V. K. Engineering - Buying & Selling of Machines made easy

Category : Turning Machines

Sub-Category : Lathe Vertical Turning CNC

Total Machines Found : 386

Select

| Machine Details

ID	MA39596
Make	Schiess
Model	63 FZG
YOM	1993
Condition	Good Condition
Photo	See Photo
Gantry width - 6,500mm Height of gantry - 3,500mm Fixed table - 8,000 x 5,000mm Fixed table load - 25,000kg/m2 Turn table - Dia. 4,500mm Turn table load - 63 tons ATC - 110ea Attachments - 9 sets X-axis travel - 19,000mm Y-axis travel - 7,500mm Z-axis travel - 1,600mm W-axis travel - 2,500mm Ram size - 460 x 380mm Spindle motor - DC 114Kw Table motor - DC 71Kw Cutting force - 80KN Feed force - 45KN CNC system - SINUMERIK 850M

ID	MI11361
Make	Bertheiz
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck 1250 mm Swing 1400mm approx

ID	MA39414
Make	IMT Italy
Model	S50 TM2 W50/2
YOM	1999
Condition	Good Condition
Photo	See Photo
CNC FANUC 18i Plateau diameter 800 mm Turning diameter 1200 mm Turning height 330 + 650 mm Spindle range 1600 rpm Spindle drive 37 - 45 kW (S1/S6) Power 92 kW Weight 16000 kg Max. turning Ø 1280 mm X=941 mm, Z=650 mm Chip conveyors Full covered - RAM motor 7-11 kW (S1/S6) Hydraulic self centering chuck (ASA 15") C axis and live tools 24 seats ATC (HSK-100)

ID	MI11289
Make	Okuma
Model	2SP-V40
YOM
Condition	Good Condition
Photo	See Photo
Dia: 400 mm Max. length: 450 mm, Max. Swing: 500 mm Speed: 2,500 min-1 Turret: V12 Total tools: 2 x 12 =24 Motor: 2 x 22/18.5 kW X-axis travel: 10.43 in Z-axis travel: 17.72 in Spindle motor: 30 HP Weight: 30,800 pounds Rapid traverse (X/Z): 24 m/min

ID	MA39204
Make	S&T
Model	TVL160
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck 2000mm Max swing : 2048mm ATC: 4 stations Control: Fanuc Oi-TC

ID	MA39183
Make	TOS
Model	SKJ10
YOM
Condition	Good Condition
Photo	See Photo
CNC Pronum Turning diameter 1000 mm Max turning diameter 1150 mm Max height 900 mm Weight 12.000 kg numerically controlled

ID	MA39166
Make	S&T
Model	TVL160
YOM	2008
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Dia.1600mm Swing over Dia 2080mm Z travel 900mm High low gear Control - Fanuc

ID	MA39160
Make	Bullard,UK
Model
YOM
Condition	Good Condition
Photo	See Photo
Cnc VTL BULLARD Chuck dia mm.900 Swing mm.1200 Heigh mm.450 Automatic turret

ID	MI11225
Make	Tongil,Korea
Model	TNL-120V
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia: 1000mm Swing Dia: 1250mm Height: 872mm Vertical ram travel: 650 mm Controller: Fanuc OiTF Plus (2025) Max Load.: 4T Chuck Speed (2 ranges): 1 – 400 RPM Weight : 13,500 Kgs

ID	MA39147
Make	BERTHIEZ
Model
YOM	1982
Condition	Good Condition
Photo	See Photo
Table 5000 Swing 8000 Height 4000 It is NC control machine.

ID	MA39145
Make	Russian
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck - 4500 mm Swing - 5000 mm Height - 3000 mm Table load capacity - 80 Tons Control - Siemens

ID	MA39144
Make	Stanko-Russia
Model	1540T
YOM	Retrofitted In 2010
Condition	Good Condition
Photo	See Photo
PLATFORM DIAMETER 400O MM MAXIMUM TURNING HEIGHT 2500 MM MAXIMUM TURNING DIAMETER 4000 MM PERMITTED WEIGHT 100 TON MAXIMUM VERTICAL DISPLACEMENT OF THE CROSSBEAM 1600 MM CARRIAGE DISPLACEMENT ANGLE -15/ + 40 ° PLATFORM ROTATION 0.46 - 42.5 RPM CROSSBEAM SCREW FEED RANGE 240 CARRIAGE RAPID FEED 3125 RPM MAIN MOTOR POWER 60 KW CNC FAGOR 8070 NR 02 TURNING CARRIAGES OVERALL DIMENSIONS 6100 X 10400 H 8400 MM WEIGHT 134 TON

ID	MA39143
Make	HNK
Model	NT-45/50
YOM	2007
Condition	Good Condition
Photo	See Photo
System :F-18i-TB ATC : NO Table :4,500mm Swing :5,000mm

ID	MA39142
Make	Doosan Daewoo
Model	PUMA V-1200M
YOM	2002
Condition	Good Condition
Photo	See Photo
CNC VERTICAL LATHE FANUC SERIES 18-T MACHINE WEIGHT -23.000 Kg MACHINE DIMENSIONS Length 6.350 mm Width 4.500 mm Height 5.450 mm Max load capacity on the chuck - 6.000 Kg Max swing diameter -1.600 mm Max turning dimeter -Ø1.600 mm Max turning height -1200 mm Spindle Chuck dimater -1200 mm Spindle speed range 2+320 rpm Spindle speed steps -2 Steps Motor power (cont./30 min.) -37/45 kW Cone size -ISO-50 Live-tool speed -15/1500 rpm RAM section - 240 x 240 mm Live-tool Spindle [RAM] Travels X axis (Horizontal RAM) -1200 mm Z axis (Vertical RAM) -900 mm C Axis (Chuck rotation) -360° (Min. Angle 0,001") Feed rates X/Zaxes rapid feed -10.000 mm/min X/Z axes cutting feed -3.000 mm/min Turret Turret stations -16 positions Tool type - BT-50 Pull-stud type -403 P50T-1 Max tool diameter -400 mm Max tool length -450 mm Max tool weight - 50 kg Max tools weight capacity of magazine -600 Kg *Accessories and Other Chip conveyor Coolant tank with pumps Chiller for spindel head Various live tool / fix holders Manuals, Electrical diagrams and EC CE Decleration

ID	MA39044
Make	S&T
Model	ST25/35V
YOM	2012
Condition	Good Condition
Photo	See Photo
Table diameter : 2500mm Table Load : 25,000kg Max cutting diameter : 3500mm Max cutting height : 2050mm Table speed : 130rpm Ram size : 240mm x 240mm Main motor : 45/55kw 12 position turret Chip conveyor Fanuc 31iA control

ID	MA39011
Make	EMAG
Model	VSC400
YOM
Condition	Good Condition
Photo	See Photo
3 axis workpiece diam. 340 mm workpiece max length 180 mm chuck diam max 400 mm cnc siemens

ID	MI11155
Make	Mori Seiki
Model	VL25
YOM	2000
Condition	Good Condition
Photo	See Photo
Control - Mori Seiki MSC-518 Swing - 600 mm Max. Turning Dia - 450 mm Diameter Turnable Standard - 355 mm X/Z Travel - 255/470 mm Spindle Speed - 30-3000 RPM Spindle Nose - A2-8 Spindle Bore - 61 mm Spindle Power - 18.5 kw Approx Weight - 7500 kg Overall Dimensions - Length - 1854 mm Width - 3200 mm Height - 2443 mm

ID	MA38980
Make	IMT Italy
Model	S50 TM2 W50/2
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CNC FANUC 18i Plateau diameter 800 mm Turning diameter 1200 mm Turning height 330 + 650 mm Spindle range 1600 rpm Spindle drive 37 - 45 kW (S1/S6) Power 92 kW Weight 16000 kg Max. turning Ø 1280 mm, X=941 mm, Z=650 mm Chip conveyors Full covered RAM motor 7-11 kW (S1/S6) Hydraulic self centering chuck (ASA 15") C axis and live tools - 24 seats ATC (HSK-100)

ID	MA38942
Make	DORRIES
Model	CTE 320/3400
YOM	1981
Condition	Good Condition
Photo	See Photo
faceplate diameter : 3200 mm swing diameter : 5100 mm turning height : 2505 mm cross rail - adjustment : 1500 mm max. ram stroke : 1250 mm slide adjustment : 2000 mm control : Siemens 8 T tool changer : 16 STK table load : 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 1-1000 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m

ID	MA38929
Make	Romanian
Model
YOM
Condition	Good Condition
Photo	See Photo
Size :2.3 Meter Processing height 1.5m, load bearing 20 tons! Double tool holder Siemens system!

ID	MA38905
Make	Schiess Froriep
Model	DZ 12-350/400-300/180
YOM
Condition	Good Condition
Photo	See Photo
Table diameter 3.500 mm Turning Diameter (max.) 4.000 mm Work piece height (max) 3.000 mm Machine height above floor level 7.250 mm Max. Workpiece weight 50.000 kg Auxiliares Devices: • Operator Lifting Platform • Chip conveyor • Coolant Unit • Tool Changer • Work piece probe RENISHAW prepared • Tool probe RENISHAW

ID	MA38904
Make	Schiess Froriep
Model	40 DZ 12-400/500-500/180
YOM
Condition	Good Condition
Photo	See Photo
Table diameter 4.000 mm Turning Diameter (max.) 5.000 mm Work piece height (max.) 5.000 mm Machine height above floor level 9.250 mm Max. Workpiece weight 80.000 kg Auxiliares Devices: • Operator Lifting Platform • Chip conveyor • Coolant Unit • Tool Changer • Work piece probe RENISHAW prepared • Tool probe RENISHAW

ID	MA38885
Make	BERTHIEZ
Model
YOM
Condition	Good Condition
Photo	See Photo
2.3 meters with a processing height of 2.2 meters! Siemens system!

ID	MA38870
Make	OM
Model
YOM
Condition	Good Condition
Photo	See Photo
Table 3000 with extension 5000 Swing 7000 Height 3400 Fanuc OiMD

ID	MA38833
Make	OM
Model	TMSI36-70
YOM	1994
Condition	Good Condition
Photo	See Photo \| See Video
TABLE DIAMETER 3600 MM MAXIMUM TURNING DIAMETER 7001 MM MAXIMUM TURNING HEIGHT 2900 MM MAXIMUN HEIGHT UNDER RAIL 3000 MM TABLE WEIGHT CAPACITY 45359 KG. VERTICAL RAM TRAVEL, Z-AXIS 1500 MM HORIZONTAL TRAVEL OF RAM, X-AXIS 2549 MM TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 1245 MM/MIN RAPID TRAVERSE, CROSS RAIL 305 MM/MIN RAPID TRAVERSE, COLUMN 533 MM/MIN MAXIMUM TORQUE 58,000 LB/FT MACHINE FOOTPRINT 10414 MM X 6706 MM MACHINE HEIGHT 7772 MM MACHINE WEIGHT 72575 KG. EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 3600 MM T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 37 KW MAIN MOTOR

ID	MA38832
Make	Giddings & Lewis
Model	VTC-3000
YOM	1991
Condition	Good Condition
Photo	See Photo
4-AXIS CNC CONTROL 30-STATION AUTOMATIC TOOL CHANGER VERTICAL RAM SIDE HEAD FLOOD COOLANT SYSTEM CHIP CONVEYOR SPECIFICATIONS: TABLE DIAMETER 3048 MM MAXIMUM SWING 3658 MM MAXIMUM SWING WITH SIDE HEAD 3404 MM MAXIMUM HEIGHT UNDER CROSS RAIL 2134 MM CROSS RAIL VERTICAL TRAVEL 1524 MM TABLE SPEEDS 3-130 RPM NUMBER OF TABLE SPEEDS 2 RAIL ELEVATING RATE 762 MM/MIN RIGHT HAND RAM HEAD: VERTICAL TRAVEL OF RAM, Z-AXIS 1575 MM TRAVEL BELOW RAIL 1372 MM HORIZONTAL TRAVEL RIGHT OF CENTER 2032 MM HORIZONTAL TRAVEL LEFT OF CENTER 2007 MM RAPID TRAVERSE RATE 6350 MM/MIN POWER DRAW BAR RAM ANSI B5.5 #60 TAPER RIGHT HAND SIDE HEAD: VERTICAL TRAVEL ABOVE TABLE 1740 MM VERTICAL TRAVEL BELOW TABLE 173 MM HORIZONTAL RAM TRAVEL 813 MM RAPID TRAVERSE RATE 3810 MM/MIN TOOL CHANGER ANSI B5.50 #50 TAPER EQUIPPED WITH: GIDDINGS & LEWIS NUMERIPATH 8000-L CNC CONTROL 30-STATION AUTOMATIC TOOL CHANGER 15-STATION AUTOMATIC TOOL CHANGER, SIDE HEAD VERTICAL RAM & RIGHT HAND SIDE HEADS AUXILIARY HAND HELD PENDANT 76 MM DIAMETER BALL SCREWS AC SERVO DRIVES INDUCTOSYN FEEDBACK TOOL TIP PROBE (PROBE NOT INCLUDED) PROGRAMABLE RAIL HEIGHT TEMPERATURE CONTROLLED COOLANT SYSTEM PROGRAMABLE CHIP CONVEYOR WAY COVERS ON CROSS RAIL PEDESTAL PENDANT CONTROL HARDENED WAYS ON ALL AXES 3048 MM Giddings & Lewis VTC-3048 MM CNC Vertical Boring Mill 2-SPEED HELICAL GEAR TRANSMISSION FLOOD COOLANT SYSTEM WITH COOLANT PAN 112 KW 460 VOLT, 3-PHASE, 60 HERZ

ID	MA38831
Make	Youji,Taiwan
Model	GTH-35/45 ATC-I
YOM	2012
Condition	Good Condition
Photo	See Photo
The machine is under power for test running and inspection. Control Fanuc 0i-TD Faceplate diameter 3500 mm Weight on faceplate max. 50000 kg Swing diameter max. 4500 mm Turning diameter max. 4000 mm Turning height max. 2200 mm Travels X -1750 / +2160 mm Z 1500 mm Crossrail elevation max. 1400 mm Cutting feeds X, Z 1 ~ 2000 mm/min Rapids X, Z 6000 mm/min Table motor rating 60 / 75 KW Table speeds 2 ~ 75 rpm Torque at the table max. 67330 Nm Tool magazine and Automatic Tool Changer ATC Tool magazine positions 16 positions Tool taper 7/24 BT 60 Tools weight full ATC max. 1200 kg Tool change time max. 80 s Space requirement L x W 12375 x 8210 mm Height max. 7920 mm Weight 98000 kg Electrical power requirement 130 kVA Equipped with: 3 colour signal lamp Full guarding around the machine (top open) ATC guards Condition Excellent Power on hours 08.2022 6198 hours Run hours 08.2022 3011 hours Cutting time 08.2022 2899 hours

ID	MA38830
Make	Youji,Taiwan
Model	GTH-35/45 ATC-I
YOM	2012
Condition	Good Condition
Photo	See Photo
This machine has no C-Axis and no milling function. It is located in Asia and under power. Control Fanuc 0i-TD Faceplate diameter 3500 mm Weight on faceplate max. 50000 kg Swing diameter max. 4500 mm Turning diameter max. 4000 mm Turning height max. 2200 mm Travels X -1750 / +2160 mm Z 1500 mm Crossrail elevation max. 1400 mm Cutting feeds X, Z 1 ~ 2000 mm/min Rapids X, Z 6000 mm/min Table motor rating 60 / 75 KW Table speeds 2 ~ 75 rpm Torque at the table max. 67330 Nm Tool magazine and Automatic Tool Changer ATC Tool magazine positions 16 positions Tool taper 7/24 BT 60 Tools weight full ATC max. 1200 kg Tool change time max. 80 s Space requirement L x W 12375 x 8210 mm Height max. 7920 mm Weight 98000 kg Electrical power requirement 130 kVA Equipped with: 3 colour signal lamp Full guarding around the machine (top open) ATC guards Condition Excellent Power on hours 08.2022 6198 hours Run hours 08.2022 3011 hours Cutting time 08.2022 2899 hours

ID	MA38819
Make	Doosan
Model	VTS-1620M
YOM	2014
Condition	Good Condition
Photo	See Photo
Max. Swing 2000mm Max. Turning height 1556mm Ram stroke 956mm Spindle speed Max. 250 rpm Spindle motor AC 37/45Kw Milling spindle speed 3000 rpm Milling spindle motor AC 15/18.5kw C axis 0.001 deg. Fanuc 31i ATC 24 Turning tool holders BT. 50 milling tools 10 nos. Linear scale C axis

ID	MA38807
Make	FMUA ,Italy
Model	SC1250
YOM
Condition	Good Condition
Photo	See Photo
CNC ECS 1802 , PLATFORM DIAM 1120 MM MAXIMUM DIAMETER TO TURN 1250 MM MAXIMUM WEIGHT OF THE PIECE 2500 KG , MAXIMUM RAM STROKE 590 MM MAXIMUM TRAVEL OF THE CROSSBAR 760 MM VERTICAL CARRIAGE INCLINATION ANGLE +/- 45 ° 5-POSITION STAR-STOP TURRET

ID	MA38802
Make	Doosan
Model	Puma V550
YOM	2014
Condition	Good Condition
Photo	See Photo
Table Diameter - 24" Swing - 31.5" Turning Diameter - 28.74" Max Turning Length - 29.5" Chuck Size -24" X-Axis Travel -15.3" Z-Axis Travel -30.7" Control - Fanuc

ID	MA38801
Make	Doosan
Model	Puma V550
YOM	2011
Condition	Good Condition
Photo	See Photo
Table Diameter - 24" Swing - 31.5" Turning Diameter - 28.74" Max Turning Length - 29.5" Chuck Size - 24" X-Axis Travel - 15.3" Z-Axis Travel - 30.7" Control - Fanuc

ID	MA38800
Make	Homma
Model	TAC16
YOM	1998
Condition	Good Condition
Photo	See Photo
Table Dia.：1600mm Max swing：2000mm Max turning Dia.：2000mm Max turning height：1600mm Max. table load：10000kg FANUC 15T

ID	MA38797
Make	Toshiba
Model	TXN13
YOM	1992
Condition	Good Condition
Photo	See Photo \| See Video
Table - 1250 mm Swing - 1600 mm ATC - 24 (Milling Tool 16, Turning Tool 8) Control - Fanuc-15T

ID	MA38796
Make	IM Roman
Model	SC17
YOM	1992
Condition	Good Condition
Photo	See Photo
Faceplate diameter – 1.450 mm Max turning diamter -1.650 mm Max Job heigth -1.200 mm Table speed range -2 -200 rpm Working feed range – 0,1-400 mm/min Rapid traverse – 4000 mm/min Main motor – 55 kw Weigth -ab. 21 to

ID	MA38794
Make	Samu
Model	RS35-50
YOM	Retrofitted in 2012
Condition	Good Condition
Photo	See Photo
INTERNAL TABLE  4.270 MM. EXTENDED TABLE  5.500 MM. MAX. WORKING  WITH COLUMNS AHEAD 5.500 MM. MAX. WORKING  WITH COLUMNS BACK 7.000 MM. MAX. WORKING HEIGHT 1.800 MM. MAX. WEIGHT ON TABLE 20 TONS. COLUMNS TRAVEL 1.900 MM. CROSSRAIL TRAVEL 900 MM. TABLE MOTOR POWER 55 KW. 5.500 TABLE SPEEDS 2 ÷ 30 RPM. N. 2 CNC RAM TYPE VERTICAL TOOLS: VERTICAL TRAVEL 1.200 MM. TOOL-HOLDERS CAPTO C 8 TOTAL WEIGHT 48 TONS. CNC FAGOR 8070 RETROFITTED IN 2012 COMPLETE WITH: UPPER TABLE 5.500 MM.; WEIGHT 12 TONS.

ID	MA38792
Make	Schiess Froriep
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck 2000 mm Swing 3500 mm(2500) Height 2000 mm Fanuc control

ID	MA38790
Make	OM
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck size - 1200 mm Swing - 1500 mm Control - Fanuc-OT

ID	MA38778
Make	Schiess Froriep
Model	4 DE13-250/350
YOM	1989
Condition	Good Condition
Photo	See Photo
Table - 2500 mm Swing - 3500 mm Height - 2250 mm Control - Fanuc 0i-T Motor - DC110kw

ID	MI11066
Make	Webster & Bennet
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck Size - 3100MM Swing Dia - 3600MM Height - 1700MM Ram Travel- 1800MM Machine Control - New Fagor 8055I New Ball Screws Machine Weight - 60Ton Approx

ID	MA38776
Make	Stanko-sedin
Model	1525
YOM
Condition	Good Condition
Photo	See Photo
Diameter of Chuck - 2250 mm Maximum Turning Diameter - 2500 mm Maximum Turning Height - 1600 mm Maximum Workpiece Weight - 15000 kg Machine Weight - 30000 kg

ID	MA38774
Make	Sedin
Model	1512F3
YOM
Condition	Good Condition
Photo	See Photo
Specification: Swing: 1250 mm Table diameter: 1120 mm Max work-piece: -Height: 1000 mm -Weight: 6000 kg Horizontal stroke of tool slide: 775 mm Vertical stroke of tool slide: 700 mm Table speed range: 1.60 - 315 rpm Feeding range: 0.01 - 100 mm/rev Main motor power: 60 kW Dimensions: 4050x4590x5400 mm Weight: 17000 kg

ID	MI11064
Make	BERTHIEZ
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Max Swing OD - 3500 mm Chuck OD - 2200 mm Max Height - 2000 mm Controller - Make Fagor 8037 in 2019 (2 axis)

ID	MA38773
Make	Diedesheim
Model	Vertifront S-70
YOM	1994
Condition	Good Condition
Photo	See Photo
Tool swing diameter 1100 mm Vertical stroke Z-axis 630 mm Horizontal stroke X-axis 630 mm Control: Siemens 840 C

ID	MA38757
Make	Shibaura
Model	TD60/85
YOM
Condition	Good Condition
Photo	See Photo
Technical Specifications Table diameter 6000 mm Max. turning diameter 8500 mm Max. distance between table top and tool holder of rail heads 3500 mm Vertical travel of right ram 2300 mm Vertical travel of left ram 2000 mm Max. swivel angle of right and left ram ±30 deg Diameter of milling-spindle nose 290 mm Taper of milling spindle ISO 50 Max. load on table (less than 10 rpm) 160000 kg Section of right ram 320×320 mm Section of left ram 450×450 mm Milling spindle speed (on 3 steps) 6.3-630 rpm Table speed (on 3 steps) 0.315-31.5 rpm Table milling speed 0.0006-0.2 rpm Feed speed of rail heads 0.2-800 mm/min Rapid speed of rail heads 2400 mm/min Cross rail elevating speed 300 mm/min Weight of machine 225000 kg

ID	MA38750
Make	Samu
Model	RST-32
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
CHUCK DIAMETER3000 mm MAX TURNING DIAM3300 mm MAX LOAD CAPACITY30 ton NR OF RAM2 RAM TRAVEL1200 mm RAM SECTION250x250 mm MAX HEIGHT UNDER CROSS RAIL2300 mm CROSS RAIL VERTICAL TRAVEL2000 mm SPINDLE MOTOR POWER60 kw SPINDLE SPEED ROTATION1,02-130 RPM GEAR NUMBERS3 NR 2 ATC12 position each one CNCSIEMENS 840 D OVERALL DIMENSIONS7000x6750x h8200 MACHINE WEIGHT60 ton

ID	MA38749
Make	OM
Model	TM2-30N
YOM	2005
Condition	Good Condition
Photo	See Photo
FANUC 18I-TB TABLE 3,000MM MAX. SWING 4,000MM MAX. T/H 2,400MM RAM STROKE 1,250MM CROSSRAIL 1,800MM (200 X 9 STEP) ATC 12T

ID	MI11047
Make	Webster & Bennet
Model	36
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Size : 915mm Swing : 1300mm

ID	MI11046
Make	WMW
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1050 mm Chuck 1250 mm Swing 1000 mm height Fanuc Oitc Control

ID	MI11045
Make	Pensotti,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
CNC :- FANUC OITF plus Warranty :- 1 year for system Hydraulic power chuck size : 1000 mm Swing : 1400 mm Height :- 1100 mm Spindle rpm : 260 rpm Spindle power :- 30 hp ATC :- 12 tools, through tool coolant Coolant system Accuracy :- 0.01 per/ mtr Automatic lubrication system

ID	MI11042
Make	OKK
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck - 700 mm Swing - 1000 mm 4 jaws dog chuck simple tool post and body cabinet. Control LNC Taiwan new ball screw and LM CNC Retrofitted in 2024

ID	MA38707
Make	Youji,Taiwan
Model	YV-1200ATC
YOM	2012
Condition	Good Condition
Photo	See Photo
Worktable diameter: 1250mm Rotating diameter: 1600mm ‌machining diameter: 1350mm machining height: 1200mm ‌machining weight: 5000kg ‌XZ axis travel: 935900mm Beam vertical travel: 700mm ‌Spindle speed: 108-350rpm ‌spindle torsion: 8200nm ‌Fast feed rate: 12m/min machining feed rate: 2000mm/min ‌Manual feed rate: 10m/min ‌Spindle motor power: 37kW/45kW ‌Positioning accuracy: 0.005mm ‌Floor footage: 4000*4600mm

ID	MA38634
Make	Schiess
Model
YOM	retrofit in 2006
Condition	Good Condition
Photo	See Photo
Chuck dia: 6000 mm Max. turning dia: 6500 mm Max. swing dia: 6600 mm Max. turning height: 4000 mm Ram travel vertical: 2100 mm Ram travel horizontal: 3250 mm Workpiece weight: 80 Tonnes Machine weight: aprox 220 Tonnes Chip conveyor At present the machine is having only one side CNC, the other side on DRO basis

ID	MI10964
Make	Berthiez France
Model
YOM
Condition	Good Condition
Photo	See Photo
CHUCK DIA - 1600 MM SWING - 1880 MM HEIGHT - 1600 MM TRAVEL - 1200 MM SYSTEM - FANUC Oi TC

ID	MI10944
Make	Doosan
Model	v-420
YOM
Condition	Good Condition
Photo	See Photo \| See Video
supply voltage : 200/220v full load current : 82A Chuck Size :300mm

ID	MI10938
Make	Mario Carnaghi
Model	TG 20/2200
YOM	1994
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Diameter (face plate) Ø 1.750 mm Max. Turning Dia. Ø 2.200 mm Max. Turning Height 1.600 mm Z Axis Travel 1.200 mm Spindle Speed 150 Rpm Spindle Speed Steps (Gear Box) Nr. 4 Steps RAM Section 250 x 250 mm Rapid Feed-Rates axes X/Z 5.000 mm/min Tool Magazine Capacity 12 pos. CN CONTROL E.C.S. With new fanuc control

ID	MI10937
Make	Webster & Bennet
Model	72
YOM	2000
Condition	Good Condition
Photo	See Photo
Technical Specification: Table Dia.: 1850mm Max Swing: 2000mm Max Dia Under the Rail: 1600mm C Axis with Live Tools Tools Changer 12 4 Jaw Chuck Control: Siemens 840D

ID	MA38567
Make	MIBA
Model	MCRT-14
YOM	2017
Condition	Good Condition
Photo	See Photo
Diamètre max 13000mm Diamètre minimum 9000mm Course longitudinale X 1500mm Avance longitudinale rapide 5000mm/mn Course de la traverse sur le montant Z 4000mm Axes C 360 indéfiniment Vitesse de broche 3000tr-min Cônes de la broche HSK100C Dimension 13000x4500mm

ID	MA38552
Make	KOLOMNA
Model	1550
YOM	1978
Condition	Good Condition
Photo	See Photo
Diameter of workpieces 5000mm Height of workpieces 2500mm Weight of workpieces upto 63t Face plate diameter 4500mm Mass of the machine 140t It is NC control machine

ID	MA38549
Make	Umaro Romania
Model	SC27
YOM	Retrofitted in 1997
Condition	Good Condition
Photo	See Photo
CNC control ICEM / Italian Table dia 2500mm Max. swing 2650mm Turning height 1900mm Table load capacity-15tons 4 Axis RPM -1.24-112 Machine weight : 40tons

ID	MA38544
Make	Shibaura
Model	TD60/85S
YOM	1979-80
Condition	Good Condition
Photo	See Photo
Control - FAGOR 8055 CNC MAX. TURNING DIA. 8500mm MAX. TURNING HEIGHT 3500mm FACE PLATE DIA.: 6000 mm MAX. WEIGHT OF WORKPIECE: 160 to. FACE PLATE SPEED RANGE: 0,4-31,5RPM MAIN MOTOR POWER 100KW C AXIS AND MILLING MACHINE WEIGHT AB. 220TON The machine has one grinding and milling attachments. The machine had a general revision and CNC upgrade with FAGOR 8055 in 2010

ID	MI10870
Make	HNK
Model	NT 60/80
YOM	2015
Condition	Good Condition
Photo	See Photo
Table diameter 6,000 mm Swing 8,000 mm Turning height 5,000 mm Table capacity 120 Ton Table turn speed 40 rpm Z axis travel 2,500 mm X axis travel -200 ~ +4,300 mm Ram size 400 x 400 mm W axis travel 3,250 mm (250 mm x 13 Steps) Fanuc 31i-A CNC Control System 12 Position ATC Turning Tool Holders Linear Scales

ID	MA38495
Make	HNK
Model	NT25/30
YOM	2009
Condition	Good Condition
Photo	See Photo
- CNC Controller : Fanuc 18i-TB - Table size: ø2,500 - Max. Swing: ø 3,500 - Table to tool(high): 2,000 mm - Table speed: Max 100 rpm - Max Load: 15Ton - Table torque : 5075kg-m / 55kW / 10.6rpm Stroke - X axis : -200~+2,950 mm - Z axis : 1,200 mm - W axis : 1,000 mm - Feed rate X,Z axis : 1~ 3,000mm/min - Rapid feed rate X,Z axis : 10,000mm/min - Ram size : 240x240 mm - Tool shank : 40 x 40 mm - Machine size : 10,850 x 6,950 x 7,150 mm

ID	MA38493
Make	STANKO
Model	1563
YOM	BUILT/RETROFITTED IN 1989/2004
Condition	Good Condition
Photo	See Photo
TABLE  6.300 MM. MAX. WORKING  6.300 MM. MAX. WORKING HEIGHT 3.200 MM. MAX. WEIGHT ON TABLE 125 TONS. TABLE MOTOR POWER 160 KW. TABLE SPEEDS 0,28 ÷ 25,5 RPM. N. 1 CNC RAM TYPE VERTICAL TOOL: - VERTICAL TRAVEL 2.000 MM. - SWIVELLING ANGLE + 30°; - 15° TOTAL WEIGHT 223 TONS. OVERALL DIMENSIONS 8.200 x 14.000 x 8.300 H MM. CNC NUM 1060 Machine was completely retrofitted in 2004 with new ball screws, electric cabinet, motors (including table motor), wiring, hydraulic unit for hydrostatic table, new tracks under the table with special anti friction material, new cnc, toolholder, DRO for crossrail, spares. At present it is complete with n. 1 cnc ram type vertical tool, originally it had two. We have here the second ram type vertical tool and we are going to supply it for free together with the machine, but it is broken (one cast iron part, the one which joints the ram to the crossrail, is broken and must be rebuilt).

