Make	Okuma,Japan
Model	LB250T
YOM	2006
Condition	Good Condition
Photo	See Photo
OSP-E106, 8 Inch Chuck, 12 tools Turret, Center, Chip Conveyor.

883

ID	MA28851
Make	Okuma,Japan
Model	LB2500EX
YOM	2008
Condition	Good Condition
Photo	See Photo
OSP-P20L,　 8 Inch Chuck, 12 tools Turret, Center, Chip Conveyer.

884

ID	MA28850
Make	Okuma,Japan
Model	LB35II
YOM	1997
Condition	Good Condition
Photo	See Photo
OSP7000L, 8 Inch Chuck, 12 tools Turret, Center, Chip Conveyer.

885

ID	MA28849
Make	Okuma,Japan
Model	LB9
YOM	1992
Condition	Good Condition
Photo	See Photo
OSP500L-G,　 6 Inch Chuck, 8 tools Turret, Center.

886

ID	MA28848
Make	Mori Seiki
Model	CL-153
YOM	1999
Condition	Good Condition
Photo	See Photo
MSG-803(MELDAS), 6 inch chuck,　 12 tools Turret, Center, Chip Conveyer.

887

ID	MA28802
Make	Cincom
Model	L10
YOM	2000
Condition	Good working condition
Photo	See Photo
Spindle speed : 300~12000 rpm, Tool storage capacity : 12 pcs, ATC : Yes, Max cutting diameter : 10 mm, Max cutting length : 85 mm, Spindle though hole dia.: 11 mm, Bar feeder, Max drilling capacity : 6 mm, Max tapping and die cutting capacity : M6, Spindle drive motor : 1.5/2.2 kW, Number of axis : 2, Chuck size : Collet mm, Dimension (L x W x H) : 4.8 x 1.2 x 1.5 m, Machine weight : 1.5 ton. Control system: Fanuc 16 - T.

888

ID	MA28691
Make	Mori Seiki
Model	SL35B5
YOM	1990
Condition	Good Condition
Photo	See Photo
Chuck size : 370 mm, Number of axis : 2, X axis travel : 238 mm, Z axis travel : 780 mm, Spindle speed : 25~2500 rpm, Tool storage capacity : 10 pcs, ATC : Yes, Spindle drive motor : 18.5/22 kW, Machine weight : 7 ton, Dimension (LxWxH) : 3.7 x 1.9 x 2.4 m, Control system : Fanuc 15TF.

889

ID	MA28444
Make	Giana
Model	GF920CNC
YOM	1998
Condition	Good Condition
Photo	See Photo
Swing over bed guideways : 1050 mm, Swing over cross slide : 920 mm, Distance between centres : 1500 mm, Spindle nose : ISO702/I 15" A1, Spindle bore : 155 mm, Variation of r.p.m. in different ranges : �1000(10�1600) rpm, Turning tools : N� 1�12, Spindle motor power : 40�60 Kw, Max workpiece weight between centres : 3000 Kg, Weight of the machine : 21440 kg. CNC Siemenc 840 d.

890

ID	MA28213
Make	Chevalier,Taiwan
Model	FCL-2580-G
YOM	2009
Condition	Good Condition
Photo	See Photo
Max swing over bed : 660 mm, Max swing over saddle : 400 mm, Center distance : 2000 mm, rpm : 2250 spindle bore : 85 mm, 8-fold turret, steady, 3-jaw chuckr : 400 mm, toolholders, control : Siemens 840 D.

891

ID	MA28076
Make	VDF Boehringer
Model	180 C
YOM	1992
Condition	Good Condition
Photo	See Photo
Swing over bed : 330 mm, Distance between centers : 1000 m,m Spindle speed range : 50 - 4500 r / min, Revolver : 12 - fold, Weight of the machine ca .: 8, 5 to, Control : CNC Siemens 810T, Equipment / Accessories: Tailstock; Chip conveyor; 12-station turret; Coolant system.

892

ID	MA28073
Make	Hwacheon
Model	Hi-Tech-400
YOM	2011
Condition	Good Condition
Photo	See Photo
X - axis displacement of 280 mm, Z - axis : 820 mm, distance between centers : 1000 mm, turning diam. 340 mm above the bed, spindle bore : 80 mm, spindle speed : 2500 rpm, rapid traverse X - axis 20 m / min, z- axis 20 m / min, v.v. 12 -fold tool holder, SMW 3-jaw chuck diam. 300 mm , foot control , Controller : Fanuc, type 0i- TD, machine weight : 8050 kg, Only 996 Hours Worked.

893

ID	MA28072
Make	Heyligenstaedt
Model	Heynumat24L-2/2000
YOM	1987/1997 retrofitted
Condition	Good Condition
Photo	See Photo
Centre height : 450 mm, Distance between centre : 2000 mm, Swing over bed : 900 mm, Swing over slide : 800 mm, Spindle bore : 105 mm, Bed slide : 2 pcs. , Tool changer : 2 pcs./12 tools VDI60, Spindle speed : 9-2240 rpm (2 levels), Motor power : 79,5 kW, Weight: appr. 17, Controller : SIEMENS SINUMERIK 840C(1997).

894

ID	MA28063
Make	Jator
Model	TAJ85
YOM	1995
Condition	Good Condition
Photo	See Photo
Turning diameter over bed: 600 mm, Swing over carriage: 360 mm, Turning length max: 1000 mm, Bar passage: 85 mm, Spindle nose: DIN 55026 A8, Spindle speed: 0-2500 rpm, Spindle power : 22/26 kw, Chuck aut.idraulico: 315 mm, 12-position automatic turret type, Axes X/Y: 285-100 mm, Quick axes X/Z : min 20,000 mm, Spindle taper C.M.4 Manual machine, Control: CNC Fanuc 0-T

895

ID	MA28043
Make	Mazak,Japan
Model	Integrex35Y
YOM	New 1998
Condition	Good Condition
Photo	See Photo
Turning length : 1000 mm, Max swing : 575 mm, Swing over slide : 470 mm, Spindle bore : 88 mm, Spindle speeds : 35-3000 rpm, Z, X, C, Y-axis, MAZATROL T Plus control, hydr, Steady, tooling.

VKengg.co.in

Category : Turning Machines

Sub-Category : Lathe CNC