ID	MA38489
Make	Toshiba Shibaura
Model	TD50/60S
YOM	1973/ Retrofit in 2008
Condition	Good Condition
Photo	See Photo
2 Head type used CNC VTL CNC Controller Fanuc 0i-TD - Table size : ø5,500 - Max. Swing : ø 6,300 - Height from table to tool : 4,500 mm - Ram stroke : 2,100 mm - Max. cutting force of the right front cutting tool bar Delivery length at 400 : 6,000 kg Delivery length at 2,100 : 500 kg - Max. cutting force of the lift front cutting tool bar Delivery length at 400 : 4,000 kg Delivery length at 2,100 : 300 kg - Spindle motor : AC 90 Kw - Table speed : 0.32~32 rpm - Table cutting rotation force : 25,000 Kg-m - Table load capacity : 100,000 Kg - Machine height above the floor : 9,000 mm below the floor : 3,500 mm Machine floor space (L x W) : 16,000 x 10,600 mm - Machine weight : 165,000 Kg

ID	MA38484
Make	Titan Romania
Model	SC2000
YOM	1976
Condition	Good Condition
Photo	See Photo
Face plate diameter 2000 mm Max. turning diameter 2100 mm Stepless face plate speeds ( ) 1,55 . 140 rpm Max. height of workpiece 1500 mm Max. face plate load 12000 kg Max. vertical travel of vert. support 1200 mm Ram Stroke Left 1200 mm Ram Stroke Right 1200 mm Total motor power 75 kW Main Motor Power 55 KW CNC-control: Siemens 810 Various accessories. Jaws - Digital Length: 4200 mm, Height: 4600 mm, Width: 4300 mm, Weight: 31350 kg

ID	MI10821
Make	STANKO
Model	C3
YOM
Condition	Good Condition
Photo	See Photo
Control - Fanuc OiTF Plus 1 Year Warranty for System Chuck - 1150 mm Swing - 1300 mm Height - 1000 mm Spindle RPM - 160 RPM Spindle Power - 30 HP Accuracy - 0.01 per/MTR Coolant system provision Automatic Lubrication System

ID	MI10820
Make	WMW Niles ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Control - Fanuc OiTF PLus Chuck - 1450 mm Swing - 1600 mm Height - 900 mm Spindle servo motor Spindle RPM - 120 RPM Spindle Power - 30 HP Accuracy - 0.01 per/MTR Coolant system provision Automatic lubrication system

ID	MI10711
Make	TITAN
Model	SC33
YOM	1999
Condition	Good Condition
Photo	See Photo
Technical Specification: Controller: NUM Chuck Dia: 3000mm Swing Dia: 3300mm Height: 2800mm C Axis ATC: 12

ID	MI10664
Make	Doosan
Model	V550T
YOM
Condition	Good Condition
Photo	See Photo
* Maximum Swing: 31.50" * Maximum Cutting Diameter: 22.7" * Maximum Cutting Height: 24" * Spindle Speeds: 20-2000 RPM * Spindle Nose: A2-11 * Table Horse Power: 30 HP * Travel (Z-Axis): 24" * Travel (X-Axis): 12.2" * Rapid Traverse Rate: 472/472 IPM * Turret Configuration: 12 Station X 2 * Voltage: 440 Volts INCLUDES: Fanuc Series 18i-TB, 30HP Table Drive, 2000 RPM Spindle, A2-11 Spindle Nose, 21” Chucks on Both Machines

ID	MA38272
Make	Giddings & Lewis
Model	VTC1600
YOM	2005
Condition	Good Condition
Photo	See Photo
Specifications : Table Diameter - 1600 mm Max. Swing - 2000 mm Max. facing capacity - 2000 mm Max. height under ram face - 2165 mm Vertical ram travel - 1750 mm Left & Right X-Axis Ram Travel - +/- 1210 MM Ram Cross Section - 249 MM x 249 MM Rapid Traverse, X & Z Axes 787 IPM Feeds Rates X & Y Axes .004-787 IPM Feed Thrust X & Z Axes 34,000 Nm Table Speeds 1-400 RPM Table Speed Ranges 2 Table Constant Torque 25,000 Nm Floor Space 6985 MM x 4597 MM Overall Height 6706 MM Machine Weight 76,000 Lbs EQUIPPED WITH: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling Thru Ram Coolant Renishaw Part Probe System Renishaw Tool Probe System Linear Scales on X, Z & V Hand Held Pendant With E-Stop Steel Sliding Way Covers Full Chip and Splash Enclosure Chip Conveyor 100 HP Table Drive FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling Thru Ram Coolant Renishaw Part Probe System Renishaw Tool Probe System Linear Scales on X, Z & V Hand Held Pendant With E-Stop Control Options: Tool Offsets – 99 Tool Life Management Additional Tool Pair for Tool Life Management - 128 pairs Continuous Thread Cutting Variable Lead Thread Cutting Circular Thread Cutting Multiple Repetitive Cycles for Turning Chamfer and Corner R Program Restart Reader/Punch Interface RS232 Additional Reader/Punch Interface Remote Handy Operator Station Addition of a five (5) slot I/O Rack for customer use Includes one (1) 16-point Digital Input Card (AID16D) and one(1) 16-point relay output card (AOR16G)

ID	MA38215
Make	Hwacheon
Model	VT-1150MC
YOM	2009
Condition	Good Condition
Photo	See Photo
Fanuc 0i-TC Chuck dia. 40inch Max. Swing 1350mm Max. Turning dia. 1320mm Max. Turning height 950mm Table speed 630RPM Table motor 55 / 45Kw Turret 12 nos. Milling spindle 3000RPM Milling spindle motor7.5 / 5.5Kw Chip conveyor Hydraulic chuck

ID	MA38214
Make	Hwacheon
Model	VT-1150MC
YOM	2014
Condition	Good Condition
Photo	See Photo
Swing over bed 1350mm Max. Turning dia. 1,150mm Max. Turning height 950mm Chuck size 40" Spindle speed Max. 630 rpm AC 45/55kw 24 Tools Milling spindle speed 3000 rpm C-axis index 0.001 Fanuc 0i-TD

ID	MA38199
Make	Youji,Taiwan
Model	YV-600A
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Table:600mm， fanuc 0i-T Location:Taiwan Max. swing diameter Ø850 mm Max. turning diameter Ø750 mm Max. turning height 600 mm Max. work-piece weight 1800 KG Spindle speed 1500 rpm ATC:6T

ID	MI10533
Make	Cooper
Model	VT80
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia - 500 MM Control Fanuc

ID	MI10532
Make	TOS
Model	SKJ-8CNC
YOM
Condition	Good Condition
Photo	See Photo
Facing chuck dia.: 800 mm Swing dia: 1000 mm Working height: 500 mm Control: Fanuc OiTF Plus (2024) Tool change unit: 5 Max. table load: 2500 kg

ID	MA38142
Make	Homma
Model	TAC-16
YOM	1993
Condition	Good Condition
Photo	See Photo \| See Video
Table Dia.：1600mm Max swing：2000mm Max turning Dia.：2000mm Max turning height：1600mm Max. table load：10000kg FANUC 15T ATC：12T the tool holder included about 10 units.

ID	MA38141
Make	Hyundai
Model	SKT-V80R
YOM	2009
Condition	Good Condition
Photo	See Photo \| See Video
Max Turning Length: 31.5” Max Swing: 35.0” Rapid Traverse Speed: 787”/min X-axis Trave: 17.3” Z-axis Travel: 31.5” Spindle Speed: 5-2000 RPM INCLUDES: Fanuc 21itb Control 17.5" X Travel 35" Y Travel 12 Position Tool Changer 24" Power Chuck,

ID	MA38092
Make	BERTHIEZ
Model	TEM 1250N SP
YOM	1981
Condition	Good Condition
Photo	See Photo
NC MODEL : FANUC OT Max. Dia : D2,800mm Max. Height : 3,200mm Table Dia : D2,550mm Max Load : 25Tons Speed : 0.8-100RPM Max. Torgue : 50,000 N.m Drive Power : 55Kw

ID	MA38089
Make	Sedin
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table size 2820 mm Max. swing 3350 mm Max. turning height 1200 mm Max table speeds 34 rpm Vertical supports 2 pcs. Siemens Sinumerik 840 D Chip conveyor Standard jaws for clamping ( 2007 ) CNC fully Retrofitted

ID	MA38080
Make	Webster & Bennet
Model
YOM	1988
Condition	Good Condition
Photo	See Photo
Siemens 840Di Control Table 48” Max swing 60” Max height under elevating rail 40” Ram type machine with ATC, Swarf Conveyor, Full Surround Guarding, Coolant Pump Main motor 44KW

ID	MA38055
Make	Youji,Taiwan
Model	YV-600E
YOM
Condition	Good Condition
Photo	See Photo
Chuck - 600 mm Max. Swing - 837 mm Std. Cutting Dia - 737 mm Z Travel - 787 mm

ID	MA37912
Make	Farrel
Model	Fixed Rail
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
TABLE DIA - 4877 MM MAX. SWING - 5182 MM MAX. HEIGHT UNDER TOOL - 1829 MM RAM STROKE - 1372 MM RAM CROSS SECTION - 241x254 MM TABLE SPEED - 5-35 RPM MILLING SPEEDS,2 RANGES - TO 2000 RPM MILLING MOTOR, AC VARIABLE SPEED - 15 HP RAM TOOLING - SANDVIK C-6 TABLE WEIGHT CAPACITY - 125 TON MAIN MOTOR - 100 HP EQUIPPED WITH FANUC 0T-I CNC CONTROL RETROFIT 2014 C-AXIS TABLE WITH LIVE MILLING DRLLING ATTACHEMENT NEW AC DRIVES ADDED IN 2014 NEW HEIDENHAIN SCALES ADDED IN 2014 HARDENED & GROUND WAYS BELLOW TYPE WAY COVERS ON CROSS RAIL CHIP CONVEYOR ENCLOSURE GUARDS 4 TABLE JAWS 100 HP MOTOR

ID	MI10361
Make	Youji,Taiwan
Model	YV1600ATC
YOM	2000
Condition	Good Condition
Photo	See Photo
Capacity: Table diameter: 1600 mm Max. swing: 2000 mm Max. cutting diameter: 1800 mm Max. cutting height: 1200 mm Max. load table: 8000 kg

ID	MI10348
Make	OM
Model	TMS2-23/50
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck : 2300mm, Swing : 5000mm, Height : 2000mm Fanuc 21T Control

ID	MI10344
Make	Webster & Bennet
Model	DH36
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Chuck: 900mm Swing: 1000mm Height; 650mm Fanuc Oi- TF plus Jaws, Motors, complete with tria

ID	MA37845
Make	Dorries-Scharmann
Model
YOM
Condition	Good Condition
Photo	See Photo
DIMENSIONS Machine table diameter: Maximum turning diameter: Maximum working height: Maximum load capacity: AXIS TRAVELS Horizontal travel (X axis): Vertical RAM travel (Z axis): Vertical traverse travel (W axis): WORKING AND RAPID SPEEDS X Axis: W Axis: 2200 mm 2400 mm 1800 mm 17000 kg +/- 1350 mm 1500 mm (in steps of 100) 1200 mm Working 3000 mm/1’ Rapid 10000 mm/1’ Rapid 425 mm/1’ Vertical lathe DORRIES CONTUMAT 2 13 TURNING TABLE Max power: Max rotation speed: 1st range: 2nd range: Positioning accuracy: MILLING DRIVE Max power: Max rotation speed: 1st range: 2nd range: CONTROL UNIT SIEMENS SINUMERIK 840 C TOOL MAGAZINE Max number of tools in turning magazine: Max number of tools in milling magazine: Tool type: 63 kW 250 RPM 1.9-16-63 RPM 8-63-250 RPM +/- 10 sec 30 kW 3000 RPM 10-224-950 RPM 32-710-3000 RPM 21 28 SK 50

ID	MA37839
Make	Youji,Taiwan
Model	YV-800A
YOM	2007
Condition	Good Condition
Photo	See Photo
Max swing diameter Ø 1.000 mm Max turning diameter Ø 900 mm Max turning height 700 mm Max weight load capacity on chuck 3.000 Kg Spindle nose ASA A2-11 Chuck diameter Ø 630 mm Rotational speed range 20 – 600 rpm Spindle speed steps 2 Steps Spindle motor power (cont./30min.) 18.5/22 kw X axis +750 / -50 mm Z axis 850 mm X axis rapid feed 12.000 mm/min Z axis rapid feed 20.000 mm/min Turret stations 6 stations Tools dimensions 32 x 32 / Ø50 mm Accessories Coolant tank with pump Chip-conveyor Manuals, Electrical Diagrams and EC CE Declaration MACHINE DIMENSIONS Length 4.400 mm Width 2.650 mm Height 3.350 mm

ID	MA37836
Make	Victor-Taichung
Model	Vturn-V760
YOM	2010
Condition	Good Condition
Photo	See Photo \| See Video
Bed swing over diameter: 900mm Saddle swing over diameter: 650mm Maximum machining diameter: 760mm Maximum machining height: 760mm Standard machining diameter: 630mm X-axis travel: 380+40 (380+30 for CV) Z-axis travel: 780mm Maximum spindle speed: 2000rpm Spindle nose: A2-11 Spindle bore: 105mm Bearing inner diameter: 160mm Chuck size: 18 inches ( can change to max 24 inch ) Maximum workpiece weight: 1160KG Number of tools: 12 Reconditioned: Spindle bearings replaced new All Linear guideways and bearings replaced new . Telescopic replaced new , Original factory parts :

ID	MA37816
Make	Hankook
Model	VTC 125E
YOM	2015
Condition	Good Condition
Photo	See Photo
- Max. turning diameter 1,600mm - Max. turning height 1,400mm - Max. load on table 8,000Kg - Table diameter 1,250mm - Table speeds 0.9~360rpm - Table drive motor AC 45/37KW - Mill Spindle Motor AC 15/18.5KW - VTC type 30~30,000rpm - VTC type 0.001deg – Indexing Degree

ID	MA37815
Make	Dorries-Scharmann
Model	VC 6500/600MC
YOM	1999
Condition	Good Condition
Photo	See Photo
with CNC NUM 1060 hydrostatic guideways 6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm. angular milling head automatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50 coolant attachment and chip conveyor faceplate diameter 6000 mm swing diameter 6500 mm turning height 3000 mm slide stroke 2500 mm cross rail adjustment - vertical 1800 mm faceplate turning speed range 0,40 - 78 U/min workpiece weight max. 80.000 kg main drive motor 150 kW total power requirement 180 kW weight of the machine ca. t dimensions of the machine ca. 15 x 10 x 8,7 ü.F. m

ID	MA37813
Make	OM
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Table 1800. Working height 1500

ID	MA37808
Make	Takisawa
Model	TK2-CNC
YOM
Condition	Good Condition
Photo	See Photo
Chuck Size - 8 Inch Control - Fanuc

ID	MA37800
Make	YUJI
Model	YV-600A
YOM	1998
Condition	Good Condition
Photo	See Photo
Table:600mm， fanuc 0T Max. swing diameter Ø850 mm Max. turning diameter Ø750 mm Max. turning height 600 mm Max. work-piece weight 1800 KG Spindle speed 1500 rpm ATC:6T

ID	MI10260
Make	UTITA
Model	TV-1500CN
YOM
Condition	Good Condition
Photo	See Photo \| See Video
With Automatic Tool Changer Chuck Size: 1,500 mm Max Turning Dia: 1,850 mm Max Height: 1,100 mm

ID	MA37740
Make	Mario Carnaghi
Model	REMAC 2500 (TG-20)
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck Diameter (face plate) Ø 2.000 mm Max. Turning Dia. Ø 2.500 mm Max. Turning Height 1.600 mm Max. Vertical Slide Travel 1.000 mm Max. Load Capacity on Chuck 20.000 Kg Spindle Speed 150 Rpm Spindle Speed Steps (Gear Box) Nr. 4 Steps RAM Section 250 x 250 mm Tool Magazine Capacity 18 positions

ID	MA37729
Make	HNK Machine Tool-Korea
Model	NT-12/16F
YOM	2009
Condition	Good Condition
Photo	See Photo
Control Fanuc 18i-TB Travel X - -200/+970 Z - 600 mm Table 1250 mm Max. Swing 1600 mm Max. load 8000 Kg Speed 360 rpm Power AC 37/45 Kw Ram size 200 x 200 mm ATC 11 tools Chip conveyor Chiller 100 mm table attachment for chip removal *Under power

ID	MA37728
Make	Toshiba
Model	TUE-15
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
Control : Fanuc 18T Travel X : -99 ~ 1100 mm Z : 899 mm (Ram vertical) Vertical Travel of Arm : 1050 mm (not nc) Table Dia. : 1500 mm Table Speed : 2 ~ 75 rpm 8 ~ 250 rpm Max. Table Load : 7980 Kg Swing : 1800 mm Max. Cut D : 1800 mm Workpiece H : 1720 mm Max. Cut H : 1498 mm ATC : 12 tools Motor : 29.8 Kw Some tools Machine weight : 16,800 Kg

ID	MA37727
Make	KDM
Model	KTC-12/16F
YOM	2012
Condition	Good Condition
Photo	See Photo
Ram Stroke (Z) 900 mm Table 1250 mm Max. Swing 1600 mm Speed 350 rpm Power 45 Kw ATC 12 tools Chip conveyor Chiller 100 mm table attachment for chip removal

100

ID	MA37726
Make	HNK Machine Tool-Korea
Model	NT-12/16F
YOM	2008
Condition	Good Condition
Photo	See Photo
Control Fanuc 18i-TB Travel X - -200/+970 Z - 600 mm Table 1250 mm Max. Swing 1600 mm Max. load 8000 Kg Speed 360 rpm Power AC 37/45 Kw Ram size 200 x 200 mm ATC 11 tools Chip conveyor Chiller 100 mm table attachment for chip removal *Under power

101

ID	MA37715
Make	OM
Model	TMD 4055
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Table Diameter : 4000mm Max. Turning : Side 1 : 4500 Side 2 : 4100 Max. Job Dia: Side 1 : 5000 Side 2 : 5500 Max. Job Height: Side 1 : 2500 Side 2 : 2900 Max. job Wt. : 14000 kg Motor of Chuck : 75 kW

102

ID	MI10187
Make	TITAN
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Check 2500mm Swing 2700mm Ht 2000mm

103

ID	MA37683
Make	Mario Carnaghi
Model	TG 20/2200
YOM	1994
Condition	Good Condition
Photo	See Photo
Chuck Diameter (face plate) Ø 1.750 mm Max. Turning Dia. Ø 2.200 mm Max. Turning Height 1.600 mm Z Axis Travel 1.200 mm Spindle Speed 150 Rpm Spindle Speed Steps (Gear Box) Nr. 4 Steps RAM Section 250 x 250 mm Rapid Feed-Rates axes X/Z 5.000 mm/min Tool Magazine Capacity 12 pos. CN CONTROL E.C.S.

104

ID	MA37680
Make	Pietro Carnaghi (Italian)
Model	REMAC V-1800(AC-15)
YOM	2013
Condition	Good Condition
Photo	See Photo
Chuck Diameter (face plate) Ø 1.500 mm Max. Turning Dia. Ø 1.600 mm Max. Turning Height 1.400 mm Z Axis Travel 1.100 mm Spindle Speed 300 Rpm Spindle Speed Steps (Gear Box) Nr. 4 Steps RAM Section 200 x 200 mm Tool Magazine Capacity 18 pos. Turret Stations 5 Stations

105

ID	MI10084
Make	YUJI
Model	YV320E2T+S
YOM
Condition	Good Condition
Photo	See Photo
Controll Fanuc 18T Chuck 12" (300 mm.) Max Turning Swing Dia.600 mm. Max. Turning High 500 mm. Weight 11 ton

106

ID	MA37562
Make	YUJI
Model	YV320E2T+S
YOM	2003
Condition	Good Condition
Photo	See Photo \| See Video
Controll Fanuc 18T Chuck 12" (300 mm.) Max Turning Swing Dia.600 mm. Max. Turning High 500 mm. Weight 11 ton

107

ID	MI10078
Make	TITAN
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia: 2000mm Swing Dia: 2200mm Height: 2000mm Min distance from table to cross slide: 300mm Max distance from table to cross slide: 2000mm ATC: 12 Stations Controller: Fanuc OiTF-Plus

108

ID	MI9959
Make	KOLOMNA
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck: 5000mm Swing: 5300mm Height: 3000mm Control: Seimens

109

ID	MI9919
Make	Youji,Taiwan
Model
YOM	2003
Condition	Good Condition
Photo	See Photo
Chuk 300 Swing 600

110

ID	MI9918
Make	Youji,Taiwan
Model	YV 250E
YOM	2012
Condition	Good Condition
Photo	See Photo \| See Video
Capacity - Max. Swing Diameter -500 mm Max. Cutting Diameter -350 mm Max . Cutting Diameter -250 mm Spindle - Spindle Speed-50 ~2500 Rpm Spindle Bearing Diameter - 100 Spindle Nose -A2-8 Turret type horizontal No . of tools -8 Tool Tank size -25 ,32 mm X axis Travels - -50: +200 Z axis Travels -450 mm X - Axis Rapid Travrse-12 m/min Z Axis Rapid Travrse-20-m/min spindle motor -11/15 kw X axis Servo Motor -1kw Z axis sevo motor -2.1 kw Floor dimension -1480 x2880 mm net weight -3000 total power consumotion 25 Kva

111

ID	MA37423
Make	Hwacheon
Model	VT-450
YOM	2004
Condition	Good Condition
Photo	See Photo
FANUC SERIES 18i-TB CNC CONTROL MACHINE WEIGHT 7,500 Kg MACHINE DIMENSIONS Length 3,350 mm Width 1,850 mm Height 2,660 mm Capacity Max rotating diameter Ø 610 mm Max turning diameter Ø 460 mm Max turning height from chuck 460 mm Spindle ASA A2-8 spindle nose Self-centering diameter Ø 315 mm Spindle rotation speed 30 - 2,500 rpm Spindle motor power (cont./30min.) 18.5/22 kw Racing X axis 260 mm Z axis 480 mm Advancements Rapid X axis 24,000 mm/min Rapid Z axis 20,000 mm/min X / Z axis work feed in linear interpolation max. 500 mm/rev Turret Turret stations 8 stations Turning/boring tool size 25 x 25 / Ø50 mm Accessories Refrigerant collection tank with washing pump Belt chip conveyor, exit on the rear side Various tool holders (fixed / boring bar holders) Manuals, electrical diagrams and CE declaration

112

ID	MI9916
Make	TITAN
Model	SC27
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
Chuck Dia: 2500mm Swing Dia: 2700mm Height: 2300mm Min distance from table to cross slide: 300mm Job Height : 2300mm ATC : 12 Stations Controller : Fanuc OiTF-Plus New Installed in November 2023 X/Z Axis Beta 40/2000 with Analog Spindle Spindle Drive: Baumuller Model: BKF/BKD 7000 Spindle Motor: IEG (Ind Elettrom Giuliane) 3 Stage Gear Box.

113

ID	MI9915
Make	TITAN
Model	SC33
YOM	1999
Condition	Good Condition
Photo	See Photo
Controller: NUM Chuck Dia: 3000mm Swing Dia: 3300mm Height: 2800mm C Axis ATC: 12

114

ID	MI9913
Make	Youji,Taiwan
Model
YOM	2011-2012
Condition	Good Condition
Photo	See Photo
Chuck:- 300 mm, Max. Swing: 600, Max Cutting dia: 450 mm, Spindle:- A28 Power :- 18/22 KW Height:- 450 mm Controller:- Fanuc oitd Machine equipped with chipconveyor, spindle chiller unit & transformer. 2 machine available for sale, left& right, imported machine, not used in India.

115

ID	MA37344
Make	Gemar
Model	SC25/33
YOM	2006
Condition	Good Condition
Photo	See Photo
• CONTROLLER SIEMENS 840D • MAX. TURNING DIA.: MM 3250 (with extensions mounted) • TABLE DIAMETER: MM 2500 • MAX. TABLE LOAD: KG 15000 • MAX. ADMITTED WORKPIECE HEIGHT: MM 1800 • MAIN MOTOR POWER: KW 60 SIEMENS • TABLE SPEED RANGE: 2-100 RPM • CROSS RAIL VERTICAL TRAVEL 1400MM • VERTICAL TRAVEL Z: 1200MM • TOTAL MACHINE WEIGHT: KG 44000 Machine features: • TOOL MAGAZIN 12 POS • CROSSRAIL INDEXING • TOOL COOLING • AIR CONDITIONATED ELECTRICAL CABINET

116

ID	MA37320
Make	Dorries Germany
Model	CTE300– 5100V6
YOM	1980
Condition	Good Condition
Photo	See Photo
Chuck diameter 3.000 mm Max. Swing 6.000 mm Max. Turning height 2.700 mm Max. Table Load 50 ton Travel : X - Axis 2.550 mm Z – Axis 1.250 mm Y – Axis 5.054 mm Column travel 1.250 mm Machine weight 130 ton Control Siemens 840C Incl. Angle Milling attachment Machine is in very good condition and can be seen under power

117

ID	MA37293
Make	BERTHIEZ
Model	9375
YOM	Retrofitted in 2017 with Siemens 840D
Condition	Good Condition
Photo	See Photo \| See Video
Ø 6300 mm CNC Chuck dia. 3300 mm Max turning Día -- passage 6300 mm Power on the spindle 75 kW Max Hight of workpiece Z-axis 2600 mm Command Siemens 840D Number of speeds 13 / 36 / 100 rpm Weight 93 ton TOOLING yes Diameter of table 3600mm Maximum diameter to be turned 6300mm Maximum diameter to be turned to centre with left-hand toolhead on arm, when arm is equipped with two toolheads 5300mm Maximum diameter to be turned to centre when arm is equipped with one toolhead only 6100mm Maximum height available under arm 2600mm Vertical travel of ram on arm 1250mm Horizontal travel of ram on upright 1250mm Swivel of toolheads on arm, either side of the vertical 45 + 30 Continuous speed range of table 0.60-60rpm No.of toolhead feads 21 Range of toolhead feeds 0.16-16 mm/rev. Power of main drive motor 75hp Power of ward Leonard sets asynchronous motor 95 hp Power of each quick power traverse motor for toolheads 4 hp Power of Lifting motor of arm 10 hp Power of motor for power traverse of table support 5 hp Approximate net weight 93 metric tons - max diameter to be turned to centre: 6100 mm - max workpiece height under arm: 2700 mm - vertical travel of ram: 1250 mm - vertical travel of tool head: 1250 mm - horizontal travel of blue tool head: 2485 mm - swivel angle of tooldhead: 45° + 30° - turntable is movable in order to accommodate workpieces up to 6 meter in diameter - max load on table: 50 ton - power on table: 75 kW - 3 variable speeds of table (CNC controlled): 1 / 13 rpm / 14 / 36 rpm / 37 / 100 rpm - positioning of the table is done by two buttons, once the correct position is reached the position can be nulled on the digital readout

118

ID	MA37290
Make	Dorries Germany
Model	SD 600/6500
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Ø 6500 x 4270 mm CNC Chuck dia. 6000 mm Max turning Día -- passage 6500 mm Power on the spindle 200 HP Max height of workpiece Z-axis 4270 mm Command Siemens/Heidenheimer Number of speeds 1 / 40 rev/min Long 20 500 mm Wide 8500 mm Height 6290 mm (above ground-level) Weight 180 ton 4 axes controlled, ball screws between columns: 6500 mm max height below cross-beam: 4270 mm vertical movement of cross-beam: 2500 mm max weight on table: 160 ton torque of the table: 30 000 MKP, 200 HP Vertical movement of Z1 & Z2: 1750 mm Two Independent scissor lifts on each side of the lathe, with control unit

119

ID	MA37276
Make	Pietro Carnaghi (Italian)
Model	ATF14TM
YOM	2001
Condition	Good Condition
Photo	See Photo
CNC VTL 1400 Control Siemens 840 C The Turning and milling vertical Lathe Model ATF has been designed with a very compact termo-symmetrical structure with one single column on the machine base. The ATF can is Equipped with a double Pallet system, rotating 0-180, useful to make a part centering on the external pallet, while with the internal pallet is in a machining process. Turning diameter 1600mm Pallet Diameter 1250mm Table Load 3 T Turning Height 1300mm Turning Speed 6000rpm Turning Power 60kW Rapid feed: X/Y/Z 15000mm/min Ram Size: 250x 250mm Inner Boring Dia: Dia 355mm Tool Section: 38x 38mm C-Axis 360/6rpm Machine Weight 47T

120

ID	MA37253
Make	Richards-Craven
Model
YOM	2012
Condition	Good Condition
Photo	See Photo
(RCD) 13m (512”) Fanuc CNC controls. MACHINE TYPE DOUBLE COLUMN, DOUBLE RAM TABLE SIZE (DIA) 5,500mm (216.5”) MAX SWING (adjustable column) 13000 MM WORKING HEIGHT UNDER RAIL 3,000mm (120”) RAM STROKE 1,600mm (63”) MACHINE MAKE RCD , ENGLAND MOTOR CAPACITY 70 HP LOAD ON TABLE 35 TONS (77,000 Lbs) Total Machine weight 155 Tons (341,000 Lbs) Distance between column 6m (240”) Max weight job run by present owner 21 Tons (46,200 Lbs) Maximum swing diameter machined by present owner 9.5m (374”)

121

ID	MI9721
Make	Webster & Bennet
Model
YOM	1999
Condition	Good Condition
Photo	See Photo
Table Dia.: 1850mm Max Swing: 2000mm Max Dia Under the Rail: 1600mm C Axis with Live Tools Tools Changer 12 4 Jaw Chuck Control: Siemens 840D

122

ID	MI9702
Make	Jyoti
Model
YOM	2015
Condition	Good Condition
Photo	See Photo
Chuck : 500 mm Max. Swing Dia : 725 mm Max. Turning Dia : 500 mm Max. Turning Length : 500 mm

123

ID	MA37196
Make	Pietro Carnaghi (Italian)
Model	AP140TMY
YOM	2013
Condition	Good Condition
Photo	See Photo \| See Video
Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max. RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Machine is packed in containers and ready for shipment.

124

ID	MA37117
Make	Giddings & Lewis
Model	VTC1250
YOM	2003
Condition	Good Condition
Photo	See Photo
TABLE DIAMETER 1250 MM MAXIMUM TURNING DIAMETER 1700 MM MAXIMUM HEIGHT UNDER RAM FACE 1500 MM RAM STROKE, Z-AXIS 1250 MM RAM TRAVEL, LEFT OF CENTER 1060 MM RAM TRAVEL, RIGHT OF CENTER 1060 MM RAM CROSS SECTION 250 MM X 250 MM TABLE SPEEDS, 2-RANGES 4-500 RPM TABLE MOTOR 100 HP RAPID TRAVERSE 787 IPM EQUIPPED WITH: FANUC 160I-TB CNC CONTROL 1250 MM 3-JAW HYDRAULIC CHUCK 26-POSITION AUTOMATIC TOOL CHANGER (6-WEDGE & 20-KM80) COOLANT THROUGH RAM THREAD CUTTING TOOL RETRACT RETURN OPTION STEEL SLIDING WAY COVERS PROBING HEIDENHAIN LINEAR SCALES CHIP CONVEYOR 100 HP TABLE DRIVE

125

ID	MA37114
Make	Webster & Bennet
Model
YOM
Condition	Good Condition
Photo	See Photo
Webster & Bennett CNC Ram Type VTL Year 1986 Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Automatic Tool changer Tooling Table Jaws Swarf Conveyer Condition: Used Manufacturer: Webster & Bennett

126

ID	MA37015
Make
Model
YOM	1996
Condition	Good Condition
Photo	See Photo
Moriseki MV-665/50 ATC30 Station Angular head attached

127

ID	MA36978
Make	TITAN
Model	SC43 M SH-CNC
YOM	1986
Condition	Good Condition
Photo	See Photo
Fanuc Oi TF Controller Face Plate Dia MM 4000 Max Swing mm 4300 Max Swing height 2500 mm Max loading admitted 18000 kgs Faceplate Speed Range 1-92 RPM Feeds Range MM/GIR 0,05-5 Carriages rapid feeds mm/min 2500 Main Motor Power kw 55 Machine Weight AB. 64 Ton

128

ID	MA36964
Make	Sedin Russia
Model	1L532
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Table Size 2800 mm Max Swing 3350 mm Max Turning Height 1200 mm Max Table Speeds 34 rpm Vertical support 2 pcs Control : Siemens Sinumerik 840 d Equipped with : Chip Conveyor Standard jaws for clamping

129

ID	MA36962
Make	Sedin Russia
Model	1525
YOM
Condition	Very good condition
Photo	See Photo \| See Video
Table Size 2300mm Max Swing - 2500 mm Max Turning height - 1300 mm Max Table speeds 30 rpm Vertical Support 1 Tool Changer w/12 stations Control - Siemens Sinumerik 840 d Equipped with -: Various jaws for clamping

130

ID	MI9223
Make	Youji,Taiwan
Model	YV1200-ATC
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck 1200 Max swing 1600 W axis column movable Fanuc Oi-TC Complete with chip conveyor, chiller, step down transformer and some holders.

131

ID	MA36778
Make	Youji,Taiwan
Model	YV1200-ATC
YOM	2008
Condition	Good Condition
Photo	See Photo
CNC Vertical Lathe Chuck 1200 Max swing 1600 W axis column movable Fanuc Oi-TC Complete with chip conveyor, chiller, step down transformer and some holders.

132

ID	MA36757
Make	O-M
Model	Neo-80
YOM	2004
Condition	Good Condition
Photo	See Photo
Table 1600 Swing 2000 TH 1600 Z stroke 900 Fanuc 18iT ATC 12

133

ID	MA36750
Make	Toshiba
Model	TXN16/3
YOM
Condition	Good Condition
Photo	See Photo
TABLE DIA 63" SWING 78" WORK HT-U/R 63" POWER 60 hp RPM 315 RPM CONTROL CNC (Fanuc 6T) Toshiba TXN-16 CNC Vertical Boring Mill 12 Station ATC 62.99'' Table 4-Jaw Chuck 78.74'' Turning Diameter 62.99'' Turning Height 74.80'' Height Under Ram 35.4'' Vertical Ram Travel Table Speeds 3.2-315 RPM Table Capacity 15,400lb Chip Conveyor 60 HP Fanuc 6-T CNC Control

134

ID	MI9188
Make	Morando
Model
YOM
Condition
Photo	See Photo
Dia 2000. Swing 2100. Vertical 2500 mm

135

ID	MI9185
Make	Dalian
Model	CK5250
YOM
Condition	Good Condition
Photo	See Photo
Chuck size : 3600mm Swing : 4000mm Ram Travel : 1000mm Max heightbof work pc : 2000mm Max weight of workpiece: 32 Max RPM : 2 to 50 Control : 802 SL

136

ID	MI9166
Make	Dorries Germany
Model	VCE2000/140
YOM
Condition	excellent working condition
Photo	See Photo
CNC RAM -TYPE VTl Machine Table Diameter - 1400 mm Max. Swing Diameter - 2100 mm Max. Height under Crossrail to Table - 1900 mm Ram Travel - 1500 mm CNC Control - Fagor 8055T Automatic Tool Changer - 12 Station ATC Table Speed Range - 2 rpm to 224 rpm RAM Size - 240 mm x 240 mm Rapid Traverse Speeds - 6 m/min Weight of the Machine - 41 Tons (Approx.) - Retrofitted in 2008 with Fagor CNC Controller - Cross-Rail, Slides & Ram are completely scractless. - Operating Manuals, Electrical Drawings, Service Manuals etc are available.

137

ID	MI9163
Make	Tamaki-Japan
Model	NV600T
YOM
Condition	Good Condition
Photo	See Photo
power chuck dia: 400, swing: 850, turning dia: 700 height: 450 mm) with Fanuc OTC control with open drives, A11 spindle, 4 tool Turret, mc. Weight: 11 ton, Chip conveyor for sale

138

ID	MI9158
Make	Bullard Dynatrol
Model
YOM	1998-1999(Retrofitted and Modernized)
Condition	Good Condition
Photo	See Photo
sytem FANUC SERIES 15-T - number of working hours 28000 - table diameter 56 inch (1422 mm) - max swing appr. 1800 mm (distance from table axis to column is 900 mm) - workpiece height 900 mm - one head - tool clamping CAPTO 6 (+ shape, dimension 290x270 mm) - no C axis or driven tools - very good condition - RENISHAW tool usage measuring/ touch probe - required area W5000 x Depth 5500 + control panel on 1600 mm arm in right front side of the machine - reason for sale is purchase of new equipment and free space requirement - good reliable and simple to use machine - accurate machine (we were told 0,015 mm) - many-many spare parts for approximatelly 25-30000 EUR, like new main motor, brand new FANUC drive, small motors, valves, filters, bearings, belts, pipes, electric components and etc

139

ID	MA36685
Make	OM
Model	Neo-80
YOM	2004
Condition	Good Condition
Photo	See Photo
Table 1600 Swing 2000 TH 1600 Z stroke 900 Fanuc 18iT ATC 12

140

ID	MA36684
Make	Hankook
Model	VTC140
YOM	2007
Condition	Good Condition
Photo	See Photo
Table dia : 1400mm Swing dia : 1600 mm Max. Turning height : 900 mm Load weight 8Ton Ram Size 220mm x 220mm Table rotation speed 0.8 ~ 320RPM 2Step C-axis minimum division angle 0.001Deg Table motor AC37 / 45Kw Spindle spindle speed 30 ~ 3000RPM Spindle spindle motor 15 / 18.5Kw 24 ATC (Milling 12Pcs / Turning 12Pcs) Tool Size 32mm x 32mm Installation Area 4875mm x 3885mm x 4690mm Machine Weight 20Ton Chip Conveyor System Fanuc 18i-TB

141

ID	MI9141
Make	Tamaki-Japan
Model	NV600T
YOM
Condition	excellent working condition
Photo	See Photo \| See Video
Power Chuck Dia:400mm Swing :850mm Turning Dia :700mm Height :450mm Control : Fanuc OTC With Open Drives Spindle : A11Turret : 4 Tool Chip Conveyor Step down Transformer. Machine weight: 11 Ton.

142

ID	MI9134
Make	Schiess Froriep
Model
YOM
Condition	Complete,working condition
Photo	See Photo \| See Video
VTL RAM Type Chuck Dia :1250mm Swing :1400mm Height :1200mm With APC and ATC Control:Fanuc Oi TD With Milling Head 1430 is the gap between Tool post bottom to chuck.

143

ID	MI9108
Make	TOS
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Main technical data (1 mm = 0,0394 inch) Working range (metric) (inches) Biggest peripheral turning diameter mm 1400 inch 55,16 Biggest facing diameter mm 1400 inch 55,16 Biggest distance between the table and the ram clamping surface mm 1500 inch 59,1 Ram cross section mm 240 x 240 inch 9,5 x 9,5 Biggest ram stroke mm 1280 inch 50,43 Biggest workpiece diameter Biggest workpiece height mm 1400 inch 55,16 -if the tool holder with the length of 200 mm (7,88 inch) mm is applied 1300 inch 51.22 Biggest workpiece weight in dependence on the table speed kg 8000 Lb 17637 Biggest cutting force in dependence on the ram extension N 50000 Lbs 11237 Biggest cross section of the tool shank mm 40x40 inch 1,6x1,6 Cross rail Biggest cross-rail stroke mm 800 inch 31,5 Cross-rail shifting speed mm/min 287 ipm 11,3 Table Table diameter mm 1250 inch 49,25 Speed infinitely variable in two steps for the direction of rotation to the right and to the left increased speed 1st step 1/min 3,2-124 rpm 3,2-124 2nd step 1/min 12,8-500 rpm 12,8-500 Biggest torsional moment on the table Nm 24250 Lb.ft 17862,5 Power output of the main AC drive kW 60 HP 82,5 Feed Working feed mm/min 1-4000 ipm 0,0394-157,6 Rapid traverse mm/min 12000 ipm 472,8 Feed per revolution up to max. 4 m/min (157,6 ipm) mm/rev 0,001-50 ipr 0,0000394-2 Thread cutting with lead (up to max. 4 m/min, 157,6 ipm) mm/rev 0,01-400 ipr 0,000394-15,8 Drive for rotary tools Speed of rotary tools programmable in two ranges 1 st speed range 1/min 4-750 rpm 4-750 2 nd speed range 1/min 751-3000 rpm 751-3000 Biggest torsional moment on the rotary tool spindle Nm 573 (S1) Lb.ft 422 (S1) 707 521 (S2=30min) (S2=30min) Power output of the AC drive for rotary tools 15 (S1) 20,62 (S1) kW 18,5 HP 25,4 (S2=30min) (S2=30min) 3rd controlled C-axis Table speed - C-axis 1/min 0,01-7,4 rpm 0,01-7,4 Minimum torque on the table (it is limited by the admissible overload of the servo drive Nm 2450 Lb.ft 1804,7 and by the clutch) Maximum working feed mm/min 500 imp 19,7 Additional dimensions Horizontal rail-head path from the table centre to the right / to the left mm 840/750 inch 33,1 / 29,55 Horizontal rail-head path from the centre to the right up mm 2020 inch 79,59 to the tool exchange place Distance from the machine base to the table working surface mm 920 inch 36,25 Biggest height from the table working surface to the lower edge of telescopic covers for the rail-head guiding ways mm 1530 inch 60,1 Operating data Noisiness - equivalent sound level LAeq in the operator's place dB(A) max. 80 Lubricating oil consumption for ca 1000 operating hours litre 5 gal 1,3 Lubricant pressure MPa 3 psi 435 Pressure in the hydraulic distribution system MPa 9,5 psi 1377 Oil filling in the hydraulic set and in the hydraulic distribution system litre 130 gal 34 Coolant tank filling TOSHULIN - fill only this tank before putting the machine into operation litre 450 gal 119 Number of tools in the tool holder magazine pcs max. 29 Biggest weight of cut chips - at maximum chip removal kg/min 7 Lb/min 15,4 Coefficient of synchronous running of electric motors 0,85 Nominal voltage V 3x 460 Frequency Hz 60 Total machine power input kVA 100 Machine dimensions Machine height mm 5855 inch 230,69 Built-up area machine, electrical switch box, workplace, hydraulic set, mm 7530x4930 inch 296,68x194,44 coolant tank Total machine weight cca kg 2650 cca Lb 58423

144

ID	MA36611
Make	IMT Italy
Model	S32
YOM
Condition	Good Condition
Photo	See Photo
CNC FANUC 18iT AXIS C LIVE TOOLS ROTOPALLET CAPACITY: Max swing diameter 800 mm Max turning diameter 650 mm LATHE SPINDLE: Max spindle speed 1800 rpm Spindle taper ASA 15'' Spindle motor power in c.a. (S1) 60 kW MILLING SPINDLE: Max spindle speed 4000 rpm Spindle motor power 15 kW STROKES: Axis X stroke mm 1000 Axis Z stroke mm 650 TOOL CHANGE: Tool change 54 live positions Max tool weight 15 Kg Max weight on tool change 600 Kg GENERAL DATA: Total machine weight 17.000 Kg Max used power 100 kW

145

ID	MA36610
Make	Morando
Model	KL14
YOM
Condition	Good Condition
Photo	See Photo
CNC ICEM Spindle diameter mm 1450 Turning diameter mm 1680 Max turning height mm 1100 Cross stroke mm 1000 RAM stroke mm 1100 Taper ISO 50 EQUIPPED WITH: Double RAM 4 positions Duplomatic automatic square turret TAN 270x270

146

ID	MA36609
Make	Victor-Taichung
Model	V1000C
YOM
Condition	Brand New
Photo	See Photo
VERTICAL WITH LIVE TOOLS Strokes: Max swing diameter 1100 mm Max turning height 825 mm Max turning diameter 1000 mm Axis X 500+40 mm Axis Z 850 mm Spindle: Max speed 1500 rpm Spindle nose ASA A2-15 Max workpiece weight (chuck included) 1250 Kg Turret: No.12 positions Max speed 3000 rpm Taper BMT-85 Feeds: Rapid feedrates X - Z 20 - 20 m/min X axis screw diam. 50 x 8 mm Z axis screw diam. 50 x 8 mm Motors: Spindle motor 37 - 45 kW Live tool motor 7 kW Servomotor X axis - Z 4 - 7 kW General info: Lenght 2510 mm Width 4155 mm Height 3546 mm Weight 16000 kg ACCESSORIES INCLUDED: -CNC 0i-TF Plus (15'') Type 0, color graphic display, Manual Guide I, keyboard ONG, electronic wheel -Serial output, ethernet e USB -Belt spindle, 1500rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 -Without chuck -Servo turret BMT, 12 position. with live tools -Chip conveyor -High pressure pump 15 BAR -End work cycle and alarm lamp 3 colors -Machine area working light -Adjusting wedges -Tool box with service tool -Air blowing through spindle -Live tool motor increased - from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) -Pressure release (dual pressure) -Tool setter manual Renishaw M.T.P. -Oil skimmer -Kit static toolholder -Preparation for exhaust fume -Color black

147

ID	MA36608
Make	Defum Poland
Model
YOM	2009
Condition	Good Condition
Photo	See Photo
Table 1000mm Max turning diametr. 1300mm

148

ID	MA36604
Make	Pietro Carnaghi (Italian)
Model	ATF14TM-1250
YOM	2001
Condition	Good Condition
Photo	See Photo
Controller: Siemens Sinumerik Front Plate Diameter:1400mm Swing Dia:1500mm Max allowable Weigth:3 Tons Turning Power: 60/100 KW Ram Section: 250mm x 250mm Ram stroke Z axes:1000mm Milling Power:37KW Max RPM:3000-(6000) Rapid Feeds X-Z axes: mm/min: 30,000 Turning Height:1670mm Number of Tools:40

149

ID	MA36602
Make	Massa
Model	YV1600ATC
YOM	2008
Condition	Good Condition
Photo	See Photo
Maximum turning diameter 1800mm, maximum workpiece height 1200mm, workpiece weight 8,000kgs, Table size 1600mm, swing 2,000mm, Ram stroke 900mm, Cross-slide rise and fall 750mm, power 37Kw, able speed 1-250 rpm, 16 station ATC, Fanuc OI-TC control, swarf conveyor.

150

ID	MA36600
Make	You Ji
Model	YV-1200ATC
YOM	2008
Condition	Good Condition
Photo	See Photo
VTL 1200 mm table, Turing height 1200mm, ram 240x240mm Fanuc Control

151

ID	MA36599
Make	HNK Machine Tool-Korea
Model	NT-12/16F
YOM	2016
Condition	Good Condition
Photo	See Photo
Table 1250(HYD chuck 3 Jaw) Max. Turning dia. 1600 Max. Turning height 1000 Ram stroke 900 Ram size 200x200 FANUC 18T AC 37/45kW 320rpm ATC12

152

ID	MA36598
Make	Webster & Bennet
Model
YOM	1988/2005
Condition	Good Condition
Photo	See Photo
Siemens 840 Di CNC Control Table 48” Max swing 60” Max height under cross rail 40” Ram type machine with automatic tool changer Main motor 44KW Swarf conveyor and full surround guarding

153

ID	MA36597
Make	Webster & Bennet
Model
YOM	1986/2005
Condition	Good Condition
Photo	See Photo
Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Automatic Tool changer Tooling Table Jaws Swarf Conveyer

154

ID	MA36596
Make	Feeler,Taiwan
Model	FVT-1000
YOM	2016
Condition	Good Condition
Photo	See Photo
TECHNICAL DETAILS Swing diameter : 1000mm Maxi turning height : 850mm Spindle speed : 1100rpm Power : 45kW EQUIPMENTS INCLUDED ► Chuck diameter 810 mm, ► ZF gear box, ► Turret 12 tools – BMT 85, ► Tool probe, ► Coolant with filter 30 bars, ► Chip conveyor, ► Oil skimmer, ► Jaw sets, ► Tool holders ► Bar holders.

155

ID	MA36592
Make	HYUNDAI WIA
Model	LV800RM
YOM	2017
Condition	Good Condition
Photo	See Photo
Swing Over the Bed 890 MM Swing Over the Carriage 710 MM Max. Turning Length (Height) 800 MM Chuck Size 21 INCH Spindle Speed 1,940 RPM Spindle Type GEARED Spindle Nose A2-15 C-Axis Indexing 360˚ (0.001) DEG Travel (X/Z) 465/800 MM Rapid Traverse Rate (X/Z) 20/20 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS Spindle Bore 100 MM Turret - No of Tools 12 Tool Size - Od 32 MM² Tool Size - Id Ø 63 MM Turret - Index Time 0.2 SEC / STEP Motor (Max/Cont) 11.0 / 7.5 / 5.5 KW Milling Tool Speed 4,000 RPM Torque (Max/Cont) 140 / 95.4 / 70.0 NM Collet Size (Er40) Ø 26 MM Type BMT75P Coolant Tank 300 L Lubricating Tank 3.0 L Electric Power Supply 37.0 KVA Thickness Of Power Cable OVER 35 MM² Voltage 415V / 50HZ / 3PH Floor Space (L to R / F to B – Exc. Swarf Conv) 2,000 X 3,540 MM Height 3,845 MM Weight 9,500 KGS ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. 2,000 RPM – 21” 3-JAW HYDRAULIC CHUCK. 4,000 RPM DRIVEN TOOLING – 11.0 / 7.5 / 5.5 KW. HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. SPINDLE GEARBOX. RIGID BMT75 TURRET. 20 X 20 M / MIN RAPID TRAVERSE. FANUC 32IB CNC

156

ID	MA36587
Make	Doosan
Model	Puma VT900
YOM	2010
Condition	Good Condition
Photo	See Photo
Swing Over Bed : 39.4” Swing Over Saddle : 27.6” Recom. Turning Diameter : 24” Max Turning Diameter : 35.4” Max. Turning Length : 33.5” X-Axis Travel : 18.5” Z-Axis Travel : 33.5” Rapid Traverse X and Z : 787 IPM Spindle Speed : 1800 RPM Spindle Nose : A2-15 No. of Tool Stations : 12 Spindle Motor : 50HP Dimensions : 84” x 120” x 143” Machine Weight : 27,800 LBS Serial # VT901176 Run Time hours – 7177 Cut Time hours – 6330 Built in 07-2010

157

ID	MA36573
Make	TOS
Model	SK12
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia: 1200mm Swing: 1400mm Height;1000mm Control: CNC2400

158

ID	MA36558
Make	Schiess Froriep
Model	40DS350
YOM
Condition	Good Condition
Photo	See Photo
Maximum Turning Diameter: 4000mm maximum Height:2500mm Maximum Table Load Capacity:40,000 Kgs Vertical Travel of Crossrail:2000mm Vertical Tool Travel :1600mm Horizontal Tool Travel: 2660mm maximum Spindle speed: 1600 rpm Table Drive:100KW Control: Fanuc 16 TT-B CNC

159

ID	MI8962
Make	Schiess Froriep
Model
YOM	Newly Retrofitted in 2022 June
Condition	Good Condition
Photo	See Photo
Chuck Size: 1800 mm Turning Dia: 2000 mm Swing Dia: 2200 mm Turning length : 1000 mm Job turning Height: 1350 mm 4 Station automatic Hydraulic Turret X Axis 22 Nm FANUC Servo Motor With 50/10 Ground BallScrew Z Axis : 22 Nm with Brake FANUC servo motor ,40/10 Ground Ball Screw, Spindle: 22 kW /30 Hp Siemens Spindle motor with INOVANCE VFD 30 Hp for Variable Speed Spindle Encoder for threading is fitted to spindle Latest FANUC 0I-TF PLUS CONTROLLER New Control Panel Warranty 2 Years on FANUC Package

160

ID	MI8961
Make	Jungenthal,Germany
Model	0
YOM
Condition	Good Condition
Photo	See Photo
Chuck Size: 2000mm Swing :2400mm Height: 1700mm Grinding attachement Ram stroke:1200mm Control: Siemens Drive

161

ID	MA36540
Make	BERTHIEZ
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
Clamping plate diameter mm 1250 Maximum workpiece diameter mm 1500 Maximum workpiece height mm 1425 Maximum workpiece weight kg 8000 Slide lift mm 750 Crossbar lift mm 800 Clamping plate speed - normal min-1 2.5-250 Feed range - continuously mm rpm-1 0.01-49.99 Rapid feed mm min-1 6000 Power of the main engine kW 40 Weight kg 23250 Machine height mm 4900

162

ID	MA36538
Make	Rafamet
Model	KCH100
YOM
Condition	Good Condition
Photo	See Photo
Max diameter of turning is 1000mm. CNS Sinumerik 810 Table diameter 1000mm Table rotation 3 -275 rpm /4 rotation ranges/ Max turning diameter 1500mm Max workpiece height 700mm Tool change magazine for 12 pcs Max workpiece weight 4000kg Two supports : vertical and horizontal Machine dimensions: length/width/high 4700/3780/5700mm Machine weight 15000kg

163

ID	MA36537
Make	Rafamet
Model	KCH-500/800
YOM
Condition	Good Condition
Photo	See Photo
Max. machining cuttting diameter with vertical support 8 m Max. machining height: 4 m Max. table capacity: 100 tons CNC Table Size .5000 mm Controller . Siemens 840 dsl

164

ID	MA36532
Make	S&T
Model	TNL120V
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck-40" Hydraulic . Swing-1500mm. Turning dia-1300mm. with Fanuc- OiTD.

165

ID	MA36531
Make	Hankook
Model	VTC85R
YOM	2010
Condition	Good Condition
Photo	See Photo
System: F-32iT Table Diameter: 610 / Swing: 850 Maximum machining diameter: 850 Max processing height: 850 Turret: 12 each RPM: 15 to 1500 -OPTION- CHIP CONVEYOR&BUCKET

166

ID	MA36529
Make	Doosan
Model	Puma V8300R
YOM	2018
Condition	Good Condition
Photo	See Photo \| See Video
Chuck 15" Turning Dia : 830mm Turning length : 750mm Spindle speed : 2000 RPM Motor power 37kw Turret 12 tool Rapid (X,Z) 20m/min Tool size 32 x 32 mm

167

ID	MI8945
Make	BFW,India
Model	VTL-1250S
YOM	2009
Condition	Good Condition
Photo	See Photo \| See Video
maximum Turning Dia:1250mm Maximum Turning Length: 350mm Swing over Bed:1250mm Chuck face above ground level/Loading Ht :1000mm Chuck: 1250 x 3 Jaw Power Operated spindle speed range:50-600 RPM Max load carrying capacity:1000 KG Turret: BTP160 No Of Stations:8 Max Boring Dia: 50mm OD Turning Tool Size:40mm x 40mm Stroke: 650mm Rapid rate: m/min - 20 Controller: Fanuc oi TC

168

ID	MA36523
Make	OTEHERS
Model
YOM
Condition	Good Condition
Photo	See Photo
2 VTL: chuck Dia : 1200mm

169

ID	MA36522
Make	Tos Czech
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck Dia 1400mm

170

ID	MI8942
Make	Sedin Schiess
Model
YOM	2000
Condition	Good Condition
Photo	See Photo
Chuck size: 1400 mm Swing Dia: 1600 mm Height: 1250 mm Controller: Fanuc OiTF Plus Machine YOM : 2000 Controller Upgraded 2023

171

ID	MA36520
Make	Bullard,USA
Model	Dyn-Au-Tape
YOM
Condition	Good Condition
Photo	See Photo
TABLE DIAMETER 2743 MM MAXIMUM SWING 3048 MM HEIGHT UNDER RAIL 1981 MM RAM STROKE 1295 MM RAM CROSS SECTION 216 MM TABLE SPEEDS .85 - 102 RPM TABLE SPEEDS INFINITY VARIBLE 2-RANGES TABLE WEIGHT CAPACITY 84,000 LBS TABLE MOTOR 75 HP EQUIPPED WITH: FANUC OTT CNC CONTROL 2743 MM T-SLOTTED TABLE WITH 4 TOP JAWS 2-VERTICAL RAMS WITH 4-POSITION POWER INDEXING TOOL BLOCKS ELECTRONIC THREAD CUTTING ATTACHMENT AND REVERSING TABLE DRIVE HARDENED CROSS RAIL WAYS CHIP CONVEYOR FANUC RED-CAP DRIVES 75 HP TABLE MOTOR RETROFIT WITH NEW FANUC 0TT CNC CONTROL IN 1999. INSPECT UNDER POWER

172

ID	MA36518
Make	Okuma
Model	V100R
YOM	2007
Condition	Good Condition
Photo	See Photo
Max. working diameter: 1000 mm Max. outline diameter: 1250 mm Max. working height: 890 mm Max. load weight: 1200 kg Spindle capacity: 110 mm Speed: High-Speed: 8-750 rpm Low-speed: 4-396 rpm ATC-12 Machine floor space: 2725 x 3495 mm Machine height: 3495 mm Machine weight: 13000 kg, Control: OSP-P200L

173

ID	MA36517
Make	OM
Model	VT516N
YOM	2000
Condition	Good Condition
Photo	See Photo
63" dia table VTL, 78.7" swing, w/Fanuc 18T ctrls & 16-Pos Tool Changer Tbl Dia 63 " Swing 78.7 " Height 63 " Tbl load 22,000 lbs Control FANUC 18T Table Speeds 1.6 ~ 250 rpm Main Motor Power 75 hp Number of ATC Stations 16 Floor Space F-to-B 169 " Floor Space L-to-R 205 " Height above the Floor 214 " Approx Machine Weight 42,000 lbs Equipped With: Side Discharge Chip Conveyor All Available Work Holders Installed & Included 48" Extra Height 3-jaw Chuck All Avaialble O-M Propietary Tool Holders in ATC Photos All Available Hard & Soft Jaws With Machine Multitap Transformer Flood Coolant System Mist Collector

174

ID	MA36516
Make	OM
Model	TMZ-10N
YOM
Condition	Good Condition
Photo	See Photo
Control: Fanuc 15-T Table Diameter: 1000mm maximum cutting Dia: 1100mm maximum Cutting height: 750mm

175

ID	MA36515
Make	Gray
Model	RM
YOM
Condition	Good Condition
Photo	See Photo
CNC VTL with Hydro Chuck is equipped with a 5-position Turret, a 48" 3-jaw Hydro Chuck and Chip Conveyor. Tbl Dia 48 " Swing 56 " Height 48 " Control GE Faunc 18-TT Table Speeds High: 14.5 ~ 287 rpm, Low: 4.8 ~ 97 rpm Max Turning Height 54 " Feeds .01 to 120 IPM Installed and Under Power for Inspection

176

ID	MA36512
Make	Doosan
Model	Puma VT900
YOM	2010
Condition	Good Condition
Photo	See Photo
Swing Over Bed 39.4” Swing Over Saddle 27.6” Recom. Turning Diameter 24” Max Turning Diameter 35.4” Max. Turning Length 33.5” X-Axis Travel 18.5” Z-Axis Travel 33.5” Rapid Traverse X and Z 787 IPM Spindle Speed 1800 RPM Spindle Nose A2-15 No. of Tool Stations 12 Spindle Motor 50HP Dimensions 84” x 120” x 143” Machine Weight 27,800 LBS. Doosan Fanuc I Series 32.5” Chuck

177

ID	MA36511
Make	Doosan
Model	Puma V8300
YOM	2018
Condition	Good Condition
Photo	See Photo
swing diameter : 920 mm control : Fanuc i-Series turning speed range : 1,760 rpm total power requirement : 22/60 kW weight approx. : 9,500 kg dimensions (l x w x h) approx. : 2,005 x 2,715 x 3,636 mm 12 position turret 24” chuck Chip conveyor This machine has no gearbox.

178

ID	MA36496
Make	TOS
Model	SKIQ8B
YOM
Condition	Good Condition
Photo	See Photo
SKIQ8BCNC with live spindle Face plate diameter mm 800 max. Workpiece diameter mm 1000 Max. workpiece height mm 750 Max. diameter of external working mm 1000 Z axe mm 630 Face plate revolutions 4 – 400 rpm Main motor output kW 30 (40) Machine dimensions Length mm 4900 Height mm 3830 Width mm 4485 Machine weight kg 16000 Including 15 toolholders + two rotations

179

ID	MA36495
Make	Pittler
Model	PV1250/1-1
YOM	1993
Condition	Good Condition
Photo	See Photo
CNC Vertical Turning & Milling Machine Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis – horizontal 1,300 mm Y Axis – vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 – 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 – 16 rpm Positioning accuracy of C Axis 360° + / - 5 “ Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume.

180

ID	MA36490
Make	Dorries Germany
Model	VCE100S
YOM	1984/2004
Condition	Good Condition
Photo	See Photo
faceplate diameter 1000 mm Technic swing diameter 1600 mm turning height 1200 mm main drive 75 kW faceplate speeds from - to 7 - 800 U/min milling motor 25 kW milling head speed 7 - 3000 U/min milling spindle - taper ISO 50 cross rail adjustment - vertical 800 mm ram head dimension 240 x 240 mm weight of the machine ca. 40 to dimensions of the machine ca. 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling - complete splash housing - coolant device, chip conveyor

181

ID	MA36489
Make	Toshiba Japan
Model	TB-14
YOM	1963
Condition	Good Condition
Photo	See Photo
chuck dia: 1400

182

ID	MA36487
Make	Doosan Daewoo
Model	PumaV550-2SP
YOM	2006
Condition	Good Condition
Photo	See Photo
Control Type Fanuc 18i-TB Table Dia 610mm Swing 800mm Turning Diameter 730mm Max Turning Length 750mm Chuck Size 610mm X-Axis Travel 390mm Z-Axis Travel 780mm X-Axis Rapid Traverse 492 ipm Z-Axis Rapid Traverse 630 ipm Spindle Nose A2-11 Spindle Speed RPM 2,000 Spindle Motor 30 kilowatts Live Tooling no Turret Capacity 10/ea Machine Dimensions 3,810mm x 2,718mm x 3,073mm Machine Weight 16,780 kg EQUIPPED WITH: - Fanuc 18i-TB CNC Control - (2) Rear Exit Chip Conveyors - Coolant Tank - 610mm Right Side Hydraulic Chuck - 533mm Left Side Hydraulic Chuck

183

ID	MA36486
Make	Hankook
Model	VTC100
YOM	2009
Condition	Good Condition
Photo	See Photo
Turn mill Table 1000 Swing 1250 Max. Turning height 800 Ram stroke 800 C axis 0.001 deg. Max table speed 450 rpm Fanuc 21i ATC 16(8T + 8M)

184

ID	MI8910
Make	Hwacheon
Model	ECO-5VR.L
YOM	1998
Condition	Good Condition
Photo	See Photo
Distance Between spindle centerline: 820mm Swing over Bed: 790mm max turning Dia: 550mm max turning Length:400mm Spindle height:1065mm Spindle rpm: 15-1500 Spindle nose: ASA A2-11 Spindle hole size: 100mm Spindle hole taper:1/20 Taper spindle speed override:50-120(rotary Type) Tools:12 Standard cutting Tool size: 25mm Boring Bar Dia: 50mm Control: Fanuc O-T

185

ID	MA36480
Make	EMAG
Model	VL7
YOM	2011
Condition	Good Condition
Photo	See Photo
control FANUC 31i/32i chucking diameter 315 / 400 mm swing diameter 420 mm travel -x axis 850 mm travel -z axis 315 mm control FANUC 31i/32i Turning speeds mainspindle 3.400 U/min numbers of positions in the tool changer 12 driven tools turning speeds 6.000 U/min Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm weight of the machine 10.000 kg Vertical single spindle CNC lathe with driven tools, probe and ITC.

186

ID	MA36476
Make	Doosan
Model	Puma V550
YOM	2012
Condition	Good Condition
Photo	See Photo
turning height: 750 [mm] swing diameter: 730 [mm] control: Fanuc turning speed range: 2000 [rpm] total power requirement: 37 [kW] weight approx.: 9500 [kg] dimensions (l x w x h) approx.: 1900x2700x3100 [mm]

187

ID	MI8897
Make	OMBA,Italy
Model	TCL-150
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
CNC Control : Fanuc Series 18 i - T Table : 1500mm [ Chuck ] Swing : 1800mm Vertical : 1000mm [ Height ] ATC : 16 Tools Spindle Taped : ISO 50 Excellent condition

188

ID	MI8896
Make	OM
Model
YOM
Condition	Good Condition
Photo	See Photo
chuck Dia:1250mm Swing:1500mm Height:800mm 6T control Need to be Retrofit

189

ID	MA36459
Make	Comau
Model	CKN1
YOM
Condition	Good Condition
Photo	See Photo
CNC: NUM 750 TABLE 800 MM MAX TURNING DIAM 900 MM

190

ID	MA36458
Make	STANKO
Model	1531M
YOM
Condition	Good Condition
Photo	See Photo
cnc osai Turning diameter: 1250 mm Face plate: 1120 mm max distance v. faceplate to bottom edge of ram: 950 mm total power requirement: about 22 KW / 380 volts Machine weight: about 12000 kg

191

ID	MI8889
Make	Tos Czech
Model	SKJ-8CNC
YOM	Retrofitted in 2022 as per original standard
Condition	Good Condition
Photo	See Photo
Swing dia : 1100 mm Chuck dia : 800 mm Working height : 650 mm Head : One top head with 5 station auto index turret Chuck : Three Jaw True chuck with hydraulic Clamping Lubrication: Centralized lubrication. Coolant : Independent coolant flow for each turret position. Guard : Hydraulic operated metal safety guard Total Power : 20 H.P. Controller: Brand new A1Interface YantaII CNC control, comprising of AC spindle drive and X/Z motors of 19.6 Nm

192

ID	MI8868
Make	You Ji
Model	VY-800
YOM
Condition	Good Condition
Photo	See Photo
chuck Dia: 610mm Swing Length:1220mm Turning Dia:1016mm Z Travel:850mm RPM: 800 Control: Fanuc OT

193

ID	MI8867
Make	You Ji
Model	VTL1600ATC
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
CNC brand: Fanuc CNC model: Series OI-T Maximum turning diameter : 1.800 mm ø Turning height: 1.200 mm 3-jaw chuck: 1.600 mm ø Spindle taper: MAS BT50 X: -800 +1.015 mm Z: 900 mm Rapid traverse: 0 - 2.000 mm/min Tool changer: 12 Maximum workpiece weight: 8.000 kg Machine dimensions (lxwxh): 5.850 x 4.510 x 5.400 mm Machine weight: 24.000 kg

194

ID	MI8858
Make	TOS
Model	SKJ12
YOM	Rectrofitted in 2018
Condition	Good Condition
Photo	See Photo
Fanuc Series OiMate Td Chuck diameter 1200mm (Manual Chuck) Max Td 1300mm Swing 1400mm Height 1000mm Programmable tool changer

195

ID	MI8756
Make	Hyundai-Kia
Model	SKT-V3L
YOM	2006
Condition	Good Condition
Photo	See Photo
Control : Fanuc-18i Chuck size : 12 Swing over bed : Φ 620 mm Max. workpiece diameter : Φ 500 mm Max. workpiece length : 420 mm Spindle speed : 3000 rpm ATC - 8tool Machine area : 231515352720 mm Machine weight : 5800 kg

196

ID	MI8749
Make	Cooper,India
Model
YOM	2007
Condition	Good Condition
Photo	See Photo
Control : FANUC OTC Chuck size : 600mm Swing : 800mm Hight : 800mm

197

ID	MI8744
Make	BFW,India
Model	BVL550-H
YOM	2012
Condition	Good Condition
Photo	See Photo
Chuck diameter : 400mm Control : Fanuc series OiTd Max Td : 450mm Swing max : 650mm Height max : 550mm spindle nose : A2-8 Spindle motor 18.5/22kw With chip conveyor, stabilizer & standard Accessories

198

ID	MI8743
Make	BFW,India
Model	BVL800-H
YOM	2016
Condition	Good Condition
Photo	See Photo
Control : FANUC Series Oi TF Chuck size : 630mm Max td : 820mm Swing max : 1100mm Height max : 860mm Spindle nose A2-11 Spindle motor 18.5/ 22 kw With chip conveyor , stabilizer & standard Accessories

199

ID	MI8742
Make	BFW,India
Model	BVL700H
YOM	2014
Condition	Good Condition
Photo	See Photo
Control : FANUC Series oi td Chuck size : 530mm Swing max : 800mm Max td 640mm Height max : 700mm Spindle nose A2-11 Spindle motor 18.5/ 22 kw

200

ID	MI8729
Make	BFW,India
Model	BVL700H
YOM	2014
Condition	Good Condition
Photo	See Photo
Control: Fanuc series OiTD Chuck Dia:530mm Max TD:640mm Max TL: 700mm Turret: 8 Stations.

201

ID	MI8728
Make	YU Shine
Model	VI-1600ATC
YOM	2014
Condition	Good Condition
Photo	See Photo \| See Video
Control : Fanuc Swing : 2000mm Table:1600mm Height:1300mm ATC: 16

202

ID	MI8722
Make	Doosan
Model	V3
YOM
Condition	Good Condition
Photo	See Photo
Between spindle center : 605mm Max. cutting dia. : 350mm Max. cutting length : 410mm Spindle center length : 970mm

203

ID	MI8721
Make	Hwacheon
Model	ECO5V.R
YOM
Condition	Good Condition
Photo	See Photo
Distance between spindle centerline : 820mm Swing over bed : 790mm Maximum turning dia : 550mm maximum turning length : 400mm Spindle height : 1065mm

204

ID	MI8707
Make	Hwacheon
Model	ECO5V.R
YOM	1998
Condition	Good Condition
Photo	See Photo
Control: Fanuc O-T Chuck: 500mm Length:400mm

205

ID	MI8701
Make	BFW,India
Model
YOM	2009
Condition	Good Condition
Photo	See Photo
Control fanuc 1200 mm chuck Swing 1400mm Hight 400 mm Very good working condition

206

ID	MI8694
Make	BFW,India
Model
YOM	2009
Condition	Good Condition
Photo	See Photo \| See Video
Control: Fanuc Chuck: 1200mm Swing: 1400mm Height: 400mm

207

ID	MI8681
Make	BFW,India
Model	BVL700H
YOM	2014
Condition	Good Condition
Photo	See Photo
Fanuc Series OiTD Chuck diameter 530mm Max Td 640mm Max TL700mm 8 station turret

208

ID	MI8668
Make
Model
YOM	2021
Condition	Good Condition
Photo	See Photo \| See Video
CNC VTL for retrofit by old imported vtl body Ram type, new ball screw and LM ,750 mm chuck, 1000mm swing new 4 jows dog chuck with 6 tool atc BT 40, with atc or without atc, simple tool post and body cabinet. Running with trial

209

ID	MA36202
Make	Olympia
Model	V180L
YOM	2007
Condition	Good Condition
Photo	See Photo \| See Video
4572 MM CNC VBM With Milling FANUC 18TIB CNC CONTROLS RAM WITH 12 STATION AUTOMATIC TOOL CHANGER C-AXIS TABLE WITH LIVE MILLING TABLE DIAMETER -4496 MM MAXIMUM SWING - 6299 MM MAXIMUM WORK HEIGHT - 3498 MM CROSS RAIL VERTICAL TRAVEL - 3000 MM RAM STROKE - 2000 MM RAM CROSS SECTION - 361 MM X 361 MM TABLE SPEEDS, - .3-40 RPM C-AXIS - 0.001 DEGREE TABLE WEIGHT CAPACITY - 110,000 LBS LIVE MILLING MOTOR - 16 HP LIVE MILLING SPEEDS - 1000 RPM SPINDLE TAPER - CAT 50 FANUC 18I-TB 3-AXIS CNC CONTROLS, PENDANT MOUNTED AUTOMATIC TOOL CHANGER - NOT OPERATIONAL LIVE MILLING SPINDLE - NOT OPERATIONAL 4496 MM 4-JAW CHUCK C-AXIS TABLE DRIVE CHIP & SPLASH GUARDING CHIP CONVEYOR SYSTEM 100 HP MAIN DRIVE MOTOR

210

ID	MI8326
Make	Premier
Model	PTB150
YOM
Condition	Good Condition
Photo	See Photo
With moving cross rail & pentagon turret Work range : Swing dia : 1600 mm Table dia: 1500 mm Admit between the cross slide bottom & table top 800 mm Head design 5 face power indexing turret head Vertical traverse of turret head Z axis 700 mm above cross rail bottom 225 mm below cross rail bottom 575 mm Horizontal traverse of turret head X axis 920 mm to left of table center 40 mm to the right of table center 880 mm Max tool shank accommodation 40 x 40 mm dia of holes in turret 60 mm rotation: uni directional clamping die-clamping : cam operated Cross rail traverse 200 mm x 3 steps 600 mm Capacity: table motor power 45 kw table speed range in 2 ranges 3.5 to 355 rpm max load on the table including fixture 5000 kg Speed & feeds : range of feed x & z axis infinitely variable 1-1000 mm/min or 0.01 to 50 mm/rev rapid traverse of turret 5000 mm/min operating voltage 415+/-6 % volts frequency 50 +/-3 % phase 3 total connected load 150 kva Overall dimension l x b x h : 5500 x 5100 x 5500 mm Weight of basic machine 24000 kg approx CNC specification fanuc oit system Features & Accessories : moving cross rail standard table with 3 jaw self centering hydraulically operated chuck machine cladding centralised lubrication system metallic telescopic covers of cross rail guide ways ac for cnc cabinet machine lamp instruction manual 1 set set of foundation bolts & levelling wedges set of service tools for operation constant surface speed threading function

211

ID	MA35609
Make	Giddings & Lewis
Model
YOM
Condition
Photo	See Photo
TABLE DIAMETER: 60" SWING: 72" HEIGHT UNDER RAIL: 84" RAIL TRAVEL: 72" TABLE SPEEDS: 3 - 280 RPM FEEDS: 0.01 - 250 IPM RAPID TRAVERSE: 250 IPM RAM STROKE: 52" EQUIPPED WITH: GIDDINGS & LEWIS 800B CNC CONTROLS TOOL CHANGER FLOOD COOLANT SYSTEM CHIP/SPLASH GUARDS CHIP CONVEYOR HARDENED COLUMN WAYS PENDANT MOUNTED OPERATOR STATION THREAD CUTTING

212

ID	MA35536
Make	Giddings & Lewis
Model	514
YOM	1998
Condition	Good Condition
Photo	See Photo
FEATURES: HIGH COLUMN OPTION 2438 MM UNDER CROSS RAIL RAM W/ 12 STATION AUTOMATIC TOOL CHANGER G & L 8000 CNC CONTROL 2-PALLET SHUTTLE SYSTEM SPECIFICATIONS: TABLE DIAMETER - 1829 MM MAXIMUM TURNING DIAMETER -2134 MM MAXIMUM HEIGHT UNDER CROSS RAIL -2438 MM RAM VERTICAL TRAVEL, X-AXIS -1575 MM VERTICAL TRAVEL OF CROSS RAIL -1372 MM RAM TRAVEL, LEFT OF CENTER - 1384 MM RAM TRAVEL, RIGHT OF CENTER - 1232 MM RAM CROSS SECTION - 200 MM TABLE SPEEDS, INF. VARIABLE -2 RANGES TABLE SPEEDS, HIGH RANGE - 9 TO 200 RPM TABLE SPEEDS, LOW RANGE - 2-50 RPM RAPID TRAVERSE, RAIL HEAD X & Z AXIS - 400 IPM FEED RATES, VARIABLE X & Z AXES - .01 TO 150 IPM RAIL ELEVATING RATE - 30 IPM EQUIPPED WITH: GIDDINGS & LEWIS 8000 CNC CONTROL 12-STATION AUTOMATIC TOOL CHANGER (2) 1829 MM 4-JAW INDEPENDENT MANUAL CHUCKS WITH PALLET SHUTTLE POWER DRAW BAR RAM W/#60 ANSI B5.50 TAPER ELEVATING CROSS RAIL EXTENDED COLUMN HEIGHT FLOOD COOLANT SYSTEM ADJUSTABLE CROSS RAIL WITH POWER ELEVATION AND CLAMPING HARDENED WAYS ON CROSS RAIL INDEPENDENT AC ELECTRIC SERVO FEED DRIVES 76 MM DIAMETER BALL SCREWS INDUCTOSYN SCALE FEEDBACK PROGRAMMABLE RAIL HEIGHT ADJUSTMENT AUTOMATIC RAIL LEVELING NUMERIPROBE IN PROCESS GAUGING NUMERIDAPT ADAPTIVE CONTROL TOOL TIP PROBING CHIP CONVEYOR WITH ELEVATOR 75 HP MAIN MOTOR

213

ID	MI8008
Make	Schiess,German
Model
YOM
Condition	Good Condition
Photo	See Photo
Chuck - 1800 mm Max Faceplate Dia -2000 mm Swing over dia - 2200 mm Turning Height - 1400 mm Spindle Speed- 150 rpm Variable speed Drive 30 HP Fanuc 0i - TF Plus System Newly Retrofitted

214

ID	MA35254
Make	Phoenix
Model	VTC144/160
YOM	2009
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC 18I-T 4-AXIS CNC CONTROL (2) VERTICAL RAM HEADS (2) 16 STATION AUTOMATIC TOOL CHANGERS PART AND TOOL PROBE CAPACITY: TABLE DIAMETER:3658 MM MAXIMUM SWING:4064 MM HEIGHT UNDER RAIL:1067 MM X-AXIS TRAVEL OF RAM PAST CENTERLINE:610 MM Z-AXIS VERTICAL RAM TRAVEL:914 MM RAM CROSS SECTION:305 MM X 305 MM TABLE SPEEDS:0-100 RPM TABLE SPEED GEAR RANGES:2 TABLE WEIGHT CAPACITY 35 TON Z-AXIS THRUST 12,000 LBS X-AXIS THRUST 12,000 LBS FEED RATES 150 IPM RAPID RATES 300 IPM TABLE POWER 130 HP EQUIPPED WITH: FANUC 18I-T 4-AXIS CNC CONTROL (2) VERTICAL RAM HEADS (2) 16 STATION AUTOMATIC TOOL CHANGERS PART AND TOOL PROBE HARDENED & GROUND BOX WAYS ON CROSS RAIL FIXED RAIL DESIGN FORGED RAMS HEAVY DUTY CASTED BASE, COLUMNS & CROSS RAIL TIMKIN CROSS ROLLER BEARING HARDENED & GROUND TABLE GEAR 2616 MM DIAMETER 76 MM DIAMETER HARDENED & GROUND BALL SCREWS GE/FANUC AC SERVO DRIVES HEIDENHAIN LINEAR FEEDBACK DUAL CHIP CONVEYORS

215

ID	MA35169
Make	O-M
Model	TMSI36-70
YOM	1994
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 3600 MM TABLE W/4-TOP JAWS 50 HP MAIN MOTOR CAPACITY: TABLE DIAMETER 3600 MM MAXIMUM TURNING DIAMETER 7001 MM MAXIMUM TURNING HEIGHT 2896 MM MAXIMUN HEIGHT UNDER RAIL 3000 MM TABLE WEIGHT CAPACITY 100,000 LBS. VERTICAL RAM TRAVEL, Z-AXIS 1500 MM HORIZONTAL TRAVEL OF RAM, X-AXIS 2549 MM TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT MACHINE FOOTPRINT 10414 MM X 6706 MM MACHINE HEIGHT 7772 MM MACHINE WEIGHT 160,000 LBS. EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 3600 MM T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR

216

ID	MA35101
Make	Honor Seiki
Model	VL100A
YOM	2014
Condition	Good Condition
Photo	See Photo
Contraller : FANUC 0iTD Max. swing dia. : 1320mm Max. turning dia. : 1100mm Chuck : Manual 4-jaw chuck Turret : H12, 12ea Table speed : 5-850rpm

217

ID	MA35095
Make	Homma
Model	TAC12F
YOM	1999
Condition	Good working condition
Photo	See Photo
Control : Fanuc 18iT TABLE DIA 1260MM SWING DIA 1600MM Max. Work Height 930MM X-travel 1650 mm Z-travel 900 mm Table speed : 1 ~ 321 rpm Max. table load : 8000 Kg Ram size : 180x180mm ATC 12 tools

218

ID	MA34961
Make	Hardinge
Model	VT200
YOM	2000
Condition	Good Condition
Photo	See Photo \| See Video
FEATURES: FANUC 16-T CNC CONTROL 400 MM CHUCK 12-POSITION TURRET LIVE MILLING PART PROBE CHIP CONVEYOR SPECIFICATIONS: TABLE DIAMETER 400 MM MAXIMUM SWING 648 MM MAXIMUM TURNING HEIGHT 498 MM Z-AXIS TRAVEL 505 MM RAPID TRAVERSE, X-AXIS 472 IPM RAPID TRAVERSE, Z-AXIS 630 IPM LIVE SPINDLE SPEEDS 3-3000 RPM LIVE SPINDLE MOTOR 7.5 HP SPINDLE NOSE A2-11 TABLE MOTOR 30 HP EQUIPPED WITH: FANUC 16-T CNC CONTROL 400 MM 3-JAW POWERHOLD/GAMET CHUCK 12-STATION TURRET RENISHAW LP2 PART PROBE PROVISION FOR TOOL PROBE COOLJET COOLANT SYSTEM CHIP CONVEYOR

219

ID	MA34888
Make	Femco
Model	VL25
YOM	2009
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC OITC CNC CONTROL RAM WITH 8-STATION AUTOMATIC TOOL CHANGER MISC. TOOLING CAPACITIES: TABLE DIAMETER 2700 MM MAXIMUM TURNING DIAMETER 3000 MM MAXIMUM CUTTING HEIGHT 1800 MM X-AXIS TRAVEL 1650 MM Z-AXIS TRAVEL 1150 MM TRAVEL OF CROSS RAIL 1500 MM TABLE SPEEDS, 1.6-160 RPM TABLE LOAD CAPACITY 44,062 LBS. MAIN MOTOR 49 HP/ 45 KW EQUIPPED WITH: FANUC OITC CNC CONTROL RAM W/ 8-POSITION AUTOMATIC TOOL CHANGER DUAL CHIP CONVEYORS MISC. TOOLING 49 HP/ 45 KW TABLE DRIVE MOTOR

220

ID	MI7820
Make	Tongtai
Model	TNC 120V
YOM
Condition	Good Condition
Photo	See Photo
Chuck size ; 1000mm Max swing mm.1600mm Turning height mm.1000Mm Hydraulic Chuck cnc FANUC O T Chip conveyor, books , complete trial

221

ID	MA34862
Make	Tornos
Model	Swiss ST-26
YOM	2013
Condition	Good Condition
Photo	See Photo
9 CONTROLLABLE AXES (X1,Z1,Y1,X2,Y2,C1,X4(XB),Z4,C4) LEAST INPUT INCREMENT 0.001 MM INTERPOLATION METHOD LINEAR / CIRCULAR RAPID TRAVERSE RATE 35 M / MIN Y1, Y2; 30 M / MIN Z1, X4, Z4; 20 M / MIN X1, X2 CUTTING FEEDRATE 1 TO 6,000 MM / MIN FEEDRATE OVERRIDE 0 TO 150%, 10% STEP AMOUNT OF TOOL OFFSET 6 DIGITS MAIN SPINDLE (HEADSTOCK) (Z1 / S1 / C1) NUMBER OF TOOL OFFSET 99 LCD/MDI 10.4" COLOR LCD PART PROGRAM STORAGE SIZE 64 KBYTE TOOL PLATEN (X1 / Y1 / S2) (X2 / Y2) NUMBER OF TOOL POSITIONS 17 (MAIN OPERATIONS) CROSS SECTION OF THE TURNING TOOLS 12 X 12 MM NUMBER OF POSITIONS 5 (FOR ROTATING TOOLS) MAX RPM OF THE ROTATING TOOLS 6,000 RPM EAR AXIS + (2) C-AXIS 2- INDEPENDENT TOOL SYSTEMS 36-TOOL POSITIONS 16-POSITIONS FOR ROTATING TOOLS LNS MODEL ALPHA 320 AUTOMATIC BAR LOADER FANUC SERIES 31I-B CNC CONTROL ROTATING GUIDE BUSHING S1 MOTORISATION FOR ROTATING TOOLS ON THE FRONT TOOL PLATEN S2 MOTORISATION FOR ROTATING TOOLS ON THE REAR TOOL PLATEN S4 MOTORISATION FOR THE ROTATING TOOLS IN COUNTER OPERATIONS AXES C1 + C4 PNEUMATIC PART EJECTOR + CLEANING OF THE COUNTER SPINDLE COLLET WITH COOLANT CENTRAL LUBRICATION SYSTEM 3 COLORS LIGHT TOWER COOLANT PUMP WITH SELF CLEANING FILTER HIGH PRESSURE PUMP 20 BARS – 20 L / MIN TIMER TO PRE-HEAT THE COOLANT MACHINE DESCRIPTION This Tornos Swiss Lathe features 7 Linear Axis + (2) C-Axis, 2 independent tool systems, and 36 tool positions. This CNC Machine comes with 8 positions for rotating tools, a 6,000 RPM rotating tool speed, a 10,000 RPM Spindle Speed, and Fanuc Series 31iB Controls. This CNC Machine was new in 2013. For more information please call us at 312.226.4150. COUNTER SPINDLE (X4 / Z4 / S4 / C4) SPINDLE SPEED 0 - 10 000 RPM MAX BAR CAPACITY 23MM (25.4") STANDARD PART LENGTH WITH A ROTATING GUIDE BUSHING MM 220MM SPINDLE STOP/ START TIME FROM 0 TO 10 000 RPM 0.9 SEC MAIN SPINDLE OUTPUT 9.5 KW (11) MAX CONSTANT TORQUE NM 17 MAXIMUM NUMBER OF TOOLS 36 COOLANT TANK CAPACITY 185 LITERS POWER OF THE COOLANT PUMP 400 W MAX PRESSURE 3 BARS MAX OUTPUT 80 L/MIN (COOLANT PUMP

222

ID	MA34857
Make	Schiess,German
Model
YOM	Retrofitted in 2013
Condition	Good Condition
Photo	See Photo \| See Video
Control : Siemens 840 D Table : Diameter : 3700 mm Speeds : 0.32-40 rpm Max. Load 30 tons Max. Turning dia: 4000 mm Turning height : 2700 mm Ram stroke : 1500 mm Machine weight: ca. 80 tons

223

ID	MA34738
Make	Farrel
Model	Fixed Rail
YOM	2010
Condition	Good Condition
Photo	See Photo
FEATURES: REBUILT & RETROFITTED 2010 WITH GE FANUC O-M CNC CONTROL EXTENDED RAM TRAVEL 2-VERTICAL RAMS 125 TON TABLE CAPACITY FLUSH FLOOR, NO PIT REQUIRED CAPACITY: TABLE DIAMETER 4877 MM MAXIMUM SWING 5131 MM MAXIMUM HEIGHT UNDER RAIL 2794 MM MAXIMUM HEIGHT UNDER TOOL 2616 MM RAM STROKE 2438 MM RAM CROSS SECTION 241 MM X 254 MM FEED RATE 10009 MM/MIN FEED RATE PER ROTATION 0 MM-500 MM RAPID TRAVERSE RATE 4000 MM/MIN TABLE SPEEDS .5-35 RPM RAM TOOLING SANDVIK C-6 TABLE WEIGHT CAPACITY 125 TON MAIN MOTOR 75 KW EQUIPPED WITH: GE FANUC O-M CNC CONTROL, NEW 2010 2-VERTICAL RAM HEADS EXTENDED RAM TRAVELS ADJUSTABLE FIXED CROSS RAIL HYDROSTATIC TABLE BEARINGS, REBUILT 2010 HARDENED & GROUND WAYS FLOOD COOLANT BELLOW TYPE WAY COVERS ON CROSS RAIL CHIP CONVEYOR 75 KW MAIN MOTOR NOTES: REBUILT & RETROFITTED WITH NEW CNC CONTROLS IN 2010. FLUSH MOUNT MACHINE DOES NOT REQUIRE A PIT.

224

ID	MA34737
Make	Farrel
Model	Double Column
YOM	1992
Condition	Good Condition
Photo	See Photo
FEATURES: G & L 8000B CNC CONTROL REBUILT & RETROFIT IN 1992 2-VERTICAL RAMS 200 TON TABLE CAPACITY CAPACITY: TABLE DIAMETER 4877 MM MAXIMUM SWING 6401 MM MAXIMUM HEIGHT UNDER RAIL 3658 MM RAM STROKE 1464 MM RAM CROSS SECTION 330 MM X 330 MM TABLE SPEEDS .5-48 RPM TABLE WEIGHT CAPACITY 200 TON RAM & SADDLE FEEDS .001-999 IPR MAIN MOTOR 75 KW APPROXIMATE WEIGHT 158757 KG EQUIPPED WITH: G & L 8000B CNC CONTROL RETROFIT IN 1992 2-VERTICAL RAMS SPINDLE CHILLER BELLOW STYLE WAY COVERS 75 KW MAIN MOTOR 200 TON TABLE WEIGHT CAPACITY NOTES: INSPECT IN OUR PHILADELPHIA PA WAREHOUSE

225

ID	MA34736
Make	HNK Machine Tool-Korea
Model	VTC 40/50
YOM	2012
Condition	Good Condition
Photo	See Photo
FEATURES: FANUC 18TI CNC CONTROLS RAM WITH 12 STATION AUTOMATIC TOOL CHANGER C-AXIS TABLE WITH LIVE MILLING CAPACITY: TABLE DIAMETER 3998 MM MAXIMUM SWING 4999 MM MAXIMUM WORK HEIGHT 4000 MM RAM STROKE 2000 MM RAM CROSS SECTION 350 MM X 350 MM CROSS RAIL VERTICAL TRAVEL 2500 MM CROSS RAIL POSITIONING 10 X 250 MM STEPS TABLE SPEEDS, 2-SPEEDS 1 TO 50 RPM C-AXIS 0.001 DEGREE TABLE WEIGHT CAPACITY 39916 KG MACHINE WEIGHT 133719 KG LIVE MILLING SPINDLE: LIVE MILLING MOTOR 22 KW / 26 KW LIVE MILLING SPEEDS 15-1500 RPM SPINDLE TAPER CAT 50 EQUIPPED WITH: FANUC 18I-TB 3-AXIS CNC CONTROLS, PENDANT MOUNTED 12 POSITION AUTOMATIC TOOL CHANGER 4009 MM 4-JAW CHUCK RIGHT ANGLE HEAD THRU-SPINDLE COOLANT C-AXIS TABLE DRIVE CHIP & SPLASH GUARDING CHIP CONVEYOR SYSTEM 88 KW / 115 KW MAIN DRIVE MOTOR NOTE: INSPECT IN PLANT UNDER POWER!

226

ID	MA34735
Make	Farrel
Model	Double Column 4-Axis
YOM	2019
Condition	Good Condition
Photo	See Photo
SPECIFICATIONS: TABLE DIAMETER 4267 MM MAXIMUM SWING 4572 MM MAXIMUM HEIGHT UNDER RAM FACE 3099 MM VERTICAL RAM STROKE 2032 MM RAM CROSS SECTION 287 MM X 274 MM DIAMETER OF BORE WITH BOTH RAMS 1016 MM PROGRAMMABLE AXES X-1,Z-1,X-2,Z-2 RAIL ELEVATION W-AXIS TABLE SPEEDS TO 50 RPM TABLE WEIGHT CAPACITY 75 TONS APPROXIMATE FLOOR SPACE 9017 MM L-R, 7137 MM F-B MACHINE HEIGHT, MIN CLEARANCE 5740 MM MACHINE HEIGHT W/ EVERYTHING UP 8306 MM EQUIPPED WITH: FANUC 0I-TF CNC CONTROL (2) VERTICAL RAMS EACH WITH 2032 MM RAM TRAVEL (2) 8-STATION AUTOMATIC TOOL CHANGERS (CAT 60) POWER DRAW BARS ON EACH RAM 4267 MM T-SLOTTED TABLE PENDANT MOUNTED CRT MISC #60 TAPER TOOL HOLDERS STEEL TELESCOPING WAY COVERS ON CROSS RAIL 149 KW AC TABLE DRIVE FULL DOCUMENTATION & MANUALS

227

ID	MA34630
Make	Dorries-Scharmann
Model
YOM	1994
Condition	Good Condition
Photo	See Photo
TABLE DIAMETER: 27' (8230mm) SWING COLUMNS FORWARD: 28' (8535mm) COLUMNS RETRACTED: 42' (12800mm) TABLE SPEEDS LOW RANGE: 0.01 - 2.44 RPM HIGH RANGE: 0.02 - 6.00 RPM TORQUE LOW RANGE: 1,089,200 FT-LBS AT 0.01 - 0.60 RPM HIGH RANGE: 435,750 FT-LBS AT 0.02 - 1.50 RPM TABLE MOTOR: 125 HP TABLE LOAD CAPACITY: 300,000 LBS. (136200kg) EVENLY DISTRIBUTED COLUMN HOUSING TRAVEL: 165"(4191mm) DRIVE MOTOR: 15 HP TRAVERSE RATE: 23 IPM ATTITUDE ADJUSTMENT: +/- 0.001" - 0.125" CROSSRAIL HEIGHT UNDER RAIL: 20" - 140"(508-3556mm) RAIL VERTICAL TRAVEL: 117"(2972mm) DRIVE MOTOR: 25 HP TRAVERSE RATE: 14 IPM LEVEL ADJUSTMENT (MANUAL): +/- 0.001" - 0.125" SADDLE CROSS TRAVEL (EACH SIDE): 221.0" FEED RATES: 0.005 - 1.125 IPR RAPID TRAVERSE: 29.5 IPM MAXIMUM FEED FORCE: 30,000 LBS.(13620kg) RAM TRAVEL LEFT: 84"(2137mm) TRAVEL RIGHT: 67"(1702mm) CLEARANCE UNDER RAM (TOOL REMOVED): 130"(3302mm) FEED RATES: 0.005 - 1.125 IPR RAPID TRAVERSE: 29.5 IPM MAXIMUM FEED FORCE: 15,000 LBS. (6810mm) MAXIMUM REACH OF RAM FROM TABLE: 290"(7366mm) ROUTERS TYPE: TEMPUS# CT55 POWER: 20 HP SPEEDS: 7100 - 14,200 RPM TOOL HOLDERS: 3/4" AND 2" (SQUARE SHANK) OPERATOR PLATFORM CAPACITY: 500 LBS. HORIZONTAL TRAVEL RATE (VAR. AC): 20 - 200 IPM VERTICAL TRAVEL RATE (FIXED PNEUMATIC): 80 IPM ELECTRICAL: 460V/3P/60HZ/520A EQUIPPED WITH: GE FANUC TTA CNC CONTROL HYDROSTATIC MAIN BEARING DIRECT CURRENT PRIME MOVER OPERATOR CAB WITH POWER VERTICAL AND HORIZONTAL MOVEMENT ADJUSTABLE ANGLE MILLING HEADS - CAN BE LOCATED AT BOTTOM OF EITHER RAM OR TOP OF RIGHT HAND RAM.

228

ID	MA34595
Make	Morando
Model
YOM	1980/2015
Condition	Good Condition
Photo	See Photo \| See Video
Table Size: 1700 mm Max turning diameter: 2000 mm, Height Under cross slide: 1800 mm Height under turret: 1500 mm Cross slide rise and fall: 800 mm Ram traverse: 1500mm L-R (Izq-Der) Turret traverse: 1000 mm Max weight on table: 12000 kilos Speeds: 0-30 rpm, 30-74 rpm, 74-155 rpm ATC: 2 x 12 ATC Motor: 75 KW Length: 10000 mm Width: 6000 mm Height: 5700 mm Weight: 37000 kilos CNC: Siemens 840D Colour Graphic Control

229

ID	MI7717
Make	WMW Niles ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CNC : Fanuc OiTF Warranty :-1 year for cnc system chuck dia : 1500mm swing : 1600mm x : 1600mm dia z : 600mm Height : 1000mm chuck speed 100mm chuck speed commendable from cnc Threading Operation(MM/Rev,CSF)Available Turret 5 station Automation Lubrication Chuck power 20 HP Complete new wiring with elements/switch gears. Repeatability/Accuracy 0.010mm Machine H=9.5 feet, W=8 feet, L=8 feet, Weight : Approx 14 Ton

230

ID	MI7716
Make	Jungenthal,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo \| See Video
CNC : Fanuc OiTF warrenty : - 1 year for CNC system chuck dia : 1100mm swing : 14000mm x : 1100mm dia z : 750mm height : 1100mm chuck speed : 10-250RPM chuck speed commendable from cnc Threading operation (MM/Rev, CSF) Available turret 4 station auto index & lock Automatic lubrication chuck power 20hp motor complete new wiring with elements/ switch gears repeatability / accuracy 0.010mm

231

ID	MA34584
Make	BERTHIEZ
Model	LVM 200
YOM	1986/ 2008 RETROFIT CINETIC
Condition	Good Condition
Photo	See Photo
CNC : SIEMENS 840 D Equipped with : C axis - Live tools 20 pocket ATC RENISHAW part and tool probes CAPTO C6 tool post Grinding head APC with 2 pallets dia. 2 000 mm Chip conveyor Spindle chiller Specifications : Chuck Ø 2 000 mm Max. turning Ø 2 500 mm Max. turning height 1 780 mm Ram vertcial stroke 1 250 mm Ram section 240 x 210 mm Motor power 69 kW Chuck speed (2 ranges) 1,6 - 200 RPM, 2 - 250 RPM Rapids 1 to 6 000 mm/min Feed rates 1 000 mm/min Milling spindle taper ISO 50 Milling spindle power 15 kW Milling spindle speed (2 ranges) 1,6 - 670 RPM, 50 - 2 000 RPM

232

ID	MA34583
Make	Froriep German
Model
YOM	REBUILT & CNC RETROFIT IN 1999
Condition	Good Condition
Photo	See Photo
FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONVEYORS 250 HP TABLE MOTOR

233

ID	MA34407
Make	WMW Niles ,Germany
Model	DKZ2000
YOM	1984
Condition	Good Condition
Photo	See Photo
Table diameter - 2000mm Swing with side support - 1850mm Swing without side support - 2000mm Cross rail adjustment - 1150mm Turning height - 1250mm Workpiece's weight - 6000kg Dimensions - 4100x5300x4800mm Weight - 33000kg

234

ID	MI7582
Make	Honor Seiki
Model	VL86A
YOM
Condition	Good Condition
Photo	See Photo
Max. swing diameter: 37.4" Max. cutting diameter: 31.5" Chuck diameter: 24" Spindle Spindle speed: 25-1250 RPM Spindle bearing diameter: 78.7" 2 Speed gearbox Turret Number of tools: 12 Tool shank size: 32 mm, X axis travel; 17.72" Z axis travel: 33.46" X axis rapid travel: 630 IPM, Z axis rapid travel: 630 IPM, Motor Spindle motor: 30/37 kw, X axis servo motor: 4 kw, Z axis servo motor: 4 kw Measurement L X W: 77" x 134 " Machine height: 146" Net weight: 25,350 lbs Total power consumption: 40 KVA CNC Systems Inc 40 Water street

235

ID	MA34167
Make	Schiess Froriep
Model	18Dec16
YOM	1984
Condition	Good Condition
Photo	See Photo
Turning dia : 2000 mm Turning height : 1300 mm Machine weight : 18 tons CNC

236

ID	MA34136
Make	TITAN UMARO
Model	SC33
YOM	Retrofitted in 2010
Condition	Good Condition
Photo	See Photo \| See Video
3m Table 3.3m Swing 1.78m Max Work Height 20Tonne Max Table Weight 100KW Main Servo Motor 1-150rpm Table Speeds Single Ram Ram Travel 1.1m Ram Capcity 250x250mm 30* +/- Swivelling Feeds(X/Z) 1 ÷ 4000mm/min Rapids (X/Z) 6000mm/min 2 Axis SIEMENS 810T System (Could be 840T) with remote hand control 48 Tonne Total Weight

237

ID	MA34135
Make	STANKO
Model	1А525
YOM	1999
Condition	Good Condition
Photo	See Photo \| See Video
Max workpiece :dia 2500mm Max workpiece height : 1600мм.

238

ID	MI7524
Make	DALIAN GUOFENG
Model	CK5116
YOM	2013
Condition	Good Condition
Photo	See Photo
CONTROL – SIMENS 802DSL CHUCK SIZE – 1400 MM SWING DIA – 1700 MM HEIGHT – 1100 MM

239

ID	MA34134
Make	Toshiba
Model	TUE-15
YOM
Condition	Good Condition
Photo	See Photo
Vertical Boring Mill with 59.05'' Table, 4-Jaw Chuck, 70.86'' Turning Diameter, 59.05'' Turning Height, 35.43'' Vertical Ram Travel, Table Speeds 2-250 RPM, Table Capacity 17,600lb, Coolant, Chip Conveyor, Fanuc 0i-TC CNC Control SPECS Convert Specs to Imperial Table Dia 1,498.6 mm Swing 1,803.4 mm Work Ht-U/R 1,719.6 mm Power 29.8 kW RPM 250 RPM Dimensions 184" X 181" X 170" Weight 37,000 LBS

240

ID	MA34109
Make	Tos Hulin
Model	SKIQ12
YOM	1986/2008
Condition	Good Condition
Photo	See Photo
- CNC Control Siemens Sinumerik 840 Di - Faceplate - ATC 15-fold - Chip Conveyor faceplate diameter 1250 mm swing diameter 1500 mm turning height 1570 mm max. ram stroke 1000 mm Tool changer 15 chip conveyor control Siemens Sinumerik 840 Di workpiece weight 12 t faceplate turning speed range 2,5 - 250 U/min workpiece height max. 1250 mm total power requirement ca 40 kW weight of the machine ca. 25 t dimensions of the machine ca. - mfaceplate diameter 1250 mm swing diameter 1500 mm turning height 1570 mm max. ram stroke 1000 mm Tool changer 15 chip conveyor control Siemens Sinumerik 840 Di workpiece weight 12 t faceplate turning speed range 2,5 - 250 U/min workpiece height max. 1250 mm total power requirement ca 40 kW weight of the machine ca. 25 t dimensions of the machine ca. - m

241

ID	MA34107
Make	O-M
Model	NEO-26EX
YOM	2011
Condition	Good Condition
Photo	See Photo
Table dia. : 2600 mm Max. Swing dia. : 2800 mm Max. cutting dia. : 2800 mm Max. cutting height : 2000 mm Max. table load : 20000 Kg Distance from table surface to holder end : 2200 mm Max. torque : 40000 Nm Max. cutting force : 25000 N Crossrail movement (up-down) : 1200 mm Cross rail positioning step : 200 mm x 7 steps Ram movement From table center to right : 2010 mm left : 100 mm Up-down : 1000 mm Ram size : 230 x 230 mm Table speed : 1.0 ~ 39.8 rpm 3.8 ~ 150 rpm (2 steps) Rapid feed rate (X, Z) : 10000 mm/min. Cutting feed rate : 0 ~ 3600 mm/min. Main Motor (Fanuc) : AC 30/37 Kw ATC 12 tools Fixed address type random selection Machine Weight : 26300 Kg

242

ID	MA34073
Make	Tos Hulin
Model	SKIQ20
YOM	1993
Condition	Good Condition
Photo	See Photo \| See Video
Control system Siemens Sinumerik 820 Max. diameter of workpiece 2200 mm Clamping diameter of rotary table 2000 mm Max. load of table 20000 kg Max. workpiece height 1260 mm Ram travel (Z) 1000 mm Tool magazine Number of positions in magazine 15 Machine weight 35000 kg Machine dimensions l x w x h 5000x4000x6000 mm

243

ID	MA33982
Make	Schiess Froriep
Model
YOM	Retrofitted in 2010
Condition	Good Condition
Photo	See Photo \| See Video
Table dia. : 2500 mm Swing dia. : 3500 mm Working height : 2500 mm Head vertical travel : 2000 mm horizontal travel : 2000 mm Ram section : 300 x 250 mm Max. Table Load : 50 Tons Control : Fanuc 0i-T

244

ID	MA33981
Make	OM
Model	TMD35/45
YOM	Retrofitted in 2005
Condition	Good Condition
Photo	See Photo
Control : Fanuc 0T Table dia. : 3500 mm Swing dia. : 4500 mm Shipment : 1 x 40ft FR 1 x 40ft OT 2 x 40ft HQ

245

ID	MI7423
Make	Daewoo
Model	Puma V550
YOM	1999
Condition	Good Condition
Photo	See Photo
Maximum Swing……………………… 31.5″ Maximum Turning Diameter……………. 28.7″ Maximum Work Length………………… 29.5″ X-Axis Travel……………………… 15.4″ Z-Axis Travel……………………… 30.7″ Chuck Diameter……………………. 24″ Spindle Speed Range (2 Speed Gearbox)… 20 To 2,000 Rpm Spindle Motor……………………… 50 Hp Turret……………………………. 10 Positions Maximum Feed Rate…………………. 236 Ipm Machine Size……. 75″ X 107″ X 128″ Tall Machine Weight…. 20,000 Lbs Equipped With: * Doosan Fanuc 18t CNC Control * Chip Conveyor * 50 Hp With 2 Speed Gearbox * Box Way Construction * 21″ 3-Jaw Hyd Chuck (faceplate in photo does not go with machine)

246

ID	MA33843
Make	Tos Hulin
Model	SKJ10BNC
YOM	1981-83
Condition	Good Condition
Photo	See Photo
Table diameter: 1000 mm Maximum turning diameter: 1300 mm Maximum work piece weight: 5000 kg Speed :133-24000 rpm main drive power (max): 40 kW Torque (max) :15000 Nm Power consumption: 65 kW Maximum workpiece height - 1150 mm Caliper horizontal movement - 750 mm Tool holder - turret Number of tools in the magazine - 5 Dimensions: Width 3320 mm Length 4150 mm Width 3400 mm Weight: 13 t

247

ID	MA33800
Make	Tadu
Model	FS-750
YOM	1984
Condition	Good Condition
Photo	See Photo
Swing over bed: 1500 mm, Swing over cross slide:600 mm, Traverse: Z: 350 mm, X:700 mm, Spindle speeds:0-4000 rpm, 4 jaw chuck:1200 mm, Equipped with: Torreta automatica de 6 posiciones Equipment: Automatic 6 station tool post Motor: 20 cv/hp Length: 3810 mm, Width: 1930 mm, Height: 1770 mm, Weight: 6500 kgs

248

ID	MA33787
Make	Berthiez France
Model	TVM1400/125F2
YOM
Condition	Good Condition
Photo	See Photo
Table Diameter:1244.60mm Maximum Swing:1346.20mm B-Axis Rotation:360° (.001° increments) Turning Tools:C5 Capto Milling Tools: CAT50 Turning Speed:550 RPM Milling Speed:2500 RPM Turret Configuration:16 Turning/31 + 5 Milling Automatic EQUIPPED WITH: Fanuc 16i-T CNC Control (2) Pallet Changer w/ Set Up Station for Indicating/Clamping Outside Machine Coolant Through Spindle Renishaw Part Probing Touch Tool Measuring (1) Horizontal C5 Capto Main Block (1) Vertical C5 Capto Main Block (1) Probing Head

249

ID	MA33775
Make	Carnaghi
Model	AT1400
YOM	2008
Condition	Very good condition
Photo	See Photo
CNC Siemens 840 D . ( can control 5 axes ) Diameter Chuck table:1.200 mm . Diameter Swing:1.400 mm . Capacity workpiece:2.000 Kg . Revolution per minute:180 Rpm . Motor power: 60 Kw . Speed gearbox: 2 Maximum workable height:760 mm . Ram with 4 built-in rotary tools (4-position turret tool changer) Chip conveyor

250

ID	MA33768
Make	Schiess,German
Model	S1600
YOM	1986
Condition	Good Condition
Photo	See Photo
Faceplate's diameter - 1600 mm Turning diameter - 2000 mm Workpiece's weight - 10000 kg Machine's weight - 21000 kg CNC Good for retrofit

251

ID	MA33746
Make	Tos Hulin
Model	SKJ20
YOM	Modernization carried out in 2007
Condition	Very good condition
Photo	See Photo
Board diameter: 2000 mm, Max. turning diameter:2300 mm, Max board load: 15000 kg, CAPTO C6 tool clamping system, Right support: 8 tools, Left slide: 4 tools, Electric motor power: 50 kW, Machine weight: 35000 kg, Control:Heidenhain 840D system, Two slide CNC carousel

252

ID	MA33643
Make	Femco,Taiwan
Model	VL12
YOM	new 2004
Condition	Very good condition
Photo	See Photo
Fanuc #18T CNC Control 6 Tool Stations Table Diameter 49.2" - Max Swing 63" Work Piece Weight Capacity 10,000 LBS Max Turning Height 43" Horizontal X-Axis Travel 51" Vertical Z-Axis Travel 42" Spindle Speeds, Range 2.8 to 280 RPM Motor Rating 50 HP

253

ID	MA33543
Make	TOS
Model
YOM	2007
Condition	Working
Photo	See Photo \| See Video
Model: SKJ120A Table dia. 2000 mm Max turning diameter 2300 mm Max. turning height 1500 mm Max. workpiece weight 15000 kg Machine weight 32600 kg

254

ID	MA33468
Make	Djunenthal
Model	JU 14
YOM
Condition	Good Condition
Photo	See Photo
Chuck plate diameter (mm) : 1400 Max turning diameter (mm) : 1600 Max turning height (mm) : 1200 Machine number : 187705 Control SIEMENS SIN 820T RPM / Speed 1 - 240 Z-axis ram displacement (mm) : 1000 Voltage (V) : 400 Hertz (Hz) : 50 Included parts & extra info Automatic tool changer 12 positions Tools

255

ID	MA33467
Make	Dorries-Scharmann
Model	VCE 1400/125
YOM
Condition	Good Condition
Photo	See Photo
Chuck plate diameter (mm) : 1250 Max turning diameter (mm) : 1400 Max turning height (mm) : 975 Construction year : 1990 Control : SIEMENS RPM / Speed 15 - 2000 Z-axis ram displacement (mm) : 600 X-Axis saddle travel (mm) : 1900 Voltage (V) : 400 Hertz (Hz) : 50 Included parts & extra info Automatic tool changer Coolant system Transformer X-axis telescopic bed guides

256

ID	MA33466
Make	Hankook
Model	VTB 140
YOM
Condition	New ,Unused
Photo	See Photo \| See Video
Chuck plate diameter (mm) : 1400 Max turning diameter (mm) : 1600 Max turning height (mm) : 900 Construction year NEW Control FANUC 31iTA (with Manual Guide 1) RPM / Speed 0.8 - 320 Max load (kg) : 8000 Max load (tons) : 8 Z-axis ram displacement (mm) : 900 X-Axis saddle travel (mm) : 1600 Rapid Traverse (mm / min) : 12000 Voltage (V) : 400 Hertz (Hz) : 50 Included parts & extra info Tool Changer 12 Positions Coolant system Transformer X-axis telescopic bed protection

257

ID	MA33463
Make	Hankook
Model	VTC 125E
YOM
Condition	Good Condition
Photo	See Photo
Chuck plate diameter (mm) : 1250 Max turning diameter (mm) : 1600 Max turning height (mm) : 1400 Construction year : NEW Control : FANUC 31iTA RPM / Speed : 3333 Max load (kg) : 8000 Max load (tons) : 8 Z-axis ram displacement (mm) : 900 X-Axis saddle travel (mm) : 1600 Voltage (V) : 400 Hertz (Hz) : 50

258

ID	MA33397
Make	Schiess,German
Model	KZ6000
YOM	Retrofitted in 2006
Condition	Good Condition
Photo	See Photo
Table size: 6000 mm, Max. swing : 6600 mm, Working height: 4000 mm, Weight approx: 16-180 tons With right ram CNC Fagor 8050 CNC table Left ram with DRO table can be opreatedby manual also.

259

ID	MA33393
Make	Schiess,German
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
5- Pos. Turret head, Hydrostatic table bearing AC-main drive motor Siemens AC feed drive motors Siemens Coolant equipment Hydraulic oil cooler (refrigerating)Schimpke Electrical cabinet Vosswinkel machine housing complete Swarf conveyor Faceplate diameter: 1400 mm, Swing diameter: 1600 mm, Turning height: 1000 mm, Ram head vertical travel: 700 mm, Main motor: 60 kW, Control: Siemens 840 C

260

ID	MA33347
Make	Hankook
Model	VTB125E
YOM	2015
Condition	Good Condition
Photo	See Photo
X axis: 1600 mm, Y axis: 700 mm, Z axis: 900 mm, Max. diameter: 1600 mm, Weight: 30000 kg, Control: Fanuc 32i

261

ID	MA33285
Make	Froriep
Model	40KZ350
YOM
Condition	Good Condition
Photo	See Photo
Cnc : n°2 FAGOR 8025 TI Face plate diameter : 3500 mm Max turning diameter : 3800 mm Max turning height : 2300 mm Capacity load table : 40.000 Tons n° esagonal ram : 2 Vertical ram range : 1500 mm Left carriage stroke : 2200 mm Right carriage stroke : 2500 mm Main motor power : 70 kw Plateau rotation speed : 10 - 38 rpm Number of ranges : 2 2 Axial recirculating ball screws diam 80 mm FAGOR motors with built-in planetary gear motor

262

ID	MA33274
Make	Titan Romania
Model	SC25/33
YOM
Condition	Good Condition
Photo	See Photo
Table diameter mm 2500 Workpiece diameter mm 3250 Workpiece max. height mm 1800 Workpiece max. weight (taper rollers bearing) Kgs 18000 Right vertical support slide travel (pentagonal turret) mm 760 Left vertical support slide travel mm 1000 Vertical supports max. angular setting drg 35 Turret holes diameter mm 80 Cross-rail vertical travel mm 1200 Table speed RPM 1.02-92 Working speed mm/min 2-4000 Rapid speed of the working heads mm/min 2-6000 Main DC motor Kw 55 Cross-rail motor Kw 7.5 Weight of the lathe Kgs 48000 Overall dimension - Length mm 5300 - Width mm 5400 - Height mm 5600 The machine will be completely retrofitted and supplied with following brand new components: - General revision of the machine; - Regrinded guideways and plating of the counter guideways with Biplast/Turcite; - the hydraulic unit with components made by CE - the electrical equipment with parts made by Schneider , Shrack, Siemens - old main drive motor - 55 kW – DC with new Siemens drive - the feeds drives motors - Siemens made 20 Nm. - AC brushless - the CNC equipment – Fanuc 0iD or Siemens 808 (by customer choice) - ILC / DROPSA – Italy lubricating components , - HANSA FLEX Germany rubber and metal tubes , - IGUS / BREVITTI Italy cables and tubes conveyors , - TIMKEN , SKF , FAG , RHP , INA bearings ,

263

ID	MA33255
Make	Titan Romania
Model	SC25/33
YOM
Condition	Good Condition
Photo	See Photo \| See Video
1. GENERAL DESCRIPTION OF THE MACHINE The vertical turning lathe SC 25/33 CNC with TWO vertical rail head is designed for machining of large sized castings and fabricated parts of different shapes, by rough and finish operations of: - Inner and outer turning - Plane turning - threading - tapping - drilling The machine is basically designed on the following structure: - the bed and the table - the two column frame, closed by an upper closing cross beam - the cross rail, vertically displaceable along the column guide ways - the rail heads, built for turning - Fanuc 0iTD control, Fanuc AC brushless feeds drive 12 Nm with 1/5 ratio ZF reducers , DC brushless main motor 60 KW with Siemens driver. - Rotary encoders on 4 axis. - SCHRACK, SIEMENS, SCHNEIDER electric components. - REXROTH and HANSA FLEX hydraulic components. - DROPSA , ILC Italy , lubricating components. - TIMKEN, FAG , RHP , INA , SKF bearings. - BALUFF sensors and switch , - TURCITE , BIPLAST anti friction materials , - IGUS , BREVITTI – Italy cables and rubber tubes conveyor , 1.The machine is controlled by the FANUC CNC Unit on the following axes: - the heads horizontal travel ( “X1” and “X2”) - the head rams, vertical travel ( “Z1” and “Z2”) 2. THE MACHINE MAIN TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS M.U.SC25/33 CNC table diameter mm.2,500 swing mm.3,250 work piece maximum height mm.1,800 work piece maximum weight kg.15,000 main drive motor / power AC brushless 60 kW main drive gearbox speed ranges no.3 table speed range,RPM 2--100 cross rail vertical travel mm. 1,400 cross rail drive motor / power AC 7.5 cross rail fast displacement speed mm./min. 400 vertical travel Z1 Mm 760 vertical travel Z2 mm 1200 two feeds drives motors / torque , AC brushless 12 Nm and 1/5 reducer feeds range mm./min. 1 -- 4,000 fast displacement speeds mm./min. 4,000 supply network AC three phase supply voltage / frequency V. / Hz. 400±10%/50± 2% machine overall length mm. 5600 x machine overall width mm.5300 x machine overall height mm.5400 machine net approximate weight kg. 44,000 2 THE MACHINE MAIN UNITS The Bed and the Table The bed and the table are made of special cast iron, with strong ribbing providing a high stiffness of the machine. The main shaft is supported on the bed by means of two taper bearings Timken type. 3.2.The Table Drives The table is equipped with a Heidenhain encoder mounted in the center of the table, with 1,024 pulses,to achieve a working constant speed , feed per revolution , treading. The table drive is achieved by horizontal power line composed by an DC 60 Kw electrical motor with,continuously variable speed, through a 3 speed rangegearbox to secondary spindle and then tothe table spindle.The speed steps are shifted in the gearbox by a hydraulic mechanism. 3.3.The Frame The frame consists in two columns, the bed and an upper closing beam; all these parts are made of,special cast iron for machine tools. The cross rail is displaced along the high precision guide ways of the columns, drive, by an AC asynchronous electrical motor, through two speed reducers and screw - nuts ,mechanism. For high accuracy of the cross rail position, on the columns are fitted every 200 mm special indexing devices. 3.4.The Cross Rail The cross rail is a box type part made of cast iron, properly ribbed, provided with highly accurate grinded guide ways. The cross-rail contents the mechanisms for the horizontal displacement of the heads ( Fanuc feed motors, ZF ratio 5 backlash free reducers, pre-tensed ball screws) supported by precision bearings. The heads displacement are checked by a rotary encoders. The guide ways of the cross frail are protected by covers. 3.5.The Right Vertical Rail Head for turning: The assembly of right vertical working head consist of the right saddle, the ram support and the right RAM with pentagonal turret head with 5 manual rotation. - the saddle, horizontally displaceable along the cross rail guide ways - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism The saddle displacement is measured and checked by a rotary encoder - the ram support, mounted onto the slide - the ram, vertically displaceable inside of the ram support - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5,backlash free reducer and a ball screw - nut mechanism The ram displacement is measured by a rotary encoder and hydraulically balanced. Both the slide ways and the ram support inner surfaces are plated with anti-friction materials,to provide a friction less displacement both (1) of the slide along the cross rail guide ways, and (2) of the ram into the rotary support. 3.6 The Left Vertical Rail Head for turning: The assembly of left vertical working head consist of the left saddle, the ram support and the left RAM with square section 230 X 235 mm. - the saddle, horizontally displaceable along the cross rail guide ways - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism The saddle displacement is measured by a rotary encoder - the ram support, mounted onto the slide - the ram, vertically displaceable inside of the ram support - driven by an AC Fanuc 12 Nm electrical feed motor with continuously adjustable speed, through a ZF ratio 5 backlash free reducer and a ball screw - nut mechanism The ram displacement is measured by a rotary encoder and hydraulically balanced. Both the slide ways and the ram support inner surfaces are plated with anti-friction materials, to provide a friction less displacement both (1) of the slide along the cross rail guide ways, and (2) of the ram into the rotary support. 3.7 Hydraulic installation The hydraulic installation of the machine, made with Rexroth and Hansa Flex components, accomplishes the following functions: - Vertical rams balancing (“Z1” and “Z2” axis); - Cross rail indexing. - Cross rail unlocking; - Gearbox shifting - Lubrication of the gearbox and the table main bearing. 3.8 Electrical equipment The electrical equipment with components Siemens and Schrack consists of an electric cabinet and a control panel. The electric cabinet is placed near the machine. In the cabinet are situated the Fanuc drivers for axis, Siemens driver for main motor the Schneider driver for the 7,5 kW motor of the cross rail and all the conventional components for machine On the pendant displaceable control panel are placed the Fanuc 0iTD CNC and all controls and signaling elements for the machine. The electric equipment of the machine SC 25/33 is designed to permit the use the machine like a manual machine from two joy-sticks placed on the control panel 4. THE MACHINE CONTENT OF DELIVERY 4.1. The Basic Machine - the machine mechanical parts: - the machine bed with rotary table - the taper bearing for the main shaft support - the crown gear for rotary table - the main drive gearbox - the columns and upper cross beam - the cross rail - the two vertical rail heads - the two feeds reducer - the hydraulic unit with components made by Rexroth and Hansa Flex , - the electrical equipment with parts made by Schrack, Siemens, and Schneider. - the main motor driver , Siemens made – 60 kW - the feeds drives motors , Fanuc made 12 Nm. - AC brushless - the CNC equipment – Fanuc 0iTD - ILC / DROPSA – Italy lubricating components , - HANSA FLEX Germany rubber and metal tubes , - IGUS / BREVITTI Italy cables and tubes conveyors , - TIMKEN , SKF , FAG , RHP , INA bearings , - WISCONSIN MACHINERY ball screws , - HENCKEL Germany putty and paint , - Turcite, Biplast anti friction materials 4.2 Normal accessories: - Standard tool holders = 6 pieces - Set of devices for horizontality - Set of 4 jaws - Set of special keys - Set of Operation and Maintenance Manuals 4.3. The Special Accessories – at request - Tool cooling unit with coolant and chip collector . - Enclosure of the machine - Linear scales for X and Z axis Guaranty : 12 months In the price it is included the erection and commissioning to the enduser . The enduser wil pay for the cost of airline tickets for 3 persons; plus the cost of accommodation in India for 3 persons.

264

ID	MA33254
Make
Model
YOM	2009
Condition	Good Condition
Photo	See Photo
Table Diameter:3658 MM Maximum Swing:4064 MM Height Under Rail:1067 MM X-Axis Travel of Ram Past Center line: 610 MM Z-Axis Vertical Ram Travel:914 MM Ram Cross Section: 305 MM x 305 MM Table Speeds: 0-100 RPM Table Speed Gear Ranges:2 Table Weight Capacity:35 Ton Z-Axis Thrust: 5443 KG X-Axis Thrust: 5443 KG Feed Rates: 3810 MM/MIN Rapid Rates: 7620 MM/MIN Table Power:97 KW Complete with: Fanuc 18i-T 4-Axis CNC Control (2) Vertical Ram Heads (2) 16 Station Automatic Tool Changers Part and Tool Probe Hardened & Ground Box Ways on Cross Rail Fixed Rail Design Forged Rams Heavy Duty Casted Base, Columns & Cross Rail Timkin Cross Roller Bearing Hardened & Ground Table Gear 2616 MM Diameter 76 MM Diameter Hardened & Ground Ball Screws GE/Fanuc AC Servo Drives Heidenhain Linear Feedback Dual Chip Conveyors

265

ID	MA33249
Make	Schiess Defries
Model
YOM
Condition	Good Condition
Photo	See Photo
Table chuck diameter : 5500 mm Max swing with moving column bridge : 8100 mm Max height under tool : 2540 mm Ram strokes : 2000 mm ATC with 6 position tool changer – C axis drive Control retro – fitted with Siemens 840C control in 1998 Serial No SD 48 55X816 (1980) Complete with Universal milling head – Heavy duty table jaws – tooling DISMANTLING REMOVAL BUYER RESPONSIBILITY.

266

ID	MA33248
Make	Farrel
Model
YOM	New In 1992. Rebuilt & Retrofitted In 2004(new in 2016)
Condition	Excellent condition,under power
Photo	See Photo
Features * Fanuc OT i CNC Control System (New In 2016) * (New Fanuc OT Control with New Motors and Drives * Live Spindle * Table C-Axis with Heidenhain Rotary Encoder * Two (2) Rams * Quick Change Tooling Specifications. Table Diameter: 4,876 mm Swing : 5,180 mm Spindle Motor: 80 Kw Table Load Capacity: 125 Tons Table Speeds: 0.5 – 35 rpm Height Under Tool: 1,830 mm Ram Size: 240 x 254 mm Ram Travel: 1422 mm Ram Cross Travel:2,895 mm

267

ID	MA33246
Make	Froriep
Model	25KZ-350CNC
YOM	Machine was rebuilt in 2003
Condition	Good Condition
Photo	See Photo
Table Dia-3500 mm Swing-3800 mm Height-2250 mm Table speed-0.38-38 rpm Motor Power-70 kW N.2 CNC ram type vertical tools: Vertical travel: 1500 mm, Complete with Chip conveyor Safety protections The Machine can be shipped in 1 x 20 ft OT 2 x 40 ft OT 1 x 20 ft flat Pack Control:CNC-FAGOR

268

ID	MA33245
Make	Doerries
Model
YOM	1981
Condition	Good Condition
Photo	See Photo
Machine Type: Vertical Turret Lathe - Single Column - CNC faceplate ø -3200mm swing ø -5100 mm turning height -2500mm table load- 60000kg control - Siemens 8T feed range - 0,01-1000 mm/min rapid travel range -6m/min max. ram stroke - 1250 mm slide adjustment - 2000 mm tool change unit - 16 Pos. faceplate turning speed range -stepless- 0,8-100 U/min cross rail adjustment - 1500 mm total power requirement ---- kW weight of the machine ca. - 70 t dimensions of the machine ca. - 9,3x6,1x6,0m Accessories: SIEMENS 8T CNC-control Additionally at extra cost new electrics and a new Siemens Sinumerik 840D control can be retrofitted.

269

ID	MA33244
Make	Schiess,German
Model
YOM	Retrofitted in 2006
Condition	Good Condition
Photo	See Photo
Make-SCHIESS C.N.C.FAGOR, Plate diameter 5000 mm, Maximum turning diameter 5420 mm, Height admitted under cross rail 3500 mm, Motor75 KW – 3 controlled axis

270

ID	MA33240
Make	OM
Model	TMD30-33
YOM	1971 Retrofitted in 1988
Condition	Good Condition
Photo	See Photo
Double Column Table dia. : 3000 mm Swing dia. : 3450 mm Max. Table load : 50 tons Max. cutting height : 2300 mm Max. height from cross rail bottom to table top: 2600 mm Tool bar travel (up-down) : 1300 mm Ram travel (L-R) : 1825 mm Ram swivel (L-R) : 30 deg. Table speed : 0.9 ~ 40 rpm Main motor : AC 60Kw Control: Fanuc 11TT For more information, please refer to the attached specifications sheets. Both rams works simultaneously Dismantled and stored at our warehouse Shipment (please refer to the cargo details) 1 x 40ft FR 1 x 20ft FR 1 x 40ft OT 1 x 40ft HC

271

ID	MA33230
Make	WMW
Model
YOM	Retrofited in 2001
Condition	Good Condition
Photo	See Photo
Control NUM 750 Chuck dia 2800 mm Swing dia 3000 mm Workpiece Turning height 2000 mm Machine weight approximately 45 tons

272

ID	MI7222
Make	Gray
Model	200VBM
YOM
Condition	Good Condition
Photo	See Photo
Chuck diameter: 2500 mm, Swing diameter: 2800 mm, Max. height under rail:2800 mm, max. height under ram: 2500 mm, Vertical ram stroke: 2150 mm, Ram cross section: 380 x 380 mm, Control: Fanuc OT

273

ID	MA33218
Make	Sedin Russia
Model	1L532F3-11
YOM	overhaul and modernization in 2016
Condition	Good Condition
Photo	See Photo
The largest diameter of the workpiece: 3200 mm The maximum height of the workpiece: 860 mm Linear positioning accuracy: 0.01 mm The angular positioning accuracy of: 0.005 degrees. Maximum weight of the processed product: 8 000 kg

274

ID	MA33133
Make	Sedin Russia
Model	1A512MF3
YOM
Condition	Good Condition
Photo	See Photo
Max workpiece diameter : 1250 mm, Max workpiece height : 1250 mm, Faceplate diameter : 1120 mm, Max table load : 10000 kg, Stroke of carriage slide : 800 mm, ATC 10 tools, Faceplate speed stepless : 1 – 335 rpm, Mainspindle power : 55 kW, Total weight : 26 ton CNC Sinumeric 646

275

ID	MA33106
Make	Froriep
Model
YOM	1960/2006
Condition	Good Condition
Photo	See Photo
• Table diameter: 4,200 mm. • Max work piece diameter: 4,500 mm. • Max work piece height: 3,250 mm. • Max work piece weight: 25 tons • Rotation speed of table: 7-35 RPM. • Ram vertical stroke: 1,800 mm. • New electrical equipment, servo motors and CNC SIEMENS 840 D SL. • New ball screws Z-and X-Axis. New measuring system. • Overhauled ram and main motor. New lubrication system. • Camera monitoring.

276

ID	MA33074
Make	Ikegai,Japan
Model	VT1100
YOM	1991
Condition	Very good condition
Photo	See Photo
F-15-T, 3 pallets, Max. swing : φ1400 mm, Max. workpiece dia.:φ1200 mm, Main spindle speed : 200.8min-1, Travel(XZ) : 1100500 mm, with chip conveyor

277

ID	MA33016
Make	KDM
Model	KTM-12/16F
YOM	2008
Condition	Good Condition
Photo	See Photo
Table dia. : 1250 mm Max. Swing : 1600 mm Table Load : Max. 6000 Kg Table indexing : 0.001 deg. Fixed cross rail Distance from table top to tool holder : 900 mm Distance from table top to spindle end : 860 mm Table speed : 1 – 27 – 90 rpm 4 – 107 – 350 rpm 2 step Square ram : 240 x 240 mm Milling head : 2000 rpm X-travel (L-R) - 1480 mm + 1480 mm Z-travel (U-D) - 900 mm Control : Fanuc 18 Shipping Body – wooden box ATC, Chip con, covr, etc. - 1 x 40’ container

278

ID	MA33002
Make	Webster & Bennet
Model
YOM
Condition	Good Condition
Photo	See Photo
Axes: 4 axes Horizontal Stroke ( X axis): 3,911 mm Left hand ram: Vertical stroke (w axis): 965 mm, Right hand ram: Vertical stroke (Z axis): 965 mm, Vertical column stroke ( E axis): 1219 mm, Maximum diameter of work turned with ram:3657 mm, Maximum diameter of work admitted: 3708 mm, Height from face plate to underside of cross slide: Max:2134 mm, Min: 914 mm, Horizontal travel of rams or T slide (Table centre outwards): 2032 mm, Minimum distance between centre of rams: 609 mm, Minimum distance between centre of ram and turret slide: 762 mm, Smallest diameter hole toolholder and rams will enter: 298 mm, Maximum weight load on table: 20,320 kg, Table details: Diameter of faceplate: 3048 mm, Maximum weight load on table: 20,0000 kg, Speed range: 0-60 revs, Speed range 1 : 0-10 revs Speed range 2: 10-35 revs Speed range 3: 35-60 revs Feed rate: Rapid : 3 meters/min, Cutting feed rate: 0-3 m/min, Machine dimensions: Depth (excluding motor): 4,725 mm, Width: 6000 mm, Height: 5,613 mm, Approx weight: 48,762 kg Control: Siemens Sinumerik 840C

279

ID	MA32998
Make	Homma
Model	HTM- 7.0/9.9
YOM	1991
Condition	Good Condition
Photo	See Photo
Control axis: X. Y. Z. C.(Table indexing function) .W (For Cross rail lifting) Table Diameter: 7000MM Between both columns: 9000 MM Maximum working diameter: 9000 MM Set back: 11200 MM Maximum working height: 4000 MM( From the table surface to nose of the cutting tool) Maximum turning length: 11000 MM Maximum loading weight on table: 250000 KG Table rotation speed: 0.25 to 30 RPM Spindle motor: AC 37 / 45KW C axis index minimum number: 0.001 DEGREE Spindle rotation speed: 10 to 1000 RPM Horizontal Travel (X axis): 11300 MM Compound head (Y axis ):10850MM Vertical Travel (Z axis): 3000 MM Cross rail vertical Travel (W axis): 2000 MM CNC Controller: FANUC 15-M X, Y, Z axis: inductosyn scale by HEIDENHAIN 5. Accessories: 12 turning holders Chip conveyor

280

ID	MA32983
Make	Schiess,German
Model
YOM	2006 Retrofitted .
Condition	Good Condition
Photo	See Photo
Table size : 3000 mm Swing Dai : 3500 mm Turning Height : 2500 mm Table 120 rpm with CNC control Fagor 8070

281

ID	MA32982
Make	Schiess Froriep
Model
YOM	1991
Condition	Good Condition
Photo	See Photo
Chuck Diameter : 3500mm Turning Diameter : 4750 mm Turning Height : 3100 mm C Axis : 0.001 Table capacity : 40 tons Table motor power : 75 kw Milling motor power : 12 kw

282

ID	MA32957
Make	Scharmann
Model	VCE1600X140SM
YOM	1991
Condition	Good Condition
Photo	See Photo \| See Video
Control Siemens 850T Faceplate diameter 1400 mm Work piece weight on faceplate max. 9000 kg Turning diameter max. 1600 mm Turning height max. 1500 mm Work piece swing diameter 252 – 1750 mm with open door max. 1820 mm Number of rams 1 Ram cross travel X +/- 950 mm Ram vertical travel Z 1000 mm Max. cutting force at the ram 50 000 N Cross rail vertical travel 900 mm (9 x 100 mm steps) Cross rail speed 425 mm/min Cutting feeds 0.1 – 6000 mm/min 0.01 – 50 mm/rev. Rapids X 8000 mm/min. Z 8000 mm/min. Table drive motor power rating 69 KW Table speed range 0 – 315 rpm Gear steps 2 Step I 2.8 – 78.75 rpm Step II 11.2 – 315 rpm Torque at the face plate max. 40000 Nm Automatic tool magazine/changer 20 positions Tool radius max. 200 mm Tool length max. 675 mm Ram entry diameter min. 340 mm Equipped with: Full chip and splash guarding Internal and external cooling Chip conveyor Elevating cross rail Large package of: tooling, jaws and spares

283

ID	MA32954
Make	Tos Hulin
Model	SKIQ20
YOM	1992
Condition	Good Condition
Photo	See Photo
X = 2200 mm Z = 1400 mm Table diameter Ø 2000 mm Table capacity 12 tons Power 60 kW Speed max. 200 rpm C-axis Driven tools Hydraulic chuck CNC control Philips

284

ID	MA32813
Make	Schiess Froriep
Model
YOM	Retrofit & Recondition: 2005
Condition	Good Condition
Photo	See Photo
Plate diameter: 4200 mm Max. diameter of the work-piece: 4500 mm Max. work-piece height: 4000 mm Max. work-piece weight: 100 t Vertical travel RAM: 2000 mm Horizontal travel RAM: 2600 mm Tool holders (driven tools): ISO 50 Table rotation speed: 40 rpm Main motor: 147 kW Milling spindle and C-axis. C-axis 360.000 positions originally NC machine with one ram of milling spindle CNC: Siemens 840-D C-axis, Live tools

285

ID	MA32788
Make	Carnaghi
Model
YOM	1997
Condition	Good Condition
Photo	See Photo
face plate 1.200 mm swing 1.400 mm turning height max. 1.190 mm RAM stroke (Z-axis) 1.390 mm travel X 1.037 mm travel Y 1.037 mm max. workpiece weight 10.000 kg speed range 2,5-250 min-1 main engine 55 kW ATC 12-fach Siemens 840 C. LxWxH 4,0 x 3,6 x 5,6 m weight of the machine 16.000 kg

286

ID	MA32745
Make	OM
Model	TM2-10N
YOM	1984
Condition	Good Condition
Photo	See Photo
Number of axis: 2 Chuck size: 1000 mm, Spindle speed: 3~500 rpm, Tool storage capacity: 5 pcs, ATC: yes, Max cutting diameter: 1100 mm, Max cutting length: 750 mm, Spindle drive motor: 26 kW, Machine weight: 12 ton, Dimensions (L x W x H): 3.7 x 3.3 x 3.9 m, Product Specification max. turning diameter: 1100 mm, Max. turning length: 750 mm, Chuck size: 1000 mm, Spindle speed: 3~500 r/min, Number of tools: 5 Controller: Fanuc 6T

287

ID	MA32717
Make	Russian
Model	1516F3
YOM
Condition	Good Condition
Photo	See Photo
Max. diameter of working : 1600 mm, Max. working height : 1000 mm, Face plate diameter : 1400 mm, Max. weight of work piece : 6300 kg, Dimensions : 4510 x 3810 x 5615 mm, Weight : 19000 kg, Control: CNC NC-210

288

ID	MA32652
Make	TITAN
Model	SC4044
YOM	2002
Condition	Good Condition
Photo	See Photo
with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conveyor oil cooling device, hand held panel Faceplate diameter: 4000 mm Swing diameter: 4400 mm Turning height: 2060 mm Slide stroke: 1200 mm Ram head dimension: 250 x 250 mm Faceplate turning speed range: 1 - 92 U/min Travel -x axis: 2950 mm Cross rail adjustment: 1800 mm Workpiece weight: 30 t Feeds: 1 - 4000 mm/min Main drive motor: 55 kW Total power requirement: 150 kVA Weight of the machine: ca. 64 t Dimensions of the machine :ca. 9,0 x 7,2 x 6,6 m

289

ID	MA32609
Make	Schiess,German
Model
YOM	1993 overhaul 2009
Condition	Good Condition
Photo	See Photo
CNC VTL with C Axis. Turning width 5500 mm Turning Height 4000 mm Table dia : 5000mm Tool changer: 18 positions table speeds max: 92 rpm with all accessories.

290

ID	MA32608
Make	Schiess Froriep
Model
YOM	2001
Condition	Good Condition
Photo	See Photo
CAPACITY: TABLE DIAMETER : 137" MAXIMUM SWING : 157" MAXIMUM TURNING HEIGHT : 98" VERTICAL RAIL TRAVEL : 78" RAM STROKE : 63" TABLE SPEEDS (INF. VARIABLE) : .9-90 RPM LIVE SPINDLE SPEEDS, (MAX) : 1600 RPM SPINDLE MOTOR (LIVE RAM SPINDLE). 30 HP 30 HP CROSS SECTION OF RAM : 9.8" X 8.2" TABLE LOAD CAPACITY : 88,000 LBS FEATURES: FANUC 16TT CNC CONTROL (2) VERTICAL RAMS LIVE SPINDLE ON LEFT RAM 137" C-AXIS TABLE EQUIPPED WITH: FANUC 16TT CNC CONTROL 137" C-AXIS TABLE COOLANT SYSTEM HARDENED WAYS 134 HP TABLE DRIVE

291

ID	MA32566
Make	Schiess,German
Model	Vertimaster VMG 4-PWS
YOM	2002
Condition	Good Condition
Photo	See Photo
Control: Sinumerik 840D Turning diameter 3200 mm Gantry passage width 3000 mm Workpiece height (turning) 2350 mm Workpiece height (milling) 2310 mm Max. workpiece weight 25 tons Pallet clamping area 3000 mm Width of T-slots 36H12 Palette load 25 tons Revolutions step less for turning 0.5 - 180 rpm Revolutions step less for milling 0.004 - 4 rpm max torque in horizontal table/face plate 75 kNm Main driver input 110 kW Horizontal adjustment of support from mid to left 1900 mm Horizontal adjustment of support from mid to right 2800 mm Horizontal guidance length of support 1000 mm Vertical adjustment of ram 1400 mm Guidance length of ram 1200 mm Section of ram 280 x 240 mm Permitted cutting force for turning 50 kN Boring and milling unit performance 1.4-52-52 kW Spindle revolutions Step 1: 5-180-520 rpm Step 2: 30-1100-3150 rpm Torque at spindle Step 1: 2400-2400-850 Nm Step 2: 450-450-160 Nm Rapid movement/feed speed X/Z-axis 0.1 - 16000 mm/min Crossbeam adjustment vertical step less 1900 mm Crossbeam adjustment speed 4000 mm/min Gantry adjustment Y-axes +/- 1600 mm Adjustment speed of gantry 0.1 - 8000 mm/min 3 integrated chip conveyors Cooling unit: internal coolant supply

292

ID	MA32558
Make	Schiess Froriep
Model	MA80-32 DE
YOM	Retrofit 1998
Condition	Good Condition
Photo	See Photo
Control: Siemens 840 C Diameter horizontal table: 3000 mm Max. load on table: 20,000 Kg Max. torque of horizontal table: 100,000 Nm Max. work piece height: 1500 mm Height table base with horizontal table: 820 mm Distance between table top and floor height: 500 mm Max. swiveling area: 3200 mm Crossbeam support right (from table mid to the right): 1770 mm Crossbeam support right (from table mid to the left): 50 mm Max. adjustment swiveling right, to the right and the left 30° RAM at the right - max. vertical travel 1000 mm Crossbeam - max. vertical travel 1000 mm Revolutions for horizontal table Ratio 1.12 Revolutions area I: 0.8 - 6.3 - 20 min-1 Revolutions area II: 3.15 - 25 - 80 min-1 Characteristic Revolution 6.3 min-1 Revolutions main drive engine 100 - 800 - 2500 min-1 Crossbeam support: Fine feed 0.1 up to 3000 mm/min Section RAM respectively revolver head 240 x 240 mm Max. section tool shaft 40 x 40 mm Max. cutting force at travel 1/3 of total travel 50 kN Crossbeam: traverse speed 500 mm/min Step by step height adjustment 50 mm

293

ID	MA32553
Make	Roman
Model	SC120
YOM
Condition	Good Condition
Photo	See Photo
Max. turning diameter:1420 mm Faceplate diameter:1200 mm, Max. turning height: 1050 mm Max. workpiece weight: 6.000 Kg. Main drive power :45 Kw. Power alimentation: 380V-50 Hz CNC:FAGOR Evacuator chip

294

ID	MA32550
Make	Titan Romania
Model	SC43
YOM	2002
Condition	Good Condition
Photo	See Photo \| See Video
Type of Control: CNC Technical Parameters with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conveyor oil cooling device, hand held panel faceplate diameter 4000 mm Technic swing diameter 4400 mm turning height 2060 mm slide stroke 1200 mm ram head dimension 250 x 250 mm faceplate turning speed range 1 - 92 U/min travel -x axis 2950 mm cross rail adjustment 1800 mm workpiece weight 30 t feeds 1 - 4000 mm/min main drive motor 55 kW total power requirement 150 kVA weight of the machine ca. 64 t dimensions of the machine ca. 9,0 x 7,2 x 6,6 m

295

ID	MA32532
Make	Sedin Schiess
Model	1A525MF3
YOM	1991/ Rebuild 1999
Condition	Good Condition
Photo	See Photo
Table size: 2240 mm Max. swing: 2500 mm Max. material height: 1600 mm Table load: 25 ton Table speeds: 0,27-138 rpm Movement of vertical supports: 1200 mm No of vertical supports: 2 pcs Tool changer on vertical supports w/10 stations Weight of machine: 47 ton Control:Siemens Sinumerik 810

296

ID	MA32507
Make	Schiess,German
Model	3VKE500/900
YOM	Retrofit with new cnc controls 1997
Condition	Good Condition
Photo	See Photo
CAPACITY: TABLE DIAMETER 196.85" MAXIMUM SWING 354.33" MAXIMUM HEIGHT UNDER RAIL 177.16" RAM VERTICAL TRAVEL 90.55" COLUMN TRAVEL 88" TABLE: MAIN MOTOR 120 HP TABLE SPEEDS, STANDARD .25-40 RPM TABLE SPEEDS, CREEP MOTION .0015-.25 RPM TABLE SPEED RANGES, STANDARD & CREEP 4 EACH TABLE TURNING FEEDS 0.0032-.4727 IPR TABLE MILLING FEEDS 0.0984-14.9 IPR TABLE WEIGHT CAPACITY 100 TONS FOUNDATION LOAD WITH WORKPIECE 350,000 LBS MILLING DRIVE: MILLING SPINDLE MOTOR 25 HP MILLING SPINDLE SPEEDS 10-500 RPM MILLING SPEED RANGES 2-RANGES MILLING FEEDS 0.0984-14.9 IPR RAPID TRAVERSE: COLUMN, STANDARD 157.48 IPM COLUMN, CREEP 0.1574 IPM CROSS RAIL, STANDARD 94.49 IPM CROSS RAIL, FINE 2.401 IPM CROSS RAIL, CREEP 0.165 IPM FLOOR SPACE: APPROXIMATE FLOOR SPACE 474" L X 296" W APPROXIMATE OVERALL HEIGHT 339.37" EQUIPPED WITH: FANUC 18-T CNC CONTROL, NEW 1998 SWIVELLING RAM W/LIVE SPINDLE HEIDENHAIN SCALES & ROTARY ENCODER THREADING & ANGULAR TURNING 25 HP SPINDLE DRIVE 120 HP TABLE DRIVE MOTOR 440/3/60 ELECTRICS

297

ID	MA32479
Make	WMW Niles ,Germany
Model
YOM	Retrofited in 2001
Condition	Good Condition
Photo	See Photo
Chuck dia: 2800 mm, Swing dia: 3000mm, Workpiece turning height: 2000 mm, Machine weight approximately: 45 tons. Control:NUM750

298

ID	MA32472
Make	WMW Niles ,Germany
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : WMW Retrofited in 2001 Control NUM 750 Chuck dia 2800 mm Swing dia 3000 mm Workpiece Turning height 2000 mm Machine weight approximately 45 tons .

299

ID	MA32079
Make	Dorries Germany
Model	CT360
YOM	1981
Condition	Good Condition
Photo	See Photo
Max. turning diameter: 4600 mm, Max. turning height: 4400 mm, Control: CNC Siemens Sinumerik 820

300

ID	MA32075
Make	Doerries
Model	VCE 100 S
YOM	1985
Condition	Good Condition
Photo	See Photo
Control: Siemens Sinumerik 840 D Chip conveyor: Knoll built in 2003 Coolant system: Knoll year 2003 Tool magazine: 3-column shelf magazine with 76 tool places Closed workspace with extraction system. Dimensions and travel paths: Faceplate diameter: 1000 mm Circulation diameter: 1600 mm Working height: 1200 mm Crossbar travel: 800 mm Chisel slider: Cross section: 240 x 240 mm Stroke: 1000 mm Vertical travel: 1000 mm Travel horizontally: 950 mm Crossbeam support: adjustability: 800 mm Speeds, feeds, adjustment speeds, cutting forces: Machine table drive: main drive power 75 kW Number of gear stages 2 Speed range 1st gearbox 5-800 min-1 Max. Machine table load 20 t Feed drive: Feed range: 0.1-6000 mm / min 0,01-50 mm / rev Tool system: milling spindle holder SK 50 Cutting force on the support: 50 kN Electrical connection values: Operating voltage 380 V AC Control voltage 220 V DC Frequency 50 Hz

301

ID	MA31986
Make	Hankook
Model	VTB 125E
YOM	2013
Condition	Good Condition
Photo	See Photo
Max. Table / Chuck Diameter 1,250mm Table / Pallet Load 8,000kg Max. Turning Diameter 1,600mm Swing Diameter 1,600mm Max. Turning Height 1,400mm Table RPM 0,9-360 Vertical Travel of Crossrail 700mm Axis Travel - X 1,600mm Axis Travel - Z 900mm Cutting Feedrates - Lowest / Highest 0 / 7,500mm/min Rapid Traverse Rates 7,500mm/min No. of Tools (ATC / Turret) 12 (BT50) Motor - Main Spindle 37 / 45 kW

302

ID	MA31985
Make	TITAN
Model	SC22/3 AXIS
YOM	2007
Condition	Good Condition
Photo	See Photo
Diameter chuck: 2000 mm / Max diameter 2150 mm Turning height: 1450 mm Chuck speeds: 3 to 140 RPM Max. load on table: 12 Ton Milling spindle : speeds 2000 RPM – power 22 Kw Machine weight approx. 34 T Equipped with CNC SIEMENS 840D C-axis and milling tools 2 x tools magazine., no 4 clamping chucks , chip conveyor

303

ID	MA31983
Make	Berthiez France
Model
YOM
Condition	Good Condition
Photo	See Photo
Table dia 2500 mm Turning height 2500 mm Max. Table load 25 tons. with milling Spindle Control ESC Nummeric Italy. Have to change into new control & new Electric. With ATC magazine!

304

ID	MA31950
Make	Homma
Model	TAC-18F
YOM	1998
Condition	Good Condition
Photo	See Photo \| See Video
Control: Meldes 530 LH Table diameter: 1800, 2 Pallet Swing: 2300, ATC - 12 books, Loading weight: 7000 kg

305

ID	MA31939
Make	Titan Romania
Model	SC27 CNC/MS
YOM	2008
Condition	Good Condition
Photo	See Photo
Table dia 2500 mm Turning dia 2650 mm Turning height 1900 mm Max. Work piece load 15 T. Ram size 250 x 250 mm Ram stroke 1200 mm Tool Taper ISO 50 Machine weight 42 T. C Axis.

306

ID	MA31878
Make	Tos Czech
Model	SKJ10BNC
YOM	1980 & 1983
Condition	Good Condition
Photo	See Photo
Ma. turning diameter: 1300 mm, Table/chuck size: 1000 mm, Work piece height: 1150 mm, Work piece weight: 2500 Kg, Horizontal movement support/ ram 750 mm

307

ID	MA31806
Make	Youji,Taiwan
Model	YV1600ATC
YOM	2003
Condition	Good Condition
Photo	See Photo
Table dia: 1600 mm, Max. swing: 2000 mm, Max. cutting diameter: 1800 mm, Max. height under tool:1200 mm, Max. table load: 8 ton X axis travel: 1575 mm, Z axis travel: 900 mm, Vertical travel of crossrail: 800 mm, Spindle speed: 2-250 RPM Spindle diameter: 580 mm, ATC type: 12 tools, Tool shank: BT50, Max. tool size: 350 L x 350 W x 150 H Control: Fanuc 18T

308

ID	MA31783
Make	Toshiba Japan
Model	TSN20A
YOM
Condition	Good Condition
Photo	See Photo
Table diameter: 2000 mm, Maximum swing: 2500 mm, Max. height under ram face: 1849 mm, Vertical travel of ram: 749 mm, Vertical travel of cross rail: 1000 mm, Table speeds: 2.5-125 RPM Table load capacity: 19972 KG, Approximate floor space: 6147 mm x 5486 mm, Approximate machine height:5182 mm, Approximate machine weight: 25963 KG EQUIPPED WITH: GE 1050 CNC Control (Not Operable) 16 Position Automatic Tool Changer Approximately 5 Tool Holders Included 2000 mm Diameter Face Plate w/ 4-Top Jaws Hardened & Ground Box Way Construction Coolant and Chip Guards Automatic Lubrication Telescopic Cross Rail Slide Way Covers 45 KW0HP AC Table Drive Motor NOTE: CNC Control is Not Working Great Frame for Retrofit. Coming Out of Defense Contractor's Facility! Machine is Being Sold As Is, Where Is Machine Must Be Mo

309

ID	MA31751
Make	Tos Czech
Model	SKIQ20
YOM
Condition	Good Condition
Photo	See Photo
Table Diameter:78.74" Maximum Turning Diameter: 86.61" Work Piece Maximum Height: 67.32" Ram Stroke: 39.37" Cross Rail Vertical Stroke: 49.21" Maximum Work Piece Weight:44,000 lbs Table Speeds, 2-Ranges:1.6-160 RPM C-Axis Indexing:001 Degrees Live Spindle Speeds, 3-Ranges:4-3000 RPM Live Spindle Motor:18 HP Table Motor:84 HP Floor Space:265" x 223" Machine Height:212.5" Machine Weight:72,000 lbs EQUIPPED WITH: FANUC 18iT CNC Controls (Retrofit 2010) 78" 4-Jaw Chuck 15-Station Automatic Tool Changer, Turning & Boring C-Axis Misc. Tool Holders Threading Splash and Chip Guarding

310

ID	MA31718
Make	Pietro Carnaghi (Italian)
Model	AC16TT
YOM
Condition	Good Condition
Photo	See Photo
Pallet diameter: 1225 mm, Number of pallets:2 Ma. turning diameter: 1575 mm, Max. turning height under tool: 1600 mm, Max. height under rail: 1850 mm, Table speeds: 1.7-380 RPM, Table motor: 100 HP, Table load capacity: 11,000 LBS, Ram travel: 1225 mm, Ram cross section: 9.5" x 9.5" Equipped with: Fanuc 15TT CNC control, 14" color monitor, Integrated PLC, Rotary type pallet changer Dual 3- jaw hydraulic chucks with 25 mm strokes and independent jaw adjustment, 12 Position tool changer for each ram, C axis positioning, Tool probe, Work probe, 400 gal.coolant system with 100 PSI and 25 GPM flow rate, Heavy duty chip conveyor, Hydrostatic slide ways, Oil chiller Pendent control panel, Large quantity of turning and boring tool blocks, large quantity of chuck jaws

311

ID	MA31499
Make	GILDEMEISTER
Model	CTV 250
YOM	2002
Condition	Good Condition
Photo	See Photo
Chuck Dia 250mm Max. Swing 350mm Dia Max. Turning Length 200mm 12 Station Turret Spindle Speeds 20 –5000 RPM Multiple Production Pallet Shuttle Swarf Conveyor Seimens Sinumerik CNC Controls

312

ID	MA31488
Make	Rafamet Polish
Model
YOM	1990/2000
Condition	Good Condition
Photo	See Photo
4 UNITS YEAR: 1990/2000 CNC SIEMENS SINUMERIK 850 TABLE DIAMETER 1300 MM MAX. DIAMETER 1500 MM ATC 6 TOOLS IN BOTH SIDE MAX. HEIGHT 500 MM

313

ID	MA31280
Make	Umaro,Poland
Model	SC17CNC
YOM
Condition	retrofitted completely
Photo	See Photo
Make : UMARO/ROMANIA Main technical data: FACE PLATE DIA. 1450MM MAX. SWING DIA. 1700MM MAX. TURNING HEIGHT 1100MM MAX. WORKPIECE WEIGHT 8000KG FACE PLATE SPEEDS : 1 – 200 RPM MAIN MOTOR POWER : 55KW Following operations were made to the machine for retrofiting: BALLSCREW ON X AND Z AXIS; FEED MOTORS; REXROTH HYDRAULIC EQUIPMENT; DROPSA MADE OILING SYSTEM; SCHNEIDER ELECTRIC COMPONENTS IN THE CABINET; AIR CONDITIONING IN THE ELECTRICAL CABINET TURCITE PLATED ON ALL THE NECESSARY SURFACE; SIMOREG-SIEMENS DRIVER; GERMAN CABLES SUPPORTS; SIEMENS 808D CONTROLLER; The machine can be equipped with : one ram type with vertical travel 1200mm or pentagonal support type with 5 pos. and vertical travel of 760mm. The table drive is achieved by a 55kW electrical motor with continuously variable speed, through original speed range gearbox. The table is equipped with a rotary encoder, to achieve a working constant speed, feed per revolution, threading. The cross rail is displaced along the high precision guide ways of the columns, driven by an AC asynchronous electrical motor. Counter-guides plated with Turcite (Germany) anti-friction material. Geometrical precision is like to a new machine. GUARANTEE PERIOD: 12 MONTHS FOR MECHNICAL AND ELECTRIC COMPONENTS. OPTIONAL : 6 POSITION TOOL MAGASIN +13.000EUR COOLING INSTALLATION + CHIP TRAY – 9500EUR SECOND VERTICAL SUPPORT: PRICE ON REQUEST DELIVERY TIME : AB. 4 MONTHS FROM ADVANCE PAYMENT.This machine is already retrofitted only the electrical components must be installed. The machine has ballscrew and CNC Siemens 808. The machine can work in manual mode and shows on display as a digital read out system or can be operated as a CNC machine. We send you attached photo from similar machine sold recently. Erection and commissioning can be provided by our company by a separate contract.

314

ID	MA31274
Make	OM
Model	VL6NR
YOM	1989
Condition	Good Condition
Photo	See Photo
FANUS F-0T Control and APC-2, ATC-12 Table dia : 700 mm

315

ID	MA31262
Make	Femco,Taiwan
Model	VL-25M
YOM	2015
Condition	Good Condition
Photo	See Photo
Controller : FANUC 0iTF Max. swing dia. : 3,000mm Max. cutting height : 1,800mm X/Z axis travel : 1,650/1,150mm Vertical travel of crossrail : 1,500mm Table dia. : 2,700mm Max. table load : 20,000kgs Table speed : 160rpm Live spindle speed : 40-3,000rpm BT50 12ATC With C axis RENISHAW part setter Spindle oil cooler Heat exchanger Chip conveyor

316

ID	MA31261
Make	You Ji
Model	YV-1200ATC
YOM	2014
Condition	Good Condition
Photo	See Photo
Controller : FANUC 0i-TD Max. swing dia. : 1,600mm Table dia. : 1,250mm Max. table load : 5,000kgs Max. table speed : 350rpm Max. cutting height : 1,200mm Max. cutting dia. : 1,350mm X/Z axis travel : 930/850mm Vertical travel of crossrail : 750mm BT50 12ATC RENISHAW RMP60 part setter Oil skimmer Spindle oil cooler Air conditioner for electrical cabinet Chip conveyor Machine weight : 22,000kgs

317

ID	MA31258
Make	KOLOMNA
Model
YOM
Condition	Good Condition
Photo	See Photo
Make : KOLOMNA New : 1987/ retro 2012 Control : FANUC 16M Table dia : 4500 mm Max swing : 6800 mm ( It was expanded from 5000 mm to 6800 mm ) Max. table load : 100 tons. Table rotating speed : 1~32 rpm Max. cutting height : 3000 mm Main motor power : 110 Kw It has 2 ram head and simultaeneously move by CNC Control.

318

ID	MA31177
Make	Schiess,German
Model	4K600
YOM	2008
Condition	Good Condition
Photo	See Photo
Chuck Diameter : 6000 mm Max turning diameter : 6600 mm Max height under rail : 3000 mm Max load on chuck : 60 Tonnes Max chuck speed : 25 RPM

319

ID	MA31137
Make	Schiess Froriep
Model	80DV
YOM	2008
Condition	Good Condition
Photo	See Photo
Circular table dia., mm ………… 7500 Max. work piece dia., mm ……. 12000 Max. work piece height, mm …. 8000 Max detail weight, tons ……….… 400 Travels, mm: Z1-axis ……………………….……. 3200 Z2-axis ……………………………… 5800 X1-axis ……………………………… 4100 X2-axis ……………………………… 2800 U-axis … 1250 (PF2500)/ 750 (PF1500) W-axis C-axis Machine weight approx, kg … 650.000

320

ID	MA30861
Make	Toshiba
Model	TSS30/55A
YOM
Condition	Good Condition
Photo	See Photo
Toshiba Vertical Lathe Table 3m Max Dia 5.5m Toshiba Vertical Lathe Model;TSS30/55A Table 3m diameter. Max working diameter 5,500mm H1,900mm Price .

321

ID	MA30827
Make	Farrel
Model	--
YOM	Rebuilt & Retrofit in 1992
Condition	Good Condition
Photo	See Photo
192" Farrel 4-Axis CNC Vertical Boring Mill Specifications: 4877 mm Farrel 4-Axis CNC Vertical Boring Mill G & L 8000B CNC Control Retrofit in 1992 2-Vertical Rams 200 TON Table Capacity CAPACITY: Table Diameter 4877 mm Maximum Swing 6401 mm Maximum Height Under Rail 3658 mm Ram Stroke 1464 mm Ram Cross Section 330 mm x 330 mm Table Speeds .5-48 RPM Table Weight Capacity 200 Ton Ram & Saddle Feeds .001-25375 mm/rev Main Motor 75 KW Approximate Weight 158865 KG EQUIPPED WITH: G & L 8000B CNC Control Retrofit in 1992 Spindle Chiller Bellow Style Way Covers 75 KW Main Motor

322

ID	MA30745
Make
Model	VBM
YOM	1981
Condition	Good Condition
Photo	See Photo \| See Video
160" Summit Vertical Boring Mill Specifications: 4064 mm Summit Vertical Boring Mill FEATURES: (1) Vertical Ram 5-Position Turret Full Pendant Control CAPACITY: Table Diameter 4001 mm Max Swing 4293 mm Max Height Under Rail 2540 mm Vertical Travel Of Cross Rail 2299 mm Turret Stroke 762 mm Ram Stroke 1200 mm Table Speeds (Inf Variable) 1-92 RPM Feeds .002-5 mm/min Rapid Traverse 2489 mm/min Footprint (W x D) 5791 mm x 6998 mm Overall Height 6401 mm Approx Weight 64908 KG EQUIPPED WITH: Full Pendant Controls 5-Position Turret Vertical Ram (4) Adjustable Top Jaws Threading On Turret Head 56 KW Main Motor Inspect In Plant Under Power! condition

323

ID	MA30744
Make
Model	5280 x 40/160
YOM	2009
Condition	Good Condition
Photo	See Photo
6299 mm CKX CNC Vertical Broing Mill with Live Spindle Model : 5280 x 40/160 Siemens 840D CNC Control New 2006 001 Degree C-Axis w/ Heidenhain Rotary Encoder Turning, Milling, Drilling & Threading Cycles Ram With Live Spindle Right Angle Head Table Outrigger Supports for 8 Meter Turning Independant Elevating Operator Platform Steel Sliding Way Covers Chip Conveyor CAPACITY: Table Diameter 6300 mm Turning Diameter 8000 mm Maximum Turning Height 4000 mm Maximum Stroke of Vertical Rams 2500 mm Ram Cross Section 400 mm x 400 mm Cross Rail Travel 3500 mm Table Load Capacity 160 Tons Table Speed Ranges .315-31.5 RPM Table Indexing and Milling Speeds .0002-.2 RPM Table Indexing .001 Degress Main Motor 125 KW Milling Spindle Taper ISO #50 Milling Spindle Speeds, Max 800 RPM Milling Spindle Motor 34 KW Machine Footprint 15113 mm x 10414 mm Machine Height 12395 mm Machine Weight 350 Tons

324

ID	MA30639
Make	Doerries
Model	VCE100
YOM	1985
Condition
Photo	See Photo
SIEMENS SINUMERIK 840C Workspace max. Circulation - 1400 mm max. Distance - Steel rail 800 mm max. Distance - Cross-bar 800 mm max. Meisselweg vertically 750 mm max. Spann - 950 mm max. Workpiece weight 1250 kg depends on the speed Slide Number of carriages on the cross beam 1 Faceplates - 1000mm 2pcs. Speed range 4 - 450 rpm Drive power 63 kW Face plate changing device yes Special facilities closed work space Coolant - High pressure system for drilling Tool measuring

325

ID	MA30581
Make
Model
YOM
Condition
Photo	See Photo
CNC Double Column Vertical Lathe SKD 63/65D 2007 Control System SIEMENS SINUMERIK 840 DE Producer: CKD Blansko Maximal workpiece diameter [mm] 6 500 Maximal workpiece height [mm] 4 500 Maximal workpiece weight [kg] 100 000 Table diameter [mm] 6 300 Maximal table speed [rpm] 40 Power of table drive (Master – Slave) [kW] 2x71 Maximal torque [Nm] 210 000 Crossrail vertical travel [mm] 3 600 Steps [mm] 300 Crossrail movement speed [mm.min-1] 500 Horizontal travel of the ram – X axis [mm] 3 775 Travel over center of the table [mm] 550 Vertical travel of the ram – Z axis [mm] 2 500 Rapid traverse of X and Z axis [mm.min-1] 8 000 Maximal cutting force [N] 100 000 Milling and boring spindle Spindle drive SIEMENS 1FE 1116 Spindle speed [rpm] 2 - 3 000 Spindle drive power [kW] 37,7 Spindle torque [Nm] 1 200 Two steps planetary gearbox I. step i 4,5 : 1 II. step i 1 :1 Spindle taper ISO 50 Weight of the machine [kg] 165 000 Machine dimensions - Length [mm] 13 100 - Width [mm] 9 950 - Height [mm] 11 860 - Height over the floor [mm] 9 910 Equipment • Tool changer – double disc type magazine for 18 rotary tools ISO50 and 6 turning tool holders • Operators platform • Safety fences around the table, doors driven by motor • Chip conveyor around the table • Straight chip conveyor • Tool cooling - for external and internal cooling • Cooling of hydrostatic oil • Workpiece measurement Renishaw • Straight milling head • Angle milling head 90° • Universal angle milling head, adjusted manually • Pick-up magazine for heavy milling heads • Turning tool holders CAPTO C8

326

ID	MA30573
Make	SFAC France
Model
YOM
Condition
Photo	See Photo
Diameter platou: mm 5.000 Diametr in work: mm 5.600 Vertical work: mm 3.400 CNC: FANUC 16T Main power motor: kw 120 Table speed ranges: n° 4 speed table: rpm. 2.3 - 34 Power alimentation: 380W- 50 Hz n° of carri: n° 2 Ram stroke: mm 1850 Wheight: Ton. 140

327

ID	MA30524
Make	Skoda Czech
Model
YOM	Retrofitted in 2008
Condition	Under power
Photo	See Photo
CNC=SENTROL2 TABLE DIAMETER=4000mm SWING=4350mm WORKING HEIGHT=2500mm INSPECTION UNDER POWER AVAILABLE

328

ID	MA30439
Make	Tos Czech
Model	SK16CNC
YOM
Condition	Good Condition
Photo	See Photo
max. diameter of turning left smykadlovým slide 1700 mm max. distance between the clamping plate and knife holder slide left ram 1250 mm max. ram extension Left slide in 660 mm Max. protrusion of the turret slide 550 mm Z Revolving slide cross travel X 1020 mm cross travel slide left ram U 980 mm Clamping plate diameter 1620 mm max. workpiece weight of about 5000 kg max. section of the body knife 40x40 mm Power of main engine control and 30 kW / A 52.3 nominal speed main engine 1475 rev / min. servomotors lateral displacement X, U 22 Nm -3000 rev / min. Servomotors strips Z, V 22 Nm -3000 rpm / min. SERVOSTAR 614 servo inverters hydroaggregate motor power of 2.2 kW (1450 rev / min.) SINUMERIK 840 Di Number of NC axes 5 position measuring axes X, U, Z, V Transducer rotating table hydraulic power unit: - Nominal tank capacity of 30 dm3 - Supplied quantity 10 dm3 / min infinitely variable speed in 4 rows for running left and right: - Series I. 1-12,5 rev / min. - II. range 5 to 27 rev / min. - III. range from 10 to 60 rev / min. - IV. range from 15 to 122 rev / min. rychlopusuv: - Programmed in all slides 5000 mm / min. - In manual mode 4500 mm / min. Machine floor space (WxD) 4550x2670 mm machine height above ground 4630 mm weight machines, including electric. cabinets and units of about 18500 kg max. diameter of turning left smykadlovým slide 1700 mm max. distance between the clamping plate and knife holder slide left ram 1250 mm max. ram extension Left slide in 660 mm Max. protrusion of the turret slide 550 mm Z Revolving slide cross travel X 1020 mm cross travel slide left ram U 980 mm Clamping plate diameter 1620 mm max. workpiece weight of about 5000 kg max. section of the body knife 40x40 mm Power of main engine control and 30 kW / A 52.3 nominal speed main engine 1475 rev / min. servomotors lateral displacement X, U 22 Nm -3000 rev / min. Servomotors strips Z, V 22 Nm -3000 rpm / min. SERVOSTAR 614 servo inverters hydroaggregate motor power of 2.2 kW (1450 rev / min.) SINUMERIK 840 Di Number of NC axes 5 position measuring axes X, U, Z, V Transducer rotating table hydraulic power unit: - Nominal tank capacity of 30 dm3 - Supplied quantity 10 dm3 / min infinitely variable speed in 4 rows for running left and right: - Series I. 1-12,5 rev / min. - II. range 5 to 27 rev / min. - III. range from 10 to 60 rev / min. - IV. range from 15 to 122 rev / min. rychlopusuv: - Programmed in all slides 5000 mm / min. - In manual mode 4500 mm / min. Machine floor space (WxD) 4550x2670 mm machine height above ground 4630 mm weight machines, including electric. cabinets and units of about 18500 kg GO 2008

329

ID	MA30404
Make	O-M
Model	TM2-25/40
YOM
Condition	Good Condition
Photo	See Photo
Table dia: 2,500 mm Max swing: 4,000 mm Vertical height capacity: 2,500 mm CNC control: FANUC 0T Available sub-table size 4,000 mm ONLY one ram controlled by CNC

330

ID	MA30346
Make	WMW Niles ,Germany
Model	DKZ4000x2000B
YOM	1967 Retrofit CNC 2009
Condition	Good Condition
Photo	See Photo
Face plate diameter: 3500 mm, Max. turning height: 2000 mm, Max. turning diameter: 4000 mm, Ram: 2 pieces, max. travel: 1400 mm, Max. table load: 25 ton, Speed face plate: 1-30 rpm, Machine weight: 66 ton, Power: 63 kW, Dimensions L/W/H: 13600 x 9800 x 6750 mm, Control: Siemens 802 D

331

ID	MA30339
Make	Schiess Froriep
Model	12DS
YOM	1990
Condition	Good Condition
Photo	See Photo
Plate diameter : 1000 mm, Fagor.

332

ID	MA30193
Make	Stanko-Russia
Model	1540
YOM	1976 / Retrofit 2008
Condition	Very good condition
Photo	See Photo
Machining diameter : 7100, Passage between amount : 8000 mm, Height under through : 5650 mm, Ram travel: 2750 Cross race : 2750 mm, Maximum load : 180 tons, 2 x NUM : 1060, Speed : 19 rpm, Power : 125 Kw.

333

ID	MA30137
Make	Schiess,German
Model
YOM	Retrofited in 2001
Condition	Good Condition
Photo	See Photo
Faceplate diameter : 2,500 mm, Circulation diameter : 3.150 mm, Rotating height : 1.600 mm, Tool holder VDI : 50 / MK, Ram stroke Max. : 880/950 (R / L) mm, Arm swiveling +/- yes, Horizontal adjustment of the ram support : 1,700 / 1,700 (R / L) mm, Max. Workpiece weight : 20 t, Power requirement : 70 kW, Accessories :- Grinding spindle for the right support with direct measuring system, manual cross bar adjustment, Four clamping claws for the faceplate, control console height-adjustable and swivelable, oil cooler for the gearbox, Hydrostatic bearing, documentation. CNC control for the left Arm FAGOR 8055T. Two - axis digital display, Fabr. Axesta , for the right Arm.

334

ID	MA30128
Make	Chinese
Model	CK5263
YOM
Condition	Good Condition
Photo	See Photo
Max Swing : 6300 mm, Max Working piece height : 3800 mm, Max load : low speed 8PRM or lower 63T, Full speed : 25 t, Table turning speed : 0.34-25.4 rpm/min, Max torque : 225 kN﹒m, Dia. Of table : 5700 mm, Max ram travel : 2000 mm, Max tool holder travels : 3590 mm, Swing of the tool holder : -15°~+30°, Dimension of the tool holder : 60 × 60 mm, Max cutting force Right tool holder (L-750) : 80 KN, Left tool holder (L is the distance between tool tip to tool holder) (L-750) 63 KN, Feeding speed range for the tool holder : 0.13-352 mm/min, Rapid speed of the tool holder : 1920 mm/min, Travel of the horizontal slide : 3610 mm, Speed of the horizontal slide : 230 mm/min, Power of main motor : 100 KW, Dimension of this machine : 6525×14950×9960 mm, Weight : 188 T. CNC system Siemens 802D.

335

ID	MA30114
Make	OM
Model	VC-6NT
YOM	1997
Condition	Good Condition
Photo	See Photo
Max OD: 630 mm, Max swing: 800 mm, Work height: 500 mm, Weight on table: 300 Kgs, ATC-6 Table: 15-1000 rpm, Control: F-21iT

336

ID	MI6635
Make	Pensotti,Italy
Model
YOM
Condition	Good Condition
Photo	See Photo
Power Chuck: 900mm Swing:1100 mm . Cutting height. Elevating rail: 700mm CNC Control

337

ID	MA30105
Make	Hwacheon
Model	VTM2000
YOM	2011
Condition	Good Condition
Photo	See Photo
Max Swing : 2650 mm, Max Working Die : 2500 mm, Max Working length : 2100 mm, Max Loading capacity : 15 ton, Table size : 2000 mm, Rpm : 1-240, Max Torque : 49,862 (5,085 kgf), X axis : 315-1,835 mm, Z axis : 1,000 mm, W axis : 1,100 mm, Moving speed ( X/Z/W) : 10/10/10m/min, Cutting speed(X/Z/W) : 1-2000 mm/min, Table main motor : 75 kw, Milling main motor : 18.5 kw, Moving motor (X/Z/W) : 5.5/5.5/5.5 kw, Chip conveyor, Control system : FANUC Series 31i-MODEL A?

338

ID	MA30098
Make	OM
Model	VC-6NT
YOM	2000
Condition	Good Condition
Photo	See Photo
Max OD: 630 mm, Max swing: 800 mm, Work height: 500 mm, Weight on table: 300 Kgs, ATC-6 Table: 15-1000 rpm, Control: F-21T

339

ID	MA30061
Make	Tos Czech
Model	SK16
YOM	1977/2002
Condition	Good Condition
Photo	See Photo
The biggest turning diameter 1620 mm with side support 1700 mm with cross slide support Distance from the greatest height from the mounting plate The ram crosspiece 1380 mm slides To the knife holder lateral slide mm 1000 The vertical movement of the crossslide 950 mm Clamping plate diameter 1620 mm Workpiece weight kg 5000 Electric motor to drive the clamping plates 37 kW Machine dimensions: width x depth x height mm 4550 x 2700 x 4730 Machine weight ca. kg 18500 Machine is still under power till end of the year than will be dismantled, Control: Sinumeric 810D

340

ID	MA30006
Make	Jungenthal,Germany
Model
YOM	1995
Condition	Good condition,under power
Photo	See Photo
Faceplate diameter 2000 mm max. Swing diameter 2500 mm Turning height 2000 mm Faceplate speeds from - to .63 - 250 rpm Crossbar adjustment - vertical 1000 mm Chisel travel Vertical 750 mm Chisel travel horizontal 1420 mm Main drive motor 75 kW Workpiece weight 16 t Total power requirement 125 kW Machine weight approx. 36 t - 2 Rams - Chip conveyor Control: Siemens 840 C

341

ID	MA29999
Make	Titan Romania
Model	SC43
YOM
Condition	Good Condition
Photo	See Photo
Turning diameter max. : 4.300 mm; Workpiece height max. : 2.000 mm; Workpiece weight : max. 18 tons; Table :- Diameter : 4.000 mm; Speeds range for turning : 1 - 70 rpm; Main motor : 55 kW; Cross rail :- Vertical travel : 1.500 mm; Rapid feed speed : 400 mm/min; Turning head no. 1(left) :- Vertical ram travel (Z axis) : 1.100 mm; Feeds range (infinitely variable) : 10 - 5.000 mm/min, Rapid feed speed : 6.000 mm/min, Turning head no. 2 (can be manual tilting) :- Vertical ram travel (Z axis) : 750 mm; Feeds range (infinitely variable) : 10 - 5.000 mm/min.; Rapid feed speed : 6.000 mm/min.; Head tilting : +/- 30 degree; Power supply : 380 V; Frequency : 50 Hz; Installed power : 85 kW; Machine overall dimensions :- Length : 8.700 mm; Width : 6.000 mm; Height : 5.500 mm; CNC Equipment Siemens SINUMERIK 802Dsl.

342

ID	MA29916
Make	Tos Hulin
Model	SKIQ12CNCB
YOM	1990
Condition	Good Condition
Photo	See Photo
Work piece's heihgt: 1335 mm, Work piece;s diameter: 1500 mm, Capacity: 12000 kg, Dimensions: 5350 x 5240 x 5520 mm, Weight: 27200 kg, Control: CNC Cincinati

343

ID	MA29802
Make	Giddings & Lewis
Model
YOM
Condition	Good Condition
Photo	See Photo
5-Axis Table Diameter: 72" Table Motor: 60 HP Maximum Swing: 84" Height Under Rail: 72" Ram Stoke With Live Spindle: 50" Ram Spindle Taper: 60 Ram Tool Changer: 45 ATC Side Head Taper: 50 Side Head Tool Changer: 16 ATC -EQUIPPED WITH- Moveable Rail Part Probe Tool Probe

344

ID	MA29798
Make	Schiess,German
Model	20DKE160
YOM	1982
Condition	Very good condition
Photo	See Photo
Swing diameter: 2000 mm, Table diameter: 1800 mm, Distance between table and floor: 910 mm, Total height of machine: 4550 mm, Table load capacity: max 12 t, Torque: max 2600 kpm, Rotational speed table: 200 rpm, Crossbeam: Vertical travel of crossbeam: 900 mm, Vertical feed of crossbeam Feed rate: 3,4 mm/min, Rapid feed: 450 mm/min, Carriage of crossbeam, right Outer diameter of work piece roatation: max 1800 mm, Height rotation work piece below normal tool position:max 1075 mm, Distance between table and head stock: 1255 mm, Vertical travel of head stock: max 675 mm, Horizontal travel head to the right (from table centre): max 1120 mm, Horizontal travel head to the left: max 130 mm, Surface of head stock, dimensions: 400 x 400 mm, Lathe tool- square dimensions: 40 x 40 mm, Cross slide: 0-3000 mm/min, Feeds fast: 3000 mm/min, Main motor power: 55 kW, Control: CNC Siemens 810

345

ID	MI6593
Make	Berthiez France
Model	TM200
YOM	1980
Condition	Good Condition
Photo	See Photo
Max cutting height : 3500 mm, X Axis stroke : 2240 mm, Z Axis stroke : 1180 mm, Table Dia : 4000 mm, V Axis stroke (Table movement) : 2000 mm, Ram size : 224 x 224 mm, Table max load : 100 T, Max swing : 8200 mm. CNC 840D.

346

ID	MA29783
Make	Schiess,German
Model	80DV33-750/800/1200-800/400
YOM	1978/2008
Condition	Good Condition
Photo	See Photo
Diameter of a work piece, max :- The frame is max. front position : 8000 mm, The frame is max. back position : 12000 mm, Mass of a work piece : 400 tons, Diameter of a disk chuck of a table : 7500 mm, Travels : Z1-axis : 3200 mm, Z2-axis : 5800 mm, X1-axis : 4100 mm, X2-axis : 2800 mm, U-axis : 1250 (PF2500)/ 750 (PF1500), W-axis, C-axis, Mass of VTL approx : 650 ton. CNC : Siemens Sinumerik 840. Modernization: The purpose of modernization consisted in the following: to make capital repairs of mechanical and hydraulic parts of the machine and to completely update electromanagement, at the same time the volume of functions of the machine is expanded planimetric and 3rd coordinate milling with use of the programmable faceplate and a side support. 1. Repair work. 1.1 Basis and faceplate: • Processing of guides. • Repair of tightening elements with replacement of worn-out details. • Repair of a gear wreath of the faceplate. • Repair of a support of the faceplate and replacement of bearings. • Repair of a reducer of the main drive with replacement of worn-out details and bearings. 1.2 Rack, rack basis: • Basis exhibition. • Processing of guides. • Repair of the driving mechanism of movement of a rack with replacement of worn-out details. • Repair of the running screw of movement of a rack with replacement of a nut. • Repair of gear laths of movement of a side support. • Repair of tightening elements with replacement of worn-out details. • Repair of adjusting and maple levels. • Replacement of scrapers. 1.3 Cross-piece: • Mechanical completion of guides. • Repair of the driving mechanism of movement of a cross-piece with replacement of worn-out details. • Repair of the running screw of movement of a cross-piece with replacement of a nut. • Repair of gear laths of movement of a vertical support. • Repair of tightening elements with replacement of worn-out details. • Repair of adjusting and maple levels. • Replacement of scrapers and a garmonikoobrazny cover for protection of guides. 1.4 Vertical support: • Processing of guides. • Repair of driving mechanisms of movement of a support and vertical the reztsovykh of a sled with replacement of worn-out details. • Repair vertical reztsovykh of a sled. • Replacement of the ball running screw and nut. • Replacement of roller boots. • Repair of adjusting and maple levels. • Repair of tightening elements with replacement of worn-out details. • Repair of unloading cylinders. • Repair of the driving mechanism of a milling spindle with replacement of worn-out details, configuration change (the electric motor – a reducer) and modernization of sealing knot. • Repair of a power shaft of a milling spindle. • Replacement of scrapers. 1.5 Side support: • Processing of guides. • Repair of driving mechanisms of vertical movement of a support, horizontal movement of a horizontal sled and horizontal movement the reztsovykh of a sled with replacement of worn-out details. • Repair horizontal reztsovykh of a sled. • Repair of adjusting and maple levels. • Replacement of ball running screws and nuts. • Repair of tightening elements with replacement of worn-out details. • Replacement of roller boots. • Repair of the unloading cylinder. • Repair of the driving mechanism of a milling spindle with replacement of worn-out details. • Repair of a power shaft of a milling spindle (face teeth and fastenings of the processing heads). • Replacement of scrapers. • Replacement of a chain of a counterbalance. 1.6 Hydraulics: • Replacement of pumps, hydroaccumulators and other elements of hydraulic system by modern analogs. • Replacement of all rubber products (sealing rings, cuffs, sleeves, etc.) 1.7 The processing heads: • Repair with replacement of worn-out details of heads. 1.8 Cooling system: • Repair with replacement of worn-out details. 1.9 Auxiliary mechanisms: • Repair of the platform of the operator, replacement of a chain and cable. • Repair of a waist, replacement of a cable. 1.10 Modernization of electric equipment: • Replacement of a control system of R&D and ChPU Kongsberg, and also all electronics by one ChPU Sinumerik 840D system. • To provide display of information on the rack display in Russian. • Programming has to be carried out as in rectangular, and polar system of coordinates with use of function of linear and circular interpolation. • Replacement of electric motors of the main drive and milling drives. • Replacement of all electric motors of giving. • Replacement of all cables and power electric chains and chains of management with replacement of demountable connections. • Replacement of the main drive and all drives of giving. (sealing rings, cuffs, sleeves, etc.)

347

ID	MA29663
Make	Honor Seiki
Model	VL-125CM
YOM	2014
Condition	Good Condition
Photo	See Photo
Max. swing dia: 1600 mm, Max. cutting height: 1250 mm, Table dia: 1250 mm, Max. table load: 50000 KGS, Spindle speed: 3-300 rpm (stepless), Live tool spindle (sub-spindle) speed: 50-2250 rpm, Cross moving travel: 800 mm (200 mm* 4steps) (Up and down), 24 ATC, BT50, X axis travel: 1150 mm (L 200 + R950 mm), Z axis travel: 900 mm, Control: Fanuc 0i T With chip conveyer, Oil skimmer, ZF gerabox for sub-spindle, Renishaw OMP60 tourch probe, Tool setter (metrol H4A), 90 degree head.

348

ID	MA29634
Make	Hessapp
Model	DV60/1000
YOM	1995
Condition	Good Condition
Photo	See Photo
Max. turning dia: 650 mm, Max. swing dia: 700 mm, Max. turning length :600 mm, Stroke of vertical slide: 600 mm, Stroke of horizontal slide: 600 mm, Spindle dia in front bearing: 160 mm, Spindle head acc. to DIN 55021 Size A 11, Spindle turning speed range N1 23 – 750 rpm, Spindle turning speed range N2 90 – 3000 rpm, Feeds 0.5 – 5000 mm/min, Rapid traverse Max: 10000 mm/min, Main motor: 60 kW, Total power requirement: 80 kW, Weight approx.:9000 kg, Control: CNC 840d

349

ID	MA29580
Make	Wuhan,Chinese
Model	CD5280Ex60/200
YOM
Condition	Good Condition
Photo	See Photo
Max working diameter : 8000 mm, Table size : 7100 mm, Working height : 6000 mm, Table load : 200 tone, With complete C axis, CNC system : Siemens 802D,

350

ID	MA29478
Make	Tos Hulin
Model	SKIQ8B
YOM	1991
Condition	Good Condition
Photo	See Photo
Swing: 1000 x 630 mm, Table dia: 800 mm, Work piece weight: 2500 kg, Main motor: 40 kW, ATC 15 position, Weight of machine: 16 ton, Control: CNC Fanuc Oi-TC

351

ID	MA29376
Make	Schiess,German
Model	16DKE
YOM
Condition	Good Condition
Photo	See Photo
Table: 1.25 mm, Turning diameter (Facing): 1.6 mm, Control: Osai

352

ID	MA29349
Make	Takisawa,Japan
Model	TK2-CNC
YOM	1988
Condition	Good Condition
Photo	See Photo
Chuck size : 8 inch, Max Worksize : 400, Length : 320, X axis travel : 400, Z Axis travel : 320, Main axis : 160-3200 rpm, X axis traverse : 12000 mm/min, Z axis traverse : 16000 mm/min, Motor : AC / 7.5Kw, X axis : F-Model, Z axis : F-Model 10, Chip Conveyor. 2 axis control FANUC 0T. Qty : 2 nos.

353

ID	MA29333
Make	Honor Seiki
Model
YOM
Condition	Good Condition
Photo	See Photo
Size: 1600 mm, With: C axis, Control: OITC

354

ID	MA29332
Make	Honor Seiki
Model
YOM	2009
Condition	Good Condition
Photo	See Photo
Size: 1250 mm, With live tool c axis Control: Fanuc 18ITB

355

ID	MA28774
Make	Tos Czech
Model	SKQ8NC
YOM	1980
Condition	Good Condition
Photo	See Photo
Swing : 800 mm, (face turning 1000 mm) Turning height of workpiece : 720 mm (between head and table 835 mm), Table load : 2500 kg, Table revolutions between : 4-400, Main motor : 30 kW, Dimensions : Width 3360 x Depth 2500 x Height 4520 mm, Weight : 12000 kg. Chip conveyor. 15 to 20 tool holders. to system TESLA NS421 added system TRANS from MEFI.

356

ID	MA28753
Make	Youji,Taiwan
Model	YV1600ATC
YOM
Condition	Good Condition
Photo	See Photo
Maximum diameter:2000 mm, Maximum swing:1800 mm, Table dia: 1600 mm, ATC:12

357

ID	MA28731
Make	Mazak,Japan
Model	MEGATURN A12N M-C
YOM
Condition	Good Condition
Photo	See Photo
Max swing : 1450 mm, Max diameter : 1350 mm, Mazatrol T3.

358

ID	MA28730
Make	Okuma,Japan
Model	VTM120YB
YOM	2007
Condition	Good Condition
Photo	See Photo
Max swing : 1500 mm, Max diameter : 1200 mm, OSP LGi.

359

ID	MA28729
Make	Homma
Model	TAC12M
YOM	1998
Condition	Good Condition
Photo	See Photo
Max swing : 1600 mm, Max diameter : 1250 mm, Fanuc 18TC.

360

ID	MA28719
Make	Okuma,Japan
Model	V100R
YOM	2008
Condition	Good Condition
Photo	See Photo
Max. working diameter: 1000 mm Max. outline diameter: 1250 mm Max. working height: 890 mm Max. load weight: 1200 kg Spindle capacity: 110 mm Speed: High-Speed: 8-750 rpm Low-speed: 4-396 rpm ATC-12 Machine floor space: 2725 x 3495 mm Machine height: 3495 mm Machine weight: 13000 kg, Control: OSP-P200L

361

ID	MA28718
Make	Okuma,Japan
Model	V100R
YOM	2007
Condition	Good Condition
Photo	See Photo
Max. working diameter: 1000 mm Max. outline diameter: 1250 mm Max. working height: 890 mm Max. load weight: 1200 kg Spindle capacity: 110 mm Speed: High-Speed: 8-750 rpm Low-speed: 4-396 rpm ATC-12 Machine floor space: 2725 x 3495 mm Machine height: 3495 mm Machine weight: 13000 kg, Control: OSP-P200L

362

ID	MA28711
Make	Gray
Model	RM80
YOM	1987
Condition	Good Condition
Photo	See Photo
Table diameter : 1219 mm, Maximum swing : 1422 mm, Max height under rail : 1219 mm, Maximum height under turret face : 1346 mm, Turret stroke : 762 mm, Turret horizontal travel : 1524 mm, Table speeds variable : 4.9-287 RPM, Machine Electrics : 460/3/60, Overall height : 4115 mm, Weight : 21331 Kg. Equipped with : GE 2000 CNC control, 4-Position Power indexing turret, 1219 mm T-Slotted face plate, Ball screws & independent drives, Power rail elevation, Power rail clamp, Misc tooling, Flood Coolant, Chip conveyor, Chip & Splash Enclosure, Main motor : 56 Kw.

363

ID	MA28704
Make	JSW,Japan
Model	LT15
YOM	Retrofit in 2010
Condition	Good Condition
Photo	See Photo
Table dia: 4250 mm, Max. work dia: 6300 mm, Height: 4200 mm, Between column: 6500 mm, Dual pendant operated controls Z axis: 2600 mm, Control: Fanuc 32iA

364

ID	MA28686
Make	Sedin Russia
Model	1A516MF3
YOM	1988
Condition	Good Condition
Photo	See Photo
dia 1600mm,height 1250 mm faceplate dia 1400 mm, max. mass of workpiece 15 tons, max. height of cutting tool section 50 mm, max. stroke of carriage slide 800 mm, no. of tools nests in the magazine 10, faceplate speed (stepless control) 0.8-278 RPM, carriage working feed on each axis:(stepless control): 0.01-100 mm/rev, max. rate of carriage positioning traverse 6000 mm/min., max. cutting force 5 tons, max. faceplate torque 35 kN-m, power of main drive 55 kW, sound level at operators position 80 dB, discreteness of point to point traverse 0.001 mm, weight 27 tons,

365

ID	MA28685
Make	Schiess,German
Model	KZ250
YOM	1958 / 2009
Condition	Good Condition
Photo	See Photo \| See Video
Max. turning diameter : 2600 mm, Max. turning height : 1545 mm, Table Diameter : 2500 mm, Ram : 1050 mm, Speed range : 1145-605 U/min Max. table load : 6000 kg, Machine size L x W x H : 5200 x 3750 x 5300 mm, Machine weight ca. : 35 to. SIEMENS 820 T Control in 1995.

366

ID	MA28684
Make	Berthiez France
Model	JA9340
YOM	1960 Retrofitted 2000
Condition	Good Condition
Photo	See Photo
Table diameter :2200 mm, Max. turning diameter : 2800 mm, Table speed : Maxi 125 rpm 6 ranges, Max. turning height : 2000 mm, CNC Control : NUM 1060.

367

ID	MA28668
Make	Russian
Model	1516F3
YOM	1985
Condition	Good Condition
Photo	See Photo
Max. diameter of working : 1600 mm, Max. working height : 1000 mm, Face plate diameter : 1400 mm, Max. weight of work piece : 6300 kg, Dimensions : 4510 x 3810 x 5615 mm, Weight : 19000 kg, Control : Artech NC control NS-210.

368

ID	MA28659
Make	Komatsu
Model	GVH500
YOM	2000
Condition	Good Condition
Photo	See Photo
Table diameter : 1250 mm, (2 Pallets), Max turning diameter : 1600 mm, Max turning height : 1340 mm, Milling : RPM - 12.5-2000, Taper : NT50, Spindle (B axis) indexing degrees : 0.001, Motor : AC11/15 kW, Table :- RPM : 2-360, C axis indexing degrees : 0.001, Motor : AC 30 /37 KW, ATC : 48 stations, Controller Fanuc 180i.

369

ID	MA28657
Make	O-M
Model	TDC12N
YOM	1991
Condition	Good Condition
Photo	See Photo
Max Turning diameter : 1600 mm, Table : 1250 mm, Max Turning height : 940 mm, Milling :- RPM : 20-1200, Taper : NT50, Motor : AC11/15KW, Max drill diameter : 50 mm, Table :- RPM : 2-300 mm, C axis indexing speed : 4RPM, Motor : AC30/37 KW, ATC for cutting 8 stations for turning 16 stations.

370

ID	MA28650
Make	Schiess,German
Model	16DSC-125P
YOM	1988
Condition	Good Condition
Photo	See Photo
Face plate diameter: 1250 mm, Diameter of processing: 1600 mm, Length of processing: 1460 mm, Work piece weight: 8000 kg, Table length: 1250 mm, Z axis travel: 1400 mm, Control: CNC Fanuc.

371

ID	MA28647
Make	Kolomna Russia
Model	KU428F1
YOM	Recondition 2013
Condition	excellent working condition
Photo	See Photo
Working maximum diameter : 5000 mm, The maximum height : 3200 mm, Faceplate diameter : 5000 mm, Calliper occurrence of the maximum angle : -15 ° to + 30 °, Faceplate placed on maximum product weight : 125000 kg, Table speed range : 0.27 to 24.8 min-1, Feed range from 0.0352 to 285 mm / min, Main motor power : 180 kW, Height above floor level : 8300 mm, Number tool holder : 2, Dimensions Length : 7300 mm, Width : 12900 mm, Height : 9800 mm, Weight : 190,000 kg. Recondition 2013 with new ball screws & spindle.

372

ID	MA28555
Make	Kolomna Russia
Model	1563
YOM	1963
Condition	excellent working condition
Photo	See Photo
Table Diameter : 6300 mm, Column to Column : 6300 mm, Height from table to cross rail : 3690 mm, Height from table to tool holder : 3550 mm, Machine Weight : 223 Tons. Max work load : 125 Tons, Max work Height : 4000 mm, Max work diameter : 6300 mm, Ram Stroke : 2000 mm, Min work hole diameter : 400 mm, Ram size : 310 mm X 350 mm, Ram angle [inner/outer] : 30/15 deg, Table rotation speed : 4 X stepless 0.3 TO 25 RPM, Cutting feed speed [X-axis] : stepless : 0.04 TO 285 mm/min, Cutting feed speed [Z-axis] : stepless : 0.04 TO 285 mm/min, High speed feeder [X-axis] : 2400 mm/min, High speed feeder [Z-axis] : 2400 mm/min, Machine Size : 14200 X 8200 X 9800 mm, Machine gross wight : 223 tons. Control : CNC System, Drives of with Ball screw. 2 Grinding Heads.

373

ID	MA28396
Make	Titan Romania
Model	SC22
YOM	1986 Retroffited in Germany 2009
Condition	Excellent condition,under power
Photo	See Photo
Turning diameter: 2200 mm, Table diameter: 2000 mm, Turning height: 1900 mm, Table load: 15000 kg, Speed: 140 1/min, Tool changer: 12, Drive power: 55 kW, Weight: 33000 kg, Control: Fanuc Oi-TD

374

ID	MA28388
Make	Dorries Germany
Model	CTE3000-4500
YOM	1982 / Retrofitted 2008
Condition	Good Condition
Photo	See Photo
Table dia: 3000 mm, Swing dia: 4500 mm, Turning height: 2650 mm, Ram travel: 1450 mm, Ram size: 250 x 250 mm, Max. job weight: 25 ton, Control: CNC Sinumerik 840D, With ATC

375

ID	MA28382
Make	Hessapp
Model	DV120
YOM	1999
Condition	Very good condition
Photo	See Photo
Face plate diameter : 1200 mm, Turning Diameter : 1000 mm, Swing Diameter : 1250 mm, Turning Height : 1000 mm, Main Spindle :- Cylindrical spindle taper – diameter : 640 mm, Spindle diameter front bearing : 500 mm, Spindle speed 1. gear step : 3,15 – 112 min-1, Spindle speed 2. gear step : 12,5 – 450 min-1, Power : 63 kW, Cross slide :- Total travel X-axis : 1400 mm, Travel X-axis from spindle centre to the left side : 1022 mm, Travel X-axis from spindle centre to the right side : 378 mm, Travel Z-axis : 700 mm, Ram stroke (stroke extension) Z-axis : 300 mm, Ram section 220 x 217 mm, Rapid feed X- and Z-axis : 14000 mm/min, Tool magazine :- Number of tools : 40, Tool taper DIN 69880 VDI 60, Tool length max. : 380 mm, Tool weight max. : 35 kg, Machine dimensions L x W x H ca. : 10,8 x 4,2 x 4,2, CNC Control SINUMERIK 840 C. Machine weight ca. : 22 ton. Accessories :- Manual face plate ø 1.200 mm, hydraulic clamping cylinder for additional power chuck, vertical stroke extension Z-axis-hydraulical, the working position are in both end positions in clamped state, chip conveyor, without coolant tank (has been connected on a central coolant). Qty : 3 nos.

376

ID	MA28354
Make	Farrel
Model
YOM	1971/Retrofitted in 2012
Condition	Good working condition
Photo	See Photo
Table diameter: 4300 mm, max. swing: 5100 mm, Working height under rail: 4300 mm, Ram movement up and down: 2400 mm, Main motor: 75 KW, Control: Fanuc 18T CNC

377

ID	MA28340
Make	Morando
Model	VLN14
YOM	1985
Condition	working condition ,under power
Photo	See Photo
Table size: 1450 mm, Swing dia: 1730 mm, Height under cross slide: 1300 mm, Cross slide rise and fall: 900 mm, Ram rise and fall: 950 mm, Cross traverse: ram 1250 mm, Input: 69.5 kW, Fitted with: 12 station automatic tool changer and renishaw probe, Equipment: 11 x tool holders, Control: Simens Sinumeric

378

ID	MA28322
Make	Titan Romania
Model	SC33
YOM
Condition	Good Condition
Photo	See Photo
Table Dia : 3000 mm, Max turning dia : 3300 mm, Max height of work piece : 2300 mm, Max Weight of the work piece : 18,000 kgs, Table speed range : 1.02-92 RPM, Working feed range : 0.05-5 mm, Rapid traverse : 2500 mm, Main motor power : 55 kW, Overall dimensions : 5600 x 5300 x 5400 mm, Weight of the machine : 47350 kg, Control: Fagor

379

ID	MA28319
Make	Hessapp
Model	DV42-2
YOM	1993
Condition	Good Condition
Photo	See Photo
Swing diameter : 500 mm, Turning diameter : 400 mm, X-stroke : 350 mm, Z-stroke : 400 mm, Turret with 4-station, Max. workpiece weight : 500 kg, Spindle speed range : 50/ 710/ 1800 rpm, Driving power : 2/ 29/ 29 kW, Rapid traverse max. : 14,000 mm/min., Machine weight : 22,000 kg, Control system : Siemens

380

ID	MA28284
Make	Froriep German
Model	KZ310-350-360
YOM	1967 (Retrofit 1989)
Condition	Good Condition
Photo	See Photo
4Jaw face plate: 3100 mm, Max swing: 3600 mm, Max height: 3600 mm, Ram head travel: 2200 mm, Vertical rail travel: 3000 mm, Max. load: 35 ton, R.P.M.: 0,32-40, HP: 85, Cycles: 50 Control: Fagor 8035, Including: 2 x ram head 250 x 250 mm, Chip conveyor, Mist extraction unit, Coolant system.

381

ID	MA28281
Make	Doosan
Model	Puma V550
YOM	1982
Condition	Good Condition
Photo	See Photo
Rolling diameter on the desk : 800 mm, Max. turning diameter : 730 mm, Max. turning height : 750 mm Junction ASA : 11, Speed rotation rpm : 20-2000, Power AC motor (cont./30min.) : 30/37 kW, Control :Fanuc 21I-TB.

382

ID	MA28276
Make	Sedin Russia
Model	1A512MF3
YOM
Condition	Excellent condition,under power
Photo	See Photo
Max workpiece diameter : 1250 mm, Max workpiece height : 1250 mm, Faceplate diameter : 1120 mm, Max table load : 10000 kg, Stroke of carriage slide : 800 mm, ATC 10 tools, Faceplate speed stepless : 1 – 335 rpm, Mainspindle power : 55 kW, Total weight : 26 ton, Controller SIEMENS 840 D retrofitted. With new electro cabinet. New wiring. New servo drives. Measuring system HEIDENHAIN.

383

ID	MA28275
Make	Kolomna Russia
Model	1532T
YOM	1990 Rebuilt in 2003
Condition	Very good condition,Under power
Photo	See Photo
Faceplate diameter : 3200 mm, Turning diameter : 3200 mm, Max. workpiece height : 2000 mm, Max. workpiece weight : 40 Ton, Turning speed : 4-62 rpm (4 ranges), Main motor power : 75 kW, Crossrail vertical travel : 1873 mm, Horizontal Ram travel : 1960 mm (both), Saddle vertical travel : 1250 mm (both), Weight of the machine : 93,000 Kg, CNC Fagor 8025 T-I (2 control units). Additional information :- Full enclosed guarding, 2 slides individually controlled by CNC .

384

ID	MA28272
Make	Froriep German
Model	200-63KZ1000-1500CNC
YOM	Refurbished in 1999
Condition	Good Condition
Photo	See Photo
Face plate diameter: 10000 mm, Swing diameter: 15000 mm, Turning height: 5000 mm, Max. ram stroke: 2000 mm, Face plate turning speed range: 0,13-13 U/min, Work piece weight: 200 ton, Feed per revolution: 3 mm, Rapid traverse: 1630 mm/min, Vertical feeds: 0,00196-40 mm/U, Feed range-Horizontal: 0,00196-40 mm/U, Table drive: 186 kW, Cross rail motor: 30 kW, Cross rail adjustment: 64 kW Control: Siemens 840D CNC Equipped With: Dual pendant operated controls and dual operators platforms, 2-vertical CNC controlled ram, 4-heavy duty face plate type jaws, Hydrostatic bearing system for table, Dual chip conveyors.

385

ID	MA28104
Make	Schiess,German
Model	KE160
YOM	1970
Condition	Good condition,under power
Photo	See Photo
Table diameter : 1600 mm, Swing diameter : 1800 mm, Height : 1250 mm, CNC control NUM 1060.

386

ID	MA28101
Make	Daewoo Puma
Model	V15-3A
YOM	1998
Condition	Good Condition
Photo	See Photo
Max Swing : 787 mm, Max Turning Diameter : 637 mm, Max Turning Length : 640 mm, Spindle Motor : 40 HP, Spindle Speed : 2,500 RPM, Rapid Traverse Rate : X 472 IPM, Rapid Traverse Rate : Z 630 IPM, X-Axis Travel : 470 mm, Z-Axis Travel : 628 mm, Turret Position : 12, Live Milling RPM : 2500 RPM, Machine Dimensions : 3750 x 2600 x 2900 mm, Machine Weight : 39,600 lbs. Equipped With :- Live Tooling, 375 mm 3-Jaw Hydraulic Chuck, Auto Lube System, Boxed Ways, Chip Conveyors, RS-232C Port Interface, C-Axis Table Movement, Wired 220 Volt Electric, All Available Manuals.

VKengg.co.in

Category : Turning Machines

Sub-Category : Lathe Vertical Turning CNC